Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
201b
Before using this unit, carefully read the sections entitled:
“IMPORTANT SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT
SAFELY” (p. 3–5), and “IMPORTANT NOTES” (p. 6–8).
These sections provide important information concerning the
proper operation of the unit. Additionally, in order to feel assured
that you have gained a good grasp of every feature provided by
your new unit, owner’s manual should be read in its entirety.
The manual should be saved and kept on hand as a convenient
reference.
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
11. Only use attachments/accessories specified
by the manufacturer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
For the U.K.
WARNING:
THIS APPARATUS MUST BE EARTHED
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE UNIT SAFELY
The
symbol alerts the user to important instructions
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
The
symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
•
001 Before using this unit, make sure to read the
•
007 Make sure you always have the unit placed so it is
level and sure to remain stable. Never place it on
stands that could wobble, or on inclined surfaces.
instructions below, and the Owner’s Manual.
..........................................................................................................
..........................................................................................................
001-50
•
008a
•
Connect mains plug of this model to a mains
socket outlet with a protective earthing
connection.
The unit should be connected to a power supply
only of the type described in the operating
instructions, or as marked on the bottom of unit.
..........................................................................................................
..........................................................................................................
002a
•
008e
•
Do not open or perform any internal modifica-
tions on the unit.
Use only the attached power-supply cord. Also,
the supplied power cord must not be used with
any other device.
..........................................................................................................
..........................................................................................................
003 Do not attempt to repair the unit, or replace parts
•
009 Do not excessively twist or bend the power cord,
•
within it (except when this manual provides
specific instructions directing you to do so). Refer
all servicing to your retailer, the nearest Roland
Service Center, or an authorized Roland
nor place heavy objects on it. Doing so can
damage the cord, producing severed elements
and short circuits. Damaged cords are fire and
shock hazards!
distributor, as listed on the “Information” page.
..........................................................................................................
..........................................................................................................
004 Never use or store the unit in places that are:
•
010 This unit, either alone or in combination with an
•
amplifier and headphones or speakers, may be
capable of producing sound levels that could
cause permanent hearing loss. Do not operate for
a long period of time at a high volume level, or at
a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you should
immediately stop using the unit, and consult an
audiologist.
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating
duct, on top of heat-generating equipment); or
are
• Damp (e.g., baths, washrooms, on wet floors);
or are
• Humid; or are
..........................................................................................................
011 Do not allow any objects (e.g., flammable
• Exposed to rain; or are
• Dusty; or are
•
material, coins, pins); or liquids of any kind
(water, soft drinks, etc.) to penetrate the unit.
• Subject to high levels of vibration.
..........................................................................................................
Add When installing the piano, be sure to fasten the
•
caster using the supplied caster cup.
..........................................................................................................
..........................................................................................................
3
Download from Www.Somanuals.com. All Manuals Search And Download.
012a
101a
•
Immediately turn the power off, remove the
•
The unit should be located so that its location or
power cord from the outlet, and request servicing
by your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page when:
position does not interfere with its proper venti-
lation.
..........................................................................................................
102b
•
Always grasp only the plug on the power-supply
cord when plugging into, or unplugging from, an
outlet or this unit.
• The power-supply cord, or the plug has been
damaged; or
• If smoke or unusual odor occurs
..........................................................................................................
103a
• Objects have fallen into, or liquid has been
spilled onto the unit; or
•
At regular intervals, you should unplug the
power plug and clean it by using a dry cloth to
wipe all dust and other accumulations away from
its prongs. Also, disconnect the power plug from
the power outlet whenever the unit is to remain
unused for an extended period of time. Any
accumulation of dust between the power plug
and the power outlet can result in poor insulation
and lead to fire.
• The unit has been exposed to rain (or otherwise
has become wet); or
• The unit does not appear to operate normally
or exhibits a marked change in performance.
..........................................................................................................
013 In households with small children, an adult
•
should provide supervision until the child is
capable of following all the rules essential for the
safe operation of the unit.
..........................................................................................................
•
104 Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be
placed so they are out of the reach of children.
..........................................................................................................
014 Protect the unit from strong impact.
•
..........................................................................................................
105a
(Do not drop it!)
•
If the unit could become a hazard if it moves, all
caster wheels should be locked or fixed in place
once the unit has been placed at the place of
installation, or has been loaded onto a vehicle.
..........................................................................................................
015 Do not force the unit’s power-supply cord to
•
share an outlet with an unreasonable number of
other devices. Be especially careful when using
extension cords—the total power used by all
devices you have connected to the extension
cord’s outlet must never exceed the power rating
(watts/amperes) for the extension cord. Excessive
loads can cause the insulation on the cord to heat
up and eventually melt through.
..........................................................................................................
•
106 Never climb on top of, nor place heavy objects on
the unit.
..........................................................................................................
107b
•
Never handle the power cord or its plugs with
wet hands when plugging into, or unplugging
from, an outlet or this unit.
..........................................................................................................
016 Before using the unit in a foreign country, consult
..........................................................................................................
•
108d: Selection
with your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page.
•
If you need to move the instrument, take note of
the precautions listed below. At least two persons
are required to safely lift and move the unit. It
should be handled carefully, all the while keeping
it level. Make sure to have a firm grip, to protect
yourself from injury and the instrument from
damage.
..........................................................................................................
019 Batteries must never be recharged, heated, taken
•
apart, or thrown into fire or water.
1
• Check to make sure the bolts securing the unit
to the stand have not become loose. Fasten
them again securely whenever you notice any
loosening.
..........................................................................................................
•
023 DO NOT play a CD-ROM disc on a conventional
2
3
audio CD player. The resulting sound may be of a
level that could cause permanent hearing loss.
Damage to speakers or other system components
may result.
• Disconnect the power cord.
• Disconnect all cords coming from external
devices.
..........................................................................................................
5
7
•
026 Do not put anything that contains water (e.g.,
• Close the lid.
flower vases) on this unit. Also, avoid the use of
insecticides, perfumes, alcohol, nail polish, spray
cans, etc., near the unit. Swiftly wipe away any
liquid that spills on the unit using a dry, soft
cloth.
• Fold down the music stand.
..........................................................................................................
..........................................................................................................
4
Download from Www.Somanuals.com. All Manuals Search And Download.
109a
118b
•
Before cleaning the unit, turn off the power and
•
Always keep the following parts including with
the RG-3 and small components that may be
removed out of the reach of small children to
avoid accidental ingestion of these parts.
..........................................................................................................
110a
•
Whenever you suspect the possibility of lightning
in your area, pull the plug on the power cord out
of the outlet.
Included Parts
• Piano leg washers
• Bolts, washers, and springs used in attaching
the pedals
..........................................................................................................
•
111:ISfeulescetidonimproperly, batteries may explode or leak
• Cord clamps (using double-sided tape) used for
securing pedal cords and cord clamp
attachment screws
and cause damage or injury. In the interest of
safety, please read and observe the following
• Pedal stay securing screws
1
2
• Carefully follow the installation instructions
for batteries, and make sure you observe the
correct polarity.
Removable parts
• USB memory anti-theft lock (iron plate),
Anti-theft lock securing screw
..........................................................................................................
• Avoid using new batteries together with used
ones. In addition, avoid mixing different types
of batteries.
3
5
• Remove the batteries whenever the unit is to
remain unused for an extended period of time.
• If a battery has leaked, use a soft piece of cloth
or paper towel to wipe all remnants of the
discharge from the battery compartment. Then
install new batteries. To avoid inflammation of
the skin, make sure that none of the battery
discharge gets onto your hands or skin.
Exercise the utmost caution so that none of the
discharge gets near your eyes. Immediately
rinse the affected area with running water if
any of the discharge has entered the eyes.
6
• Never keep batteries together with metallic
objects such as ballpoint pens, necklaces,
hairpins, etc.
..........................................................................................................
•
112 Used batteries must be disposed of in compliance
with whatever regulations for their safe disposal
that may be observed in the region in which you
live.
..........................................................................................................
•
116 Be careful when opening/closing the lid so you
supervision is recommended whenever small
children use the unit.
..........................................................................................................
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTES
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2
and 3–5, please read and observe the following:
355b
Power Supply
• When moved from one location to another where the
301
temperature and/or humidity is very different, water
• Do not connect this unit to same electrical outlet that is
droplets (condensation) may form inside the unit. Damage
being used by an electrical appliance that is controlled by
or malfunction may result if you attempt to use the unit in
an inverter (such as a refrigerator, washing machine,
this condition. Therefore, before using the unit, you must
microwave oven, or air conditioner), or that contains a
allow it to stand for several hours, until the condensation
motor. Depending on the way in which the electrical
has completely evaporated.
appliance is used, power supply noise may cause this unit
356
• Do not allow rubber, vinyl, or similar materials to remain
on the unit for long periods of time. Such objects can
to malfunction or may produce audible noise. If it is not
practical to use a separate electrical outlet, connect a
power supply noise filter between this unit and the
electrical outlet.
discolor or otherwise harmfully affect the finish.
358
• Do not allow objects to remain on top of the keyboard.
306b
This can be the cause of malfunction, such as keys ceasing
to produce sound.
• Batteries are supplied with the unit. The life of these
batteries may be limited, however, since their primary
359
purpose was to enable testing.
• Do not paste stickers, decals, or the like to this instrument.
307
Peeling such matter off the instrument may damage the
exterior finish.
• Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions
and/or damage to speakers or other devices.
308
• Although the LCD and LEDs are switched off when the
Maintenance
POWER switch is switched off, this does not mean that the
unit has been completely disconnected from the source of
power. If you need to turn off the power completely, first
turn off the POWER switch, then unplug the power cord
from the power outlet. For this reason, the outlet into
which you choose to connect the power cord’s plug
should be one that is within easy reach and readily acces-
sible.
4•01bS(eidnit)ce your piano has a polished finish that is as delicate as
that found on finely crafted wooden furniture, it needs
careful, periodic care. A few important suggestions
concerning the proper care of the unit follow.
• For dusting, using a soft, clean cloth and/or piano-use
feather duster. Be sure to wipe gently. Even the tiniest
grains of sand or grit can leave scratches on the surface
if too much force is applied while wiping. Do not use
any cleaners or detergents, since they might deteriorate
the surface of the cabinet, and produce cracks.
• If the cabinet’s surface loses its luster, wipe it
thoroughly with a soft cloth dampened with a little of
the polishing liquid. Do not use any cleaners or deter-
gents, since they might deteriorate the surface of the
cabinet, and produce cracks. Do not use dusting cloths
that contain chemicals.
Placement
351
• Using the unit near power amplifiers (or other equipment
containing large power transformers) may induce hum.
To alleviate the problem, change the orientation of this
unit; or move it farther away from the source of inter-
ference.
352a
• This device may interfere with radio and television
402
reception. Do not use this device in the vicinity of such
receivers.
• Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
352b
deformation.
• Noise may be produced if wireless communications
403
devices, such as cell phones, are operated in the vicinity of
this unit. Such noise could occur when receiving or initi-
ating a call, or while conversing. Should you experience
such problems, you should relocate such wireless devices
so they are at a greater distance from this unit, or switch
• The pedals of this unit are made of brass. Brass eventually
darkens as the result of the natural oxidization process. If
the brass becomes tarnished, polish it using commercially
available metal polisher.
them off.
354b
Repairs and Data
• Do not expose the unit to direct sunlight, place it near
452
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Also, do not allow lighting devices that normally are used
while their light source is very close to the unit (such as a
piano light), or powerful spotlights to shine upon the
same area of the unit for extended periods of time.
Excessive heat can deform or discolor the unit.
• Please be aware that all data contained in the unit’s
memory may be lost when the unit is sent for repairs.
Important data should always be backed up on a USB
memory or floppy disk, or written down on paper (when
possible). During repairs, due care is taken to avoid the
loss of data. However, in certain cases (such as when
circuitry related to memory itself is out of order), we
regret that it may not be possible to restore the data, and
Roland assumes no liability concerning such loss of data.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTES
Additional Precautions
Handling Floppy Disks
551
(Using Optional Floppy Disk Drive)
• Please be aware that the contents of memory can be
651
irretrievably lost as a result of a malfunction, or the
improper operation of the unit. To protect yourself against
the risk of loosing important data, we recommend that
you periodically save a backup copy of important data
you have stored in the unit’s memory on a USB memory
• Floppy disks contain a plastic disk with a thin coating of
magnetic storage medium. Microscopic precision is
required to enable storage of large amounts of data on
such a small surface area. To preserve their integrity,
please observe the following when handling Floppy disks:
• Never touch the magnetic medium inside the disk.
• Do not use or store Floppy disks in dirty or dusty areas.
or floppy disk.
552
• Unfortunately, it may be impossible to restore the contents
of data that was stored in the unit‘s memory, on a USB
memory, or on a floppy disk once it has been lost. Roland
Corporation assumes no liability concerning such loss of
• Do not subject Floppy disks to temperature extremes
(e.g., direct sunlight in an enclosed vehicle). Recom-
mended temperature range: 10 to 50˚C (50 to 122˚F).
data.
• Do not expose Floppy disks to strong magnetic fields,
such as those generated by loudspeakers.
553
• Use a reasonable amount of care when using the unit’s
652
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
• Floppy disks have a “write protect” tab which can protect
the disk from accidental erasure. It is recommended that
the tab be kept in the PROTECT position, and moved to
the WRITE position only when you wish to write new
554
• Never strike or apply strong pressure to the display.
556
• When connecting / disconnecting all cables, grasp the
data onto the disk.
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s
internal elements.
fig.DiskProtect.e.eps
Rear side of the disk
557
• A small amount of heat will radiate from the unit during
Write
normal operation.
(can write new data onto disk)
558a
• To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
Write Protect Tab
those around you (especially when it is late at night).
Protect
559b
(prevents writing to disk)
• When you need to transport the unit, pack it in shock-
653
• The identification label should be firmly affixed to the
absorbent material. Transporting the unit without doing
so can cause it to become scratched or damaged, and
could lead to malfunction.
disk. Should the label come loose while the disk is in the
drive, it may be difficult to remove the disk.
654
560
• Store all disks in a safe place to avoid damaging them, and
• Do not apply undue force to the music stand while it is in
to protect them from dust, dirt, and other hazards. By
using a dirty or dust-ridden disk, you risk damaging the
use.
562
• Some connection cables contain resistors. Do not use
disk, as well as causing the disk drive to malfunction.
cables that incorporate resistors for connecting to this unit.
The use of such cables can cause the sound level to be
extremely low, or impossible to hear. For information on
655
• Disks containing performance data for this unit should
always be locked (have their write protect tab slid to the
“Protect” position) before you insert them into the drive
on some other unit (except the PR-300, or a product in the
HP-G, MT, KR, or Atelier families), or into a computer’s
drive. Otherwise (if the write protect tab remains in the
“Write” position), when you perform any disk operations
using the other device’s disk drive (such as checking the
contents of the disk, or loading data), you risk rendering
the disk unreadable by this unit’s disk drive.
cable specifications, contact the manufacturer of the cable.
565
• Before opening or closing the keyboard lid, always make
sure that no pets or other small animals are located on top
of the instrument (in particular, they should be kept away
from the keyboard and its lid). Otherwise, due to the
structural design of this instrument, small pets or other
animals could end up getting trapped inside it. If such a
situation is encountered, you must immediately switch off
the power and disconnect the power cord from the outlet.
You should then consult with the retailer from whom the
instrument was purchased, or contact the nearest Roland
Service Center.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTES
Handling the CDs (CD-ROMs)
203
Add
• When handling the discs, please observe the following.
*
GS (
) is a registered trademark of Roland
• Do not touch the encoded surface of the disc.
• Do not use in dusty areas.
Corporation.
204
*
Microsoft and Windows are registered trademarks
of Microsoft Corporation.
• Do not leave the disc in direct sunlight or an enclosed
vehicle.
209
*
Add
Mac OS is a trademark of Apple Computer, Inc.
801
• Avoid touching or scratching the shiny underside
(encoded surface) of the disc. Damaged or dirty CD-ROM
discs may not be read properly. Keep your discs clean
using a commercially available CD cleaner.
*
XG lite (
) is a registered trademark of Yamaha
Corporation.
*
Add This device in part makes use of Independent JPEG
A•dd Keep the disc in the case.
Group software.
Add
220
• Do not keep the disc in the CD drive for a long time.
*
All product names mentioned in this document are
trademarks or registered trademarks of their
respective owners.
Add
• Do not put a sticker on the label of the disc.
Add
• Wipe the disc with a soft and dry cloth radially from
inside to outside. Do not wipe along circumference.
Add
• Do not use benzine, record cleaner spray or solvents of
any kind.
Add
• Do not bend the disc. Bending discs may prevent proper
reading and writing of data, and may further result in
malfunction.
Using USB Memory
704 (edit)
• When connecting USB memory, make sure to press it until
it is fully inserted.
705 (edit)
• Never touch the terminals of the USB memory. Also,
avoid getting the terminals dirty.
708
• USB memory is constructed using precision components;
handle the cards carefully, paying particular note to the
following.
• To prevent damage to the USB memory from static
electricity, be sure to discharge any static electricity
from your own body before handling the USB
memory.
• Do not touch or allow metal to come into contact with
the contact portion of the USB memory.
• Do not bend, drop, or subject USB memory to strong
shock or vibration.
• Do not keep USB memory in direct sunlight, in closed
vehicles, or other such locations (storage temperature:
0 to 50 ˚C).
• Do not allow USB memory to become wet.
• Do not disassemble or modify the USB memory.
Add
• Insert the USB memory in the Ext Memory port evenly
and without undue force. Forcing the USB memory may
damage the Ext Memory port.
Add
• Do not insert any object other than the USB memory (e.g.,
wires, coins, other types of disks, etc.) in the Ext Memory
port. This may damage the Ext Memory port.
Add
• Do not subject the Ext Memory port cover or connected
USB memory to excessive stress.
Add
• Close the USB memory cover when using the USB
memory for extended periods.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you, and congratulations on your choice of the Roland RG-3 Digital Grand Piano.
The RG-3 is sure to be highly appreciated, not only for the authentic piano performances it offers, but also for its
extensive selection of player piano functions.
In order to enjoy reliable performance of your new keyboard for many years to come, please take the time to read
through this manual in its entirety.
Main Features
Piano Sounds with Rich Resonance and Wide-Ranging Expressiveness
• The stereo sampling piano sound generator realistically reproduces even the sound of the hammers striking the
strings, producing the tones of a high-quality concert grand piano.
• Maximum polyphony of 128 notes ensures that you can use the pedal freely without running out of notes.
“Ivory Feel” Keyboard Provides Grand Piano Touch and Feel
• The RG-3 features an “ivory feel” keyboard, which thanks to the latest technology, reproduces the comfortable
touch and feel of ivory (used for the white keys) and ebony (used for the black keys), materials reputed to be the
best for use for piano keyboards. The white keys are made using a two-piece construction consisting of a surface
material added to the basic key material. They have a natural appearance and just the right rigidity and response.
• The RG-3 promises superior performance with features such as Progressive Hammer Action II (PHA II), which
reproduces the touch of a grand piano and provides a heavier feel in the lower registers, and lighter, quicker
response in the upper registers, while also accurately reproducing the distinctive clicking feel that occurs when
the keys are played gently (escapement).
• The instrument has been treated to provide antibacterial protection, so you can enjoy long years of clean, worry-
free use.
Roland Digital Grand Brings Refinement to Interior Style
• The RG-3 exhibits elegance in form with a beautiful black, mirror-like surface. With features just like those found
on an acoustic grand, such as a lid that opens and closes and retractable music rest, this instrument is a perfect
match for lounge or living room.
• The simple, modern, and stylish panel design makes switching tones and making settings a snap.
Full Complement of Player Piano Functions
• The RG-3 comes pre-programmed with internal jazz and classical song data.
You can also connect a commercially available USB CD drive or optional floppy disk drive to play CD-ROMs
containing saved SMF files, audio CDs, and a variety of other song data. What’s more, you can add to your
collection of song data by copying songs stored on USB memory, on floppy disks, and on CD-ROMs to the RG-
3’s “Favorites.”
• Also included is a convenient remote control, which you can use for selecting songs, adjusting volume balances,
and even for switching the images that appear in external displays—simply and easily.
You can connect an external display or television set to the RG-3 for enlarged displays of the Song Select screen,
karaoke screen (lyrics screen), notation, and even slide shows.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Instrument Endowed with Superior Basic Functions
• The RG-3 also is programmed with 20 carefully selected performance tones, including two types of grand piano
tones, which you can select according to your own taste. What’s more, the settings for the “key touch,” “hammer
response,” and other precision tone adjustment settings that performers demand can be stored in the RG-3 itself.
• On top of this, a newly designed sound system puts the focus on the sound of the piano to achieve a luscious,
natural piano sound.
Professional-Level Features and Specifications
• The RG-3 also includes a lid lock feature to prevent tampering during automatic performances and an Ext
Memory port lock to prevent theft of the connected USB memory.
• Since the RG-3 is a digital instrument, it has no strings and therefore requires no tuning.
• You can connect an external display or television to the piano to run slide shows using whatever images you
prefer and, with a microphone connected, you can add echo and harmonies to microphone vocals and use the
Transformer function to change the sound of the vocals.
■ Conventions Used in This Manual
This manual uses the following conventions in the interest of simpler, more concise instructions.
• Button names are enclosed in square brackets “[ ]”, as in [Song] button.
• An asterisk (*) or a
at the beginning of a paragraph indicates a note or precaution.
NOTE
These should not be ignored.
• (p. **) refers to pages within the manual.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Main Features .............................................................................................................................9
Front Panel.................................................................................................................................15
Jack Panel (RG-3’s Bottom Left Panel).................................................................................16
RG-3’s Bottom Right Panel ....................................................................................................17
Opening and Closing the Top...............................................................................................18
Opening and Closing the Lid ................................................................................................19
Connecting the Pedal Cord and the Power Cord...............................................................19
Turning the Power On and Off.............................................................................................20
Turning Off the Power....................................................................................................................... 20
Adjusting the Sound’s Volume and Brilliance..................................................................20
About the Pedals ......................................................................................................................20
Connecting Headphones ........................................................................................................21
Connecting a Microphone......................................................................................................21
Connecting USB Memory.......................................................................................................22
About the Screens ....................................................................................................................23
Look at What You Can Do with the RG-3!..........................................................................24
Listening to Songs....................................................................................................................25
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Listening to Songs on USB Memory and Floppy Disks................................................................ 31
Using the Remote Control......................................................................................................32
Changing the Song Tempo.....................................................................................................36
Using the Karaoke Feature.....................................................................................................36
Copying Songs..........................................................................................................................40
Copying Songs Stored on USB Memory,
Chapter 2.
Connecting an External Display ...........................................................................................45
Making the Connections.................................................................................................................... 45
Connecting a Television.........................................................................................................47
Making the Connections.................................................................................................................... 47
When Using a VIMA CD-ROM (VIMA TUNES)........................................................................... 51
Changing the Background for the Lyrics Screen...............................................................52
Performing with a Variety of Sounds..................................................................................53
Changing the Volume Balance of the Layered Tones (Layer Balance)....................................... 54
Making Fine Adjustments to the Piano Sound..................................................................55
Changing the Timing of Sounds
Producing the Resonance of the Strings
Producing the Resonance of the Strings
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Changing the Pitch of the Keyboard Sound (Transpose) ................................................61
Tuning to Other Instruments’ Pitches (Master Tuning) ..................................................63
Setting the Tuning Curve (Stretched Tuning) ...................................................................64
Changing the Tuning ..............................................................................................................65
Adding Reverberation to the Sound (Reverb) ...................................................................69
Assigning Functions to Pedals ..............................................................................................70
Remembering the Settings
Even When the Power is Turned Off (Memory Backup).................................................73
Restoring the Factory Settings (Factory Reset)...................................................................74
Notes Regarding Recording.............................................................................................................. 75
Recording Performances.........................................................................................................75
Play Back the Recorded Performance.............................................................................................. 76
Saving Recorded Performances.............................................................................................77
Saving Performance Settings (User Program) ....................................................................80
Calling Up Saved User Programs..........................................................................................81
Saving the User Program Sets................................................................................................82
Loading Saved User Program Sets........................................................................................84
Deleting Saved User Program Sets.......................................................................................86
Using the Pedal to Switch User Programs...........................................................................88
Preventing Changes to the Current Settings (Panel Lock)...............................................89
Making Detailed Settings ......................................................................................................89
Changing the Remote Control Settings...............................................................................90
Changing the CD Settings......................................................................................................91
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Using the V-LINK Function...................................................................................................94
Playing the Automatic Demos...............................................................................................94
Changing the Notation Display Settings ............................................................................96
Changing the Infrared Transmission Function Settings..................................................97
Connecting to Audio Equipment..........................................................................................98
Making the Connections.................................................................................................................... 98
Connecting MIDI Devices......................................................................................................99
Making the Connections.................................................................................................................... 99
Making MIDI-related Settings............................................................................................100
Sending Tone Change Messages
(Program Change/Bank Select MSB/Bank Select LSB).............................................................. 101
Connecting to the Computer................................................................................................103
Making the Settings for the USB Driver...........................................................................103
Troubleshooting.....................................................................................................................104
Error Messages........................................................................................................................106
Tone List ..................................................................................................................................107
Internal Song List...................................................................................................................108
Parameters Stored to Internal Memory..............................................................................109
Parameters Stored in the User Program........................................................................................ 109
Music Files That the RG-3 Can Use....................................................................................110
MIDI Implementation Chart ...............................................................................................111
Main Specifications...............................................................................................................112
Index.........................................................................................................................................114
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
Front Panel
fig.00-010
12
1
2
3
4
5
6 7 8 9 10 11
1
2
3
4
[Power] switch
8
9
[
] (Select +) button
Press this button while the Song Select screen is
[Volume] knob
When the Function screen is displayed, this button is
used to select the item for which settings are to be
[Brilliance] knob
[
] (Value -) button
Press this button while the Song Select screen is
Tone buttons
They are used to choose the kinds of tones (tone
Press this button while the Function screen is displayed
[Piano 1] button
[Piano 2] button
[Harpsichord] button
[Vibraphone] button
[E.Piano] button
10 [
] (Value +) button
Press this button while the Song Select screen is
Press this button while the Function screen is displayed
5
6
Display
Tone and song names and the values of various
11 [Enter] button
Press this button while the Function screen is open to
make even more detailed settings.
[Function] (Exit) button
You can make various different settings in the Function
screen, including settings for the master tuning and
temperaments.
12 Infrared Receiver
Point the remote control at this sensor when using the
7
[Song] (Select -) button
genre is switched each time you press this button while
When the Function screen is displayed, this button is
used to select the item for which settings are to be
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
Jack Panel (RG-3’s Bottom Left Panel)
fig.00-020
3
4
5
6
2
1
7
11
8
9
10
12
1
2
3
AC Inlet
9
MIDI In/Out connectors
Connect to external MIDI devices to exchange
Pedal connector
10 Mic jack
Input jacks
You can connect other sound generating devices or
audio equipment here and have their sound be played
11 Mic Volume knob
12 Phones jacks
4
5
Output jacks
These jacks can be connected to your audio system to
Video Out jack
Connect a television here. This allows you to display
the Song Select screen, slide show, lyrics, and notations
6
Ext Display connector
Connect a external display here. You can display the
Song Select screen, slide show, lyrics, and notations on
7
8
LCD Contrast knob
USB connector
You can connect a computer and exchange
performance data between the instrument and the
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
RG-3’s Bottom Right Panel
fig.00-030
■ Installing the Floppy Disk Drive
Attach the floppy disk drive as shown the figure, using
the mounting holes on the RG-3‘s bottom panel.
4
3
*
For details of the attachment, refer to the owner’s manual of
the floppy disk drive.
fig.00-040
1
2
1
2
Ext Memory port
Ext Memory port cover
You can ensure the cover remains closed when you
*
There are two groups of mounting holes. You can use either
group.
*
Be sure to close the cover of the Ext Memory port after
connecting USB memory to the Ext Memory port. If the
cover is left open, someone could get hurt if their legs bump
into it; the cover could be damaged as well.
3
4
Ext Memory port cover lock
You can lock the Ext Memory port cover to prevent
theft of the USB memory connected to the Ext Memory
FDD connector
You can connect a commercially available CD drive or
optional floppy disk drive here.
NOTE
CD drives that draw their power from the USB
connector cannot be used.
*
Use floppy disk drive available from Roland.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
Opening and Closing the Top
Do not move the piano with the top in the open position.
The top stick may disengage from the slip, causing the
top to fall.
Raising the Music Rest
fig.00-0330
B
C
Always be sure to raise the music rest in the upright
position before opening and raising the piano top.
Be sure to fold down the music rest in the upright
position after closing the piano top.
1. Gently raise the music rest, then secure it in place.
2. To collapse the music rest, fold in the metal
fittings while supporting the music rest with both
hands and gently fold down the music rest.
fig.00-0310
(1)
(2)
(2)
◆
To close the top, reverse the opening procedure.
Open the Top board
About the Topsticks and Topslip
The RG-3 has two topsticks, each a different length.
Children must not be permitted to open or close the top
on their own—adult supervision is required.
You can use the different topsticks to change the amount
the top is left open.
fig.00-0340
Long top stick
3. Lift the right front (the upper note side: A in the
figure) of the board with both hands, fold it up.
fig.00-0320
Short top stick
The topsticks and topslip work together as illustrated
below.
A
The long top stick:
The short top stick:
for inner top slip (B)
for outer top slip (C)
If you use the wrong top slip, the top stick could slip out
of the top slip, causing the top to fall. Make sure that the
end of the top stick is inserted securely into the top slip.
4. While holding up the top with one hand, lift up
the top stick and insert its end into the
appropriate top slip.
When opening the top, be careful not to open it too far.
Opening the top at an angle in excess of 30 degrees may
damage the unit, or cause the top to drop. Also, before
opening the top, make sure that no one is in the path of
the top as it is opened.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
Opening and Closing the Lid
Connecting the Pedal Cord
fig.00-0350
and the Power Cord
fig.00-370
1. To open the lid, hold handles with both hands
and lift it straight up. Then, slide it to the rear.
2. To close the lid, hold handles with both hands
and slowly pull it forward until it stops. Then,
gently lower it into place.
• When opening and closing the lid, be careful not to let
your fingers get caught. Small children should use it
only under the supervision of an adult.
• When moving the piano, for safety’s sake be sure to close
the lid first.
• Make sure you don’t have anything (such as sheet
music) on the keyboard when you close the lid.
■ Using the Lid Lock
You can lock the keyboard lid with the lid covering the
control panel (front panel) to prevent it from being opened,
thus avoiding inadvertent changes during automatic
performances.
1. Plug the pedal cord into the Pedal jack in the jack
panel on the RG-3’s bottom left panel.
1. Lower the lid until the control panel (the front
2. Connect the supplied power cord to the AC inlet
panel) is covered.
located in the jack panel.
2. Turn the lid lock under the piano as shown in the
3. Affix the cord clamps to points A, B, and C
(recommended) as shown in the figure below,
then secure the pedal cord with the clamps.
figure below to lock the lid.
fig.00-0360
Lid Lock released
Lid Lock engaged
*
You can secure the power cord together with the pedal cord.
fig.00-0380
NOTE
Cord Clamp
(using double-sided tape)
Using undue force to open the lid when it is locked may
damage the lid and/or the lock.
Turning the lid lock when the lid lock is released while
the keyboard lid is open may make the keyboard lid
prone to closing. Always confirm that the keyboard lid is
covering the control panel before locking the lid.
4. Plug the power cord into an AC outlet.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
Turning the Power On and Off
• The mark at the top of the [Volume] knob indicates the
volume level typically produced by an acoustic piano.
This is usually the most appropriate volume for your
piano performances.
NOTE
Turn on power to your various devices in the order
specified. By turning on devices in the wrong order, you
risk causing malfunction and/or damage to speakers
and other devices.
• You can adjust the volume with the remote control. For
■ Turning On the Power
1. Turn the [Volume] knob all the way down.
About the Pedals
The pedals have the following functions, and are used
mainly for piano performance.
fig.00-0410
2. Press the [Power] switch.
When you turn on the power to the RG-3, the front panel
display appears as shown below.
fig.00-0391d
After a few seconds, you will be able to play the
keyboard to produce sound.
Use the [Volume] knob to adjust the volume.
Soft Pedal
Damper Pedal
NOTE
Sostenuto Pedal
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required
before the unit will operate normally.
Damper pedal (right pedal)
While this pedal is pressed, notes will be sustained even
after you take your fingers off the keys.
■ Turning Off the Power
1. Turn the [Volume] knob all the way to the left.
2. Press the [Power] switch.
The length of the sustain changes subtly according to the
extent to which the pedal is depressed.
On an acoustic piano, holding down the damper pedal
will allow the remaining strings to resonate in sympathy
with the sounds that you played from the keyboard,
adding a rich resonance.
The front panel display goes blank, and the power is
turned off.
*
If you need to turn off the power completely, first turn off the
[POWER] switch, then unplug the power cord from the power
The RG-3 simulates this Damper Resonance.
→ You can change the amount of resonance applied with the
Adjusting the Sound’s Volume
and Brilliance
Sostenuto pedal (center pedal)
This pedal sustains only the sounds of the keys that were
1. Turn the [Volume] knob to adjust the overall
already played when you pressed the pedal.
volume.
Soft pedal (left pedal)
2. Turn the [Brilliance] knob to adjust the
When you hold down this pedal and play the keyboard,
the sound will have a softer tone.
brightness of the sound.
fig.00-0400
The softness of the tone can be varied subtly by the
depth to which you press the pedal.
→ You can assign functions to the left and center pedals. Refer to
Min
Max
Mellow
Bright
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
Connecting Headphones
Connecting a Microphone
The RG-3 has two jacks for plugging in headphones. This
allows two people to listen through headphones
simultaneously, making it very useful for lessons and
performing piano pieces for four hands. Additionally, this
allows you to play without bothering others around you,
You can connect a microphone into the Mic jack, and enjoy
karaoke with the RG-3.
fig.00-0430
even at night.
fig.00-0420
1. Connect the microphone to the Mic jack located
in the jack panel on the RG-3’s bottom left panel.
2. Rotate the Mic Volume knob on the right side of
the Mic jack to adjust the volume level for the
microphone.
1. Plug the headphones into a Phones jack located
in the jack panel on the RG-3’s bottom left panel.
Connecting headphones will automatically mute the
sound from the internal speakers.
Some Notes on Using a Microphone
• Be careful of high volume levels when using microphone
late at night or early in the morning.
The headphone volume is adjusted by the [Volume]
knob of the RG-3.
NOTE
• When connecting a microphone to the RG-3, be sure to
lower the volume. If the volume control is too high when
the microphone is plugged in, noise may be produced by
the speakers.
Use Stereo headphones.
Some Notes on Using Headphones
• To prevent damage to the cord, handle the headphones
only by the headset or the plug.
• Howling could be produced depending on the location
of microphone relative to speakers. This can be remedied
by:
• Connecting the headphones when the volume of
connected equipment is turned up may result in damage
to the headphones. Lower the volume on the RG-3
before plugging in the headphones.
• Changing the orientation of the microphone.
• Relocating microphone at a greater distance from
speakers.
• Listening at excessively high volume levels will not only
damage the headphones, but may also cause hearing
loss. Use the headphones at a moderate volume level.
• Lowering volume levels.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
3. Press on the front part of the Ext Memory port
Connecting USB Memory
cover to close the cover.
You can connect USB memory (sold separately) to the RG-3’s
Ext Memory port. Connecting external USB memory enables
you to do the following:
NOTE
Use USB memory available from Roland. Proper
operation cannot be guaranteed if other external
memory products are used.
• Play back songs stored on the USB memory.
• Save songs recorded on the RG-3 to the USB memory.
Locking the Ext Memory Port Cover
You can lock the Ext Memory port cover to prevent theft of
the USB memory connected to the Ext Memory port.
• Copy songs in the USB memory to the RG-3’s User
memory, allowing the songs to be called up simply and
easily.
• The images saved to the USB memory are displayed as a
slide show.
1. Connect the USB memory (refer to previous
section).
• User Programs registered in the RG-3 saved to the USB
memory.
2. Press on the front part of the Ext Memory port
cover to close the cover.
3. Using a screwdriver, remove the anti-theft lock
■ Connecting the Memory
screws (two screws) to the side of the Ext Memory
NOTE
port.
fig.00-0450
Always be sure to use the following procedure when
connecting USB memory.
1. Press the Ext Memory port cover at the right of the
RG-3’s bottom panel to open the cover.
Press the front of the cover to open it.
fig.00-0431
4. Turn the anti-theft lock as shown in the figure
below so it is oriented in the direction opposite of
that when removed, then tighten the screws.
fig.00-0470
2. Connect the USB memory to Ext Memory port.
*
Carefully insert the USB memory all the way in—until it is
firmly in place.
fig.00-0440
NOTE
Be sure to replace removed screws when securing the
anti-theft lock.
USB Memory
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
About the Screens
Immediately after the power is turned on, the Song Select
screen like the one below is displayed.
■ Main Screens
Song Select Screen
When you press the [Song] button, the following screen
is displayed. Each time you press the [Song] button in
this screen, the song genre is switched.
fig.00-0480d
Function Screen
Press the [Function] (Exit) button; the indicator lights,
and the following screen appears.
fig.00-0490d
Tone Screen
Press the Tone button; the indicator lights, and the
following screen appears.
fig.00-0500d
■ Adjusting the Contrast of the
Screen
1. Turn the LCD Contrast knob located in the jack
panel on the RG-3’s bottom left to adjust the
brightness of the display.
fig.00-0510
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Look at What You Can Do with the RG-3!
● Listen to the Internal Songs
The various internal songs programmed in the RG-3 are categorized into “Jazz” and “Classical” genres.
You can play back the songs in these genres in a variety of ways, playing all the songs in sequence or
randomly, or just playing songs individually.
● Listening to Music from CDs
You can connect a commercially available CD drive and play back CD-ROMs on which SMFs have been
saved as well as audio CDs. You can also use VIMA CDs (VIMA TUNES) sold by Roland.
● Listen to Songs on Floppy Disks and USB memory
You can connect a commercially available USB memory or floppy disk drive and play back SMF music
files saved on USB memory and floppy disks. You can also copy song data recorded with the RG-3.
● Store Songs in the “Favorites”
The RG-3’s “Favorites” section is programmed at the factory with a tone demo. Listen to the tone demo
and check out the various characteristics of the different tones.
You can also store recorded songs to the “Favorites,” and you can even copy songs stored on USB
memory and floppy disks to the “Favorites.”
Songs saved in the “Favorites” remain stored in the instrument even while the power is turned off,
making this a convenient place to save songs you listen to frequently.
● Easy-to-Use Remote Control Included
You can use the included remote control to start and stop the current performance and switch songs.
You can also use the remote control to select what is to be displayed on an external screen or television
set connected to the RG-3 and assign other functions to the remote control’s buttons to make operating
the RG-3 even simpler.
● Connect a Microphone for Karaoke Performances
Connect a microphone to the RG-3, and you are ready to enjoy karaoke. You can change the key of the
song to match the singer’s voice and adjust the amount of echo applied to the microphone input.
● Show Your Favorite Images on a Connected Display or Television
You can connect an external display or television set to the RG-3 and display the Song Select screen, lyrics
and notations, and even slide shows of your favorite images. You can also use the remote control to
switch the images appearing in the connected external display or television.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Listening to Songs
The RG-3 features a variety of internal songs. The internal songs are
categorized into “Jazz” and “Classical” genres.
About Audio Files
Try giving these songs a listen.
Audio files in the following
format can be played back:
You can also play back the following kinds of songs (data).
• SMF music files
•“.WAV” extension
•16-bit linear
(when a USB memory, CD drive, or floppy disk drive is connected)
• Audio Files (when a USB memory or CD drive is connected)
•Sampling rate of “44.1 kHz”
•Stereo
• Audio CDs (when a CD drive is connected)
You cannot use the
following functions in
playing back audio files.
■ [Song] Button Functions
Each press of the [Song] button selects the next available song genre.
fig.01-010
* Saving or performing other
procedures during playback of
audio files may cause the song
to stop while it is playing.
● Jazz
● Classical
● Favorites
This appears when songs are contained in the “Favorites.”
● CD
This appears when you have a CD drive connected and a CD is in the drive.
● Floppy Disk
This appears when you have a floppy disk drive connected and a floppy disk is
in the drive.
● Ext Memory (songs in the USB memory connected to the Ext Memory port)
This appears when you have a USB memory connected.
What are the “Favorites?”
This is the area of memory where you can save copies of performances recorded with the RG-3, songs saved on
CD-ROMs, songs stored in the USB memory connected to the RG-3’s Ext Memory port, and other songs.
After copying songs to the “Favorites,” you can then select the copied songs simply by pressing the [Song] button
and selecting “Favorites” as the song genre.
The RG-3 features a User Memory (the RG-3’s memory) area where the following types of data are stored.
• Content registered in the “Favorites”
To delete the content of the User Memory and restore the memory to the default factory settings, refer to
You can also delete these tone demos and overwrite them with other songs, which can then be saved.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
■ Listening to the Tone Demos
1.
Press the [Song] button one or more times to select “Favorites” as
the genre.
fig.01-011d
NOTE
Songs saved to the
“Favorites” are deleted
when the User Memory is
initialized.
2.
Press the [
] button to start playback of the tone demos.
You can select the tone demo to play back by pressing the [
button.
] or [
]
Save any songs you want to
retain by copying them to
USB memory or Floppy
3.
Press the [
demos.
] button once more to stop playback of the tone
You can delete tone demos in the “Favorites” and overwrite them by saving
other songs in their place. If you want to play back tone demos after they
have been deleted, initialize the User Memory to restore the factory settings
■ Listening to the Internal Songs
1.
Press the [Song] button one or more times to select the genre you
want.
The internal song genres are “Jazz” and “Classical.”
fig.01-020d
NOTE
If any previously recorded
song data is present, the
message “Delete User Song
OK?” appears in the
display.
If using the remote control, press the remote control’s [INTERNAL] button.
The internal song genre selection can be switched between “Jazz” and
“Classical” by pressing the [INTERNAL] button.
If you want to delete the
existing song data, press
the [Enter] button.
“Jazz” → “Classical” → “Jazz”....
If you do not want the song
data to be deleted, press the
[Function] (Exit) button,
and save the song to the
“Favorites,” USB memory,
2.
Press the [
] button to start playback of the internal songs.
Songs in the selected genre are played back.
being played back is finished, the next song starts playing automatically.
After all of the songs in the genre have been played, playback automatically
resumes from the first song in the genre. When the RG-3 is set to play back
You can select the next song by pressing the [
beginning of the song or the previous song by pressing the [
] button, and return to the
] button.
3.
Press the [
songs.
] button once more to stop playback of the internal
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Playing Back One Song
To play a single selected song, use the following procedure.
You can save this setting in
the RG-3’s memory using
the Memory Backup
1.
2.
Press the [Function] (Exit) button, getting its indicator to light.
Press the [Song] (Select -) button or [
display the PLAY screen.
] (Select +) button to
fig.01-030d
3.
4.
Press the [Song] (Select -) button or [
the value for “Mode” to flash.
] (Select +) button to get
fig.01-040d
Press the [
] (Value -) button or [
] (Value +) button to
select “One Song.”
Value
Description
All of the songs in the genre are played back in sequence, start-
ing from the selected song.
All Song
When the final song in the selected genre is finished playing,
playback then automatically resumes from the first song in that
genre.
Only the selected song is played.
Playback stops when the song is finished.
One Song
5.
Press the [Function] (Exit) button so the indicator goes out.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
■ Listening to Songs on CDs
You can play back audio CDs and CD-ROMs containing saved SMF music
files.
What is VIMA?
Presented by Roland, VIMA
represents an entirely new
concept in keyboards.
* You can also play songs on VIMA CD-ROMs (VIMA TUNES) sold by Roland.
It lets you connect LCD
televisions, video cameras,
portable audio players, and
other devices, enabling you
to enjoy music and video
whether or not you have
experience in performing
music.
Precautions Concerning Use of the CD
• You cannot play back CD-R/RW disks to which audio tracks have been
added or CDs containing both audio tracks and data (CD Extra).
• The RG-3 is capable of playing back only commercial CDs that conform
the official standards—those that carry the “COMPACT DISC DIGITAL
AUDIO” logo.
• The usability and sound quality of audio discs that incorporate
copyright protection technology and other non-standard CDs cannot be
guaranteed.
With CD-ROMs for use with
VIMA (VIMA TUNES), you
can enjoy running Slide
with the playback of songs.
• For more detailed information on audio discs featuring copyright
protection technology and other non-standard CDs, please consult the
disc vendor.
• You cannot save songs and styles to CDs, and you cannot delete songs
or styles recorded to CDs. Furthermore, you cannot format CDs.
Connecting a CD Drive
* CD drives that draw their power from the USB connector cannot be used.
NOTE
For information on how to
perform the following CD-
drive operations, refer to
the owner’s manual for the
drive.
1.
Switch off the power to this instrument and the CD drive to be
connected.
2.
Connect the USB cable included with the CD drive to the FDD
• Switching the power on
and off
connector on this instrument.
fig.01-041
• Inserting and ejecting a
CD
A list of the CD drives that
have been tested and found
to be compatible is available
on the Roland website.
http://www.roland.com/
3.
Turn on the power to this instrument.
4.
Turn on the power to the connected CD drive.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Playing Back a Song
1.
Place the CD you want to play in the CD drive.
(1) Press the eject button and open a disc tray.
(2) Put a CD on a disc tray.
(3) Press the eject button again to close the disc tray.
NOTE
* Reading of data from the CD starts when the CD is inserted in the drive.
It may take a few moments to complete reading of the data.
If any previously recorded
song data is present, the
message “Delete User Song
OK?” appears in the
display.
2.
Press the [Song] button one or more times to select “CD” as the
genre.
If you want to delete the
existing song data, press
the [Enter] button.
If using the remote control, press the remote control’s [EXTERNAL] button,
then select “CD” as the genre.
The following screen appears.
If you do not want the song
data to be deleted, press the
[Function] (Exit) button,
and save the song to the
“Favorites,” USB memory,
fig.01-070d
When Selecting Songs in a Folder
1. Press the [
] button or [
] button to select a folder.
2. Press the [
] button.
The first song in the folder is displayed.
3. Press the [
] button or [
] button to select a song.
* Depending on the number of songs contained in a folder, this may take some time.
If a Folder Contains Further Folders and Song Data
1. Press the [
] button to display “Song No. 1.”
2. Press the [
] button.
The name of the folder appears in the screen.
fig.01-080d
If a folder contains other folders, press the [
] button to switch the screens.
3. Press the [
] button.
The first song in the folder is displayed.
To exit a folder:
1. Press the [
] button one or more times until “↑Up” appears in the screen.
2. Press the [
] button.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
3.
Press the [
] button to start playback of the CD’s songs.
You can start and stop
playback of songs on CDs
with the remote control’s
The songs on the CD are played.
being played back is finished, the next song starts playing automatically.
After all of the songs on the CD have been played, playback automatically
resumes from the beginning of the CD.
[
] button.
You can also use the remote
control’s [ ] button to
advance to the next song
and [ ] button to select
automatically when the song is finished.
the previous song.
You can select the next song by pressing the [
beginning of the song or the previous song by pressing the [
] button, and return to the
] button.
If you want to playback at
4.
Press the [
] button once more to stop playback of the songs.
Turning Off the Power (When a CD Drive Is Connected)
NOTE
If you are unable to eject the
CD, try the following
procedure.
1.
Stop playback if the CD is being played back.
If after these steps you are
still unable to get the CD to
eject, read the CD drive
owner’s manual.
2.
Eject the CD.
(1) Press the eject button and open a disc tray.
(2) Eject a CD on a disc tray.
1. Turn off the power to all
(3) Press the eject button again to close the disc tray.
* Firmly press the CD drive's Eject button.
* It may take some time for the CD disk to be ejected.
connected devices.
2. Turn on the RG-3.
3. Turn on the CD drive.
4. Wait a few moments after
the power is switched on,
then firmly press the eject
button.
3.
Lower the piano’s volume all the way, then switch off its power
4.
Turn off the power to the CD drive.
NOTE
Before detaching the cable for
the CD drive, make sure that
the power for all equipment
has been switched off.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
■
Listening to Songs on USB Memory and Floppy Disks
NOTE
You can connect a USB memory or floppy disk drive and listen to songs
saved on USB memory and floppy disks.
Use only USB memory and
floppy disk drives sold by
Roland. Operation cannot be
guaranteed when products
other than these are used.
Floppy Disk
Proper operation cannot be
guaranteed if other external
memory products are used.
1.
Insert the floppy disk containing the songs you want to play to the
floppy disk drive.
2.
Press the [Song] button one or more times to select “Floppy Disk”
as the genre.
NOTE
If using the remote control, press the remote control’s [EXTERNAL] button,
then select “Floppy Disk” as the genre.
If any previously recorded
song data is present, the
message “Delete User Song
OK?” appears in the
display.
USB Memory
1.
Connect the USB memory containing the songs you want to play
to the Ext Memory port.
If you want to delete the
existing song data, press
the [Enter] button.
2.
Press the [Song] button one or more times to select “Ext Memory”
as the genre.
If you do not want the song
data to be deleted, press the
[Function] (Exit) button,
and save the song to the
“Favorites,” USB Memory,
If using the remote control, press the remote control’s [EXTERNAL] button,
then select “Ext Memory” as the genre.
The following screen appears.
fig.01-090d
You can start and stop
playback of songs saved on
USB memory with the remote
control’s [
You can also use the remote
control’s [ ] button to
advance to the next song and
] button to select the
] button.
3.
4.
Press the [
] button.
The song is played back.
being played back is finished, the next song starts playing automatically.
After all of the songs on the USB memory or floppy disk have been played,
playback automatically resumes from the beginning of the USB memory or
floppy disk.
[
previous song.
automatically when the song is finished.
If you want to playback at
You can select the next song by pressing the [
beginning of the song or the previous song by pressing the [
] button, and return to the
] button.
Press the [
] button once more to stop playback of the songs.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Using the Remote Control
For more information on the
remote control button
You can use the included remote control to easily start and stop
performances and switch songs. You can also use the remote control to
select what is to be displayed on an external screen or television set
connected to the RG-3 and assign functions to the buttons used in operating
the remote control.
■ Installing Batteries in the Remote Control
Install the batteries provided in the remote control.
fig.01-100
Remote Control (Rear)
Battery
Cover
1.
Open the battery cover on the back of the remote control.
NOTE
2.
Insert the supplied AA batteries, as shown in the figure of the
remote control.
Be careful to observe the
correct polarity (+, - direction)
when installing the batteries.
3.
Close the battery cover.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
■ How to Use the Remote Control
When using the remote control, aim the remote control at the infrared
receiver, keeping in mind the range of operation (below).
fig.01-110
Front View
Infrared Receiver
Top View
Range of operation
Distance:
4 m (approximately 13 feet)
Remote
Control
Angle:
40 degrees to the left and right
of the receiver.
Precautions Concerning Use of the Remote Control
• The remote control is able to transmit only one operation at a time.
• The remote control may not operate even within the range of operation
if there is an obstacle between it and the main unit.
• Malfunctions may occur if you use the remote near a device that
produces infrared light, or if you use another infrared remote control
nearby.
• The life of the battery depends on the amount and conditions of use. If
the operational range of the remote control decreases, change the
batteries.
• If you will not be using the remote control for a long period of time,
remove the batteries.
• The responsiveness of the remote control may suffer if the remote
control is within the glare of any spotlights or exposed to other strong
light.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
■ About the Remote Control
fig.01-120
Infrared Emitter
Selecting the Tone
2
3
Switching the Screen of
1
Returning to the
Piano Tone
the External Display or
Television
Selecting the Song Genre
4
Starting and Stopping
Songs, Selecting
Previous and
5
Following Songs
Changing the Volume
7
9
Muting the Sound
6
8
Changing the Tempo of
the Song
Using the Function
Assigned to the Buttons
Changing the key of
the song
10
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Button
Explanation
Switches the screens appearing in the connected external display or television
in the external display or television.
DISPLAY
1
This switches the tone of the left-hand part, right-hand part, and User part (the
part to which performances recorded with the RG-3 are saved).
TONE
2
3
This returns the [TONE] button to the original settings.
The left-hand part, right-hand part, and User part revert to the piano tone.
CANCEL
Selects the internal song genre. The internal song genre selection changes when
the [INTERNAL] button is pressed.
INTERNAL
“Jazz” → “Classical” → “Jazz” ....
Selects the “Favorites” genre.
FAVORITES
* This group cannot be selected if no songs have been saved to the “Favorites.”
4
This selects from the “CD,” “Floppy Disk,” and “Ext Memory” genres.
The genre switches with each press of the button, alternating between “CD”/
“Floppy Disk” and “Ext Memory.”
EXTERNAL
* You cannot select this group when there is no CD drive, floppy disk drive, or USB
memory connected.
When you press the [
is selected.
] button while the song is stopped, the previous song
Pressing the [
of that song.
] button while a song is playing returns you to the beginning
5
This starts and stops playback of the song.
Playback alternately starts and stops each time you press the [
] button.
When you press the [
] button, the next song is selected.
MUTE
This mutes all of the sounds.
You can adjust the volume.
Press the VOL [-] button to decrease the volume, and press the VOL [+] button
to increase the volume.
6
7
VOL [-] [+] (Volume)
You can use the function assigned to this button.
With the factory settings, the Random Playback On/Off is assigned to this but-
ton.
FUNC 1
8
You can use the function assigned to this button.
FUNC 2
With the factory settings, the Equalizer On/Off is assigned to this button.
This adjusts the tempo.
Press the TEMPO [-] button to slow down the tempo, and press the TEMPO [+]
button to quicken the tempo.
TEMPO [-] [+]
9
* You cannot change the tempos for audio CDs.
Transposes the key of the song being played.
Press the TRANSPOSE [-] button to lower the key; press the TRANSPOSE [+]
button to raise the key.
TRANSPOSE [-] [+]
10
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Changing the Song Tempo
NOTE
You cannot change the
tempos for audio CDs.
This changes the song tempo. Changing the tempo has no effect on the pitch
of the notes. And you can change the tempo even when the song is in
progress.
1.
Press the remote control’s TEMPO [-] or TEMPO [+] button to
adjust the tempo of the song.
The tempo is indicated in the external display.
The tempo can be adjusted in a range of =10–500.
You can also change the tempo during playback.
Pressing the TEMPO [+] button once increases the tempo by one unit.
Holding down the button increases the tempo continuously.
Pressing the TEMPO [-] button once decreases the tempo by one unit.
Holding down the button makes the tempo change (slow down)
continuously.
Using the Karaoke Feature
You can connect an external
display or television to the
RG-3 and have the lyrics of
music files containing lyrics
be displayed on the screen as
the data is played back.
You can connect a microphone to the RG-3 and enjoy singing along as the
music file is played back.
1.
Connect the USB memory containing the songs you want to play
2.
3.
Adjust the volume level and the amount of echo applied.
4.
5.
Adjust the tempo as required with the remote control Tempo [-]
[+] buttons.
6.
7.
The song starts to play when you press the [
] button.
Now sing along with the song.
8.
Playback of the song stops when you press the [
again.
] button
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
■ Changing the Key of the Song Being Played
(Playback Transpose)
You can transpose songs
using the remote control’s
TRANSPOSE [-] and [+]
buttons.
You can play back SMF music files and your own recorded performances
with the notes transposed.
You can also transpose the playback of songs on audio CDs and audio files.
This function lets you change song keys to suit the singer‘s own vocal range.
1.
NOTE
You may find that using
Playback Transpose reduces
the tone quality of the
selected audio CD song or
audio file.
2.
3.
Press the [Function] (Exit) button so the indicator is lit.
Press the [Song] (Select -) button or [
display the TRANSPOSE screen.
] (Select +) button to
fig.01-130d
4.
Press the [Song] (Select -) button or [
the value for “Link” to flash.
] (Select +) button to get
fig.01-140d
5.
6.
Press the [
switch the Link setting to “On.”
] (Value -) button or [
] (Value +) button to
You can set the transposition
separately for the song being
played back and the sounds
from the keyboard by setting
When set to “On,” the song and keyboard are transposed simultaneously.
Press the [Song] (Select -) button or [
] (Select +) button to get
the value for “Keyboard/Playback” to flash.
fig.01-150d
7.
Press the [
] (Value -) button or [
] (Value +) button to
change the key of the song and the notes from the keyboard.
Each time you press the [
the song and the notes from the keyboard are transposed by one semitone.
Pressing the [ ] (Value -) and [ ] (Value +) buttons simultaneously
restores the original value (0).
Value: -6–0– +5 (in semitones).
] (Value -) button or [
] (Value +) button,
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
8.
Press the [Function] (Exit) button so the indicator goes out.
9.
Press the [
] button to start playing the song.
The song is played in the changed key.
* Playback Transpose is cancelled (switched off) when you switch to a different song.
Transposing the Song and Keyboard Separately
You can transpose the song and keyboard sounds separately by setting Link
to “Off.”
4.
Press the [Song] (Select -) button or [
the value for “Link” to flash.
] (Select +) button to get
fig.01-140d
5.
6.
7.
Press the [
] (Value -) button or [
] (Value +) button to
switch the Link setting to “Off.”
fig.01-151d
Press the [Song] (Select -) button or [
] (Select +) button to get
the value for “Plybck” (Playback) to flash.
fig.01-152d
Press the [
change the key of the song.
] (Value -) button or [
] (Value +) button to
The available transposition range varies with the type of song data used.
Song Data
Value
SMF Music Files
Audio CDs/Audio Files
-24–0– +24 (in semitones)
-6–0– +5 (in semitones)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
■ Adding Echo to the Mic Vocals (Mic Echo)
This adjusts the microphone echo when a microphone is connected to the
RG-3.
1.
2.
Press the [Function] (Exit) button so the indicator is lit.
Press the [Song] (Select -) button or [
display the MIC ECHO screen.
] (Select +) button to
] (Select +) button to get
] (Value +) button to
fig.01-160d
3.
Press the [Song] (Select -) button or [
the value for “Type” to flash.
fig.01-170d
4.
5.
Press the [
] (Value -) button or [
change the echo type.
Value
Description
Adds basic reverberations.
Adds reverberations for a karaoke-type echo.
1
2
Press the [Song] (Select -) button or [
the value for “Level” to flash.
] (Select +) button to get
fig.01-180d
6.
7.
Press the [
] (Value -) button or [
] (Value +) button to
change the amount of echo applied to the sound.
Value
0–9
Description
More echo is applied as the value is increased.
No echo is applied to the microphone vocals when the value is
set at “0.”
Press the [Function] (Exit) button so the indicator goes out.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Copying Songs
NOTE
You can copy songs contained in a USB memory connected to the RG-3’s Ext
Memory port, songs on CD-ROMs, and songs saved to floppy disks to the
“Favorites.”
You cannot copy songs on
audio CDs and audio files to
the “Favorites.”
By copying songs to the “Favorites,” you’ll then be able to select the copied
songs easily by selecting the “Favorites” genre from the Song Select screen.
■ Copying Songs Stored on USB Memory,
CD-ROMs, and Floppy Disks to the “Favorites”
1.
Prepare the CD-ROM, USB memory, or floppy disk containing the
song or songs you want to copy.
• Connect the USB memory to the Ext Memory port.
• Insert the CD-ROM in the CD drive or the floppy disk in the floppy disk
drive.
2.
Press the [Function] (Exit) button so the indicator is lit.
3.
Press the [Song] (Select -) button or [
display the FILE screen.
] (Select +) button to
fig.01-230d
4.
Press the [Song] (Select -) button or [
“COPY” is flashing.
] (Select +) button so
fig.01-240d
5.
6.
Press the [Enter] button.
Press the [Song] (Select -) button or [
the “From” setting is flashing.
] (Select +) button so that
fig.01-250d
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
7.
Press the [
change the “From” setting.
] (Value -) button or [
] (Value +) button to
Value
Jazz
Description
Internal songs in the “Jazz” genre are copied to the “Favorites.”
Internal songs in the “Classical” genre are copied to the “Favor-
ites.”
Classical
CD
Songs in the CD-ROM are copied to the “Favorites,” USB mem-
ory, or the Floppy disk.
Songs in the Floppy disk are copied to the “Favorites” or the
USB memory.
Floppy Disk
Ext Memory
Favorites
Songs in the USB memory are copied to the “Favorites” or the
Floppy disk.
Songs in the “Favorites” are copied to the USB memory or the
Floppy disk.
8.
Press the [Song] (Select -) button or [
] (Select +) button so that
the “COPY From” song number is flashing.
fig.01-260d
9.
Press the [
] (Value -) button or [
] (Value +) button to
select the number of the song you want to copy.
10.
Press the [Song] (Select -) button or [
the “To” setting is flashing.
] (Select +) button so that
fig.01-270d
11.
Press the [
select the copy destination.
] (Value -) button or [
] (Value +) button to
Value
Description
Favorites
Floppy Disk
Ext Memory
Copies the song to the “Favorites.”
Copies the song to the Floppy disk.
Copies the song to the USB memory.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
12.
Press the [Song] (Select -) button or [
] (Select +) button so that
the “COPY To” song number is flashing.
fig.01-280d
13.
Press the [
select the copy-destination number.
] (Value -) button or [
] (Value +) button to
NOTE
14.
Press the [Enter] button.
When copying performances
saved to USB memory, do
not remove the USB memory
until copying is finished.
A confirmation message appears in the screen.
fig.01-290d
To return to the original screen without copying the song, press the
[Function] (Exit) button.
15.
16.
Press the [Enter] button once more.
The song is copied.
Press the [Function] (Exit) button so the indicator goes out.
When there is no song assigned to a number, this is indicated in the display in the
following form: “4: (Empty).”
fig.01-300d
If you select a number to which a song is already saved and then attempt to copy to
that number, the following message appears in the display.
fig.01-310d
To delete the saved song and copy the new song to that number, press the [Enter]
button.
If you do not want to delete the saved song, press the [Function] (Exit) button.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
Deleting Songs Saved to the “Favorites,”
USB Memory, and Floppy Disks
Use this procedure to delete songs saved to the “Favorites,” USB memory,
and floppy disks.
1.
Prepare the USB memory or floppy disk containing the song or
songs you want to delete.
• Connect the USB memory to the Ext Memory port.
• Insert the floppy disk in the floppy disk drive.
2.
Press the [Function] (Exit) button so the indicator is lit.
3.
Press the [Song] (Select -) button or [
display the FILE screen.
] (Select +) button to
fig.01-230d
4.
5.
6.
Press the [Song] (Select -) button or [
“DEL” (Delete) is flashing.
] (Select +) button so
fig.01-330d
Press the [Enter] button.
The following screen appears.
fig.01-340d
Press the [Song] (Select -) button or [
] (Select +) button so that
the “Saved Song to Delete” setting is flashing.
fig.01-350d
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Playing Back Songs
7.
Press the [
select “Saved Song to Delete.”
] (Value -) button or [
] (Value +) button to
Value
Description
Favorites
Floppy Disk
Ext Memory
Deletes the songs in the “Favorites.”
Deletes the songs in the Floppy disk.
Deletes the songs in the USB memory.
8.
Press the [Song] (Select -) button or [
the “song number” to flash.
] (Select +) button to get
fig.01-360d
9.
Press the [
select the song to be deleted.
] (Value -) button or [
] (Value +) button to
10.
Press the [Enter] button.
A confirmation message appears in the screen.
NOTE
fig.01-370d
When deleting performances
saved to USB memory, do
not remove the USB memory
until deleting is finished.
To return to the original screen without deleting the song, press the
[Function] (Exit) button.
11.
12.
Press the [Enter] button once more.
The song is deleted.
Press the [Function] (Exit) button so the indicator goes out.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Using the RG-3 with an External Display or Television
You can connect a computer monitor or other external display or a television
NOTE
to the RG-3, enabling you to display the Song Select screen, your favorite
images, song lyrics, and notations on a larger screen.
You can switch screens
with the remote control.
You cannot simultaneously use both an external display and a television with the
RG-3. Moreover, neither the external display nor the television will be able to display
properly if both are connected at the same time.
When using an external display, connect the display to the Ext Display connector,
but do not connect a television to the Video Out connector.
If using a television, connect the television to the Video Out connector, but do not
connect any external display to the Ext Display connector.
NOTE
Connecting an External Display
Displays That Can Be Connected to This Instrument
Confirm that your display
is compatible with the
frequencies listed to the left.
In general, a great many of the VGA monitors and multiscan monitors that
Using a display that is not
are available on the market are compatible with this instrument.
compatible with the left
However, before you connect any monitor, make sure it meets the following
specifications:
frequencies may result in
incorrect image output
when images move, and in
certain cases may even
damage the display.
Resolution
640 x 480 pixels
31.5 kHz
Horizontal scan frequency
Vertical scan frequency
Connector
60 Hz
3-row, 15-pin D-Sub type
Analog
Signal
■ Making the Connections
NOTE
You cannot display
* To prevent malfunction and/or damage to speakers or other devices, always turn
down the volume, and turn off the power on all devices before making any
information or images with
an external display when a
television is connected to the
Video Out jack.
connections.
fig.02-010
D-sub 15 pin
(Mini)
D-sub 15 pin
(Mini)
To use an external display,
first disconnect the television
from the Video Out jack, then
connect the external display.
Display Cable
RG-3’s Jack Panel
Ext Display Connector
External Display
1.
2.
Turn off the power to the RG-3 and the display to be connected.
Use display cable (commercially available) to connect the display
to the Ext Display connector on the RG-3.
For more on handling the
external display, refer to your
display’s owner’s manual.
3.
4.
Switch on the RG-3.
Switch on the connected display.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Using the RG-3 with an External Display or Television
Turning the Power Off
After use, turn off the power using the following procedure.
1.
Turn the volume all the way down on the RG-3.
2.
Turn off the RG-3.
3.
You can save this setting in
the RG-3’s memory using the
Memory Backup function
Turn off the connected display.
■ Changing the Display Settings
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the EXT DISPLAY screen.
] (Select +) button to
] (Select +) button so that
] (Value +) button to
fig.02-020d
3.
Press the [Song] (Select -) button or [
the display setting is flashing.
fig.02-030d
4.
5.
Press the [
select “VGA.”
] (Value -) button or [
Press the [Function] (Exit) button so the indicator goes out.
Images are now displayed in the screen of the connected external display.
When you press the [DISPLAY] button on the remote control, the content
being displayed switches to the external display.
To change the settings
indicated in the display,
Song Select screen → Lyrics screen → Slide show → Notation → Song Select
screen...
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Using the RG-3 with an External Display or Television
Connecting a Television
NOTE
You cannot display
fig.02-040
information or images with
a television when an
external display is connected
to the Ext Display connector.
To use an television, first
disconnect the external
display from the Ext Display
connector, then connect the
television.
Video Cable
RG-3’s Jack Panel
Video Out jack
Television
■ Making the Connections
* To prevent malfunction and/or damage to speakers or other devices, always turn
down the volume, and turn off the power on all devices before making any
connections.
1.
2.
Turn off the power to the RG-3 and the television to be connected.
Use a video cable (commercially available) to connect the RG-3’s
Video Out jack with the television’s video input jack.
3.
4.
Turn on the power to the RG-3.
Turn on the power to the television.
You can save this setting in
the RG-3’s memory using the
Memory Backup function
■ Switching Television Formats
If you find that the image quality of the television is poor, try switching the
television format.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the EXT DISPLAY screen.
] (Select +) button to
] (Value +) button to
3.
Press the [
] (Value -) button or [
select the television format.
fig.02-050d
Value: PAL, NTSC
4.
Press the [Function] (Exit) button so the indicator goes out.
To change the settings
When you press the [DISPLAY] button on the remote control, the content
being displayed switches to the television.
indicated in the display,
Song Select screen → Lyrics screen → Slide show → Notation → Song Select
screen...
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Using the RG-3 with an External Display or Television
Selecting What is To Be Displayed on the
External Display or Television
Here’s how you can specify what it is that you want to have displayed on
the external display or television connected to the RG-3.
1.
Press the remote control’s [DISPLAY] button to switch the content
displayed in the external display or television.
Screen Displayed
Description
Displays the Song Select screen.
Selecting songs is made easier when the Song Select
screen is displayed on an external display or television
set.
Song Select
Displays the Lyrics screen.
However, lyrics are displayed only during playback of
music files that includes lyrics data.
Lyrics
You can also connect USB memory to the Ext Memory
port and display “karaoke background images” saved
You can connect USB memory to the Ext Memory port
and display user images saved to the USB memory as
slide shows.
Slide Show
Notation
Displays the notation.
This allows you to check the music as the song is played
back.
2.
Press the [Function] (Exit) button so the indicator goes out.
Notes When Switching the Display on External Displays and
Televisions
• Notations are not displayed with audio CDs and audio files.
• If no user image is stored in the USB memory connected to the Ext
Memory port, you cannot exhibit slide shows on an external display or
television screen.
• You cannot display any lyrics screen when playing back music files that
does not include lyrics data.
• The internal songs include a number of jazz pieces that are played in an
improvised fashion, and you may find notes not conforming to measure
lines, odd divisions of the parts played in the left and right hand, and
other such features that do not match what is shown in the notation.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Using the RG-3 with an External Display or Television
Displaying Favorite Images on an External
What is VIMA?
Display or Television (Slide Show)
Presented by Roland, VIMA
represents an entirely new
concept in keyboards.
With the RG-3, you can display desired image data (slide shows) saved to
USB memory on a connected external display or television screen.
It lets you connect LCD
televisions, video cameras,
portable audio players, and
other devices, enabling you
to enjoy music and video
whether or not you have
experience in performing
music.
You can also use VIMA CD-ROMs (VIMA TUNES) sold by Roland.
This allows you to display slide shows contained on CD-ROMs on a display
or television at the same time that songs are played back.
■ When Using a USB Memory
Preparing the Images to be Displayed
Prepare the desired image data on your computer and save the data to the
USB memory.
You can have images be
displayed in the order you
prefer by changing the file
names. By adding a number
from 001 through 999 to the
six- to eight-character file
name, you can have the files
be displayed according to
their numerical order.
1.
Prepare the desired image data with your computer.
Image Data That Can Be Displayed
Size
640 x 480 pixels
Format
Extension
BMP format, JPEG format
“.bmp”, “.jpg”
NOTE
2.
3.
Connect the USB memory to your computer, then create a folder
named “_PICTURE” in the USB memory.
•The folder named
“_PICTURE” is not shown
in the Song Select screen.
Place the images you want to display in the “_PICTURE” folder.
•Some images may not be
displayed in the slide show
if 500 or more files,
including images, are
contained in a single folder.
Setting the Duration for Displaying Images
When you have data for multiple images saved to the USB memory and
want to display these images on a connected display or television set, you
can specify the length of time each image appears.
You can save this setting in
the RG-3’s memory using the
Memory Backup function
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the EXT DISPLAY screen.
] (Select +) button to
3.
Press the [Song] (Select -) button or [
the value for “Slide Interval” to flash.
] (Select +) button to get
fig.02-060d
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Using the RG-3 with an External Display or Television
4.
Press the [
] (Value -) button or [
] (Value +) button to set
the time a single image is to be displayed.
Value: 2–60
5.
Press the [Function] (Exit) button so the indicator goes out.
Running Slide Shows Through a Connected External Display
or Television
1.
Make sure the power to the RG-3 is turned off, then connect the
2.
Turn on the power to the RG-3 and the external display (or
television).
3.
4.
Connect the USB memory containing the saved images you want
to display to the Ext Memory port.
5.
Pressing the remote control’s [DISPLAY] button, make the
settings for the slide show to appear in the external display or
television.
6.
Press the [
] (Value -) button to play back the song.
The slide show appears in the external display or television screen.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Using the RG-3 with an External Display or Television
■ When Using a VIMA CD-ROM (VIMA TUNES)
1.
2.
Place the VIMA CD-ROM (VIMA TUNES) in the CD drive.
Press the [Song] button one or more times to select “CD” as the
song genre.
If using the remote control, press the remote control’s [EXTERNAL] button
and select “CD” for the song genre.
3.
4.
Press the [
select the song you want to play back.
] (Value -) button or [
] (Value +) button to
Pressing the remote control’s [DISPLAY] button, make the
settings for the slide show to appear in the external display or
television.
5.
Press the [
] (Value -) button to play back the song.
The slide show with images suitable for the song is shown on the connected
external display or television screen.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Using the RG-3 with an External Display or Television
Changing the Background for the Lyrics Screen
NOTE
You cannot display any
lyrics screen when playing
back music files that does
not include lyrics data.
You can have the background you prefer shown when displaying lyrics on
an external display or television screen.
Preparing the Images to be Displayed
Prepare the desired image data on your computer and save the data to the
USB memory.
1.
Prepare the desired image data with your computer.
Image Data That Can Be Displayed
Size
640 x 480 pixels
Color
8 bit (256 colors), 4 bit (16 colors), 1 bit (2 colors)
Format BMP Format
Name KARAOKE.BMP
* The RG-3 cannot deal with compressed image data.
2.
3.
4.
5.
6.
7.
Connect the USB memory to your computer, then create a folder
named “_PICTURE” in the USB memory.
Copy the image data you have created (KARAOKE.BMP) to the
“_PICTURE” folder.
Make sure the power to the RG-3 is turned off, then connect the
Turn on the power to the RG-3 and the external display (or
television).
Connect the USB memory containing the saved image you want to
display (KARAOKE.BMP) to the Ext Memory port.
Pressing the remote control’s [DISPLAY] button, set the external
display or television to display the lyrics.
The desired background image is shown in the external display or television
screen.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Performing with a Variety of Sounds
The factory settings have
tone demos registered in
The RG-3 contains 20 different internal tones. The tones are organized into
five tone groups, which are assigned to the Tone buttons.
fig.03-010
You can check and confirm
the internal tones.
You can delete tone demos
in the “Favorites” and
overwrite them by saving
other songs in their place.
If you want to play back
tone demos after they have
been deleted, initialize the
User Memory to restore the
Selecting a Tone Group
1.
Press any Tone button.
The indicator of the button you pressed will light.
Songs on VIMA CD-ROMs
(VIMA TUNES) are
programmed with
“recommended tones”
suitable for each song.
When you play the keyboard, you will hear a sound in the selected tone
group.
Selecting Variation Tones
When you select a song, the
recommended tones are
assigned to the RG-3’s Tone
buttons, and those Tone
buttons then flash.
2.
While holding down the Tone button and the [
] (Value +) button to select the tone.
] (Value -) or
[
When you press a flashing
Tone button, the
The tone name appears in the display.
fig.03-020d
recommended tone is
selected, enabling you to
perform the selected song
using a tone matched to that
song as it plays back.
The tone you’ve selected is heard when you finger the keyboard.
Piano 1
Piano 2
Harpsichord
1 Harpsichord
1 Superior Grand
2 Superior Grand + Str
1 Natural Grand
2 Natural Grand + Str
2 Coupled Harpsichord
3 Harpsichord + Choir
4 Harpsichord + Str
3 Superior Grand + Pad 3 Natural Grand + Pad
You can also switch the
off by holding down a tone
button and pressing the
[Song] button.
4 Piano + FM E.Piano
4 Piano + Bell
Vibraphone
1 Vibraphone
2 Bell
E.Piano
1 Electric Piano
2 FM E.Piano
The Tone screen appears as
shown below when the
Split function is on.
3 Harp
3 ’60s Electric Piano
4 Electric Piano + Str
4 Electric Piano + Pad
Some tones are assigned a pair of tones, which allow you to perform with
two tones layered together.
Pressing a tone button
once more cancels the Split
function.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
■ Changing the Volume Balance of the Layered
Tones (Layer Balance)
Some tones enable you to perform with two tones layered together. These
are called “Layer tones.”
When you select a Layer tone, you can also change the balance in the volume
of the two Layer tones.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the BALANCE screen.
] (Select +) button to
] (Select +) button to get
] (Value +) button to
fig.03-030d
3.
4.
Press the [Song] (Select -) button or [
the value for “Layer” to flash.
fig.03-040d
Press the [
] (Value -) button or [
adjust the volume balance.
Value
description
The volume increases as the value is raised.
The numeral on the left indicates the tone’s original volume lev-
el, and the number on the right indicates the volume of the tone
as played with the other Layer tone.
1: 9–9: 1
Example:
When Natural Grand+Str (Natural Grand Piano + Strings) are selected as the tones
fig.03-050d
Volume level of Strings
Volume level of Natural Grand (Natural Grand piano)
5.
Press the [Function] (Exit) button so the indicator goes out.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Making Fine Adjustments to the Piano Sound
You can make fine adjustments to the sound of the piano as desired.
You can save this setting in
the RG-3’s memory using the
Memory Backup function
■ Adjusting the Keyboard Touch (Key Touch)
You can adjust the touch (playing feel) of the keyboard.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the KEY TOUCH screen.
] (Select +) button to
] (Select +) button to get
] (Value +) button to
fig.03-060d
3.
4.
Press the [Song] (Select -) button or [
the value for “Touch” to flash.
fig.03-070d
Press the [
] (Value -) button or [
change the value.
Value
1–100
Description
The keyboard touch gets lighter as the value decreases, with the
touch becoming heavier as the value is increased.
The sound plays at a fixed volume, regardless of how forcefully
the keys are played.
Fix
5.
Press the [Function] (Exit) button so the indicator goes out.
Fortissimo (ff) can be played with a lighter touch as the value is decreased, making
it feel like the keyboard has a lighter touch. This setting makes it easy to play, even
for children.
Increasing the value gives the instrument a heavier key touch. Fortissimo (ff) cannot
be produced unless you play more strongly than usual, making the keyboard feel
heavier. Dynamic fingering adds even more feeling to what you play.
A value of around 65 provides a standard setting, producing the most natural touch.
This is the closest to the touch of an acoustic piano.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
■
Changing the Timing of Sounds According to the
Force Used to Press the Keys (Hammer Response)
You can save this setting in
the RG-3’s memory using the
Memory Backup function
This adjusts how your playing strength will affect the timing at which the
note sounds. This is called the “Hammer Response” function.
On an acoustic piano, pressing a key moves a hammer, which strikes a string
to produce sound. If you press the key softly, the hammer will move slowly,
meaning that it will take slightly longer (in comparison to a strongly-played
note) from the moment you press the key until the sound is produced.
If the Hammer Response function is turned on, the time between the
moment you press a key until the sound is heard will change depending on
the strength with which you play. As you play more softly, this time will
become longer.
1.
2.
Press the [Function] (Exit) button, getting its indicator to light.
Press the [Song] (Select -) button or [
display the KEY TOUCH screen.
] (Select +) button to
fig.03-060d
3.
4.
Press the [Song] (Select -) button or [
the value for “Hammer” to flash.
] (Select +) button to get
fig.03-090d
Press the [
] (Value -) or [
] (Value +) button to change the
value.
Value
Description
Light
The response is faster when the keys are pressed gently.
The regular timing is used when the keys are pressed gently.
Medium
The timing of the sounds is delayed when the keys are pressed
gently.
Heavy
The Hammer Response function is cancelled.
Off
The sound is played immediately, regardless of the force with
which the keys are played (velocity).
5.
Press the [Function] (Exit) button so the indicator goes out.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
■ Playing Sounds When the Keys Are Released
(Key Off Resonance)
You can save this setting in
the RG-3’s memory using the
Memory Backup function
You can play the “key off” sound (the subtle sound produced when the keys
are released) obtained when playing an acoustic piano.
1.
Press the [Function] (Exit) button, getting its indicator to light.
NOTE
2.
This setting is enabled only
with the piano tones
Press the [Song] (Select -) button or [
display the RESONANCE screen.
] (Select +) button to
fig.03-100d
(Superior Grand, Natural
Grand) and harpsichord
tones (Harpsichord, Coupled
Harpsichord).
You cannot set this for other
tones.
3.
4.
Press the [Song] (Select -) button or [
the value for “KeyOff” to flash.
] (Select +) button to get
fig.03-110d
Press the [
] (Value -) or [
] (Value +) button to change the
value.
Value
Description
The volume of the Key Off sound decreases as the value is low-
ered, while raising the value increases the volume of the Key
Off sound.
0–9
The Key Off Resonance function is not active when the value is
set to “0.”
5.
Press the [Function] (Exit) button so the indicator goes out.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
■ Producing the Resonance of the Strings When
the Keys Are Played (String Resonance)
You can save this setting in
the RG-3’s memory using the
Memory Backup function
When you play the keys on an acoustic piano, the strings that are already
playing resonate as well. The function that reproduces this effect is called
“String Resonance.”
1.
Press the [Function] (Exit) button, getting its indicator to light.
NOTE
2.
Press the [Song] (Select -) button or [
display the RESONANCE screen.
] (Select +) button to
This setting is enabled only
with the piano tones.
fig.03-100d
You cannot set this for
other tones.
3.
4.
Press the [Song] (Select -) button or [
the value for “String” to flash.
] (Select +) button to get
fig.03-130d
Press the [
] (Value -) or [
] (Value +) button to change the
value.
Value
Description
The resonance level decreases as the value is decreased, while
increasing the value increases the amount of resonance.
The String Resonance function is not active when the value is
set to “0.”
0–9
5.
Press the [Function] (Exit) button so the indicator goes out.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
■
Producing the Resonance of the Strings When the
Keys Are Played (Damper Resonance)
You can save this setting in
the RG-3’s memory using the
Memory Backup function
You can change the volume of the damper pedal resonance.
On an acoustic piano, depressing the damper pedal makes the notes you
play resonate with other strings, adding rich reverberations and fatness to
the sound. The damper pedal on the RG-3 recreates this resonance (Damper
Resonance) when depressed.
NOTE
This setting is enabled only
with the piano tones.
1.
2.
Press the [Function] (Exit) button, getting its indicator to light.
You cannot set this for
other tones.
Press the [Song] (Select -) button or [
display the RESONANCE screen.
] (Select +) button to
fig.03-100d
3.
4.
Press the [Song] (Select -) button or [
the value for “Damper” to flash.
] (Select +) button to get
fig.03-150d
Press the [
] (Value -) or [
] (Value +) button to change the
value.
Value
Description
The resonance volume decreases as the value is lowered, while
raising the value increases the volume of the Damper Reso-
nance.
0–9
The Damper Resonance function is not active when the value is
set to “0.”
5.
Press the [Function] (Exit) button so the indicator goes out.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
■ Adjusting the Sound to Achieve the Preferred
Tone Quality (Equalizer)
You can save this setting in
the RG-3’s memory using the
Memory Backup function
The RG-3 features a built-in, three-band digital equalizer.
An equalizer boosts or cuts specific sound pitches (frequency ranges) to
adjust the sound balance for the overall performance.
For example, you can boost the highs to get a crisper sound, or boost the low
end for a more powerful sound.
You can also adjust the sound to compensate for the acoustical
characteristics of the performance space.
If raising the values for separate frequencies causes the sound to distort, you
can use the “Master Level” (see below) to control such distortion.
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
display the EQUALIZER screen.
] (Select +) button to
fig.03-151d
3.
Press the [Song] (Select -) button or [
] (Select +) button so that
the value for the range you want to set is flashing.
fig.03-152d
Value
Description
You can temper the distortion in the sound by lowering the level.
Raising the level too much may cause the sound to become dis-
torted.
Master
(Master Level)
Low-frequency range.
L (Low)
This is the range of frequencies for instruments like drums, bass,
organ, guitar and strings.
Midrange.
M (Middle)
H (High)
This is the range of frequencies where most instrument sounds
are concentrated.
High-frequency range.
These frequencies add brilliance to the sound.
4.
5.
Press the [
adjust the range and the overall level.
] (Value -) button or [
] (Value +) button to
Value: -60–0–+60
Press the [Function] (Exit) button so the indicator goes out.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Changing the Pitch of the Keyboard
Sound (Transpose)
By using the “Transpose function,” you can transpose your performance
without changing the notes you play.
For example, even if the song is in a difficult key with numerous sharps (
)
or flats ( ), you can transpose it to a key that is easier for you to play.
When accompanying a vocalist, you can easily transpose the pitch to a range
that is comfortable for the singer, while still playing the notes as written (i.e.,
with the same fingering positions).
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the TRANSPOSE screen.
] (Select +) button to
] (Select +) button to get
] (Value +) button to
fig.01-130d
3.
Press the [Song] (Select -) button or [
the value for “Link” to flash.
fig.01-140d
When Link is set to “Off,”
you can transpose the notes
from the keyboard and the
4.
5.
Press the [
] (Value -) button or [
switch the Link setting to “On.”
When set to “On,” the keyboard and song are transposed simultaneously.
Example:
Press the [Song] (Select -) button or [
] (Select +) button to get
Playing a song in E major
while playing the keys for
C major
the value for “Keyboard/Playback” to flash.
fig.03-160d
In this example, C is the root
note in the key of C major.
E, the root of E major, is the
third in C major.
It is up four keys, including
the black keys, so touch, then
enter “4” for the setting.
]
6.
7.
Press the [
select the transposition value.
] (Value -) button or [
] (Value +) button to
The keyboard is transposed by a semitone each time you press the [
(Value -) button or [ ] (Value +) button.
Pressing the [ ] (Value -) and [ ] (Value +) buttons simultaneously
If you play
It will sound
#
C E G
E G B
returns the setting to the original value (0).
Value: -6–0–+5 (semitone steps)
Press the [Function] (Exit) button so the indicator goes out.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Separately Transposing the Keyboard Sounds and the Song
Being Played Back
You can transpose the keyboard sounds separately from the song being
played back by setting Link to “Off.”
For more on the procedure
to transpose the song being
3.
Press the [Song] (Select -) button or [
the value for “Link” to flash.
] (Select +) button to get
] (Value +) button to
] (Select +) button to get
] (Value +) button to
fig.01-140d
4.
5.
6.
Press the [
] (Value -) button or [
switch the Link setting to “Off.”
fig.01-151d
Press the [Song] (Select -) button or [
the value for “Keyboard” to flash.
fig.03-191d
Press the [
] (Value -) button or [
select the transposition value.
Value: -6–0–+5 (semitone steps)
Cancelling the Transpose Function
1.
In the TRANSPOSE screen, press the [
(Value +) buttons simultaneously to select “0.”
] (Value -) and [
]
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Tuning to Other Instruments’ Pitches
(Master Tuning)
In situations such as when playing ensemble with other instruments, you
can tune the RG-3’s standard pitch to the pitch of another instrument.
You can save this setting in
the RG-3’s memory using the
Memory Backup function
The standard pitch generally refers to the pitch of the note that’s played
when you finger the middle A key.
This tuning of all the instruments to a standard pitch is called “tuning.”
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
display the TUNE screen.
] (Select +) button to
fig.03-200d
3.
4.
Press the [Song] (Select -) button or [
] (Select +) button to get
the value for the Master Tuning setting to flash.
fig.03-210d
Press the [
] (Value -) button or [
] (Value +) button to
change the standard pitch.
Value
415.3–440.0 – This is set to “440.0” when the power to the RG-3 is switched
466.2 (Hz) on.
Description
5.
Press the [Function] (Exit) button so the indicator goes out.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Setting the Tuning Curve (Stretched Tuning)
Pianos are generally tuned so that the low range is flatter and the high range
is sharper than equal tempered pitches. This method of tuning is unique to
the piano, and is known as “stretched tuning.”
You can save this setting in
the RG-3’s memory using the
Memory Backup function
A graph that shows the changes in pitch of actual tuning compared with the
changes in equal temperament pitch is called a tuning curve.
Changing the tuning curve produces subtle variations in the reverberations
of the chords you play.
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
display the TUNE screen.
] (Select +) button to
] (Select +) button to get
] (Value +) button to
fig.03-200d
3.
4.
Press the [Song] (Select -) button or [
the value for “Stretch” to flash.
fig.03-230d
Press the [
] (Value -) button or [
change the Stretch Tuning setting.
Value
1
Description
This is the standard tuning curve.
It is suitable when playing in an ensemble with other instru-
ments.
This tuning curve expands the bass and treble ends somewhat.
It is suitable for performances such as piano solos.
2
This is set to “2” when the power to the RG-3 is switched on.
5.
Press the [Function] (Exit) button so the indicator goes out.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Changing the Tuning
You can play classical styles such as Baroque using historic temperaments
(tuning methods).
You can save this setting in
the RG-3’s memory using the
Memory Backup function
Most modern songs are composed for and played in equal temperament, the
most common tuning in use today. But at one time, there were a wide
variety of other tuning systems in existence.
By playing in the temperament that was in use when a composition was
created, you can experience the sonorities of chords originally intended for
that song.
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
display the TUNE screen.
] (Select +) button to
] (Select +) button to get
] (Value +) button to
fig.03-200d
3.
4.
Press the [Song] (Select -) button or [
the Temperament setting to flash.
fig.03-250d
Press the [
] (Value -) button or [
select the temperament.
Display
Equal
Qualities
In this tuning, each octave is divided into twelve equal steps.
Every interval produces about the same amount of slight disso-
nance.
This tuning eliminates ambiguities in the fifths and thirds.
Just (Maj)
Just (min)
Kirnberger
It is unsuited to playing melodies and cannot be transposed,
but is capable of beautiful sonorities.
The Just tunings differ from major and minor keys.
You can get the same effect with the minor scale as with the ma-
jor scale.
This is an improvement of the Mean Tone and Just tunings that
provides a high degree of freedom of modulation.
Performances are possible in all keys (III).
This tuning, devised by the philosopher Pythagoras, eliminates
dissonance in fourths and fifths.
Dissonance is produced by third-interval chords, but melodies
are euphonious.
Pythagorean
Meantone
This scale makes some compromises in just intonation, en-
abling transposition to other keys.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Display
Qualities
This temperament combines the Mean Tone and Pythagorean
tunings.
Performances are possible in all keys (first technique, III).
This tuning is suitable for the music of Arabia.
Werkmeister
Arabic
When playing with tuning other than equal temperament, you need to
specify the tonic note for tuning the song to be performed (that is, the note
that corresponds to C for a major key or to A for a minor key).
5.
Press the [Function] (Exit) button so the indicator goes out.
■ Setting the Tonic
You can save this setting in
the RG-3’s memory using the
Memory Backup function
When playing with tuning other than equal temperament, you need to
specify the tonic note for tuning the song to be performed (that is, the note
that corresponds to C for a major key or to A for a minor key).
If you choose an equal temperament, there’s no need to select a tonic note.
1.
2.
Press the [Function] (Exit) button, getting its indicator to light.
Press the [Song] (Select -) button or [
display the TUNE screen.
] (Select +) button to
] (Select +) button to get
] (Value +) button to
fig.03-200d
NOTE
When performing in
ensemble with other
instruments, be aware that
depending on the key, there
may be some shifting of the
pitch.
3.
Press the [Song] (Select -) button or [
the value for “Key” to flash.
Tune the RG-3 to the
fundamental pitch of the
other instruments.
fig.03-270d
4.
5.
Press the [
] (Value -) button or [
select the tonic.
fig.03-280
Display
Letter name
Press the [Function] (Exit) button so the indicator goes out.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Playing Different Tones with the Left
and Right Hands (Split Performance)
Dividing the keyboard into right-hand and left-hand areas, then playing
different sounds in each is called “Split performance.”
You can change the split
The boundary key is called the “split point.”
The split point key is included in the left-hand keyboard area. Each time
power to the keyboard is turned on, the split point is reset to “F#3.”
fig.03-290
Split Point (Factory setting: F#3)
…
A0 B0 C1 D1 E1 F1 G1 A1 B1 C2
C3
C4
C5
B7 C8
Left-hand Tone
Right-hand Tone
1.
2.
3.
Press the [Function] (Exit) button, getting its indicator to light.
Press the [Song] (Select -) button or [
display the SPLIT screen.
] (Select +) button to
fig.03-300d
You can switch Split function
on and off by holding down
the tone button and pressing
the [Song] button.
4.
Press the [Song] (Select -) button or [
the value for “Split” to flash.
] (Select +) button to get
fig.03-310d
The Tone screen appears as
shown below when the Split
function is on.
5.
6.
Press the [
] (Value -) or [
] (Value +) button to select “On.”
Pressing a tone button once
more cancels the Split
function.
The keyboard is divided into right-hand and left-hand areas.
The tone played prior to Split Performance is selected for the right hand, and
a suitable tone to match that tone is selected for the left hand automatically.
For more about the tones
with which this setting is
To exit Split mode, press the [
(Value +) button to set the “Split” setting to “Off.”
] (Value -) button or [
]
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
■ Changing the Keyboard’s Split Point
You can change the location where the keyboard is divided (the split point).
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
display the SPLIT screen.
] (Select +) button to
fig.03-301d
3.
Press the [Song] (Select -) button or [
the value for “Split Point” to flash.
] (Select +) button to get
fig.03-330d
4.
5.
Press the [
split point.
] (Value -) or [
] (Value +) button to select the
Value: B1–B6
This is set to “F#3” when the power to the RG-3 is switched on.
Press the [Function] (Exit) button so the indicator goes out.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Adding Reverberation to the Sound (Reverb)
Apply a reverb effect to the notes you play with the RG-3.
You can save this setting in
the RG-3’s memory using the
Memory Backup function
Reverb makes it sound as if you are playing in a concert hall.
1.
2.
Press the [Function] (Exit) button so the indicator is lit.
Press the [Song] (Select -) button or [
display the EFFECT screen.
] (Select +) button to
fig.03-340d
3.
Press the [Song] (Select -) button or [
the value for “Reverb” to flash.
] (Select +) button to get
fig.03-350d
4.
5.
Press the [
change the amount of reverb applied.
] (Value -) button or [
] (Value +) button to
Value
0–127
Description
Increasing the value results in a deeper reverb effect.
No reverb is applied when the value is set to “0.”
Press the [Function] (Exit) button so the indicator goes out.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Assigning Functions to Pedals
You can assign a variety of functions to the left and center pedals.
You can call up the assigned functions just by pressing the corresponding
pedal.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the PEDAL screen.
] (Select +) button to
fig.03-360d
3.
4.
Press the [Song] (Select -) button or [
] (Select +) button to get
the value for “Cent” (Center Pedal) or “Left” (Left Pedal) to flash.
fig.03-370d
Press the [
] (Value -) button or [
] (Value +) button to
select the function assigned to the pedal.
Value
Description
Sostenuto
Soft
area.
LwrDamper
(Lower Damper)
Play/Stop
Starts and stops playback of the song.
played whenever the pedal is not being pressed as you per-
form.
When you perform while pressing the pedal, an layer tone is
played together with the original tone.
NOTE
No effects will be applied
with “Pedal EX” function
assigned to the pedal if any
tone other than the layer
tone is selected.
The volume of the layer tone is adjusted according to how
much you press the pedal.
Example:
Pedal EX
When “Harpsichord + Choir” are selected
• Playing the keyboard without pressing the pedal Only the
harpsichord tone is played.
• Playing the keyboard while pressing the pedal
When the pedal is not pressed, only the harpsichord tone is
played, while the choir tone gradually comes in as the
pedal is pressed. The volume of the choir tone is adjusted
according to how much you press the pedal.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Value
Description
When you play a key while pressing on the pedal, the note for
the key being pressed and the note one octave above it are lay-
ered and played together.
Octave
You can adjust the volume of the sound one octave above the
layer tone by changing the pressure used on the pedal.
5.
Press the [Function] (Exit) button so the indicator goes out.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Changing the Volume Balance of the
Accompaniment and the Keyboard
You can also change the balance in the volume of songs or accompaniment
and the volume of the keyboard as you play.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the BALANCE screen.
] (Select +) button to
fig.03-030d
3.
4.
Press the [Song] (Select -) button or [
] (Select +) button to get
the value for “Key:Acmp” (Keyboard:Accompaniment) to flash.
fig.03-390d
Press the [
] (Value -) button or [
] (Value +) button to
adjust the keyboard and the accompaniment volume balance.
Value
Description
The volume increases as the value is raised.
1: 9–9: 1
The numeral on the left indicates the keyboard volume, and the
number on the right indicates the accompaniment volume.
5.
Press the [Function] (Exit) button so the indicator goes out.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Remembering the Settings Even When the
Power is Turned Off (Memory Backup)
Normally, the various settings revert to their default values when the power
is turned off.
For more on the settings
stored using Memory
However, you can specify that the settings will be remembered even when
the power is turned off. This function is called “Memory Backup.”
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the MEMORY BACKUP screen.
] (Select +) button to
fig.03-400d
3.
4.
Press the [Enter] button.
NOTE
A confirmation message appears in the screen.
fig.03-410d
Never turn off the power
while “Executing...” is
displayed in the screen.
Doing so may corrupt the
RG-3’s memory and render
it unusable.
Pressing the [Function] (Exit) button at this point returns you to the original
screen without the settings being saved.
Press the [Enter] button once more.
Memory Backup is executed.
When Memory Backup is finished, the display and buttons return to their
normal appearance.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Performance
Restoring the Factory Settings (Factory Reset)
NOTE
When you perform a
Factory Reset, all settings
that have been stored in
memory up to then are
erased and reset to their
factory defaults.
You can return the content stored with “Memory Backup” (refer to the
previous page) to their original factory settings.
This operation is referred to as “Factory Reset.”
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the FACTORY RESET screen.
] (Select +) button to
When you want to restore
the content registered to
the RG-3’s User memory to
the factory condition, refer
fig.03-420d
3.
4.
Press the [Enter] button.
A confirmation message appears in the screen.
fig.03-430d
Pressing the [Function] (Exit) button at this point returns you to the original
screen without Factory Reset being executed.
Press the [Enter] button once more.
Factory reset is executed.
NOTE
When the factory reset is complete and the screen shown below appears,
switch the power off, then back on.
Never turn off the power
while “Executing...” is
displayed in the screen.
Doing so may corrupt the
RG-3’s memory and render it
unusable.
fig.03-431d
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Recording the Performance
■ Notes Regarding Recording
NOTE
first saved to the “Favorites,” recorded performances are erased when the
RG-3’s power is turned off.
Use USB memory available
from Roland.
Proper operation cannot be
guaranteed if other external
memory products are used.
If you want to retain such performances, be sure to save them to the
“Favorites.”
Recording Performances
1.
2.
Press the [Function] (Exit) button, getting its indicator to light.
3.
Press the [Song] (Select -) button or [
display the RECORD screen.
] (Select +) button to
fig.04-010d
4.
Press the [Enter] button.
The following screen appears, and the RG-3 goes into recording standby.
fig.04-020d
Start Recording
5.
Play the keyboard to begin recording.
Recording starts, and the following screen appears.
The text “Recording...” flashes while recording is in progress.
fig.04-030d
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Recording the Performance
Stopping Recording
6.
Press the [Enter] button.
Recording stops.
The following screen appears.
fig.04-040d
You can save recordings or
your performances to the
■ Play Back the Recorded Performance
1.
Press the [
] button.
You will hear the recorded performance.
Once again press the [
] button, and playback will stop.
If you see the following...
If you attempt to select a song when another performance has already been recorded,
the following appears in the display.
fig.04-050d
If it is OK to erase the performance, press the [Enter] (Enter) button.
If you do not want to erase the performance, press the [Function] (Exit) button.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Recording the Performance
Saving Recorded Performances
You can copy performances
saved in the “Favorites” to
USB memory and floppy
disks.
You can save recorded performances to the RG-3’s “Favorites” and to USB
memory and floppy disks.
If not first saved to the “Favorites,” USB memory, or floppy disks, recorded
performances are erased when the RG-3’s power is turned off.
You can also copy
performances saved on USB
memory and floppy disks to
If you want to retain such performances, be sure to save them to the
“Favorites” or to a USB memory or floppy disk.
1.
2.
Press the [Function] (Exit) button, getting its indicator to light.
Press the [Song] (Select -) button or [
display the FILE screen.
] (Select +) button to
fig.01-230d
NOTE
Use USB memory available
from Roland.
3.
Proper operation cannot be
guaranteed if other external
memory products are used.
Press the [Song] (Select -) button or [
“SAVE” is flashing.
] (Select +) button so
fig.04-070d
4.
5.
Press the [Enter] button.
Press the [Song] (Select -) button or [
] (Select +) button to get
the value for “Dest” (Save Destination) to flash.
fig.04-080d
6.
Press the [
] (Value -) button or [
] (Value +) button to
change the “Dest” (Save Destination) setting.
Display
Description
Favorites
Floppy Disk
Ext Memory
The performance data is saved to the “Favorites.”
The performance data is saved to the Floppy disk.
The performance data is saved to the USB memory.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Recording the Performance
7.
Press the [Song] (Select -) button or [
] (Select +) button to get
“save-destination number” to flash.
fig.04-090d
NOTE
8.
When saving performances to
the USB memory, do not
remove the USB memory
from the Ext Memory port
until the save is completed.
Press the [
select the “save-destination number.”
] (Value -) button or [
] (Value +) button to
When a performance has already been saved to a number, the name of the
performance is indicated.
When a number has no performance assigned to it, this is indicated in the
display in the following form: “4: (Empty).”
9.
Press the [Enter] button.
The performance is saved.
10.
Press the [Function] (Exit) button so the indicator goes out.
When a number has no song assigned to it, this is indicated in the display in the
following form: “4: (Empty).”
fig.04-100d
The following appears in the screen if you attempt to save a song to a number to
which a song has already been saved.
fig.04-110d
To delete the saved song and replace it by saving the current song, press the [Enter]
button.
If you do not want to delete the saved song, press the [Function] (Exit) button to
cancel saving.
■ Deleting Performances Saved to the “Favorites”
or USB Memory
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
You can register the currently selected tone buttons, transposition and
volume balance, and a variety of other settings as “favorite performance
settings” (User Program).
For more on what can be
registered to a User Program,
This allows you to call up the registered favorite performance settings
whenever you need them.
Registering the settings you often use is makes it even more convenient for
you.
fig.05-010
Panel Settings
1 User Program
Write
Temporary Memory
RG-3 User Memory
1
7
2
8
3
4
5
6
1
2
3
4
5
6
Save
Load
9 10 11 12
7
8 9 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30
31 32 33 34 35 36
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30
31 32 33 34 35 36
.....
36 User Programs
(1 User Program Set)
Max. 99 User Program Sets
USB Memory
1
2
3
4
5
6
Save
Load
7
8 9 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30
31 32 33 34 35 36
6
.....
Max. 99 User Program Sets
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
Saving Performance Settings (User Program)
You can register up to 36 User Programs to the RG-3.
1.
Set the Tone, and other data until the settings are the way you
want them.
2.
Press the [Function] (Exit) button, getting its indicator to light.
3.
Press the [Song] (Select -) button or [
display the USER PROGRAM screen.
] (Select +) button to
fig.05-020d
4.
5.
6.
Press the [Song] (Select -) button or [
“WRITE” is flashing.
] (Select +) button so
fig.05-030d
Press the [Enter] button.
The following screen appears.
fig.05-040d
Press the [
] (Value -) button or [
] (Value +) button to
select the write-destination number.
Select a number from UPG 01 to UPG 36 as the performance settings write
destination.
fig.05-050d
7.
8.
Press the [Enter] button.
A confirmation message appears in the screen.
fig.05-060d
Press the [Enter] button.
The currently selected performance settings are registered, and the USER
PROGRAM screen returns to the display.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
Calling Up Saved User Programs
You can use the Pedal as a
dedicated switch for
selecting User Programs in
order.
You can easily call up User Programs.
1.
2.
For more details, refer to
Press the [Function] (Exit) button so the indicator goes out.
Hold down the [Function] (Exit) button and press the [
]
(Value -) button or [
] (Value +) button to select the User
Program you want to call up.
fig.05-070d
The display changes to indicate the registered buttons and other
performance settings. The tone name registered in the User Program
appears in the lower row of the screen.
Restoring the Standard Performance Settings
(Settings in Effect When the Power is Turned On)
After you have called up User Programs, you can use the following
procedure to restore the performance settings that are selected when the
power is turned on.
1.
Press the [Function] (Exit) button so the indicator goes out.
2.
Hold down the [Function] (Exit) button and press the [
(Value -) button to select “User Program 01.”
]
fig.05-070d
3.
While holding down the [Function] (Exit) button and the [
(Value -) button once again.
]
The following screen appears.
fig.05-090d
The favorite performance settings are cancelled, restoring the settings to
their status when the power is turned on.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
Saving the User Program Sets
You can restore the content
in the User Memory to the
original default factory
settings.
The 36 separate configurations of User Programs registered in the RG-3 can
* When saving the settings to USB memory, connect the USB memory to the Ext
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
NOTE
Press the [Song] (Select -) button or [
display the USER PROGRAM screen.
] (Select +) button to
Use USB memory available
from Roland.
fig.05-020d
Proper operation cannot be
guaranteed if other external
memory products are used.
3.
4.
5.
6.
Press the [Song] (Select -) button or [
“SAVE” is flashing.
] (Select +) button so
fig.05-110d
Press the [Enter] button.
The following screen appears.
fig.05-120d
Press the [Song] (Select -) button or [
] (Select +) button so that
the “User Program save destination” is flashing.
fig.05-130d
Press the [
] (Value -) button or [
] (Value +) button to
select the “User Program save destination.”
Display
Description
User Memory The User Program is saved in User Memory.
Ext Memory
The User Program is saved in USB memory.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
7.
8.
Press the [Song] (Select -) button or [
] (Select +) button so that
the “User Program save-destination number” is flashing.
fig.05-140d
NOTE
Be sure not to turn off the
power as long as
“Executing...” is displayed.
Turning off the power at this
time may corrupt the USB
memory and/or User
Memory and render them
unusable.
Press the [
] (Value -) button or [
] (Value +) button to
select the “User Program save-destination number.”
Value: UPG Set 01–UPG Set 99
To return to the original screen without saving the User Program, press the
[Function] (Exit) button.
9.
Press the [Enter] button.
The User Program is saved to the User memory or USB memory.
10.
Press the [Function] (Exit) button so the indicator goes out.
When there is no User Program assigned to a number, this is indicated in the display
in the following form: “2: (Empty).”
fig.05-150d
The following appears in the screen if you attempt to save a User Program to a
number to which a User Program has already been saved.
fig.05-160d
If you save performance settings to a number that already has User Programs saved
to it, the previously saved User Programs are then deleted.
To delete the saved set of User Programs and save the new performance settings to
that number, press the [Enter] button.
When deleting the set of
saved User Programs, refer
If you do not want to delete the saved User Programs, press the [Function] (Exit)
button to cancel the save.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
Loading Saved User Program Sets
NOTE
Note that when User
Program sets are loaded, all
of the performance settings
stored in the RG-3 are
deleted.
memory individually to the RG-3.
* When loading User Programs from USB memory, connect the USB memory to the
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
display the USER PROGRAM screen.
] (Select +) button to
fig.05-020d
3.
4.
5.
6.
Press the [Song] (Select -) button or [
“LOAD” is flashing.
] (Select +) button so
fig.05-180d
Press the [Enter] button.
The following screen appears.
fig.05-190d
Press the [Song] (Select -) button or [
] (Select +) button so that
the “User Program Set to be loaded” is flashing.
fig.05-200d
Press the [
] (Value -) button or [
] (Value +) button to
select the “User Program set to be loaded.”
Display
Description
User Memory Loads User Programs saved in the User Memory.
Ext Memory
Loads User Programs saved in USB memory.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
7.
8.
Press the [Enter] button.
Press the [Song] (Select -) button or [
] (Select +) button so that
the “load User Program Set number” is flashing.
fig.05-210d
9.
Press the [
] (Value -) button or [
] (Value +) button to
select the number for the User Program Set to be loaded.
NOTE
10.
Press the [Enter] button.
When calling up User
A confirmation message appears in the screen.
Programs saved in USB
memory, do not remove the
USB memory from the Ext
Memory port until the
fig.05-220d
settings have been called up.
To return to the original screen without loading the User Program, press the
[Function] (Exit) button.
11.
Press the [Enter] button once more.
The selected User Program Set is loaded to the RG-3.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
Deleting Saved User Program Sets
You can delete individual User Program sets saved to USB memory or in
* When deleting User Programs from USB memory, connect the USB memory to the
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
display the USER PROGRAM screen.
] (Select +) button to
fig.05-020d
3.
4.
5.
Press the [Song] (Select -) button or [
the “DEL” (Delete) is flashing.
] (Select +) button so that
fig.05-240d
Press the [Enter] button.
The following screen appears.
fig.05-250d
Press the [Song] (Select -) button or [
] (Select +) button so that
the “save-destination of the User Program Set to be deleted” is
flashing.
fig.05-260d
6.
Press the [
] (Value -) button or [
] (Value +) button to
select “save-destination of the User Program Set to be deleted.”
Display
Description
User Memory Deletes the User Programs saved in the User Memory.
Ext Memory
Deletes the User Programs saved in USB memory.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
7.
Press the [Song] (Select -) button or [
] (Select +) button to get
“the number of the User Program Set to be deleted.” to flash.
fig.05-270d
8.
9.
Press the [
] (Value -) button or [
] (Value +) button to
select the “the number of the User Program Set to be deleted.”
Press the [Enter] button.
A confirmation message appears in the screen.
NOTE
fig.05-280d
When deleting User
Programs saved in USB
memory, do not remove the
USB memory from the Ext
Memory port until the delete
is completed.
To return to the original screen without deleting the User Program, press the
[Function] (Exit) button.
10.
11.
Press the [Enter] button once more.
The selected User Program Set is deleted.
Press the [Function] (Exit) button so the indicator goes out.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. User Program Registration
Using the Pedal to Switch User Programs
You can use the Pedal as a dedicated switch for selecting User Programs in
order.
The User Programs are switched each time the pedal is pressed.
Each press of the pedal takes you to the next higher numbered User
Program until you reach number 36, whereby pressing the pedal again
cycles you back to number 1. (In other words, this sequence: 1, 2, 3, ... 36, 1...)
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
display the USER PROGRAM screen.
] (Select +) button to
] (Select +) button so that
] (Value +) button to
fig.05-020d
3.
4.
Press the [Song] (Select -) button or [
the “Pedal Shift” is flashing.
fig.05-300d
Press the [
] (Value -) button or [
select the pedal to be used for switching the User Programs.
Value
Left
Description
The left pedal is dedicated to switching User Programs.
The function assigned to the left pedal cannot be used.
The center pedal is dedicated to switching User Programs.
The function assigned to the center pedal cannot be used.
Center
Off
You can use a function assigned to the pedal.
You cannot use the Pedal as a dedicated switch for selecting
User Programs in order.
5.
Press the [Function] (Exit) button so the indicator goes out.
The User Programs are switched each time you press the pedal to which the
function of switching performance settings is assigned.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
Preventing Changes to the
Current Settings (Panel Lock)
When “Panel Lock“ is activated, all buttons will no longer
function.
Making Detailed Settings
You can set the master tuning, temperament, and other
settings that make the RG-3 easier to play.
The screen in which the settings are changed is called the
“Function screen.”
Thus, even if you press a button by mistake, the settings
remain unchanged.
How to Enter Function Mode
Making the Setting
1. Press the [Function] (Exit) button, getting its
indicator to light.
1. Set the desired tones and other settings.
The following screen appears.
fig.06-010d
2. Hold down the [Function] (Exit) button and press
the [Enter] button.
This activates Panel Lock.
*
Pressing buttons during playback or recording of a song stops
the playback or recording.
2. Press the [Song] (Select -) button or [
] (Select
+) button to select the settings screen.
fig.06-020d
You can perform by playing the keys.
You can adjust the volume with the [Volume] knob and
adjust the tone of the sounds with the [Brilliance] knob.
The following screen appears when Panel Lock is in
force.
3. Press the [Song] (Select -) button or [
] (Select
fig.06-001d
+) button so the value of the parameter you want
to change is flashing.
fig.06-030d
Cancelling the Setting
4. Press the [
] (Value -) button or [
+) button to change the value.
] (Value
1. To cancel Panel Lock, hold down the [Function]
(Exit) button again and press the [Enter] button.
fig.06-031d
Press the [
] (Value -) and [
] (Value +) buttons
simultaneously to restore the factory-set values.
5. If you want to continue making changes to other
settings, press the [Song] (Select -) button or
[
] (Select +) button to switch the settings
screen.
How to Exit Function Mode
1. Press the [Function] (Exit) button so the indicator
goes out.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
■ Changing the Functions of the
Changing the Remote Control
Settings
Remote Control’s Buttons
You can change the functions assigned to the remote
control’s buttons.
■ Disabling Use of the Remote
→ You can use the Memory Backup function to store these
Control
You can prevent the included remote control from
controlling the RG-3 by turning the Remote Control function
off.
1. Press the [Function] (Exit) button, getting its
indicator to light.
This prevents settings from being altered inadvertently if any
buttons on the remote control are pressed by mistake.
2. Press the [Song] (Select -) button or [
] (Select
+) button to display the REMOTE screen.
→ The remote control’s functions are switched on and off together
control’s functions are disabled when infrared transmission is
turned off.
fig.06-040d
→ You can use the Memory Backup function to store these
3. Press the [Song] (Select -) button or [
] (Select
+) button so that the value for the remote control’s
button whose function you want to change is
flashing.
1. Press the [Function] (Exit) button, getting its
indicator to light.
2. Press the [Song] (Select -) button or [
] (Select
Value
Description
+) button to display the REMOTE screen.
Remote Control TRANSPOSE [-] [+] but-
tons
Transpose
fig.06-040d
F1
F2
Remote Control [FUNC 1] button
Remote Control [FUNC 2] button
fig.06-060d
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “Receive” to flash.
fig.06-041d
fig.06-061d
4. Press the [
] (Value -) button or [
+) button to switch the Remote Control function
on or off.
] (Value
4. Press the [
] (Value -) button or [
+) button to switch the function assigned to the
remote control’s buttons.
] (Value
Value
On
Description
The RG-3 can be controlled using the re-
mote control.
Functions Assigned to the TRANSPOSE [-]
and [+] Buttons
The remote control is disabled.
Off
*
The infrared transmission functions used
by external devices are also disabled.
Value
Description
Transposes the key of the song being
played.
Transpose
Press the TRANSPOSE [-] button to
lower the key; press the TRANSPOSE
[+] button to raise the key.
5. Press the [Function] (Exit) button so the indicator
goes out.
Fast forwards and rewinds the song.
When TRANSPOSE [-] is pressed, the
song rewinds; when TRANSPOSE [+]
is pressed, the song is fast forwarded.
Bwd/Fwd
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
Value
Description
Changing the CD Settings
Changing the volume of the Song on
Press the TRANSPOSE [-] button to de-
crease the volume, and press the
TRANSPOSE [+] button to increase the
volume.
■ Adjusting CD and Audio File
Levels
CD Level
Use this procedure to adjust the volume level of the CD or
audio file when playing back a CD or audio file.
*
This function is valid when a CD drive
is connected.
→ You can use the Memory Backup function to store these
Functions Assigned to the [FUNC 1] and
[FUNC 2] Buttons
1. Press the [Function] (Exit) button, getting its
indicator to light.
Value
Description
2. Press the [Song] (Select -) button or [
] (Select
Random
Plays back the songs in random order.
+) button to display the CD/AUDIO screen.
Switches the equalizer on and off
Equalizer
fig.06-110d
and off.
Minus One
Ejects or loads the CD.
Eject/Load
CentrCancl
*
This function is valid when a CD drive
is connected.
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “Level” to flash.
off.
fig.06-120d
5. Press the [Function] (Exit) button so the indicator
goes out.
4. Press the [
] (Value -) button or [
+) button to adjust the playback volume of the
CD or audio file.
] (Value
Value
0–127
Description
Raising the value increases the volume level.
5. Press the [Function] (Exit) button so the indicator
goes out.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
*
Center Cancel is cancelled (switched off) when you switch to a
different song.
■
Enjoying Karaoke with
Commercial CDs (Center Cancel)
You can minimize the vocal portions of commercial audio
CDs or audio files and sing these parts yourself.
9. Press the [
] button once more to stop
playback of the song.
This is a handy way to enjoy karaoke and practice your
singing with your favorite audio CDs or audio files.
■ Switching VIMA CD-ROM
Recommended Tones
NOTE
Songs on VIMA CD-ROMs (VIMA TUNES) are programmed
with “recommended tones” suitable for each song.
You may find that using Center Cancel reduces the tone
quality of some songs.
When you select a song, the recommended tones are
assigned to the RG-3’s Tone buttons, and those Tone buttons
then flash.
1. Place the CD you want to play back in the CD
drive.
When you press a flashing Tone button, the recommended
tone is then selected, enabling you to perform the selected
song using a tone matched to that song as it plays back.
3. Press the [Function] (Exit) button so the indicator
is lit.
You can set the RG-3 so that the recommended tones are
automatically assigned (On) or not assigned (Off).
4. Press the [Song] (Select -) button or [
] (Select
→ You can use the Memory Backup function to store these
+) button to display the CD/AUDIO screen.
fig.06-110d
1. Press the [Function] (Exit) button, getting its
indicator to light.
2. Press the [Song] (Select -) button or [
] (Select
5. Press the [Song] (Select -) button or [
] (Select
+) button to display the MISC screen.
fig.06-141d
+) button so the value set for “Center Cancel”
begins flashing.
fig.06-121d
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “Recommended
Tone” to flash.
6. Press the [
] (Value -) button or [
+) button to switch Center Cancel on or off.
] (Value
fig.06-142d
Value
On
description
The sounds of the melody and vocals are
minimized.
Off
Center Cancel is disabled.
4. Press the [
] (Value -) button or [
+) button to switch the recommended tone setting
on or off.
] (Value
7. When you have finished making the settings,
press the [Function] (Exit) button so the indicator
goes out.
Value
On
Description
The recommended tones are automatically
assigned to the RG-3’s Tone buttons.
8. Press the [
] button.
The recommended tones are not used, and
only the RG-3’s internal tones can be select-
ed.
The song on the CD plays back.
Off
When the song is played, sounds including the melody
and vocals are temporarily minimized.
This is set to “On“ at the factory.
NOTE
5. Press the [Function] (Exit) button so the indicator
With some songs, the vocals may not be eliminated
completely.
goes out.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
7. Press the [Enter] button.
A confirmation message appears in the screen.
fig.06-160d
Initializing the User Memory,
USB Memory, and Floppy Disks
You can delete all of the data in the User memory, in USB
memory, or on floppy disks and restore (initialize) the data
to the original default factory settings.
The RG-3 contains an internal memory area to which you can
save recorded performances and other data.
If you press the [Function] (Exit) button, none of the data
in User memory, USB memory, or on the floppy disk is
erased, and you’re returned to the original screen.
This area is called the “User Memory.”
The following content is stored in the User Memory.
8. Press the [Enter] button once more.
The data in the User memory or USB memory or on the
• Content in saved User Program (favorite performance
floppy disk is deleted.
*
Be sure not to turn off the power as long as “Executing...” is
displayed. Turning off the power at this time may corrupt the
RG-3’s internal memory and render it unusable.
*
Executing this procedure does not initialize any settings other
than the content of the User Memory. To restore the factory
defaults for settings other than the User Memory content,
1. To initialize your USB memory, first connect the
USB memory to the Ext Memory port.
If you want to initialize a floppy disk, insert the
floppy disk in the floppy disk drive.
2. Press the [Function] (Exit) button, getting its
indicator to light.
3. Press the [Song] (Select -) button or [
] (Select
] (Select
+) button to display the FILE screen.
4. Press the [Song] (Select -) button or [
+) button so “FORMAT” is flashing.
fig.06-150d
5. Press the [Enter] button.
6. Press the [
] (Value -) button or [
+) button to select the memory to be initialized.
] (Value
fig.06-151d
Value
Description
User
Memory
Contents of the User Memory
Ext
Memory
Contents of the USB memory connected to
the Ext Memory port
Floppy
Disk
Contents of the Floppy disk
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
Using the V-LINK Function
Playing the Automatic Demos
Connecting the RG-3 to a V-LINK compatible image device
allows you to control the images with the RG-3.
You can set the RG-3 so that it automatically starts a demo
performance when you turn it on.
You also can have a slide show of your favorite images play
simultaneously in the connected external display or
television.
V-LINK
V-LINK (
) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily
enjoy a wide range of visual effects that are linked to the
expressive elements of a music performance.
NOTE
Use USB memory available from Roland.
Proper operation cannot be guaranteed if other external
memory products are used.
1. Press the [Function] (Exit) button, getting its
indicator to light.
Preparing the Songs to Be Played
2. Press the [Song] (Select -) button or [
] (Select
1. After connecting the USB memory to the
computer, create a folder named “AUTODEMO”
on the USB memory.
+) button to display the MIDI screen.
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “V-LINK” to flash.
2. Save the songs (SMF data) you want to have
fig.06-170d
played in the “AUTODEMO” folder.
When Running Slide Shows Through a
Connected External Display or Television
4. Press the [
] (Value -) button or [
+) button to switch the V-LINK function on or off.
] (Value
Value
On
Description
*
You cannot use a television and external display
simultaneously.
The V-LINK function is switched on.
You can control images using the twelve
keys at the left end of the keyboard.
4. Prepare the images you want to have appear in
the slide show and save them to the USB memory
Off
The V-LINK function is switched off.
This is set to “Off” when you turn on the power.
NOTE
5. Connect the USB memory to the Ext Memory port
While V-LINK is switched on, no sound is produced
when you press any of the twelve keys at the left end of
the keyboard.
6. Turn on the power to the external display or
television.
→ When the V-LINK function is on, the V-LINK icon (
)
7. Turn on the power to the RG-3.
appears on the Song Select screen and Tone screen.
After you turn on the power, the songs saved in the USB
memory’s “AUTODEMO” folder are played
continuously.
5. Press the [Function] (Exit) button so the indicator
goes out.
In addition, when you have your preferred images saved
in the USB memory’s “_PICTURE” folder, a slide show
of the images is displayed on the connected external
display or television.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
Setting the Part To Be Muted/Guide Part
Muting or Reducing the Volume of
a Specific Part (Minus One/Guide)
1. Press the [Function] (Exit) button, getting its
indicator to light.
You can temporarily mute any specific part.
This temporary muting of a specified part is called “Minus
One.”
2. Press the [Song] (Select -) button or [
] (Select
+) button to display the “MinusOne/Guide Part”
screen.
You can also set a specific part to play at a lower volume.
fig.06-190d
This allows you to use the sound of that part as a “guide” for
your own performance.
1. Press the [Function] (Exit) button, getting its
indicator to light.
3. Press the [Enter] button.
2. Press the [Song] (Select -) button or [
] (Select
+) button to display the PLAY screen.
4. Press the [Song] (Select -) button or [
] (Select
fig.06-180d
+) button to select the part to be muted.
fig.06-200d
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “MinusOne/Guide”
to flash.
Value
R
Description
Rhythm Part
fig.06-181d
User Part (Part to which performance re-
corded with the RG-3 is saved)
1
2
3
4
Accompaniment Part
Left-hand Part
Right-hand Part
4. Press the [
] (Value -) button or [
+) button to switch the Minus One/Guide
function on and off.
] (Value
5. Press the [
] (Value -) button or [
+) button to switch the mute or guide function on
or off.
] (Value
Value
Guide
Description
fig.06-201d
The volume of the specified part is re-
duced.
Set the part to be played at the lower vol-
The [ ] indication appears next to the part number of a
muted or guide part.
The specified part is muted.
Mute
Off
→ Performances recorded on the RG-3 are saved to Part 1. In
Split performances, however, the right-hand performance is
recorded to Part “4,” while the left hand is recorded to Part
“3.”
The Minus One/Guide function is
switched off.
5. Press the [Function] (Exit) button so the indicator
6. Repeat steps 4 and 5 as required.
goes out.
7. After specifying the muted or guide part, press
the [Function] (Exit) button.
This confirms selection of the muted or guide part.
8. Press the [Function] (Exit) button so the indicator
goes out.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
Menu
Clef L
Value
Auto
Description
Changing the Notation
Display Settings
When displaying notations on a connected external display
or television, you can change the parts that appear in the
notation and the way the score is displayed.
Display is switched automati-
cally.
The left-hand part appears in
the G (treble) clef staff.
G
The left-hand part appears in
the F (bass) clef staff.
F
Display is switched automati-
cally.
Auto
G
1. Press the [Function] (Exit) button, getting its
indicator to light.
The right-hand part appears in
the G (treble) clef staff.
Clef R
2. Press the [Song] (Select -) button or [
] (Select
The right-hand part appears in
the F (bass) clef staff.
F
+) button to display the NOTATION screen.
fig.06-210d
Auto
Key is switched automatically.
#x6, #x5,
#x4, #x3,
#x2, #, 0, b,
bx2, bx3,
bx4, bx5
Key
Display the notation in the se-
lected key.
3. Press the [Song] (Select -) button or [
] (Select
Select the part to be displayed
as the left hand part.
+) button to select the parameter whose settings
you want to change.
1–16
Auto
1–16
Auto
Part L
Part R
Part is switched automatically.
fig.06-210d
Select the part to be displayed
as the right hand part.
Part is switched automatically.
fig.06-220d
4. Press the [
] (Value -) button or [
+) button to change the setting.
] (Value
5. Press the [Function] (Exit) button so the indicator
goes out.
Menu
Value
L+R
Description
Display the right and left hand
parts notation.
Display the right hand part no-
tation.
R
L
Display the left hand part no-
tation.
The notation for the perfor-
mance recorded on the RG-3 is
displayed.
User
*
The following occurs when the recording
contains Split performances.
Staff
• When “L+R” is selected
The notations for the left-hand and right-
hand performances are displayed.
• When “L” is selected
The notation for the left-hand perfor-
mance is displayed.
• When “R” is selected
The notation for the right-hand perfor-
mance is displayed.
• When “User” is selected
No notation is displayed.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Changing Various Settings
5. Press the [Function] (Exit) button so the indicator
Changing the Infrared
Transmission Function Settings
goes out.
Some digital devices equipped with an IrDA (infrared) port
are able to transfer song data in SMF format to the RG-3. For
more detailed information, refer to the owner’s manual for
the digital device.
■
Setting Playback After the Song is
Transferred (Infrared Playback)
This sets the RG-3 to play back a song automatically
following transfer of the song from the digital device.
NOTE
You can also set this so that songs are not played back
automatically after the song is transferred.
Users are responsible for learning how to use infrared
transmissions. The RG-3 is not necessarily compatible
with all devices equipped with an IrDA port.
Roland cannot answer questions regarding infrared
transmissions.
1. Press the [Function] (Exit) button, getting its
indicator to light.
2. Press the [Song] (Select -) button or [
] (Select
■
Switching Infrared Transmissions
On and Off (Infrared Function)
+) button to display the iR screen.
fig.06-090d
You can set whether to have the song data infrared
transmission function on (active) or off (disabled).
→ The infrared transmission function is switched on and off
infrared transmission function is disabled when remote
control’s function is turned off.
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “iR Play” to flash.
fig.06-100d
→ You can use the Memory Backup function to store these
1. Press the [Function] (Exit) button, getting its
indicator to light.
4. Press the [
] (Value -) button or [
+) button to switch the infrared playback function
setting.
] (Value
2. Press the [Song] (Select -) button or [
] (Select
+) button to display the REMOTE screen.
fig.06-040d
Value
Auto
Description
The song is played back automatically after
the song is transferred.
Following transfer of the song, the song is
ready to play but not played back.
Standby
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “Receive” to flash.
5. Press the [Function] (Exit) button so the indicator
fig.06-041d
goes out.
4. Press the [
] (Value -) button or [
+) button to switch infrared transmission on or off.
] (Value
Value
On
Description
The song data infrared transmission func-
tion is enabled.
The song data infrared transmission func-
tion is disabled. Song data cannot be trans-
ferred.
Off
*
The included remote control unit is also
disabled.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Connecting External Devices
4. Switch on the RG-3.
5. Switch on the connected device.
Connecting to Audio Equipment
You can connect audio devices to play the sound of the RG-3
6. Adjust the volume level on the RG-3 and the
through the speakers of your audio system, or to record your
performance on a recording device.
connected device.
→ You can adjust the volume of a connected sound module with
■ Connectors
the RG-3.
fig.07-010
Jack Panel
Recording RG-3 Performances on a Recording Device
7. Start recording with the connected device.
8. Play the keyboard.
9. When the performance ends, stop recording on
the connected equipment.
Output Jacks
Turning off the power
You can connect audio equipment using audio cables
(sold separately) and play the sounds from the RG-3
through the speakers on the connected equipment, or
record your performances on a recording device.
1. Set the volume of the RG-3 and of the connected
devices to the minimum position.
2. Turn off the connected equipment.
3. Turn off the power to the RG-3.
If the input of the connected device is monaural, you
must use the L (Mono) jack.
4. Disconnect the audio cables connected to the RG-3.
Input Jacks
You can connect another sound generator, such as audio
equipment or an electronic instrument, using audio
cables (sold separately). Play the sounds from the
connected device through the speakers on the RG-3.
Playing Audio Equipment Sounds Through
the Speakers on the RG-3
fig.07-030
Jack Panel
If the output of the connected device is monaural, you
must use the L (Mono) jack.
Output R/L
(Line Out, Aux Out)
*
You cannot use the RG-3 to adjust the volume of the connected
sound generating device.
■ Making the Connections
NOTE
1. Turn the volume all the way down on the RG-3
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
and on the device you’re about to connect.
2. Turn off the power to the RG-3 and other
connected equipment.
Playing Sounds from the RG-3 Through the
Speakers on Audio Equipment or Recording
Your Performances on a Recording Device
3. Use audio cables (sold separately) to make the
connection.
4. Turn on the connected equipment.
5. Turn on the RG-3.
fig.07-020
Jack Panel
6. Adjust the volume level on the RG-3 and the
Input R/L
(Line In, Aux In)
connected device.
*
You cannot use the RG-3 to adjust the volume of the connected
sound generating device.
Turning off the power
1. Turn the volume all the way down on the RG-3
1. Set the volume of the RG-3 and of the connected
and on the device you’re about to connect.
devices to the minimum position.
2. Turn off the power to the RG-3 and other
2. Turn off the power to the RG-3.
connected equipment.
3. Turn off the connected equipment.
3. Use audio cables (sold separately) to make the
4. Disconnect the audio cables connected to the RG-3.
connection.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Connecting External Devices
2. Switch off the power to the RG-3 and the device
Connecting MIDI Devices
you’re about to connect.
By connecting an external MIDI device and exchanging
performance data, you can control one device from the other.
3. Use a MIDI cable (sold separately) to connect the
MIDI connectors to each other.
For instance, you can output sound from the other
instrument or switch Tones on the other instrument.
Please refer to the connection examples below.
4. Switch on the power to the RG-3 and the
■ What’s MIDI?
connected device.
MIDI, short for “Musical Instrument Digital Interface,” was
developed as a universal standard for the exchange of
performance data between electronic instruments and
computers.
5. Adjust the volume level on the RG-3 and the
connected device.
6. You should also set the MIDI settings as needed.
The RG-3 is equipped with MIDI connectors to let it
exchange performance data with external devices. These
connectors can be used to connect the RG-3 to an external
device for even greater versatility.
For details on the MIDI-related settings, refer to previous
section.
■ Connection Examples
■ Connectors
fig.07-080
Setup with a MIDI Sequencer
fig.07-090
Jack Panel
Jack Panel
Roland MT Series
Out
MIDI
In
OUT
IN
MIDI Out Connector
Connect this to the MIDI In connector on an external
MIDI device using a MIDI cable (sold separately).
*
When the RG-3 is connected to a MIDI sequencer, set it to
In addition, turn the MIDI sequencer’s Thru function ON.
The sequencer takes the performance data received at the MIDI
IN connector and outputs the data unchanged from the MIDI
OUT connector.
Performance data when you play the keyboard or
depress a pedal is sent from this connector to the
external MIDI connector.
MIDI In Connector
Connect this to the MIDI Out connector on an external
MIDI device using a MIDI cable (sold separately).
To determine whether or not your sequencer features a MIDI
Thru function and for instructions on making the Thru
function setting, refer to the owner’s manual for your
sequencer.
This receives MIDI messages that are sent from external
MIDI devices.
The RG-3 receiving MIDI messages can output sounds,
exchange tones and perform other operations.
*
External MIDI devices can’t be used for remotely changing the
Tones played by the RG-3’s keyboard.
Connecting with a MIDI Sound Module
fig.07-100
Jack Panel
MIDI Sound Module
MIDI
OUT
■ Making the Connections
THRU
IN
NOTE
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
IN
1. Turn the volume all the way down on the RG-3
and on the device you’re about to connect.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Connecting External Devices
■
Disconnecting the Internal Sound
Making MIDI-related Settings
Here’s how you can set the transmit channel and other MIDI
related settings.
Generator and Keyboard (Local Control)
When connecting a MIDI sequencer, set Local Control to
“OFF.” The setting is at “Local Control ON” when the RG-3
is powered up.
■ MIDI Transmit Channel Settings
As illustrated, information describing what has been played
on the keyboard is passed to the sound module over two
different routes, (1) and (2).
MIDI features sixteen MIDI channels, numbered 1–16.
Simply connecting a cable is not enough for communication
to take place. The connected devices must be set to use the
same MIDI channels. Otherwise, no sound will be produced,
and no sounds can be selected.
As a result, you hear overlapping or intermittent sounds.
To prevent this from happening, route (1) must be disabled,
by setting the unit to what is known as “Local Off.”
fig.07-130
The RG-3 receives all channels 1–16.
Local On
(1)
1. Press the [Function] (Exit) button, getting its
Sequencer
Memory
indicator to light.
MIDI
OUT
MIDI
IN
Sound
Generator
2. Press the [Song] (Select -) button or [
] (Select
+) button to display the MIDI screen.
MIDI
OUT
MIDI
IN
fig.07-110d
Soft Thru On
(2)
Each note played is sounded twice
Local On:
The keyboard and internal sound generator are
connected.
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “Tx Ch” (Transmit
channel) to flash.
fig.07-140
fig.07-120d
Sound is emitted
Sound Generator
Local On
4. Press the [
] (Value -) button or [
+) button to set the MIDI Transmit channel.
] (Value
Value: 1–16
Local Off:
5. Press the [Function] (Exit) button so the indicator
The keyboard and internal sound generator are
separated. No sound will be produced by the keyboard
when it is played.
goes out.
fig.07-150
No sound produced
Sound Generator
Local Off
→ When connecting a unit in the Roland MT series, you don’t
need to switch off Local Control. MT units transmit Local Off
messages when their power is switched on. If you first switch
on the RG-3, then the MT-series device, Local Control is
automatically switched off on the RG-3.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Connecting External Devices
1. Press the [Function] (Exit) button, getting its
■
Sending Tone Change Messages (Program
Change/Bank Select MSB/Bank Select LSB)
indicator to light.
A Program Change is a message that means “change to the
Tone of the specified number.” The device that receives this
changes to the Tone of the corresponding number.
2. Press the [Song] (Select -) button or [
] (Select
+) button to display the MIDI screen.
fig.07-110d
When you choose a Program Change message (Program
Number), the Program Number will be transmitted to the
MIDI device connected to the RG-3.
The MIDI device that receives the Program Number changes
the tone to the corresponding Program Number.
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “Local” (Local
Control) to flash.
Normally, the Tone is selected from the 128 Tones available.
Some MIDI devices, however, have more than 128 Tones.
fig.07-151d
With such devices, the Tone is selected through a
combination of Program Change messages and Bank Select
messages. There are two parts of a Bank Select message: the
MSB (Controller 0, with a value of 0–127) and the LSB
(Controller 32, with a value of 0–127).
4. Press the [
] (Value -) button or [
+) button to switch Local Control on or off.
] (Value
*
Some MIDI instruments can’t handle Bank Select messages.
Others can handle Bank Selects, but do not recognize the LSB
part.
Value
On
Description
Local Control is switched on.
Local Control is switched off.
Off
1. Press the [Function] (Exit) button, getting its
indicator to light.
5. Press the [Function] (Exit) button so the indicator
goes out.
2. Press the [Song] (Select -) button or [
] (Select
+) button to display the MIDI screen.
fig.07-110d
3. Press the [Song] (Select -) button or [
] (Select
+) button so that the value set for “PC,” “Bank
Select MSB,” or “Bank Select LSB” is flashing.
fig.07-170d
Bank Select MSB
Bank Select LSB
Ch:
Setting the MIDI Channel Used for
Transmitting Program Numbers When
Switching User Programs
PC:
Program Number
Bank Select MSB
Bank (Left):
Bank (Right): Bank Select LSB
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Connecting External Devices
4. Press the [
] (Value -) button or [
+) button to set the Program Change number,
Bank Select MSB, or Bank Select LSB.
] (Value
Value
On
Description
The performance data recorded with the
RG-3 can be sent to the connected MIDI de-
vice or computer.
Menu
Value
The performance data recorded with the
RG-3 cannot be sent to the connected MIDI
device or computer.
- - (Off), 1–16
Off
Ch
*
When set to - - (Off), no Program
Change Number is transmitted,
even when User programs are
switched.
(User Program
Transmit Channel)
5. Press the [Function] (Exit) button so the indicator
goes out.
PC
1–128
Bank Select MSB 0–127
If you wish to save the performance recorded on the RG-3,
use the following procedure.
Bank Select LSB 0–127
In this situation, your external sequencer is set its MIDI Thru
feature to be OFF.
5. Press the [Function] (Exit) button so the indicator
goes out.
For details, refer to the owner’s manual of your MIDI
sequencer.
■
Sending Recorded Performance Data
to a MIDI Device (Composer MIDI Out)
1. Connect a MIDI sequencer such as the MT series
When Composer MIDI Out is active, you can send
performance data recorded with the RG-3 to a connected
MIDI device or computer.
3. Set this setting to “On.”
When you turn on the power, this is set to “Off” (data is not
sent).
4. Start recording with the connected MIDI
sequencer.
If you want to transmit a performance recorded on the RG-3
to an external MIDI device or computer, turn this setting
“On.” If this is “Off,” the data will not be transmitted.
5. Start playback of the recorded song on the RG-3.
6. When playback ends, stop recording with the
1. Press the [Function] (Exit) button, getting its
connected MIDI sequencer.
indicator to light.
7. Use a connected MIDI sequencer to save the data
2. Press the [Song] (Select -) button or [
] (Select
on a floppy disk or other media.
+) button to display the MIDI screen.
fig.07-110d
3. Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “Composer MIDIOut”
to flash.
fig.07-190d
4. Press the [
] (Value -) button or [
+) button to switch the song’s MIDI Out setting
on or off.
] (Value
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Connecting External Devices
Connecting to the Computer
You can use a USB connector to connect the RG-3 to your
computer.
Making the Settings for the
USB Driver
If you intend to connect to a computer using the USB
connector, you need to make the following setting before you
make the connection.
For more details, refer to the separate “USB Installation
Guide.”
In the factory settings, “Original” is selected. Normally, there
is no need to change the USB driver settings.
NOTE
• Connecting your computer to the RG-3 for the first time
requires installation of the “USB Driver” (on the
included CD-ROM) to the computer.
1. Press the [Function] (Exit) button, getting its
indicator to light.
• Only MIDI data can be transmitted using USB.
2. Press the [Song] (Select -) button or [
] (Select
• To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any
connections.
+) button to display the MIDI screen.
fig.07-200d
• USB cables are not included. Consult your Roland dealer
if you need to purchase.
3. Press the [Song] (Select -) button or [
] (Select
• Turn on the power to the RG-3 before starting up MIDI
applications on the computer. Do not turn the RG-3 on
or off while any MIDI application is running.
+) button to get the value for “USB Driver” to
flash.
fig.07-210d
• If not using USB, disconnect the USB cable from the RG-
3.
• If during the transmission/reception of data, the
computer switches to energy-saving mode or suspended
mode, or if the RG-3’s power is switched on or off, the
computer may freeze, or the RG-3’s operation may
become unstable.
4. Press the [
] (Value -) button or [
+) button to select the USB driver.
] (Value
Indication Description
Select this when using a generic USB driver
included with the OS with a USB connec-
tion.
Generic
For more on system requirements, refer to the “USB
Installation Guide.”
Select this when using the supplied driver
with a USB connection.
Under ordinary circumstances, use this
mode.
However, note that the RG-3 is not compatible with
Mac OS 9.
Original
This is an auxiliary mode.
It is not normally used.
Original2
5. Press the [Function] (Exit) button so the indicator
goes out.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
Troubleshooting
Case
Cause/Remedy
Is the pedal connected correctly?
Has a different function been assigned to the pedal?
The power doesn’t come on
Depressing a pedal has no
effect, or the pedal effect
doesn’t stop
The volume level of the in-
strument connected to Input
jacks is too low
Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
Do you have different external devices plugged into different power outlets?
When connecting external devices, always draw power from the same outlet.
Is the USB memory you are using one that was produced by Roland?
Performance is not guaranteed when other types of USB memory are used.
Low hum coming from
external device
Unable to load properly with
USB memory
Try the following procedure. If after these steps you are still unable to get the CD to eject, read
the CD drive owner’s manual.
1. Turn off the power to all connected devices.
2. Turn on the RG-3.
Unable to eject the CD
3. Turn on the CD drive.
4. Wait a few moments after the power is switched on, then firmly press the eject button.
Connected Television or External Display Screen Looks Odd
Is the external display’s power turned on?
Are you using a display that is compatible with the RG-3?
Images not shown on external
display or television when
external display or television
is connected
Thin horizontal lines visible
in the television screen
While narrow horizontal lines may be visible in the television screen, this is a particular char-
acteristic of the television set and does not indicate any problem with the RG-3.
Even when all recommended settings are used, images may still not be displayed well with
the television set you are using (images may not match the screen size, and may be clustered
towards the center of the screen).
Poor-quality of images
displayed in television
No sound is heard
When headphones or plugs are connected, the keyboard’s speaker stops playing.
Could the keyboard volume be turned down completely in the volume balance settings?
No sound is heard
Could the levels of all frequency ranges be turned down completely in the equalizer settings?
Is V-LINK switched on? While V-LINK is switched on, no sound is produced when you press
Have all devices been switched on?
No sound is heard
(when a MIDI instrument is
connected)
Has Local Control been set to “Off”?
When Local Control is set to Off, no sound is produced by playing the keyboard. Set Local
No sound is heard when the
keyboard is played
The maximum number of notes can play simultaneously is 128.
Frequent use of the damper pedal during playing along with a song may result in perfor-
mance data with too many notes, causing some notes to drop out.
Not all played notes are
sounded
The sound is strange
Alternatively, the sequencer could be set so its Soft Thru feature is Off.
Sounds are heard twice (dou-
bled) when the keyboard is
played
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Case
Cause/Remedy
The tuning or pitch of the
keyboard or song is off
Since the RG-3’s piano sounds accurately reproduce the depth and reverberation of the orig-
inal acoustic piano, you may find that reverberation is audible when the Key Off Resonance
function is enabled. If you want to eliminate the reverberation, turn off the Key Off Resonance
Reverberation still audible
even with Reverb turned off
On an acoustic piano, notes in the upper one and a half octaves of the keyboard continue to
sound until they decay naturally, regardless of the damper pedal.
There is a difference in the timbre as well. Roland pianos faithfully simulate such characteris-
tics of the acoustic piano.
On the RG-3, the range that is unaffected by the damper pedal will change depending on the
Key Transpose setting.
In the upper range, the sound
changes abruptly beyond a
certain key
When listening through headphones:
Some of the more flamboyant and effervescent piano tones feature an ample high-end com-
ponent, which may make the sound appear to have metallic reverberation added.
Since this reverberation becomes particularly audible when supplemented by heavy reverb,
you may be able to diminish the problem by reducing the amount of reverb applied to the
sound.
A High-pitched whine is
produced
When listening through speakers:
Here, a different cause (such as resonance produced by the RG-3) would be suspect. Consult
your Roland dealer or nearest Roland Service Center.
When listening through speakers:
Playing at loud volumes may cause instruments near the RG-3 to resonate.
Resonation can also occur with fluorescent light tubes, glass doors, and other objects. In par-
ticular, this problem occurs more easily when the bass component is increased, and when the
sound is played at higher volumes. Use the following measures to suppress such resonance.
• Place speakers so they are 10–15 cm from walls and other surfaces.
• Reduce the volume.
The bass range sounds odd, or
there is a vibrating resonance
• Move the speakers away from any resonating objects.
When listening through headphones:
Here, a different cause (such as resonance produced by the RG-3) would be suspect. Consult
your Roland dealer or nearest Roland Service Center.
Song doesn’t play back correctly
The internal songs cannot be played back while recorded performance data remains in the
RG-3’s memory.
Song doesn’t play back
Erase the performance data or play back the song after saving to the “Favorites” or to your
USB memory.
Pressing the [
doesn’t return to the
beginning of the song
] button
Some music files may contain settings that stop play at a point partway through the song.
Press the [
] button several times more to return to the beginning of the song.
If you attempt to play back performance data that contains more data than the entire capacity
of the RG-3’s memory, you may find that operations other than playback (such as rewind or
fast forward) become unavailable.
The [
[
] and
] buttons don’t work
Accompaniment not playing
Can’t record/Can’t play back
Any performance that has been recorded is deleted when the power to the RG-3 is turned off
or a song is selected.
A performance cannot be restored once it’s been deleted. Be sure to save it on a USB memory
The recorded performance
has disappeared
Could you have pressed the remote control’s [MUTE] button and muted the sound?
Unable to play back songs
Reading of data from the CD starts when the CD is inserted in the drive.
It may take a few moments to complete reading of the data.
Can’t play back a song from
CD
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Indication
Error 01:
Meaning
You can only read the music file. It can not be saved.
An error occurred during writing. The storage media’s protect tab may be in the “Protect” (writing prohib-
ited) position, or the storage media may not yet be initialized.
Error 02:
Error 10:
Error 11:
No storage media is inserted. Insert the storage media and try again.
There is not sufficient free memory in the save destination.
Either insert other storage media or delete unneeded files and try again.
An error occurred during writing.
The storage media may be corrupted. Insert other storage media and try again.
Alternatively, you can initialize the storage media.
Error 14:
The file is unreadable.
The data format is not compatible with the RG-3.
Error 15:
Error 16:
Data was not called up in time for playback of the song.
After waiting several seconds, you may be able to play back the song by pressing the [
] button again.
The selected image data cannot be displayed.
Error 17:
Error 30:
Error 40:
The internal memory capacity of the RG-3 is full.
The RG-3 cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the RG-3.
A MIDI cable has been disconnected.
Connect it properly and securely.
Error 41:
Error 43:
Error 51:
Error 65:
A MIDI transmission error has occurred.
Check the MIDI cable and connected MIDI device.
There may be a problem with the system. Repeat the procedure from the beginning.
If it is not solved after you have tried several times, contact the Roland service center.
The Ext Memory port was subjected to excessive current.
Check the storage media to confirm that no damage has occurred to it.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone List
fig.08-010
Tone Settings When Using the Split Function (p. 67)
(Tone Number Left-Hand Tone / Right-Hand Tone)
Piano 1
Piano 1
1
2
3
4
Superior Grand
1
2
3
4
A.Bs / SuperiorGrand
A.Bs/SuperiorGnd+Str
A.Bs/SuperiorGnd+Pad
Choir/Piano+FM E.Pno
Superior Grand + Str
Superior Grand + Pad
Piano + FM E.Piano
Piano 2
Piano 2
1
2
3
4
Natural Grand
1
2
3
4
Bs+Ride/NaturalGrand
Natural Grand + Str
Natural Grand + Pad
Piano + Bell
Bs+Ride/Natural+Str
Bs+Ride/Natural+Pad
Choir / Piano + Bell
Harpsichord
Harpsichord
1
2
3
4
Harpsichord
1
2
3
4
Strings/Harpsichord
Coupled Harpsichord
Harpsichord + Choir
Harpsichord + Str
Strings/Coupled Hrps
Strings/Harpsi+Choir
Choir/Harpsichrd+Str
Vibraphone
Vibraphone
1
2
3
4
Vibraphone
1
2
3
4
A.Bs+Ride/Vibraphone
Bell
Choir / Bell
Harp
Strings / Harp
Choir/E.Piano + Pad
Electric Piano + Pad
E.Piano
E.Piano
1
2
3
4
Electric Piano
1
2
3
4
E.Bass/ElectricPiano
FM E.Piano
E.Bass / FM E.Piano
E.Bass/’60s E.Piano
Choir/E.Piano + Str
‘60s Electric Piano
Electric Piano + Str
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Song List
Jazz
Classical
Trio Grande
Liebestraume 3
Etude op10-3
Scrambled Egg
Blue Sky Rag
Je te veux
One Down And Easy
Bop On The Rock
Fly Free
Valse op64-1
Golliwog’s Cakewalk
Fantaisie Impromptu
Arabesque 1
Late Night Chopin
Wedding Song
Yesterday’s Dream
Sun Daze
Nocturne No.2
Gymnopedie 1
Clair De Lune
Keepers Tale
Blauen Donau
Kismet’s Salsa
Roll Over Ludwig
A Prelude To ...
From Matthew’s Passion
Hungarian Rag
Paganini Boogie
Auf Flugeln des Gesanges
Mazurka No.5
Etude op25-1
Etude op10-5
Grande Valse Brillante
Course en Troika
Valse op64-2
Traumerei
Fruhlingslied
Dr. Gradus Ad Parnassum
Radetzky Marsch
Moments Musicaux 3
Prelude op28-15
Ungarische Tanze 5
La priere d’une Vierge
To The Spring
Humoreske
Blumenlied
Gavotte
*
*
All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws.
No data for the music that is played will be output from MIDI OUT.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Parameters Stored to Internal Memory
■ Parameters Stored in Memory Backup
Screen
Display
Description
Page
Touch
Key Touch
KEY TOUCH
Hammer
KeyOff
Hummer Response
Key Off Resonance
String Resonance
Damper Resonance
Master Level
RESONANCE String
Damper
Master
L
Low-frequency Range Level
Midrange Level
High-frequency Range Level
Master Tune
EQUALIZER
M
H
(Master Tune setting)
Stretch
Stretch Tune
TUNE
(Tuning Method)
Key
Temperament
Tonic Note
EFFECT
Reverb
Reverb Level
Remote Control Function On/Off,
Infrared Transmission Function On/Off
Receive
The Function Assigned to the Remote Control’s
[TRANSPOSE] Button
Transpose
REMOTE
F1
The Function Assigned to the Remote Control’s [F1] Button
The Function Assigned to the Remote Control’s [F2] Button
External Display Setting and Television Format
The Duration for Displaying Slide Show Images
Song Playback Method
F2
VGA, NTSC, PAL
Slide Interval
Mode
EXT DISPLAY
PLAY
CD/AUDIO
MISC
Level
Audio CD/Audio File Playback Volume Level
Recommended Tone Function On/Off
Recommended Tone
■ Parameters Stored in the User Program
Screen
Display
– – – – –
Reverb
Key:Acmp
Layer
Description
Page
– – – – –
EFFECT
Selected Tone and Variation
Reverb Setting
Volume Balance
BALANCE
SPLIT
Layer Balance
Split
Split function On/Off
Split Point
Split Point
Keybrd
Playbck
Keyboard Transpose (When the Link is set to Off)
Playback Transpose (When the Link is set to Off)
TRANSPOSE
Keyboard and Playback Transpose
(When the Link is set to On)
Keyboard/Playback
Cent
Left
The Function Assigned to the Center Pedal
The Function Assigned to the Left Pedal
Mic Echo Type
PEDAL
Type
Level
MIC ECHO
Mic Echo Level
MIDI Channel used for transmitting Program numbers
when switching User Programs
Ch
PC
Program Change Number
Bank Select MSB
MIDI
Bank (L)
Bank (R)
Bank Select LSB
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Files That the RG-3 Can Use
What Are Music Files?
Music files contains musical information such as how long the key for a corresponding pitch is played, the force applied to
the key played, and other such information. Performance data is transmitted to the RG-3 from music files saved in USB
memory and played back without change as songs. This is different than a audio CD, since the music file does not contain a
recording of the sound itself. This makes it possible to erase certain parts, or to change instruments, tempos and keys freely,
allowing you to use it in many different ways.
Regarding Copyright
Use of the song data supplied with the Data Disk attached to this product for any purpose other than private, personal
enjoyment without the permission of the copyright holder is prohibited by law. Additionally, this data must not be copied,
nor used in a secondary copyrighted work without the permission of the copyright holder.
■ The RG-3 allows you to use the following music files
SMF with Lyrics
“SMF with Lyrics” refers to SMF (Standard MIDI File) that contains the lyrics. When Music Files carrying the “SMF with
Lyrics” logo are played back on a compatible device (one bearing the same logo), the lyrics will appear in its display.
The RG-3 come equipped with GM 2/GS sound generators.
■ About the RG-3 Sound Generator
The RG-3 come equipped with GM 2/GS sound generators.
General MIDI
The General MIDI is a set of recommendations which seeks to provide a way to go beyond the limitations of proprietary
designs, and standardize the MIDI capabilities of sound generating devices. Sound generating devices and music files that
meets the General MIDI standard bears the General MIDI logo. Music files bearing the General MIDI logo can be played back
using any General MIDI sound generating unit to produce essentially the same musical performance.
General MIDI 2
The upwardly compatible General MIDI 2 recommendations pick up where the original General MIDI left off, offering
enhanced expressive capabilities, and even greater compatibility. Issues that were not covered by the original General MIDI
recommendations, such as how sounds are to be edited, and how effects should be handled, have now been precisely defined.
Moreover, the available sounds have been expanded. General MIDI 2 compliant sound generators are capable of reliably
playing back music files that carry either the General MIDI or General MIDI 2 logo.
In some cases, the conventional form of General MIDI, which does not include the new enhancements, is referred to as
“General MIDI 1” as a way of distinguishing it from General MIDI 2.
GS Format
The GS Format is Roland’s set of specifications for standardizing the performance of sound generating devices.
In addition to including support for everything defined by the General MIDI, the highly compatible GS Format additionally
offers an expanded number of sounds, provides for the editing of sounds, and spells out many details for a wide range of
extra features, including effects such as reverb and chorus. Designed with the future in mind, the GS Format can readily
include new sounds and support new hardware features when they arrive. Since it is upwardly compatible with the General
MIDI, Roland’s GS Format is capable of reliably playing back GM Scores equally as well as it performs GS music files (music
files that have been created with the GS Format in mind). This product supports both the General MIDI 2 and the GS Format,
and can be used to play back music files carrying either of these logos.
XG lite
XG is a tone generator format of YAMAHA Corporation, that defines the ways in which voices are expanded or edited and
the structure and type of effects, in addition to the General MIDI 1 specification. XGlite is a simplified version of XG tone
generation format. You can play back any XG music files using an XGlite tone generator. However, keep in mind that some
music files may play back differently compared to the original files, due to the reduced set of control parameters and effects.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI Implementation Chart
DIGITAL PIANO
Date : Aug. 1, 2006
Version : 1.00
Model RG-3
MIDI Implementation Chart
Transmitted
Recognized
Remarks
Function...
Basic
Channel
Default
Changed
1
1–16
1–16
1–16
Default
Messages
Altered
Mode 3
x
Mode 3
Mode 3, 4 (M=1)
* 2
Mode
**************
Note
Number :
15–113
**************
0–127
0–127
True Voice
Note ON
Note OFF
O
O
O
O
Velocity
*1
*1
After
Touch
Key’s
Ch’s
x
x
O
O
Pitch Bend
x
O
0, 32
O
x
O
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Bank select
Modulation
Portamento time
Data entry
1
O
5
6, 38
7
x
O
x
O
x
O
Volume
10
x
O
Panpot
11
x
O
Expression
Hold 1
Control
Change
64
O
x
O
65
O
Portamento
Sostenuto
66
O
O
x
O
67
O
Soft
84
O
Portamento control
Effect1 depth
Effect3 depth
NRPN LSB, MSB
RPN LSB, MSB
91
O
x
x
x
O (Reverb)
93
O (Chorus)
98, 99
100, 101
O
O
Prog
Change
0–127
**************
O
0–127
: True #
Program number 1–128
System Exclusive
O
O
: Song Pos
: Song Sel
: Tune
x
x
x
x
x
x
System
Common
System
Real Time
: Clock
: Commands
O
x
x
x
x
x
x
x
O
x
O (120, 126, 127)
: All sound off
O
:
Reset all controllers
Aux
Message
O
: Local Control
: All Notes OFF
: Active Sense
: Reset
O (123–125)
O
x
* 1 O x is selectable by SysEx.
* 2 Recognized as M=1 even if M=1.
Notes
Mode 1 : OMNI ON, POLY
Mode 2 : OMNI ON, MONO
O : Yes
X : No
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications
RG-3
<Keyboard>
Keyboard
88 keys (PHA II ivory feel Keyboard with Escapement)
Touch: 100 levels
Touch Sensitivity
Keyboard Mode
Hammer Response: Light, Medium, Heavy, Off
Whole, Layer (as layer tones. volume balance adjustable), Split (split point adjustable)
<Sound Generator> GM2 system, GS format, XG lite compatible
Max. Polyphony
128 voices
20 tones (5 groups 4 variations) for manual performance
600 internal tones for SMF playback (including 15 drum sets, SFX set)
Tones
Temperament
Stretched Tuning
Master Tuning
Key Transpose
8 types, selectable tonic
2 types
415.3–466.2 Hz (adjustable in increments of 0.1 Hz)
-6–+5 (in semitones)
SMF Music Files: -24–+24 (in semitones)
Audio CD/Audio File: -6–+5 (in semitones)
Playback Transpose
Reverb (10 levels), Key Off Resonance (only for piano tones, 9 levels),
String Resonance (only for piano tones, 9 levels), Damper Resonance (only for piano tones, 9 levels),
3-band Digital Equalizer
Effects
Vocal Effects
Mic Echo (9 levels)
<User Programs>
Internal
36
User Memory
USB Memory
Max. 99 User Program Sets
Max. 99 User Program Sets
<Recorder>
Track
1 track
Song
Max. 199 songs
Note Storage
Controls
Approx. 30,000 notes
Song Select, Play/Stop, Rec, Tempo, All Song Play, Random Play, Minus One/Guide
<Media>
CD
Read Only, Playable Discs: Audio CDs (CD-DA), CD-R (SMF)
USB Memory
Floppy Disk
SMF
SMF
<Internal Memory>
Internal Songs
Over 50 (including the Tone Demos)
Favorites Songs, User Programs
User Memory
<Others>
Rated Power Output
40 W x 2
Speakers
Display
20 cm x 2, 5 cm x 2
20 characters, 2 lines LCD
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications
RG-3
VGA, NTSC, PAL
Song Select, Slide Show, Lyrics, DigiScore
External Display
Controls
Volume, Brilliance, LCD Contrast, Mic Volume
Damper (half-pedal recognition), Soft (half-pedal recognition, function assignable),
Sostenuto (function assignable)
Pedals
Other Function
Lid Lock
AC inlet, Pedal connector, Input jacks (L/Mono, R), Output jacks (L/Mono, R), Video Out jack,
Ext Display connector, USB connector, MIDI connectors (IN, OUT), Mic jack,
Phones jack (Stereo) x 2, FDD connector (USB), Ext Memory port (USB)
Connectors
Power Supply
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
70 W
Power Consumption
1,480 (W) x 950 (D) x 1,440 (H) mm (top opened)
58-5/16 (W) x 37-7/16 (D) x 56-3/4 (H) inches
Dimensions
1,480 (W) x 950 (D) x 930 (H) mm (top closed)
58-5/16 (W) x 37-7/16 (D) x 36-5/8 (H) inches
Weight
110 kg / 242 lbs 9 oz
Owner’s Manual, USB Installation Guide, Power Cord, Maintenance Kit, Key Cover, Remote Control,
Dry-cell Batteries
Accessories
Option
USB Memory, Floppy Disk Drive
*
In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Locking
H
M
I
J
K
L
N
O
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
P
Plaing Back
[
S
Saving
Screens
[
Playing Back
R
Remote Control
[
[
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
V
Volume
Volume Balance
T
W
X
U
117
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
When you need repair service, call your nearest Roland Service Center or authorized Roland
distributor in your country as shown below.
PHILIPPINES
CURACAO
TRINIDAD
NORWAY
JORDAN
AFRICA
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
Zeelandia Music Center Inc.
Orionweg 30
AMR Ltd
Roland Scandinavia Avd.
MUSIC HOUSE CO. LTD.
Ground Floor
Kontor Norge
FREDDY FOR MUSIC
P. O. Box 922846
Amman 11192 JORDAN
TEL: (06) 5692696
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany
Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
Curacao, Netherland Antilles
TEL:(305)5926866
Maritime Plaza
Barataria Trinidad W.I.
TEL: (868) 638 6385
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: (02) 899 9801
DOMINICAN REPUBLIC
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Santo Domingo,
Dominican Republic
TEL:(809) 683 0305
TEL: 2273 0074
URUGUAY
Todo Musica S.A.
Francisco Acuna de Figueroa
1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
SINGAPORE
SWEE LEE MUSIC
COMPANY PTE. LTD.
150 Sims Drive,
SINGAPORE 387381
TEL: 6846-3676
KUWAIT
EASA HUSAIN AL-YOUSIFI
& SONS CO.
Abdullah Salem Street,
Safat, KUWAIT
POLAND
MX MUSIC SP.Z.O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
REUNION
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
TEL: 243-6399
ECUADOR
Mas Musika
Rumichaca 822 y Zaruma
Guayaquil - Ecuador
PORTUGAL
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: 22 608 00 60
TAIWAN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung
Shan N.Road Sec.2, Taipei,
TAIWAN, R.O.C.
LEBANON
Chahine S.A.L.
Gerge Zeidan St., Chahine
Bldg., Achrafieh, P.O.Box: 16-
5857
Beirut, LEBANON
TEL: (01) 20-1441
VENEZUELA
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar
REUNION ISLAND
TEL: (0262) 218-429
TEL:(593-4)2302364
SOUTH AFRICA
T.O.M.S. Sound & Music
(Pty)Ltd.
11 Melle St., Braamfontein,
import
EL SALVADOR
OMNI MUSIC
75 Avenida Norte y Final
Alameda Juan Pablo II,
Edificio No.4010 San Salvador,
EL SALVADOR
#7 zona Industrial de Turumo
Caracas, Venezuela
TEL: (212) 244-1122
TEL: (02) 2561 3339
ROMANIA
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni,
ROMANIA
OMAN
THAILAND
Johannesbourg,
TALENTZ CENTRE L.L.C.
Malatan House No.1
Al Noor Street, Ruwi
SULTANATE OF OMAN
TEL: 2478 3443
Theera Music Co. , Ltd.
330 Soi Verng NakornKasem,
New Road, Sumpantawongse,
Bangkok 10100, THAILAND
TEL: (02) 224-8821
SOUTH AFRICA
TEL: (011) 403 4105
FAX: (011) 403 1234
EUROPE
TEL: 262-0788
TEL: (266) 364 609
AUSTRIA
Roland Elektronische
Musikinstrumente HmbH.
Paul Bothner(PTY)Ltd.
Royal Cape Park, Unit 24
Londonderry Road, Ottery 7800
Cape Town, SOUTH AFRICA
TEL: (021) 799 4900
GUATEMALA
RUSSIA
MuTek
Dorozhnaya ul.3,korp.6
117 545 Moscow, RUSSIA
TEL: (095) 981-4967
QATAR
Al Emadi Co. (Badie Studio &
Stores)
P.O. Box 62, Doha, QATAR
TEL: 4423-554
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala
Guatemala
Austrian Office
AUSTRALIA/
NEW ZEALAND
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
TEL:(502) 599-2888
SPAIN
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: 93 493 91 00
HONDURAS
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
3 Ave.11 Calle S.O
San Pedro Sula, Honduras
TEL: (504) 553-2029
AUSTRALIA/
NEW ZEALAND
Roland Corporation
Australia Pty.,Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
SAUDI ARABIA
aDawliah Universal
Electronics APL
Corniche Road, Aldossary
Bldg., 1st Floor, Alkhobar,
SAUDI ARABIA
ASIA
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
MARTINIQUE
Musique & Son
Z.I.Les Mangle
97232 Le Lamantin
Martinique F.W.I.
TEL: 596 596 426860
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
TEL: (014) 575811
For Australia
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 3 Section Anhuaxili
Chaoyang District Beijing
100011 CHINA
Tel: (02) 9982 8266
For New Zealand
Tel: (09) 3098 715
SYRIA
Technical Light & Sound
Center
Rawda, Abdul Qader Jazairi St.
Bldg. No. 21, P.O.BOX 13520,
Damascus, SYRIA
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
Gigamusic SARL
10 Rte De La Folie
97200 Fort De France
Martinique F.W.I.
TEL: 596 596 715222
TEL: (2) 666 10529
CENTRAL/LATIN
AMERICA
TEL: (010) 6426-5050
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: (011) 223-5384
HONG KONG
Tom Lee Music Co., Ltd.
Service Division
22-32 Pun Shan Street, Tsuen
Wan, New Territories,
HONG KONG
UKRAINE
TIC-TAC
Mira Str. 19/108
P.O. Box 180
295400 Munkachevo,
UKRAINE
TEL: (03131) 414-40
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
TURKEY
ZUHAL DIS TICARET A.S.
Galip Dede Cad. No.37
Beyoglu - Istanbul / TURKEY
TEL: (0212) 249 85 10
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico
D.F. MEXICO
TEL: 3916 6200
FINLAND
Roland Scandinavia As, Filial
Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
TEL: 2415 0911
TEL: (55) 5668-6699
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai,
U.A.E.
Parsons Music Ltd.
BARBADOS
UNITED KINGDOM
NICARAGUA
Bansbach Instrumentos
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, Nicaragua
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, Barbados
TEL: (246)430-1100
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844
Norderstedt, GERMANY
TEL: (040) 52 60090
TEL: (04) 3360715
INDIA
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra
Mahalaxmi Flats Compound
Off. Dr. Edwin Moses Road,
Mumbai-400011, INDIA
TEL: (022) 2493 9051
UNITED KINGDOM
TEL: (01792) 702701
BRAZIL
Roland Brasil Ltda.
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
TEL: (505)277-2557
NORTH AMERICA
PANAMA
MIDDLE EAST
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City, REP. DE
PANAMA
GREECE/CYPRUS
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
CANADA
Roland Canada Ltd.
(Head Office)
5480 Parkwood Way
Richmond B. C., V6V 2M4
CANADA
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
BAHRAIN
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
INDONESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
TEL: 315-0101
PARAGUAY
Distribuidora De
Instrumentos Musicales
J.E. Olear y ESQ. Manduvira
Asuncion PARAGUAY
TEL: (595) 21 492147
TEL: (604) 270 6626
TEL: 17 211 005
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint,
HUNGARY
COLOMBIA
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, Colombia
IRAN
MOCO INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
Roland Canada Ltd.
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
KOREA
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
TEL: (23) 511011
PERU
Audionet
Distribuciones Musicales SAC
Juan Fanning 530
Miraflores
TEL: (574)3812529
TEL: (021) 285-4169
TEL: (905) 362 9707
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
COSTA RICA
JUAN Bansbach Instrumentos
Musicales
Ave.1. Calle 11, Apartado
10237,
San Jose, COSTA RICA
TEL: 258-0211
MALAYSIA
ISRAEL
Halilit P. Greenspoon & Sons
Ltd.
8 Retzif Ha'aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
U. S. A.
Roland Asia Pacific Sdn. Bhd.
45-1, Block C2, Jalan PJU 1/39,
Dataran Prima, 47301 Petaling
Jaya, Selangor, MALAYSIA
TEL: (03) 7805-3263
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
Lima - Peru
TEL: (511) 4461388
TEL: (323) 890 3700
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
As of August 1, 2006 (ROLAND)
Download from Www.Somanuals.com. All Manuals Search And Download.
For EU Countries
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
For the USA
DECLARATION OF CONFORMITY
Compliance Information Statement
RG-3
Model Name :
Type of Equipment :
Responsible Party :
Address :
Digital Piano
Roland Corporation U.S.
5100 S.Eastern Avenue, Los Angeles, CA 90040-2938
(323) 890-3700
Telephone :
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|