Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
product’s enclosure that may be of sufficient magnitude to
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
constitute a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
The exclamation point within an equilateral triangle is
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
For the U.K.
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using this unit, carefully read the sections entitled: “IMPORTANT
SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 6), and
“Important Notes” (p. 9). These sections provide important information
concerning the proper operation of the unit. Additionally, in order to feel
assured that you have gained a good grasp of every feature provided by your
new unit, owner’s manual should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Operation with the Cursor Button ➜ p. 25
Most tasks are carried out by pressing the button for the function you want
to use, then using the cursor button and the [ ] and
[
] buttons, [-][+] button at the panel center.
This allows you to enjoy a wide variety of performances
with simple operations.
Read Notations as You Perform
➜ p. 26
You can show notations in the display and follow the
notes as you play.You can turn the pages in the
notation with the pedals, and display
lyrics and fingering number as well.
You can display the notation not just
for the internal songs, but also for
songs you record yourself.
i
t
o
s
S
o
y
o
g
n
Listening
Try checking out the notations
as you perform.
To Learn What Kinds of Songs are Included
➜ p. 41
The HPi-7S features 183 internal songs in a wide range
of musical genres, from piano practice songs to pops.
Listen to Phrases with a Variety of
Instrument Sounds
➜ p. 51
You can listen to phrases (brief performances) using a
variety of sounds to learn which tones are suited to
each kind of performance.
Listen to Music Files
➜ p. 44, p.47
You can enjoy listening to music CD and SMF music
files.
n
u
r
r
O
o
f
w
Playing
Change the Keyboard Touch ➜ p. 53
Perform with a Variety of Sounds ➜ p. 51
You can change the sense of heft in the keys (the touch),
making it lighter or heavier to match the player’s finger
strength.
Not only can you perform using piano sounds, you can
also select other sounds suited to the material you are
playing.
Use the Pedals ➜ p. 29
Layer Two Sounds as You Play ➜ p. 56
Enjoy authentic piano performances using the pedals.
You can perform with two different sounds, for example
piano and strings, layered together. Layering lets you give
the sound greater substance.
Perform in Singer’s Ranges ➜ p. 68
When accompanying vocal performances, you can
transpose the keyboard to match the vocalist’s register,
simply and easily with the score (the actual keys played)
unchanged.You can also change songs in difficult keys to
simpler key signatures.
Play Different Sounds in the Left and
Right Hands ➜ p. 57
You can split the keyboard into two sections and perform
using two different tones with the left and right hands.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Provides Support for Your Lessons at Home!
To Learn the Sounds and Instruments Through Games and Activities ➜ Wonderland p. 30
To Grasp the Fundamentals of Notations and the Keyboard ➜ DoReMi Course p. 32
To Master One Song Suited to Your Level of Ability ➜ Visual Lesson p. 37
To Split the Keyboard Into Two Sections For Two-Person Performances ➜ Twin Piano p. 34
n
c
e
i
on
n
o
Functions
Output Your Own Performances as
Notations ➜ p. 104
You can save the notations as image data to
external memory (optional) and use your own
computer and printer to print out these notations.
Prevent Settings from being Changed
During Performances ➜ p. 98
You can prevent your settings from being changed
as you play, even when buttons are pressed
accidentally.
Restore the Settings Programmed at
the Time of Purchase ➜ p. 98
You can restore the HPi-7S’s settings after changing
them, returning the settings to their original state at
the time the instrument was purchased.
c
e
c
e
a
e
r
t
s
Practice
Recording
Perform Using the Metronome➜ p. 63
Record Your Own Performances ➜ p. 70
You can record the performances you play.You can then play
back the recordings afterwards to check how you’ve done.
The HPi-7S includes a metronome function.You can
adjust the metronome volume level and change the tones
used for the metronome sound.
Record Along with Songs ➜ p. 73
You can record while a song is played, allowing you to
record your own performances along with songs.
Practice at Different Tempos ➜ p. 62
When practicing songs written with rapid tempos, you
can practice at reduced tempos that are easier to handle.
Save Your Recorded Performances to the
HPi-7S ➜ p. 80
Practice Just the Left or Right Hand ➜ p. 59
After recording your own performance, you can then save
it within the HPi-7S’s internal memory. This is convenient,
as the saved performances are not deleted even when the
HPi-7S’s power is turned off.You can also easily select
performances that have been saved in the piano.
You can practice each hand’s part individually, for
example, following the song’s right-hand part with your
own right hand, or playing the left-hand part in time with
the song’s right-hand part.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE UNIT SAFELY
The
symbol alerts the user to important instructions or
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle.
In the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
The
symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
The
symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
Do not disassemble or modify
Use only the included power cord
002a
008e
Do not disassemble or modify this device.
You must use only the power cord included with the
device. Do not use the included power cord with
any other device.
......................................................................................
......................................................................................
Do not repair or replace parts
Do not bend the power cord or place heavy objects
on it
003 Never attempt to repair this device or replace
parts. If repair or part replacement should become
necessary, you must contact your dealer or a
Roland service center.
009 Do not bend the power cord excessively, or place
heavy objects on the power cord. Doing so will
damage the power cord, and may cause short
circuits or faulty connections, possibly resulting in
fire or electrical shock.
......................................................................................
Do not use or store in the following types of
locations
......................................................................................
004
Do not share an outlet with an unreasonable
number of other devices
• Locations of extremely high temperature (such as
in direct sunlight, near heating equipment, or on
a device that generates heat)
• Near moisture (such as in a bathroom, near a
sink, or on a wet floor) or in locations of high
humidity
015 Do not connect excessive numbers of electrical
devices to a single power outlet. In particular,
when using a power strip, exceeding the rated
capacity (watts/amps) of the power strip may
cause heat to be generated, possibly melting the
cable.
• Locations exposed to rain
• Locations of excessive dust
......................................................................................
Avoid extended use at high volume
• Locations subject to heavy vibration
......................................................................................
010 This device, either by itself or used in conjunction
with headphones, amps, and/or speakers, is
capable of producing volume levels that can cause
permanent hearing damage. If you experience
impaired hearing or ringing in your ears, immedi-
ately stop using the device and consult a medical
specialist.
Do not place in an unstable location
007 Do not place this device on an unstable stand or a
tilted surface. You must place it in a stable and
level location.
......................................................................................
Connect the power cord to an outlet of the correct
voltage
......................................................................................
008a
Do not insert foreign objects
You must connect the power cord to an AC outlet
of the correct voltage as marked on the device.
011 Never allow foreign objects (flammable objects,
coins, wires, etc.) to enter this device.
......................................................................................
This can cause short circuits or other malfunctions.
......................................................................................
6
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE UNIT SAFELY
Turn off the power if an abnormality or
malfunction occurs
Place in a well ventilated location
101a
When using this device, ensure that it is placed in
a well ventilated location.
012a
If any of the following should occur, immediately
turn off the power, disconnect the power cord from
the AC outlet, and contact your dealer or a service
center to have the device serviced.
..........................................................................................................
Grasp the plug when connecting or disconnecting
the power cord
• The power cord is damaged
102b
• The device produces smoke or an unusual smell
• A foreign object enters the device, or liquid
spills into the device
When connecting or disconnecting the power cord
to/from an AC outlet or the device itself, you must
grasp the plug, not the cord.
• The device becomes wet (by rain, etc.)
• An abnormality or malfunction occurs in the device
......................................................................................
..........................................................................................................
Periodically wipe the dust off the power cord plug
103a
Do not allow children to use without supervision
From time to time, you should unplug the power
013 In households with children, take particular care
against tampering. If children are to use this device,
they must be supervised or guided by an adult.
cord from the AC outlet and use a dry cloth to wipe
the dust off of it. You should also unplug the power
cord from the AC outlet if you will not be using the
device for an extended period of time. Dust or dirt
that accumulates between the power cord plug and
the AC outlet can cause a short circuit, possibly
resulting in fire.
......................................................................................
Do not drop or subject to strong impact
014 Do not drop this device or subject it to strong
impact.
..........................................................................................................
Manage cables for safety
......................................................................................
104 Ensure that the connected cables are organized
and managed in a safe manner. In particular,
place the cables out of reach of children.
Do not use overseas
016 If you wish to use this device overseas, please
contact your dealer or a service center.
..........................................................................................................
Do not stand or place heavy objects on this device
......................................................................................
Do not use a CD-ROM in an audio CD player or
DVD player
106 Do not stand on this device, or place heavy objects
on it.
023
..........................................................................................................
Do not connect or disconnect the power cord with
wet hands
If you attempt to play back a CD-ROM in a conventional
audio CD player or DVD player, the resulting high
volume may damage your hearing or your speakers.
......................................................................................
107b
Do not connect or disconnect the power cord to the
Do not place containers of water on the device
device or AC outlet while holding the power cord
plug with wet hands.
026 Do not place containers of water (such as a flower
vase) or drinks on the device. Nor should you
place containers of insecticide, perfume, alcoholic
liquids, nail polish, or spray cans on the device.
Liquids that spill into the device may cause it to
malfunction, and may cause short circuits or faulty
operation.
..........................................................................................................
Cautions when moving this device
108d
When moving this device, please check the
following cautions. Then, make sure that at least
three persons work together in lifting and carrying
the device, all the while making sure to keep it
hands or drop the device on your feet.
......................................................................................
1
• Check whether the knob bolts fastening the
device to its stand have become loose. If they
are loose, tighten them firmly.
• Disconnect the power cord.
• Disconnect external devices.
• Raise the adjuster of the stand(p. 29).
2
3
4
5
• Close the lid.
• Remove the music stand.
8
..........................................................................................................
7
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE UNIT SAFELY
Unplug the power cord from the AC outlet before
cleaning
109a
Before you clean the device, turn off the power and
unplug the power cord from the AC outlet (p. 17).
..........................................................................................................
If there is a possibility of lightning strike,
110a
If there is a possibility of lightning strike, immedi-
ately turn off the power and disconnect the power
cord from the AC outlet.
..........................................................................................................
Cautions when opening/closing the lid
116 Be careful when opening/closing the lid so you do
not get your fingers pinched (p. 17). Adult super-
vision is recommended whenever small children
use the unit.
..........................................................................................................
Keep small items out of the reach of children
118cTo prevent small items such as the following from
being swallowed accidentally, keep them out of the
reach of children.
• Included items
• Screws for assembling the stand
• Wing nut for headphone hook
• Removed parts
• Music rest attachment screws
• Volume knob
..........................................................................................................
203
* GS (
) is a registered trademark of Roland
Corporation.
Add
* XG lite (
Corporation.
) is a registered trademark of Yamaha
Add
* This product uses certain software of the
“Independent JPEG Group.”
220
* All product names mentioned in this document are
trademarks or registered trademarks of their
respective owners.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Notes
In addition to the “USING THE UNIT SAFELY” listed on page 6–8, please observe the following cautions.
Power Supply
• Do not connect this device to the same electrical outlet as an
Care
301
401b
• For everyday care, wipe with a soft dry cloth, or remove
inverter-controlled device such as a refrigerator, microwave
oven, or air conditioner, or a device that contains an electric
motor. Depending on how the other device is used, power
supply noise could cause this device to malfunction or produce
noise. If it is not practical to use a separate electrical outlet,
please connect this device via a power supply noise filter.
stubborn dirt using a tightly wrung-out cloth. If this device
contains wooden components, wipe the entire area
following the direction of the grain. The finish may be
damaged if you continue strongly rubbing a single location.
Addition
• If water droplets should adhere to this device, immediately
wipe them off using a soft dry cloth.
307
402
• Before you make connections, you must switch off the power
• Do not use solvents such as benzene, thinner, or alcohol,
on all devices to prevent malfunction and/or speaker damage.
since these can cause deformation or color change.
308
4•03 The pedals of this device are made of brass.
• When you turn off the power, the screen and indicators of this
device will go dark, but this does not mean that the main power
supply is completely disconnected. If you need to completely shut
off the power supply, turn off the power switch of this device and
then unplug it from the AC outlet. Connect this device to an AC
outlet that is as close and accessible as possible.
Brass has a natural tendency to oxidize and become tarnished.
If this occurs, use a commercially available metal polish.
Servicing
452
• If you return this device for servicing, the contents of
memory may be lost. Please store important contents on
USB memory, or make a note of the contents. We take
utmost care to preserve the contents of memory when
performing service, but there may be cases when the stored
content cannot be recovered because the memory section
has malfunctioned. Please be aware that we cannot accept
responsibility for the recovery of lost memory content or for
any consequences of such loss.
Location
351
• If this device is placed near devices that contain large
transformers, such as power amps, hum may be induced in
this device. If this occurs, move this device farther away or
change its orientation.
352a
• If this device is operated near a television or radio, color
distortion may be seen in the television screen or noise may
be heard from the radio. If this occurs, move this device
farther away.
Other Cautions
• Stored content may be lost due to a malfunction of the
352b
551
• Keep your cell phone powered off or at a sufficient distance
from this device. If a cell phone is nearby, noise may be
heard when a call is received or initiated, or during
conversation.
device or because of inadvertent operation. You should
back up important content on USB memory as a safeguard
against such loss.
354b
552
• Do not leave this device in direct sunlight, near devices that
• We cannot accept responsibility for the recovery of any
produce heat, or in a closed-up automobile. Do not allow
illumination devices operated in close proximity (such as a
piano light) or powerful spotlights to shine on the same
location on this device for an extended time. This can cause
deformation or color change.
content lost from internal memory or USB memory, or for
the consequences of such loss.
553
• Do not apply excessive force to the buttons, knobs, or
input/output jacks, since this may cause malfunctions.
554
355b
• Never strike or apply strong pressure to the display.
• If you move this device between locations of radically different
556
temperature or humidity, water droplets (condensation) may
form inside the device. Using the device in this condition will
cause malfunctions, so please allow several hours for the
condensation to disappear before you use the device.
• When connecting or disconnecting cables, grasp the plug
(not the cable) to prevent short circuits or broken
connections.
557
• This device may produce a certain amount of heat, but this
356
• Do not allow items made of rubber or vinyl to remain on
is not a malfunction.
558a
top of this device for an extended time. This can cause
deformation or color change.
• Please enjoy your music in ways that do not inconvenience
other people nearby, and pay particular attention to the
volume at nighttime. Using headphones will allow you to
enjoy music without having to be concerned about others.
3•58 Do not leave objects on top of the keyboard. This can
cause malfunctions such as failure to sound.
359
559b
• Do not affix adhesive labels to this device. The exterior
• When transporting or shipping this device, package it in an
finish may be damaged when you remove the labels.
appropriate amount of cushioning material. Scratches,
damage, or malfunctions may occur if you transport it
without appropriate packaging.
5•60 If using the music rest, do not apply excessive force to it.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Notes
562
705
• Some connection cables contain a resistor. Do not connect
• Do not touch the pins of the USB memory connector, or
such cables to this device. Doing so may make the volume
extremely low or inaudible. Please use connection cables
not containing a resistor.
allow them to become dirty.
708
• USB memory is made using high-precision electronic
components, so please observe the following points when
handling it.
565
• Before opening or closing the keyboard lid, always make
sure that no pets or other small animals are located on top
of the instrument (in particular, they should be kept away
from the keyboard and its lid). Otherwise, due to the
structural design of this instrument, small pets or other
animals could end up getting trapped inside it. If such a
situation is encountered, you must immediately switch off
the power and disconnect the power cord from the outlet.
You should then consult with the retailer from whom the
instrument was purchased, or contact the nearest Roland
Service Center.
• To prevent damage from static electrical charges,
discharge any static electricity that might be present in
your body before handling USB memory.
• Do not touch the terminals with your fingers or any metal
object.
• Do not bend or drop USB memory, or subject it to strong
impact.
• Do not leave USB memory in direct sunlight or in
locations such as a closed-up automobile. (Storage
temperature: 0–50 degrees C)
• Do not allow USB memory to become wet.
• Do not disassemble or modify USB memory.
Floppy Disk Handling
Addition
(Using Optional Floppy Disk Drive)
• When connecting USB memory, position it horizontally with
651
the external memory connector and insert it without using
excessive force. The external memory connector may be
damaged if you use excessive force when inserting USB
memory.
• Floppy disks contain a plastic disk with a thin coating of
magnetic storage medium. Microscopic precision is
required to enable storage of large amounts of data on
such a small surface area. To preserve their integrity,
please observe the following when handling floppy disks:
• Never touch the magnetic medium inside the disk.
• Do not use or store floppy disks in dirty or dusty areas.
• Do not subject floppy disks to temperature extremes
(e.g., direct sunlight in an enclosed vehicle).
Addition
• Do not insert anything other than USB memory (e.g., wire,
coins, other types of device) into the external memory
connector. Doing so will damage the external memory
connector.
Addition
• Do not apply excessive force to the connected USB
Recommended temperature range: 10–50 degrees C
(50–122 degrees F).
memory.
Addition
• Do not expose floppy disks to strong magnetic fields,
such as those generated by loudspeakers.
• If you will not be using USB memory for an extended period
of time, close the USB memory cover.
652
• Floppy disks have a “write protect” tab which can protect
Handling the CDs (CD-ROMs)
the disk from accidental erasure. It is recommended that the
tab be kept in the PROTECT position, and moved to the
WRITE position only when you wish to write new data onto
Add
• When handling the discs, please observe the following.
• Do not touch the encoded surface of the disc.
• Do not use in dusty areas.
the disk.
fig.DiskProtect.e.eps
• Do not leave the disc in direct sunlight or an enclosed
vehicle.
Rear side of the disk
801
• Avoid touching or scratching the shiny underside (encoded
Write
surface) of the disc. Damaged or dirty CD-ROM discs may
not be read properly. Keep your discs clean using a
commercially available CD cleaner.
(can write new data onto disk)
Add
Protect
Write Protect Tab
• Keep the disc in the case.
(prevents writing to disk)
Add
653
• Do not keep the disc in the CD drive for a long time.
• The identification label should be firmly affixed to the disk.
Should the label come loose while the disk is in the drive, it
may be difficult to remove the disk.
Add
• Do not put a sticker on the label of the disc.
A•dd Wipe the disc with a soft and dry cloth radially from inside
to outside. Do not wipe along circumference.
654
• Store all disks in a safe place to avoid damaging them, and
to protect them from dust, dirt, and other hazards. By using
a dirty or dust-ridden disk, you risk damaging the disk, as
well as causing the disk drive to malfunction.
Add
• Do not use benzine, record cleaner spray or solvents of any
kind.
Add
• Do not bend the disc. Bending discs may prevent proper
USB Memory Handling
• When connecting USB memory, firmly insert it all the way
reading and writing of data, and may further result in
malfunction.
704
in.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
In order to enjoy reliable performance of your new keyboard for many years to come, please take the time to
read through this manual in its entirety.
How To Use This Manual
Please start out by reading “Before You Begin Playing” in the Owner’s Manual (this volume). This explains how
to connect the HPi-7S’s power cord and how to turn on the HPi-7S’s power.
This Owner’s Manual describes procedures covering everything from mastering the basic operations used for
the HPi-7S’s performance functions to more advanced procedures, which allow you to create songs on the
HPi-7S.
■ Conventions Used in This Manual
This manual uses the following conventions in the interest of simpler, more concise instructions.
• Button names are enclosed in square brackets “[ ]”, as in [Reverb] button.
• For easier readability, some screens and colors used here may differ in part from actual screens and colors.
• On screen text is enclosed in angled brackets “< >”, as in <Close>.
NOTE
• An asterisk (*) or a
not be ignored.
at the beginning of a paragraph indicates a note or precaution. These should
• (p. **) refers to pages within the manual.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction......................................................................................... 11
How To Use This Manual..................................................................................................11
Conventions Used in This Manual.............................................................................11
Setting Up for Performing..................................................................................................16
Attaching the Music Rest..........................................................................................16
Using the Music Holders..........................................................................................16
Connecting the Pedal Cord......................................................................................16
Connecting the Speaker Cable.................................................................................16
Connecting the Power Cord.....................................................................................17
Opening and Closing the Lid ...................................................................................17
Turning the Power On/Off................................................................................................18
Adjusting the Volume of the Sound ...........................................................................18
Connecting Headphones ..................................................................................................18
Using the Headphone Hook.....................................................................................19
Connecting a Microphone ................................................................................................19
Adjusting the Contrast of the Screen...................................................................................20
Using USB Memory/Floppy Disk........................................................................................20
Connecting USB Memory ........................................................................................20
Installing the Floppy Disk Drive.................................................................................20
Using CD........................................................................................................................21
Connecting a CD Drive ...........................................................................................21
Basic Operation ..............................................................................................................25
Basic Screen ...................................................................................................................26
Notation Screen.....................................................................................................26
List Screen .............................................................................................................28
Detailed Settings Screen..........................................................................................28
Messages..............................................................................................................28
About the Pedals..............................................................................................................29
Playing in a Wonderland of Sound....................................................................................30
Learning the Basics of Reading Music (DoReMi Course)........................................................32
DoReMi (Pitch Training)...........................................................................................33
Note and Rest (Rhythm)...........................................................................................33
Fingering Number ..................................................................................................33
Thumb Under .........................................................................................................33
Splitting the Keyboard Into Two Sections for Four-Hand Performances (Twin Piano)..................34
Taking a Lesson While Playing a Two-Person Game (Twin Piano Game) .......................35
Changing the Way in Which the Sound is Heard (Twin Piano Mode) ...........................36
Playing Songs Using the Lesson Functions (Visual Lesson)......................................................37
Practicing with Internal Songs and Songs on USB Memory ..........................................40
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs .......................................................................... 41
Listening to the Internal Songs............................................................................................41
Playing Songs Consecutively (All Song Play) ..............................................................43
Listening to Music Files or a Song that was Saved on USB Memory........................................44
Registering the Songs You Like (Favorites)...........................................................................45
Removing Songs from Favorites................................................................................46
Playing a Music CD or Audio File......................................................................................47
Adjusting the Volume of an Audio File or Music CD....................................................49
Playing the Keyboard Like a Piano (One Touch Piano)..........................................................50
Performing with a Variety of Tones.....................................................................................51
Playing Percussion Instruments or Sound Effects ...................................................................52
Adjusting the Keyboard Touch (Key Touch) .........................................................................53
Applying Effects to the Sound............................................................................................54
Adding Reverberation to the Sound (Reverb)..............................................................54
Adding Richness to the Sound (Chorus) .....................................................................54
Adjusting the Brightness of the Sound (Brilliance)........................................................55
Adding Liveliness to the Sound (Dynamics Sound Control) ...........................................55
Playing Two Sounds Layered Together (Dual) ......................................................................56
Playing Different Sounds in the Right and Left Hand (Split) ....................................................57
Playing Along with Songs .................................................................................................59
Adjusting the Tempo ........................................................................................................62
Playing Back at a Fixed Tempo (Tempo Mute)............................................................62
Using the Metronome.......................................................................................................63
Adding a Count to Assist Your Timing ................................................................................64
Assigning Markers to a Song for Repeated Practice .............................................................66
Assigning a Marker in the Middle of a Measure (Resolution)........................................67
Changing the Key of the Keyboard or Song Playback (Transpose) .........................................68
Recording a New Song....................................................................................................70
Saving Recorded Performances to the Favorites ...................................................................72
Recording Along with a Song............................................................................................73
Re-recording....................................................................................................................75
Erasing a Recorded Song .................................................................................................76
Erasing the Performance on Specific Tracks ...............................................................76
Recording Songs Starting with Pickups ...............................................................................76
Multitrack Recording on Five Tracks ...................................................................................77
Using External Memory ....................................................................................................78
Connecting an USB Memory....................................................................................78
Rotating the External Memory Connector Holder ........................................................78
Formatting Media (Format)................................................................................................79
Saving Songs..................................................................................................................80
Deleting Saved Songs ......................................................................................................83
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Copying Songs on USB Memory to Favorites ......................................................................84
Copying Songs Saved in Favorites to USB memory.....................................................85
Functions that Can be Selected Using the [Function] Button ...................................................86
Making the Settings ................................................................................................86
Adjusting the Piano Sounds (Piano Designer).......................................................................86
Opening/Closing the Piano Lid (Lid) .........................................................................86
the Force Used to Play the Keys (Hammer Response)...................................................86
Setting the Tuning Curve (Stretch Tuning)...................................................................87
Adjusting the Keyboard Touch (Key Touch) ................................................................87
Listening to a Piano Designer demo ..........................................................................87
Setting the Reference Pitch and Temperament (Tuning)..........................................................88
Tuning to Other Instruments’ Pitches (Master Tuning) ...................................................88
Changing the Tuning (Temperament).........................................................................88
Setting the Tonic (Key).............................................................................................88
Adjusting the Depth of the Effects (Effect) ............................................................................89
Giving the Sound More Spatial Depth (3D Sound Control)....................................................89
Adjusting the Depth of the Sound (Depth) ..................................................................89
Adjusting the Volume of an Audio File (Audio Volume).........................................................90
Adjusting the depth of mic echo (Mic Echo).........................................................................90
Adjusting the tonal character (Equalizer).............................................................................90
Changing the equalizer type....................................................................................90
Changing the Equalizer Settings (Equalizer)...............................................................90
Changing the Pedal Functions (Pedal).................................................................................91
Changing the Language Displayed in the Screen (Language) ................................................92
Selecting Images to be Shown on the Displays (User Image Display)......................................92
To Delete a Saved Image.........................................................................................92
Playing the Demos ...........................................................................................................93
Setting the Demo (Auto Demo)...........................................................................................93
Recording and Playing Back Performances of Specific Instruments (16 Track) ..........................94
Changing the Tone Settings When Playing Back Songs (Play Mode) ......................................96
Displaying the Lyrics (Lyrics)..............................................................................................96
Adjusting the Volume (Master Gain)...................................................................................96
Formatting the User Memory (Initialize User Memory)...........................................................97
Restoring the Original Default Settings (Factory Reset) ..........................................................98
Using the V-LINK Function.................................................................................................98
Disabling the Buttons (Panel Lock) ......................................................................................98
Changing the Notation Screen Settings ..............................................................................99
Editing Songs (Song Edit)................................................................................................100
Undoing Edits (Undo)............................................................................................100
Copying Measures (Copy).....................................................................................101
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting Timing Discrepancies (Quantize) ............................................................101
Deleting Measures (Delete) ....................................................................................102
Inserting Blank Measures (Insert).............................................................................102
Transposing Individual Parts (Transpose)..................................................................102
Making Measures Blank (Erase) .............................................................................103
Exchanging Parts (Part Exchange)...........................................................................103
Correcting Notes One by One (Note Edit)...............................................................103
Modifying the Tone Changes in a Song (PC Edit) .....................................................104
Saving the Notation Data in BMP Format..........................................................................104
Connecting to Audio Equipment ......................................................................................106
Connecting to MIDI Devices ............................................................................................107
the HPi-7S’s Performance Data to a MIDI Sequencer .................................................107
Making MIDI-Related Settings..........................................................................................108
Selecting the Transmit Channel (Transmit Channel) ...................................................108
Sending Tone Change Messages
(Program Change/Bank Select MSB/Bank Select LSB) ..............................................109
Connecting a Computer..................................................................................................109
Making the Settings for the USB Driver .............................................................................110
Connecting an External Display or Television ....................................................................111
Connecting an External Display..............................................................................111
Connecting a Television ........................................................................................111
(External Display)..........................................................................................................112
Display Method....................................................................................................112
Setting the Duration for Displaying Images (Slide Show Interval).................................112
Troubleshooting.............................................................................................................113
Error Message...............................................................................................................116
Tone List .......................................................................................................................117
Drum/SFX Set List ..........................................................................................................119
Internal Song List ...........................................................................................................123
Songs for Visual Lesson ..................................................................................................124
Beginner’s Course ................................................................................................124
Repertoire Course.................................................................................................124
Challenge Course.................................................................................................124
Music Files That the HPi-7S Can Use ................................................................................125
The HPi-7S Allows You To Use the Following Music Files ...........................................125
About the HPi-7S Sound Generator.........................................................................125
MIDI Implementation Chart .............................................................................................126
Main Specifications .......................................................................................................127
Index............................................................................................................................129
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin Playing
■ Using the Music Holders
You can use the holders to hold pages in place.
Setting Up for Performing
When not using the holders, leave them folded down.
fig.MusicHolders
■ Attaching the Music Rest
The music rest of the HPi-7S contains a liquid crystal display screen.
Use the following procedure, and handle the music rest with care.
1. Secure the music rest in place by turning the included
screws (at two points).
When attaching the music rest, support it firmly with one hand to
make sure that you don’t drop it. Be careful, so you don’t get
your fingers pinched.
fig.MusicRest
View from Rear
■ Connecting the Pedal Cord
1. Insert the end of the pedal cord extending from the piano
Screw
Screw
stand to the Pedal connector located at the lower part of
the HPi-7S’s rear panel.
fig.PedalCord
2. Connect the LCD cord of the music rest to the LCD Out
connector on the rear panel of the HPi-7S.
The power must be off when connecting the cable of the
music rest.
NOTE
fig.LCDCord-e
LCD Cord
Pedal Cord
■ Connecting the Speaker Cable
Do not apply excessive force to the installed music rest.
NOTE
NOTE
Be sure to use the supplied screws for attaching the music
rest.
Before moving the piano, be sure to remove the music rest to
prevent accidents.
NOTE
NOTE
Speaker Cord
Be careful not to lose the screws used to fasten the music
rest, or allow small children to accidentally swallow them.
1. Plug the speaker cable extending from the stand into the
SPEAKER connector located at the rear of the HPi-7S’s
bottom panel.
2. Pay attention to the shape of the speaker cable’s
connector, and insert it until you hear it click securely into
place.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin Playing
■ Opening and Closing the Lid
■ Connecting the Power Cord
1. Make sure that the [Power] switch located at the left side
Opening the Lid
of the front panel is off (in the upward position).
1. Use both hands to lift the lid lightly, and slide it away from
yourself.
fig.Lid
Upward
position
Lower
position
OFF
On
2. Turn the [Volume] knob all the way toward the left to
minimize the volume.
3. Connect the included power cord to the AC inlet located at
Closing the Lid
the rear of the bottom panel.
1. Pull the lid gently toward yourself, and lower it softly after
4. Plug the other end of the power cord into an AC outlet.
it has been fully extended.
fig.ACCord-e
Be careful not to get your fingers pinched when opening or
closing the lid. If small children will be using the HPi-7S,
NOTE
adult supervision should be provided.
To prevent accidents, the lid must be closed when
transporting the piano.
NOTE
AC Outlet
Power Cord
Use only the included power cord.
NOTE
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin Playing
■ Adjusting the Volume of the Sound
Turning the Power On/Off
1. Turn the [Volume] knob to adjust the overall volume.
Adjust the volume level as you play the keyboard and listen to the
Once the connections have been completed (p. 17), turn on
power to your various devices in the order specified. By
sound.
NOTE
fig.MasterVolume-e
turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other devices.
Min
Turning On the Power
Max
1. Turn the [Volume] knob all the way toward the left to
You can also adjust the headphone volume with the
[Volume] knob.
minimize the volume.
2. Press the [Power] switch.
After the power comes on, the opening animation appears in the
screen within the music rest, followed by the Notation screen.
Connecting Headphones
fig.Power-e
The HPi-7S has two jacks for plugging in headphones. This allows two
people to listen through headphones simultaneously, making it very
useful for lessons and when performing piano pieces for four hands.
Additionally, this allows you to play without having to worry about
bothering others around you, even at night.
If connecting only one pair of headphones, they can be connected to
either one of the headphone jacks.
fig.Headphones
3. Use the [Volume] knob to adjust the volume (refer to the
next section).
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before
NOTE
the unit will operate normally.
Turning Off the Power
1. Connect the headphones to the Phones (headphones) jack
on the left underside of the HPi-7S.
1. Turn the [Volume] knob all the way down.
When you connect headphones, no sound will be output from the
speakers of the HPi-7S.
2. Press the [Power] switch.
The headphone volume is adjusted by the [Volume] knob (p. 18)
of the HPi-7S.
The screen display goes blank, and the power is turned off.
If you need to turn off the power completely, first turn off the
NOTE
[Power] switch, then unplug the power cord from the power
outlet. Refer to “Power Supply” (p. 9).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin Playing
Some Notes on Using Headphones
Connecting a Microphone
You can connect a microphone into the Mic jack, and enjoy karaoke
with the HPi-7S.
• To avoid damaging or severing the headphone cord, be sure to
handle the headphones by holding the phones themselves, and
grasping the plug and not the cord when pulling the headphone
plug.
• To prevent possible auditory damage, loss of hearing, or
damage to the headphones, the headphones should not be used
at an excessively high volume. Listen at appropriate levels.
• The headphones may be damaged if the volume is too high when
they are plugged in. Connect the headphones only after turning
the volume down completely.
• Please use stereo headphones.
■ Using the Headphone Hook
Whenever you are not using the headphones, you can hang them on
the headphone hook at the lower left of the HPi-7S.
1. Connect a microphone (sold separately) to the Mic jack
Attaching the Headphone Hook
located in the jack panel on the lower left of the HPi-7S.
2. Rotate the Mic Volume knob on the left side of the Mic jack
1. Press and twist the headphone hook included with the HPi-
7S into the hole in the bottom left of the HPi-7S (refer to the
figure below).
to adjust the volume level for the microphone.
3. Adjust the mic echo (p. 90).
2. Turn the headphone hook wing nut to secure the
headphone hook.
fig.HeadphoneHook
Some Notes on Using a Microphone
• Be careful of high volume levels when using mikes late at night or
early in the morning.
• When connecting a microphone to the HPi-7S, be sure to lower
the volume. If the volume control is too high when the microphone
is plugged in, noise may be produced by the speakers.
Hole
• Howling could be produced depending on the location of
microphones relative to speakers. This can be remedied by:
Wing
nut
• Changing the orientation of the microphone.
• Relocating microphone at a greater distance from speakers.
• Lowering volume levels.
Headphone
Hook
Some Notes on Using Headphone Hook
Do not hang anything other than headphones on the headphone
hook. Doing so may damage the instrument or the hook.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin Playing
Adjusting the Contrast of the
Screen
Using USB Memory/Floppy Disk
A song you’ve recorded on the HPi-7S can be saved by copying it to
separately sold USB memory (p. 84). You can also copy songs to a
floppy disk using a separately sold floppy disk drive.
You can adjust the brightness of the HPi-7S’s display.
1. To adjust the contrast of the screen, turn the [Contrast]
You can also play back SMF music files or audio files (p. 44) saved
on USB memory or a floppy disk.
knob located at the back of the music rest.
fig.Contrast-e
Use USB memory and floppy disk drive available from
Roland. Proper operation cannot be guaranteed if other
USB device is used.
Liquid Crystal Display Cover
Rear of the Music Rest
NOTE
■ Connecting USB Memory
1. Connect the USB memory to the External Memory
connector.
fig.ConnectUSBMem.eps
Some Notes on Using the LCD Screen
• Never remove the liquid crystal display cover at the back of the
music rest. By removing it you risk electrical shock and/or
malfunction.
• You may see vertical lines in the screen, but this is due to the
structure of a liquid crystal display, and does not indicate a
malfunction. By using the [Contrast] knob to adjust the contrast of
the screen, you can minimize these lines.
Carefully insert the USB memory all the way in—until it is firmly in
place.
• The contrast of the screen may be affected by the temperature.
If you’re using new USB memory or floppy Disk, you’ll need
to initialize (format) it on the HPi-7S. For details, refer to
“Formatting Media (Format)” (p. 79).
■ Installing the Floppy Disk Drive
Attach the floppy disk drive as shown the figure, using the mounting
holes on the HPi-7S’s bottom panel.
For details of the attachment, refer to the owner’s manual of
the floppy disk drive.
External Memory Connector
External Memory
Connector Holder
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin Playing
A list of the CD drives that have been tested and found to be
compatible is available on the Roland website.
http://www.roland.com/
Using CD
You can play back audio CDs and CD-ROMs containing saved SMF
music files.
You can also play songs on VIMA CD-ROMs (VIMA TUNES)
sold by Roland.
Precautions Concerning Use of the CD
• You cannot play back CD-R/RW discs to which audio tracks
have been added or CDs containing both audio tracks and data
(CD Extra).
• The HPi-7S is capable of playing back only commercial CDs that
conform the official standards-those that carry the “COMPACT
DISC DIGITAL AUDIO” logo.
• The usability and sound quality of audio discs that incorporate
copyright protection technology and other non-standard CDs
cannot be guaranteed.
• For more detailed information on audio discs featuring copyright
protection technology and other non-standard CDs, please
consult the disc vendor.
• You cannot save songs to CDs, and you cannot delete songs
recorded to CDs. Furthermore, you cannot format CDs.
■ Connecting a CD Drive
CD drives that draw their power from the USB connector
cannot be used.
NOTE
External Memory Connector
External Memory
Connector Holder
1. Turn off the power to the HPi-7S and the CD drive to be
connected.
2. Connect the USB cable included with the CD drive to the
External Memory connector on the HPi-7S.
3. Turn on the power to the HPi-7S.
4. Turn on the power to the connected CD drive.
For information on how to perform the following CD-drive
operations, refer to the owner’s manual for the drive.
NOTE
• Switching the power on and off
• Inserting and ejecting a CD
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
Front Panel
2
3
4
6
5
1
Bottom Panel
7 8
9 10 11
35
34
Front Panel
12.[-] [+] buttons
Used to select the value that you want to set (p. 25).
1. [Power] switch
13. Cursor buttons
Pressed to switch the power on and off (p. 18).
Used to select the item that you want to set (p. 25).
Also used to select values in some screens.
2. [Volume] knob
If headphones are connected, this adjusts the headphone volume
(p. 18).
14.[ ] [ ] buttons
Press the [
] button to confirm the selections you’ve made using
the cursor buttons (11) (p. 25).
3. [Brilliance] knob
15.[
(Song)] button
Use this button to select internal songs or songs from USB
memory (p. 41–p. 48, p. 59, p. 70–p. 77).
4. [Transpose] button
Transposes the pitch of the keyboard or the song being played
(p. 68).
5. Tone buttons (Piano, E. Piano, Organ, Strings, Voice,
Others)
16.[ (Lesson)] button
You can enjoy practices using the “DoReMi Course,” “Visual
Lesson,” and other lesson functions (p. 32–p. 40).
Select the type of sound (the tone group) that will be played from
the keyboard (p. 51).
Selects various performance-related functions.
6. One Touch [
] button
Makes the optimal settings for a piano performance (p. 50).
17.[
(Notation)] button
Displays the notation in the screen (p. 26, p. 26, p. 99).
7. [Reverb] button
Adds reverberation to the sound (p. 54).
18.[
(Twin Piano)] button
Divides the keyboard into two separate sections, allowing two
people to perform in the same registers (p. 34).
8. [Chorus] button
Adds spaciousness to the sound (p. 54).
9. [Split] button
19.[
(Metronome)] button
Sounds the internal metronome (p. 63).
Lets you play different sounds in the left and right-hand areas of
the keyboard (p. 57).
20.Tempo [Slow] [Fast] buttons
10.[Key Touch] button
Adjust the tempo (p. 62).
Adjusts the touch of the keyboard (p. 53).
Simultaneously pressing the [Slow] and [Fast] buttons will restore
the basic tempo.
11.[Function] button
Selects various performance-related functions
(p. 86–p. 105, p. 108–p. 110).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
12
14
13
12
14
15 16
19
20
21
27
17
18
22 23 24 25 26 28
Bottom Panel (Front Side Left)
29
30 31
32
33
21.Track buttons
(R/Rhythm, 1/User, 2/Accomp, 3/Left, 4/Right)
Used to play back or record each track of a song
(p. 59, p. 73 – p. 77).
29.Phones jacks
A set of headphones can be connected here (p. 18).
22.[
Resets the song playback-start location to the beginning of the
song.
Adjusts the volume level for the microphone (p. 19).
31.Mic jack
Used for connecting a microphone (p. 19).
23.[
(Play/Stop)] button
This starts and stops playback and recording of songs.
32.MIDI Out/In connector
An external MIDI device can be connected here to receive
performance data (p. 107).
24.[ (Rec)] button
This lets you record your own performance into the HPi-7S (p.
69–p. 77).
33.USB connector
Used for connecting a computer to the HPi-7S using a USB cable
(p. 109).
25.[
(Bwd)] button
Rewinds the song.
26.[
(Fwd)] button
Fast-forwards the song.
HPi-7S’s Bottom Panel (Front Side Right)
27.[Wonderland] button
Here you can connect USB memory, a floppy disk drive, or a CD
drive, and play back stored songs (p. 44).
Here you can enjoy the “Drums,” “SFX,” and “Game,” and learn
about instruments while having fun (p. 30).
You can also use USB memory to save a song you’ve recorded
on the HPi-7S (p. 80).
28.[Count/Marker] button
This is used for setting the count (p. 64).
By rotating the base you can neatly store the USB memory or USB
cable.
This allow you to add and move markers in the notation as well
as repeat playback of song segments simply and easily (p. 66).
cannot be guaranteed if other USB Memory products are used.
* CD drives that draw their power from the USB connector cannot
be used.
35.Input jacks
Here you can connect a portable audio player or another
electronic musical instrument, and listen to the connected device
through the HPi-7S’s speakers (p. 106).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
Bottom Panel (Rear Left Side)
Rear Panel
1
2
3
4
5
Bottom Panel (Rear Right Side)
6
7
8
Rear Panel
1. LCD Out connector
Music Rest
fig.MusicRestFront
Connect the LCD cord of the music rest to this connector (p. 16).
9
HPi-7S’s Bottom Panel (Rear Left Side)
2. Input jacks
device or an audio device, so that the sound of that device will
be output from the HPi-7S’s speakers (p. 106).
3. Output jacks
powerful sound. They can also be connected to a tape recorder
or similar device in order to record your performance on a
cassette tape (p. 106).
fig.MusicRestRear
10
4. Pedal jack
Connect the pedal cord of the stand to this jack (p. 16).
5. AC Inlet
Connect the included power cord to this inlet (p. 17).
HPi-7S’s Bottom Panel (Rear Right Side)
6. Video Out jack
9. Display
lyrics, notations and slide show on the connected television set.
This displays notations for the internal songs and performances
recorded to the HPi-7S, in addition to a variety of settings.
* The explanations in this manual include illustrations that depict
what should typically be shown by the display. Note, however,
that your unit may incorporate a newer, enhanced version of the
system (e.g., includes newer sounds), so what you actually see
in the display may not always match what appears in the
manual.
7. Ext Display connector
Connect a external display here (p. 111). You can display the
lyrics, notations and slide show on the external display.
8. Speaker connector
Here is where you connect the speaker cable from the dedicated
stand(p. 16).
10.[Contrast] knob
This knob adjusts the contrast of the screen (p. 20).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation and the Main Screen
Basic Operation
The HPi-7S is operated mainly by pressing the button for the function you want to use, then using the
cursor buttons and [ ] [ ] [-][+]buttons in the center of the front panel while viewing the screen.
Button
How It Is Used
Use the up, down, left, and right cursor buttons to select parameters. In screens
consisting of two or more pages, pressing the cursor left and right button switches the
screen displayed.
cursor buttons
In the Settings screen, pressing the cursor up and down button changes the settings.
Finalizes the selected parameter.
The assigned function in that screen is used.
Examples: <Audition>, <Enter>, etc.
[
[
] button
] button
Opens the advanced settings screen.
Examples: <Notation Menu>, <Maker>, etc.
Closes the screen that is currently open.
Displays the Notation screen.
Change the selected value.
[-] [+] button
Correspondence Between Screens and Buttons
The functions of the cursor buttons, the [ ] button, and the [ ] button may be indicated in the screen.
fig.buttons-e
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation and the Main Screen
Basic Screen
■ Notation Screen
fig.d-Score-1-e_50
The Notation screen, like the one shown to the right, is displayed when
you turn on the power to the HPi-7S.
You can display notations not only for the internal songs, but also for
SMF music files and performances recorded with the HPi-7S as well.
The Notation screen has five pages. The screens are switched in the
following manner each time the [
If you press the [ ] button while the Notation screen is displayed, the display switches to the
“Notation+Settings” screen. Pressing the [ ] button once more while the “Notation+Settings” screen
(Notation)] button is pressed.
is displayed opens the “Notation Menu” screen.
fig.ScoreScreens.e
Notation
Notation + Keyboard
Press
Notation (Enlarged)
Press
Press
Notation (Enlarged) + Keyboard
Notation + Settings
Press
Press
You can change the following settings in the “Notation+Settings” screen.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation and the Main Screen
fig.ScoreOption2-e
Lyrics
When playing back song data that contains
lyric data, the lyrics will be displayed if you
select <On>.
* This item cannot be selected if there is no
lyric data.
Part
Pedal
Select the part(s) for which
the notation will be displayed.
When <Replay> is selected, you can start and stop
playback of the song data by pressing the left pedal
(p. 91).
When <PageTurn> is selected, you can turn the
pages of the notation by pressing the pedals. Press
the center pedal to turn to the next page in the
notation, and press the left pedal to turn to the
previous page.
When <User> is selected, you can use the functions
assigned to the pedals (p. 91).
When <Piano> is selected, the pedal
settings best suited for piano
: Notation for both hands
: Right-hand notation only
: Left-hand notation only
: User part notation
(→ to change the part, see p. 99)
Keyboard
The keyboard will be displayed
under the notation if you check this.
performances are chosen.
Left Pedal: Soft Pedal
Center Pedal: Sostenute Pedal
Right Pedal: Damper Pedal
Fingering
When playing back song data that
includes fingering numbers, the fingering
numbers will be displayed if you select
<On>. This is convenient when you want
to practice the correct fingering.
The fingers are numbered as follows:
1: thumb, 2: index finger, 3: middle
finger, 4: ring finger, 5: little finger.
* This item cannot be selected if there is
no fingering data.
Chord
the chord name will be displayed if you select <On>.
* This item cannot be selected if there is no chord data.
Press the [ ] button to open a
screen where you can choose
from a variety of options for the
notation screen (p. 99).
* If you have selected a part that contains no performance data, the notation will not show any notes. To change
the part that is displayed, refer to “Changing the Notation Screen Settings” (p. 99).
* The fingering numbers shown in the screen indicate one possible fingering.
Some Notes on the Notation Screen
• When you begin song playback, the notation screen will show
. While this symbol is displayed,
performance data is being loaded from USB memory or internal memory. Thirty seconds or longer may be
required to load the data. Please wait.
• The displayed notation is generated from the music files, and priority is given to making the display easy to
read rather than reproducing a complicated or difficult performance accurately. For this reason, you may
notice differences when compared with commercially available sheet music. In particular, this is not suitable
for display of sophisticated or complex songs that require detailed notations.
• In the notation screen, lyrics or notes may fall outside the display range of the screen, and fail to be shown.
• A notation cannot be displayed for a song from a music CD or audio file.
• If you display the notation or change the displayed part during song playback, the song may sometimes
play back from the beginning.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation and the Main Screen
■ List Screen
fig.d-ToneSelect-e_50
This type of list screen will appear when you select songs, or tones.
In this screen, use the cursor buttons to select the desired item.
■ Detailed Settings Screen
fig.d-PianoSetting1-e_50
Detailed settings for functions are made in a screen similar to this.
In this screen, you can then change the value with the cursor buttons.
An explanation of the selected item is shown below the item. For
some items, an explanation of the values will also be displayed.
When you press the [ ] button, and you’ll then be returned to the
screen that was displayed prior to the current screen.
When “P. */*” appears at the upper right of the screen, it indicates
that there are other items on the previous or next page.
■ Messages
fig.d-FactoryReset-e_50
Various messages will sometimes be displayed during operation.
These messages ask you to confirm an operation, inform you of the
results of an operation, or indicate an error when an operation
could not be performed.
For details on error messages that begin with “Error,” refer to p.
116.
When a message like that to the right appears, select an answer
with the cursor buttons, then press the [ ] button to enter your
selection. Pressing the [ ] button closes the screen that is currently
open.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation and the Main Screen
About the Adjuster
If you feel that the pedal is unstable (for example if you’ve moved the
HPi-7S to a different location), you can adjust the adjuster located on
the bottom of the pedals as follows.
About the Pedals
The pedals have the following functions, and are used mainly for
piano performance.
fig.pedal-e
• Rotate the adjustor to lower it so that it is in firm contact with the
floor. If there is a gap between the pedals and the floor, the pedals
may be damaged. In particular when placing the instrument on
carpet, adjust this so that the pedals firmly contact the floor.
fig.adjuster-e
Soft Pedal
Damper Pedal
Sostenuto Pedal
Damper Pedal (right pedal)
Use this pedal to sustain the sound.
While this pedal is pressed, notes will be sustained even after you
take your fingers off the keys.
The length of sustain will change subtly depending on how deeply you
press the pedal.
remaining strings to resonate in sympathy with the sounds that you
played from the keyboard, adding a rich resonance.
Adjuster
The HPi-7S simulates this damper resonance.
You can adjust the amount of damper resonance that occurs
when you press the damper pedal. Refer to “Adjusting
Resonance when the Damper Pedal is Depressed (Damper
Resonance)” (p. 87).
Sostenuto Pedal (center pedal)
This pedal sustains only the sounds of the keys that were already
played when you pressed the pedal.
Soft Pedal (left pedal)
This pedal is used to make the sound softer.
will have a softer tone. This is the same function as the left pedal of an
acoustic piano.
The softness of the tone can be varied subtly by the depth to which
you press the pedal.
The Sostenuto pedal and Soft pedal can be given functions
other than these. Refer to “Notation Screen” (p. 26) and
“Changing the Pedal Functions (Pedal)” (p. 91).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Playing in a Wonderland of Sound
“Wonderland” allows children to experience a variety of sounds and internal songs with easy operation and
enjoyable animation.
Press the [Wonderland] button.
1.
After the opening screen is displayed, the “Wonderland” screen, like the one below,
appears in the display.
fig.d-wonderland-e.eps_50
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Press the cursor buttons to select the item you want to play, then press the
] button.
2.
[
You can do the following in Wonderland.
Item
How It Is Used
Select a picture of a percussion instrument to hear the sound
of that instrument. Play the keyboard to play the selected
percussion instrument.
Drums
Piano
Alphabet
SFX
Learn how the piano is constructed.
Use the keyboard to become familiar with the alphabet.
Listen to a wide variety of sound effects.
Listen to the internal songs.
Songs
Select a picture of an instrument to hear the sound of that
instrument. Play the keyboard to play the selected
instrument.
Tones
Flash Card
Game
In this game, you play the notes shown on the cards.
In this game, you try to the tone name, chords, and rhythms
that you hear.
Try playing as you view the screen.
3.
4.
When you have finished with Wonderland, press the [Wonderland] button.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Learning the Basics of Reading Music (DoReMi Course)
In the “DoReMi Course,” even those unable to read music can study the basics of reading music and the
keyboard through games and music.
Press the [ (Lesson)] button.
1.
The Menu screen appears.
Press the cursor buttons to select <DoReMi Course>, then press the [
button.
]
2.
The “DoReMi Course” screen appears.
fig.d-doremi-e_50
Press the cursor up and down button to select the item you want to practice,
then press the [ ] button.
3.
You can do the following in DoReMi Course.
Item
Contents
DoReMi
(Pitch Training)
Learn the key and note positions and the note names.
Note and Rest
(Rhythm)
Learn the note and rest lengths.
Fingering Number
Thumb Under
While playing, learn the fingering numbers.
Familiarize yourself with the thumb-under technique for
smooth fingering in performances.
Now try learning how to read the notation, using the buttons as you view the
screen.
4.
5.
When you have finished with DoReMi Course, press the [ ] button in the
“DoReMi Course” screen.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
■ DoReMi (Pitch Training)
fig.d-DoReMi-1-e_50
Remember the key and note positions and the note
names.
Press the [ ] button to start the game.
In this game, questions will appear in the left side of
the screen. Answer the questions by playing the keys.
Pressing the [ ] button in the game screen prompts
a description of the key and note positions and the
note names.
■ Note and Rest (Rhythm)
fig.d-DoReMi-2-e_50
Remember the note and rest lengths.
Press the [ ] button to start the practice.
Play the song while paying attention to the note and
rest lengths.
Selecting <Description> in the Menu screen and
pressing the [ ] button prompts a description of
notes and rests.
■ Fingering Number
fig.d-DoReMi-3-e_50
Memorize the fingerings as you play the song.
Press the [ ] button to start the practice.
Play the song according to the fingering given.
After finishing the practice, you can press the cursor
buttons to check the notes and fingerings in the
notation, one note at a time.
Selecting <Description> in the Menu screen and
pressing the [ ] button prompts a description of
fingers and fingerings.
■ Thumb Under
fig.d-DoReMi-4-e_50
To perform with smooth finger movements,
familiarize yourself with the thumb-under technique.
Press the [ ] button to start the practice.
Play the song while paying attention to the fingering
and how you are crossing over your hands.
After finishing the practice, you can press the cursor
buttons to check the finger movements slowly, one
note at a time.
Selecting <Description> in the Menu screen and
pressing the [ ] button prompts a description of the
thumb-under technique.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Splitting the Keyboard Into Two Sections for Four-Hand
Performances (Twin Piano)
You can divide the keyboard into two separate sections, allowing two people to perform in the same registers.
By dividing the keyboard into two sections, you can use the instrument as though it were two pianos.
Even when playing in tandem, its easy to see whether or not the two players’ performances are matching.
Press the [
(Twin Piano)] button.
1.
The Twin Piano function switches on.
fig.d-TwinPiano-e_50
The following occurs with Twin Piano set to ON.
• The keyboard is divided into two sections which can be played with “Middle C”
placed at the center of each section.
• The right pedal now functions as the damper pedal for the right keyboard section,
and the left pedal functions as the damper pedal for the left keyboard section.
• The same tone (Superior Grd) is sounded by both sections.
• If the Split function or the Dual function was on when you turned Twin Piano on,
the Split function and the Dual function will be turned off.
After you’ve turned on the Twin
Piano function, you can press
the tone buttons to switch
sounds.
• 3D Sound Control, Damper Resonance and Chorus will be off.
Try performing with two people, one person playing on the left side of the
keyboard and one on the right.
2.
You can record performances
played using the Twin Piano
function.
→“Recording a New Song” (p.
70)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Cancelling Twin Piano Function
Use the following procedures to cancel Twin Piano function.
Method 1: Press the [
(Twin Piano)] button.
] button. → p. 50
Method 2: Press the One Touch [
Method 3: Cancel the “Split” function. → p. 58
Method 4: Change the “Pedal” function. → p. 26
■ Taking a Lesson While Playing a Two-Person Game
(Twin Piano Game)
The HPi-7S features an ear training game that makes use of the Twin Piano function.
You can enjoy games such as listening to notes played in the left part of the keyboard
and playing the same notes in the right side, or displaying notes played in the left part
of the keyboard on the screen and playing the same note in the right side, all while
getting real ear training practice.
Press the [ ] button in the “Twin Piano” screen.
1.
2.
The “Twin Piano Game” screen appears.
fig.d-TwinPiano1-e_50
Press the cursor left or right button to select <Listen to Sounds> or <Read
Notations>, then press the [ ] button.
Game
Lesson Format
After listening to the note for a key played by the player using the
left section of the keyboard, the player on the right plays the note
he or she thinks is the same.
* Several seconds after the player on the left poses the question,
the note played appears in the notation to provide a hint.
Listen to
Sounds
When <Read Notations> is
selected, no sounds are played
when the player on the left
presses the keys for the
question.
The player using the left section of the keyboard plays a note to
pose a question. That note is indicated in the notation.
The player on the right looks at the screen and then plays the note
he or she thinks is the same.
* The player on the left should continue holding down the key for
several seconds after presenting the question.
Read
Notations
One person presses a key in the left part of the keyboard to present a
question.
3.
4.
The other person responds by pressing a key in the right part of the
keyboard.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
■ Changing the Way in Which the Sound is Heard
(Twin Piano Mode)
You can choose one of two ways in which the sound will be produced.
NOTE
Press the [Function] button.
1.
If you set Twin Piano mode to
“2,” reverb will no longer be
applied when you turn on Twin
Piano mode.
Press the cursor buttons to select <Twin Piano Mode>, then press the [
button.
]
2.
fig.d-TwinPiano1-e_50
Press the cursor up or down button to change the Twin Piano Mode setting.
3.
NOTE
Setting
Explanation
For some sounds, the sound
may not be split even if you set
Twin Piano mode to “2.”
Notes played in the keyboard’s right zone will be heard more
loudly from the right speaker than from the left speaker.
Conversely, notes played in the keyboard’s left zone will be
heard more loudly from the left speaker than from the right
speaker.
1
Notes played in the keyboard’s right zone will be heard only
from the right speaker. Notes played in the keyboard’s left zone
will be heard only from the left speaker.
2
You can use the Memory
Backup function to store this
setting in internal memory (p.
97).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Playing Songs Using the Lesson Functions (Visual Lesson)
You can enjoy your practices with the HPi-7S’s Lesson function (Visual Lesson).
Play along with the accompaniment, and your score appears in the display showing how well you played. In
addition, in the Check screen you can see the results shown as notation, allowing you to confirm just what you
played.
You can select the course and practice songs to match your current abilities. You can also supplement your stock
of practice songs with additional music files.
At this point, pressing [ ] advances you to the next screen, and pressing [ ] returns
the previous screen to the display.
Starting the Visual Lesson Function
When changing tones, refer to
“Performing with a Variety of
Tones” (p. 51).
When you want to perform with the tone changed, select the tone before starting Visual
Lesson.
Press the [Lesson] button.
1.
2.
The Menu screen appears.
Press the cursor buttons to select <Visual Lesson>, then press the [ ] button.
The “Visual Lesson” screen appears.
fig.d-VisualLesson-e_50
Selecting the Course
Press the cursor left or right button to select the course you want to practice,
then press the [ ] button.
3.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Selecting the Song
Press the cursor buttons to select the song you want to practice.
fig.d-VisualLesson2-e_50
4.
You can audition the sound by pressing the [
(Play/Stop)] button.
You can adjust the tempo by pressing the Tempo [Slow] [Fast] buttons.
You can also play the metronome sound by pressing the [
(Metronome)] button.
Press the [ ] button.
5.
A screen like the one below appears when you select the <Repertoire course>.
fig.VisualLesson-1-1-e
Part
This selects the part to be
practiced.
Setting: Both Hands,
Start Measure
This sets the starting
measure.
Right Hand,
Left Hand
End Measure
This sets the
ending measure.
Tempo
This sets the tempo for
your practice.
Setting: Much Slower,
Slower,
A Little Slower,
Original Tempo
Set the tempo and the part you want to practice, then press the [ ] button.
Playing along with the Song
After reading the message in the screen, press the [ ] button once more.
If you stop playing before the
end of the song, the song
playback stops, and the screen
showing the graded result
appears.
6.
7.
The song accompaniment begins.
Play along with the accompaniment.
When you have finished playing, your score appears in the display.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Checking the Performance
Press the [ ] button.
8.
The results of your performance is shown in the musical notation in the Check screen,
like that below.
fig.d-VisualLesson-2-e
Grayed Out
The proper note was not played.
Pitch (Red)
The pitch was incorrect.
Rhythm (Blue)
? (Green)
A note not in the notation
was played.
The timing of the accent
was off.
Button
How it is Used
You can switch the performance to be checked by pressing
the cursor up or down button. Pressing the cursor down
button when “Ref.” (reference) is selected switches the
performance to “You” (the results of your performance).
Pressing the cursor up button when “You” (the results of your
performance) is selected switches the performance to “Ref.”
(reference).
cursor buttons
You can check each note in the performance, one note at a
time, by pressing the cursor left or right button.
The notation is switched, going back one measure in the
notation each time the button is pressed.
[
[
(Bwd)] button
The notation is switched, advancing one measure in the
notation each time the button is pressed.
(Fwd)] button
(Play/Stop)]
You can use this to play back the performance selected with
the cursor buttons (“Ref.” [reference] or “You” [the results of
your performance]).
[
button
Displaying the Menus
Press the [ ] button.
9.
The following screen appears.
fig.d-VisualLesson5-e_50
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Out the HPi-7S’s Lesson Functions!
Press the cursor buttons to select the menu, then press the [ ] button.
10.
If you want to practice the same song again, select “Try Again.”
If you want to practice another song, select “Select Song.”
If you want to practice with another course, select “Select Course.”
If you are finished with Visual Lesson, select “Exit.”
When the “Repertoire course”
is selected, <Setting> appears
in the menu. If you want to
make settings for the tempo,
part to be played, or other
settings, select this <Setting>.
■ Practicing with Internal Songs and Songs on USB Memory
Not only can you practice the songs prepared for use in Visual Lesson, you can also
NOTE
practice other HPi-7S internal songs and songs saved on USB memory.
You can’t use Visual Lesson
with a music CD or audio file.
When practicing songs saved on USB memory, be sure to have the USB memory
connected to the HPi-7S’s External Memory connector first.
Select “Other Songs” in the “practice song selection” screen, then press the
1.
[
] button.
NOTE
fig.d-VisualLesson6-e_50
Depending on the data size of
the song, it may not play all the
way to the end when using
Visual Lesson. In such cases,
you’ll need to reduce the data
size of the song by using the
functions described in “Editing
Songs” (p. 100). One solution
would be to extract the portion
that you want to practice.
The “song selection” screen appears.
Press the cursor buttons to select the song, then press the [ ] button.
2.
3.
If you have selected the <Repertoire> course, set the tempo and the part you
want to practice, then press the [ ] button.
Play along with the accompaniment.
4.
When you have finished playing, your score appears in the display.
Press the [ ] button to display the results of your performance in the notation.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
You can listen to the internal songs, commercially available music files, songs you have recorded yourself, and
songs saved on USB memory (optional; sold separately).
Listening to the Internal Songs
The HPi-7S features a variety of internal songs. The internal songs are categorized into “Practice,”
“Masterpieces,” “Popular,” and “Kids” genres.
fig.panel-SongSelect-e
You can listen to songs from floppy disk by using a separately sold floppy disk drive. By using a commercially-
available CD drive, you can listen to SMF data or VIMA CD-ROMs (VIMA TUNES) on a CD-ROM, or listen to
music CDs.
NOTE
Selecting the Song
The “External Memory” , “Disk”
, “CD“ or “Music CD“ genres
can be selected only when USB
memory, a floppy disk drive or
CD drive is connected to the
External Memory connector.
In this case, “Disk” is indicated
when a floppy disk drive is
connected; “External Memory”
is indicated when USB memory
is connected; “Music CD” or
“CD“ is indicated when CD
drive is connected.
Press the [
(Song)] button.
1.
The “song selection” screen appears.
fig.SongSelect-e
External Memory/
Disk/Music CD/CD
Selects songs in USB
memory, on floppy disks or
CD.
For details refer to p. 44,
p.47
Song Name
The name of the currently selected song.
Genre
Press the cursor left or
right button to select the
genre.
Selectable songs differ
for each genre.
Chords, fingerings, lyrics,
and audio in songs
containing such data are
displayed here.
In addition, the “Favorites”
genre can be selected only
when you have a song or songs
in the “Favorites.”
Song List
Lyrics
Press the cursor up or
down button to select
the song.
The selection will be
highlighted in black.
Fingering Number
Chord
Audio
While the notation shows the
symbol, the song data is being
loaded.
Genre
Selected
Genre Not
Selected
Press the cursor left or right button to select the song genre.
2.
3.
Press the cursor up or down button to select the song you want to listen to
from the song list.
When the “song selection”
screen is displayed, you can
start and stop playback of
Playing Back
Press the [
(Play/Stop)] button.
songs by pressing the [
button.
]
4.
The [
(Play/Stop)] button’s indicator will light.
The song will begin playing.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
Stopping Playback
Press the [
(Play/Stop)] button.
5.
The [
Playback will stop automatically when it reaches the end of the song.
Press the [ (Reset)] button to return to the beginning of the song.
(Play/Stop)] button’s indicator goes off, and playback of the song stops.
You can check the notes of all the internal songs in the Notation screen.
They also have orchestral accompaniments, so you can play along with the
accompaniment, or adjust the tempo to the desired speed for easier practice.
→ “Playing Along with Songs” (p. 59)
→ “Adjusting the Tempo” (p. 62)
music files saved on external memory (USB memory, floppy disks; separately
available) connected to the External Memory connector.
→ “Registering the Songs You Like (Favorites)” (p. 45)
→ “Internal Song List” (p. 123)
→ “Listening to Music Files or a Song that was Saved on USB Memory” (p.
44)
If a screen like the following is
displayed
If you select a different song after already
having recorded, edited (p. 100), or changed
message appears.
If you want to erase the song, use the
cursor buttons to select <OK>, then press the
[
] button. If you do not want to delete the
song, select <Cancel>, then save the song to
USB memory or to the “Favorites.”
→ “Saving Songs” (p. 80)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
■ Playing Songs Consecutively (All Song Play)
You can play back the internal songs and songs in USB memory continuously.
fig.panel-AllSong-e
Hold down the [
button.
(Song)] button and press the [
(Play/Stop)]
1.
2.
fig.d-AllSongPlay-e_50
Press the cursor up or down button to change the setting.
Setting
Explanation
Random Play
Practice
Songs in all genres are played back in random order.
All internal songs in the selected genre are played back.
All songs registered in the “Favorites” are played back.
Masterpieces
Popular
Kids Song
Favorites
If you want to play back songs
stored to optional external
memory (USB memory, floppy
disks or CD), select <External
Memory>, <Disk>, <CD> or
<Music CD>.
Songs stored to the USB memory, floppy disk or CD
connected to the External Memory connector are played
back.
External Memory
Press the [ ] button.
3.
All songs in the selected genre are played back continuously.
NOTE
When all selected songs have been played, playback will return to the first song and
When playing back all songs
on external memory, you
cannot play back songs
resume.
If no operations are performed for dozens of seconds, <Random Play> will start
automatically.
contained inside folders. If any
songs that you want to play are
inside any folders, move those
songs outside their folders.
Stopping Playback
Press the [
(Play/Stop)] button.
1.
Playback will stop.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
Listening to Music Files or a Song that was Saved on USB Memory
disks connected to the External Memory connector. You can also play the keyboard along with the song playback.
Connect the optional USB memory or floppy disks drive to the External
Memory connector.
1.
For more on connecting USB
memory or floppy disk drives,
If playing back commercially available music files or songs saved on a floppy disk,
insert the floppy disk in the floppy disk drive.
refer to “Connecting USB
Memory” (p. 20) and
“Installing the Floppy Disk
Drive” (p. 20).
Selecting the Song
Press the [
(Song)] button.
2.
3.
Press the cursor left or right button to select <External Memory> , <Disk>,
<CD> or <Music CD> as the genre.
fig.SongSelectSMF-e
Genre
Press the cursor left or right button to
select <External Memory>, <Disk>,
<CD> or <Music CD>.
Song Name
The name of the currently selected
song.
Song List
IThe measure number in the
screen will be highlighted while
the music file is being loaded.
Please wait.
The selection will be highlighted in
black.
Press the cursor up or down button to select the song you want to play back.
4.
Playing Back
Press the [
(Play/Stop)] button.
5.
The song will begin playing.
For more on how to use the
notation screen, refer to p. 26.
Stopping Playback
Press the [
(Play/Stop)] button once more.
6.
To Leave a Folder
When Selecting Songs in Folders
1. Press the cursor buttons to
1. In the “song selection” screen, press the cursor buttons to select the
folder containing the song you want to play back.
select
(Up).
2. Press the [
(Play/
] button.
2. Press the [
(Play/Stop)] or [ ] button.
Stop)] or [
After a moment, a list of songs in the folder is displayed.
3. Press the cursor buttons to select the song you want to play back.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
Registering the Songs You Like (Favorites)
You can register songs you are currently practicing or enjoy playing to “Favorites,” allowing you to select these
songs easily.
fig.panel-RegistFav-e
What are the “Favorites?”
This is the area of memory where you can save copies of performances
recorded with the HPi-7S, songs stored in the USB memory connected to the HPi-
7S’s External Memory connector, and other songs. By registering songs to the
“Favorites,” you can then select the registered songs easily by selecting
“Favorites” as the genre in the “song selection” screen.
Since songs registered to the “Favorites” are not deleted when you turn off the
HPi-7S’s power, you will find it convenient to register the songs you often listen
to here in the “Favorites.”
Press the [
(Song)] button.
1.
NOTE
The “song selection” screen appears.
You cannot register audio files
to the Favorites.
fig.d-SongSelect-e_50
Press the cursor left or right button to select the song genre.
2.
3.
4.
NOTE
Press the cursor up or down button to select the song you want to register.
When you have selected a
song registered to the
“Favorites” genre, holding
Hold down the [
(Song)] button and press the [ ] button.
down the [
(Song)] button
] button
A screen like the one shown below appears.
and pressing the [
fig.d-RegistFavorites-e_50
displays the “song deletion”
screen.
If you do not want to delete the
song, use the cursor buttons to
select <Cancel> and then press
the [
] button.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
NOTE
Never turn off the power while
the display indicates
“Executing....”
Press the cursor right button to select <OK>, then press the [ ] button.
5.
The selected song is registered to “Favorites.”
Now you can select the registered song by selecting “Favorites” for the genre in the
“Song Selection” screen.
NOTE
You can register up to a
■ Removing Songs from Favorites
maximum of 200 songs in the
“Favorites.” However, if there is
insufficient memory remaining,
the message “Error: 11” (p.
116) will appear even with
fewer than 200 songs, and you
will not be able to continue
registering more songs.
Press the [
(Song)] button.
1.
2.
The “song selection” screen appears.
In the “song selection” screen, press the cursor left or right button to select
<Favorites>.
fig.d-SongSelectFav-e_50
NOTE
You cannot select “Favorites”
as the song genre without any
songs being registered to the
“Favorites.”
Press the cursor up or down button to select the song you want to remove
from “Favorites.”
3.
4.
Hold down the [
(Song)] button and press the [ ] button.
A screen like the one shown below appears.
fig.d-DelFavoriteSong-e_50
NOTE
Never turn off the power while
the display indicates
“Executing....”
Press the cursor right button to select <OK>, then press the [ ] button.
5.
The selected song is removed from the “Favorites.”
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
Playing a Music CD or Audio File
You can connect a commercially available CD drive and play back a music CD. You can also play back audio
files from USB memory.
fig.panel-RegistFav-e
Connect your separately purchased USB memory or commercially available
CD drive to the external memory connector.
1.
For more on connecting USB
memory, refer to “Connecting
USB Memory” (p. 20).
If you want to play back a music CD, insert the CD in your CD drive.
Selecting the Song
Press the [
(Song)] button.
2.
Use the cursor left or right button to select either <External memory> or
<Music CD> as the Genre.
3.
fig.SongSelectSMF-e
Genre
Press the cursor left or right button to
select <External Memory> or <Music
CD>.
Song Name
The name of the currently selected
song.
Song List
The selection will be highlighted in
black.
Press the cursor up or down button to select the song you want to play back.
4.
To Leave a Folder
When Selecting Songs in Folders
1. Press the cursor buttons to
1. In the “song selection” screen, press the cursor buttons to select the
folder containing the song you want to play back.
select
(Up).
2. Press the [
(Play/
] button.
2. Press the [
(Play/Stop)] or [ ] button.
Stop)] or [
After a moment, a list of songs in the folder is displayed.
3. Press the cursor buttons to select the song you want to play back.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
Playing Back
NOTE
This instrument is incapable of
displaying the notation for the
songs on a music CD.
Press the [
(Play/Stop)] button.
4.
The song will begin playing.
Stopping Playback
Press the [
(Play/Stop)] button once more.
5.
NOTE
You cannot register audio files
to the Favorites.
About Audio Files
Audio files of the following format can be played
• File extension is “.wav”
• 16-bit linear
• 44.1 kHz sampling rate
• 3D Sound Control (p. 89)
• Reverb (p. 54)
• Tempo change (p. 62)
• Save to internal memory (p. 80)
• Recording (p. 69)
• Play back (mute) individual parts (p. 95)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Songs
■ Adjusting the Volume of an Audio File or Music CD
You can adjust the playback volume of an audio file or music CD.
Press the [Function] button.
1.
The “Functions” screen appears.
Press the cursor buttons to select <Audio Volume>, then press the [
button.
]
2.
Use the cursor buttons to adjust the volume of the audio file or Music CD.
3.
Setting
0–127
■ Reducing the Playback Volume of Sounds in the Center
(Center Cancel)
When playing a music CD or audio file, you can reduce the playback volume of
sounds that are located in the center (such as vocals or melody instruments).
NOTE
For some songs, the sounds in
the center may not be entirely
eliminated.
Play back the audio file or music CD (p. 47).
1.
NOTE
Press the track [4/Right] button so its indication is turned off.
2.
You may find that using Center
Cancel reduces the tone quality
of some songs.
The volume of the melody or vocal will be reduced.
Turning off the center cancel function
NOTE
The Center Cancel setting will
be cancelled when you select
another song.
Press the track [4/Right] button so it’s lit.
1.
NOTE
If you use Center Cancel when
3D Sound Control (p. 89) is on,
3D Sound Control will be
turned off.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
Playing the Keyboard Like a Piano (One Touch Piano)
You can create the optimal settings for a piano performance with the press of a single button.
Press the One Touch [
] button.
1.
The Tone [Piano] button’s indicator will light.
The notation for the currently
selected song is displayed in
the screen.
A screen stating that the optimal settings for piano performances have been selected
is displayed for several seconds, followed by a “Notation screen” like the following.
fig.d-OTP-e.eps
When the one touch piano
screen is displayed, you can
press the [
] button to access
the Piano Designer screen (p.
p. 86).
When you press the One Touch [
] button, the HPi-7S will switch to the
following settings, regardless of the current panel settings.
• If the keyboard has been split into upper and lower sections (Split
Performance → p. 57), the keyboard returns to a single section. When the
sounds are layered (Dual Performance → p. 56), the layered sound is
cancelled, and sounds are played using the piano tone.
Since this instrument faithfully
action and response, keys
played in the top one-and-one-
half-octave range continue to
resonate, regardless of the
damper pedal action, and the
tone in this range is audibly
different. The Transpose setting
(p. 68) can also be used to
change the range that is
unaffected by the damper
pedal.
• Pedal functions are as follows: the left pedal functions as the soft pedal, the
center pedal functions as a sostenuto pedal, and the right pedal functions as
a damper pedal.
If any other functions are assigned to the left and center pedals, these
functions are cancelled.
• The “Superior Grd” sound is automatically selected.
• Reverb depth is set to “4.”
• The chorus function is turned off.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
Performing with a Variety of Tones
The HPi-7S contains 610 and more different tones.
The tones are organized into six tone groups, which are assigned to the Tone buttons.
Tone Group:
Piano, E. Piano, Organ, Strings, Voice, Others
Press any one of the Tone buttons to select a tone group.
1.
2.
When you press a Tone button, the button’s indicator will light. The “tone selection”
screen appears.
Press the cursor buttons to select the tone to perform with.
fig.
Tone List
The background of the currently selected tone turns orange.
Tone Group
The “tone selection” screen consists of multiple pages. When you press the cursor
buttons to switch tones, the screen switches automatically.
The next time you press this Tone button, the tone you finalized here will be heard.
→ “Tone List” (p. 117)
Tones indicated by “
recommended.
” is called an “EX Tone.” These tones are especially
Sounds for which “
Sounds for which a red
” is indicated are 88-key multi-sampled piano sounds.
indication is shown will additionally
produce a key-off sound. What “Key Off Sound” does is recreate the tonal
changes produced when the fingers are released from the keys.
When the “tone selection” screen is displayed, you can listen to a phrase that
uses the selected tone by pressing the [
end and then stops automatically. Pressing the [
still playing stops the phrase.
] button. The phrase is played to the
] button while the phrase is
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
Playing Percussion Instruments or Sound Effects
You can use the keyboard to play percussion sounds or effects like sirens and animal sounds.
Press the Tone [Others] button.
1.
Use the cursor buttons to select a rhythm set such as <DR STANDARD> or
<SOUND EFFECT> (SFX set).
2.
Drum set names are indicated by initial “DR.”
Each note of the keyboard will play a different sound.
fig.d-ToneDrum-e
The combination of sounds
assigned to the keyboard varies
according to the drum set. For
the sounds that are assigned to
each key of a drum set or
sound effect set, refer to
“Drum/SFX Set List” (p. 119).
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
Adjusting the Keyboard Touch (Key Touch)
You can adjust the touch (playing feel) of the keyboard.
You can adjust the keyboard touch as appropriate for the playing strength of the person who is performing.
Press the [Key Touch] button.
1.
Each time you press the [Key Touch] button, the button’s indicator changes color while
the touch is switched.
fig.d-keytouch-e
While the “Key Touch” screen
is being displayed, you can
also change the key touch by
pressing the cursor up or down
button.
Indicator
Setting
Fixed
Explanation
You can specify the loudness at
which each note will sound
when the Fixed keyboard touch
is selected. Refer to
“Changing” the Velocity When
the Key Touch is Set to “Off”(p.
87).
Lit
Sounds at a fixed volume, regardless of your
keyboard playing strength.
(Orange)
Lit (Green)
Super Light This setting produces the lightest keyboard touch.
Fortissimo ( ) can be produced by playing less
strongly than usual, making the keyboard feel
lighter. This setting makes it easier for children,
whose hands have less strength.
Lit (Green)
Light
This allows you to play using the most natural touch.
This setting is closest to the response of an acoustic
piano.
Off
Medium
Heavy
Fortissimo ( ) cannot be produced unless you play
more strongly than usual, making the keyboard feel
heavier. This setting allows you to add more
expression when playing dynamically.
touch sensitivity in the Piano
Designer screen (p. 86).
You can make even finer
adjustments to the keyboard
touch. Please refer to “Making
Fine Adjustments to the
Keyboard Touch Sensitivity” (p.
p. 87).
Lit
(Red)
Lit
(Red)
Super
Heavy
This setting produces the heaviest keyboard touch.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
Applying Effects to the Sound
NOTE
It is not possible to memorize
the reverb effect setting for
each tone.
■ Adding Reverberation to the Sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it
sound as though you were performing in a concert hall.
fig.d-Effect2-e
Press the [Reverb] button.
1.
You can change the amount of
reverb applied by holding
down the [Reverb] button and
pressing the cursor up or down
button.
The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [Reverb] button, getting its indicator to go dark.
The depth of the reverb effect can be adjusted. Refer to “Adjusting the Depth of the
Effects (Effect)” (p. 89).
■ Adding Richness to the Sound (Chorus)
The chorus setting can be
Turning off the power restores
the original settings. You can
also use the Memory Backup
function to save the chorus
settings even when the power is
turned off.
By applying the chorus effect you can make the sound richer and more spacious.
You can turn the chorus effect on and off for each tone individually.
Press the [Chorus] button.
1.
The button’s indicator will light, and a chorus effect will be applied to the sound.
To cancel the chorus effect, press the [Chorus] button, getting its indicator to go dark.
The depth of the chorus effect can be adjusted. Refer to “Adjusting the Depth of
the Effects (Effect)” (p. 89).
You can change the amount of
chorus applied by holding
down the [Chorus] button and
pressing the cursor up or down
button.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
■ Adjusting the Brightness of the Sound (Brilliance)
You can adjust the brightness of the sound.
Turn the [Brilliance] knob to adjust the brightness of the sound.
1.
Turning the knob toward the right will make the sound brighter, and turning it toward
the left will make the sound more mellow.
■ Adding Liveliness to the Sound (Dynamics Sound Control)
You can add liveliness to the sound to give it superb clarity and distinctness.
Press the [Function] button.
1.
You can use the Memory
Backup function to store this
setting in internal memory (p.
97).
The Functions screen appears.
Press the cursor buttons to select <Tone Control>, then press the [ ] button.
fig.d-SoundAdjust-e
2.
NOTE
For some sounds, this may
cause distortion.
Press the cursor up or down button to change the dynamics setting.
3.
Setting
Off
Explanation
NOTE
The Dynamics sound control function is switched off.
Creates a sound with boosted bass and treble.
Creates a clear distinct sound in lower frequency.
Creates a sound with boosted bass.
Dynamics does not affect the
sound from the Input jack or the
sound of external devices
connected to the MIDI Out
connector.
Sharp
Clear
Power
Press the [ ] button to close the “Tone Control” screen.
4.
NOTE
If you use Dynamics Sound
Control when 3D Sound
Control (p. 89) is on, 3D Sound
Control will be turned off.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
Playing Two Sounds Layered Together (Dual)
Simultaneously playing two sounds when one key is pressed is called “Dual Performance.”
Simultaneously press two of the Tone buttons.
1.
Both of the button indicators will light. Of the two buttons, the sound of the left button
will be “Tone 1,” and the sound of the right button will be “Tone 2.”
NOTE
You can’t use Dual Performance
if the Twin Piano function is on.
Tone 1
Tone 2
Displays the tone name
for the left Tone button
that is selected.
Displays the tone name
for the right Tone button
that is selected.
Dual Balance
Displays the volume
ratio of the two selected
tones.
Changing the Tone
Press the cursor buttons to select “Tone 1” or “Tone 2.”
1.
2.
Press the [-] [+] button to select the tone.
When the tone names of “Tone 1” or “Tone 2” are highlighted, you can press the
cursor buttons to select tones within the same tone group.
Adjusting the Volume Balance (Dual Balance)
You can change the volume balance between the two layered sounds in Dual
performance.
Press the cursor buttons to select “Dual Balance.”
1.
Press the [-] [+] button to adjust the dual balance.
2.
The volume balance changes.
Cancelling Dual Performance
Press any tone button.
1.
Now you’ll hear only the sound of the button you pressed.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
Playing Different Sounds in the Right and Left Hand (Split)
Dividing the keyboard into right-hand and left-hand areas, then playing different sounds in each is called “Split
Performance.” The boundary key is called the “Split Point.”
fig.splitpoint-e
Split Point (set to F 3, when the power is turned on.)
…
A0 B0 C1 D1 E1 F1 G1 A1 B1 C2
C3
C4
C5
B7 C8
Left-hand Tone
Right-hand Tone
The split point key is included in the left-hand keyboard area.
Press the [Split] button.
NOTE
1.
You can’t use Split performance
if the Twin Piano function is on.
Split performance is enabled. The tone selected before the performance is set as the
“Right-hand Tone”, the “Left-hand Tone” is selected automatically.
The following screen appears.
Left-hand Tone
Displays the name of
the tone selected for
the left-hand
Right-hand Tone
Displays the name of the
tone selected for the
right-hand keyboard
area.
keyboard area.
Split Point
Displays the key
between the right-hand
and left-hand keyboard
areas.
When switching tone groups, if
<Right-hand Tone> or <Left-
hand Tone> is selected, press a
tone button.
You can use the cursor buttons
to select tones within the
selected tone group.
After changing the tone,
pressing the [ ] button returns
the “Split” screen to the
display.
Changing Tones
Press the cursor buttons to select <Left-hand Tone> or <Right-hand Tone>.
1.
2.
Press the [-] [+] button to select the tone.
When the tone names of <Left-hand Tone> or <Right-hand Tone> are highlighted, you
can press the cursor buttons to select tones within the same tone group.
Changing the Split Point
Press the cursor buttons to select the keyboard layout (split point).
1.
2.
Press the [-] [+] or down button.
The Split Point is changed.
This is set to “F#3” when the
power is turned on.
You can change the split point within the range of B1 through B6.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Variety to Your Performances
Cancelling the Split Performance
Use the following procedure to cancel the split.
Press the [Split] button, getting its indicator to go dark
1.
Enabling Split Performance When Dual Performance is Already
Enabled
By enabling Split Performance while the HPi-7S is already in Dual Performance mode,
you can then split the keyboard into left and right sections, while also having two tones
play in the right side.
Simultaneously press two tone buttons to switch to Dual Performance.
1.
Press the [Split] button.
2.
Split is now enabled.
In addition, Dual performance is enabled in the right-hand side of the keyboard.
Tone 1
Left-hand Tone
Displays the name of Tone 1
of the Dual performance in
the right-hand area.
Displays the tone name
in the left-hand area.
Split Point
Displays the boundary
key.
Tone 2
Dual Balance
Displays the name of Tone 2
of the Dual performance in
the right-hand area.
This shows the relative balance in
volume between the two tones
selected for the right-hand side.
To Switch From Split to Dual Performance
Set the HPi-7S to Split Performance (p. 57).
1.
After pressing the cursor buttons to select the right-hand tone, press two tone
buttons.
2.
Split Performance is enabled. In addition, Dual Performance is enabled in the right-
hand part.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Playing Along with Songs
You can play along with a music data stored internally in the HPi-7S, on USB memory or on CD--ROM.
You can mute the sound of the part you want to play, and play that part yourself. This makes it easy to practice
hands separately. For example, you can follow along with your right hand while you listen to that same right-
hand part be played, or you can practice the right-hand part while the left-hand part plays.
You can check the notes in internal songs and songs stored to USB memory in the Notation screen.
fig.panel-Rec5trk-e
A music file for piano lessons may be assigned to the five Track buttons as shown
For more on music files, refer to
Can Use” (p. 125).
below.
fig.5trackButton-e
If a single Track button includes
more than one instrument and
you want to mute just one of
those instruments, take a look at
“Preventing a Part from Playing
(Mute)” (p. 95).
Drums/
SFX
Accompaniment Left-hand Right-hand
Part Part Part
to as “mute.”
When a single Part is not
played, it is called “Minus
One.” Using Minus One, you
can mute out a particular
instrument and play the part
yourself.
Preparing to Play
Select the song you want to play.
1.
→ “Listening to the Internal Songs” (p. 41)
→ “Listening to Music Files or a Song that was Saved on USB Memory” (p. 44)
Press the track button for the performance part you want to practice; the
button’s indicator goes off.
When playing back SMF music
files for Roland Piano Digital
button do not correctly control
the left/right-hand
2.
The indicators of the buttons you pressed will go dark, and the selected track will not
be heard.
To cancel muting, press the same track button once again to make the indicator light.
performances, please change
the “Track Assign” settings.
Please refer to “Changing the
Parts Assigned to the Track
Buttons During SMF Playback
(Track Assign)” (p. 93).
Press the [
(Notation)] button.
3.
The Notation screen appears. While the screen shows the
is being loaded.
symbol, the song data
Playing back
Press the [
(Play/Stop)] button.
4.
You can press the Tempo
[Slow] [Fast] buttons to adjust
the tempo to your liking.
The button’s indicator will light.
The song will begin playing. Go ahead and play along with the song.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Stopping the song
Press the [
(Play/Stop)] button.
5.
The indicator for the [
stops.
Press the [ (Reset)] button to return to the beginning of the song.
(Play/Stop)] button goes out, and playback of the song
If a screen like the following is displayed
having recorded, edited (p. 100), or changed
the settings (p. 95) for a song, the following
message appears. If you want to erase the
song, select <OK>. If you do not want to delete
the song, select <Cancel>, then save the song
to USB Memory or to the “Favorites.”
→ “Saving Songs” (p. 80)
■ Lowering the Volume of a Part You’re Learning
(Melody Guide)
When playing back an internal song or SMF music file, you can have the part you
intend to perform be played at a reduced volume.
Until you’ve learned a part you want to play, you can have that part be played at a
reduced volume while you practice it. Once you’ve learned the part, you can press the
track button to mute it completely, and play it yourself.
Hold down the track button until the Mute Volume screen appears.
1.
NOTE
The Melody Guide function
does not work for a music CD
or audio file.
Press the [-] [+] buttons to adjust the volume of the part.
2.
The volume of the part can be adjusted within the 0-80 range.
NOTE
When you turn off the power,
the part volume will return to
“0.”
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Changing the Volume Balance of the Accompaniment and
Keyboard (Balance)
You can change the volume balance between the sounds from the song being played and the sounds from keyboard.
Press the [Function] button.
1.
2.
The Functions screen appears.
Press the cursor buttons to select <Balance>, then press the [ ] button.
fig.d-Balance-e_50
Press the cursor left or right button to adjust he volume balance between
accompaniment and keyboard.
3.
Setting
Explanation
Pressing the cursor right button sets the
<Keyboard> side
The volume of the song and
accompaniment sounds decreases.
Pressing the cursor left button sets the
<Accomp> side
The volume of the keyboard sounds
decreases.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Adjusting the Tempo
This changes the song tempo.
If songs seem difficult to play at their original speed, you may find it helpful to first practice with the tempo
slowed down. Then, after becoming more familiar with the song, you can practice it at a gradually faster tempo.
Changing the tempo has no effect on the pitch of the notes. Additionally you can change the tempo even when
the song is in progress.
fig.panel-Tempo-e
Press the Tempo [Slow] [Fast] buttons to adjust the tempo.
NOTE
1.
You cannot change the tempos
for Audio files and Music CDs.
The tempo can be adjusted in a range of
=10–500.
■ Playing Back at a Fixed Tempo (Tempo Mute)
The tempo in some songs may change, speeding up or slowing down, when the song
is in progress.
If a song has tempo changes, it helps to practice the song first at a steady tempo.
Overriding tempo changes is called “Tempo Mute.”
You can also enable Tempo
Mute by holding down
Press the [
(Metronome)] button.
1.
2.
[
(Play/Stop)] button and
The “Metronome” screen appears.
pressing either the Tempo
[Slow] or [Fast] button.
Press the [ ] button.
Tempo mute is enabled.
When tempo mute is in effect, the tempo display appears in reverse video.
fig.d-TempoMute-e_50
You can also cancel Tempo
Mute when the function is
enabled by holding down
When you play back the song, it will play at a constant tempo.
To cancel Tempo Mute, press the [
(Metronome)] button again to display the
[
(Play/Stop)] button and
“Metronome” screen, then press the [ ] button.
pressing either the Tempo
[Slow] or [Fast] button.
Tempo Mute will also be cancelled when you select a different song.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Using the Metronome
The HPi-7S contains a versatile metronome function.
While a song is playing, the metronome will sound at the corresponding tempo and time signature (Beat).
fig.panel-Metronome-e
Press the [
(Metronome)] button.
1.
You can set Tempo Mute by
pressing the [ ] button when
The button’s indicator will blink according to the time signature (Beat), and the
metronome will sound.
the “Metronome” screen is
displayed (p. 62).
To stop the metronome, press the [
(Metronome)] button, getting its indicator to go
dark.
fig.Metronome-e
Sound
Specifies the metronome sound.
Pattern
Specifies the timing interval of the
metronome’s weak beats.
Beat LED
Sets the [
(Metronome)] button’s
indicator on or off.
Beat
Sets the beat.
Volume
Sets the metronome volume.
Press the cursor left or right button to select the setting you want to make.
2.
Item
Setting
Choosing
sets the volume to the lowest level, and choosing
to silence the metronome sound.
Volume
sets it to the highest level.
Choosing
2/2, 0/4 (Only weak beats will be sounded), 2/4, 3/4, 4/4, 5/4,
6/4, 7/4, 3/8, 6/8, 9/8, 12/8
* It is not possible to change the “Beat” setting while a song is
playing.
Beat
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Item
Setting
Click,
Electronic,
Voice (Japanese) (“1,” “2,” “3” in Japanese),
Voice (English) (“1,” “2,” “3” in English),
Sound
Animal,
Wood Block,
Triangle & Castanets,
Hand Claps
,
(dotted half note),
(dotted quarter note),
(dotted eighth note),
(sixteenth note),
(half note),
(quarter note),
(eighth note),
Pattern
Double (note added to back beat of the first beat),
Triple (added notes sound the first beat as a triplet),
Shuffle (notes added to create a shuffle)
On (The [
beat.), Off (Dark)
(Metronome)] button’s indicator flashes in time with the
Beat LED
Press the cursor up or down button to change the value.
3.
Adding a Count to Assist Your Timing
“Count-in” means to sound a count before song playback begins.
“Countdown” means to sound a count after the end of the song introduction (before you begin playing the keyboard).
If you will be playing along with a song, sounding a count will make it easier to match the timing of your
performance to the song.
fig.panel-CountMark-e
Press the [Count/Marker] button.
1.
The “Count” screen appears. The “Count” screen has two pages.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
fig.d-Count-e_50
Press the cursor left or right button to select the setting you want to make.
2.
Item
Setting
Count In (add a count before the
performance), Countdown (add a count
Specifies what type of count will
be added.
Count Mode
only before you begin playing), Count In/
down (add both a count-in and a
countdown)
Countdown
Sound
Specifies the count-down sound.
Voice (Japanese), Voice (English)
Left & Right Track (Right-hand and left-
hand parts of a piano song), Left Track
(Left-hand part of a piano song), Right
Track (Right-hand part of a piano song),
Part 1–16
Specifies the track or part that
will determine the beginning of
the performance when adding a
countdown.
Countdown
Track
Count In
Sound
Voice (Japanese), Voice (English),
Wood Block, Triangle & Castanets,
Hand Clap, Animal
Specifies the count-in sound.
Count In
Measure
Specifies the length (number of
measures) of the count-in.
1, 2
When <Repeat> is turned on in
the “Marker” screen (p. 66), this
specifies whether the count-in
will sound each time the range
between the markers is
Count In
Repeat
First time, Each time
repeated, or only the first time.
Press the cursor up or down button to change the value.
3.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Assigning Markers to a Song for Repeated Practice
You can add markers within a song so that you can move to a marked measure, or play back repeatedly
between two markers.
fig.panel-Repeat-e
Before you begin, select the song in which you want to assign markers (p. 41, p. 44).
Accessing the Marker Screen
NOTE
You cannot place markers in
audio files and in Music CDs.
Press the [Count/Marker] button to display the “Count” screen.
1.
2.
Press the [ ] button.
The “Marker” screen appears.
fig.Marker-e
Marker A
Indicates the measure number at
which marker A was assigned.
Marker B
Indicates the measure number
at which marker B was
assigned.
Repeat
If this is “On,” playback will
repeat between markers.
NOTE
It is not possible to assign
Moving to the Location at which You Want to Assign a Marker
Use the [
you want to assign a marker.
(Bwd)] [
(Fwd)] buttons to move to the measure at which
3.
Markers can also be assigned
in units of beats rather than
measures. Refer to “Assigning a
Marker in the Middle of a
Assigning a Marker
Press the cursor left or right button to add a marker.
4.
Measure (Resolution)” (p. 67).
Press the cursor left button to set Marker A; press the cursor right button to set Marker B.
The screen will indicate the number of the measure at which the marker was assigned.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Moving an Assigned Marker
If you use Repeat Playback
without assigning marker A or B
The entire selected song will be
played back repeatedly.
After adding markers to a song, you can then move to the location where Marker A is
set by holding down the cursor left button and pressing either the
(Bwd)] or [ (Fwd)] button.
To adjust the location of marker B, hold down the cursor right button and press the
(Bwd)] or [ (Fwd) button.
[
If you use Repeat Playback when
only marker A is assigned
The song will play back
repeatedly from marker A to the
end of the song.
[
Moving to the Location of an Assigned Marker
After assigning a marker in the song, press either cursor left or right button to move
(jump) to the location of the marker.
If you use Repeat Playback when
only marker B is assigned
The song will play back repeated
from the beginning of the song to
marker B.
Playing Repeatedly between Markers
After assigning both markers A and B, press the cursor down button to turn <Repeat>
to “On.”
When you press the [
markers.
(Play/Stop)] button, playback will repeat between the
If <Repeat> in the “Marker”
screen is turned “On,” you can
Deleting a Marker You’ve Assigned
Hold down the [ ] button, and press the cursor left button to delete marker A, or press
the cursor right button to delete marker B.
press the [
(Notation)]
button to display the Notation
screen and play back
repeatedly. Anything you want
to do that involves markers,
including moving to a particular
marker, is accomplished within
the “Marker” screen.
■ Assigning a Marker in the Middle of a Measure (Resolution)
A marker can be assigned in the middle (at the beginning of a beat) of a measure.
Press the [Count/Marker] button to display the “Count” screen, then press the
1.
[
] button.
Press the [ ] button once more to access the “Resolution” screen.
fig.d-MarkerReso-e_50
2.
Press the cursor up or down button to change the setting.
Setting
3.
Measure
Beat
Markers will be assigned to the beginning of a measure.
Markers will be assigned to the beginning of a beat.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing
Changing the Key of the Keyboard or Song Playback (Transpose)
By using the “Transpose” function, you can transpose your performance without changing the notes you play.
For example, if a song is in a difficult key with numerous sharps ( ) or flats ( ), you can use this function to
play it in an easier key.
You can also use this function to play back a song in a different key.
When accompanying a vocalist, you can easily transpose the key to a range that is comfortable for the singer,
while still playing the notes as written (i.e., with the same fingering positions).
Press the [Transpose] button.
1.
NOTE
The “Transpose” screen appears.
If you’ve selected a song from a
fig.d-Transpose-e_50
music CD or an audio file,
using Transpose function may
affect the tonal character.
The Transpose icon
appears in the Notation screen
while the Transpose function is
on.
The available transposition range varies with the type of song data used.
Item
Setting
Keyboard
Transpose the keys played by the keyboard.
SMF Music Files
-6–0–5
NOTE
-24–0–24
If you’ve selected a sing from a
music CD on an audio files and
used Transpose when 3D
Sound Control (p. 89) is on, 3D
Sound Control will be turned
off.
Song
Transpose the song playback.
Music CDs/
Audio Files
-6–0–5
Press the [ ] button to switch the link on or off.
2.
When set to Link <On>, the values for the keyboard and the song data are the same.
When set to Link <Off>, the values for the keyboard and the song data can be set
separately. To cancel the transposition, set Transpose to “0.”
The transposition setting returns to “0,” when you choose another song.
For example, if you want the E pitch to sound when you press the C key, set the
“Keyboard” transpose setting to “4.”
fig.trans-e
If you play C E G
It will sound E G#
B
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
The HPi-7S lets you record your own performances.
additional parts.
The following types of recording can be done using the HPi-7S.
Recording just your own keyboard
→ “Recording a New Song” (p. 70)
performance
Record along with an internal song or
song saved on USB Memory
(p. 73)
Re-recording
→ “Re-recording” (p. 75)
→ “Multitrack Recording on Five
Recording to the Track Buttons
Tracks” (p. 77)
→ “Recording and Playing Back
Performances of Specific
Multitrack recording on 16 tracks
Instruments (16 Track)” (p. 94)
Memo
Songs you record are discarded if you select another song, or turn off the power
of the HPi-7S. Save important performances to the “Favorites” or to USB
Memory (optional), floppy disks (optional).
Refer to “Saving Songs” (p. 80).
If a screen like the following is displayed
If you record a new song after already having
recorded, edited (p. 100), or changed the
settings (p. 95) for a song, the following
message appears.
If you want to erase the song, use the
cursor buttons to select <OK>, then press the
[
] button. If you do not want to delete the
song, use the cursor buttons to select <Cancel>
and press the [ ] button, then save the song to
USB Memory or to the “Favorites.”
→ “Saving Songs” (p. 80)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
Recording a New Song
Here’s how to record just your own keyboard performance without using an internal song.
fig.panel-RecNew-e
Making the Recording Settings (Choosing “New Song”)
Press the [
fig.Rec-NewSong-e
(Song)] button.
1.
New Song
New song to record
Press the cursor up button one or more times to return to the first song, then
press the cursor up button once more to select <New Song>.
2.
settings, then when you press the cursor up or down button, the message “OK to delete
The notation will appear when you press the [
• You can change the tone used in recording.
• You can change the tempo and set the beat for the song.
→“Adjusting the Tempo” (p. 62)
→Changing the beat for the song (p. 63)
• You can record while the metronome sound.
In this case, the metronome sound is not recorded.
→“Using the Metronome” (p. 63)
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
Press the [ (Rec)] button.
3.
The indicators of all Track buttons will blink, and the HPi-7S enters recording-standby mode.
To cancel recording, press the [ (Rec)] button once more and watch the indicator goes out.
When pressing the [
(Rec)]
button to display “Exit/New
Song/Add On,” press the
cursor buttons to select <New
Starting the Recording
Song> and then press the [
button. This bypasses Steps 1
]
Press the [
(Play/Stop)] button.
4.
and 2.
The count is played, and then recording begins.
fig.d-Rec-NewSong-e_50
Note that recording will also begin as soon as you play anything on the keyboard,
even if you do not press the [
(Play/Stop)] button.
In this case, no count will be heard.
Once recording begins, the [
indicators will light.
(Play/Stop)] button and the [ (Rec)] button
Go ahead and perform on the keyboard.
NOTE
Stopping the Recording
Be aware that if you select
<New Song>, the currently
selected song will disappear.
Press the [
(Play/Stop)] button.
5.
Recording will stop, and the [
indicators will go out.
(Play/Stop)] button and the [ (Rec)] button
Playing Back the Recorded Performance
NOTE
deleted when you turn off the
power to the HPi-7S. If you do
not want a recorded
Press the [
(Reset)] button, and then press the [
(Play/Stop)] button.
6.
You can listen the recorded performance.
To stop the playback, press the [
(Play/Stop)] button once again.
performance to be deleted,
save the performance to
external memory (USB Memory
or Floppy disk) or to the
“Favorites”(p. 72, p. 80).
Track Button Assignments for the Recorded Performance
When you record only a keyboard performance, the performance will be
assigned to the track buttons as follows.
Normal performance
The performance is recorded to the [1/User]
(playing a single sound
button.
from the entire keyboard)
button.
Dual performance → p. 56
If you have not saved the
performance you recorded, you
won’t be able to play back
another song. You’ll have to
erase (p. 76) or save (p. 72, p.
80) the performance before
playing back another song.
The left-hand performance is recorded to the
[3/Left] button, and the right-hand
performance to the [4/Right] button.
[3/Left] button, and the right-hand dual
performance to the [4/Right] button.
Dual performance and Split
performance → p. 58
The performance on the left side is recorded to
the [3/Left] button, and the performance on the
right side is recorded to the [4/Right] button.
Twin Piano performance
→ p. 34
Drum set or sound effect
performance → p. 52
The performance is recorded to the [R/Rhythm]
button.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
You can save the performances you have recorded to the “Favorites.”
If you turn off the power of the HPi-7S after recording a song without saving the recording first, the recorded
song is deleted. Songs saved to the “Favorites” are not deleted even when the power is turned off, so be sure
that any song that you don’t want to lose is saved to the “Favorites.”
Record the performance (p. 70, p. 73, p. 77).
1.
Press the [
(Song)] button to open the “song selection” screen.
2.
3.
NOTE
Hold down the [
(Song)] button and press the [ ] button.
When you have selected a
song registered to the
“Favorites” genre, holding
The following screen appears.
fig.d-RegistFavorites-e_50
down the [
(Song)] button
and pressing the [
] button
displays the “song deletion”
screen.
If you do not want to delete the
song, use the cursor buttons to
select <Cancel> and then press
the [
] button.
Press the cursor right button to select <OK>, then press the [ ] button.
4.
A screen like the one shown below appears.
You can change the name of the recorded song in this screen.
fig.RenameSong2-1-e
Character to be changed
The selected character is shown with a
black background.
You can save recorded songs
to USB Memory (p. 80).
In addition, you can copy
songs saved in the “Favorites”
to USB Memory (p. 84).
Characters that can be input:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
Space !"#$%&'()*+,-./0123456789:;<=>?@
If you do not want to change the song name, go to Step 6.
Press the cursor left or right button to select the character you want to
change, then press the cursor up or down button to change the character.
5.
6.
After changing the name, press the [ ] button.
The song, with the name changed, is saved to the “Favorites.”
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
Recording Along with a Song
Try recording along with internal songs and songs on USB Memory.
fig.panel-Rec5trk-e
If you select a track button and
then record, the sound of the
selected track button will not be
heard during recording.
Settings for Performances
Press the [
(Song)] button to select the song you want to play.
1.
→ “Listening to the Internal Songs” (p. 41)
NOTE
→ “Listening to Music Files or a Song that was Saved on USB Memory” (p. 44)
You can’t record along with an
audio file or Music CD.
Press the [
(Notation)] button to display the notation screen.
2.
You can change the tone used in performances and change the tempo at which songs
are played back. You can also play the metronome sound while recording.
NOTE
While the measure number is
highlighted, the notation screen
is being generated. When the
highlighted number returns to
normal, please try the
Settings for Recording
Press the [ (Rec)] button.
3.
A screen like the one shown below appears.
operation again.
fig.Rec-OverRec1-e
The selected setting turns
orange.
NOTE
the song you selected. You can
Performing with a Variety of
Tones → p. 51
Press the cursor left or right button to select <Add On>, then press the [
button.
]
4.
With this setting, you can record while listening to the selected song.
Using the Metronome → p. 63
fig.d-Rec-OverRec2-e_50
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
Selecting the Track to Record
Press the track button for the track that you want to record (i.e., the track that
you want to play yourself).
5.
Only drum sets or SFX set are
recorded to the [R/Rhythm]
button.
The indicator of the button you pressed will blink, and the HPi-7S enters recording-
standby mode.
Since in this example we will record the right-hand part performance, press the [4/
Right] button to make the button’s indicator blink.
To cancel recording, press the [ (Rec)] button once more and watch the indicator
goes out.
Starting the Recording
Press the [
(Play/Stop)] button.
6.
The count is played, and then recording begins.
When recording starts, the [
light.
(Play/Stop)] and [ (Rec)] buttons’ indicators
Stopping the Recording
Press the [
(Play/Stop)] button.
7.
Recording stops, and the indicators for the [
go out.
(Play/Stop)] and [ (Rec)] buttons
Listening to the Recorded Performance
Press the [
(Reset)] button, then press the [
(Play/Stop)] button.
8.
The recorded performance is played back.
When you press the [ (Play/Stop)] button, recording stops.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
Re-recording
When you want to re-record, specify the track button whose performance you want to re-record, then record again.
When you select a previously recorded track button and re-record, the performance from the location at which you
begin recording up to the location at which you stop recording will be replaced by the newly re-recorded
performance.
fig.panel-Rec-ReRec-e
Use the [
want to re-record.
(Bwd)] or [
(Fwd)] button to move to the measure that you
1.
2.
When you want to record over
again after deleting all of the
76).
Press the [ (Rec)] button.
A screen like the one shown below appears.
fig.Rec-OverRec1-e
When deleting the performance
for a specific track button, refer
to “Erasing the Performance on
Specific Tracks” (p. 76).
The selected setting turns
orange.
Press the cursor left or right button to select <Add On>, then press the [
button
]
3.
NOTE
The song tempo is stored within
the song you selected.
This sets the HPi-7S so you can record while listening to the song already recorded.
fig.d-Rec-OverRec2-e_50
Press the track button for the track that you want to re-record.
4.
5.
The indicators of the button you pressed and of the [
blink, and the HPi-7S enters recording-standby mode.
(Play/Stop)] button will
Press the [
(Play/Stop)] button to start recording.
The count is played, and then recording begins.
When recording begins, the [
indicators will light.
(Play/Stop)] button and [
(Rec)] button
Go ahead and perform on the keyboard.
Press the [
(Play/Stop)] button to stop recording.
6.
The [
(Play/Stop)] button and the [
(Rec)] button indicators will go out.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
Erasing a Recorded Song
A recorded song can be erased in the following two ways:
Method 1: After recording a song, press the [
(Song)] button and select another
(Song)] button and press the [ (Rec)] button.
song in the “song selection” screen.
Method 2: Hold down the [
When either of these operations are performed, a display like the following will
appear.
fig.d-DelSongOK-e_50
If you select <OK>, the song will be deleted. If you do not want to erase the song, save
it on USB Memory or “Favorites” (p. 72, p. 80).
■ Erasing the Performance on Specific Tracks
You can select and erase performances on specific tracks.
Hold down the Track button for the track containing the performance you
want to erase, then press the [ (Rec)] button.
1.
The Track button’s indicator goes out, and the recorded performance is erased.
Recording Songs Starting with Pickups
You can record songs that start with pickup beats (songs that start on a beat other than the measure’s first beat).
Carry out Steps 1–3 on p. 70 to prepare for recording.
1.
If the [
is lit.
(Rec)] button’s indicator is not lit, press the [
(Rec)] button so the indicator
The HPi-7S is put in recording standby.
Press the [
(Bwd)] button one time.
2.
The measure number in the upper right of the notation screen changes to “PU,” and
the HPi-7S is set to record a song starting with a pickup.
fig.d-PU-e_50
Press the [
(Play/Stop)] button, then record the performance.
The count is played, and then recording begins.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Performance
Multitrack Recording on Five Tracks
Multitrack recording is a method by which you can record additional tracks while listening to the previously
recorded tracks.
The HPi-7S provides five tracks, so you can record different sounds on each track to create an ensemble song.
→ You can also record on 16 tracks (p. 94).
fig.panel-Rec5trk-e
Recording the First Track
The song tempo will be
remembered as the tempo at
which you recorded the first
track.
Record your performance as described in “Recording a New Song” (p. 70).
1.
Recording the Second and Subsequent Tracks
NOTE
Select and record additional tracks one at a time as described in “Re-
recording” (p. 75).
2.
Only drum set or SFX set
sounds can be recorded in the
[R/Rhythm] button.
For the second and subsequent recordings, you can listen to the previously recorded
performances while you record.
Record additional tracks as desired to complete the song.
3.
The Five Track Buttons and 16 Parts
Many songs in commercially available SMF music files consist of 16 parts. The
16 parts are divided among the five track buttons.
The track buttons and the 16 parts correspond as follows.
Track button
[R/Rhythm]
[1/User]
Part
10, 11
1
[2/Accomp]
[3/Left]
2, 5–9, 12–16
3
4
[4/Right]
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving the Performance
Using External Memory
If you install USB Memory or a floppy disk drive (optional; sold separately), you’ll be able to save songs you’ve
recorded and listen to commercially available music files.
■ Connecting an USB Memory
Connect the USB Memory to the External Memory connector.
fig.ConnectUSB1-e
disk drive, substitute “floppy
disk” wherever the term “USB
memory” appears here.
1.
External Memory
Connector
If connecting an optional floppy
disk drive, refer to “Installing
the Floppy Disk Drive” (p. 20).
NOTE
Use USB memory and floppy
disk drive available from
Roland. Proper functioning
cannot be guaranteed if other
USB memory products are
used.
■ Rotating the External Memory Connector Holder
The External Memory connector holder rotates 90 degrees left and right.
Rotating the External Memory connector holder allows you to avoid damaging the
connected USB Memory if something happens to bump against it.
NOTE
Grasp the External Memory connector holder and turn it 90 degrees to the
left or right.
1.
Be sure to grasp the External
Memory connector holder itself
when rotating it. Never rotate
the External Memory connector
holder by holding the
fig.ConnectUSB2-2-e
connected USB memory.
External Memory
Connector Holder
NOTE
Take care not to allow your
fingers to become pinched
when rotating the External
Memory connector holder.
90 degrees
to the left
90 degrees
to the right
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving the Performance
Formatting Media (Format)
The process of preparing USB Memory or floppy disks so that they can be used with the HPi-7S is called
“initialization” (formatting).
In certain cases, particularly with floppy disks, the media is formatted for a specific type of device. If the media
format does not match the HPi-7S’s, you will not be able to use that media with the HPi-7S.
Connect the USB Memory to the External Memory connector.
1.
2.
If connecting an optional floppy
disk drive, substitute “floppy
disk” wherever the term “USB
memory” appears here.
Press the [Function] button.
The Functions screen appears.
Press the cursor buttons to select <File>, then press the [ ] button.
NOTE
3.
4.
When an external memory is
initialized, all of the data saved
on the external memory is
erased. If you’re formatting a
used external memory for
reuse, be sure to check first to
make sure the external memory
doesn’t contain any data you
don’t want to lose.
The “File” screen appears.
Press the cursor right button to select <Format>, then press the [ ] button.
fig.d-format-e_50
NOTE
You cannot select <Format>
without any external memory
connected to the External
Memory connector.
Press the cursor right button to select <OK>, then press the [ ] button.
fig.d-FormatMsg-e_50
5.
When initializing floppy disks,
check to make sure that the
disk’s write protect tab is slid to
the “write” position (p. 10).
NOTE
media until the initialization is
completed.
Initialization of the external memory begins.
When initialization is completed, you’re returned to the “File” screen.
NOTE
If “Error” appears on screen,
take a look at “Error Message”
(p. 116).
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving the Performance
Saving Songs
A recorded performance is discarded when you switch off the power or choose another song. You can store
recorded song data to optional USB Memory and to the “Favorites.” Be sure to save important songs to USB
Memory or “Favorites.”
If connecting an optional floppy
What are “Favorites?”
disk drive, substitute “floppy
disk” wherever the term “USB
memory” appears here.
You can register songs you are currently practicing or particularly like to
“Favorites,” allowing you to select these songs easily.
You can register songs recorded with the HPi-7S and songs saved to USB
memory to the “Favorites.” When you register a song on an USB memory to
“Favorites,” you can then play back the song without connecting the USB
memory to the external memory connector.
When using a new storage
media, first initialize (format)
the external memory on the HPi-
7S. Take a look at “Formatting
Media (Format)” (p. 79).
If a recorded performance is saved to “Favorites,” the performance won’t be
erased when the power is turned off.
NOTE
Some commercially available
music files cannot be saved
because they are copy
protected.
Preparations for Saving a Song
When saving to USB Memory, connect the USB memory to the external memory
connector.
Press the [Function] button.
1.
NOTE
The Functions screen appears.
You can’t save a music CD or
audio file to the “Favorites.“
Press the cursor buttons to select <File>, then press the [ ] button.
2.
When saving to floppy disks,
first check to make sure that the
floppy disk’s protect tab is set
to the “Write” position (p. 10).
Press the cursor left button to select <Save>, then press the [ ] button.
fig.d-File1-e_50
3.
If not handled with care, a
floppy disk and an USB
memory can be damaged, or
the data on it become
corrupted, making playback
impossible. We recommend
saving your songs on two
different media.
When you want to clear all of
the content saved to the
“Favorites” and restore the
settings to the original factory
condition on the HPi-7S, refer to
“Formatting the User Memory
(Initialize User Memory)” (p.
97).
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving the Performance
Determining the Save Destination
Press the cursor up or down button to change the setting of the Save
4.
Destination.
fig.d-SaveDest-e_50
NOTE
Setting
Explanation
You cannot select <External
Memory> as the save
destination without any USB
memory connected to the
External Memory connector.
The recorded song is saved to the external memory (USB
memory, floppy disk, etc.).
External Memory
Favorites
The recorded song is saved to the “Favorites.”
Press the [ ] button.
5.
Determining the Name of the Song to be Saved
Press the cursor left or right button to select the character you want to change, then
6.
press the cursor up or down button to change the character.
fig.RenameSong3-e
Song Name
Displays the name of the song to save.
Characters that can be input:
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}~
Space !"#$%&'()*+,-./0123456789:;<=>?@
Character to be changed
The selected character is shown with
a black background.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving the Performance
Selecting the Save Number
Press the cursor right button one or more times to select <Save Destination>.
fig.RenameSong4-e
7.
Save Destination
Displays the save-destination song
number.
If you select a song number that
displays a song name, and save a new
song, the previous song will be erased.
The selected setting turns orange.
NOTE
Never turn off the power while
the saving operation is in
progress. Doing so will damage
the HPi-7S’s internal memory or
USB memory, making it
unusable.
Press the cursor up or down button to select the save-destination number.
8.
If a song name is displayed with a number, a song is already saved to that number.
If you select a number with a previously saved song and then proceed to save a new
song, the previously saved song will be erased. If you do not want to lose a saved
song, select a number with no song name indicated in the save-destination column.
Saving the Song
Press the [ ] button.
9.
Saving begins. The time required for saving ranges from several seconds to half a
minute or more. Don’t take the USB memory out of the external memory connector until
the saving process is finished.
It’s a good idea to get into the
habit of moving the write-
protect tab (p. 10) on the
floppy disk to the “Protect”
position when you’ve finished
saving your data. Keeping the
tab at “Protect” prevents
Press [ ] button several times; the “File” screen returns to the display.
operations that could erase
your songs by mistake.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving the Performance
Deleting Saved Songs
This deletes songs that have been saved on USB memory, or to “Favorites.”
To delete a song on an USB memory, first connect the USB memory to the external
memory connector.
Press the [Function] button.
1.
The Functions screen appears.
Press the cursor buttons to select <File>, then press the [ ] button.
2.
NOTE
Press the cursor left or right button to select <Delete>, then press the [
button.
]
You cannot select <Delete>
when there are no songs to be
deleted in the “Favorites” or in
the USB memory.
3.
Press the cursor up or down button to select the location in which the song
you want to delete is saved.
4.
fig.FileDelete1-e
NOTE
Distination
You cannot select <External
Memory> as the delete
destination without any USB
memory connected to the
External Memory connector.
The location where the song you
want to delete is stored is
displayed.
Press the [ ] button.
5.
6.
Press the cursor up or down button to select the song to be deleted.
fig.FileDelete2-e
Song Name
Displays the name of the song
that will be deleted.
NOTE
Never turn off the power while
the operation is in progress.
Doing so will damage the HPi-
7S’s internal memory or USB
memory, making it unusable.
Press the [ ] button.
7.
The selected song is deleted.
Press [ ] button several times; the “File” screen returns to the display.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving the Performance
Copying Songs on USB Memory to Favorites
You can take songs saved on USB memory and copy them to “Favorites.”
You can also copy songs in “Favorites” to USB memory.
Connect the USB memory with the song to be copied to the External Memory
connector.
1.
NOTE
You can’t copy an audio file or
music CD to “Favorites.”
Press the [Function] button.
2.
The Functions screen appears.
Press the cursor buttons to select <File>, then press the [ ] button.
3.
NOTE
Press the cursor left or right button to select <Copy>, then press the [
button.
]
4.
You cannot select <Copy>
without any USB memory
connected to the External
Memory connector.
Press the cursor up or down button to select the copy type (copy source and
destination).
5.
If copying songs from USB memory to the “Favorites,” select <External Memory to
Favorites>.
fig.d-FileCopy3-e_50
If there’s a floppy disk in the
floppy disk drive, you’ll also be
able to select “Disk to External
Memory.” Press [
] and then
proceed as directed in the
screen.
Press the [ ] button.
6.
Selecting the Song You Want to Copy
Press the cursor up or down button to select the song you want to copy.
7.
When “All” is selected, all of the songs on the USB memory are copied to “Favorites.”
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving the Performance
fig.FileCopy1-e
Copy Source
Copy Destination
Displays the copy-destination song
number.
If you select a song number that
displays a song name, and copy a
new song, the previous song will be
erased.
Selecting the Copy Destination
NOTE
When copying songs in USB
memory, songs within folders
are not copied when <All> is
selected. If a song you want to
copy is in a folder, first move
the song outside of the folder to
copy it.
Press the cursor left or right button to select Copy Destination.
8.
9.
Press the cursor up or down button to select the copy-destination number.
If a number is displayed with a song name, a song is already saved to that number.
If you select a number with previously saved song data and proceed to copy to that
location, the previously saved song will be erased. If you don’t want to erase a
previously saved song, choose a number with no song name appears in the destination
column.
NOTE
Press the [ ] button.
10.
Never turn off the power while
the operation is in progress.
Doing so will damage the HPi-
7S’s internal memory or USB
memory, making it unusable.
The song is copied.
■ Copying Songs Saved in Favorites to USB memory
Songs that have been saved to “Favorites” can be copied onto USB memory.
In this case, select <Favorites to External Memory> in Step 5 on p. 84.
fig.d-FileCopy1-e_50
NOTE
Some song data cannot be
copy because they are copy
protected.
The rest of the procedure is identical to that used for copying songs from USB memory
to “Favorites.”
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Functions that Can be Selected Using the [Function] Button
Here’s how you can easily make changes such as tuning the HPi-7S or
changing the function of the pedals.
Tone and Performance Settings
between accompaniment and
keyboard (Volume Balance)
■ Making the Settings
1. Press the [Function] button.
The Functions screen appears.
You can adjust the volume balance between the song and the sounds
2. Press the cursor buttons to select the setting you want to
you play from the keyboard.
make.
→ Refer to “Changing the Volume Balance of the Accompaniment
Pressing the cursor left or right button switches the selected setting
horizontally; pressing the cursor up or down button switches the
and Keyboard (Balance)” (p. 61) for the procedure.
selected setting vertically.
fig.Menu1-e
Adjusting the Piano Sounds
(Piano Designer)
The HPi-7S is capable of reproducing a variety of the acoustic piano’s
distinctive characteristics. You can also adjust these to suit your own
taste and style.
Press the cursor up or
down button
Refer to “Making the Settings” (previous section) for the procedure.
The selected setting is
switched vertically.
This setting is valid when some piano sounds are selected.
NOTE
■ Opening/Closing the Piano Lid (Lid)
This simulates the actual changes in sound that occur when the lid of a
Press the cursor left or right button
grand piano is set at different heights.
The selected setting is switched horizontally.
If there are any pages before or after the current page,
pressing the cursor button one or more times will
switch the display to such pages.
Setting
0–6
Explanation
As the value decreases, the lid seems to close
more, producing a softer sound. Increasing the
value opens the lid more, producing a brighter
sound.
3. Press the [ ] button.
The screen for the selected function appears.
4. Press the cursor up or down button to change the setting.
■ Changing How Rapidly Sounds Are Expressed
According to the Force Used to Play the Keys
(Hammer Response)
5. When you have finished making the settings, press the
[
] button one or more times to return to the Notation
screen.
You can adjust the timing with which sounds are produced according
to the force used to play the keys.
When a key is pressed on an acoustic piano, it causes a hammer to
move and strike the strings, producing sound. The hammers move
more slowly when the keys are played gently, meaning that sounds
are produced just slightly later than when you play the keyboard with
greater force. If the Hammer Response function is turned on, the time
between the moment you press a key until the sound is heard will
change depending on the strength with which you play. As you play
more softly, this time will become longer.
Setting
Explanation
The higher the value, the more slowly the hammers
move when the keys are played gently. When set
to Off, sounds are played immediately when the
keys are pressed, regardless of the force used to
play them.
Off, 1–10
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
■ Setting the Tuning Curve (Stretch Tuning)
■ Adjusting the Keyboard Touch (Key Touch)
Pianos are generally tuned so that the low range is flatter and the high
range is sharper than equal tempered pitches. This method of tuning is
unique to the piano, and is known as “Stretched Tuning.”
You can adjust the touch (playing feel) of the keyboard.
Setting
Explanation
You can adjust the sensitivity with which the
keyboard responds to your playing.
If you turn the keyboard’s touch sensitivity
“Fixed,” all notes will sound at a fixed loudness
regardless of how strongly you play the
keyboard.
Fixed,
Setting
On
Explanation
Super Light,
Light, Medium,
Heavy,
This tuning curve expands the low range and high
range. It is suitable for piano solos.
This is the standard tuning curve. This is the right
choice when using Dual performance (p. 56), or
when playing in ensemble with other instruments.
Super Heavy
Off
■ Making Fine Adjustments to the Keyboard
Touch Sensitivity (Key Touch Offset)
■ Adjusting Resonance when the Damper
Pedal is Depressed (Damper Resonance)
You can adjust this resonance (Damper Resonance) when the damper
You can make fine adjustments to the touch sensitivity of the keyboard.
You can adjust the keyboard touch in even greater detail than
specified by the Key Touch setting (see preceding section)
pedal is depressed.
On an acoustic piano, holding down the damper pedal will allow the
remaining strings to resonate in sympathy with the sounds that you
played from the keyboard, adding a rich resonance. The resonance is
called “Damper Resonance.”
Setting
-10-0-9
Explanation
heavier.
Setting
Explanation
Increasing the value will increase the amount of
effect. When set to Off, no Damper Resonance
is applied.
■ Changing the Velocity When the Key Touch
Off, 1–10
is Set to “Fixed” (Fix Velocity)
This sets the velocity the sound will have when the keyboard touch (p.
p. 53, p. 87) is set to “Fixed.”
■ Adjusting the Resonant Sounds when the
If you turn the keyboard’s touch sensitivity “Fixed,” all notes will sound
at a fixed loudness regardless of how strongly you play the keyboard.
Keys are Pressed (String Resonance)
When the keys are pressed on an acoustic piano, the strings for keys
that are already pressed also vibrate sympathetically. The function
used to reproduce this resonance is called “String Resonance.”
The setting described below specifies the loudness in this case.
Setting
1–127
Explanation
Setting
Explanation
Increasing this value will increase the volume of
your keyboard playing.
Increasing the value will increase the amount of
effect. When set to Off, no String Resonance is
applied.
Off, 1–10
■ Listening to a Piano Designer demo
You can hear a demonstration of the various differences in sound
created by the Piano Designer function (p. 86). When the Piano
■ Playing Sounds When the Keys Are
Released (Key Off Resonance)
This adjusts sympathetic vibrations such as an acoustic piano’s key-off
Designer screen is shown, press the [
] button to access the Piano
Designer Demo screen. To hear the demo, proceed as directed by the
screen. You can also select the piano designer demo from “Select a
Demo” screen (p. 93).
sound (the subtle sound that occurs when you release a note).
Setting
Explanation
When you have finished with Piano Designer Demo, press the [
button in the “Piano Designer Demo” screen.
]
Increasing the value will increase the amount of
effect. When set to Off, no Key Off Resonance is
applied.
Off, 1–10
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Setting
Explanation
Setting the Reference Pitch
and Temperament (Tuning)
This temperament is a combination of
meantone and Pythagorean temperaments. It
allows you to play in all keys. (First method,
number three.)
Werkmeister
■ Tuning to Other Instruments’ Pitches
When performing in ensemble with other instruments, be
aware that depending on the key, there may be some
shifting of the pitch. Tune the HPi-7S to the fundamental
pitch of the other instruments.
(Master Tuning)
NOTE
In situations such as when playing ensemble with other instruments,
you can tune the HPi-7S’s standard pitch to the pitch of another
instrument. For a cleaner ensemble sound while performing with one
or more other instruments, ensure that each instrument’s standard pitch
is in tune with that of the other instruments. The standard pitch
generally refers to the pitch of the note that’s played when you finger
the middle A key.
■ Setting the Tonic (Key)
When playing with tuning other than equal temperament, you need to
specify the tonic note for tuning the song to be performed (that is, the
note that corresponds to C for a major key or to A for a minor key).
Setting
If you choose an equal temperament, there’s no need to select a tonic
note.
415.3 Hz–440.0 Hz–466.2 Hz
Setting
■ Changing the Tuning (Temperament)
You can play classical styles such as Baroque using historic
C, C#, D, Eb, E, F, F#, G, Ab, A, Bb, B
temperaments (tuning methods).
Today, compositions are generally created with equal temperament in
mind and are played using equal temperament. However in past ages
of classical music, a variety of temperaments were used. By playing in
the temperament that was in use when a composition was created,
you can experience the sonorities of chords originally intended for
that song.
Setting
Equal
Explanation
This temperament divides the octave into 12
equal parts. All intervals will be slightly out of
tune by the same amount.
This temperament makes the 5th and 3rd
intervals pure. It is unsuitable for playing
melodies and modulation is not possible, but it
produces beautifully harmonious chords.
Just (Maj)
Just intonation differs between major and minor
keys. The same results as major can be
obtained in a minor key.
Just (min)
Arabic
This tuning is suitable for the music of Arabia.
This temperament is a modification of
meantone temperament and just intonation,
allowing more freedom of modulation. It allows
you to play in all keys (third method).
Kirnberger
This temperament is based on the theories of
the Greek philosopher Pythagoras, and has
pure fourths and fifths. Chords containing a
third will sound impure, but melodies will
sound good.
Pythagorean
Meantone
This temperament is a partial compromise of
just intonation in order to allow modulation.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Adjusting the Depth of the Effects
(Effect)
Expressive (Adjusting the sound)
You can adjust the brightness of the sound, or make it more
You can adjust the depth of the reverb (p. 54) and chorus (p. 54).
Refer to “Making the Settings” (p. 86) for instructions.
expressive.
Reverb
→ “Adjusting the Brightness of the Sound (Brilliance)” (p. 55)
Setting
1–10
Explanation
→ “Adding Liveliness to the Sound (Dynamics Sound Control)” (p.
55)
Increasing the value will increase the amount of
reverb effect.
Giving the Sound More Spatial
Depth (3D Sound Control)
This setting is valid when the [Reverb] button is turned on to
apply an effect to the sound.
Holding down the [Reverb] button, press the cursor up or
down button to adjust the depth of reverb effect.
You can use the internal speakers to add a three-dimensional
spaciousness to the sound of the accompaniment.
You cannot make separate reverb effect depth settings for
each individual tone. The effect will be applied with the
same depth to all tones.
NOTE
■ Adjusting the Depth of the Sound (Depth)
The HPi-7S provides a “3D Sound Control” function, which creates the
sense of spatial depth that you experience when playing a grand
piano. This function adds the natural resonance and spaciousness that
are characteristic of an acoustic piano.
This will not change the reverb depth for the song that is
playing back.
NOTE
Refer to “Making the Settings” (p. 86) for instructions.
You can adjust the spatial depth over four levels.
Chorus
You can set the amount of chorus applied for each tone individually.
1. Select the tone for which you want to adjust the chorus.
2. Press the [Function] button.
Setting
Explanation
of the sound.When set to Off, no 3D Sound Control
effect is applied.
Off,1–4
3. Press the cursor buttons to select <Effect>, then press the
[
] button.
You can use the Memory Backup function to store this
setting in internal memory (p. 97).
4. Press the cursor right button to select <Chorus>.
5. Press the cursor up or down button to change the setting.
You can change the way in which the 3D Sound Control
function is applied (p. 90).
Setting
1–10
Explanation
The amount of chorus effect applied increases as
the value is raised.
3D Sound Control does not affect the sound from the Input
jack or the sound of external devices connected to the MIDI
Out connector.
NOTE
As long as the power to the HPi-7S is turned on, you can
store the chorus settings to each tone individually. In
addition, you can use the Memory Backup function (p. 97)
to keep the stored settings even when the power is turned
off.
When you turn Twin Piano on or Dynamic Sound Control
on, 3D Sound Control will be turned off.
NOTE
NOTE
If you use the Transpose function (p. 68) or the Center
Cancel function (p. 49) when a music CD song or an audio
file is selected, 3D Sound Control will be turned off.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Changing How Grand Space is Applied
(3D Mode)
Adjusting the tonal character
(Equalizer)
This specifies how 3D Sound Control will be applied.
Refer to “Making the Settings” (p. 86) for instructions.
■ Changing the Equalizer Type
You can switch the equalizer settings to change the tonal character.
Setting
Auto
Explanation
When the headphones are connected, the depth
effect is optimized for headphones, and when no
headphones are connected, the optimal depth for
speakers is applied.
The HPi7-S provides four equalizer settings.
Setting
Off
Explanation
The equalizer function will be off.
The optimal depth for speakers is used,
regardless of whether or not headphones are
connected.
3D sound control is also applied to the sound
output from the Output connectors, making this
convenient when you want to play through
speakers connected to the Output connectors.
Boosts the high frequencies, making the sound
brighter and more brilliant.
1
2
Speaker
Reduces the high frequencies, making the sound
more mellow.
Boosts the mid and low frequencies, giving the
sound more power.
3
4
The optimal depth for headphones is used,
regardless of whether or not headphones are
connected.
A setting suitable for piano solos.
Headphones
■ Changing the Equalizer Settings (Equalizer)
You can use the equalizer to modify the tonal character of the sound
by boosting or reducing just the low-frequency or high-frequency
range of the sound.
Adjusting the Volume of an Audio
File (Audio Volume)
1. Choose an equalizer setting from 1 through 4.
You can adjust the volume at which an audio file or music CD will
play.
2. Press the [ ] button.
3. Press the cursor buttons to select the setting you want to
→ “Adjusting the Volume of an Audio File or Music CD” (p. 49)
make.
4. Press the [-] [+] button to change the setting.
Indication
Low Gain
Value
Description
Adjusting the Depth of Mic Echo
(Mic Echo)
Adjusts the level of the low-
frequency range.
-12– +12 dB
When using a mic, you can apply an effect similar to a karaoke echo
Frequency point in the low-
frequency range. Generally,
this changes the level at and
below this frequency.
to the sound of the mic.
Low Freq
100–1.0k (Hz)
-12– +12 dB
Refer to “Making the Settings” (p. 86) for instructions.
Low Mid
Gain
Adjusts the level of the low-
frequency range to midrange.
Setting
Explanation
Increasing this value will apply the echo more
strongly.
Frequency point in the low-
frequency range to midrange.
This changes the level of the
specified bandwidth centered
on this frequency.
Off, 1–10
Low Mid Freq 16–16.0k (Hz)
Changes the bandwidth of the
low-frequency range to
0.5, 1.0, 2.0, 4.0, midrange. The bandwidth
Low Mid Q
8.0
affected by the controls
narrows as the value
increases.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Indication
Value
Description
Changing the Pedal Functions
High Mid
Gain
Adjusts the level of the mid- to
high-frequency range.
-12– +12 dB
(Pedal)
Frequency point in the mid- to
high-frequency range to
midrange. This changes the
level of the specified
You can change the function of the left pedal and center pedal.
Refer to “Making the Settings” (p. 86) for instructions.
High Mid
Freq
16–16.0k (Hz)
Left Pedal, Center Pedal
bandwidth centered on this
frequency.
Setting
Explanation
Changes the bandwidth of the
mid- to high-frequency range.
The bandwidth affected by the
controls narrows as the value
increases.
When you hold down the pedal and play
the keyboard, the sound will have a softer
tone.
Upper Soft
(only left pedal)
0.5, 1.0, 2.0, 4.0,
8.0
High Mid Q
Upper Sostenuto
(only center pedal)
Only the notes that were played while the
pedal was held down will be sustained.
Adjusts the level of the high-
frequency range.
High Gain
High Freq
-12– +12 dB
The tempo of the song, or metronome will
be set by the interval at which you press the
pedal. When the pedal to which this
function is assigned is pressed several
times at the desired rate, the tempo will be
set accordingly.
Frequency point in the high-
frequency range. Generally,
this changes the level at and
over this frequency.
Tap Tempo
1.25k–16.0k (Hz)
When using Split performance (p. 57), the
same effect as the damper pedal will be
applied to the left-hand keyboard area.
NOTE
Sounds may become distorted as the Gain level increases.
Lower Damper
Pressing the pedal during playback of a
song stops the playback. When the pedal
is released, playback resumes from the
beginning of the measure that was playing
when the pedal was pressed. When the
pedal is pressed in rapid succession, the
playback will resume backs up the same
number of measures as the number of times
the pedal is pressed.
Replay
Pressing the pedal turns the notation
appearing on the display to the preceding
page while the playback of a song is
stopped.
Page Bwd
Pressing the pedal turns the notation
appearing on the display to the next page
while the playback of a song is stopped.
Page Fwd
Play/Stop
Performs the same function as the [
(Play/Stop)] button.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Screen Display Settings
Recommended Image Data
Size
640 x 240 pixels
Changing the Language
Displayed in the Screen
(Language)
Format
BMP format, JPEG format
1–8 characters in length (lowercase is ok).
A filename extension of “.bmp” or “.jpg“ must be
added after the name.
You can change the language that is displayed in the screen.
Use of the following alphanumeric characters is
recommended for naming image files.
A B C D E F G H I J K L M N O P Q R S T U V W
X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
Name
Refer to “Making the Settings” (p. 86) for instructions.
Setting
English, Japanese, Germany, French, Spanish
Germany, French, and Spanish are displayed for some
functions. Other screens will be displayed in English.
When You Want to Display Images
Residing in Folders
NOTE
1. Bring up the “User Image Display” screen.
Selecting Images to be Shown on
the Displays
2. Press the cursor up or down button to select the folder
containing the desired image.
3. Press the [ ] button.
(User Image Display)
The name of the image file in the folder is displayed.
You can have image data from computers and other devices shown
on the onboard display, when the HPi-7S is turned on.
4. Press the cursor up or down button to select the image you
want to display from the list, then press the [
] button.
→ Displaying images saved on floppy disks on the HPi-7S’s screen
requires a floppy disk drive (optional; sold separately).
To Leave a Folder
1. Prepare the desired image data with your computer.
2. Save the images you want to display to USB memory
1. Press the cursor up or down button to select
(Up).
(optional) or a floppy disk (optional).
2. Press the [ ] button.
3. Connect the USB memory containing the image to the HPi-
7S’s External Memory connector.
■ To Delete a Saved Image
When using a floppy disk, insert the floppy disk in the floppy disk
drive connected to the External Memory connector.
1. Press the cursor up button one or more times to select
4. In Step 2 on p. 86, select <User Image Display> and press
“User Image.”
the [
] button.
2. Press the [ ] button.
The “User Image Display” screen appears.
fig.d-UserDisplay2-e_45
The following message appears.
3. Press the cursor right button to select <OK>, then press the
[
] button.
By selecting the image you want to display and pressing the
cursor left or right button, you can display the selected image in
the screen to confirm the image.
The saved images are deleted.
5. Press the cursor up or down button to select the image you
want to display from the list, then press the [
] button.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Playing the Demos
Changing the Parts Assigned to
the Track Buttons During SMF
Playback (Track Assign)
Ordinarily, when playing back SMF music files for Roland Piano
Digital instruments (p. 125), the left-hand part is assigned to the Track
[3/Left] button, and the right-hand part is assigned to the Track [4/
Right] button. However, right-hand and left-hand part assignments in
certain SMF music files may differ.
You can play demo that give you an idea of the HPi-7S’s various
functions.
1. Hold down the Track [4/Right] button and press the
[Wanderland] button.
The Select a Demo screen appears.
2. Use the cursor buttons to select “Auto Demo.”
3. Press the [ ] button.
The HPi-7S’s functions appear in sequence in the display.
If these are set to “Auto,” and as a result you are unable to use the
track buttons to control the left- and right-hand parts properly, change
the setting to “2/1 Part” or “3/4 Part.”
Press a button or a key on the keyboard to stop the demo.
You can set the HPi-7S so that the demo with all of the
songs starts playing automatically if the instrument is not
played or adjusted for several minutes.
Refer to “Making the Settings” (p. 86) for instructions.
Setting
Auto
Explanation
→ “Setting the Demo (Auto Demo)” (p. 93)
The part assigned to each track will be
determined automatically, depending on the
song file.
By selecting “Piano Designer” in the demo screen, you can
listen to a Piano Designer demo.
Part 1 will be assigned to the right-hand track,
part 2 to the left-hand track, and part 3 to the
user track.
2/1 Part
3/4 Part
Part 4 will be assigned to the right-hand track,
part 3 to the left-hand track, and part 1 to the
user track.
Setting the Demo (Auto Demo)
Sets whether or not Auto Demo is started when no action is taken for a
set length of time.
The Track Assign function does not affect internal songs or
song data that is other than SMF format.
Refer to “Making the Settings” (p. 86) for instructions.
NOTE
NOTE
Item
Explanation
Setting
On, Off
After changing this setting, try selecting the song once
again.
Sets whether or not Auto Demo is
started when no action is taken for a
set length of time.
Auto Start
Selects the image to be displayed in
the screen when Auto Demo starts.
Select <Demo> to display the demo
introducing the HPi-7S’s functions.
Select <User Image> to display the
image saved with “User Image
Display” (p. 92).
Demo,
User Image
Mode
BGM
Selects whether or not BGM
(background music) is played when
Auto Demo starts. When <On> is
selected, all of the songs are played
in random order.
On, Off
If you select <Demo> for “Mode” with an image saved in
“User Image Display” (p. 92), the saved image appears at
the beginning of the demo.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Basic Procedure
First, have the song that you want to edit selected.
Recording and Playing Back
Performances of Specific
Instruments (16 Track)
The HPi-7S lets you record 16 separate parts. Multitrack recording is a
method of recording whereby you listen to what has previously been
recorded while recording new parts on top of that material.
1. Press the [Function] button.
The Functions screen appears.
2. Press the cursor buttons to select the <16 Track>, then
press the [
] button.
A screen like the one shown below appears.
fig.d-16Track-e_45
By recording a different tone to each part, you can create song data
for performances that feature up to 16 different tones layered
together.
The function used for recording the 16 individual parts one at a time is
called the “16-track sequencer.”
fig.16Track-e
16-Track Sequencer
You can record performances for up to 16 parts,
overlaying them part by part, to create a single song.
Part 1
Flute Part
Part 2
Bass Part
The characters for parts with no recorded data are grayed out.
Part 3
Piano Part (left hand)
Part 4
3. Press the cursor buttons to select the part you want to edit.
Piano Part (right hand)
•
•
•
4. Make the part settings (p. 95), mute settings (p. 95), and
Part 16
tone settings (p. 95).
5. Record the performance (p. 95).
16-Track Sequencer and the Track Buttons
In addition to the “16-Track Sequencer” function, the “Track Buttons”
(p. 59) are another of the unit’s playing/recording functions.
6. When you have finished the settings and recording, press
the [ ] button.
These “track buttons” group the 16-track sequencer’s 16 parts with
five buttons. Using the 16-track sequencer to work with performances
recorded with the track buttons allows you to record even more
sounds and edit with precision.
If the Following Message Appears
fig.d-16TrackOK-e_45
The track buttons correspond to the 16-track sequencer’s parts as
shown below.
Track button
[R/Rhythm]
[1/User]
16-track Sequencer’s Part
10, 11
Press the cursor right button to select <OK>, then press the [
button
]
1
[2/Accomp]
[3/Left]
2, 5–9, 12–16
If you select <Cancel>, the “16-track Sequencer” screen
closes without any changes being made to the part settings.
3
4
[4/Right]
Each of the 16-track sequencer’s parts is used for recording a single
tone, so you cannot use it to record tones that combine two tones
simultaneously, as in Dual (p. 56) and Split (p. 57) performances.
You can also change the tones in each part, select specific parts for
playback (solo), and prevent specified parts from playing (mute).
Playback with only a single part muted is called “Minus One.”
You can even set solo and muting during playback.
→ Part 11 of Roland SMF music file that is available for purchase is
included with the track button [2/Accomp], but the
correspondence of other parts to the track buttons is the same.
Some commercially available SMF music files may contain
NOTE
data that cannot be edited.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Preventing a Part from Playing (Mute)
2. Press the cursor left or right button to select the item, then
press the cursor up or down button to change the setting.
1. Press the cursor buttons to select the part you want to
mute.
Item
Explanation
Volume
Changes the volume level.
2. Press the [-] [+] button or ,cursor left button left and right to
select Solo or Mute.
Changes the amount of reverb effect applied to
the sound.
Reverb
Chorus
Button Function
Explanation
Changes the amount of chorus effect applied to
the sound.
Only the sounds in the selected part is
played (Solo).
Part other than those selected have an “M”
appearing with the numbers.
Pressing the [+] button
Shifts the direction from which the sound is
heard between left and right.
Press the cursor up button to shift the sound to
the right, or press the cursor down button to
shift it to the left.
Pan (Panpot)
The sounds of the selected parts are not
played (they are muted).
The number of the muted part is displayed
as “M.”
Pressing the [-] button
fig.16TrackMute-e
What’s Panpot?
Panpot is the control that determines the placement of the sound
in the stereo sound field between left and right speakers. By
altering the Panpot setting, you can change the perceived
location of the sound between the left and right speakers.
Muted Part
Recording
1. Press the cursor buttons to select the part you want to
record.
Press the [-] [+] button once more to cancel the solo or mute.
2. Use the [
(Bwd)] or [
the measure you want to record.
(Fwd)] button to move to
Changing Tones
3. Set the recording tempo (p. 62) and metronome (p. 63).
4. Press the [ (Rec)] button.
1. Press the Tone button to select the Tone group.
2. Press the cursor buttons to select the tone.
The HPi-7S goes into record standby.
Making Part Settings
5. Press the [
(Play/Stop)] button to start recording.
This makes more detailed settings for the parts.
The count is played, and then recording begins.
1. Press the cursor buttons to select the part you want to edit,
6. Press the [
(Play/Stop)] button to stop recording.
then press the [
] button.
A screen like the one shown below appears.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Playing Back Songs (Play Mode)
With the normal setting, GS tones (sounds that are compatible with
other GS instruments) will normally be used to play back song data.
By changing this setting, you can play back song using HPi-7S-specific
tones for certain portions of the data.
Switching VIMA TUNES
Recommended Tones
(Recommended Tone)
You can connect a commercially available USB CD drive to the HPi-
7S, and play back separately sold CD-ROMs created for the VIMA
(VIMA TUNES).
Refer to “Making the Settings” (p. 86) for instructions.
Songs on VIMA CD-ROM (VIMA TUNES) are programmed with
“recommended tones” suitable for each song.
Setting
GS
Explanation
When you select a song from a VIMA CD-ROM (VIMA TUNES),
recommended tones will be assigned to the HPi-7S’s [Strings], [Voice]
Playback uses GS-compatible tones for performances
that sound like other GS instruments.
Playback uses HPi-7S tones for greater
expressiveness. However, differences may appear
when playing back using devices other than the HPi-
7S.
When you press a flashing Tone button, the recommended tone is then
selected, enabling you to perform the selected song using a tone
matched to that song as it plays back.
HPi
You can set the HPi-7S so that the recommended tones are
automatically assigned or not assigned.
After changing this setting, try selecting the song once
again.
NOTE
Refer to “Making the Settings” (p. 86) for instructions.
Setting
On
Explanation
When you select a song from a VIMA CD-ROM
(VIMA TUNES), the recommended tones will
automatically be assigned to the HPi-7S’s [Strings],
[Voice] and [Others] tone buttons.
Displaying the Lyrics (Lyrics)
Some commercially available music files for use in karaoke, as well as
some of the internal songs include lyrics data. You can have the lyrics
screen be displayed automatically when playing back these kinds of
song data.
When you select a song from a VIMA CD-ROM
(VIMA TUNES), the recommended tones are not
used, and only the HPi-7S’s internal tones can be
selected.
Off
Refer to “Making the Settings” (p. 86) for instructions.
Setting
Off
Explanation
This is set to “On” at the factory.
The lyrics screen is not displayed, even when
playing back song data containing lyrics data.
The notation and lyrics are displayed in the
Notation screen.
Adjusting the Volume
(Master Gain)
If you are playing the HPi-7S through a connected external system,
there may be cases in which the volume from your external system is
too low even when the HPi-7S’s volume is turned to the maximum
setting. In such cases, you can adjust the master gain setting as
follows.
The lyrics screen is displayed automatically when
song data containing lyrics data is played back.
You can confirm lyrics in the lyrics screen when, for
example, the lyrics cannot be displayed in full
within the Notation screen.
On
Adjusting the master gain will also affect the volume of the internal
speakers and headphones.
Refer to “Making the Settings” (p. 86) for instructions.
Setting
-12–0–12 dB
The sound may distort if you increase the volume
excessively.
NOTE
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Other Settings
Remembering the Settings Even
(Memory Backup)
Formatting the User Memory
(Initialize User Memory)
Normally, the settings of the various variations will revert to their
default values when the power is turned off. However, you can specify
that the various settings will be remembered even when the power is
turned off.
The HPi-7S features an internal storage area where you can save
recorded performances and User image. This space is called the
“User Memory.”
The following content is stored to the user memory.
• Songs registered to the “Favorites”
This function is called “Memory Backup.”
1. In step 2 on p. 86, select “Memory Backup” and press the
• Image files set with the “User Image Display”
[
] button, and a message will be displayed.
fig.d-InitializeUserMem-e_45
To delete all of the content held in the user memory and restore the
original settings, carry out the following procedure.
1. In step 2 on p. 86, select “Initialize User Memory” and
press the [
fig.d-InitializeUserMem-e_45
] button, and a message will be displayed.
2. Press the cursor right button to select <OK>, then press the
[
] button; the Memory Backup is executed.
Never turn off the power while the display indicates
“Executing....” Doing so will damage the HPi-7S’s internal
memory, making it unusable.
NOTE
2. Press the cursor right button to select <OK>, then press the
[
] button; the initialization is executed.
Stored Contents
Piano Designer
Lid, Hammer Response, Stretched Tuning,
Damper resonance, String Resonance,
Key Off Resonance, Key Touch,
Key Touch, Key Touch Offset,
Never turn off the power while the display indicates
“Executing....” Doing so will damage the HPi-7S’s internal
memory, making it unusable.
NOTE
Key Touch Fix Velocity
Tuning
Master Tunig, Temperament, Key
Link on/off
Carrying out this operation does not initialize any settings
other than the user memory settings. To restore settings other
than those for the user memory to the original default
settings, carry out Factory Reset (p. 98).
Transpose
NOTE
Reverb on/off, Reverb depth for each sound
Chorus on/off, Chorus depth for each sound
Effects
Equalizer
EQ Number (off, 1, 2, 3, 4), Various settings
Dynamics Sound Control
Adjusting the
Sound
3D
Depth, Mode
Metronome
Metronome Sound
Count-in sound, Count-down sound,
Count-in measures
Count
Externaldisplay
settings
Language, Track Assign, Play Mode,
Lyrics, Twin Piano Mode,
Dual Balance, Split Point
Other
→ The settings for the following parameters are saved even without
Memory Backup.
Auto Demo (p. 93), USB Driver (p. 110)
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
USB memory
Restoring the Original Default
Settings (Factory Reset)
Using the V-LINK Function
Connecting the HPi-7S to a V-LINK compatible image device allows
you to control the images with the HPi-7S.
The memory backup settings can be restored to the original default
condition. This operation is referred to as “Factory Reset.”
V-LINK (
) is a function that allows music and
When you execute “Factory Reset,” all settings you’ve stored
up to that point will be cleared, and reset to their factory-set
condition.
images to be performed together. By using MIDI to connect two
or more V-LINK compatible devices, you can easily enjoy
performing a wide range of visual effects that are linked to the
expressive elements of a music performance.
NOTE
1. In step 2 on p. 86, select “Factory Reset” and press the
[
] button, and a message will be displayed.
Refer to “Making the Settings” (p. 86) for instructions.
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
NOTE
power on all devices before making any connections.
Setting
On
Explanation
Switches to Image Control mode. You can control
images using the twelve keys at the left end of the
keyboard.
Off
Cancels Image Control mode.
2. Press the cursor right button to select <OK>, then press the
] button; the Factory Reset is executed.
[
Once the Factory Reset has been completed, switch the power
off, then on again.
Never turn off the power while the display indicates
“Executing....” Doing so will damage the HPi-7S’s internal
memory, making it unusable.
NOTE
A0 B0 C1 D1 E1 F1 G1
A0 – G#1
Executing this operation will not erase the songs from
“Favorites“ or USB memory. If you want to erase all songs
from the HPi-7S’s internal memory, refer to “Formatting the
User Memory (Initialize User Memory)” (p. 97).
While V-LINK is switched on, no sound is produced when
you press any of the twelve keys at the left end of the
keyboard. In addition, an icon indicating that V-LINK is on
appears in the Notation screen.
NOTE
Disabling the Buttons (Panel Lock)
The “Panel Lock” function locks the HPi-7S in a state where all buttons
will be disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
1. Press the One Touch [
] button and [Count/Marker]
button simultaneously.
Pressing buttons during playback or recording of a song
stops the playback or recording.
NOTE
Canceling the Panel Lock function
1. Once again, press the One Touch [
] button and
[Count/Marker] button simultaneously.
Panel Lock will be cancelled when you turn off the power.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Item
Setting
Off
Changing the Notation Screen
Settings
You can change the parts shown in the notation screen, and how the
notation is displayed.
Pitches
Specify how note
names are
displayed when the
notation screen is
expanded.
Not displayed.
The note name (C, D, E) will
be displayed.
C, D, E
Do, Re, Mi
(Fixed)
The pitch names (fixed Do)
are displayed.
1. Press the [
(Notation)] button one or more times to
display a screen like the following.
Do, Re, Mi
(Movable)
The syllable names (movable
Do) are displayed.
fig.d-Score1+Options-e_45
Item
Setting
Auto
Clef L, Clef R
The display will be switched
automatically.
Specifywhetherthe
notation will be
displayed as a G-
clef or F-clef.
G Clef
F Clef
Select a G-clef notation.
Select a F-clef notation.
Item
User
Setting
User Track,
Part 1–16
Select the part that will be displayed when you
You can set the HPi-7S so that while the Notation screen is being
displayed, a screen like that above continues to appear even if
select
(User) for “Part” in the notation screen.
you press the [ ] button.
Item
Left
Setting
2. Press the [ ] button; the <Notation Menu> is displayed.
fig.d-ScoreMenu1-e_45
Left Track,
Part 1–16
Select the part that will be displayed when you
select
(Left) for “Part” in the notation screen.
Item
Right
Setting
Right Track,
Part 1–16
Select the part that will be displayed when you
select
(Right) for “Part” in the notation screen.
Item
Setting
Key
The key will be set automatically
according to the song file.
Auto
3. Press the cursor buttons to select <Notation Options>, then
Display the
notation in the
specified key.
press the [
] button.
# x 6–0–
b x 5
The notation will be displayed in
the specified key.
A screen like the one below appears.
fig.d-ScoreOption1-j_45
Item
Setting
Resolution
16th Note,
32nd Note
Sets the minimum note value displayed in the
screen.
Item
Setting
Bouncing Ball
Sets whether or not the animation of the ball
bouncing in time with the tempo is to be displayed
when song data is played back.
On, Off
Setting
The Notation Options screen has four pages. Switch among the
pages in the screen by pressing the cursor left or right button.
Item
Color Notation
Sets whether or not the note currently being played
appears in color in the notation when song data is
played back.
On, Off
When set to <On>, notes in the right-hand part
appear in red, while the notes in the left-hand part
are displayed in green.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Editing Functions
Editing Songs (Song Edit)
Function
Explanation
Page
Undoes editing operations that have
been performed.
There are many ways you can edit performances recorded using the
HPi-7S Track button (p. 59) or 16-track sequencer (p. 94).
Undo
p. 100
Copy
Copies measures.
p. 101
p. 101
p. 102
p. 102
p. 102
Basic Operation of the Editing Functions
Quantize
Delete
Corrects Timing Discrepancies.
Deletes measures.
1. Press the [
(Notation)] button one or more times to
display a screen like the following.
Insert
Inserts a blank measure.
Transposes parts individually.
Transpose
fig.d-Score1+Options-e_45
Erases data in measures, creating blank
measures.
Erase
p. 103
p. 103
p. 103
p. 104
Part
Exchange
Exchanges the sounds in parts.
Allows corrections to be made note by
note.
Note Edit
PC Edit
Allows editing of the Tones changes that
occur during a song.
You can set the HPi-7S so that while the Notation screen is being
displayed, a screen like that above continues to appear even if
you press the [ ] button.
→ “PC” stands for “Program Change,” which is a command that
tells an instrument to change the sound it’s using. With songs that
rely on the use of a variety of sounds, a “PC” needs to be located
at every point within the song where the Tone is to be changed.
2. Press the [ ] button; the <Notation Menu> is displayed.
fig.d-ScoreMenu1-e_45
* Some edits can’t be undone, not even by choosing “Undo.” We
recommend saving songs to USB memory or to “Favorite“ before
editing. For more on how to save songs, refer to “Saving Songs”
(p. 80).
→ You can press the [
(Play/Stop)] button in the “Song Edit”
screen to play back the edited song. However, you cannot play
back the song while editing in the various edit screens.
■ Undoing Edits (Undo)
3. Press the cursor buttons to select <Song Edit>, then press
the [
] button.
You can cancel an editing operation that you’ve just carried out. This
is handy when you want to undo an edit and restore data to the way it
was before.
fig.d-ScoreOption1-j_45
* There are some edits that can’t be restored.
Editing functions that can be undone appear on screen.
fig.d-edit-Undo-e_45
4. Press the cursor buttons to select the function, then edit it.
The “Song Edit” screen has four pages. Press the cursor left or
right button one or more times to switch the screens. For more
detailed information, refer to the corresponding page for each
function.
Selecting <Cancel> with the cursor buttons and pressing the <
>
button returns the “Song Edit” screen to the display, and the undo of
the edit is cancelled. If you select <OK> and press the < > button,
the editing operation indicated in the screen is undone.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
■ Copying Measures (Copy)
You can copy a portion of a performance to a different bar in the
same Part or to a measure in another Part. This is handy when you’re
composing a song that repeats a similar phrase.
fig.e-copy-e
Item
To
Explanation
Copy-destination measure number
When <End> is selected, the data is copied to the end of
the song.
Times
Number of times the data is to be copied
1
1
2
2
3
3
4
4
5
5
6
6
7
7
■ Correcting Timing Discrepancies (Quantize)
You can correct for timing discrepancies in a recorded performance
by automatically aligning the music with the timing you specify. This is
called “Quantize.”
8
9
10
As an example, let’s say that the timing of some quarter-notes in a
performance is a little off. In this case, you can quantize the
performance with quarter-note timing, thus making the timing
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-Copy-e_45
accurate.
fig.e-quantize-e
Example: Quarter-note resolution
Actual note data
1
2
2
3
3
4
4
Example: Sixteenth-note resolution
Actual note data
1
Note data after quantization
Item
From
Explanation
Measure number of the first measure of the segment to be
copied
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-quantize-e_45
Number of measures to be copied
When <All> is selected, all of the measures are copied.
For
Copy-source Track button or part number
Choosing <All> copies all Parts. If you choose a Track
button, you can only copy to the selected Track button.
You cannot copy to the other Track buttons. When <All>
or a track button is selected, “- - -” appears in the “Dst”
field.
Src
Dst
Copy-destination part number
Data can be copied in the following three ways:
If there is a performance recorded at the
Item
From
Explanation
Measure number of the first measure of the
segment to be quantized
copy destination, this previous recording is
Replace
erased, and the copied data is written in its
place.
Number of measures to be quantized
For
When <All> is selected, all of the measures are
quantized.
If there is a performance recorded at the
copy destination, the copied data is
layered over the previous recording. If the
Tones used for the copy source and copy
destination are different, the copy-
destination Tone is used.
Track button or part number to be quantized
Choosing <All> quantizes the same passage in all
Parts.
Mode
Mix
Tr/Pt
Quantization timing
If there is a performance recorded at the
copy destination, the copied portion is
inserted without erasing the previous
recording. The song is lengthened by the
number of inserted measures.
Select one of the following values
1/2 (half note), 1/4 (quarter note),
1/6 (quarter-note triplet), 1/8 (eighth note),
1/12 (eighth-note triplet), 1/16 (sixteenth note),
1/24 (sixteenth-note triplet),
Insert
Resolution
1/32 (thirty-second note)
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
fig.d-edit-Insert-e_45
■ Deleting Measures (Delete)
You can delete a part of a performance measure by measure. When a
portion of a performance is deleted, the rest of the performance is
shifted up to fill the gap. Erasing measures in a specified passage is
called “Delete.”
fig.e-delete-e
1
1
2
2
3
3
4
4
5
5
6
6
7
8
9
10
Item
From
For
Explanation
Measure number of the first measure of the
segment to be inserted
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-Delete-e_45
Number of measures to be inserted
Track button or part number where data will be
inserted
When <All> is selected, blank measures are
inserted at the same place in all parts.
Tr/Pt
■ Transposing Individual Parts (Transpose)
You can transpose specified parts and tracks individually.
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-transpose-e_45
Item
From
Explanation
Measure number of the first measure of the
segment to be deleted
Number of measures to be deleted
When <All> is selected, all of the measures are
deleted.
For
Track button or part number to be deleted
When <All> is selected, the same portion of all
parts is deleted.
Tr/Pt
Item
From
Explanation
■ Inserting Blank Measures (Insert)
You can add a blank measure at a location you specify. This addition
Measure number of the first measure of the
segment to be transposed
of a blank measure is called “Insert.”
Number of measures to be transposed
When <All> is selected, all of the measures are
transposed.
fig.e-insert-e
For
Ex. To insert measures (bars) 5–7
Track button or part number to be transposed
When <All> is selected, the same portion of all
parts is transposed.
Tr/Pt
1
1
2
2
3
3
4
4
5
5
6
6
7
7
The range of transposition
You can select the range to transpose the data,
from -24 (two octaves down) to +24 (two octaves
up), adjustable in semitones.
8
9
10
Bias
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
You cannot transpose performances of the drum sets and
sound effect sets (such as the Rhythm Track).
NOTE
102
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Exchanging Parts (Part Exchange)
■ Making Measures Blank (Erase)
You can delete the performance data in a specified block of
measures, turning them into blank measures without reducing the
length of the song. This process is called “Erase.”
fig.e-erase-e
You can exchange the notes recorded for a particular part with the
notes recorded for another part. This process of exchanging parts is
called “Part Exchange.”
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-PartExchange-e_45
Ex. To erase measures (bars) 5–8
1
1
2
2
3
3
4
4
5
6
7
8
9
10
Blank measures
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-Erase-e_45
■
Correcting Notes One by One (Note Edit)
You can make corrections in a recorded performance one note at a
time. This process of making changes in individual notes is called
“Note Edit.”
• Deleting misplayed notes
• Changing the pitch of a single note
• Changing the force used in playing a single key (velocity)
• Change the fingering numbers.
Item
From
Explanation
Measure number of the first measure of the segment to
be erased
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-NoteEdit-e_45
Number of measures to be erased
When <All> is selected, all of the measures are erased.
For
Track button or part number to be erased
When <All> is selected, the same portion of all parts is
erased.
Tr/Pt
Select from the following types of performance data to
erase:
All performance data, including notes,
Change), volume changes, etc., are
All
The note-location display uses “Measure: Beat: Tick” as the format. A
tick is a unit of time that’s shorter than a beat.
erased.
Tempo data is erased. Erasing the
tempo data for all measures results in
a single, constant tempo.
Use the cursor buttons to select the part with the note to be edited. The
Part number appears at the top of the screen.
Tempo
Event
Use the [
(Bwd)] button and the [
(Fwd)] button or use
Prog.
Change
Erases the data for switching Tones (p.
109).
cursor up or down button to find the note to be corrected.
Once the note you want to edit is displayed in the center of the
Note
Erases only notes.
screen, press the [
] button to display the settings screen.
Erases all of the performance data
except for the notes.
In the settings screen, press the cursor left or right button to select the
“Note (pitch),” “Velocity (note strength),” and “Finger (fingering
number)” settings for the note.
Except Note
Erases Expression (volume change)
information.
Expression
Lyrics
Use the cursor buttons to correct the note, velocity, or fingering
Only the lyrics are removed.
number. If you want to delete the note, press the [
] button.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
■ Modifying the Tone Changes in a Song
Saving the Notation Data in BMP
Format
them to USB memory (sold separately). You can also use saved image
data to your computer.
(PC Edit)
In some songs, the instrument sound changes during the course of the
an instruction to switch the Tone is inserted at the place where you
want the sound to change. This instruction is called a “Program
Change” (PC), and actions such as deleting program changes, or
changing the selected Tone by them are called “PC Edit.”
* You cannot save copyrighted song data.
that are output without the permission of the copyright holder is
prohibited by law.
* It is not possible to insert a program change into a measure or
beat that does not contain a program change.
*
files, refer to “Changing the Notation Screen Settings” (p. 99).
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-PCEdit-e_45
1. Connect the USB memory to the External Memory
connector.
2. Select the song you want to save (p. 41, p. 44).
When making notation data from a song you have performed,
first record the song ahead of time (p. 69).
3. Press the [
(Notation)] button one or more times to
display a screen like the following.
fig.d-Score1+Options-e_45
The PC-location display uses “Measure: Beat: Tick” as the format.
A tick is a unit of time that’s shorter than a beat.
Use the cursor buttons to select the part with the program change to
be edited. The Part number appears at the top of the screen.
Use the [
(Bwd)] button and the [
(Fwd)] button or use
cursor up or down button to find the program change to be edited.
Once the Program Change you want to edit is displayed in the center
of the screen, press the [
] button to display the settings screen.
4. Press the [ ] button; the “Notation Menu” screen is
In the settings screen, press a tone button to select a tone group, then
select a tone with the cursor buttons.
displayed.
5. Press the cursor buttons to select <BMP Export>, then press
When selecting Part 10 or 11, select the drum set or effect sound.
the [
] button.
If you want to delete the Program Change, press the [
] button.
A message screen appears.
6. After reading the message, press the [
] button.
The following screen appears when you select a copyrighted
song. When this screen appears, press the [ ] button at this
point to return to Step 2 and select a different song.
fig.d-BMPExport2-e_45
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
A screen like the one shown below appears.
fig.d-BMPExport1-e_45
7. Press the cursor left or right button to select the item, then
press the cursor up or down button to set the range to be
saved.
Item
Setting
Explanation
Start
Measure
Selects the measure from which
output starts.
Song Top–
Selects the measure from which
output ends.
End Measure
Direction
–Song End
Portrait,
Landscape
Selects the orientation for output of
the notation.
8. Press the [ ] button.
The notation is saved to the USB memory as image data in BMP
(bitmap) format.
Do not remove the USB memory while “save” is in progress.
NOTE
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Other Devices
Connecting to Audio Equipment
You can connect audio devices to play the sound of the HPi-7S
* When connection cables with resistors are used, the volume
through the speakers of your audio system, or to record your
performance on a tape recorder or other recording device.
level of equipment connected to the input jacks may be low. If
this happens, use connection cables that do not contain
resistors.
Use phone plug audio cables (sold separately) to make connections.
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
■ Connecting Speakers to the HPi-7S and
■ Playing Sounds from Audio Equipment
Outputting Sounds
Through the HPi-7S
Audio Cable
Audio Cable
Output (Line Out) jacks
Audio Set etc.
RCA pin-type Input jacks are
located to the lower right of the
front.
They provide a convenient way to
connect portable audio devices.
Input (Line In) jacks
Speaker etc.
1. Turn the volume all the way down on the HPi-7S and on
1. Turn the volume all the way down on the HPi-7S and on
the speaker you’re about to connect.
the audio device you’re about to connect.
2. Turn off the power to the HPi-7S and the speaker.
3. Use audio cables (sold separately) to make the connection.
4. Switch on the HPi-7S.
2. Turn off the power to the HPi-7S and the audio device.
3. Use audio cables (sold separately) to make the connection.
4. Switch on the audio device.
5. Switch on the connected speaker.
5. Switch on the HPi-7S.
6. Adjust the volume level on the HPi-7S and the connected
6. Adjust the volume level on the audio device.
speaker.
The sounds from the connected audio device are played by the
HPi-7S.
When you play the HPi-7S’s keyboard, the sound is played from
the connected speakers.
Turning Off the Power
Turning Off the Power
1. Turn the volume all the way down on the HPi-7S and on
the audio device you’re about to connect.
1. Turn the volume all the way down on the HPi-7S and on
the speaker you’re about to connect.
2. Turn off the HPi-7S.
3. Turn off the audio device.
2. Turn off the connected speaker.
3. Turn off the HPi-7S.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Other Devices
Connecting to MIDI Devices
By connecting an external MIDI device and exchanging performance
data, you can control one device from the other. For instance, you can
output sound from the other instrument or switch Tones on the other
instrument.
■ Producing Sounds from a MIDI Sound
Module by Playing the HPi-7S
What's MIDI?
MIDI, short for “Musical Instrument Digital Interface,” was
developed as a universal standard for the exchange of
performance data between electronic instruments and computers.
The HPi-7S is equipped with MIDI connectors to let it exchange
performance data with external devices. These connectors can be
used to connect the HPi-7S to an external device for even greater
versatility.
■ Playing the HPi-7S with a MIDI Sequencer/
Recording the HPi-7S’s Performance Data to
a MIDI Sequencer
MIDI Cable
MIDI
OUT
THRU
IN
MIDI Sound Generator
Making the Connection
1. Turn the volume all the way down on the HPi-7S and on
the MIDI device you’re about to connect.
2. Switch off the power to the HPi-7S and the MIDI device
you’re about to connect.
3. Use a MIDI cables (sold separately) to connect the MIDI
MIDI Cable
connectors to each other (see illustration).
device.
5. Adjust the volume level on the HPi-7S and the connected
OUT
MIDI
IN
MIDI device.
Roland MT Series
6. You should also set the MIDI settings as needed.
→ For details on the MIDI-related settings, refer to p. 108.
When the HPi-7S is connected to a MIDI sequencer, set it to
“Local Off.” Refer to “Disconnecting the Internal Sound
Generator and Keyboard (Local Control)” (p. 108).
NOTE
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Other Devices
■ Selecting the Transmit Channel
(Transmit Channel)
This parameter sets the MIDI channel for transmissions from the HPi-
7S. MIDI uses what are called “MIDI channels,” numbered 1–16.
Making MIDI-Related Settings
Here’s how you can set the transmit channel and other MIDI-related
settings.
Connecting to MIDI devices and setting the HPi-7S to the MIDI channel
for each device allows you to output sounds and switch tones. When
the HPi-7S is set to Dual performance (p. 56), data is transmitted only
of the channel set here.
1. Press the [Function] button.
2. Press the cursor buttons to select <MIDI>, then press the
[
] button.
The HPi-7S receives all channels 1–16.
The “MIDI” screen has two pages.
Item
Explanation
Setting
1–16
Chooses the MIDI send
channel.
Transmit Channel
■ Disconnecting the Internal Sound Generator and
Keyboard (Local Control)
When you have a MIDI sequencer connected, set this parameter to
Local Off. Since the Thru function of your sequencer will normally be
turned on, notes played on the keyboard or played back by the
recorder will be transmitted to the sound generator by the two routes
(1) and (2) shown in the illustration, causing notes to be sounded in
duplicate or to be cut off unnaturally. To prevent this, the setting called
“Local Off” is used to disconnect the route in (1).
Local On
(1)
Sequencer
Memory
MIDI
OUT
MIDI
IN
Sound
Generator
MIDI
OUT
MIDI
IN
3. Press the cursor buttons to select the setting you want to
make.
Soft Thru On
(2)
Each note played is sounded twice
Item
Explanation
Local On: The keyboard and recorder are connected to the internal
Transmit Channel
Local Control
Chooses the MIDI send channel.
Switches Local Control on or off.
sound generator.
Sound is emitted
Specifies whether a recorded performance
will be transmitted to a MIDI device.
Composer Out
Bank Select MSB
Bank Select LSB
Chooses Bank Select MSB messages.
Chooses Bank Select LSB messages.
Sound Generator
Local On
Chooses Program Change messages
(Program Numbers).
Program Change
4. Press the cursor up or down button, or [-] [+] button to
Local Off: The keyboard and recorder are not connected to the
internal sound generator. No sound will be produced by
the keyboard when it is played.
change the setting.
5. Press the [ ] button.
Press the [
] button one or more times to return to the Notation
No sound produced
screen.
Sound Generator
Local Off
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Other Devices
→ When a Roland MT series instrument is connected, it is not
necessary to make the Local Off setting. The MT transmits a Local
Off message when the power is turned on. If you turn on the
power in the order of the HPi-7S → MT series, Local Off will be
set automatically.
Connecting a Computer
The following become possible once you connect a USB cable
(available separately) between the USB connector located to the lower
left of the HPi-7S and the USB connector of your computer.
Item
Explanation
Setting
On, Off
• You can use the HPi-7S to play sounds from SMF music files
played back with MIDI software.
Switches Local Control on or
off.
Local Control
• By exchanging MIDI data with sequencer software, you can save
songs recorded with the HPi-7S to your computer, and enjoy a
variety of musical control and editing features.
■ Sending Recorded Performance Data to a
MIDI Device (Composer Out)
When Composer Out is active, you can send performance data
recorded with the HPi-7S to a connected MIDI device or computer.
Connect the HPi-7S to your computer as shown below.
When you turn on the power, this is set to “Off” (data is not sent).
If you want a performance recorded on the HPi-7S to be transmitted to
an external MIDI device or computer, turn the “Composer Out” setting
“On.” If this is “Off,” performance data will not be transmitted.
Item
Explanation
Setting
On, Off
Specify whether a recorded
performance will be transmitted
to a MIDI device.
Composer Out
■ Sending Tone Change Messages (Program
Change/Bank Select MSB/Bank Select LSB)
A Program Change is a message that means “change to the Tone of
the specified number.” The device that receives this changes to the
Tone of the corresponding number.
USB Cable
USB
When you choose a Program Change message (Program Number),
the Program Number will be transmitted to the MIDI device connected
to the HPi-7S. The MIDI device that receives the Program Number
changes the tone to the corresponding Program Number.
Connector
Computer
* Refer to the Roland website for system requirements.
Roland website: http://www.roland.com/
Normally, the Tone is selected from the 128 Tones available. Some
MIDI devices, however, have more than 128 Tones. With such
devices, the Tone is selected through a combination of Program
Change messages and Bank Select messages. There are two parts of
a Bank Select message: the MSB (Controller 0, with a value of 0–127)
and the LSB (Controller 32, with a value of 0–127).
If connection to your computer is
unsuccessful...
Normally, you don’t need to install a driver in order to connect the
HPi-7S to your computer. However, if some problem occurs, or if the
original driver, refer to the Roland website.
Some MIDI devices cannot use bank select messages.
Alternatively, some devices may use bank select messages,
but ignore the LSB message.
NOTE
Item
Explanation
Setting
0 (00h)–
127 (7Fh)
Roland website: http://www.roland.com/
Bank Select MSB
Transmit the bank select MSB.
0 (00h)–
127 (7Fh)
Specify the USB driver you want to use, and then install the
Bank Select LSB
Program Change
Transmit the bank select LSB.
driver. For details, refer to “Making the Settings for the USB
Driver.”(p. 110)
Transmit the program
number.
1 (00h)–
128 (7Fh)
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Other Devices
Making the Settings for the USB
Driver
Normally, you don’t need to install a driver in order to connect the
HPi-7S to your computer. However, if some problem occurs, or if the
performance is poor, using the Roland original driver may solve the
problem.
Caution
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
• Only MIDI data can be transmitted using USB.
• USB cables are not included. Consult your Roland dealer if
you need to purchase.
Specify the USB driver you want to use, and then install the driver.
1. Press the [Function] button.
• Turn on the power to the HPi-7S before starting up MIDI
applications on the computer. Do not turn the HPi-7S on or
off while any MIDI application is running.
The Functions screen appears.
2. Press the cursor buttons to select <USB Driver>, then press
the [
] button.
The “USB Driver” screen appears.
3. Press the cursor up or down button to select the USB
driver.
Item
Explanation
Choose this if you want to use the standard USB
driver that was included with your computer.
Normally, you should use this mode.
Generic
Choose this if you want to use a USB driver
downloaded from the Roland website.
Original
4. Turn the HPi-7S’s volume to the minimum level, switch off
the power, then turn it back on again.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect external devices to both the external display
connector and the Video Out connector at the same time.
Doing so may cause the display to appear strange, or may
cause malfunction.
Connecting an External Display
or Television
NOTE
You can connect a computer monitor or other external display or a
television to the HPi-7S, enabling you to display the Panel, Slide show
or Notations on a larger screen.
3. Switch on the HPi-7S (p. 18).
4. This sets the display format (p. 112).
5. Switch on the connected display.
■ Connecting an External Display
For more on handling the external display, refer to your
display’s owner’s manual.
HD D-Sub type
(Mini)
HD D-Sub type
(Mini)
■ Connecting a Television
Display Cable
Jack Panel
Ext Display Connector
External Display
Video Cable
Jack Panel
Displays That Can Be Connected to This
Instrument
Video Out jack
Television
In general, a great many of the VGA monitors and
multiscan monitors that are available on the market are
compatible with this instrument. However, before you
connect any monitor, make sure it meets the following
specifications:
Making the Connections
To prevent malfunction and/or damage to speakers or other
NOTE
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
Resolution
640 x 480 pixels
31.5 kHz
Horizontal scan frequency
Vertical scan frequency
Connector
60 Hz
connected.
3-row, 15-pin D-Sub type
Analog
2. Connect your display to the HPi-7S.
Signal
Use a video cable (sold separately) to connect the HPi-7S’s Video
Out jack with the television’s video input jack.
Confirm that the display to be used is compatible with the
frequencies mentioned above. Using a display that is not
compatible with the above frequencies may result in
incorrect image output when images move, and in certain
cases may even damage the display.
3. Turn on the power to the HPi-7S ( p. 18).
4. This sets the display format (p. 112).
5. Turn on the power to the television.
NOTE
Making the Connections
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
NOTE
power on all devices before making any connections.
1. Turn off the power to the HPi-7S and the display to be
connected.
2. Connect your display to the HPi-7S.
Use display cable (sold separately) to connect the display to the
Ext Display connector on the HPi-7S.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Other Devices
~ Image-related settings ~
Displaying Favorite Images on an
External Display or Television
(Slide Show)
With the HPi-7S, you can display desired image data saved to USB
memory on a connected external display or television screen.
External Display and the
Television (External Display)
You can also use VIMA CD-ROMs (VIMA TUNES) sold by Roland.
This selects the content shown on the external display or the television
connected to the HPi-7S.
This allows you to display slide shows contained on CD-ROMs on a
display or television at the same time that songs are played back.
Refer to “Making the Settings” (p. 86) for instructions.
Preparing the Images to be Displayed
Prepare the desired image data on your computer and save the data
to the USB memory.
■ Display Content
Your television or external display can show an image that’s different
1. Prepare the desired image data with your computer.
from what’s shown on the instrument’s display.
Image Data That Can Be Displayed
Setting
Panel
Explanation
Size
640 x 480 pixels (recommendation)
BMP format, JPEG format
“.bmp”, “.jpg”
Screens are shown the same way they appear
in the HPi-7’s display.
Format
Extension
You’ll be able to view the notation on a screen
that’s larger than the built-in display.
Notation
Slide Show
The image is displayed in the slide show.
2. Connect the USB memory to your computer, then create a
folder named “_PICTURE” in the USB memory.
■ Display Method
Specify the display method as appropriate for the device you’ve
3. Place the images you want to display in the “_PICTURE”
folder.
You can have images be displayed in the order you prefer
by changing the file names. By adding a number from 001
through 999 to the six- to eight-character file name, you
can have the files be displayed according to their
numerical order.
connected.
Setting
VGA
Explanation
Choose this if you’ve connected an external
display.
The folder named “_PICTURE” is not shown in the Song
Select screen.
NOTE
NOTE
NTSC
PAL
Choose this if you’ve connected a television.
Some images may not be displayed in the slide show if
500 or more files, including images, are contained in a
single folder.
■ Setting the Duration for Displaying Images
(Slide Show Interval)
You can specify the interval at which images will change when you
Running Slide Shows Through a
1. Make sure the power to the HPi-7S is turned off, then
play back a slide show.
connect the external display or television (p. 111).
Setting
2–60
2. Turn on the power to the HPi-7S and the external display
(or television).
(p. 112).
4. Connect the USB memory containing the saved images you
want to display to the Ext Memory port.
5. Change the content show (Display Content) in the external
display, make the settings for the slide show to appear in
the external display or television(p. 112).
The slide show appears in the external display or television
screen.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
If you think there’s a problem, read this first.
Case
Cause/Remedy
Case
Cause/Remedy
into different power outlets?
When connecting external devices, always draw
power from the same outlet.
Low hum coming
from external
device
The power
doesn’t come on
Is the power cord connected and plugged in
correctly? (p. 17)
Is Panel Lock activated? (p. 98)
The HPi-7S can be set so that the demo begins
playing automatically after the instrument has
remained idle for five to ten minutes.
Switch this setting (Auto Start) to “Off.”
Refer to “Setting the Demo (Auto Demo)” (p. 93).
The button
doesn’t work
Hold down the One Touch [
press the [Count/Marker] button to turn off the
Panel Lock function.
Performance
begins suddenly
The HPi-7S uses a liquid-crystal screen, so text may
not be displayed when the ambient temperature is
below freezing.
Can’t select a tone
No sound is heard
Nothing appears
on screen
Is the music rest (screen) connection cable
connected correctly? (p. 16)
Is the volume level of the HPi-7S (p. 18) or
connected device turned all the way down?
Is Panel Lock activated?(p. 98)
While Panel Lock is on, the screen display and the
indicators for all buttons are turned off.
Are headphones plugged in?
Has a plug remained connected to the Phones
jack? (p. 18)
keyboard’s speaker stops playing.
Vertical lines
appear in the
screen/Color is
“washed out” at
the edges of the
screen
These occur due to the nature of a liquid crystal
can be minimized by adjusting the brightness of
the screen (p. 20).
No sound is
heard
Could the “Balance” setting be set all the way
toward “Accomp” or “Keyboard”? (p. 61)
Has Local Control been set to “Off”?
When Local Control is set to Off, no sound is
produced by playing the keyboard. Set Local
Is the pedal connected correctly?
Make sure the pedal cord extending from the stand
is securely connected to the pedal jack on the
Is V-LINK switched on? (p. 98)
Has a different function been assigned to the
pedal?
See “Changing the Pedal Functions (Pedal)”
(p. 91).
No sound from
left-hand section
left end of the keyboard are used to control
images, and no sounds are played with these keys.
Depressing a
pedal has no
effect, or the
pedal effect
doesn’t stop
Have all devices been switched on? (p. 107)
Normal pedal operation is automatically enabled
No sound is
(p. 50).
] button is pressed
(p. 107)
heard (when a
MIDI instrument is
connected)
Is the HPi-7S set to Twin Piano?
The pedal functions are changed automatically
when the Twin Piano function is on (p. 34).
Does the MIDI channel match the connected
instrument? (p. 108)
No sound is
heard when the
keyboard is
played
Has Local Control been set to “Off”?
When Local Control is set to Off, no sound is
produced by playing the keyboard, Set Local
Control to On (p. 108).
Adjust the adjuster underneath the pedal so that
the pedal presses firmly against the floor surface
(p. 29).
The pedal rattles
Could you be using a connection cable that
contains a resistor?
The maximum number of notes that the HPi-7S can
play simultaneously is 128. Frequent use of the
damper pedal when playing along with a song
may result in performance data with too many
notes, causing some notes to drop out.
Not all played
notes are
sounded
The volume level
of the instrument
connected to
Input jacks is too
low
If you use a connecting cable that contains a built-
in resistor, the volume of the device connected to
the Input connector may be very low. In such
cases, please use a connecting cable that does not
contain a resistor (such as one from the Roland
PCS series).
The sound is strange
Is the HPi-7S in Dual performance? (p. 56)
Sounds are heard
twice (doubled)
when the
keyboard is
played
Unable to read
from/write to
USB memory
Are you using (optional) Roland memory?
Reliable performance cannot be guaranteed if you
use non-Roland memory products.
When the HPi-7S is connected to an external
sequencer, set the Local Control to off (p. 108).
Alternatively, the sequencer could be set so its Soft
Thru feature is Off.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Case
Cause/Remedy
Case
Cause/Remedy
Have you set Transpose? (p. 68)
When listening through speakers:
Playing at loud volumes may cause instruments
near the HPi-7S to resonate. Resonation can also
occur with fluorescent light tubes, glass doors, and
other objects. In particular, this problem occurs
more easily when the bass component is
increased, and when the sound is played at higher
volumes. Use the following measures to suppress
such resonance.
•Place speakers so they are 10–15 cm from walls
and other surfaces.
•Reduce the volume.
•Move the speakers away from any resonating
objects.
The tuning or
pitch of the
keyboard or song
is off
Are the settings for the “Temperament” (p. 88) and
“Stretch Tuning” (p. 87) correct?
Is the setting for the “Master Tuning” correct?
(p. 88)
The bass range
sounds odd, or
there is a
vibrating
resonance
Tone buttons [String] [Voice] [Others] also operate
as buttons that select “Recommended Tones.”
With the factory settings, connecting a
commercially-available CD-ROM drive to the
from a CD-ROM produced for the VIMA (VIMA
TUNES) will automatically cause sounds
The wrong
instrument is
selected when
you press the
[String], [Voice],
[String], [Voice], or [Others] Tone buttons, so that
When listening through headphones:
Here, a different cause would be suspect. Consult
your Roland dealer or nearest Roland Service
Center.
or [Others] button you can select “recommended” tones by pressing
one of these buttons.
You can also make settings so that
“recommended” tones are not automatically
assigned (p. 96).
Song doesn’t play back correctly
Does the screen indicate message, like “OK to
delete Song?” (p. 42)
Song doesn’t play The internal songs cannot be played back while
Volume of
keyboard is too
low
Could the “Balance” setting be set all the way
toward “Accomp”? (p. 61)
back
recorded performance data remains in the HPi-
7S’s memory. Try playing back the song after
deleting the performance data.
When a performance made along with a Music
Files tune has been recorded, recording the
performance to button [1/User] may make the
Tones for buttons [3/Left] and [4/Right] change as
well.
The Tone has
changed
Is the indicator for the Track button extinguished?
Only the sound of (p. 59, p. 73, p. 94)
a particular
instrument in a
song does not
play
If the button indicator is out, the music on that track
is not heard. Press the track button so the indicator
is illuminated.
Or cancel the mute in the “16-track Sequencer”
screen.
Since the HPi-7S’s piano sounds faithfully
reproduce the sense of spaciousness and
reverberation of an actual acoustic piano’s sound,
a certain amount of reverberation is still
perceptible, even with the reverb effect
deactivated.
Reverberationstill
audible even with
Reverb turned off
Some music files may contain settings that stop
playing back at a point partway through the song.
Pressing the [
(Reset)] button
doesn’t return to
the beginning of
the song
Press the [
(Reset)] button several times more to
On an acoustic piano, notes in the upper one and
a half octaves of the keyboard continue to sound
until they decay naturally, regardless of the
return to the beginning of the tune.
In the upper
range, the sound
Has a Marker placed in the song? (p. 66)
damper pedal. There is a difference in the timbre
changes abruptly as well. Roland pianos faithfully simulate such
The [
(Bwd)] and [
(Fwd)] buttons are
beyond a certain
key
characteristics of the acoustic piano. On the HPi-
7S, the range that is unaffected by the damper
pedal will change depending on the Key
Transpose setting.
ignored while music files is being read in. Wait
until processing finishes.
The [
and [
buttons don’t
work
(Bwd)]
(Fwd)]
If you attempt to play back performance data that
contains more data than the entire capacity of the
HPi-7S’s memory, you may find that operations
other than playback (such as rewind or fast
forward) become unavailable.
When listening through headphones:
Some of the more flamboyant and effervescent
piano tones feature an ample high-end
component, which may make the sound appear to
have metallic reverberation added. Since this
reverberation becomes particularly audible when
supplemented by heavy reverb, you may be able
to diminish the problem by reducing the amount of
reverb applied to the sound.
There is a slight
delay before
playback of a
song on USB
memory starts
There are two types of SMF music files: format 0
and format 1. If the song uses SMF format 1 data,
there will be a slight delay until playback starts.
Refer to the booklet that came with the music files
you’re using to determine the format type.
A High-pitched
whine is
produced
With some music files, the lyrics cannot be
displayed correctly.
When listening through speakers:
Here, a different cause (such as resonance
produced by the HPi-7S) would be suspect. Consult
your Roland dealer or nearest Roland Service
Center.
Lyrics are not
indicated
properly in the
display
In the notation screen, some lyrics or notes could
extend beyond the edges of the screen, and not be
displayed.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Case
Cause/Remedy
Case
Cause/Remedy
performance data, notes will not be displayed in
the notation. Change the part that is displayed (p.
99).
Can’t record
Has one of the track buttons for recording been
selected? (p. 73, p. 75, p. 77)
It is not possible to record while the notation is
being generated. Once the unit has finished
generating the notation (i.e., when the measure
number in the screen is no longer highlighted), try
the operation once again.
Notation is not
indicated
properly in the
display
The notation screen feature is particularly
unsuitable for the display of difficult, complex
musical works that demand accurate notation.
Refer to “Some Notes on the Notation Screen” (p.
27).
Can’t record
If you select an internal song in which the tempo
changes during the song, and then record, the
performances that are recorded on the other
tracks. The tempo of the metronome will also
change in the same way.
In the notation screen, some lyrics or notes could
displayed.
There may be times when a complex variety of
information is being displayed or when a large
amount of data is displayed at one time. Change
the notation display settings as described below.
•Set “Color Notation” to “Off” (p. 99)
•Set “Keyboard” to “Off” (p. 26)
Tempo of
recorded song or
metronome is off
Movement of
notation or
keyboard display
not smooth
If you record additional material without erasing
the previously recorded song, the song will be
recorded at the first-recorded tempo. Please erase
(p. 76).
In certain cases, such as when playing the songs
on USB memory, the song may lag when excessive
amounts of performance data are used.
Song becomes
unstable
Any performance that has been recorded is
deleted when the power to the HPi-7S is turned off
or a song is selected. A performance cannot be
restored once it’s been deleted.
Be sure to save it on an USB memory or “Favorites”
(HPi-7S Memory) before you turn off the power (p.
80).
The recorded
performance has
disappeared
Demo song not
playing
Could <BGM>, an “Auto Demo” setting, be
switched off (p. 93)?
The song name will not be shown if the song
information in the file is empty or consists only of
spaces.
Can’t play back a
song saved in
USB memory
About the audio file
Is the filename extension “MID”?
Files with other file name extensions cannot be
handled as song data.
Is the audio file in a format supported by the HPi-
7S?
Audio files of the following format can be played
back.
•File extension “WAV”
•16-bit linear
Can’t play back
an audio file
Has the song name data (Sequence/Track Name
Meta Event) been entered in the file?
Song titles are not displayed if the song name data
is blank or consists exclusively of spaces.
•“44.1 kHz” sampling rate
Titles of songs on
USB memory or
floppy disks not
being displayed
Can’t record
along with an
audio file
Is the file name no more than eight single-byte
characters?
The HPi-7S can’t record using audio files or copy
them into “Favorites”.
Is “MID” used as the extension?
The song cannot be treated as song data if a
different extension is used.
Can’t copy an
audio file into
“Favorites”
Volume of
Could the “Balance” setting be set all the way
toward “Keyboard”? (p. 61)
accompaniment
or internal song is
too low
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message
Indication
Meaning
Error: 1
You can only read the music file. It can not be saved.
An error occurred during writing.
The storage media’s protect tab may be in the “Protect” (writing prohibited) position, or the storage media may
not yet be initialized.
Error: 2
No storage media is inserted.
Insert the storage media and try again.
Error: 10
Error: 11
There is not sufficient free memory in the save destination.
Either insert other storage media or delete unneeded files and try again.
An error occurred during writing. The storage media may be corrupted.
Error: 14
Error: 15
The file is unreadable. The data format is not compatible with the HPi-7S.
Data was not called up in time for playback of the song.
Error: 16
Error: 17
After waiting several seconds, you may be able to play back the song by pressing the [
again.
(Play/Stop)] button
The selected image data cannot be displayed.
Prepare image data that can be used with the HPi-7S (p. 92).
This audio format is not supported.
Please use 44.1 kHz 16-bit linear WAV format audio files.
Error: 18
Error: 30
Error: 40
The internal memory capacity of the HPi-7S is full.
The HPi-7S cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the HPi-7S.
A MIDI cable has been disconnected.
Connect it properly and securely.
Error: 41
Error: 43
A MIDI transmission error has occurred.
Check the MIDI cable and connected MIDI device.
There may be a problem with the system.
Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the Roland
service center.
Error: 51
Error: 65
The External Memory connector was subjected to excessive current.
Make sure that there is no problem with the external media, then turn the power off, then on again.
* External Media: USB memory and floppy disk etc.
Press [ ] button, and you can cancel the error message.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone List
Vibra Bells
Hard Clav.
Soft Clav.
Reso Clav.
Phase Clav.
Analog Clav.
Pop Celesta
Pop Vibe.
Soft Marimba
Balafon
Oboe
HollowReleas
Dat Accent
Bap Accent
Dat & Bap
Thum Voice
Fantasia
Nylon+Steel
12str Guitar
Overdrive Gt
Rock Rhythm
Hawaiian Gt.
DR POP
[Piano]
Clarinet
Superior Grd
Superior+Str
NaturalGrand
Natural Hps.
MagicalPiano
Superior+Pad
Superior+Cho
NaturalMello
Natural Gnd2
MellowPiano2
DetunedPiano
Honky-tonk
Orchestra
Orchestra 2
Harp Strings
Warm Strings
Slow Strings
Oct Strings
PizzicatoStr
Timpani
OrchestraHit
Warm JP Str
Bell Strings
Choir Str
Soft Pad
DR ROCK
Org Bells
DR JAZZBRUSH
Fretless Bs.
Fingered Bs.
Picked Bs.
Harpvox
Pop Voice
Steel Drums
Tubular-bell
Santur
Voice Oohs
Doos Voice
SynVox
Slap Bass
Nylon Gt.o
Ukulele
Kalimba
Mellow Choir
Choir Oohs
Choir Aahs
Decay Choir
Fantasia 2
New Age Pad
Warm Pad
P5 Poly
Piano Str2
Slow Violin
Contrabass
Strings 2
Steel Vox
Piano Choir
NaturalC.Hps
Harpsichord2
Ballad Piano
PianoStrings
Rock Piano
Mellow Gt.
Open Hard
Muted Gt.
[Organ]
ChurchOrgan1
ChurchOrgan3
Nason flt 8'
Theater Org.
Rotary Organ
Mellow Bars
Jazz Organ1
German Acco.
Full Organ 1
Lower Organ1
Rock Organ1
ChurchOrgan2
Organ Flute
Trem.Flute
SlowStrings2
Legato Str
DecayStrings
Decay Str2
Syn.Strings1
Syn.Strings2
OB Strings
Euro Hit
Muted Gt.2
Muted Dis.Gt
DistortionGt
Feedback Gt2
Rock Rhythm2
Power Guitar
Power Gt.2
5th Dist.
Dazed Guitar
Acid Guitar
Banjo
Koto
Shamisen
Wood Bass
W.Bass+Ride
Mute PickBs.
Mr.Smooth
Synth Bass 1
Synth Bass 2
SynthBass101
Jungle Bass
Modular Bass
WireStr Bass
ResoSH Bass
SH101 Bass
DR ROOM
DR POWER
DR ELECTRO
DR TR-808
DR DANCE
DR JAZZ
Bright Piano
Air Grand
Bell Piano
UprightPiano
Honky-tonk 2
Grand Piano1
MellowPiano1
Grand Piano2
Mono Piano
Piano 1
Poly King
Heaven II
Warm SquPad
JP8 Sqr Pad
Sweep Pad 2
Decay Pad
Crystal
Clear Bells
Soft Crystal
Digi Bells
Nylon Harp
Nylon + EP
Brightness
Syn.Square
CC Solo
Dual Sqr&Saw
SquareWave2
FM Lead 1
LM Square
JP8 Square
Mg Lead
Waspy Synth
P5 Saw Lead
Natural Lead
Rhythmic Saw
JP8 Pulse
LM PureLead
Cheese Saw
Reso Saw
2600 SubOsc
RAVE Vox
6th Hit
Bass Hit
TromboneSoft
Trombone 2
GS Tuba
Trumpet
Piano 2
Piano 3
Bandoneon
Harmonica
MutedTrumpet
Fr.Horn Solo
French Horn
Alto Sax
Pipe Organ 1
Pipe Organ 2
Jazz Organ2
Jazz Organ3
Jazz Organ4
Organ Bass
Full Organ 2
Full Organ 3
Full Organ 4
Lower Organ2
Rotary Org.S
Rotary Org.F
Rock Organ2
Pop Organ
Metalic Org.
VS Organ
Digi Church
Accordion
BrightAccord
Organ 1
Organ 2
[E.Piano]
Grow Sax
Tenor Sax
GS Bari Sax
AltoSax + Tp
BrassSection
Brass 1
Brass 2
Bright Brass
Brass ff
St. Brass ff
Synth Brass1
Synth Brass2
Synth Brass3
Soft Brass
Oct SynBrass
Bassoon
English Horn
Piccolo
Pan Flute
Pop E.Piano
Vintage EP
E.Piano 1
E.Piano 2
Morning Lite
Vibraphone
Marimba
Mallet Isle
70's E.Piano
Tremolo EP
60's EP2
Clav.
Jazzy Vib+Gt
Celesta
DR BRUSH
DR ORCHESTRA
DR GS STAND
DR GS ROOM
DR GS BRUSH
Piano 1
Vibe Tr.
Marimba Tr.
Stage EP
FM Lead 2
Fat & Perky
Big Panner
Ai-yai-a
Echo Pan 2
Falling Down
RandomEnding
E.Piano 3
St.FM EP
GS Pan Flute
Recorder
Blow Pipe
Bottle Blow
Shakuhachi
Ocarina
E. Grand
Piano 1w
[Strings]
Music Box
Glockenspiel
Xylophone
Soft E.Piano
Hard EP2
Piano 1d
Rich Strings
Mellow Str
Bright Str
St. Harp
ChamberWinds
Flute
EX Trumpet
Blow Sax
Strings
Velo Strings
Violin
Cello
Power Brass
Soprano Sax
Piano 2
Piano 2w
Piano 3
Piano 3w
[Others]
Nylon Guitar
Steel Guitar
Jazz Guitar
JC E.Guitar
60's E.Piano
Mild E.Grand
Mild E.Piano
Hard E.Piano
Hard FM EP
FM+SA EP
MIDI Piano1
MIDI Piano2
EG+E.Piano 1
EG+E.Piano 2
GS Honkytonk
Honky-tonk 2
GS E.Piano1
GS E.Piano2
60's E.Piano
E.Piano 1v
E.Piano 2v
Detuned EP 1
Detuned EP 2
[Voice]
Aerial Choir
Jazz Scat
Rich Choir
Boys Choir
Glasswaves
Holy Voices
Glittery Pad
DR STANDARD
SOUND EFFECT
Acoustic Bs.
A.Bass+Cymbl
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone List
GS Harpsi.
Coupled Hps.
Harpsi.w
PizzicatoStr
GS Harp
Brightness
Goblin
Echo Drops
Echo Bell
Echo Pan
Star Theme
Sitar
Sitar 2
Banjo
GS Shamisen
Koto
Taisho Koto
Kalimba
Bagpipe
Fiddle
Shanai
Tinkle Bell
Agogo
Steel Drums
Woodblock
Castanets
Taiko
Piano 1*
Tenor Sax*
BaritoneSax*
Oboe*
Piano 2*
Timpani
Piano 3*
Harpsi.o
GS Strings
Orchestra
GS Sl.Str
Syn.Strings1
Syn.Strings2
Syn.Strings3
Choir Aahs
Choir
Pop Voice
SynVox
OrchestraHit
GS Trumpet
GS Trombone
Trombone 2
GS Tuba
Honky-tonk*
E.Piano 1*
E.Piano 2*
Harpsichord*
Clav.*
EnglishHorn*
Bassoon*
Soft Clav.
Celesta
Clarinet*
GS Glocken
GS Music Box
Vibraphone
Vibe.w
GS Marimba
Marimba
Piccolo*
Flute*
Celesta*
Glocken*
Recorder*
Pan Flute*
Bottle Blow*
Shakuhachi*
Whistle*
Music Box*
Vibraphone*
Marimba*
Xylophone*
Tubularbell*
Santur*
Xylophone
Tubular-bell
Church Bell
Carillon
Ocarina*
Square Wave*
Saw Wave*
Doctor Solo*
SynCalliope*
ChifferLead*
Charang*
Solo Vox*
5th SawWave*
Bass & Lead*
Fantasia*
GS Santur
Organ 1*
Organ 2*
Organ 1
Organ 2
MutedTrumpet
French Horn
Fr.Horn 2
Brass 1
Pop Organ 1*
Rock Organ2*
ChurchOrg.1*
Reed Organ*
AccordionFr*
Harmonica*
Bandoneon*
Nylon-strGt*
Steel-strGt*
Jazz Guitar*
Clean Gt.*
Muted Gt.*
Funk Gt.*
OverdriveGt*
Dist.Guitar*
Gt.Harmo*
Acoustic Bs*
Fingered Bs*
Picked Bs.*
Fretless Bs*
Slap Bass 1*
Slap Bass 2*
Synth Bass1*
Synth Bass2*
Rubber Bass*
Violin*
Pop Organ 1
Detuned Or.1
Detuned Or.2
GS ChurchOr1
GS ChurchOr2
Church Org.3
Full Organ 4
Jazz Organ1
Rock Organ2
Reed Organ
Accordion Fr
Accordion It
GS Harmonica
Bandoneon
GS Nylon Gt.
Nylon Guitar
Nylon Gt.o
Ukulele
Brass 2
Concert BD
Melo. Tom 1
Melo. Tom 2
Synth Drum
808 Tom
Elec Perc.
Reverse Cym.
Gt.FretNoise
Gt.Cut Noise
String Slap
Breath Noise
Fl.Key Click
Seashore
Rain
Synth Brass1
Synth Brass2
Synth Brass3
Synth Brass4
AnalogBrass1
AnalogBrass2
GS Sop.Sax
Alto Sax
Warm Pad*
Polysynth*
Space Voice*
Bowed Glass*
Metal Pad*
Halo Pad*
Sweep Pad*
Ice Rain*
Soundtrack*
Crystal*
Syn Mallet*
Atmosphere*
Brightness*
Goblin*
Tenor Sax
GS Bari Sax
GS Oboe
GS Eng.Horn
Bassoon
Clarinet
Thunder
Steel-str.Gt
12-str.Gt
GS Mandolin
Jazz Guitar
GS Hawaiian
Clean Gt.
Chorus Gt.
Muted Gt.
Funk Gt.
Funk Gt.2
Overdrive Gt
GS Dist.Gt
Feedback Gt.
Gt.Harmonics
Gt. Feedback
GS Ac.Bass
GS Fing.Bass
GS Picked Bs
Fretless Bs.
Slap Bass
Slap Bass 2
SynthBass101
Synth Bass 1
Synth Bass 2
Synth Bass 3
Synth Bass 4
Rubber Bass
GS Violin
Piccolo
Wind
GS Flute
Stream
Echo Drops*
Star Theme*
Sitar*
Recorder
Bubble
GS Pan Flute
GS BottleBlw
Shakuhachi
Whistle
Bird
Dog
Banjo*
Horse-Gallop
Bird 2
Shamisen*
Koto*
Ocarina
Square Wave
Square
Sine Wave
Saw Wave
Saw
Telephone 1
Telephone 2
DoorCreaking
Door
Viola*
Cello*
Contrabass*
Tremolo Str*
Pizzicato*
Harp*
Kalimba*
Bagpipe*
Fiddle*
Shanai*
Scratch
Tinkle Bell*
Agogo*
Windchime
Helicopter
Car-Engine
Car-Stop
Car-Pass
Car-Crash
Siren
Doctor Solo
Syn.Calliope
Chiffer Lead
Charang
Timpani*
Strings*
Steel Drums*
Woodblock*
Taiko*
Melo.Tom 1*
Synth Drum*
ReverseCym.*
Fret Noise*
BreathNoise*
Seashore*
Bird*
Telephone 1*
Helicopter*
Applause*
Gun Shot*
SlowStrings*
Syn.Str 1*
Syn.Str 2*
Choir Aahs*
Pop Voice*
SynVox*
Orche.Hit*
Trumpet*
Trombone*
Tuba*
M.Trumpet*
FrenchHorns*
Brass 1*
SynthBrass1*
SynthBrass2*
A.Brass 1*
Soprano Sax*
Alto Sax*
Solo Vox
5th Saw Wave
Bass & Lead
Fantasia
Train
Jetplane
Warm Pad
Polysynth
Space Voice
Bowed Glass
Metal Pad
Halo Pad
Sweep Pad
Ice Rain
Soundtrack
Crystal
Starship
Burst Noise
Applause
Laughing
Screaming
Punch
Heart Beat
Footsteps
Gun Shot
Machine Gun
Lasergun
Explosion
Slow Violin
Viola
GS Cello
Contrabass
GS Trem.Str
Syn Mallet
Atmosphere
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Drum/SFX Set List
* - - - - -: No sound.
* [EXC]: will not sound simultaneously with other percussion instruments of the same number.
DR POP
DR ROCK
DR STANDARD
SOUND EFFECT
21
23
24
26
28
29
31
33
35
36
38
40
41
43
45
47
R&B Snare
R&B Snare
21
23
24
26
28
29
31
33
35
36
38
40
41
43
45
47
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
21
23
24
26
28
29
31
33
35
36
38
40
41
43
45
47
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
22
Rock Snare
Rock Snare
Pop Snare m
Pop Snare Ghost
Pop Snare m
Finger Snap
707 Claps
Hand Clap
Hand Clap2
Hand Clap
Pop Pedal HH
Gospel Hand Clap
Snare Roll
Pop Kick
Pop Kick
Pop Side Stick
Pop Sanre s
Pop Snare Ghost
Pop Snare s
Pop Low Tom f
Pop CHH 1
Pop Low Tom
Pop CHH 2
Pop Mid Tom f
Pop OHH
Pop Snare m
Pop Snare m
Pop Snare m
Pop Snare Ghost
Pop Snare m
Finger Snap
707 Claps
Hand Clap
Hand Clap2
Hand Clap
Pop Pedal HH
Gospel Hand Clap
Snare Roll
Rock Kick
Rock Kick
Rock Side Stick
Rock Sanre s
Rock Snare Ghost
Rock Snare s
Rock Low Tom f
Rock CHH 1
Rock Low Tom
Rock CHH 2
Rock Mid Tom f
Rock OHH
Rock Mid Tom
Rock High Tom f
Rock Crash Cymbal
Rock High Tom
Rock Ride Cymbal 1
Pop Chinees Cymbal
Pop Ride Bell
Tambourine 2
Splash Cymbal
Cha Cha Cowbell
Chinees Cymbal
Vibra-slap 2
Pop Ride Cymbal 3
High Bongo 2
Low Bongo 2
Mute Conga
High Conga 2
Low Conga 2
High Timbale 2
Low Timbale 2
High Agogo
22
22
25
27
25
27
25
27
[EXC7]
[EXC7]
[EXC7]
[EXC7]
30
32
34
30
32
34
Slap
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Std Kick 2’
Kick 1
Side Stick
Std Snr 1
Hand Clap
Std Snr 2
Low Tom 2
Closed Hi-hat 1’
Low Tom 1
Pedal Hi-hat 1’
Mid Tom 2
Open Hi-hat 1’
Mid Tom 1
High Tom 2
Crash Cymbal 1
High Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
[EXC7]
[EXC7]
[EXC1]
[EXC1]
30
32
34
C2
C2
37
39
-----
-----
High Q
Slap
Scratch Push [EXC7]
Scratch Pull
Sticks
37
39
C2
37
39
42
44
46
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC7]
42
44
46
Square Click
Metronome Click
Metronome Bell
Guitar sliding Finger
Guitar cutting noise (up)
Guitar cutting noise (down)
String slap of double bass
Fl.Key Click
Laughing
Screaming
Punch
Heart Beat
Footsteps1
Footsteps2
Applause
Door Creaking
Door
Pop Mid Tom
Pop High Tom f
42
44
46
[EXC1]
[EXC1]
[EXC1]
C3 48
50
C3 48
50
49
51
Pop Crash Cymbal 1
Pop High Tom
Pop Ride Cymbal 1
Pop Chinees Cymbal
Pop Ride Bell
Tambourine 2
Splash Cymbal
Cha Cha Cowbell
Pop Crash Cymbal 2
Vibra-slap 2
Pop Ride Cymbal 2
High Bongo 2
Low Bongo 2
Mute Conga
High Conga 2
Low Conga 2
High Timbale 2
Low Timbale 2
High Agogo
Low Agogo
Shaker 3
Shaker 4
Short Hi Whistle
Long Low Whistle [EXC2]
Short Guiro
Long Guiro
Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo
Open Surdo
Cana
Falamenco Hi-Timbale
Falamenco Lo-Timbale
Falamenco Tmbl Flam
Shekere 1
49
51
52
52
53
53
54
56
58
54
56
58
55
55
C3 48
50
49
51
57
57
59
59
52
C4 60
62
C4 60
62
61
63
Scratch
61
63
Wind Chimes
Car-Engine
Car-Stop
Car-Pass
Car-Crash
Siren
Train
Jetplane
Helicopter
Starship
Gun Shot
Machine Gun
Lasergun
Explosion
Dog
Horse-Gallop
Birds
Rain
Thunder
Wind
Seashore
Stream
Bubble
53
54
56
58
64
64
55
65
65
66
68
70
66
68
70
57
67
67
Low Agogo
Shaker 3
Shaker 4
Short Hi Whistle
59
69
69
71
C4 60
62
71
[EXC2]
[EXC2]
61
63
Long Low Whistle [EXC2]
C5 72
74
C5 72
74
73
75
[EXC3]
[EXC3]
Short Guiro
Long Guiro
Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo
Open Surdo
Cana
Falamenco Hi-Timbale
Falamenco Lo-Timbale
Falamenco Tmbl Flam
Shekere 1
[EXC3]
[EXC3]
73
75
64
76
76
65
77
77
66
68
70
78
80
82
[EXC4]
[EXC4]
[EXC5]
[EXC5]
[EXC4]
[EXC4]
[EXC5]
[EXC5]
78
80
82
79
67
79
81
81
69
83
83
Maracas
Short Hi Whistle
Long Low Whistle [EXC2]
71
[EXC2]
C6 84
86
C6 84
86
85
87
Cat
Bird
85
87
C5 72
74
[EXC6]
[EXC6]
[EXC6]
[EXC6]
73
75
Short Guiro
Long Guiro
Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo
Open Surdo
-----
[EXC3]
[EXC3]
BabyLaughing
Boeeeen
Glass & Glam
Ice Ring
Crack Bottle
Pour Bottle
Car Horn
R.Crossing
SL 1
SL 2
Seal
Fancy Animal
Elephant
Bike
88
88
89
89
90
92
94
76
90
92
94
91
91
77
93
78
80
82
[EXC4]
[EXC4]
[EXC5]
[EXC5]
Shekere 2
Shekere 2
93
Low Bongo Mute
High Bongo Mute
-----
-----
-----
Low Bongo Mute
High Bongo Mute
-----
-----
-----
79
95
95
C7 96
98
81
96
98
C7
97
99
97
99
83
-----
-----
100
Falamenco HC
Falamenco HC
Bongo Cowbell
-----
Bongo Cowbell
-----
Falamenco HC
Falamenco HC
Bongo Cowbell
-----
Bongo Cowbell
-----
100
101
C6 84
86
101
103
105
-----
Applause
-----
-----
-----
85
87
102
104
102
104
[EXC6]
[EXC6]
103
105
88
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Drum/SFX Set List
* - - - - -: No sound.
* [EXC]: will not sound simultaneously with other percussion instruments of the same number.
DR ROOM
DR POWER
DR ELECTORONIC
DR JAZZBRUSH
21
23
24
26
28
29
31
33
35
36
38
40
41
43
45
47
R&B Snare
21
23
24
26
28
29
31
33
35
36
38
40
41
43
45
47
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
22
Pop Snare m
Pop Snare m
Pop Snare m
Pop Snare Ghost
Pop Snare m
Finger Snap
707 Claps
Hand Clap
Hand Clap2
Hand Clap
Pop Pedal HH
Gospel Hand Clap
Snare Roll
Pop Kick
Pop Kick
Jazz Snare Swing
Jazz Sanre
Pop Snare Swing
Jazz Sanre
Jazz Low Tom f
Pop CHH 1
Jazz Low Tom
Pop CHH 2
Jazz Mid Tom f
Pop OHH
Jazz Mid Tom
Jazz High Tom f
Jazz Crash Cymbal 1
Jazz High Tom
Jazz Ride Cymbal 1
Jazz Chinees Cymbal
Jazz Ride Cymbal 2
Tambourine 2
Splash Cymbal
Cha Cha Cowbell
Jazz Crash Cymbal 2
Vibra-slap 2
Pop Ride Cymbal 2
High Bongo 2
Low Bongo 2
Mute Conga
High Conga 2
22
25
27
25
27
[EXC7]
[EXC7]
30
32
34
Slap
Slap
Slap
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Kick1
Room Kick
Side Stick
Room Snr 1
Hand Clap
Std Snr 1
Room Low Tom 2’
Closed Hi-hat 1’
Room Low Tom 1’
Pedal Hi-hat 1’
Room Mid Tom 2’
Open Hi-hat 1’
Room Mid Tom 1’
Room Hi Tom 2’
Crash Cymbal 1
Room Hi Tom 1’
Ride Cymbal 1
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
[EXC7]
[EXC7]
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Std Kick 2
MONDO Kick
Side Stick
Gated SD
[EXC7]
[EXC7]
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Std Kick 2
Elec BD
Side Stick
Elec SD
Hand Clap
[EXC7]
[EXC7]
[EXC1]
30
32
34
C2
37
39
C2
37
39
42
44
46
[EXC1]
[EXC1]
[EXC1]
Hand Clap
Snare Drum 2
Room Low Tom 2
Closed Hi-hat 1
Room Low Tom 1
Pedal Hi-hat 1
Room Mid Tom 2
Open Hi-hat 1
Room Mid Tom 1
Room Hi Tom 2
Crash Cymbal 1
Room Hi Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Gated SD
Elec Low Tom 2
Closed Hi-hat 1
Elec Low Tom 1
Pedal Hi-hat 1
Elec Mid Tom 2
Open Hi-hat 1
Elec Mid Tom 1
Elec Hi Tom 2
Crash Cymbal 1
Elec Hi Tom 1
Ride Cymbal 1
Reverse Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
42
44
46
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
C3 48
50
49
51
52
53
54
56
58
55
C3 48
50
49
51
57
59
52
C4 60
62
61
63
53
54
56
58
64
55
Low Conga 2
High Timbale 2
Low Timbale 2
High Agogo
Low Agogo
Shaker 3
Shaker 4
Short Hi Whistle
Long Low Whistle [EXC2]
Short Guiro
Long Guiro
Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo
Open Surdo
Cana
Falamenco Hi-Timbale
Falamenco Lo-Timbale
Falamenco Tmbl Flam
Shekere 1
65
66
68
70
57
67
59
69
C4 60
62
71
[EXC2]
61
63
C5 72
74
73
75
[EXC3]
[EXC3]
64
76
65
77
66
68
70
78
80
82
[EXC4]
[EXC4]
[EXC5]
[EXC5]
67
79
81
69
83
Maracas
Short Hi Whistle
Long Low Whistle [EXC2]
Maracas
Short Hi Whistle
Long Low Whistle [EXC2]
Maracas
Short Hi Whistle
Long Low Whistle [EXC2]
71
[EXC2]
[EXC2]
[EXC2]
C6 84
86
85
87
C5 72
74
[EXC6]
[EXC6]
73
75
Short Guiro
Long Guiro
Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo
Open Surdo
-----
[EXC3]
[EXC3]
Short Guiro
Long Guiro
Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo
Open Surdo
-----
[EXC3]
[EXC3]
Short Guiro
Long Guiro
Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo
Open Surdo
-----
[EXC3]
[EXC3]
88
89
76
90
92
94
91
77
78
80
82
[EXC4]
[EXC4]
[EXC5]
[EXC5]
[EXC4]
[EXC4]
[EXC5]
[EXC5]
[EXC4]
[EXC4]
[EXC5]
[EXC5]
93
Shekere 2
79
Low Bongo Mute
High Bongo Mute
-----
-----
-----
95
81
96
98
C7
97
99
83
-----
100
101
Falamenco HC
Falamenco HC
Bongo Cowbell
-----
Bongo Cowbell
-----
C6 84
86
85
87
102
104
[EXC6]
[EXC6]
[EXC6]
[EXC6]
[EXC6]
[EXC6]
103
105
88
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Drum/SFX Set List
* - - - - -: No sound.
* [EXC]: will not sound simultaneously with other percussion instruments of the same number.
DR JAZZ
DR GS STAND
DR TR-808
DR DANCE
DR BRUSH
21
23
24
26
28
29
31
33
35
36
38
40
41
43
45
47
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
22
25
27
Slap
Slap
Slap
Slap
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Std Kick 2
808 Bass Drum 1
808 Rim Shot
808 Snare Drum
Hand Clap
Snare Drum 2
808 Low Tom 2
808 CHH
[EXC7]
[EXC7]
Scratch Push
Scratch Pull
Dance Snr 1
Square Click
Metronome Click
Metronome Bell
Kick 1
808 Bass Drum 2
808 Rim Shot
TR-909 Snr
Hand Clap
Dance Snr 2
808 Low Tom 2
808 CHH [EXC1]
808 Low Tom 1
808 CHH [EXC1]
808 Mid Tom 2
808 OHH [EXC1]
808 Mid Tom 1
808 Hi Tom 2
808 Cymbal
808 Hi Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
808 Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal 2
High Bongo
Low Bongo
808 High Conga
808 Mid Conga
808 Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
[EXC7]
[EXC7]
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Std Kick 2
Std Kick 1
Side Stick
Snare Drum 1
Hand Clap
Snare Drum 2
Low Tom 2
Closed Hi-hat 1
Low Tom 1
Pedal Hi-hat 1
Mid Tom 2
[EXC7]
[EXC7]
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Kick 2
Kick 1
Side Stick
Brush Tap
[EXC7]
[EXC7]
30
32
34
C2
37
39
Brush Slap
Brush Swirl
Brush Low Tom 2
Closed Hi-hat 2
Brush Low Tom 1
Pedal Hi-hat 2
Brush Mid Tom 2
Open Hi-hat 2
Brush Mid Tom 1
Brush Hi Tom 2
Crash Cymbal 1
Brush Hi Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
42
44
46
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
808 Low Tom 1
808 CHH
808 Mid Tom 2
808 OHH [EXC1]
808 Mid Tom 1
808 Hi Tom 2
808 Cymbal
808 Hi Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
808 Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal 2
High Bongo
Low Bongo
808 High Conga
808 Mid Conga
808 Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Open Hi-hat 1
Mid Tom 1
High Tom 2
Crash Cymbal 1
High Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
C3 48
50
49
51
52
53
54
56
58
55
57
Crash Cymbal 2
Vibra-slap
59
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
C4 60
62
61
63
64
65
66
68
70
67
69
Cabasa
808 Maracas
Short Hi Whistle
808 Maracas
Short Hi Whistle
Maracas
Short Hi Whistle
Maracas
Short Hi Whistle
71
[EXC2]
[EXC2]
[EXC2]
[EXC2]
Long Low Whistle [EXC2]
Long Low Whistle [EXC2]
Long Low Whistle [EXC2]
Long Low Whistle [EXC2]
C5 72
74
73
75
Short Guiro
Long Guiro
808 Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
[EXC3]
[EXC3]
Short Guiro
Long Guiro
808 Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
[EXC3]
[EXC3]
Short Guiro
Long Guiro
Claves
[EXC3]
[EXC3]
Short Guiro
Long Guiro
Claves
[EXC3]
[EXC3]
76
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
77
78
80
82
[EXC4]
[EXC4]
[EXC5]
[EXC5]
[EXC4]
[EXC4]
[EXC5]
[EXC5]
[EXC4]
[EXC4]
[EXC5]
[EXC5]
[EXC4]
[EXC4]
[EXC5]
[EXC5]
79
81
83
Jingle Bell
Bell Tree
Castanets
Jingle Bell
Bell Tree
Castanets
Jingle Bell
Bell Tree
Castanets
Jingle Bell
Bell Tree
Castanets
C6 84
86
85
87
Mute Surdo
Open Surdo
-----
[EXC6]
[EXC6]
Mute Surdo
Open Surdo
-----
[EXC6]
[EXC6]
Mute Surdo
Open Surdo
-----
[EXC6]
[EXC6]
Mute Surdo
Open Surdo
-----
[EXC6]
[EXC6]
88
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Drum/SFX Set List
* - - - - -: No sound.
* [EXC]: will not sound simultaneously with other percussion instruments of the same number.
DR ORCHESTRA
DR GS ROOM
DR GS BRUSH
21
23
24
26
28
29
31
33
35
36
38
40
41
43
45
47
-----
-----
-----
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
-----
-----
-----
Bar Chime
Snare Roll
Finger Snap
High Q
Slap
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Std Kick 2
22
Bar Chime
Snare Roll
Finger Snap
Close Hi-hat
Pedal Hi-hat
Open Hi-hat
Ride Cymbal
Sticks
Square Click
Metronome Click
Metronome Bell
Concert BD 2
Concert BD 1
Side Stick
Concert SD
Castanets
Concert SD
Timpani F
Timpani F#
Timpani G
Timpani G#
Timpani A
25
27
[EXC1]
[EXC1]
[EXC1]
Slap
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Std Kick 2
Std Kick 1
Side Stick
Snare Drum 1
Hand Clap
Snare Drum 2
Room Low Tom 2
Closed Hi-hat 1
Room Low Tom 1
Pedal Hi-hat 1
Room Mid Tom 2
Open Hi-hat 1
Room Mid Tom 1
Room Hi Tom 2
Crash Cymbal 1
Room Hi Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
[EXC7]
[EXC7]
[EXC7]
[EXC7]
30
32
34
Std Kick 1
Side Stick
Brush Tap
C2
37
39
Brush Slap
Brush Swirl
Low Tom 2
Closed Hi-hat 1
Low Tom 1
Pedal Hi-hat 1
Mid Tom 2
Open Hi-hat 1
Mid Tom 1
High Tom 2
Crash Cymbal 1
High Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
42
44
46
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
[EXC1]
Timpani A#
Timpani B
Timpani c
Timpani c#
Timpani d
Timpani d#
Timpani e
C3 48
50
49
51
52
Timpani f
53
54
56
58
Tambourine
Splash Cymbal
Cowbell
Concert Cymbal 2
Vibra-slap
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
55
57
59
Concert Cymbal 1
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
C4 60
62
61
63
64
65
66
68
70
67
69
Maracas
Short Hi Whistle
Maracas
Short Hi Whistle
Maracas
Short Hi Whistle
71
[EXC2]
[EXC2]
[EXC2]
Long Low Whistle [EXC2]
Long Low Whistle [EXC2]
Long Low Whistle [EXC2]
C5 72
74
73
75
Short Guiro
Long Guiro
Claves
[EXC3]
[EXC3]
Short Guiro
Long Guiro
Claves
[EXC3]
[EXC3]
Short Guiro
Long Guiro
Claves
[EXC3]
[EXC3]
76
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
77
78
80
82
[EXC4]
[EXC4]
[EXC5]
[EXC5]
[EXC4]
[EXC4]
[EXC5]
[EXC5]
[EXC4]
[EXC4]
[EXC5]
[EXC5]
79
81
83
Jingle Bell
Bell Tree
Castanets
Jingle Bell
Bell Tree
Castanets
Jingle Bell
Bell Tree
Castanets
C6 84
86
85
87
Mute Surdo
Open Surdo
Applause
[EXC6]
[EXC6]
Mute Surdo
Open Surdo
-----
[EXC6]
[EXC6]
Mute Surdo
Open Surdo
-----
[EXC6]
[EXC6]
88
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Song List
* All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws.
35 Invention 10
36 Invention 11
37 Invention 12
38 Invention 13
39 Invention 14
40 Invention 15
41 Beyer 15
Masterpices
Practice
1
2
3
4
5
6
7
8
9
Sonate No.15
1
2
3
4
5
6
7
8
9
Openness
La Fille aux Cheveux de Lin
La Campanella
Scherzo No.2
Arabesque
Pastoral
A Small Gathering
Innocence
Étude, op.10-12
Liebesträume 3
Étude, op.10-3
Je te veux
Progress
42 Beyer 21
The Clear Stream
Gracefulness
The Hunt
43 Beyer 25
44 Beyer 29
Valse, op.64-1
45 Beyer 34
10 Golliwog's Cakewalk
11 Fantaisie-Impromptu
12 Arabesque 1
10 Tender Flower
11 The Young Shepherdess
12 Farewell
46 Beyer 38
47 Beyer 42
48 Beyer 46
13 An der schönen, blauen Donau
14 Auf Flügeln des Gesanges
15 Mazurka No.5
13 Consolation
14 Austrian Dance
15 Ballad
49 Beyer 51
50 Beyer 55
51 Beyer 60
16 Gymnopédie 1
16 Sighing
52 Beyer 64
17 Étude, op.25-1
17 The Chatterbox
18 Restlessness
19 Ave Maria
20 Tarantella
53 Beyer 67
18 Clair de Lune
54 Beyer 73
19 Étude, op.10-5
55 Beyer 78
20 Dr. Gradus ad Parnassum
21 Grande Valse Brillante
22 La prière d'une Vierge
23 Course en Troïka
24 To The Spring
56 Beyer 81
21 Angelic Harmony
22 Gondola Song
23 The Return
57 Beyer 90
58 Beyer 93
59 Beyer 98
24 The Swallow
25 The Knight Errant
26 Invention 1
27 Invention 2
28 Invention 3
29 Invention 4
30 Invention 5
31 Invention 6
32 Invention 7
33 Invention 8
34 Invention 9
60 Beyer 103
61 Czerny 100- 1
62 Czerny 100-10
63 Czerny 100-20
64 Czerny 100-30
65 Czerny 100-38
66 Czerny 100-43
67 Czerny 100-60
68 Czerny 100-75
69 Czerny 100-86
70 Czerny 100-96
25 Valse, op.64-2
26 Radetzky Marsch
27 Träumerei
28 Moments Musicaux 3
29 Prélude, op.28-15
30 Harmonious Blacksmith
31 Ungarische Tänze 5
32 Türkischer Marsch (Beethoven)
33 Nocturne No.2
34 Frühlingslied
35 Präludium
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Song List
36 Jägerlied
8
9
Annie Laurie
O'sole Mio
8
9
Silent Night, Holy Night
Puppy's March
37 Menuet Antique
38 Für Elise
10 Ave Maria
10 Little Fox
39 Türkischer Marsch (Mozart)
40 Ständchen
11 Greensleeves
12 Hallelujah!
11 Lightly Row
12 The Cuckoo
13 Grandfather's Clock
41 Humoreske
13 Stagecoach
* Song with a “*” symbol appended to
their name may not allow output of their
notations as image data in BMP
(bitmap) format.
42 Blumenlied
14 Little Brown Jug
15 Amazing Grace
16 Londonderry Air
17 When The Saints Go Marchin' In
18 Trio Grande
43 Alpenglöckchen
44 Menuett G dur (Beethoven)
45 Venezianisches Gondellied
46 Alpenabendröte
47 Farewell to the Piano
48 Brautchor
Songs for Visual
Lesson
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
19 Wedding Song
20 L'éveil de l'amour
21 Preludelight
■ Beginner’s Course
Mary Had A Little Lamb
Come Birds
49 Battle of Waterloo
50 Wiener Marsch
51 Le Coucou
The Cuckoo
22 Blue Sky Rag
23 Late Night Chopin
24 Sun Daze
Old MacDonald Had A Farm
London Bridge
Oh! Susanna
52 Menuett G dur (Bach)
53 Spinnerlied
Sonata (Mozart)
Aura Lee
25 Keepers Tale
Pathetique
54 Gavotte
26 Secret Agent
Amazing Grace
55 Heidenröslein
27 Kismet's Salsa
28 Roll Over Ludwig
29 A Prelude To...
30 Count On The Blues
31 One Down And Easy
32 Bach's A Boppin'
33 From Matthew's Passion
34 Hungarian Rag
35 Paganini Boogie
36 Fly Flee
■ Repertoire Course
Traumerei
Trepak
56 Zigeuner Tanz
57 La Cinquantaine
58 Csikos Post
Canon (Pachelbel)
Railroad
59 Dolly's Dreaming Awakening
60 La Violette
Silent Night, Holy Night
Clair De Lune
La Primavera
61 Fröhlicher Landmann
62 Sonatine op.36-1 (Clementi)
63 Sonatine op.20-1 (Kuhlau)
64 Sonatine No.5 (Beethoven)
Popular
Grandfather's Clock
Eine Kleine Nachtmusik
Gymnopedie 1
■ Challenge Course
Hanon
Kids
Burgmuller
Beethoven
Chopin
1
2
3
4
5
6
7
Salut D'amour
Canon (Pachelbel)
Ombra maifu
Les patineurs, Valse
Brindisi
1
2
3
4
5
6
7
Old MacDonald Had A Farm
Twinkle Twinkle, Little Star
Frog Song
Fast Play
Finger Technique
Chord
Mary Had A Little Lamb
London Bridge
American Folk Song
Screen Music
Jazz
Die Lorelei
Jingle Bells
Entertainer
Joy To The World
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Files That the HPi-7S Can Use
What Are Music Files?
■ About the HPi-7S Sound Generator
Music files contains musical information such as how long the key for
a corresponding pitch is played, the force applied to the key played,
and other such information. Performance data is transmitted to the HPi-
7S from music files saved in USB memory and CD-ROM, and played
back without change as songs. This is different than a audio CD, since
the music file does not contain a recording of the sound itself. This
makes it possible to change tempos and keys freely, allowing you to
use it in many different ways.
The HPi-7S come equipped with GM 2/GS sound generators.
General MIDI
The General MIDI is a set of recommendations which seeks to provide
a way to go beyond the limitations of proprietary designs, and
standardize the MIDI capabilities of sound generating devices. Sound
generating devices and music files that meets the General MIDI
standard bears the General MIDI logo. Music files bearing the
General MIDI logo can be played back using any General MIDI
sound generating unit to produce essentially the same musical
performance.
Regarding Copyright
Use of the internal songs for any purpose other than private, personal
enjoyment without the permission of the copyright holder is prohibited
by law. Additionally, this data must not be copied, nor used in a
secondary copyrighted work without the permission of the copyright
holder.
General MIDI 2
The upwardly compatible General MIDI 2 recommendations pick up
where the original General MIDI left off, offering enhanced expressive
capabilities, and even greater compatibility. Issues that were not
covered by the original General MIDI recommendations, such as how
sounds are to be edited, and how effects should be handled, have
now been precisely defined. Moreover, the available sounds have
been expanded. General MIDI 2 compliant sound generators are
capable of reliably playing back music files that carry either the
General MIDI or General MIDI 2 logo.
Please be aware that if you create derivative works that are based on
existing copyrighted material, such as commercially available SMF
music files, such works may violate copyright law if used for any
purpose other than personal enjoyment. Roland takes no responsibility
for any copyright violation you may commit by creating such works.
■ The HPi-7S Allows You To Use the Following
Music Files
In some cases, the conventional form of General MIDI, which does not
include the new enhancements, is referred to as “General MIDI 1” as
a way of distinguishing it from General MIDI 2.
VIMA TUNES
VIMA TUNES is a Roland specification for music files that contains
image and lyric data, allowing you to enjoy songs with lyrics and
images simultaneously. When data bearing the “VIMA TUNES” logo
is played back on a device that bears the same logo, lyrics can be
shown on the screen of a connected external display or television,
letting you enjoy karaoke or watch a slide show.
GS Format
The GS Format is Roland’s set of specifications for standardizing the
performance of sound generating devices. In addition to including
support for everything defined by the General MIDI, the highly
compatible GS Format additionally offers an expanded number of
sounds, provides for the editing of sounds, and spells out many details
for a wide range of extra features, including effects such as reverb
and chorus. Designed with the future in mind, the GS Format can
readily include new sounds and support new hardware features when
they arrive. Since it is upwardly compatible with the General MIDI,
Roland’s GS Format is capable of reliably playing back GM Scores
equally as well as it performs GS music files (music files that have
been created with the GS Format in mind). This product supports both
the General MIDI 2 and the GS Format, and can be used to play back
music data carrying either of these logos.
SMF Music Files
SMFs (Standard MIDI Files) use a standard format for music file that
was formulated so that files containing music file could be widely
compatible, regardless of the manufacturer of the listening device. An
enormous variety of music is available, whether it be for listening, for
practicing musical instruments, for Karaoke, etc.
SMF with Lyrics
“SMF with Lyrics” refers to SMF (Standard MIDI File) that contains the
lyrics. When Music Files carrying the “SMF with Lyrics” logo are
played back on a compatible device (one bearing the same logo), the
lyrics will appear in its display.
XG lite
XG is a tone generator format of YAMAHA Corporation, that defines
the ways in which voices are expanded or edited and the structure
and type of effects, in addition to the General MIDI 1 specification.
XGlite is a simplified version of XG tone generation format. You can
play back any XG music files using an XGlite tone generator.
However, keep in mind that some music files may play back differently
compared to the original files, due to the reduced set of control
parameters and effects.
The HPi-7S come equipped with GM 2/GS sound generators.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI Implementation Chart
DIGITAL PIANO
Date : June 1, 2007
Version : 1.00
Model HPi-7S
MIDI Implementation Chart
Transmitted
Recognized
Remarks
Function...
Basic
Channel
Default
Changed
1
1–16
1–16
1–16
Default
Messages
Altered
Mode 3
x
Mode 3
Mode 3, 4(M=1)
* 2
Mode
**************
Note
Number :
15–113
**************
0–127
0–127
True Voice
Note ON
Note OFF
O
O
O
O
Velocity
*1
*1
After
Touch
Key’s
Ch’s
x
x
O
O
Pitch Bend
x
O
0, 32
O
x
O
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Bank select
Modulation
Portamento time
Data entry
1
O
5
6, 38
7
x
O
x
O
x
O
Volume
10
x
O
Panpot
11
x
O
Expression
Hold 1
Control
Change
64
O
x
O
65
O
Portamento
Sostenuto
66
O
O
x
O
67
O
Soft
84
O
Portamento control
Effect1 depth
Effect3 depth
NRPN LSB, MSB
RPN LSB, MSB
91
O
O
x
O (Reverb)
93
O (Chorus)
98, 99
100, 101
O
O
*1
*1
x
Prog
Change
0–127
**************
O
0–127
: True #
Program number 1–128
System Exclusive
O
O
: Song Pos
: Song Sel
: Tune
x
x
x
x
x
x
System
Common
System
Real Time
: Clock
: Commands
O
O
x
x
x
x
x
x
O
x
O (120, 126, 127)
: All sound off
O
:
Reset all controllers
Aux
Message
O
: Local Control
: All Notes OFF
: Active Sense
: Reset
O (123–125)
O
x
* 1 O x is selectable by Sys Ex.
* 2 Recognized as M=1 even if M=1.
Notes
Mode 1 : OMNI ON, POLY
Mode 2 : OMNI ON, MONO
O : Yes
X : No
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications
Song
1 song
<Keyboard>
Note Storage
Tempo
Approx. 30,000 notes
Quarter note = 10–500
120 ticks per quarter note
Realtime
88 keys (PHA II ivory feel Keyboard with
Escapement)
Keyboard
Touch: 100 levels/Fixed Touch (level
adjustable)
Hammer Response: Off/1 to 10
Resolution
Touch
Sensitivity
Recording
Method
Whole
Copy, Quantize, Delete, Insert, Erase,
Transpose, Part Exchange, Note Edit, PC Edit
Dual (volume balance adjustable)
Edit
Keyboard Mode Split (split point adjustable)
Manual Drums/SFX
Reset, Play/Stop, Rec, Bwd, Fwd, Track Select,
All Song Play, Random Play, Count-in,
Countdown, Marker Set, Repeat, Tempo Mute,
Track Mute, Melody Guide,16 part Mute,
Volume Balance,
Twin Piano
<Sound Generator>
Control
88 keys stereo multi-sampling piano sound
Conforms to GM2/GS/XG Lite
Center Cancel (only for audio playback)
Max. Polyphony 128 voices
<Internal Memory>
Songs
612 tones
Tones
Max. 200 songs
(including 15 drum sets, 1 SFX set)
Save Song
Standard MIDI Files (Format 0)
User image display: 1
8 types : Equal, Just (Major), Just (Minor),
Arabic, Kirnberger,Pythagorean,
Meantone, Werkmeister
Others
Temperament
Selectable tonic
<External Memory>
Stretched
Tuning
2 types (On/Off)
USB Memory (Sold Separately)
USB CD Drive (Sold Commercially, Read Only)
USB Floppy Disk Drive (Sold Separately)
External
Storage
415.3 Hz–466.2 Hz
(adjustable in increments of 0.1 Hz)
Master Tuning
Standard MIDI Files (Format 0/1),
Roland Original Format (i-Format),
Audio File (WAV 44.1kHz/16bit Linear
Format)
Key Transpose: -6 to +5 (in semitones)
Playback Transpose: -24 to +24 (in semitones)
Playback Transpose with Audio CD/Audio File:
-6 to +5 (in semitones)
Playable Data
Transpose
Audio CDs (CD-DA)
Save Format
<Others>
Standard MIDI Files (Format 0)
Reverb (10 levels)
Chorus (10 levels)
3D (4 Levels)
Dynamics Sound Control (3 types)
Internal Songs
183 songs
60W x 2
Effects
Rated Power
Output
Only for Piano Tones:
Open/close lid (7 levels)
Damper Resonance (10 levels)
Key Off Resonance (10 levels)
String Resonance (10 levels)
Speakers
LCD
16 cm x 2 (with speaker box), 5 cmx2
640 x 240 dots graphic color LCD (with backlit)
Equalizer
4 band Digital Equalizer
Notation/ User image (Built-in Display)/ Slide
Show (External Display)
Display
<Composer>
Languages
Notation
Control
English/Japanese/German/French/Spanish
Beat: 2/2, 0/4, 2/4, 3/4, 4/4, 5/4, 6/4,
7/4, 3/8, 6/8, 9/8, 12/8
Grand staff/G clef staff/F clef staff, with note
name/lyrics/chords/fingering
Volume: 11 levels
Pattern: 11 patterns
Sound: 8 types
Metronome
Tracks
Volume, Brilliance, LCD Contrast, Mic volume
Damper (half-pedal recognition),
Soft (half-pedal recognition, function
assignable),
Pedals
5 tracks/16 tracks
Sostenuto (function assignable)
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications
Piano Designer, One Touch Piano, Replay,
Wonderland/Game, Visual Lesson, DoReMi
Course, Twin Piano Game, V-LINK, Tone Demo,
Auto Demo, Panel Lock, BMP Export,
User Image Display,
Other Functions
Mic Echo, Classic Position
Ext Memory Connector
USB Connector
Output Jacks (L/Mono, R)
Input Jacks (Front: L/Mono, R Rear: L/Mono, R)
Phones Jack (Stereo) x 2
MIDI Connectors (In, Out)
AC Inlet
Connectors
External Display connector (15-pin D-Sub type)
Video Out connector
Mic Jack
AC 115 V, AC 117 V, AC 220 V, AC 230 V,
AC 240 V (50/60 Hz)
Power Supply
Power
120 W
Consumption
Dimensions
1409 (W) x 529 (D) x 892 (H) mm
(Includingpiano 55-1/2 (W) x 20-7/8 (D) x 35-1/8 (H) inches
stand)
Dimensions
1409 (W) x 529 (D) x 1098 (H) mm
(Includingpiano 55-1/2 (W) x 20-7/8 (D) x 43-1/4 (H) inches
stand and
music rest)
Weight
(Includingpiano 80 kg / 176 lbs 6 oz
stand)
Owner’s Manual
Power Cord
Roland 60 Classical Piano Masterpieces
Accessories
Headphones Hook
USB Memory
Options
Floppy Disk Drive
* In the interest of product improvement, the specifications and/or
appearance of this unit are subject to change without prior
notice.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Numerics
A
Adjusting the sound .................................................... 89
All Song Play ............................................................. 43
Display Content ........................................................ 112
Display Method ........................................................ 112
DoReMi Course .......................................................... 32
Dual Performance ....................................................... 56
B
Bank Select LSB ........................................................ 109
Basic Operation ......................................................... 25
Basic Screen .............................................................. 26
Brightness
Performance on Specific Tracks ............................... 76
C
Center Cancel ............................................................ 49
Connecting
Fix Velocity ................................................................ 87
Speaker Cable ...................................................... 16
Contrast of the Screen ................................................. 20
Copy ................................................................... 84–85
Copy (Copying Measures) ......................................... 101
Count ........................................................................ 64
Countdown ................................................................ 64
Count-in ..................................................................... 64
Cursor Buttons ............................................................ 25
General MIDI 2 ........................................................ 125
GS ......................................................................... 125
GS Format ............................................................... 125
H
Hammer Response ...................................................... 86
Headphone Hook ....................................................... 19
Headphones .............................................................. 18
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
I
Initialization
Part Settings ............................................................... 95
Internal Song .............................. 30, 40–41, 59, 73, 123
Internal Song List ...................................................... 123
K
L
Lesson Functions ......................................................... 30
Lid ............................................................................ 86
Power ON ................................................................. 18
M
MIDI Channel (MIDI Transmit Channel) ........................ 108
MIDI-Related Settings ................................................. 108
Music Holder ............................................................. 16
Music Rest ................................................................. 16
Visual Lesson ........................................................ 37
Program Change ...................................................... 109
N
Quantize ................................................................. 101
Notation Screen ......................................................... 26
Notation Settings ................................................... 99
Note Edit ................................................................. 103
O
One-Touch Piano ........................................................ 50
Original Default Setting ............................................... 98
130
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Recording
Transmit Channel ...................................................... 108
Twin Piano Mode ................................................. 34, 36
16 Track Recording ............................................... 94
Erasing a Recorded Song ....................................... 76
Sending Recorded Performance Data to a MIDI Device ...
109
The Five Track Buttons and 16 Tracks ....................... 77
Replay ................................................................. 26, 91
Right-hand Tone .......................................................... 57
S
Screen
Sostenuto Pedal .......................................................... 29
Sound Generator ...................................................... 125
Split .......................................................................... 57
Split Performance ........................................................ 57
Split Point .................................................................. 57
Standard Pitch ............................................................ 88
Start Measure ........................................................... 105
Stretch Tuning ............................................................ 87
String Resonance ........................................................ 87
Headphone Volume ............................................... 18
Overall Volume ..................................................... 18
Part Volume .......................................................... 95
Dual Performance .................................................. 56
Wonderland .............................................................. 30
X
XG lite .................................................................... 125
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
Information
When you need repair service, call your nearest Roland Service Center or authorized Roland
distributor in your country as shown below.
PHILIPPINES
CURACAO
URUGUAY
NORWAY
JORDAN
AFRICA
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
Zeelandia Music Center Inc.
Orionweg 30
Todo Musica S.A.
Francisco Acuna de Figueroa
1771
Roland Scandinavia Avd.
MUSIC HOUSE CO. LTD.
Kontor Norge
FREDDY FOR MUSIC
P. O. Box 922846
Amman 11192 JORDAN
TEL: (06) 5692696
EGYPT
Al Fanny Trading Office
9, EBN Hagar Al Askalany
Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
Curacao, Netherland Antilles
TEL:(305)5926866
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
TEL: (02) 899 9801
DOMINICAN REPUBLIC
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Santo Domingo,
Dominican Republic
TEL:(809) 683 0305
TEL: 2273 0074
SINGAPORE
SWEE LEE MUSIC
COMPANY PTE. LTD.
150 Sims Drive,
SINGAPORE 387381
TEL: 6846-3676
KUWAIT
EASA HUSAIN AL-YOUSIFI
& SONS CO.
Abdullah Salem Street,
Safat, KUWAIT
TEL: 243-6399
VENEZUELA
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar
POLAND
ROLAND POLSKA SP. Z O.O.
UL. Gibraltarska 4.
PL-03 664 Warszawa
POLAND
REUNION
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
import
#7 zona Industrial de Turumo
Caracas, Venezuela
TEL: (212) 244-1122
TEL: (022) 679 4419
ECUADOR
Mas Musika
Rumichaca 822 y Zaruma
Guayaquil - Ecuador
TAIWAN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung
Shan N.Road Sec.2, Taipei,
TAIWAN, R.O.C.
LEBANON
Chahine S.A.L.
George Zeidan St., Chahine
Bldg., Achrafieh, P.O.Box: 16-
5857
Beirut, LEBANON
TEL: (01) 20-1441
PORTUGAL
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: 22 608 00 60
REUNION ISLAND
TEL: (0262) 218-429
TEL:(593-4)2302364
SOUTH AFRICA
T.O.M.S. Sound & Music
(Pty)Ltd.
2 ASTRON ROAD DENVER
JOHANNESBURG ZA 2195,
SOUTH AFRICA
EUROPE
EL SALVADOR
OMNI MUSIC
75 Avenida Norte y Final
Alameda Juan Pablo II,
Edificio No.4010 San Salvador,
EL SALVADOR
TEL: (02) 2561 3339
AUSTRIA
Roland Elektronische
Musikinstrumente HmbH.
ROMANIA
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni,
ROMANIA
OMAN
THAILAND
TALENTZ CENTRE L.L.C.
Malatan House No.1
Al Noor Street, Ruwi
SULTANATE OF OMAN
TEL: 2478 3443
Theera Music Co. , Ltd.
330 Soi Verng NakornKasem,
New Road, Sumpantawongse,
Bangkok 10100, THAILAND
TEL: (02) 224-8821
Austrian Office
TEL: (011)417 3400
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
TEL: 262-0788
Paul Bothner(PTY)Ltd.
Royal Cape Park, Unit 24
Londonderry Road, Ottery 7800
Cape Town, SOUTH AFRICA
TEL: (021) 799 4900
TEL: (266) 364 609
GUATEMALA
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
RUSSIA
MuTek
Dorozhnaya ul.3,korp.6
117 545 Moscow, RUSSIA
TEL: (095) 981-4967
QATAR
Al Emadi Co. (Badie Studio &
Stores)
P.O. Box 62, Doha, QATAR
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala
Guatemala
AUSTRALIA/
NEW ZEALAND
TEL:(502) 599-2888
TEL: 4423-554
ASIA
CHINA
Roland Shanghai Electronics
SLOVAKIA
HONDURAS
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
3 Ave.11 Calle S.O
San Pedro Sula, Honduras
TEL: (504) 553-2029
AUSTRALIA/
SAUDI ARABIA
aDawliah Universal
Electronics APL
Corniche Road, Aldossary
Bldg., 1st Floor, Alkhobar,
31952 SAUDI ARABIA
TEL: (014) 575811
DAN Acoustic s.r.o.
Povazská 18.
NEW ZEALAND
Roland Corporation
Australia Pty.,Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
CROATIA
ART-CENTAR
Degenova 3.
HR - 10000 Zagreb
TEL: (1) 466 8493
SK - 940 01 Nové Zámky
TEL: (035) 6424 330
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
SPAIN
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: 93 493 91 00
MARTINIQUE
Musique & Son
Z.I.Les Mangle
97232 Le Lamantin
Martinique F.W.I.
TEL: 596 596 426860
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
CZECH REP.
CZECH REPUBLIC
DISTRIBUTOR s.r.o
Voctárova 247/16
CZ - 180 00 PRAHA 8,
CZECH REP.
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 3 Section Anhuaxili
Chaoyang District Beijing
100011 CHINA
For Australia
Tel: (02) 9982 8266
For New Zealand
Tel: (09) 3098 715
SYRIA
Technical Light & Sound
Center
Rawda, Abdul Qader Jazairi St.
Bldg. No. 21, P.O.BOX 13520,
Damascus, SYRIA
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
Gigamusic SARL
10 Rte De La Folie
97200 Fort De France
Martinique F.W.I.
TEL: 596 596 715222
TEL: (2) 830 20270
TEL: (010) 6426-5050
CENTRAL/LATIN
AMERICA
DENMARK
HONG KONG
Tom Lee Music Co., Ltd.
Service Division
22-32 Pun Shan Street, Tsuen
Wan, New Territories,
HONG KONG
TEL: (011) 223-5384
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
TURKEY
ZUHAL DIS TICARET A.S.
Galip Dede Cad. No.37
Beyoglu - Istanbul / TURKEY
TEL: (0212) 249 85 10
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico
D.F. MEXICO
TEL: 3916 6200
TEL: 2415 0911
FINLAND
Roland Scandinavia As, Filial
Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
Parsons Music Ltd.
TEL: (55) 5668-6699
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Ground Floor, Dubai,
U.A.E.
UKRAINE
EURHYTHMICS Ltd.
P.O.Box: 37-a.
Nedecey Str. 30
UA - 89600 Mukachevo,
UKRAINE
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
BARBADOS
NICARAGUA
Bansbach Instrumentos
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, Nicaragua
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, Barbados
TEL: (246)430-1100
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844
Norderstedt, GERMANY
TEL: (040) 52 60090
INDIA
Rivera Digitec (India) Pvt. Ltd.
411, Nirman Kendra
Mahalaxmi Flats Compound
Off. Dr. Edwin Moses Road,
Mumbai-400011, INDIA
TEL: (022) 2493 9051
TEL: (04) 3360715
TEL: (03131) 414-40
BRAZIL
Roland Brasil Ltda.
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
UNITED KINGDOM
TEL: (505)277-2557
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
NORTH AMERICA
PANAMA
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City, REP. DE
PANAMA
GREECE/CYPRUS
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
CANADA
Roland Canada Ltd.
(Head Office)
5480 Parkwood Way
Richmond B. C., V6V 2M4
CANADA
UNITED KINGDOM
TEL: (01792) 702701
INDONESIA
PT Citra IntiRama
Jl. Cideng Timur No. 15J-15O
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
TEL: 315-0101
PARAGUAY
Distribuidora De
Instrumentos Musicales
J.E. Olear y ESQ. Manduvira
Asuncion PARAGUAY
TEL: (595) 21 492147
MIDDLE EAST
TEL: (604) 270 6626
HUNGARY
KOREA
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint,
HUNGARY
BAHRAIN
Moon Stores
No.1231&1249 Rumaytha
Building Road 3931, Manama
339 BAHRAIN
COLOMBIA
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, Colombia
Roland Canada Ltd.
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
TEL: (23) 511011
PERU
Audionet
Distribuciones Musicales SAC
Juan Fanning 530
Miraflores
TEL: (574)3812529
TEL: 17 813 942
TEL: (905) 362 9707
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
MALAYSIA
COSTA RICA
JUAN Bansbach Instrumentos
Musicales
Ave.1. Calle 11, Apartado
10237,
San Jose, COSTA RICA
TEL: 258-0211
Roland Asia Pacific Sdn. Bhd.
45-1, Block C2, Jalan PJU 1/39,
Dataran Prima, 47301 Petaling
Jaya, Selangor, MALAYSIA
TEL: (03) 7805-3263
IRAN
MOCO INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
U. S. A.
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
Lima - Peru
TEL: (511) 4461388
TRINIDAD
AMR Ltd
Ground Floor
Maritime Plaza
Barataria Trinidad W.I.
TEL: (868) 638 6385
TEL: (021) 285-4169
TEL: (323) 890 3700
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
VIET NAM
Suoi Nhac Company, Ltd
370 Cach Mang Thang Tam St.
Dist.3, Ho Chi Minh City,
VIET NAM
ISRAEL
Halilit P. Greenspoon & Sons
Ltd.
8 Retzif Ha'alia Hashnia St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
TEL: 9316540
As of May 1, 2007 (ROLAND)
132
Download from Www.Somanuals.com. All Manuals Search And Download.
For EU Countries
For China
133
Download from Www.Somanuals.com. All Manuals Search And Download.
For EU Countries
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
For the USA
DECLARATION OF CONFORMITY
Compliance Information Statement
Model Name : HPi-7S
Type of Equipment : Digital Piano
Responsible Party : Roland Corporation U.S.
Address : 5100 S. Eastern Avenue Los Angeles, CA 90040-2938, U. S. A.
Telephone : (323) 890 3700
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|