QUICK START
Introduction
Contents
❚
❚
Names and functions of buttons and
controls..............................................2
Thank you for purchasing the Roland XP-80 Music
Workstation. The XP-80 effectively combines a synthe-
sizer sound source and sequencer whose performance
and functions are on a par with the Roland XP-50, along
with extended functions for easier operation and a wide
scope of music production. From live performance to
desk top music applications, the XP-80 delivers all the
power to produce great music.
Connect your XP-80..........................6
Turn the power on .............................7
Play a demo song..............................8
Play sounds.....................................10
Reset to default factory settings.................................10
Select and play Patches.............................................10
Play percussion sounds from the keyboard ...............11
Try out performance functions ...................................12
Play arpeggios (Arpeggiator) .....................................14
Using the XP-80 manuals
❚
To be able to enjoy the full music-making potential of
the XP-80, become completely familiar with its func-
tionality and have trouble-free use, please take some
time to read this Quick Start and the Owner’s Manual.
Try out the demo disk.....................15
Listen to the demo songs...........................................15
Play back a pattern by pressing specific keys (RPS).16
Combine Patterns for playback..................................16
Add rhythmic ‘feel’ to the songs .................................18
Try out some user groove templates..........................18
Playing songs in sequence (Chain Play)....................20
Quick Start
This manual explains how you can quickly and easily
begin enjoying the XP-80. To take complete advantage
of the many advanced functions of the XP-80, first read
the Quick Start manual, then the Owner’s Manual.
Record a song .................................21
Select a Performance.................................................21
Clear internal memory................................................22
Record the drums using realtime recording ...............22
View the recorded data ..............................................25
Record the bass using step recording........................25
Record the melody using realtime recording..............27
Owner’s Manual
Be sure to read Chapter 1 which explains XP-80 basic
concepts and operation. The remaining chapters can be
read for more information as necessary, referring to the
contents or indices.
Create an appropriate Performance
for the song .....................................29
Select a different Patch for the melody ......................29
Assign a new name to the Performance ....................29
Store the Performance...............................................30
Save your new song........................31
Format a disk .............................................................31
Save your song to disk...............................................32
Copyright 1996 ROLAND CORPORATION
All rights reserved. No part of this publication may be
reproduced in any form without the written permission of
ROLAND CORPORATION.
DanceKit...........................................33
Profiles of composers.....................36
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Play display of a sound source mode: Selects a
Patch/Performance/Rhythm Set with the Bank
/Number method. Use BANK [1]–[8] buttons to select
a bank and NUMBER [1]–[8] buttons to select a num-
ber.
Performance edit display: Use TRACK/PART [1]–[16]
buttons to select the Part to be modified.
L
VALUE
Patch edit display: TRACK/PART [1]–[4] buttons
(TONE SWITCH) are used to switch a Tone on/off.
Use TRACK/PART [5]–[8] buttons (TONE SELECT) to
select the Tone to be modified.
H
J
DEC
INC
7
4
STU
8
5
VWX
9
6
YZ!
3
JKL
MNO
PQR
E
F
G
3
3
Rhythm Set edit display: Use TRACK/PART [5]–[8]
buttons (TONE SELECT) to select the note of the key-
board to be modified.
SEQUENCER
BEAT
REC
LOOP
FWD
1
B
ABC
2
DEF
GHI
3
C
0
D
BWD
STOPl/PLAY
SHIFT
SPACE
ENTER
I
A
+l - DIGIT HOLD
Sequencer mode: Use TRACK/PART [1]–[16] buttons
to select a phrase track or Part. During song play-
back/recording, these buttons can be used to switch
between the Play and Mute of a phrase track.
I
[SOUND LIST] / [TEMPO/BEAT]
The function of this button changes depending on the
selected mode.
H.
SOUND LIST: Opens the Sound List window when a
sound source mode display is up.
[l], [r], [u], [d] (Cursor buttons)
Move the cursor (black box) with these.
TEMPO/BEAT: Press this button for selecting a tempo
track or beat track when a Sequencer mode display is
up. If you have temporarily modified the tempo and
wish to play back the song with its initial tempo, press
it while holding down [SHIFT].
[INC], [DEC]
Use these buttons to modify values. If you keep on
holding down one button and pressing the other, the
value change accelerates. If you press one of these but-
tons while holding down [SHIFT], the value will
change in bigger increments.
[a/b/c/d] / [PATTERN]
The function of this button changes depending on the
mode on display.
I. SEQUENCER section
a/b/c/d: Select a subgroup (a/b/c/d) when selecting
a Patch/Performance/Rhythm Set using the
Bank/Number method.
The buttons in this section are used for playback and
recording of the XP-80’s sequencer.
[REC]
PATTERN: Select a Pattern when a Sequencer mode
display is up.
Press this to begin recording.
BEAT indicator
[LOCATE]
This blinks in sync with the tempo and beat of the
song.
This button opens the Locate window to specify and
move the locate position.
[LOOP]
[UNDO/REDO]
Press this to turn Loop Play and Loop Recording
on/off.
Press this button to restore a modified value to its pre-
vious (pre-modified) state, or when cancelling record-
ing or a currently executing operation. Pressing this
button again will restart the recording/operation.
[BWD]
Press this to “rewind” a song. Pressing this button
while holding down [SHIFT] moves you right back to
the beginning of the song. If you hold down this but-
ton as you press [FWD], the song will “rewind” faster.
G.
BANK [1]–[8], NUMBER [1]–[8] / TRACK / PART
[1]–[16]
[STOP/PLAY]
The functions of these buttons change depending on
the display which is showing.
Press this button to start or stop playback of the song.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
[FWD]
Side panel
Use this button to fast-forward the song. Pressing this
button while holding down [SHIFT] moves you to the
end of the song. If you hold down this button as you
press [BWD], the song will fast-forward faster.
❚
J.
[0]–[9] (Numeric keys)
Use these to set a value. They can be used to enter
numeric values as well as alphabetical characters and
notes.
[SHIFT]
This is used in combination with other buttons. Some
buttons on the front panel include grey-printed char-
acters. They indicate the button’s function when
[SHIFT] is held down.
VOLUME
C
1
C2
[ENTER] / [DIGIT HOLD]
The function of this button changes depending on
whether [SHIFT] is being held down or not.
ENTER: Use this button to finalize a value.
DIGIT HOLD: Press this button while holding down
[SHIFT] to turn the Digit Hold function on/off. With
the Digit Hold on, the 100’s place and 10’s place will
be fixed and only the 1’s place will change. This means
that you can select Patches simply by pressing the
numeric key for the 1’s place, without having to press
[ENTER].
VOLUME slider
This slider adjusts the overall output level from the
rear panel OUTPUT and PHONES jacks.
K.
C1 slider, C2 slider
Display
Various parameters or functions can be assigned to
these sliders, so you can control the sound source sec-
tion as you play.
Shows various information for the currently selected
function or operation.
L.
Pitch bend / modulation lever
VALUE dial
This allows you to control pitch bend or apply vibrato.
Depending on the settings, other specified parameters
can also be controlled.
This dial is used to modify values. If you hold down
[SHIFT] as you turn the VALUE dial, the value will
change in greater increments.
Floppy disk drive
3.5” 2DD/2HD floppy disks can be used. Press the
eject switch located at the lower right of the disk drive
to remove a disk.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTPUT MIX R jack, OUTPUT MIX L jack
Rear panel
These jacks output the audio signal to the connected
mixer/amplifier system in stereo. For mono output,
use the L jack.
❚
POWER
PHONES jack
AC
An optional set of headphones can be connected to
this jack. Make sure that your headphones have an
impedance of 8–150 ohms.
Power switch
Press to turn the power on/off.
AC inlet
Connect the AC power cable (included) to this inlet.
✳ With units rated for 117V operation, the AC cable is
already connected to the unit.
CONTROL PEDAL
MIDI
OUT
4
3
2
1
HOLD
THRU
IN
CONTROL PEDAL 1–4 jacks
You can connect optional expression pedals to these
jacks. By assigning a desired function to a pedal, you
can use it to select or modify sound or perform vari-
ous other control. You can also connect optional pedal
switches to sustain sound.
HOLD jack
An optional pedal switch can be connected to this jack
for use as a hold pedal.
MIDI connectors
These connectors can be connected to other MIDI
devices to receive and transmit MIDI messages.
OUTPUT
CLICK OUT
LEVEL OUTPUT
DIRECT
MIX
R
L
R
L
PHONES
CLICK OUT LEVEL knob
Adjusts the level of the click sound to be output to
external devices.
CLICK OUT OUTPUT jack
Connect a cable to this jack when sending clicks to
external devices.
OUTPUT DIRECT R jack, OUTPUT DIRECT L jack
These jacks output only the direct sound (no effects
applied) or EFX’d sound in stereo.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect your XP-80
The XP-80 does not contain an amp or speakers. In order to hear sound, you will need to con-
nect it to a keyboard amp, audio system, or headphones. Refer to the following diagram and
connect the XP-80 to the external equipment you are using.
POWER
CONTROL PEDAL
MIDI
OUT
OUTPUT
4
3
2
1
HOLD
THRU
IN
MIX
R
L
PHONES
AC
Power outlet
External MIDI device
d
lan
Ro
Sterero headphones
d
lan
Ro
Pedal Switch
Expression pedal or pedal switch
Stereo set, etc.
Speaker with built-in amp,
keyboard amp, etc.
<Procedure>
❶
✳
❷
Before you make connections, make sure that power is turned off for all devices.
If the power is on when you make connections, you may damage your speakers.
Connect supplied AC power cable to the XP-80, and plug the other end into an AC power out-
let.
✳
❸
On 117V models the AC cable is permanently attached to the unit.
Connect audio cables and MIDI cables as shown in the diagram. If you are using headphones,
plug them into the PHONES jack. Connect pedal switches or expression pedals as necessary.
✳
✳
In order to take full advantage of the XP-80’s performance, we recommend using a stereo
amp/speaker system, If you are using a mono system, make you connections to the MIX OUT-
PUT jack L.
CONTROL PEDAL 1–4 jacks can also accommodate pedal switches.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn the power on
Once the connections have been completed (p.6), turn on power to your various devices in the
order specified. By turning on devices in the wrong order, you risk causing malfunction and/or
damage to speakers and other devices.
<Procedure>
❶
❷
Before you turn the power on, check to make sure that:
All external devices are correctly connected to the XP-80.
The volume controls of the XP-80 and the amp/mixer system are turned down all the way.
No disk is in the floppy disk drive.
Turn on the power switch located on the rear panel of the XP-80.
POWER
✳
This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up
is required before the unit will operate normally.
❸
❹
Turn the power on of your amp or audio system.
Play the XP-80 and gradually raise the volume controls of the XP-80, your amp or mixer to an
appropriate volume level.
VOLUME
C 1
C2
✳
❶
Be careful not to raise the VOLUME slider of the XP-80 too much. Excessive volume may dam-
age your amp/speaker system or could cause hearing problems.
To turn power off
<Procedure>
Before you turn power off, check to make sure that:
The volume controls of the XP-80 and the amp/mixer system are turned down all the way.
No disk is in the floppy disk drive.
Important data has been saved to a disk (p.32).
Turn off your amp/mixer system.
Turn off the XP-80 power.
❷
❸
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Play a demo song
The XP-80 contains a demo song and you use ‘demo play’ to play it. It’s the easiest introduction
to the XP-80’s exceptional sounds and effects.
✳
If you play a demo song, the current song existing in internal memory will be lost. To keep the
song in the internal memory, save the song to disk (p.32) before executing demo play.
Demo song
Composer
The AXE
Alex Wurman Copyright © 1996 Sonart Productions BMI
✳
✳
Warning: All rights reserved. Unauthorized use of the demo song for concerts, broadcasting, or
any other purposes than personal enjoyment, as well as storage to disk form a violation of
applicable laws.
Refer to page 36 for the profile of the composer.
<Procedure>
❶
❷
Hold down [SEQUENCER] and press [CHAINPLAY].
The confirmation message “DEMO PLAY OK?” will appear.
Press [F5] (OK) to start demo song playback.
If you wish to cancel playback, press [F6] (Cancel). Playback will stop automatically when the
song ends. To interrupt playback, press [STOP/PLAY] again.
❸
You can control the volume level or effects parameters of each Part during playback. To modify
the values, press [PERFORM] and follow the procedure below.
MODE
PATCH
F1
F2
F3
F4
F5
F6
PERFORM
RHYTHM
LOCAL/TX/RX
EXIT
DEC
INC
PART
PANIC
3
2
SEQUENCER
CHAIN PLAY
DEMO
1
1
DISK
SEQUENCER
SYSTEM
UTILITY
REC
BEAT
LOOP
FWD
l
BWD
STOP/PLAY
I
8
Download from Www.Somanuals.com. All Manuals Search And Download.
To modify the volume level of each Part
Press [F6] (Info), then [F4] (Volume) to call up the Part Information display for Volume. Press
[l], [r], [u] or [d] to move the cursor (black box) to the Part whose volume level you want to
modify and set the desired volume level.
To change panning
Press [F6] (Info), then [F5] (Pan) to call up the Part Information display for Pan. Press [l], [r],
[u] or [d] to move the cursor (black box) to the Part whose panning you want to change and
set the desired panning value.
To modify effects settings
Press [F5] (Effects) to call up the General display, then select the Part whose effects settings you
want to modify by pressing TRACK/PART [1]–[16]. Next press [l], [r], [u] or [d] to move
the cursor (black box) to the parameter you want to modify and specify the value.
✳
You can also modify other parameters. For details regarding each parameter, refer to
“Functions of Performance parameters” (p.65) in the Owner's Manual.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Play sounds
Reset to default factory settings
Before using XP-80 for the first time, reset it to its default factory settings using Factory Preset.
Different settings may result in unexpected effects.
✳
Factory Preset operation resets all data in the internal memory and user memory to factory pre-
sets. Save any important data to a disk before executing this operation (p.168) in the XP-80
Owner’s Manual.
<Procedure>
❶
❷
Press [UTILITY].
Press the numeric key [8], then [ENTER].
The Factory Preset display (UTILITY/Factory) will appear.
❸
Press [F6] (Execute).
If “Write Protect ON” message is displayed, press [DEC] to turn the setting OFF. After pressing
[EXIT] to clear the message, press [F6] (Execute) again to reset to the factory preset settings.
MODE
PATCH
F1
F2
F3
F4
F5
F6
PERFORM
RHYTHM
CHAIN PLAY
DISK
LOCAL/TX/RX
EXIT
7
4
STU
8
5
VWX
9
6
YZ!
PQR
GHI
GM
PART
PANIC
2NO
3
SEQUENCER
JKL
DEMO
E
F
G
3
SYSTEM
EFX
UTILITY
1
B
ABC
2
DEF
C
0
D
EFTS
CHS
1
REVERB
SHIFT
SPACE ENTER
A
+l - DIGHOLD
2
Select and play Patches
The XP-80 contains a large number of sounds ready for you to play. The sounds that you select
and play on the XP-80 are generally called ‘Patches.’ Here’s how to select and play Patches.
<Procedure>
❶
Press [PATCH].
The Play display (PATCH) will appear.
Patch group
Patch number
Patch name
10
Download from Www.Somanuals.com. All Manuals Search And Download.
❷
❸
Play the keyboard and listen to the sound.
To select a different Patch, turn the VALUE dial or press [INC]/[DEC].
MODE
PERFORM
PATCH
RHYTHM
CHAIN PLAY
DISK
GM
ART
VALUE
3
1
SEQUENCER
DEMO
DEC
INC
SYSTEM
EFX
UTILITY
EFFECTS
CHORUS
REVERB
Play percussion sounds from the keyboard
The XP-80’s Rhythm Sets contain a wide variety of percussion sounds and special effects.
Here’s how to select a Rhythm Set and play percussion sounds.
<Procedure>
❶
Press [RHYTHM].
The Play display (RHYTHM) will appear.
Rhythm set group Rhythm set number Rhythm set name
Note name
Wave name
❷
Press different keys to play different percussion instruments.
The display will indicate the last-pressed key (note name) and the percussion instrument (wave
name) assigned to that key.
✳
❸
The percussion instrument played by each key will depend on the selected Rhythm Set. For
details, refer to “Factory preset settings” (p.206) in the Owner’s Manual.
To select another Rhythm Set, turn the VALUE dial or press [INC]/[DEC].
MODE
PERFORM
PATCH
RHYTHM
GM
PART
VALUE
3
1
SEQUENCER
CHLAY
DEMO
DEC
INC
SYSTEM
EFX
UTILITY
DISK
EFFECTS
CHORUS
REVERB
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Try out performance functions
The XP-80 provides various controllers that can modify the sound. While playing patches, try
out these controllers and listen to effects they can produce.
✳
The effect that the controllers have will depend on the settings of the selected Patch. If the
effects of the controllers are difficult to detect, select another Patch.
Velocity/Aftertouch
The force with which you play the keyboard (velocity) can affect the volume or timbre of the
sound. Aftertouch (pressure you apply to a key after playing a note) can also affect the sound.
Pitch Bend/Modulation lever
While playing the keyboard, move the lever to the left to lower the pitch, or to the right to raise
the pitch. This is known as ‘Pitch Bend.’ You can also apply vibrato by manipulating the lever
away from you. This is known as ‘Modulation.’
If you move the lever away from you and at the same time move it to the right or left, you can
apply both effects simultaneously.
Modulation
Pitch Bend
C1 slider/C2 slider
While playing the keyboard, you can move the sliders up or down to modify the volume level
or timbre.
C1
C2
✳
How sound varies depends on the current setting. For details, refer to “XP-80 operating envi-
ronment setup (System parameters and their functions)” (p.88) in the Owner’s Manual.
Hold pedal
If an optional pedal switch is connected to the rear panel HOLD jack, pressing the pedal switch
will sustain (hold) the sound even if the keys are released.
Expression pedal
If an optional expression pedal is connected to any of the rear panel CONTROL PEDAL jacks
1–4, you can use the pedal to control the volume or timbre of sound.
✳
How sound will vary depends on the current setting. For details, refer to “XP-80 operating
environment setup (System parameters and their functions)” (p.88) in the Owner’s Manual.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Solo
You can play using single notes, by pressing [SOLO] (indicator lights). This function is especial-
ly effective when playing a sax, flute or other monophonic instrument.
Using [PORTAMENTO] with [SOLO] ON allows you to simulate performance techniques like
violin glissandos.
KEY EFFECTS
RPS
ARPEGGIO
SOLO
PORTAMENTO
TRANSPOSE
- OCT
+ T
✳
For details, refer to “Playing single notes (Solo)” (p.28) in the Owner’s Manual.
Portamento
As you play the keyboard, you can make pitch slide smoothly from one key to another, by
pressing [PORTAMENTO] (indicator lights).
KEY EFFECTS
RPS
ARPEGGIO
SOLO
PORTAMENTO
TRAOSE
- OCT
+ OCT
✳
For details, refer to “Creating smooth pitch changes (Portamento)” (p.28) in the Owner’s
Manual.
Sound Palette
While playing the keyboard, you can move the sliders up or down to modify volume level or
sound character.
To change sound character, press [FILTER/ENV] to light the indicator and move the sliders.
To change the volume level, press [LEVEL] to light the indicator and move the sliders.
SOUND PALETTE
FILTERl/ENV
LEVEL
FILTERl/ENV CUTOFF RESO. ATTACK DECAY
LEVEL
1
2
3
4
✳
For details, refer to “Quick sound character changes (Sound Palette)” (p.28) and (p.32) in the
Owner’s Manual.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Play arpeggios (Arpeggiator)
You can play a broken chord (arpeggio) automatically, by simply pressing a chord. For exam-
ple, if you press a C major chord, the XP-80 plays an arpeggio such as C → E → G → C → E →
G...
<Procedure>
❶
❷
Press [PATCH].
Press [ARPEGGIO] to turn the indicator on.
KEY EFFECTS
RPS
ARPEGGIO
PORTAMENTO
TRANSPOSE
- OCT
+ OCT
❸
❹
Play a chord.
XP-80 will play an arpeggio, according to the notes forming the chord you have just voiced.
Press [u] or [d] to move the cursor to the “Arpeggio Style” and enter various values by turn-
ing the VALUE dial.
Depending on the value you enter, the way arpeggios play will vary.
✳
❺
For details regarding playing arpeggios, refer to “Playing an arpeggio” (p.35) in the Owner’s
Manual.
To finish playing arpeggios, press [ARPEGGIO] again so the indicator turns off.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Try out the demo disk
Listen to the demo songs
The disk supplied with XP-80 contains 8 demo songs. Listen to the demo songs to get a better
idea of just what the XP-80 can do.
No. File Name Song Name
DEMO_000.SVQ The AXE
Composer
01
02
03
04
05
Alex Wurman
Copyright © 1996
Sonart Productions BMI
DEMO_001.SVQ New Age Express Jean-Philippe Rykiel Copyright © 1996
Tactic Music
DEMO_002.SVQ Sound Pile /#4
DEMO_003.SVQ Ten Years
DEMO_004.SVQ Saga
Scott Wilkie
Copyright © 1995 Scott Wilkie
for BeachHouse Music
Marvin Sanders Copyright © 1995
Marvster Music
Masashi Hirashita, Kazuko Hirashita
Copyright © 1996 Roland Co.
Copyright © 1996 Roland Co.
Naoki Matsuura Copyright © 1996 Roland Co.
06
07
08
DEMO_005.SVQ Body Noise
DEMO_006.SVQ RPS City
Pendulumn
DEMO_007.SVQ HyperGroove4XP Mitsuru Sakaue Copyright © 1996 Idecs Inc.
✳
Warning: All rights reserved. Unauthorized use of these songs for any other purposes than per-
sonal enjoyment is a violation of applicable laws.
✳
✳
Refer to page 36 for composer profiles.
The demo song DEMO_007.SVQ (HyperGroove4XP) has been created using the optional wave
expansion board “SR-JV80-09 SESSION.” To play back this demo song correctly, install this
wave expansion board in any of EXP-A–D slots. This song is created using the data libraries
“Hyper Groove” from Idecs Inc.
<Procedure>
❶
❷
Insert the demo disk into the disk drive.
Press [SEQUENCER].
The Play (SEQ(Song)) display will appear.
Song number
File name
Song name
Volume label
❸
Make sure that the cursor (black box) is located at the song number.
If the cursor is elsewhere, move it by pressing [u] or [d].
❹
❺
Select the demo song that you wish to hear, either by turning the VALUE dial, or using the
[INC] or [DEC] to select the song number 01–08.
Press [STOP/PLAY] to start demo song playback.
To interrupt playback, press [STOP/PLAY] again. Listening to the demo song, you can modify
the volume level and/or effects of each Part. To modify values, follow the same procedure as
you use for
“Playing a demo song” (p.8).
✳
✳
If you interrupt song playback, a “+” symbol may appear at the side of the displayed measure
number (M=). This indicates that the song is stopped in the middle of a measure.
If you play the keyboard after a song has been played back and experience problems such as no
sound or incorrect pitch, hold down [SHIFT] and press [EXIT] for several seconds (the Panic
function).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Play back a pattern by pressing specific keys (RPS)
The RPS (Realtime Phrase Sequencing) function allows you to assign a Pattern to a key on the
keyboard and play it back simply by pressing the assigned key. Since different phrases can be
played back by pressing different keys, this function is especially effective for live performance.
The demo disk contains a demo song “09:RPS_DEMO.SVQ (Try RPS)” that allows you to try
out the RPS function. Here’s how.
No. File name
Song name Composer
Tatsuya Senoh Copyright © 1995 Roland Corporation
09 RPS_DEMO.SVQ Try RPS
✳
✳
Warning: All rights reserved. Unauthorized use of this song for any other purposes than per-
sonal enjoyment is a violation of applicable laws.
Refer to page 36 for the profile of the composer.
<Procedure>
❶
❷
❸
Insert the demo disk into the disk drive.
Press [SEQUENCER].
Make sure that the cursor is located at the song number.
If the cursor is elsewhere, move it using [u] or [d].
❹
❺
❻
Press the numeric key [9] to select “09:RPS_DEMO.SVQ (Try RPS).”
Press [STOP/PLAY] to begin playback.
As you listen to the song, press keys on the keyboard referring to the diagram below.
Pressing a key will play back the pattern once.
C2
F2
Stop
✳
❼
If you press F2, the pattern will repeatedly play back. To interrupt playback of the pattern,
press F2 again or press a key lower than C2. To interrupt playback of other patterns, press a key
lower than C2.
To stop playback, press [STOP/PLAY] again.
Combine Patterns for playback
The included demo disk also contains various Pattern collections which you can use in various
playing situations. These Pattern collections are contained in the songs numbers from 10 to 20.
You may use these Pattern collections to create your own songs. The demo song
DEMO_006.SVQ (RPS City) has been created using the Pattern set PTNSET11.SVQ (Trance Set).
These Pattern collections will not play back even when you press [STOP/PLAY]. By pressing
specific keys, however, you can play back drum, bass or other instrument phrases. Here’s how
you can play a song combining these Patterns.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
No. File name
Song Name
10
11
12
13
14
15
16
17
18
19
20
PTNSET01.SVQ Acid Set
PTNSET02.SVQ Acid Swing Set
PTNSET03.SVQ Dancehall Set
PTNSET04.SVQ Euro Beat Set
PTNSET05.SVQ Funk Set
PTNSET06.SVQ Ground Beat Set
PTNSET07.SVQ Hip Hop Set
PTNSET08.SVQ House Set
PTNSET09.SVQ Jazz Set
PTNSET10.SVQ Lovers Set
PTNSET11.SVQ Trance Set
The produsers of all songs are Mitsuru Sakaue and Kiyotaka Takiyama. Copyright © 1995
Roland Corporation
✳
✳
Roland Corporation holds the copyrights to all the Phrases of these Patterns. You may use these
Phrases when creating new works of your own without requesting permission from Roland.
Roland Corporation, however, assumes no responsibility or liability whatsoever with regard to
any infringements upon the copyrights of any third parties that may result through your use of
these materials.
Refer to page 36 for the profile of the Producer.
<Procedure>
❶
❷
❸
Insert the demo disk into the disk drive.
Press [SEQUENCER].
Make sure that the cursor is located at the song number, and select the demo song that you
wish to hear, either by turning the VALUE dial, or by pressing [INC]/[DEC] to select the song
number from 10–20.
If the cursor is elsewhere, move it using [u] or [d].
❹
❺
Press [STOP/PLAY].
No sound will play, but the sounds to be used for Pattern playback will be selected. By putting
the XP-80 in playback mode, you can synchronize the timing at which each Pattern will begin
playback.
Press various keys to play back the Patterns, referring to the figure below.
As long as you keep the key pressed, the pattern continues to play back. You can play back up
to eight Patterns simultaneously.
Bass
Fil in
Others
C2
Stop
Drum
Bass
✳
The keys assigned to each pattern will vary slightly depending on the pattern collection select-
ed.
✳
❻
To interrupt playback of the pattern, press a key lower than C2.
To stop playback, press [STOP/PLAY] again.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Add rhythmic ‘feel’ to the songs
The Groove Quantize function allows you to add a rhythmic ‘feel’ to your song by putting in
accents and changing timing for a more human or natural feel. You can easily vary the playing
‘feel’ by selecting different templates of different musical styles. Here’s how you can use
Groove Quantize with the “21:QTZ_GRV!.SVQ(Try Groove)” contained in the demo disk.
No. File name
Song name
21 QTZ_GRV!.SVQ Try Groove
<Procedure>
❶
❷
❸
Insert the demo disk into the disk drive.
Press [SEQUENCER].
Make sure that the cursor is located at the song number, and press the numeric key [2] and [1]
to select “21:QTZ_GRV!.SVQ(Try Groove).”
If the cursor is elsewhere, move it using [u] or [d], then select the song.
Press [STOP/PLAY] to play back the song.
❹
❺
Check the song’s rhythm before performing Groove Quantize.
Press [F2] (Quantiz).
The message “This Song is not Internal Song. Load anyway?” will be displayed.
❻
❼
Press [F5] (OK) to load the song into internal memory.
Press [F3] (Groove).
The Groove Quantize display (SEQ/Quantize) will appear.
❽
❾
Press [STOP/PLAY] to audition the song (Preview).
Make sure that the cursor is positioned at the “Template Number,” and turn the VALUE dial to
select a template from PRE:001–PRE:071.
If the cursor is elsewhere, move it using [u], then select the template.
As you switch templates, you’ll notice the rhythmic ‘feel’ also changes.
✳
❿
If you select a number from USER:001–USER:016 before loading a user groove template,
Groove Quantize will not work.
To end preview, press [STOP/PLAY] again.
Try out some user groove templates
In addition to the templates stored in the XP-80’s memory (PRE:001–PRE:071), you can also
select user groove templates for Groove quantization. User groove templates are those you can
manipulate for a Groove Quantize based on the feel of any songs you like.
The demo disk contains a user groove template file (U_TEMPLA.SVT) that holds 16 different
user groove templates. This lets you access various user groove templates covering different
musical categories. Load “21:QTZ_GRV!.SVQ (Try Groove)” into the XP-80’s memory and try it
out.
<Procedure>
❶
❷
❸
Insert the demo disk into the disk drive.
Press [SEQUENCER].
Make sure that the cursor is positioned at the song number, and press the numeric key [2] and
[1] to select “QTZ_GRV!.SVQ(Try Groove).”
If the cursor is elsewhere, move it using [u] or [d], then select a song.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
❹
❺
Press [ENTER] to finalize the song selection.
The box surrounding the song number and file name will disappear, and the cursor will be
positioned at the song number.
Press [F2] (Quantiz).
The message “This Song is not Internal Song. Load anyway?” will be displayed.
❻
❼
❽
Press [F5] (OK) to load the song into the internal memory.
Press [F3] (Groove).
Press [F4] (Load).
The LoadTemplate display (SEQ/Quantize/Load) will appear.
❾
❿
Make sure that the cursor is positioned at the “File Type,” and make sure that “GROOVE” is
selected.
Press [d] to move the cursor to the “File Name,” and make sure that “U_TEMPLA.SVT” is
selected.
Press [F6] (Execute) to load the user groove template file.
When the user groove template file has been loaded, the Groove Quantize display
(SEQ/Quantize) appears.
Press [STOP/PLAY] to preview the song.
Make sure that the cursor is positioned at the “Template Number,” and turn the VALUE dial to
select a template you like from USR:001–016.
By switching from one template to another, you’ll notice the rhythmic ‘feel’ of the song also
changes.
If the cursor is elsewhere, move it by pressing [u], then select the template.
Template
Explanation
USR:001 (16 Norm. Dance H.Acc)
USR:002 (16 Norm. Fusion H.Acc)
Dance (large dynamics)
Fusion (large dynamics)
USR:003 (16 Norm. Reggae H.Acc ) Reggae (large dynamics)
USR:004 (16 Heavy Dance H.Swg)
USR:005 (16 Heavy Fusion H.Swg)
USR:006 (8 Norm. Pops H.Acc)
USR:007 (8 Norm. Rhumba H.Acc)
USR:008 (8 Heavy Pops H.Swg)
USR:009 (Human Swing Feel)
USR:010 (Break Beats Feel)
Dance (dragging beats, heavy swing)
Fusion (dragging beats, heavy swing)
Pops (large dynamics)
Rhumba (large dynamics)
Pops (dragging beats, heavy swing)
Swinging groovy rhythm
Rhythm with the 4th beat delayed like breakbeats
USR:011 (Slowing Down/Draggin)
Rhythm with the first beat gradually becoming longer
within a measure.
USR:012 (16 Beat Swing)
USR:013 (Axe Music Feel)
USR:014 (Flat Swing Feel)
USR:015 (5 Against 2)
16-beat swing
Axe rhythm
Swing rhythm with no grooves and dynamics
Quintuplets over two beats
Dragging Ethnic feel in 6/8
USR:016 (Lagging 6/8 Feel)
To end the preview, press [STOP/PLAY] again.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing songs in sequence (Chain Play)
Chain Play successively plays back songs on disk in the order you specify. The demo disk con-
tains “XP-80.SVC” which is preset to play back song numbers 01–08 successively. Here’s how
to perform chain play.
<Procedure>
❶
❷
Insert the demo disk into the disk drive.
Press [CHAIN PLAY].
Chain file number
Chain file name
❸
Make sure that the cursor is positioned at the chain file number.
If the cursor is elsewhere, move it by pressing [u].
❹
❺
Turn the VALUE dial clockwise to select “XP-80.SVC.”
Press [STOP/PLAY] to start playback.
After a slight pause, chain play will start.
❻
To end the chain play, press [STOP/PLAY] again.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Record a song
Here’s how to use the XP-80 to record a simple song. On the XP-80, the musical performance
data for one song or composition is called a ‘song.’ As you record the following sample song,
you’ll become familiar with basic recording procedures.
<Melody>
<Bass>
<Drums>
Closed hi-hat
Snare drum
Hi-hat
Low tom
Bass drum
Multitrack recording allows you to record musical performances consisting of two or more
instruments. The XP-80 performs multitrack recording by recording new Parts while you moni-
tor the playback of Parts previously recorded on Phrase tracks. Generally, multitrack record-
ings are made in order of “drums → bass → accompaniment → melody.” This order makes it
easier to keep each Part rhythmically correct, since you can record the accompaniment or
melody while listening to drums and bass.
Select a Performance
If you wish to use two or more Patches to play, select Performance mode. There are two types
of Performances; single and layer. If you wish to record ensemble playing, select a single
Performance. A single Performance allows only the specified Part to sound during recording,
and to play back the song with multiple instruments.
In recording a sample song, use the Performance “PR-A:12 Pop Set 1.”
<Procedure>
❶
Press [PERFORM].
The Play display (PERFORM) will appear.
Performance group
Performance number Performance name
❷
Turn the VALUE dial, or press [INC]/[DEC] to select Performance “PR-A:12 Pop Set 1.”
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Clear internal memory
A song to be recorded must first be loaded into internal memory. You will need to clear the
memory before recording a new song.
<Procedure>
❶
❷
Press [UTILITY].
Press [6], then [ENTER].
The Song Initialize display (UTILITY/SngInit) appears.
❸
Press [F6] (Execute) to clear internal memory.
Record the drums using realtime recording
Realtime recording allows you to record your performance as you play. It’s pretty difficult to
record multiple percussion instruments in realtime recording. We’ll use the Loop function to
record a bass drum, snare drum, hi-hat, etc., over a specified area repeatedly until your drum
set is complete. For the this drum set, we’ll use the “PR-A:001 PopDrumSet 1” sounds assigned
to Part 10 of a Performance.
<Procedure>
❶
❷
Press [SEQUENCER].
Make sure that “00:InternalSong” is selected.
If another song is selected, move the cursor to the song number and select the song by turning
the VALUE dial or pressing [DEC], then pressing [ENTER].
❸
Press [REC].
The Realtime Rec Stand-by display (SEQ) appears.
✳
❹
To cancel recording, press [EXIT] or [REC].
Press [d] to move the cursor to “ ,” and set the tempo to 70. You can obtain this tempo by
turning the VALUE dial counterclockwise or pressing [DEC].
Press [r] to move the cursor to “Loop,” and select 4, by turning the VALUE dial clockwise or
pressing [INC].
❺
This allows you to record four measures repeatedly.
❻
Press [d] to move the cursor to “Mode,” and make sure that MIX is selected.
This allows you to record the measures with multiple percussion instruments played separate-
ly.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
❼
Select Phrase track for the recording destination. Press TRACK/PART [10] and the indicator
will blink.
When you select Phrase track 10, the drum sound of the correspondingly numbered Part 10 will
automatically be selected for recording.
BANK
TRACK/PART
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
TONE SWITCH
TONE SELECT
NUMBER
TRACK/PART
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
This completes preparations for recording. Now let’s record the following musical passage
using percussion instruments.
High tom
Closed hi-hat
Low tom
Snare drum
Bass drum
❽
❾
Press [STOP/PLAY].
After listening to one measure of the metronome count, press the C2 key to record the bass
drum (Hybrid Kick1).
❿
When you finish recording the 4th measure, the song will return to measure 1, and the bass
drum passage you have just recorded will play back. While listening to the playback, record the
snare drum (Natural SN2) by pressing the D2 key.
In the same way, record the remaining percussion instruments using A2 (Verb Tom Hi), G2
(Verb Tom Lo) and F#2 (C1 HiHat 1) keys.
F#2
C2 D2
G2 A2
When you finish recording all notes of the percussion instruments, press [STOP/PLAY] to end
the session.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
........................................................................................................................................................................................................
<Rehearsal>
In recording mode, the Rehearsal function allows you to confirm which percussion instrument
is assigned to each key or practice the passage, without actually recording the notes.
<Procedure>
❶
Press [F6] (Rehrsal) while in recording mode.
A “❚” symbol will be displayed next to “Rehrsal.”
❷
To return to normal recording mode, press [F6] (Rehrsal) again.
........................................................................................................................................................................................................
........................................................................................................................................................................................................
<Realtime Erase>
If the notes were not recorded as you expected, use the Realtime Erase function to erase the
wrong notes.
<Procedure>
❶
Press [F5] (Erase) while in recording mode.
Now you will be ready to use the Realtime Erase function.
❷
❸
Press the key corresponding to the percussion sound you wish to erase, and the notes will erase
as long as you continue pressing the key.
If you wish to erase all percussion instrument notes, press [F6] (ErsALL). All the notes will be
erased during the time that you hold down the button.
When you finish erasing, press [EXIT] to close the Realtime Erase window.
........................................................................................................................................................................................................
24
Download from Www.Somanuals.com. All Manuals Search And Download.
View the recorded data
The notes you record on the sequencer are recorded as MIDI messages. Let’s use the
Microscope display (SEQ/Micro) to check the drum performance data you recorded just now.
<Procedure>
❶
❷
While holding down [SHIFT], press [BWD] to move right to the beginning of the first measure
of the song.
Press [F4] (Micro).
The Microscope display (SEQ/Micro) will appear.
Song position (Measure-Beat-Clock)
Performance data
❸
✳
Press [ ] to view the recorded performance data.
Pressing [ ] will move the “>” symbol to the next data. Pressing [ ] will move the “>” sym-
bol to the previous data.
A “*” symbol displayed at the left of performance data indicates that other data has also been
recorded at the same Song position.
Record the bass using step recording
The Step Recording function allows you to input notes and rests one by one. It is suitable for
recording a bass line that should be rhythmically correct, or other Parts you may have difficul-
ties playing by hand. Use “PR-B:013 Finger Bass” assigned to Part 2 of a Performance.
✳
Mix-recording data on one Phrase track is not possible when step recording. If you want to mix
(combine) sequencer data into a single Phrase track, you need to conduct separate step record-
ing sessions and merge the takes using the Track Edit function (Owner's Manual p. 130).
<Procedure>
❶
❷
Press [PERFORM].
Press [ ] or [ ] until “Part 2(PR-B:013 Finger Bass)” is on the display so that you can play a
bass line on the keyboard.
The part played by the keyboard
❸
❹
❺
Press [SEQUENCER], then [F4] (Micro) to call up the Microscope display (SEQ/Micro).
Hold down [SHIFT] and press [BWD] to return to measure 1.
Select Phrase track 2 as the recording destination by pressing TRACK/PART [2].
25
Download from Www.Somanuals.com. All Manuals Search And Download.
❻
Press [REC].
The Step Recording display (SEQ/Micro) will appear.
This completes preparations for recording. Now let’s record the notes by following the staff
notation.
❼
❽
Select the step time (note length) for the first note. The first note to be input is a quarter note.
Move the cursor to “Step Time,” and make sure that “ ” is displayed.
Press the G2 key for the first note.
G2
Releasing the key finalizes the value so that you can enter the next note.
✳
To correct a wrong note entry, press [F2] (StpBack) or [BWD] to erase the most recently-entered
note, and input it again.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
❾
Next, you’ll input an eighth-note rest. Select an eighth note as the step time, by turning the
VALUE dial counterclockwise or pressing [DEC], then press [F6] (REST).
❿
Next you’ll enter two sixteenth notes. Select a sixteenth note as the step time, by turning the
VALUE dial counterclockwise or pressing [DEC], then press the G2 key twice.
Now you’ll enter a half-note rest. Select a half note as the step time, by turning the VALUE dial
clockwise or pressing [INC], then press [F6] (REST).
This completes the first measure. Record the second and following measures in the same way.
When you finish recording, press [STOP/PLAY].
Press [EXIT] to return to the Play display (SEQ(Song)).
Record the melody using realtime recording
Here’s how to realtime record a melody using the “PR-A:001 64voice Piano” which is assigned
to Part 1 of a Performance.
<Procedure>
❶
❷
Press [REC] to call up the Realtime Rec Stand-by display (SEQ).
Return the song to the measure 1. To do this, press [u] or [d] to move the cursor to “M,” then
turn the VALUE dial counterclockwise or press [DEC] to set 1.
Press [LOOP] to turn the indicator off.
❸
This turns off the Loop function. As repeated recording is not needed for recording a melody,
you should turn this off.
❹
Press [d] to move the cursor to “Mode,” then set the recording mode to REPLACE, by turning
the VALUE dial counterclockwise or pressing [DEC].
Select REPLACE because you won’t be mix recording.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
❺
Select Phrase track 1 as the recording destination of the melody, by pressing TRACK/PART [1].
The indicator will blink. By selecting the Phrase track 1, “64voice Piano” assigned to the corre-
spondingly numbered Part 1 will be ready for recording.
BANK
TRACK/PART
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
TONE SWITCH
TONE SELECT
NUMBER
TRACK/PART
2
10
3
11
4
12
5
13
6
14
7
15
8
16
At this time, TRACK 2 and 10 button indicators are on. This indicates that Phrase tracks 2 and
10 contain recorded material.
❻
❼
Press [STOP/PLAY] to begin recording.
After one-measure metronome count, play the melody as you monitor the percussion and bass
parts you laid down earlier.
When you finish recording, press [STOP/PLAY].
This completes recording of the sample song. Hold down [SHIFT] and press [BWD] to return to
measure 1, then press [STOP/PLAY] to listen to the song.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Create an appropriate Performance for the song
The sample song you’ve just recorded uses a preset Performance. However, that Performance’s
settings may not be ideal for your song. This section will explain how you can modify the
Performance to better suit your song. Different aspects of a Performance can be modified, but
as an example, let’s change the Patch “PR-A:001 64voice Piano” that is selected for the melody.
Then we’ll modify the name of the Performance and save the new settings.
Select a different Patch for the melody
<Procedure>
❶
❷
Press [PERFORM] to call up the Play display (PERFORM).
Press [F3] (Part).
The Part Param display (PERFORM/Part) will appear.
❸
❹
❺
Press TRACK/PART [1] to select Part 1.
Press [u] or [d] to move the cursor to “Patch Group” or “Patch Number.”
Select a Patch you like by turning the VALUE dial or pressing [INC]/[DEC].
Play the keyboard to listen to the sounds while you select a Patch.
❻
When you finish making settings, press [EXIT] to return to the Play display (PERFORM).
An asterisk “*” appears at the left of the Performance group on the display. This indicates that
the Performance settings have been modified.
Assign a new name to the Performance
The currently selected performance is named “Pop Set 1.” Let’s assign a new name to the newly
created Performance.
<Procedure>
❶
Press [F1] (Common).
The Common display (PERFORM/Common) will appear.
❷
❸
❹
❺
❻
Press [u] to move the cursor to “Performance name.”
Press [l] or [r] to move the cursor to the location where you want to enter a character.
Turn the VALUE dial, or press [INC]/[DEC] to select the desired character.
Repeat steps 3 and 4 to finish assigning the new Performance name.
Press [EXIT] to return to the Play display (PERFORM).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Store the Performance
The Performance settings that you modify are temporary. They will be lost if you turn the
power off or select another Performance. If you wish to retain the modified settings, you must
store them in user memory.
<Procedure>
❶
❷
Press [UTILITY].
Press the numeric key [1], then [ENTER].
The Perform Write display (UTILITY/Write) will appear.
❸
❹
Turn the VALUE dial or press [INC]/[DEC] to select a Performance of the writing destination.
In this example, select any Performance you wish to overwrite.
Press [F6] (Execute) to save the Performance settings into the selected memory destination.
If a message “Write Protect ON” is displayed, press [DEC] to turn the setting “OFF.”
Then, press [EXIT] to clear the message, and [F6] (Execute) again.
< The temporary area >
When you modify a Performance or Patch, you are not actually modifying the Performance or
Patch that is stored in memory.
You are modifying the Performance or Patch data which has been copied into a temporary
work area, referred to as the "temporary area." The reason for this is that if you were to directly
modify the original Performance or Patch that is stored in memory, it would not be possible to
return it to the original settings.
One way of thinking about this is to imagine that you have copied a Performance or Patch that
is stored in your desk drawer, and are modifying it on your desktop (the temporary area). If
you leave the Performance or Patch on your desktop, it will be thrown away. If you wish to
keep the Performance or Patch that you have been working, you need to store (save) it back in
the desk drawer.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Save your new song
The song you’ve just recorded will be lost if you turn the power off. If you wish to keep the
song, you must save it to disk.
Format a disk
New disks or disks that have been formatted for use on another device must be formatted by
the XP-80 before songs can be saved to them.
<Procedure>
❶
❷
Check the disk.
The XP-80 uses 2DD or 2HD 3.5 inch floppy disks. When you format a disk, all data existing on
that disk will be lost. If you will be using a disk that has been used with another device, make
sure that it does not contain data you wish to keep.
Set the protect tab of the disk to the Write position.
Protect tab
Write (writing permitted)
Protect (writing prohibited)
❸
❹
❺
Insert the disk into the disk drive.
Press [DISK].
Press the numeric key [3], then [ENTER].
The Format display (DISK/Format) will appear.
❻
❼
Press [F6] (Execute).
At this time, the message “Format OK?” appears to prompt your confirmation.
Press [F5] (OK) to execute formatting.
When formatting is completed, the display will indicate “COMPLETE.”
✳
❽
If you wish to cancel formatting, press [F6] (Cancel).
Press [EXIT] to return to the Disk Menu display (DISK/Menu).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Save your song to disk
You can save your song to the disk you just formatted.
<Procedure>
❶
❷
Make sure that the Disk Menu display (DISK/Menu) is up.
If another display is showing, press [DISK] to call up the Disk Menu display.
Press the numeric key [2], then [ENTER].
The Save display (DISK/Save) will appear.
❸
❹
Make sure that SONG is selected for “File Type.”
Press [r] to move the cursor to “Save Mode,” and make sure that “SONG + SOUND” is select-
ed.
This allows you to save the Performance settings to disk along with the song.
❺
❻
Press [d] to move the cursor to “File Name.”
Press [l] or [r] to move the cursor to the location where you wish to enter a character.
Modify the temporary file name “SONG_000” and assign a new file name as you like.
❼
❽
❾
Turn the VALUE dial, or press [INC]/[DEC] to select the desired character.
Repeat steps 6 and 7 to finish assigning the new file name.
Press [F6] (Execute) to save the file to the disk.
When saving is completed, the display indicates “COMPLETE.”
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DanceKit
The “Dance Kit” disk contains carefully selected sounds and music data geared toward the cur-
rent dance music scene. By using this disk, you will be able to hear for yourself how the XP-80
can be used to its full potential. Maybe it will provide some hints which can be used for your
own music!
In the “Dance Kit” you will find the following data and materials:
Demo songs: 6
Demo songs (for RPS): 14
Data files: 1 (DANCEKIT.SVD)
✳
“DANCEKIT.SVD” contains 128 patches, 32 performances, and 2 rhythm sets.
Caution
Before listening to the demo data on the disk, you have to overwrite your User memory and
System memory. If you have created any important data in the XP-80, be sure to back up your
data onto another disk first.
To store your data onto a disk, press the [DISK], press the numeric key [2], the [ENTER] to call
up the Save display (DISK/Save). On that screen, select “SOUND” for File Type parameter, and
then name your file and press the [F6] (Execute) to save the data.
After playing the demos, you will want to load your important data back into the XP-80. To do
so, Press the [DISK], Press the numeric key [1], then [ENTER] to call up the Load display
(DISK/Load). From that screen, select “SOUND” for File Type parameter, and then select your
file and press the [F6] (Execute) to load the data.
✳
For details, refer to p.167 in the XP-80 Owner’s Manual.
Loading Data Needed for the Demos
❶
❷
Insert the “Dance Kit” disk into the disk drive.
Press the [DISK], press the numeric key [1], then [ENTER] to call up the Load display
(DISK/Load). From that screen, select “SOUND” for File Type parameter, and then select the
“DANCEKIT. SVD” and press [F6] (Execute) to load the data.
✳
Keep the disk inserted while listening to the demos.
Playing Back Demo Songs
❶
❷
Press the [SEQUENCER].
Choose a demo song you want to play back and press the [STOP/PLAY].
Playing Back Patterns Using RPS
❶
❷
Press the [SEQUENCER] and choose the RPS demo data you want to play back.
Press the [STOP/PLAY]. Although this won’t cause songs to play, it sets patches in the
Performance and sets the playback tempo of the patterns.
❸
❹
Try pressing the keys and play various patterns. To stop play of the patterns, press the white
key at the far left side (C2).
When finished, press the [STOP/PLAY].
Playing Various Patches
❶
After pressing the [PATCH], select the Patch you wish from the User Group (USER 1-128). To
enable selection from the USER group, press the [PATCH] and press [0] while holding down
the [SHIFT].
Also, try the C1/C2 slider to modify patches. You will see a “*” next to the names of patches
with sounds that you can vary using the sliders.
DanceKit
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Demo Songs
File Name
Song Name
Composer/Arranger
DKIT_01.SVQ
DKIT_02.SVQ
DKIT_03.SVQ
NEXTGENERATION
Echoes of Jungle
Trip Hop Bop
Music by Masayuki Kurihara *1
Arranged by Shun Takai (Ten Factory) *1
Arranged by Naoki Matsuura,
Noriyuki Nakahashi (Ten Factory) *1
Music by Ryeland Allison *2
Arranged by Naoki Matsuura (Ten Factory) *1
Music by Shigeyoshi Kawagoe *1
DKIT_04.SVQ
DKIT_05.SVQ
DKIT_06.SVQ
Resonance
Jungle Juice
Hemenway
*1 : Copyright © 1995 Roland Corporation *2 : Copyright © 1995 Ryeland Allison
All rights reserved. Unauthorized use of these materials is a violation of applicable laws.
✳
Masayuki Kurihara
Masayuki is a techno-artist who currently resides in Tokyo. His activities include providing musical selec-
tions, creating sound tracks and special effects, and the production of music for T.V. commercials. In
another vein, his work has been released on 12-inch records and CDs by Gaia Records of Germany, and
Psy-harmonics of Australia (among others). He has performed at a variety of clubs and outdoor parties in
Tokyo, Berlin, Hamburg and Paris. In May of 1995, he established the T.T.T. Records company, in partner-
ship with DJ Kuni and others. He is currently looking forward to being able to release a variety of new
musical material to the world.
Ryeland Allison
Ryeland makes electronics groove at the speed of sound including computer controlled transistor rhythm.
He is honored to introduce this to you.
Shigeyoshi Kawagoe
Shigeyoshi entered the Berklee College of Music in 1985, and majored in jazz composition and arrange-
ment. He studied under Bret Willmotte (guitar) and Hal Crook (composition, arrangement, and improvi-
sation). While in school, he got together with Jeff Ramsey, Chris Parks, Dave Delhomme, and Zack Alford
to form the group: “One Mind, One Soul.”They performed mainly in the Boston area, and on numerous
occasions they were the opening act along with Roy Ayers and Stacy Lauisaw. Moving to New York after
graduation in December of ‘88, he continued his work as a performer along the East coast. He returned to
Japan in March of ‘93. Since then, he has been kept busy as a guitarist, composer, arranger and MIDI pro-
grammer.
Ten Factory
Syun Takai, Naoki Matsuura, Noriyuki Nakahashi. Ten Factory consists of Roland Japan Staff.
Demo Songs for RPS
File Name
Song Name
RPS Keys
DUB.SVQ
DUB_L.SVQ
FUNK2.SVQ
FUNK2_L.SVQ
HIPH2.SVQ
HIPH2_L.SVQ
JNGL_T.SVQ
JNGL_T_L.SVQ
JUNGLE.SVQ
JUNGLE_L.SVQ
TECHNO.SVQ
TECHNO_L.SVQ
TRIP_H.SVQ
TRIP_H_L.SVQ
Dub RPS
Dub RPS_L
Funk2 RPS
E2–C4
D2–D#4
E2–C#4
D2–Bb3
E2–G#4
D2–C4
E2–C4
D2–C#4
F2–C#4
D2–C4
E2–F4
Funk2 RPS_L
HipHop2 RPS
HipHop2 RPS_L
Jungle_Tc RPS
Jungle_Tc RPS_L
Jungle RPS
Jungle RPS_L
Techno RPS
Techno RPS_L
Trip Hop RPS
Trip Hop RPS_L
E2–F4
E2–D4
D2–C4
Copyright © 1995 Roland Corporation
✳
✳
Songs that have an “_L” at the end of their names are designed so they are easy to play during a live per-
formance—the instrument parts have been arranged so they sound as a group when a single key is
pressed.
Roland Corporation holds the copyrights to all the Phrases of these Patterns. You may use these Phrases
when creating new works of your own without requesting permission from Roland. Roland Corporation,
however, assumes no responsibility or liability whatsoever with regard to any infringements upon the
copyrights of any third parties that may result through your use of these materials.
DanceKit
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Performance (user)
Patch (user)
Rhythm set (user)
No. Name
Key Mode
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
LAYER
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
No. Name
V
4
2
4
1
1
2
4
3
3
3
1
2
1
4
4
2
2
2
4
2
2
2
2
3
2
2
2
3
2
3
3
3
2
1
4
4
2
4
1
3
1
4
2
2
4
1
4
3
3
2
2
2
2
2
2
2
2
2
4
3
2
3
3
4
No. Name
V
4
4
4
4
4
4
2
2
3
3
4
3
4
4
4
3
4
4
3
4
2
3
2
4
1
2
2
3
3
2
2
2
2
1
2
2
3
4
4
2
2
2
2
4
2
2
2
2
2
3
2
2
3
2
2
2
2
1
2
2
4
4
4
4
1: Dance Kit 1 2: Dance Kit 2
Note No.
35
1
2
3
4
5
6
7
8
9
Mission LFO
65 Sick Brass
1
2
3
4
5
6
7
8
9
Maze Magic
Trance Pad 1
Taurus/S&H
S&H VCF
66 4 ChordTrick
67 Cyber Swing1
68 Cyber Swing2
69 Ravesequence
70 Panned Claps
71 Dance Brass
72 OB Voyages
73 Planet XP...
74 Juno Texture
75 Wet & Wild
76 20 Years ago
77 Pygmalion
78 Micro Cosmos
79 AmbientIntro
80 AmbientChoir *
81 Tekno Vox
82 Future Split
83 BPF OrganVox*
84 Ace of Vox
85 Injection
*
Scratch 1
808 Kick
WhatIsThis?
Pulsey Hamng
Sublimation
Cheesy
Round Kick
808 SN
Round Kick
808 Kick
36
37
38
39
40
C2
*
Trailer
Natural SN2
Piccolo SN
Ballad SN
808 Kick
Natural SN1
808 Claps
808 SN
BPF-SweepPad
Do Ya See?
Wow!!
*
*
*
*
*
Low Pressure
Labyrinth 2
Childhood
Piper
808 SN
41
42
Vocal Phrase
Cl HiHat 1
Dry Tom Lo
Pedal HiHat
Dry Tom Hi
Op HiHat
Dry Tom Hi
808 Kick
606 HiHat Cl
Op HiHat
606 HiHat Cl
Op HiHat
606 HiHat Op
Op HiHat
808 Kick
10 Chucka-Clav
11 Raver Clav
12 Synscat
13 Sweep Delay
14 JX3P Poly
15 Poly Pulse
16 FAT JP6
17 After Rave
18 Bend Me !
19 Chroma Poly
20 Acid Octaves
21 Froggy Wave
22 FeedbckSynth
23 5th Synth
24 DLM Synth
25 High Rasp
26 Insectacid
27 U SAW it ?
28 Porta Juno
29 Keep the Owz
30 Basic Reso
31 Rave Wave
32 Pigale Synth
33 Rubber Synth
34 Tape Strings
35 Dirty Str.
36 House Strngs
37 Flange Pad
38 Symphonie
39 Raw Saw
40 Simple Pad
41 JX Squares
42 Dance Lead
43 Joe le Remix
44 Ring Leader
45 Woody Synth
46 Soft S&H
47 FXM Lead
48 HipHop Lead
49 MidRiff 1
50 Cheep Square
51 Rough Wave
52 Acid Guitar
53 SQU Sequ.
54 Plik-Plok
55 Velo Click
56 Sequence it!
57 Analog Seq 2
58 Xmod Attack
59 Minor Chord
60 Computer BPM
43
44
45
46
47
10 Sirens Pad
11 Dual Juno
*
*
12 Power Saw
13 S&H Pad 5th
14 Bs+AnaSeq
15 HyperHit
C3 48
50
*
*
*
*
Crash 1
Crash 1
49
51
*
*
808 SN
Ride 2
Tin Wave
Voice Breath
Tin Wave
Tin Wave
R8 Click
Cl HiHat 1
R8 Click
Round Kick
52
REV Crash 1
Ride Bell 1
606 HiHat Cl
Crash 1
606 HiHat Cl
Crash 1
16 Fx Split
*
*
*
17 DanceSplit 1
18 DanceSplit 2
19 Bass/Lead 2
20 Bass/Lead 3
21 Tekno Set 1
22 Tekno Set 2
23 NEXTGENER..
24 Resonance
25 Hemenway
26 Dub RPS
53
54
56
58
*
*
*
*
86 Dance Piano
87 HousePiano 2 *
55
57
88 Space Piano
89 Sine Rhodes
90 Retrosquares
91 Filthy EP
92 Perc Marcato
93 Soul Pad
94 Tecno Bells
95 Sqr Organ 1
96 SH-101 Bass
97 TB-303 Bass
98 Acid 404
*
*
*
*
*
*
606 HiHat Op Crash 1
59
Ride 2
Ballad SN
808 Kick
REV Crash 1
Ballad SN
Crash 1
Ballad SN
Op HiHat
Tin Wave
Op HiHat
Tin Wave
Op HiHat
Tin Wave
808 Claps
*
*
Bongo Hi
Bongo Lo
Cga Mute Hi
Cga Open Hi
Cga Open Lo
Timbale
Timbale
Agogo
Agogo
Cabasa Cut
Maracas
C4 60
62
61
63
*
64
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
27 Funk2 RPS
28 JungleTc RPS
29 Jungle RPS
30 Trip Hop RPS
31 Hip Hop2 RPS
32 Techno RPS
65
66
68
70
67
99 READ
100 Goa Bass 1
101 Goa Bass 2
102 Infra Bass
103 Jungle Bass
104 Ecta Bass
105 Metal Bass
106 MC-202 Bass
107 JP-4 Bass
108 Super Sine
109 NoDry Bass !
110 Ana Bass 1
111 Sweepy Bass
112 Ana Bass 2
113 PWM Bass
69
71
Soft Pad B
Heavy Gtr B+ Hybrid Kick1
C5 72
74
Long Guiro
Long Guiro
Claves
Wood Block
Wood Block
Cuica
BreathNoise
Natural SN1
Round Kick
808 SN
808 Kick
606 HiHat Cl
808 SN
73
75
76
77
78
80
82
Cuica
79
*
Open Triangl 606 HiHat Cl
Open Triangl 808 SN
81
*
*
*
*
Cabasa Cut
Tambourine
Old Kick
606 HiHat Op
606 HiHat Cl
Round Kick
Lite Kick
83
114 V-ResMicroBs *
115 PhoneIn Bass
116 Sub 8va Bass
117 Moody Bass
118 Fat Bass
*
*
*
*
C6 84
86
Scratch 1
85
87
Natural SN2
Scratch 3
White Noise
Synth Saw 1
Synth Pulse1
Back Hit
Ballad SN
Natural SN1
Ballad SN
Lite Kick
Op HiHat
Lite Kick
*
*
*
88
119 Modular Bass *
120 Dance Bass
121 Bubble Bass
122 HUGE Bass
123 Saucers
*
*
89
90
92
94
*
*
91
Tekno Hit
Orch. Hit
Op HiHat
Spectrum
124 Working Rezo
93
61 FXM Saw Horn *
62 Dyna Hit
63 Owz it !
125 WhatWasThat? *
126 IntrudeAlert
127 Sync Sirens
Philly Hit
Op HiHat
95
*
REV Back Hit Finger Snaps
Scratch 1
R8 Click
China Cym
R8 Click
C7 96
98
64 Scratch Auto
128 TR909 36/38
97
MC500 Beep 2 Metronome 2
V: number of voices
DanceKit
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Profiles of composers
Alex Wurman
his own group, named “SO–DA!”. He is currently regarded
as one of Japan’s top keyboardists. His warm arrangements,
which capture some of the essences of jazz, have received
wide acclaim.
Born in Chicago, IL 1966 into a family of musicians, Wurman
has been playing the piano and composing music since the
age of five, With a background in Classical and Jazz compo-
sition, Wurman moved to Los Angels in 1991 to score films.
After working with Hans Zimmer and Media Ventures on
films such as “Younger and Younger”, “I’ll do Anything”
and “The Lion King”, Wurman went on to score films to his
own credit. Titles include “French Exit”, “The Grave”, “The
Crew”, “Getting In”, and “Dorminion”.
Toshiki Nunokawa: Born Jul. 29, 1958 in Tokyo. With the
Beatles as his first inspiration, he picked up a guitar and
started playing in a rock band while still in his early teens.
By the time he got to high school, however, his attention had
shifted to the music of Wes Montgomery, and he began
playing jazz. During his college days (Tokyo Industrial) he
played with the Mickey Curtis band. That gig triggered the
beginning of his professional career. He has since been kept
busy as an accompaniment artist with a wide range of talent,
including Tsuyoshi Yamamoto, Masanori Sasaji, Peter
Erskine and Mark Johnson. His work from 1985-87 with “Hit
and Run” by “MALTA” is especially memorable.
Jean-Philippe Rykiel
Born blind in 1961, Jean-Philippe Rykiel taught himself
piano from a very early age. His technical mastery of the
synthesizer and unique creative intuition rapidly bought
him recognition by his contemporaries, providing him many
experiences and collaborations. As programmer or sound
designer, instrumentalist of composer, arranger or (co) pro-
ducer, Jean-Philippe Rykial has worked with Vangelis, Steve
Hillage, Jon Hassell, Leonard Cohen, Salif Keita, Youssou
N’Dour... To name a few... Recent credits include the albums
“Songs of Awakening”, a collection of Tibetan prayers
arranged and performed with master singer Lama Gyurme
(Sony), and “Folon”, Salif Keita’s latest release featuring
tracks arranged and produced by Jean-Philippe.
Naoki Matsuura (GigBag)
While living in the USA for 10 years, he started playing as a
professional bass player. Mainly he was playing local live
and studio sessions around New England area. Naoki joined
many sessions and gigs with Paquito De Rivera, Tommy
Campbell, etc. He joined Tiger Okoshi's band: Tiger's Baku.
Since 1991 Naoki joined Roland as a musical director of
MIDI Data. At present he has left the company, and is
recharging his batteries for new projects.
Scott Wilkie
Scott Wilkie is a keyboardist and composer originally from
Detroit, Michigan. His work as a studio musician and sound
designer can be heard on many projects. He has performed
live with various artists, including Ronnie Foster, EarlKlugh,
Jeff Baxter, David Goldblatt, Ricky Lawson, Mike Miller and
others. In addition, he has worked as a synth programmer,
most recently for Disney’s Broadway production of Beauty
and the Beast. For Roland, Scott appears frequently through-
out the United States, Asia, Europe and South America as a
clinician and product demonstrator. Now living in Los
Angeles, he performs with his own group and is involved as
a musician and producer on various projects.
Mitsuru Sakaue
From his college days, Mitsuru Sakaue has been active as a
keyboard player and arranger in studio and commercial
music production. At present he is involved in production of
commercials for TV and radio as a composer, arranger, key-
board player and computer music expert. His highly
acclaimed musical abilities go beyond borders of musical
genre. He is the chief director of the Idecs Inc. group of cre-
ative musical artists.
Idecs Inc.
Through the SMF data creations they offer, this professional
sound production unit continues to generate new excitement
throughout the realm of music data. The overwhelming
quality of their music has created for them an enormous fol-
lowing among consumers of music data. Additionally, their
other activities within the realm of music reach into almost
every area—whether it be composing, arranging, producing,
or education.
Mavin Sanders
Marvin Sanders is a musician with credits including Toyota,
Bocing, Disney, Intel, Miller Beer, and Max Factor. He has
written music for the syndicated television show
Highlander, and worked as a sound designer for Van Dyke
Parks, E, Warner Brothers, and Michael Jackson. A former
Keyboard Product Manager and international clinician for
Roland, he has also compose demos for the RD-500, JD-990,
and JV-880.
Tatsuya Senoh
A Roland engineer who is a member of the XP-80 develop-
ment team, and also the possessor of a deep understanding
of music. The included disk contains demo songs created by
Mr. Senoh that introduce the RPS function which he himself
developed.
Masashi Hirashita, Kazuko Hirashita
Masashi and Kazuko both started studying classical piano
when they were in their infancy. Both went on to study com-
position. At the same time, they had started their own music
careers as keyboardists and composers. Their work covers a
wide spectrum of styles and activities, including pop, fusion
and jazz music as well as many writing and producing jobs.
Kiyotaka Takiyama
Born in 1964 in Tokyo, Mr. Takiyama entered the Berkeley
College of Music in 1986, majoring in theory, arrangement,
and drum. While still in school he participated in both live
and recording sessions with numerous musicians. Since his
return to Japan he has continued to be involved in recording
with many different artists, and has also done television
commercial work. At present he continues to be active in
both live performance and in recording.
Pendulum (Yuuichi Ootsuka, Toshiki Nunokawa)
Yuuichi Ootsuka: Born Dec. 17, 1958 in Tokyo. Began his
professional music career while still a member of Keio
University’s “Modern Jazz Society.” He won recognition
through his skillful use of the synthesizer to produce a
refreshingly colorful sound. While performing as supporting
musician for a wide range of popular artists, he also formed
01011334 '97-9-B3-51D
36
Download from Www.Somanuals.com. All Manuals Search And Download.
|