Roland Electronic Keyboard RD 700GX User Guide

Digital Piano

Date: Feb. 1, 2008

Version: 1.00

MIDI Implementation

Model: RD-700GX

❍Data Entry (Controller number 6, 38)

1. Receive data

Status

BnH

2nd byte

06H

3rd byte

mmH

llH

■Channel Voice Messages

BnH

26H

n = MIDI channel number:

0H - FH (ch.1 - 16)

mm, ll = the value of the parameter specified by RPN/NRPN

mm = MSB, ll = LSB

●Note off

Status

2nd byte

kkH

3rd byte

8nH

vvH

❍Volume (Controller number 7)

9nH

kkH

00H

Status

BnH

2nd byte

07H

3rd byte

n = MIDI channel number:

kk = note number:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

vvH

n = MIDI channel number:

vv = Volume:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

vv = note off velocity:

Some instruments are not received in Rhythm set.

Not received when the Rx Volume (EDIT: Part Parameter: Rx Volume) is OFF.

The Part Level parameter will change.

●Note on

Status

2nd byte

kkH

3rd byte

❍Panpot (Controller number 10)

Status

BnH

9nH

vvH

2nd byte

0AH

3rd byte

n = MIDI channel number:

kk = note number:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

01H - 7FH (1 - 127)

vvH

n = MIDI channel number:

vv = Panpot:

0H - FH (ch.1 - 16)

vv = note on velocity:

00H - 40H - 7FH (Left - Center - Right),

●Control Change

Not received when the Rx Pan (EDIT: Part Parameter: Rx Pan) is OFF.

The pan parameter (EDIT: Part Parameter: Pan) will change.

❍Bank Select (Controller number 0, 32)

Status

BnH

2nd byte

00H

3rd byte

❍Expression (Controller number 11)

mmH

Status

BnH

2nd byte

0BH

3rd byte

BnH

20H

llH

vvH

n = MIDI channel number:

mm, ll = Bank number:

0H - FH (ch.1 - 16)

n = MIDI channel number:

vv = Expression:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

00 00H - 7F 7FH (bank.1 - bank.16384)

Not received when the Rx Bank Select (EDIT: Part Parameter: Rx Bank Select) is OFF.

The SETUP, Rhythms, and Tones corresponding to each Bank Select are as follows.

The SRX series corresponding to each Bank Select are to see the SRX series owner’s

manual.

❍ General Purpose Controller 1 (Controller number 16)

Status

BnH

2nd byte

10H

3rd byte

vvH

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

BANK SELECT

MSB | LSB

| PROGRAM

| NUMBER

| GROUP

| NUMBER

-----+---------+-----------+----------------------+-----------

❍Hold 1 (Controller number 64)

000 |

| 001 - 128 | GM Tone

Status

BnH

2nd byte

40H

3rd byte

032 |

| 001 - 128 | GM Tone

| 001 - 100 | SETUP

| 001 - 005 | Rhythm Set

085 | 000

086 | 064

087 | 064

| 065

| 001 - 100

| 263 - 267

| 001 - 026

| 037 - 057

| 058 - 088

| 099 - 120

| 121 - 146

| 147 - 170

| 171 - 208

| 209 - 236

| 237 - 262

vvH

| 001 - 026 | Tone (PIANO)

| 001 - 021 | Tone (E.PIANO)

| 001 - 031 | Tone (CLAV/MALLET)

| 001 - 022 | Tone (ORGAN)

| 001 - 026 | Tone (STRINGS)

| 001 - 024 | Tone (PAD)

| 001 - 038 | Tone (GTR/BASS)

| 001 - 028 | Tone (BRASS/WINDS)

| 001 - 026 | Tone (VOICE/SYNTH)

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH

| 066

| 067

| 068

| 069

Not received when the Rx Hold-1 (EDIT: Part Parameter: Rx Hold-1) is OFF.

| 070

| 071

| 072

❍Portamento (Controller number 65)

092 | 000 -

| 001 -

| SRX Rhythm

| 001 -

Status

BnH

2nd byte

41H

3rd byte

093 | 000 -

| 001 -

| SRX Patch

| 001 -

vvH

112 | 000

113 | 000

120 |

| 001 - 010 | TW-Organ

| 001 - 010 | S.NaturlEP

| 001 - 057 | GM2 Rhythm

| 001 - 128 | GM2 Tone

| 089 - 098

| 027 - 036

| 268 - 276

| 277 - 532

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

121 | 000 -

The Portamento Sw parameter (Tone Info: Portament Sw) will change.

❍Modulation (Controller number 1)

Status

BnH

2nd byte

01H

3rd byte

vvH

❍Sostenuto (Controller number 66)

Status

BnH

2nd byte

42H

3rd byte

n = MIDI channel number:

vv = Modulation depth:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

vvH

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

Not received when the Rx Modulation (EDIT: Part Parameter: Rx Modulation) is OFF.

❍Soft (Controller number 67)

❍Portamento Time (Controller number 5)

Status

BnH

2nd byte

43H

3rd byte

Status

BnH

2nd byte

05H

3rd byte

vvH

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

n = MIDI channel number:

vv = Portamento Time:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

❍Legato Foot Switch (Controller number 68)

The Portament Time parameter (Tone Info: Portament Time) will change.

Status

BnH

2nd byte

44H

3rd byte

vvH

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

●Pitch Bend Change

●POLY (Controller number 127)

Status

2nd byte

3rd byte

Status

2nd byte

3rd byte

EnH

llH

mmH

BnH

7FH

00H

n = MIDI channel number:

mm, ll = Pitch Bend value:

0H - FH (ch.1 - 16)

n = MIDI channel number:

0H - FH (ch.1 - 16)

00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)

The same processing will be carried out as when All Notes Off is received.

The Mono/Poly parameter (Tone Info: Mono/Poly) will change.

Not received when the Rx Bender parameter (EDIT: Part Parameter: Rx Bender) is OFF.

■Channel Mode Messages

■System Realtime Message

●All Sounds Off (Controller number 120)

●Timing Clock

Status

2nd byte

3rd byte

BnH

78H

00H

n = MIDI channel number:

0H - FH (ch.1 - 16)

F8H

When this message is received, all notes currently sounding on the corresponding

channel will be turned off.

This message will be received if the Clock Source parameter (EDIT: SYSTEM: Clock

Source) is EXT.

●Reset All Controllers (Controller number 121)

●Active Sensing

Status

2nd byte

3rd byte

BnH

79H

00H

FEH

n = MIDI channel number:

0H - FH (ch.1 - 16)

When Active Sensing is received, the unit will begin monitoring the intervals of all

further messages. While monitoring, if the interval between messages exceeds 420 ms,

the same processing will be carried out as when All Sounds Off, All Notes Off and Reset

All Controllers are received, and message interval monitoring will be halted.

When this message is received, the following controllers will be set to their reset values.

Controller

Pitch Bend Change

Channel Pressure

Modulation

Breath Type

Expression

Hold 1

Reset value

0 (center)

0 (off)

■System Exclusive Message

0 (off)

Status

F0H

Data byte

Status

F7H

0 (min)

iiH, ddH, ......,eeH

127 (max)

F0H:

System Exclusive Message status

0 (off)

Sostenuto

Soft

0 (off)

ii = ID number:

an ID number (manufacturer ID) to indicate the manufacturer whose

Exclusive message this is. Roland’s manufacturer ID is 41H.

ID numbers 7EH and 7FH are extensions of the MIDI standard;

Universal Non-realtime Messages (7EH) and Universal Realtime

Messages (7FH).

0 (off)

Hold 2

0 (off)

RPN

unset; previously set data will not change

NRPN

dd,...,ee = data:

F7H:

00H - 7FH (0 - 127)

●All Notes Off (Controller number 123)

EOX (End Of Exclusive)

Status

2nd byte

3rd byte

BnH

7BH

00H

Of the System Exclusive messages received by this device, the Universal Non-realtime

messages and the Universal Realtime messages and the Data Request (RQ1) messages and

the Data Set (DT1) messages will be set automatically.

n = MIDI channel number:

0H - FH (ch.1 - 16)

When All Notes Off is received, all notes on the corresponding channel will be turned

off. However, if Hold 1 or Sostenuto is ON, the sound will be continued until these are

turned off.

●Universal Non-realtime System Exclusive Messages

❍Identity Request Message

●OMNI OFF (Controller number 124)

Status

F0H

Data byte

Status

F7H

Status

2nd byte

3rd byte

7EH, dev, 06H, 01H

BnH

7CH

00H

n = MIDI channel number:

0H - FH (ch.1 - 16)

Byte

F0H

7EH

dev

Explanation

Exclusive status

The same processing will be carried out as when All Notes Off is received.

ID number (Universal Non-realtime Message)

Device ID (dev: 10H - 1FH (1 - 32), the initial value is 10H (17))

Sub ID#1 (General Information)

●OMNI ON (Controller number 125)

06H

01H

F7H

Sub ID#2 (Identity Request)

Status

2nd byte

3rd byte

EOX (End Of Exclusive)

BnH

7DH

00H

n = MIDI channel number:

0H - FH (ch.1 - 16)

When this message is received, Identity Reply message (p. 8) will be transmitted.

The same processing will be carried out as when All Notes Off is received. OMNI ON

will not be turned on.

❍GM1 System On

Status

F0H

Data byte

Status

F7H

7EH, 7FH, 09H, 01H

●MONO (Controller number 126)

Status

2nd byte

3rd byte

Byte

F0H

7EH

7FH

09H

01H

F7H

Explanation

BnH

7EH

mmH

Exclusive status

n = MIDI channel number:

mm = mono number:

0H - FH (ch.1 - 16)

00H - 10H (0 - 16)

ID number (Universal Non-realtime Message)

Device ID (Broadcast)

Sub ID#1 (General MIDI Message)

Sub ID#2 (General MIDI 1 On)

EOX (End Of Exclusive)

The same processing will be carried out as when All Notes Off is received.

The Mono/Poly parameter (Tone Info: Mono/Poly) will change.

Not received when the Rx GM/GM2 System On parameter (EDIT: System: Rx GM/GM2

System ON) is OFF.

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

❍GM2 System On

●Global Parameter Control

Status

F0H

Data byte

7EH 7FH 09H 03H

Status

F7H

❍Reverb Parameters

Status

F0H

Data byte

Status

F7H

Byte

F0H

7EH

7FH

09H

03H

F7H

Explanation

Exclusive status

7FH, 7FH, 04H, 05H, 01H, 01H,

01H, 01H, 01H, ppH, vvH

ID number (Universal Non-realtime Message)

Device ID (Broadcast)

Sub ID#1 (General MIDI Message)

Sub ID#2 (General MIDI 2 On)

EOX (End Of Exclusive)

Byte

F0H

7FH

04H

05H

01H

ppH

vvH

Explanation

Exclusive status

ID number (universal realtime message)

Device ID (Broadcast)

Sub ID#1 (Device Control)

Sub ID#2 (Global Parameter Control)

Slot path length

Not received when the Rx GM/GM2 System On parameter (EDIT: System: Rx GM/GM2

System ON) is OFF.

Parameter ID width

❍GM System Off

Status

F0H

Value width

Data byte

7EH, 7F, 09H, 02H

Status

F7H

Slot path MSB

Slot path LSB (Effect 0101: Reverb)

Parameter to be controlled.

Value for the parameter.

pp=0 Reverb Type

Byte

F0H

7EH

7FH

09H

02H

F7H

Explanation

Exclusive status

ID number (Universal Non-realtime Message)

Device ID (Broadcast)

Sub ID#1 (General MIDI Message)

Sub ID#2 (General MIDI Off)

EOX (End Of Exclusive)

vv = 00H Small Room

vv = 01H Medium Room

vv = 02H Large Room

vv = 03H Medium Hall

vv = 04H Large Hall

vv = 08H Plate

Not received when the Rx GS Reset parameter (EDIT: System: Rx GS Reset) is OFF.

pp=1 Reverb Time

●Universal Realtime System Exclusive Messages

vv = 00H - 7FH 0 - 127

EOX (End Of Exclusive)

F7H

❍Master Volume

Status

F0H

❍Chorus Parameters

Data byte

7FH, 7FH, 04H, 01H, llH, mmH

Status

F7H

Status

F0H

Data byte

Status

F7H

7FH, 7FH, 04H, 05H, 01H, 01H,

01H, 01H, 02H, ppH, vvH

Byte

F0H

7FH

04H

01H

llH

Explanation

Exclusive status

ID number (universal realtime message)

Device ID (Broadcast)

Sub ID#1 (Device Control)

Sub ID#2 (Master Volume)

Master Volume lower byte

Master Volume upper byte

EOX (End Of Exclusive)

Byte

F0H

7FH

04H

05H

01H

02H

ppH

vvH

Explanation

Exclusive status

ID number (universal realtime message)

Device ID (Broadcast)

Sub ID#1 (Device Control)

Sub ID#2 (Global Parameter Control)

Slot path length

mmH

F7H

Parameter ID width

Value width

The lower byte (llH) of Master Volume will be handled as 00H.

The Master Volume parameter (EDIT: System: Master Volume) will change.

Slot path MSB

Slot path LSB (Effect 0102: Chorus)

Parameter to be controlled.

Value for the parameter.

pp=0 Chorus Type

vv=0 Chorus1

❍Master Fine Tuning

Status

F0H

Data byte

7FH, 7FH, 04H, 03H, llH, mmH

Status

F7H

Byte

F0H

7FH

04H

03H

llH

Explanation

Exclusive status

ID number (universal realtime message)

Device ID (Broadcast)

Sub ID#1 (Device Control)

Sub ID#2 (Master Fine Tuning)

Master Fine Tuning LSB

Master Fine Tuning MSB

EOX (End Of Exclusive)

vv=1 Chorus2

vv=2 Chorus3

vv=3 Chorus4

vv=4 FB Chorus

vv=5 Flanger

pp=1 Mod Rate

vv= 00H - 7FH 0 - 127

pp=2 Mod Depth

mmH

F7H

vv = 00H - 7FH 0 - 127

pp=3 Feedback

mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.9 [cents])

❍Master Coarse Tuning

vv = 00H - 7FH 0 - 127

pp=4 Send To Reverb

vv = 00H - 7FH 0 - 127

EOX (End Of Exclusive)

Status

F0H

Data byte

7FH, 7FH, 04H, 04H, llH, mmH

Status

F7H

Byte

F0H

7FH

04H

llH

Explanation

Exclusive status

ID number (universal realtime message)

Device ID (Broadcast)

Sub ID#1 (Device Control)

Sub ID#2 (Master Coarse Tuning)

Master Coarse Tuning LSB

Master Coarse Tuning MSB

EOX (End Of Exclusive)

mmH

F7H

ll:

ignored (processed as 00H)

mm:

28H - 40H - 58H (-24 - 0 - +24 [semitones])

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

❍Channel Pressure

❍Key-based Instrument Controllers

Status

F0H

Data byte

Status

F7H

Status

F0H

Data byte

Status

F7H

7FH, 7FH, 09H, 01H, 0nH, ppH, rrH

7FH, 7FH, 0AH, 01H, 0nH, kkH, nnH, vvH

Byte

F0H

7FH

09H

01H

0nH

ppH

rrH

Explanation

Byte

F0H

7FH

0AH

01H

0nH

kkH

nnH

vvH

Explanation

Exclusive status

ID number (universal realtime message)

Device ID (Broadcast)

ID number (universal realtime message)

Device ID (Broadcast)

Sub ID#1 (Key-Based Instrument Control)

Sub ID#2 (Controller)

MIDI Channel (00 - 0F)

Key Number

Sub ID#1 (Controller Destination Setting)

Sub ID#2 (Channel Pressure)

MIDI Channel (00 - 0F)

Controlled parameter

Controlled range

Control Number

pp=0 Pitch Control

Value

rr = 28H - 58H -24 - +24 [semitones]

pp=1 Filter Cutoff Control

rr = 00H - 7FH -9600 - +9450 [cents]

pp=2 Amplitude Control

rr = 00H - 7FH 0 - 200%

pp=3 LFO Pitch Depth

nn=07H Level

vv = 00H - 7FH

nn=0AH

0 - 200% (Relative)

Pan

vv = 00H - 7FH

nn=5BH

Left - Right (Absolute)

Reverb Send

vv = 00H - 7FH

nn=5D

0 - 127 (Absolute)

Chorus Send

rr = 00H - 7FH 0 - 600 [cents]

pp=4 LFO Filter Depth

vv = 00H - 7FH

0 - 127 (Absolute)

rr = 00H - 7FH 0 - 2400 [cents]

pp=5 LFO Amplitude Depth

rr = 00H - 7FH 0 - 100%

EOX (End Of Exclusive)

This parameter affects drum instruments only.

F7H

❍Controller

Status

●Data Transmission

Data byte

Status

This instrument can use exclusive messages to exchange many varieties of internal settings

F0H

7FH, 7FH, 09H, 03H, 0nH, ccH, ppH, rrH

F7H

with other devices.

The model ID of the exclusive messages used by this instrument is 00H 00H 2BH.

Byte

F0H

7FH

09H

03H

0nH

ccH

ppH

rrH

Explanation

Exclusive status

❍Data Request 1 RQ1 (11H)

This message requests the other device to transmit data. The address and size indicate the

type and amount of data that is requested.

ID number (universal realtime message)

Device ID (Broadcast)

Sub ID#1 (Controller Destination Setting)

Sub ID#2 (Control Change)

MIDI Channel (00 - 0F)

When a Data Request message is received, if the device is in a state in which it is able to

transmit data, and if the address and size are appropriate, the requested data is transmitted

as a Data Set 1 (DT1) message. If the conditions are not met, nothing is transmitted.

Controller number (01 - 1F, 40 - 5F)

Controlled parameter

Status

F0H

data byte

status

F7H

Controlled range

41H, dev, 00H, 00H, 2BH, 11H, aaH, bbH, ccH,

ddH, ssH, ttH, uuH, vvH, sum

pp=0 Pitch Control

rr = 28H - 58H -24 - +24 [semitones]

pp=1 Filter Cutoff Control

rr = 00H - 7FH -9600 - +9450 [cents]

pp=2 Amplitude Control

rr = 00H - 7FH 0 - 200%

Byte

F0H

41H

dev

Remarks

Exclusive status

ID number (Roland)

Devdevice ID (dev: 10H - 1FH, 7FH)

Model ID #1 (RD-700GX)

Model ID #2 (RD-700GX)

model ID #3 (RD-700GX)

Command ID (RQ1)

Address MSB

pp=3 LFO Pitch Depth

00H

2BH

11H

aaH

bbH

ccH

ddH

ssH

rr = 00H - 7FH 0 - 600 [cents]

pp=4 LFO Filter Depth

rr = 00H - 7FH 0 - 2400 [cents]

pp=5 LFO Amplitude Depth

rr = 00H - 7FH 0 - 100%

Address

F7H

EOX (End Of Exclusive)

Address

Address LSB

❍Scale/Octave Tuning Adjust

Status

F0H

Size MSB

Data byte

Status

F7H

ttH

Size

7EH, 7FH, 08H, 08H, ffH, ggH, hhH, ssH...

uuH

vvH

sum

F7H

Size

Size LSB

Byte

F0H

7EH

7FH

08H

ffH

Explanation

Checksum

Exclusive status

EOX (End Of Exclusive)

ID number (Universal Non-realtime Message)

Device ID (Broadcast)

The size of data that can be transmitted at one time is fixed for each type of data. And

data requests must be made with a fixed starting address and size. Refer to the address

and size given in “Parameter Address Map” (p. 9).

Sub ID#1 (MIDI Tuning Standard)

Sub ID#2 (scale/octave tuning 1-byte form)

Channel/Option byte 1

bits 0 to 1 = channel 15 to 16

bit 2 to 6 = Undefined

For the checksum, refer to 14 page.

ggH

hhH

ssH

Channel byte 2

bits 0 to 6 = channel 8 to 14

Channel byte 3

bits 0 to 6 = channel 1 to 7

12 byte tuning offset of 12 semitones from C to B

00H = -64 [cents]

40H = 0 [cents] (equal temperament)

7FH = +63 [cents]

F7H

EOX (End Of Exclusive)

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

❍Data set 1 DT1

2. Data Transmission

This is the message that actually performs data transmission, and is used when you wish to

transmit the data.

■Channel Voice Messages

Status

F0H

Data byte

Status

F7H

●Note off

Status

41H, dev, 00H, 00H, 2BH, 12H, aaH, bbH,

ccH, ddH, eeH, ... ffH, sum

2nd byte

kkH

3rd byte

8nH

vvH

n = MIDI channel number:

kk = note number:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

Byte

F0H

41H

dev

Explanation

Exclusive status

vv = note of velocity:

ID number (Roland)

Device ID (dev: 10H - 1FH, 7FH, Initial value is 10H)

Model ID #1 (RD-700GX)

Model ID #2 (RD-700GX)

Model ID #3 (RD-700GX)

Command ID (DT1)

●Note on

00H

2BH

12H

aaH

bbH

Status

2nd byte

kkH

3rd byte

9nH

vvH

n = MIDI channel number:

kk = note number:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

01H - 7FH (1 - 127)

Address MSB: upper byte of the starting address of the data to be sent

vv = note on velocity:

Address: upper middle byte of the starting address of the data to be

sent

●Control Change

ccH

Address: lower middle byte of the starting address of the data to be

sent

By selecting

controller number that corresponds to the setting of parameters of

ddH

eeH

Address LSB: lower byte of the starting address of the data to be sent.

controllers (Slider Assign, FC1/2 Pedal Assign), the RD-700GX can transmit any control

change message.

Data: the actual data to be sent. Multiple bytes of data are transmitted

in order starting from the address.

These messages are not transmitted when EXTERNAL Zone Parameter is OFF.

❍Bank Select (Controller number 0, 32)

ffH

sum

F7H

Data

Checksum

Status

BnH

2nd byte

00H

3rd byte

EOX (End Of Exclusive)

mmH

BnH

20H

llH

The amount of data that can be transmitted at one time depends on the type of data, and

data will be transmitted from the specified starting address and size. Refer to the address

and size given in “Parameter Address Map” (p. 9).

n = MIDI channel number:

mm, ll = Bank number:

0H - FH (ch.1 - 16)

00 00H - 7F 7FH (bank.1 - bank.16384)

Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each

packet will be sent at an interval of about 20 ms.

When Rec Mode is ON (EDIT: Utility: Rec Setting: Rec Mode), these messages are

transmitted when Tone is selected.

Regarding the checksum, please refer to p. 14.

❍Modulation (Controller number 1)

Status

BnH

2nd byte

01H

3rd byte

vvH

n = MIDI channel number:

vv = Modulation depth:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

These messages are transmitted when Modulation lever is operated.

❍Portamento Time (Controller number 5)

Status

BnH

2nd byte

05H

3rd byte

vvH

n = MIDI channel number:

vv = Portamento Time:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

These messages are transmitted when Portament Time is set in EXTERNAL Zone.

❍Data Entry (Controller number 6, 38)

Status

BnH

2nd byte

06H

3rd byte

mmH

BnH

26H

llH

n = MIDI channel number:

0H - FH (ch.1 - 16)

mm, ll = the value of the parameter specified by RPN/NRPN

mm = MSB, ll = LSB

❍Volume (Controller number 7)

Status

BnH

2nd byte

07H

3rd byte

vvH

n = MIDI channel number:

vv = Volume:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

These messages are transmitted when ZONE LEVEL Slider is operated.

These messages are transmitted when Volume value is set in EXTERNAL Zone.

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

❍Panpot (Controller number 10)

❍Effect 1 (Reverb Send Level) (Controller number 91)

Status

BnH

2nd byte

0AH

3rd byte

Status

BnH

2nd byte

5BH

3rd byte

vvH

n = MIDI channel number:

vv = Panpot:

0H - FH (ch.1 - 16)

n = MIDI channel number:

vv = Reverb Send Level:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

00H - 40H - 7FH (Left - Center - Right)

These messages are transmitted when Pan value is set in EXTERNAL Zone.

These messages are transmitted when Reverb value is set in EXTERNAL Zone.

❍Hold 1 (Controller number 64)

❍Effect 3 (Chorus Send Level) (Controller number 93)

Status

BnH

2nd byte

40H

3rd byte

Status

BnH

2nd byte

5DH

3rd byte

vvH

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

n = MIDI channel number:

vv = Chorus Send Level:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

These messages are transmitted when Damper pedal is operated.

These messages are transmitted when Chorus value is set in EXTERNAL Zone.

❍Portamento (Controller number 65)

❍RPN MSB/LSB (Controller number 100, 101)

Status

BnH

2nd byte

41H

3rd byte

Status

BnH

2nd byte

65H

3rd byte

mmH

llH

vvH

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

BnH

64H

n = MIDI channel number: 0H - FH (ch.1 - 16)

mm = upper byte (MSB) of parameter number specified by RPN

ll = lower byte (LSB) of parameter number specified by RPN

These messages are transmitted when Portament Swicth is set in EXTERNAL Zone.

❍Sostenuto (Controller number 66)

<<< RPN >>>

Status

BnH

2nd byte

42H

3rd byte

Control Changes include RPN (Registered Parameter Numbers), which are extended.

When using RPNs, first RPN (Controller numbers 100 and 101; they can be sent in any

order) should be sent in order to select the parameter, then Data Entry (Controller numbers

6 and 38) should be sent to set the value. Once RPN messages are received, Data Entry

messages that is received at the same MIDI channel after that are recognized as changing

toward the value of the RPN messages. In order not to make any mistakes, transmitting

RPN Null is recommended after setting parameters you need.

vvH

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

❍Soft (Controller number 67)

Status

BnH

2nd byte

43H

3rd byte

vvH

This device transmits the following RPNs.

n = MIDI channel number:

vv = Control value:

0H - FH (ch.1 - 16)

00H - 7FH (0 - 127)

RPN

Data entry

MSB, LSB

mmH, llH

MSB, LSB

00H, 00H

Notes

Pitch Bend Sensitivity

❍Resonance (Controller number 71)

mm: 00H - 18H (0 - 24 semitones)

ll: ignored (processed as 00H)

Channel Fine Tuning

Status

BnH

2nd byte

47H

3rd byte

vvH

00H, 01H

00H, 02H

00H, 05H

7FH, 7FH

mmH, llH

---, ---

n = MIDI channel number:

0H - FH (ch.1 - 16)

00H - 7FH (-64 - 0 - +63)

mm, ll: 20 00H - 40 00H - 60 00H

(-4096 x 100 / 8192 - 0 - +4096 x 100 / 8192 cent)

Channel Coarse Tuning

vv= Resonance value (relative change):

These messages are transmitted when Resonance value is set in EXTERNAL Zone.

mm: 10H - 40H - 70H (-48 - 0 - +48 semitones)

ll: ignored (processed as 00H)

Modulation Depth Range

❍Release Time (Controller number 72)

Status

BnH

2nd byte

48H

3rd byte

mm, ll: 00 00H - 06 00H

vvH

(0 - 16384 x 600 / 16384 cent)

RPN null

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Release Time value (relative change): 00H - 7FH (-64 - 0 - +63)

These messages are transmitted when Release Time is set in EXTERNAL Zone.

RPN and NRPN will be set as “unspecified.”

Once this setting has been made, subsequent

●Program Change

❍Attack Time (Controller number 73)

Status

2nd byte

Status

BnH

2nd byte

49H

3rd byte

CnH

ppH

vvH

n = MIDI channel number:

pp = Program number:

0H - FH (ch.1 - 16)

n = MIDI channel number:

0H - FH (ch.1 - 16)

00H - 7FH (prog.1 - prog.128)

vv = Attack time value (relative change): 00H - 7FH (-64 - 0 - +63)

These messages are transmitted when Attack Time is set in EXTERNAL Zone.

When Rec Mode is ON (EDIT: Utility: Rec Setting: Rec Mode), these messages are

transmitted when Tone is selected.

❍Cutoff (Controller number 74)

●Pitch Bend Change

Status

BnH

2nd byte

4AH

3rd byte

Status

2nd byte

3rd byte

vvH

EnH

llH

mmH

n = MIDI channel number:

0H - FH (ch.1 - 16)

00H - 7FH (-64 - 0 - +63)

n = MIDI channel number:

mm, ll = Pitch Bend value:

0H - FH (ch.1 - 16)

vv = Cutoff value (relative change):

00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)

These messages are transmitted when Cutoff value is set in EXTERNAL Zone.

❍Decay Time (Controller number 75)

Status

BnH

2nd byte

4BH

3rd byte

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Decay Time value (relative change): 00H - 40H - 7FH (-64 - 0 - +63)

These messages are transmitted when Decay Time value is set in EXTERNAL Zone.

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

●Data Transmission

■Channel Mode Messages

❍Data set 1DT1 (12H)

●MONO (Controller number 126)

Status

F0H

Data byte

Status

2nd byte

3rd byte

41H, dev, 00H, 00H, 2BH, 12H, aaH, bbH, F7H

ccH, ddH, eeH, ... ffH, sum

BnH

7EH

01H

n = MIDI channel number:

0H - FH (ch.1 - 16)

Byte

F0H

41H

dev

Explanation

These messages are transmitted when Mono/Poly value is set to MONO in EXTERNAL

Zone.

Exclusive status

ID number (Roland)

Device ID (dev: 00H - 1FH, Initial value is 10H)

●POLY (Controller number 127)

Status

00H

2BH

12H

aaH

bbH

Model ID #1 (RD-700GX)

2nd byte

3rd byte

Model ID #2 (RD-700GX)

BnH

7FH

00H

Model ID #3 (RD-700GX)

n = MIDI channel number:

0H - FH (ch.1 - 16)

Command ID (DT1)

Address MSB: upper byte of the starting address of the data to be sent

These messages are transmitted when Mono/Poly value is set to POLY in EXTERNAL

Zone.

Address: upper middle byte of the starting address of the data to be

sent

ccH

Address: lower middle byte of the starting address of the data to be

sent

■System Realtime Messages

ddH

eeH

Address LSB: lower byte of the starting address of the data to be sent.

Data: the actual data to be sent. Multiple bytes of data are transmitted

●Timing Clock

Status

in order starting from the address.

F8H

ffH

sum

F7H

Data

Checksum

This message will be transmitted if the Clock Out parameter (EDIT: SYSTEM: Clock Out)

is ON.

EOX (End Of Exclusive)

The amount of data that can be transmitted at one time depends on the type of data, and

data will be transmitted from the specified starting address and size. Refer to the address

and size given in “Parameter Address Map” (p. 9).

●Start

Status

FAH

Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each

packet will be sent at an interval of about 20 ms.

This message is sent on START operation when START/STOP function is selected on

Foot Controller or S1/S2 button.

●Stop

Status

FCH

This message is sent on STOP operation when START/STOP function is selected on Foot

Controller or S1/S2 button.

●Active Sensing

Status

FEH

This message is transmitted at intervals of approximately 250 msec.

■System Exclusive Messages

Universal Non-realtime System Exclusive Message and Data Set 1 (DT1) are the only

System Exclusive messages transmitted by the RD-700GX.

●Universal Non-realtime System Exclusive Message

❍Identity Reply Message

Receiving Identity Request Message, the RD-700GX send this message.

Status

F0H

Data byte

Status

F7H

7EH, dev, 06H, 02H, 41H, 2BH, 02H,

00H, 00H, 00H, 01H, 00H, 00H

Byte

Explanation

F0H

Exclusive status

7EH

ID number (Universal Non-realtime Message)

Device ID (use the same as the device ID of Roland)

Sub ID#1 (General Information)

dev

06H

02H

Sub ID#2 (Identity Reply)

41H

ID number (Roland)

2BH 02H

00H 00H

Device family code (RD-700GX)

Device family number code (RD-700GX)

00H 01H 00H 00H Software revision level

F7H EOX (End of Exclusive)

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

BEND-UP, BEND-DOWN, AFTERTOUCH, |

OCT-UP, OCT-DOWN, START/STOP, |

TAP-TEMPO, RHY PLY/STP, ARPEGGIO SW, |

SNG PLY/STP, AUDIOKEY ON/OFF, |

MFX1 ON/OFF,MFX2 ON/OFF, |

3. Parameter Address Map

Transmission of “#” marked address is divided to some packets. For example, ABH in

hexadecimal notation will be divided to 0AH and 0BH, and is sent/received in this

order.

MFX1 CONTROL, MFX2 CONTROL, |

SETUP-UP, SETUP-DOWN

|-------------+-----------+----------------------------------------------------|

00 12 | 0000 aaaa | System S1 Assign

(0 - 14) |

OFF, COUPLE+1OCT, COUPLE-1OCT, |

COUPLE+2OCT, COUPLE-2OCT, |

COUPLE+5TH, COUPLE-4TH, |

1 RD-700GX (Model ID = 00H 00H 2BH)

OCT-UP, OCT-DOWN, START/STOP, |

TAP-TEMPO, SNG PLY/STP, |

SETUP-UP, SETUP-DOWN, PANEL LOCK

00 13 | 0000 aaaa | System S2 Assign

(0 - 14) |

OFF, COUPLE+1OCT, COUPLE-1OCT, |

DCOUPLE+2OCT, COUPLE-2OCT, |

COUPLE+5TH, COUPLE-4TH, |

❍Indivisual Parameters

These messages are transmitted when Bulk Dump funcion is executed.

Please don’t use a parameter or a address marked <Reserved>.

The parameters for Setup are temporary. If you want to leave the parameters after the

RD-700GX is turned off , execute SETUP Write.

OCT-UP, OCT-DOWN, STADRT/STOP, |

TAP-TEMPO, SNG PLY/STP, |

SETUP-UP, SETUP-DOWN, PANEL LOCK

|-------------+-----------+----------------------------------------------------|

00 14 | 0000 000a | Tone Remain

(0 - 1) |

OFF, ON |

|-------------+----------------------------------------------------------------|

| 00 00 00 15 | Total Size

+------------------------------------------------------------------------------+

* System Sound Control

| Start

+------------------------------------------------------------------------------+

Address |

Description

| Offset

|-------------+----------------------------------------------------------------|

| 00 00 00 00 | System

|-------------+----------------------------------------------------------------|

Address |

Description

|-------------+----------------------------------------------------------------|

00 00 | 0aaa aaaa | Low band Attack time

00 01 | 0aaa aaaa | Low band Release time

00 02 | 00aa aaaa | Low band Threshold

(0 - 100) |

(0 - 36) |

| 10 00 00 00 | Setup (Temporary)

+------------------------------------------------------------------------------+

-36, -35, -34, -33, -32, -31, -30, -29, -28, |

-27, -26, -25, -24, -23, -22, -21, -20, -19, |

-18, -17, -16, -15, -14, -13, -12, -11, -10, |

* System

+------------------------------------------------------------------------------+

| Offset

-9, -8, -7, -6, -5, -4, -3, -2, -1, 0 [dB]

Address |

Description

00 03 | 0000 aaaa | Low band Ratio

(0 - 13) |

|-------------+----------------------------------------------------------------|

1:1.0, 1:1.1, 1:1.2, 1:1.4, 1:1.6, |

1:1.8, 1:2.0, 1:2.5, 1:3.2, 1:4.0, |

00 00 00 | System Common

00 02 00 | System Sound Control

00 03 00 | System Favorite SETUP

00 04 00 | System V-Link

1:5.6, 1:8.0, 1:16, 1:INF

00 04 | 000a aaaa | Low band Level

(0 - 24) |

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, |

10,11,12,13,14,15,16,17,18,19, |

|------------------------------------------------------------------------------+

20,21,22,23,24 [dB]

* SETUP

00 05 | 0aaa aaaa | Mid band Attack time

00 06 | 0aaa aaaa | Mid band Release time

00 07 | 00aa aaaa | Mid band Threshold

(0 - 100) |

(0 - 36) |

+------------------------------------------------------------------------------+

| Offset

Address |

Description

-36, -35, -34, -33, -32, -31, -30, -29, -28, |

-27, -26, -25, -24, -23, -22, -21, -20, -19, |

-18, -17, -16, -15, -14, -13, -12, -11, -10, |

|-------------+----------------------------------------------------------------|

00 00 00 | SETUP Common

00 02 00 | SETUP Rhythm/Arpeggio/AudioKey

-9, -8, -7, -6, -5, -4, -3, -2, -1, 0 [dB]

|-------------+----------------------------------------------------------------|

00 08 | 0000 aaaa | Mid band Ratio

(0 - 13) |

00 03 00 | SETUP Sound Control

00 04 00 | SETUP Chorus

1:1.0, 1:1.1, 1:1.2, 1:1.4, 1:1.6, |

1:1.8, 1:2.0, 1:2.5, 1:3.2, 1:4.0, |

00 06 00 | SETUP Reverb

1:5.6, 1:8.0, 1:16, 1:INF

|-------------+----------------------------------------------------------------|

00 09 | 000a aaaa | Mid band Level

(0 - 24) |

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, |

10,11,12,13,14,15,16,17,18,19, |

00 10 00 | SETUP MFX (UPPER1 MFX1)

00 12 00 | SETUP MFX (UPPER1 MFX2)

20,21,22,23,24 [dB]

00 1E 00 | SETUP MFX (LOWER2 MFX2)

|-------------+----------------------------------------------------------------|

00 0A | 0aaa aaaa | High band Attack time

00 0B | 0aaa aaaa | High band Release time

00 0C | 00aa aaaa | High band Threshold

(0 - 100) |

(0 - 36) |

00 30 00 | SETUP Internal Zone (UPPER1)

00 31 00 | SETUP Internal Zone (UPPER2)

00 32 00 | SETUP Internal Zone (LOWER1)

00 33 00 | SETUP Internal Zone (LOWER2)

00 40 00 | SETUP External Zone (UPPER1)

00 41 00 | SETUP External Zone (UPPER2)

00 42 00 | SETUP External Zone (LOWER1)

00 43 00 | SETUP External Zone (LOWER2)

-36, -35, -34, -33, -32, -31, -30, -29, -28, |

-27, -26, -25, -24, -23, -22, -21, -20, -19, |

-18, -17, -16, -15, -14, -13, -12, -11, -10, |

-9, -8, -7, -6, -5, -4, -3, -2, -1, 0 [dB]

00 0D | 0000 aaaa | High band Ratio

(0 - 13) |

1:1.0, 1:1.1, 1:1.2, 1:1.4, 1:1.6, |

1:1.8, 1:2.0, 1:2.5, 1:3.2, 1:4.0, |

|-------------+----------------------------------------------------------------|

1:5.6, 1:8.0, 1:16, 1:INF

01 00 00 | SETUP Part (Part: 01)

01 01 00 | SETUP Part (Part: 02)

00 0E | 000a aaaa | High band Level

(0 - 24) |

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, |

10,11,12,13,14,15,16,17,18,19, |

01 0F 00 | SETUP Part (Part: 16)

20,21,22,23,24 [dB]

02 00 00 | SETUP Part Piano(Part: 01)

02 20 00 | SETUP Part Piano(Part: 02)

00 0F | 0000 0aaa | Split Freq Low

(0 - 6) |

200, 250, 315, 400, 500, |

630, 800 [Hz]

05 60 00 | SETUP Part Piano(Part: 16)

06 00 00 | SETUP Part E.Piano(Part: 01)

06 01 00 | SETUP Part E.Piano(Part: 02)

00 10 | 0000 0aaa | Split Freq High

(0 - 6) |

2000, 2500, 3150, 4000, 5000, |

6300, 8000 [Hz]

|-------------+----------------------------------------------------------------|

06 0F 00 | SETUP Part E.Piano(Part: 16)

07 00 00 | SETUP Part ToneWheel(Part: 01)

07 01 00 | SETUP Part ToneWheel(Part: 02)

| 00 00 00 11 | Total Size

+------------------------------------------------------------------------------+

* System Favorite SETUP

+------------------------------------------------------------------------------+

07 0F 00 | SETUP Part ToneWheel(Part: 16)

+------------------------------------------------------------------------------+

| Offset

Address |

Description

* System Common

|-------------+----------------------------------------------------------------|

+------------------------------------------------------------------------------+

00 00 | 0aaa aaaa | Favorite SETUP0 (Bank A)

00 01 | 0aaa aaaa | Favorite SETUP1 (Bank A)

00 02 | 0aaa aaaa | Favorite SETUP2 (Bank A)

00 03 | 0aaa aaaa | Favorite SETUP3 (Bank A)

00 04 | 0aaa aaaa | Favorite SETUP4 (Bank A)

00 05 | 0aaa aaaa | Favorite SETUP5 (Bank A)

00 06 | 0aaa aaaa | Favorite SETUP6 (Bank A)

00 07 | 0aaa aaaa | Favorite SETUP7 (Bank A)

00 08 | 0aaa aaaa | Favorite SETUP8 (Bank A)

00 09 | 0aaa aaaa | Favorite SETUP9 (Bank A)

(0 - 100) |

| Offset

Address |

Description

|-------------+----------------------------------------------------------------|

00 00 | 0000 aaaa |

| 0000 bbbb |

| 0000 cccc |

| 0000 dddd | Master Tune

(24 - 2024) |

-100.0 - 100.0 [cent]

00 04 | 0aaa aaaa | Master Level

(0 - 127) |

|-------------+-----------+----------------------------------------------------|

00 05 | 000a aaaa | SETUP Control Channel

(0 - 16) |

1 - 16, OFF |

00 0A | 0aaa aaaa | Favorite SETUP0 (Bank B)

00 0B | 0aaa aaaa | Favorite SETUP1 (Bank B)

00 0C | 0aaa aaaa | Favorite SETUP2 (Bank B)

00 0D | 0aaa aaaa | Favorite SETUP3 (Bank B)

00 0E | 0aaa aaaa | Favorite SETUP4 (Bank B)

00 0F | 0aaa aaaa | Favorite SETUP5 (Bank B)

00 10 | 0aaa aaaa | Favorite SETUP6 (Bank B)

00 11 | 0aaa aaaa | Favorite SETUP7 (Bank B)

00 12 | 0aaa aaaa | Favorite SETUP8 (Bank B)

00 13 | 0aaa aaaa | Favorite SETUP9 (Bank B)

(0 - 100) |

|-------------+-----------+----------------------------------------------------|

00 06 | 0000 000a | Clock Source

(0 - 1) |

INT, MIDI

00 07 | 0000 000a | Clock Out

(0 - 1) |

OFF, ON

|-------------+-----------+----------------------------------------------------|

00 08 | 0000 000a | Damper Polarity

(0 - 1) |

STANDARD, REVERSE

00 09 | 0000 000a | FC1 Polarity

(0 - 1) |

STANDARD, REVERSE

00 14 | 0aaa aaaa | Favorite SETUP0 (Bank C)

00 15 | 0aaa aaaa | Favorite SETUP1 (Bank C)

00 16 | 0aaa aaaa | Favorite SETUP2 (Bank C)

00 17 | 0aaa aaaa | Favorite SETUP3 (Bank C)

00 18 | 0aaa aaaa | Favorite SETUP4 (Bank C)

00 19 | 0aaa aaaa | Favorite SETUP5 (Bank C)

00 1A | 0aaa aaaa | Favorite SETUP6 (Bank C)

00 1B | 0aaa aaaa | Favorite SETUP7 (Bank C)

00 1B | 0aaa aaaa | Favorite SETUP8 (Bank C)

00 1D | 0aaa aaaa | Favorite SETUP9 (Bank C)

(0 - 100) |

00 0A | 0000 000a | FC2 Polarity

(0 - 1) |

STANDARD, REVERSE

|-------------+-----------+----------------------------------------------------|

00 0B | 0000 000a | EQ Mode

(0 - 1) |

SETUP, SYSTEM

00 0C | 0000 000a | SoundControl Mode

(0 - 1) |

SETUP, SYSTEM

|-------------+-----------+----------------------------------------------------|

00 0D | 0000 000a | Pedal Mode

(0 - 1) |

SETUP, SYSTEM |

|-------------+-----------+----------------------------------------------------|

00 1E | 0aaa aaaa | Favorite SETUP0 (Bank D)

00 1F | 0aaa aaaa | Favorite SETUP1 (Bank D)

00 20 | 0aaa aaaa | Favorite SETUP2 (Bank D)

00 21 | 0aaa aaaa | Favorite SETUP3 (Bank D)

00 22 | 0aaa aaaa | Favorite SETUP4 (Bank D)

00 23 | 0aaa aaaa | Favorite SETUP5 (Bank D)

00 24 | 0aaa aaaa | Favorite SETUP6 (Bank D)

00 25 | 0aaa aaaa | Favorite SETUP7 (Bank D)

00 26 | 0aaa aaaa | Favorite SETUP8 (Bank D)

00 27 | 0aaa aaaa | Favorite SETUP9 (Bank D)

(0 - 100) |

00 0E | 0000 000a | S1S2 Mode

(0 - 1) |

SETUP, SYSTEM |

|-------------+-----------+----------------------------------------------------|

00 0F | 0aaa aaaa | Audio Level

(0 - 127) |

0-127 |

|-------------+-----------+----------------------------------------------------|

00 10 | 0aaa aaaa | System FC1 Assign

(0 - 111) |

OFF, CC01 - CC31, CC33 - CC95, |

BEND-UP, BEND-DOWN, AFTERTOUCH, |

OCT-UP, OCT-DOWN, START/STOP, |

TAP-TEMPO, RHY PLY/STP, ARPEGGIO SW, |

SNG PLY/STP, AUDIOKEY ON/OFF, |

MFX1 ON/OFF,MFX2 ON/OFF, |

|-------------+----------------------------------------------------------------|

| 00 00 00 28 | Total Size

+------------------------------------------------------------------------------+

MFX1 CONTROL, MFX2 CONTROL, |

SETUP-UP, SETUP-DOWN

00 11 | 0aaa aaaa | System FC2 Assign

(0 - 111) |

OFF, CC01 - CC31, CC33 - CC95, |

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

* System V-Link

MFX1 ON/OFF, MFX2 ON/OFF, |

MFX1 CONTROL, MFX2 CONTROL |

+------------------------------------------------------------------------------+

| Offset

|-------------+-----------+----------------------------------------------------|

Address |

Description

01 19 | 0000 00aa | MFX Knob1 Assgin

(0 - 2) |

|-------------+----------------------------------------------------------------|

OFF, MFX1, TEMPO

00 00 | 0000 000a | Switch

(0 - 1) |

OFF,ON

(0 - 1) |

(0 - 127) |

(0 - 15) |

(0 - 4) |

01 1A | 0000 00aa | MFX Knob2 Assgin

(0 - 2) |

OFF, MFX2, TEMPO, |

00 01 | 0000 000a | Mode

01 1B | 0000 aaaa | S1 Assign

(0 - 11) |

BANK/PC.NOTE

OFF, COUPLE+1OCT, COUPLE-1OCT, |

COUPLE+2OCT, COUPLE-2OCT, |

COUPLE+5TH, COUPLE-4TH, |

OCT-UP, OCT-DOWN, START/STOP, |

00 02 | 0aaa aaaa | Lowest No

00 03 | 0000 aaaa | Transmit Channel

00 04 | 0000 0aaa | Output Port

ALL, OUT1, OUT2, OUT3, USB

(0 - 87) |

(0 - 1) |

TAP-TEMPO, SNG PLY/STP

00 05 | 0aaa aaaa | Key Range Lower

00 06 | 0aaa aaaa | Key Range Upper

00 07 | 0000 000a | Local Control

01 1C | 0000 aaaa | S2 Assign

(0 - 11) |

OFF, COUPLE+1OCT, COUPLE-1OCT, |

COUPLE+2OCT, COUPLE-2OCT, |

COUPLE+5TH, COUPLE-4TH, |

OFF, ON

|-------------+----------------------------------------------------------------|

OCT-UP, OCT-DOWN, START/STOP, |

| 00 00 00 08 | Total Size

+------------------------------------------------------------------------------+

TAP-TEMPO, SNG PLY/STP

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON |

01 1D | 0000 000a | S1 State

* SETUP Common

01 1E | 0000 000a | S2 State

+------------------------------------------------------------------------------+

| Offset

|-------------+-----------+----------------------------------------------------|

01 1F | 0000 000a | EQ Switch (0 - 1) |

OFF, ON |

Address |

Description

|-------------+----------------------------------------------------------------|

00 00 | 0aaa aaaa | SETUP Name 1

(32 - 127) |

32 - 127 [ASCII]

01 20 | 000a aaaa | EQ Input Gain

(0 - 30) |

-15 - +15[dB]

00 01 | 0aaa aaaa | SETUP Name 2

00 02 | 0aaa aaaa | SETUP Name 3

00 03 | 0aaa aaaa | SETUP Name 4

00 04 | 0aaa aaaa | SETUP Name 5

00 05 | 0aaa aaaa | SETUP Name 6

00 06 | 0aaa aaaa | SETUP Name 7

00 07 | 0aaa aaaa | SETUP Name 8

00 08 | 0aaa aaaa | SETUP Name 9

00 09 | 0aaa aaaa | SETUP Name 10

00 0A | 0aaa aaaa | SETUP Name 11

00 0B | 0aaa aaaa | SETUP Name 12

(32 - 127) |

01 21 | 0000 000a | EQ Low Type

(0 - 1) |

Shelving, Peaking

01 22 | 000a aaaa | EQ Low Frequency

(0 - 30) |

16,20,25,31,40,50,63,80,100,125,160, |

200.250,315,400,500,630,800,1000, |

1250,1600,2000,2500,3150,4000,5000, |

6300,8000,10000,12500,16000,[Hz]

01 23 | 0aaa aaaa | EQ Low Gain

(4 - 124) |

-12.0 - +12.0[dB] (1step = 0.2dB)

01 24 | 0000 0aaa | EQ Low Q

(0 - 4) |

0.5, 1.0, 2.0, 4.0, 8.0

|-------------+-----------+----------------------------------------------------|

01 25 | 000a aaaa | EQ Mid Frequency

(0 - 30) |

00 0C | 0aaa aaaa | Voice Reserve 1

(0 - 64) |

16,20,25,31,40,50,63,80,100,125,160, |

200.250,315,400,500,630,800,1000, |

1250,1600,2000,2500,3150,4000,5000, |

0 - 63, FULL

(0 - 64) |

00 0D | 0aaa aaaa | Voice Reserve 2

00 0E | 0aaa aaaa | Voice Reserve 3

00 0F | 0aaa aaaa | Voice Reserve 4

00 10 | 0aaa aaaa | Voice Reserve 5

00 11 | 0aaa aaaa | Voice Reserve 6

00 12 | 0aaa aaaa | Voice Reserve 7

00 13 | 0aaa aaaa | Voice Reserve 8

00 14 | 0aaa aaaa | Voice Reserve 9

00 15 | 0aaa aaaa | Voice Reserve 10

00 16 | 0aaa aaaa | Voice Reserve 11

00 17 | 0aaa aaaa | Voice Reserve 12

00 18 | 0aaa aaaa | Voice Reserve 13

00 19 | 0aaa aaaa | Voice Reserve 14

00 1A | 0aaa aaaa | Voice Reserve 15

00 1B | 0aaa aaaa | Voice Reserve 16

6300,8000,10000,12500,16000,[Hz]

01 26 | 0aaa aaaa | EQ Mid Gain

(4 - 124) |

-12.0 - +12.0[dB] (1step = 0.2dB)

01 27 | 0000 0aaa | EQ Mid Q

(0 - 4) |

0.5, 1.0, 2.0, 4.0, 8.0

01 28 | 000a aaaa | EQ Mid Frequency

(0 - 30) |

16,20,25,31,40,50,63,80,100,125,160, |

200.250,315,400,500,630,800,1000, |

1250,1600,2000,2500,3150,4000,5000, |

6300,8000,10000,12500,16000,[Hz]

01 29 | 0aaa aaaa | EQ Mid Gain

(4 - 124) |

-12.0 - +12.0[dB] (1step = 0.2dB)

01 2A | 0000 0aaa | EQ Mid Q

(0 - 4) |

0.5, 1.0, 2.0, 4.0, 8.0

|-------------+-----------+----------------------------------------------------|

01 2B | 0000 000a | EQ High Type

(0 - 1) |

00 1C | 0000 000a |

| 0000 bbbb |

Shelving, Peaking

01 2C | 000a aaaa | EQ High Frequency

(0 - 30) |

| 0000 cccc | SETUP Tempo

(10 - 500) |

16,20,25,31,40,50,63,80,100,125,160, |

200.250,315,400,500,630,800,1000, |

1250,1600,2000,2500,3150,4000,5000, |

|-------------+-----------+----------------------------------------------------|

00 1F | 0000 000a |

| 0000 bbbb |

6300,8000,10000,12500,16000,[Hz]

| 0000 cccc | Upper [Piano] Tone Category

(0 - 511) |

01 2D | 0aaa aaaa | EQ High Gain

(4 - 124) |

00 22 | 0000 000a |

| 0000 bbbb |

-12.0 - +12.0[dB] (1step = 0.2dB)

01 2E | 0000 0aaa | EQ High Q

(0 - 4) |

0.5, 1.0, 2.0, 4.0, 8.0

| 0000 cccc | Upper [E.Piano] Tone Category

(0 - 511) |

00 25 | 0000 000a |

| 0000 bbbb |

|-------------+-----------+----------------------------------------------------|

01 2F | 0aaa aaaa | Key Touch Velocity

(0 - 127) |

| 0000 cccc | Upper [CLAV/MALLET] Tone Category

(0 - 511) |

REAL, 1 - 127

00 28 | 0000 000a |

| 0000 bbbb |

01 30 | 0000 0aaa | Key Touch Curve Type

(1 - 5) |

SUPER LIGHT, LIGHT, |

| 0000 cccc | Upper [ORGAN] Tone Category

(0 - 511) |

MEDIUM, HEAVY, SUPER HEAVY

00 2B | 0000 000a |

| 0000 bbbb |

01 31 | 000a aaaa | Key Touch Curve offset

(54 - 73) |

-10 - +9

(1 - 127) |

-63 - +63

(1 - 127) |

-63 - +63

(0 - 1) |

MODE1, MODE2 |

| 0000 cccc | Upper [STRINGS] Tone Category

(0 - 511) |

01 32 | 0aaa aaaa | Key Touch Velocity Delay Sens

00 2E | 0000 000a |

| 0000 bbbb |

01 33 | 0aaa aaaa | Key Touch Velocity Key Follow

| 0000 cccc | Upper [PAD] Tone Category

(0 - 511) |

00 31 | 0000 000a |

| 0000 bbbb |

01 34 | 0000 000a | Key Touch Mode

| 0000 cccc | Upper [GUITAR/BASS] Tone Category

(0 - 511) |

|-------------+-----------+----------------------------------------------------|

00 34 | 0000 000a |

| 0000 bbbb |

01 35 | 0000 000a | Slider Select

(0 - 1) |

ZONE LEVEL, CONTROL

| 0000 cccc | Upper [BRASS/WINDS] Tone Category

(0 - 511) |

01 36 | 0aaa aaaa | Slider Assign (UPPER1)

(0 - 97) |

00 37 | 0000 000a |

| 0000 bbbb |

OFF, CC01 - CC31, CC33 - CC95, |

BEND-UP, BEND-DOWN, AFTERTOUCH, |

| 0000 cccc | Upper [VOICE/SYNTH] Tone Category

(0 - 511) |

01 37 | 0aaa aaaa | Slider Assign (UPPER2)

01 38 | 0aaa aaaa | Slider Assign (LOWER1)

01 39 | 0aaa aaaa | Slider Assign (LOWER2)

(0 - 97) |

00 3A | 0000 000a |

| 0000 bbbb |

| 0000 cccc | Upper [RHY/GM2] Tone Category

(0 - 511) |

|-------------+-----------+----------------------------------------------------|

01 3B | 0000 000a | Split Switch (Internal)

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON |

00 5B | 0000 000a |

| 0000 bbbb |

01 3C | 0000 000a | Split Switch (External)

| 0000 cccc | Lower [Piano] Tone Category

(0 - 511) |

00 5E | 0000 000a |

| 0000 bbbb |

|-------------+-----------+----------------------------------------------------|

01 3D | 0000 00aa | MFX Source

(0 - 3) |

| 0000 cccc | Lower [E.Piano] Tone Category

(0 - 511) |

UPPER1,UPPER2,LOWER1,LOWER2

00 61 | 0000 000a |

| 0000 bbbb |

01 3E | 0000 00aa | MFX Destination

(0 - 2) |

NORMAL, SAME MFX PART, ALL PART

| 0000 cccc | Lower [CLAV/MALLET] Tone Category

(0 - 511) |

|-------------+-----------+----------------------------------------------------|

00 64 | 0000 000a |

| 0000 bbbb |

01 3F | 0000 000a | Reverb Switch

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON |

| 0000 cccc | Lower [ORGAN] Tone Category

(0 - 511) |

01 40 | 0000 000a | Chorus Switch

00 67 | 0000 000a |

| 0000 bbbb |

|-------------+-----------+----------------------------------------------------|

| 0000 cccc | Lower [STRINGS] Tone Category

(0 - 511) |

01 41 | 0000 aaaa | Harmonic Bar Assign (LOWER2:ON)

(1 - 9) |

00 6A | 0000 000a |

| 0000 bbbb |

16',5-1/3',8',4',2-2/3',1-3/5',2',1-1/3',1'

(1 - 9) |

01 42 | 0000 aaaa | Harmonic Bar Assign (LOWER2:OFF)

01 43 | 0000 aaaa | Harmonic Bar Assign (LOWER1:ON)

01 44 | 0000 aaaa | Harmonic Bar Assign (LOWER1:OFF)

01 45 | 0000 aaaa | Harmonic Bar Assign (UPPER2:ON)

01 46 | 0000 aaaa | Harmonic Bar Assign (UPPER2:OFF)

01 47 | 0000 aaaa | Harmonic Bar Assign (UPPER1:ON)

01 48 | 0000 aaaa | Harmonic Bar Assign (UPPER1:OFF)

| 0000 cccc | Lower [PAD] Tone Category

(0 - 511) |

00 6D | 0000 000a |

| 0000 bbbb |

| 0000 cccc | Lower [GUITAR/BASS] Tone Category

(0 - 511) |

00 70 | 0000 000a |

| 0000 bbbb |

| 0000 cccc | Lower [BRASS/WINDS] Tone Category

(0 - 511) |

|-------------+-----------+----------------------------------------------------|

00 73 | 0000 000a |

| 0000 bbbb |

01 49 | 0000 000a | V-Link Switch

(0 - 1) |

OFF,ON |

| 0000 cccc | Lower [VOICE/SYNTH] Tone Category

(0 - 511) |

|-------------+-----------+----------------------------------------------------|

00 76 | 0000 000a |

| 0000 bbbb |

01 4A | 0000 00aa | Current Control Zone

(0 - 3) |

UPPER1,UPPER2,LOWER1,LOWER2 |

| 0000 cccc | Lower [RHY/GM2] Tone Category

(0 - 511) |

|-------------+----------------------------------------------------------------|

|-------------+-----------+----------------------------------------------------|

| 00 00 01 4D | Total Size

+------------------------------------------------------------------------------+

01 17 | 0aaa aaaa | FC 1 Assign

(0 - 109) |

OFF, CC01 - CC31, CC33 - CC95, |

BEND-UP, BEND-DOWN, AFTERTOUCH, |

OCT-UP, OCT-DOWN, START/STOP, |

TAP-TEMPO, RHY PLY/STP, ARPEGGIO SW, |

AUDIOKEY ON/OFF,SNG PLY/STP, |

MFX1 ON/OFF, MFX2 ON/OFF, |

MFX1 CONTROL, MFX2 CONTROL |

01 18 | 0aaa aaaa | FC 2 Assign

(0 - 109) |

OFF, CC01 - CC31, CC33 - CC95, |

BEND-UP, BEND-DOWN, AFTERTOUCH, |

OCT-UP, OCT-DOWN, START/STOP, |

TAP-TEMPO, RHY PLY/STP, ARPEGGIO SW, |

AUDIOKEY ON/OFF,SNG PLY/STP, |

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

* SETUP Rhythm/Arpeggio

* SETUP MFX

+------------------------------------------------------------------------------+

| Offset

Address |

Description

Address |

Description

|-------------+----------------------------------------------------------------|

00 00 | 0000 aaaa |

(0 - 199) |

(0 - 100) |

(0 - 1) |

00 02 | 0000 aaaa |

| 0000 bbbb | MFX Type

| 0000 bbbb | Rhythm Pattern

(0 - 255) |

00 02 | 0aaa aaaa | Rhythm Accent

|-------------+-----------+----------------------------------------------------|

00 03 | 0000 000a | Rhythm Set Change Enable

00 04 | 000a aaaa | Rhythm MIDI Out Channel

00 10 | 0000 aaaa |

|MFX Parameter 1-32

01 0C | 0000 aaaa |

(0 - 16) |

(12768 - 52768) |

OFF,1-16

-20000 - +20000

00 05 | 0000 0aaa | Rhythm Output Port

(0 - 5) |

ALL, INT, OUT1, OUT2, OUT3, USB |

|-------------+-----------+----------------------------------------------------|

| 00 00 01 10 | Total Size

|-------------+-----------+----------------------------------------------------|

+------------------------------------------------------------------------------+

00 06 | 0000 0aaa | Arpeggio Zone

(0 - 4) |

ALL,UPPER1,UPPER2,LOWER1,LOWER2

* SETUP Internal Zone

+------------------------------------------------------------------------------+

00 07 | 0000 000a | Arpeggio Switch

(0 - 1) |

OFF,ON

| Offset

00 08 | 0aaa aaaa | Arpeggio Style

00 09 | 0000 aaaa | Arpeggio Motif

(0 - 149) |

(0 - 11) |

Address |

Description

|-------------+----------------------------------------------------------------|

UP(L),UP(H&L).UP(_),DOWN(L),DOWN(L&H), |

DOWN_,UP&DOWN(L),UP&DOWN(L&H),UP&DOWN(_), |

00 00 | 0aaa aaaa | Keyboard Range Lower

(0 - 87) |

A0 - UPPER

RANDOM(L),RANDOM(_),RHASE

(0 - 100) |

0 - 100% |

00 01 | 0aaa aaaa | Keyboard Range Upper

(0 - 87) |

00 0A | 0aaa aaaa | Arpeggio Accent

LOWER - C8

|-------------+-----------+----------------------------------------------------|

00 0B | 0aaa aaaa | Arpeggio Velocity

(0 - 127) |

00 02 | 0aaa aaaa | Velocity Range Lower

00 03 | 0aaa aaaa | Velocity Range Upper

(1 - 127) |

REAL,1 - 127

00 0C | 0000 0aaa | Arpeggio Octave Range

(61 - 67) |

|-------------+-----------+----------------------------------------------------|

-3 - +3

00 04 | 0aaa aaaa | Velocity Sensitivity

(1 - 127) |

-63 - +63

(1 - 127) |

00 0D | 0000 000a | Arpeggio Hold

(0 - 1) |

OFF,ON |

00 05 | 0aaa aaaa | Velocity Max

00 0E | 0aaa aaaa | Key Range Lower

00 0F | 0aaa aaaa | Key Range Upper

00 10 | 0000 aaaa | Rhythm Arpeggio Grid

(0 - 87) |

|-------------+-----------+----------------------------------------------------|

00 06 | 0aaa aaaa | keyboard Transpose

(16 - 112) |

-48 - +48 |

(0 - 8) |

1/4, 1/8, 1/8L, 1/8H, 1/12, |

|-------------+-----------+----------------------------------------------------|

1/16, 1/16L, 1/16H, 1/24

00 07 | 0000 000a | Zone Switch

(0 - 1) |

OFF, ON |

00 11 | 0000 aaaa | Rhythm Arpeggio Duration

30, 40, 50, 60, 70, 80, 90, 100, 120, FULL

|-------------+----------------------------------------------------------------|

(0 - 9) |

|-------------+-----------+----------------------------------------------------|

00 08 | 0000 000a | Damper Switch (0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 15) |

1 - 16

| 00 00 00 12 | Total Size

+------------------------------------------------------------------------------+

00 09 | 0000 000a | FC1 Switch

* Setup Sound Control

+------------------------------------------------------------------------------+

00 0A | 0000 000a | FC2 Switch

| Offset

00 0B | 0000 000a | Modulation Switch

Address |

Description

|-------------+----------------------------------------------------------------|

00 00 | 0000 000a | SoundControl Switch (0 - 1) |

OFF,ON |

00 0C | 0000 000a | Bender Switch

00 0D | 0000 000a | Control Slider Swtch (UPPER1)

00 01 | 0aaa aaaa | Low band Attack time

00 02 | 0aaa aaaa | Low band Release time

00 03 | 00aa aaaa | Low band Threshold

(0 - 100) |

(0 - 36) |

00 0E | 0000 000a | Control Slider Swtch (UPPER2)

-36, -35, -34, -33, -32, -31, -30, -29, -28, |

-27, -26, -25, -24, -23, -22, -21, -20, -19, |

-18, -17, -16, -15, -14, -13, -12, -11, -10, |

00 0F | 0000 000a | Control Slider Swtch (LOWER1)

-9, -8, -7, -6, -5, -4, -3, -2, -1, 0 [dB]

00 10 | 0000 000a | Control Slider Swtch (LOWER2)

00 04 | 0000 aaaa | Low band Ratio

(0 - 13) |

1:1.0, 1:1.1, 1:1.2, 1:1.4, 1:1.6, |

1:1.8, 1:2.0, 1:2.5, 1:3.2, 1:4.0, |

00 11 | 0000 000a | S1 Switch

1:5.6, 1:8.0, 1:16, 1:INF

00 12 | 0000 000a | S2 Switch

00 05 | 000a aaaa | Low band Level

(0 - 24) |

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, |

10,11,12,13,14,15,16,17,18,19, |

00 14 | 0000 aaaa | Part Assign

20,21,22,23,24 [dB]

|-------------+-----------+----------------------------------------------------|

|-------------+----------------------------------------------------------------|

| 00 00 00 15 | Total Size

+------------------------------------------------------------------------------+

00 06 | 0aaa aaaa | Mid band Attack time

00 07 | 0aaa aaaa | Mid band Release time

00 08 | 00aa aaaa | Mid band Threshold

(0 - 100) |

(0 - 36) |

-36, -35, -34, -33, -32, -31, -30, -29, -28, |

-27, -26, -25, -24, -23, -22, -21, -20, -19, |

-18, -17, -16, -15, -14, -13, -12, -11, -10, |

* SETUP External Zone

+------------------------------------------------------------------------------+

-9, -8, -7, -6, -5, -4, -3, -2, -1, 0 [dB]

| Offset

00 09 | 0000 aaaa | Mid band Ratio

(0 - 13) |

Address |

Description

1:1.0, 1:1.1, 1:1.2, 1:1.4, 1:1.6, |

1:1.8, 1:2.0, 1:2.5, 1:3.2, 1:4.0, |

|-------------+----------------------------------------------------------------|

00 00 | 0aaa aaaa | Keyboard Range Lower

(0 - 87) |

1:5.6, 1:8.0, 1:16, 1:INF

A0 - UPPER

00 0A | 000a aaaa | Mid band Level

(0 - 24) |

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, |

10,11,12,13,14,15,16,17,18,19, |

00 01 | 0aaa aaaa | Keyboard Range Upper

(0 - 87) |

LOWER - C8

|-------------+-----------+----------------------------------------------------|

20,21,22,23,24 [dB]

00 02 | 0aaa aaaa | Velocity Range Lower

(1 - 127) |

00 0B | 0aaa aaaa | High band Attack time

00 0C | 0aaa aaaa | High band Release time

00 0D | 00aa aaaa | High band Threshold

(0 - 100) |

(0 - 36) |

(1 - 127) |

00 03 | 0aaa aaaa | Velocity Range Upper

-36, -35, -34, -33, -32, -31, -30, -29, -28, |

-27, -26, -25, -24, -23, -22, -21, -20, -19, |

-18, -17, -16, -15, -14, -13, -12, -11, -10, |

|-------------+-----------+----------------------------------------------------|

00 04 | 0aaa aaaa | Velocity Sensitivity

(1 - 127) |

-63 - +63

(1 - 127) |

-9, -8, -7, -6, -5, -4, -3, -2, -1, 0 [dB]

00 05 | 0aaa aaaa | Velocity Max

00 0E | 0000 aaaa | High band Ratio

(0 - 13) |

|-------------+-----------+----------------------------------------------------|

1:1.0, 1:1.1, 1:1.2, 1:1.4, 1:1.6, |

1:1.8, 1:2.0, 1:2.5, 1:3.2, 1:4.0, |

00 06 | 0aaa aaaa | keyboard Transpose

(16 - 112) |

-48 - +48 |

1:5.6, 1:8.0, 1:16, 1:INF

|-------------+-----------+----------------------------------------------------|

00 0F | 000a aaaa | High band Level

(0 - 24) |

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, |

10,11,12,13,14,15,16,17,18,19, |

00 07 | 0000 000a | Zone Switch

(0 - 1) |

OFF, ON |

|-------------+-----------+----------------------------------------------------|

00 08 | 0000 000a | Damper Switch (0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 4) |

ALL, OUT1, OUT2, OUT3, USB

|-------------+-----------+----------------------------------------------------|

20,21,22,23,24 [dB]

00 10 | 0000 0aaa | Split Freq Low

(0 - 6) |

200, 250, 315, 400, 500, |

00 09 | 0000 000a | FC1 Switch

630, 800 [Hz]

00 11 | 0000 0aaa | Split Freq High

(0 - 6) |

00 0A | 0000 000a | FC2 Switch

2000, 2500, 3150, 4000, 5000, |

6300, 8000 [Hz]

00 0B | 0000 000a | Modulation Switch

|-------------+----------------------------------------------------------------|

| 00 00 00 12 | Total Size

+------------------------------------------------------------------------------+

00 0C | 0000 000a | Bender Switch

* SETUP Chorus

00 0D | 0000 000a | Control Switch (MFX)

+------------------------------------------------------------------------------+

| Offset

00 0E | 0000 000a | Control Slider Switch (UPPER1)

Address |

Description

|-------------+----------------------------------------------------------------|

00 0F | 0000 000a | Control Slider Switch (UPPER2)

00 00 | 0000 aaaa | Chorus Type

(0 - 3) |

OFF, CHORUS, DELAY, GM2 CHORUS

00 10 | 0000 000a | Control Slider Switch (LOWER1)

00 01 | 0aaa aaaa | Chorus Level

00 02 | 0000 00aa |

(0 - 127) |

(reserved)

00 11 | 0000 000a | Control Slider Switch (LOWER2)

00 03 | 0000 00aa | Chorus Output Select

(0 - 2) |

MAIN, REV, MAIN+REV |

00 12 | 0000 0aaa | Transmit Port

|-------------+-----------+----------------------------------------------------|

00 04 | 0000 aaaa |

| Chorus Parameter 1-20

00 50 | 0000 aaaa |

(12768 - 52768) |

00 13 | 0000 aaaa | Transmit Channel

(0 - 15) |

1 - 16

(0 - 1) |

OFF, ON |

-20000 - +20000

|-------------+----------------------------------------------------------------|

00 14 | 0000 000a | Transmit Bank Select MSB Switch

| 00 00 00 54 | Total Size

+------------------------------------------------------------------------------+

00 15 | 0aaa aaaa | Transmit Bank Select MSB (CC# 0)

00 16 | 0000 000a | Transmit Bank Select LSB Switch

(0 - 127) |

(0 - 1) |

* SETUP Reverb

OFF, ON

+------------------------------------------------------------------------------+

00 17 | 0aaa aaaa | Transmit Bank Select LSB (CC# 32)

00 18 | 0000 000a | Transmit Program Change Switch

(0 - 127) |

(0 - 1) |

| Offset

Address |

Description

OFF, ON

|-------------+----------------------------------------------------------------|

00 19 | 0aaa aaaa | Transmit Program Change#

(0 - 127) |

00 00 | 0000 aaaa | Reverb Type

(0 - 6) |

|-------------+-----------+----------------------------------------------------|

OFF, REVERB, SRV ROOM, SRV HALL, |

00 1A | 0000 000a | Transmit Level Switch

(0 - 1) |

OFF, ON

(0 - 127) |

SRV PLATE, GM2 REVERB, CATHEDRAL

00 01 | 0aaa aaaa | Reverb Level

|-------------+-----------+----------------------------------------------------|

(0 - 127) |

00 1B | 0aaa aaaa | Transmit Level (CC# 7)

|-------------+-----------+----------------------------------------------------|

00 03 | 0000 aaaa |

| Reverb Parameter 1-20

00 4F | 0000 aaaa |

00 1C | 0000 000a | Transmit Pan Switch

(0 - 1) |

OFF, ON

(0 - 127) |

L64 - R63 |

(12768 - 52768) |

-20000 - +20000

00 1D | 0aaa aaaa | Transmit Pan(CC# 10)

|-------------+----------------------------------------------------------------|

| 00 00 00 53 | Total Size

|-------------+-----------+----------------------------------------------------|

+------------------------------------------------------------------------------+

00 1E | 0000 000a | Transmit Coarse Tune Switch

(0 - 1) |

OFF, ON |

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

00 1F | 0aaa aaaa | Transmit Coarse Tune

(16 - 112) |

-48 - +48

OFF, ON

00 1F | 0000 000a | Receive Volume Switch

(0 - 1) |

|-------------+-----------+----------------------------------------------------|

OFF, ON

00 20 | 0000 000a | Transmit Fine Tune Switch

(0 - 1) |

OFF, ON

(14 - 114) |

-50 - +50

00 20 | 0000 000a | Receive Pan Switch

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON |

00 21 | 0aaa aaaa | Transmit Fine Tune

00 21 | 0000 000a | Receive Hold-1 Switch

|-------------+-----------+----------------------------------------------------|

00 22 | 0000 000a | Receive Expression

00 22 | 0000 000a | Transmit Mono/Poly Switch

(0 - 1) |

OFF, ON

(0 - 1) |

MONO, POLY

|-------------+----------------------------------------------------------------|

00 23 | 0000 00aa | Transmit Mono/Poly

| 00 00 00 23 | Total Size

+------------------------------------------------------------------------------+

|-------------+-----------+----------------------------------------------------|

00 24 | 0000 000a | Transmit Portamento Switch

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

* Setup Piano Setting

+------------------------------------------------------------------------------+

00 25 | 0000 000a | Transmit Portamento Switch Value

| Offset

Address |

Description

|-------------+-----------+----------------------------------------------------|

|-------------+----------------------------------------------------------------|

00 26 | 0000 000a | Transmit Portamento Time Switch

(0 - 1) |

OFF, ON

(0 - 127) |

00 00 | 000a aaaa | Tone Number

00 01 | 00aa aaaa | Stereo Width

00 02 | 0000 00aa | Nuance

(0 - 25) |

(0 - 63) |

(0 - 2) |

00 27 | 0aaa aaaa | Transmit Portamento Time

|-------------+-----------+----------------------------------------------------|

TYPE1, TYPE2, TYPE3

(0 - 127) |

(62 - 66) |

00 28 | 0000 000a | Transmit Cutoff Switch

(0 - 1) |

OFF, ON

(0 - 127) |

-64 - +63

00 03 | 0aaa aaaa | Duplex Scale Level

00 04 | 0000 0aaa | Hammer Noise Level

00 29 | 0aaa aaaa | Transmit Cutoff

-2 - 2

00 05 | 0aaa aaaa | Damper Noise Level

00 06 | 0aaa aaaa | String Resonance Level

00 07 | 0aaa aaaa | KeyOffSound Level

00 08 | 0aaa aaaa | Velocity Gain Squeeze

00 09 | 0000 000a | Stretch Tune

(0 - 127) |

(0 - 1) |

|-------------+-----------+----------------------------------------------------|

00 2A | 0000 000a | Transmit Resonance Switch

(0 - 1) |

OFF, ON

(0 - 127) |

-64 - +63

00 2B | 0aaa aaaa | Transmit Resonance

OFF,Default

|-------------+-----------+----------------------------------------------------|

00 0A | 0000 aaaa | Micro Tune Type

(0 - 15) |

00 2C | 0000 000a | Transmit Attack Time Switch

(0 - 1) |

OFF, ON

(0 - 127) |

-64 - +63

PRST, USER, 1 - 14

|-------------+----------------------------------------------------------------|

00 2D | 0aaa aaaa | Transmit Attack Time

00 0B | 0000 aaaa |

(12 - 1012) |

-50.0 - +50.0 |

MicroTune1 - 128

|-------------+-----------+----------------------------------------------------|

04 07 | 0000 aaaa |

00 2E | 0000 000a | Transmit Decay Time Switch

(0 - 1) |

OFF, ON

(0 - 127) |

-64 - +63

|-------------+----------------------------------------------------------------|

04 0B | 0000 00aa | DYNAMICS

(0 - 3) |

00 2F | 0aaa aaaa | Transmit Decay Time

OFF, Type1, Type2, Type3

04 0C | 0aaa aaaa | DYNAMICS LEVEL

(1 - 127) |

|-------------+-----------+----------------------------------------------------|

|-------------+----------------------------------------------------------------|

00 30 | 0000 000a | Transmit Release Time Switch

(0 - 1) |

OFF, ON

(0 - 127) |

-64 - +63

| 00 00 04 0D | Total Size

+------------------------------------------------------------------------------+

00 31 | 0aaa aaaa | Transmit Release Time

* Setup E.Piano Setting

|-------------+-----------+----------------------------------------------------|

+------------------------------------------------------------------------------+

00 32 | 0000 000a | Transmit Pitch Bend Range Switch

(0 - 1) |

OFF, ON

(0 - 48) |

| Offset

Address |

Description

00 33 | 00aa aaaa | Transmit Pitch Bend Range

|-------------+----------------------------------------------------------------|

|-------------+-----------+----------------------------------------------------|

00 00 | 0000 0aaa | ModelType

(0 - 7) |

(0 - 1) |

00 34 | 0000 000a | Transmit Modulation Depth Switch

(0 - 1) |

OFF, ON

(0 - 127) |

0 - 100 Cent

00 01 | 0000 000a | Tuning Type

00 35 | 0aaa aaaa | Transmit Modulation Depth

Type1, Type2

(54 - 74) |

-10 - +10

00 02 | 000a aaaa | ToneBar Fork Angle

|-------------+-----------+----------------------------------------------------|

00 36 | 0000 000a | Transmit Chorus Level Switch

(0 - 1) |

OFF, ON

(0 - 127) |

00 03 | 000a aaaa | ToneBar Bell Lebel

(54 - 74) |

-10 - +10

(54 - 74) |

-10 - +10

(54 - 74) |

-10 - +10

(54 - 74) |

-10 - +10

(54 - 74) |

-10 - +10

(62 - 66) |

-2 - +2

00 37 | 0aaa aaaa | Transmit Chorus Level

00 04 | 000a aaaa | Bell Character

|-------------+-----------+----------------------------------------------------|

00 38 | 0000 000a | Transmit Reverb Level Switch

(0 - 1) |

OFF, ON

(0 - 127) |

00 05 | 000a aaaa | KeyOff Mute Sound Level

00 39 | 0aaa aaaa | Transmit Reverb Level

00 06 | 000a aaaa | HAM Noise Lelve

|-------------+-----------+----------------------------------------------------|

00 3A | 0000 000a | Transmit Control Change 1 Switch

(0 - 1) |

OFF, ON

00 07 | 000a aaaa | Damper Sound Level

00 3B | 0aaa aaaa | Transmit Control Change 1 Number

00 3C | 0aaa aaaa | Transmit Control Change 1 Value

00 3D | 0000 000a | Transmit Control Change 2 Switch

(0 - 127) |

(0 - 1) |

00 08 | 0000 0aaa | Pickup Distance

|-------------+----------------------------------------------------------------|

OFF, ON

| 00 00 00 09 | Total Size

+------------------------------------------------------------------------------+

00 3E | 0aaa aaaa | Transmit Control Change 2 Number

00 3F | 0aaa aaaa | Transmit Control Change 2 Value

00 40 | 0000 000a | S1 Switch

(0 - 127) |

(0 - 1) |

* SETUP ToneWheel Setting

OFF, ON

(0 - 1) |

OFF, ON

+------------------------------------------------------------------------------+

00 41 | 0000 000a | S2 Switch

| Offset

Address |

Description

|-------------+----------------------------------------------------------------|

| 00 00 00 42 | Total Size

+------------------------------------------------------------------------------+

00 00 | 0000 00aa | Percussion Harmonic

(0 - 2) |

OFF, 2ND, 3RD

00 01 | 0000 000a | Percussion Decay

(0 - 1) |

* SETUP Part

SLOW, FAST

(0 - 8) |

+------------------------------------------------------------------------------+

00 02 | 0000 aaaa | Harmonic Bar 16'

00 03 | 0000 aaaa | Harmonic Bar 5-1/3'

00 04 | 0000 aaaa | Harmonic Bar 8'

00 05 | 0000 aaaa | Harmonic Bar 4'

00 06 | 0000 aaaa | Harmonic Bar 2-2/3'

00 07 | 0000 aaaa | Harmonic Bar 2'

00 08 | 0000 aaaa | Harmonic Bar 1-3/5'

00 09 | 0000 aaaa | Harmonic Bar 1-1/3'

00 0A | 0000 aaaa | Harmonic Bar 1'

| Offset

Address |

Description

|-------------+----------------------------------------------------------------|

00 00 | 0000 aaaa | Receive Channel

(0 - 15) |

1 - 16

(0 - 1) |

OFF, ON |

00 01 | 0000 000a | Mute Switch

|-------------+-----------+----------------------------------------------------|

00 02 | 0aaa aaaa | Tone Bank Select MSB (CC# 0)

00 03 | 0aaa aaaa | Tone Bank Select LSB (CC# 32)

00 04 | 0aaa aaaa | Tone Program Change#

(0 - 127) |

|-------------+----------------------------------------------------------------|

| 00 00 00 0B | Total Size

+------------------------------------------------------------------------------+

|-------------+-----------+----------------------------------------------------|

00 05 | 0aaa aaaa | Part Level (CC# 7)

00 06 | 0aaa aaaa | Part Pan (CC# 10)

(0 - 127) |

L64 - 63R

|-------------+-----------+----------------------------------------------------|

00 07 | 0aaa aaaa | Coarse Tune

(16 - 112) |

-48 - +48

(14 - 114) |

-50 - +50

(0 - 2) |

00 08 | 0aaa aaaa | Fine Tune

00 09 | 0000 00aa | Mono/Poly

MONO, POLY, MONO/LEGATO

(0 - 24) |

(0 - 1) |

00 0A | 000a aaaa | Pitch Bend Range

00 0B | 0000 000a | Portamento Switch

OFF, ON

00 0C | 0000 aaaa |

| 0000 bbbb | Portamento Time

00 0E | 0aaa aaaa | Cutoff

(0 - 127) |

-63 - +63

(0 - 127) |

-63 - +63

(0 - 127) |

-63 - +63

(0 - 127) |

-63 - +63

(0 - 127) |

-63 - +63

00 0F | 0aaa aaaa | Resonance

00 10 | 0aaa aaaa | Attack Time

00 11 | 0aaa aaaa | Decay Time

00 12 | 0aaa aaaa | Release Time

|-------------+-----------+----------------------------------------------------|

00 13 | 0aaa aaaa | Chorus Amount

00 14 | 0aaa aaaa | Reverb Amount

00 15 | 0000 000a | MFX1 Switch

(0 - 127) |

(0 - 1) |

OFF, ON

00 16 | 0000 aaaa |

| 0000 bbbb | MFX1 Type

00 18 | 0000 000a | MFX2 Switch

(0 - 255) |

(0 - 1) |

OFF, ON

00 19 | 0000 aaaa |

| 0000 bbbb | MFX2 Type

(0 - 255) |

|-------------+-----------+----------------------------------------------------|

00 1B | 0000 000a | Receive Bank Select Switch

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

OFF, ON

(0 - 1) |

00 1C | 0000 000a | Receive Program Change Switch

00 1D | 0000 000a | Receive Bender Switch

00 1E | 0000 000a | Receive Modulation Switch

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

■Decimal and Hexadecimal Table

■Examples of Actual MIDI Messages

(An “H” is appended to the end of numbers in hexadecimal notation.)

In MIDI documentation, data values and addresses/sizes of Exclusive messages, etc. are

expressed as hexadecimal values for each 7 bits.

<Example1> 92 3E 5F

9n is the Note-on status, and n is the MIDI channel number. Since 2H = 2, 3EH = 62, and

5FH = 95, this is a Note-on message with MIDI CH = 3, note number 62 (note name is D4),

and velocity 95.

The following table shows how these correspond to decimal numbers.

+——————+——————++——————+——————++——————+——————++——————+——————+

0 | 00H ||

1 | 01H ||

2 | 02H ||

3 | 03H ||

4 | 04H ||

5 | 05H ||

6 | 06H ||

7 | 07H ||

8 | 08H ||

9 | 09H ||

10 | 0AH ||

11 | 0BH ||

12 | 0CH ||

13 | 0DH ||

14 | 0EH ||

15 | 0FH ||

16 | 10H ||

17 | 11H ||

18 | 12H ||

19 | 13H ||

20 | 14H ||

21 | 15H ||

22 | 16H ||

23 | 17H ||

24 | 18H ||

25 | 19H ||

26 | 1AH ||

27 | 1BH ||

28 | 1CH ||

29 | 1DH ||

30 | 1EH ||

31 | 1FH ||

32 | 20H ||

33 | 21H ||

34 | 22H ||

35 | 23H ||

36 | 24H ||

37 | 25H ||

38 | 26H ||

39 | 27H ||

40 | 28H ||

41 | 29H ||

42 | 2AH ||

43 | 2BH ||

44 | 2CH ||

45 | 2DH ||

46 | 2EH ||

47 | 2FH ||

48 | 30H ||

49 | 31H ||

50 | 32H ||

51 | 33H ||

52 | 34H ||

53 | 35H ||

54 | 36H ||

55 | 37H ||

56 | 38H ||

57 | 39H ||

58 | 3AH ||

59 | 3BH ||

60 | 3CH ||

61 | 3DH ||

62 | 3EH ||

63 | 3FH ||

64 | 40H ||

65 | 41H ||

66 | 42H ||

67 | 43H ||

96 | 60H |

97 | 61H |

98 | 62H |

99 | 63H |

<Example2> CE 49

CnH is the Program Change status, and n is the MIDI channel number. Since EH = 14 and

49H = 73, this is a Program Change message with MIDI CH = 15, program number 74 (Flute

in GS).

68 | 44H || 100 | 64H |

69 | 45H || 101 | 65H |

70 | 46H || 102 | 66H |

71 | 47H || 103 | 67H |

72 | 48H || 104 | 68H |

73 | 49H || 105 | 69H |

74 | 4AH || 106 | 6AH |

75 | 4BH || 107 | 6BH |

76 | 4CH || 108 | 6CH |

77 | 4DH || 109 | 6DH |

78 | 4EH || 110 | 6EH |

79 | 4FH || 111 | 6FH |

80 | 50H || 112 | 70H |

81 | 51H || 113 | 71H |

82 | 52H || 114 | 72H |

83 | 53H || 115 | 73H |

84 | 54H || 116 | 74H |

85 | 55H || 117 | 75H |

86 | 56H || 118 | 76H |

87 | 57H || 119 | 77H |

88 | 58H || 120 | 78H |

89 | 59H || 121 | 79H |

90 | 5AH || 122 | 7AH |

91 | 5BH || 123 | 7BH |

92 | 5CH || 124 | 7CH |

93 | 5DH || 125 | 7DH |

94 | 5EH || 126 | 7EH |

95 | 5FH || 127 | 7FH |

<Example3> EA 00 28

EnH is the Pitch Bend Change status, and n is the MIDI channel number. The 2nd byte (00H

= 0) is the LSB and the 3rd byte (28H = 40) is the MSB, but Pitch Bend Value is a signed

number in which 40 00H (= 64 x 12+80 = 8192) is 0, so this Pitch Bend Value is

28 00H - 40 00H = 40 x 12+80 - (64 x 12+80) = 5120 - 8192 = -3072

If the Pitch Bend Sensitivity is set to 2 semitones, -8192 (00 00H) will cause the pitch to

change -200 cents, so in this case -200 x (-3072) ÷ (-8192) = -75 cents of Pitch Bend is being

applied to MIDI channel 11.

<Example4> B3 64 00 65 00 06 0C 26 00 64 7F 65 7F

BnH is the Control Change status, and n is the MIDI channel number. For Control Changes,

the 2nd byte is the control number, and the 3rd byte is the value. In a case in which two or

more messages consecutive messages have the same status, MIDI has a provision called

“running status” which allows the status byte of the second and following messages to be

omitted. Thus, the above messages have the following meaning.

+——————+——————++——————+——————++——————+——————++——————+——————+

D: decimal

H: hexadecimal

Decimal values such as MIDI channel and program change are listed as one greater than

the values given in the above table.

B3 64 00

(B3) 65 00

(B3) 06 0C

(B3) 26 00

(B3) 64 7F

(B3) 65 7F

MIDI ch.4, lower byte of RPN parameter number:

(MIDI ch.4) upper byte of RPN parameter number:

(MIDI ch.4) upper byte of parameter value:

00H

0CH

00H

7FH

A 7-bit byte can express data in the range of 128 steps. For data where greater precision

is required, we must use two or more bytes. For example, two hexadecimal numbers aa

bbH expressing two 7-bit bytes would indicate a value of aa x 128+bb.

(MIDI ch.4) lower byte of parameter value:

In the case of values which have a sign, 00H = -64, 40H = 0, and 7FH = +63, so that the

decimal expression would be 64 less than the value given in the above chart. In the case

of two types, 00 00H = -8192, 40 00H = 0, and 7F 7FH = +8191. For example, if aa bbH

were expressed as decimal, this would be aa bbH - 40 00H = aa x 128+bb - 64 x 128.

Data marked “Use nibbled data” is expressed in hexadecimal in 4-bit units. A value

expressed as a 2-byte nibble 0a 0bH has the value of a x 16+b.

(MIDI ch.4) lower byte of RPN parameter number:

(MIDI ch.4) upper byte of RPN parameter number:

In other words, the above messages specify a value of 0C 00H for RPN parameter number

00 00H on MIDI channel 4, and then set the RPN parameter number to 7F 7FH.

RPN parameter number 00 00H is Pitch Bend Sensitivity, and the MSB of the value indicates

semitone units, so a value of 0CH = 12 sets the maximum pitch bend range to 12 semitones

(1 octave). (On GS sound generators the LSB of Pitch Bend Sensitivity is ignored, but the

LSB should be transmitted anyway (with a value of 0) so that operation will be correct on

any device.)

What is the decimal expression of 5AH?

From the preceding table, 5AH = 90

Once the parameter number has been specified for RPN or NRPN, all Data Entry messages

transmitted on that same channel will be valid, so after the desired value has been

transmitted, it is a good idea to set the parameter number to 7F 7FH to prevent accidents.

This is the reason for the (B3) 64 7F (B3) 65 7F at the end.

What is the decimal expression of the value 12 34H given as hexadecimal

for each 7 bits?

From the preceding table, since 12H = 18 and 34H = 52

18 x 128+52 = 2356

It is not desirable for Performance data (such as Standard MIDI File data) to contain many

events with running status as given in <Example 4>. This is because if playback is halted

during the song and then rewound or fast-forwarded, the sequencer may not be able to

transmit the correct status, and the sound generator will then misinterpret the data. Take

care to give each event its own status.

What is the decimal expression of the nibbled value 0A 03 09 0D?

From the preceding table, since 0AH = 10, 03H = 3, 09H = 9, 0DH = 13

((10 x 16+3) x 16+9) x 16+13 = 41885

It is also necessary that the RPN or NRPN parameter number setting and the value setting

be done in the proper order. On some sequencers, events occurring in the same (or

consecutive) clock may be transmitted in an order different than the order in which they

were received. For this reason it is a good idea to slightly skew the time of each event (about

1 tick for TPQN = 96, and about 5 ticks for TPQN = 480).

What is the nibbled expression of the decimal value 1258?

16 ) 1258

16 )

78 ...10

4 ...14

0 ... 4

TPQN: Ticks Per Quarter Note

Since from the preceding table, 0 = 00H, 4 = 04H, 14 = 0EH, 10 = 0AH, the result is: 00 04 0E

0AH.

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI Implementation

■ Example of an Exclusive Message and Calculating a

■ASCII Code Table

Checksum

Setup Name of MIDI data are described the ASCII code in the table below.

+——————+——————+——————++——————+——————+——————++——————+——————+——————+

Roland Exclusive messages (RQ1, DT1) are transmitted with a checksum at the end (before

F7) to make sure that the message was correctly received. The value of the checksum is

determined by the address and data (or size) of the transmitted Exclusive message.

| Char ||

| Char |

+——————+——————+——————++——————+——————+——————++——————+——————+——————+

32 | 20H | SP ||

64 | 40H |

65 | 41H |

66 | 42H |

67 | 43H |

68 | 44H |

69 | 45H |

70 | 46H |

71 | 47H |

72 | 48H |

73 | 49H |

74 | 4AH |

75 | 4BH |

76 | 4CH |

77 | 4DH |

78 | 4EH |

79 | 4FH |

80 | 50H |

81 | 51H |

82 | 52H |

83 | 53H |

84 | 54H |

85 | 55H |

86 | 56H |

87 | 57H |

88 | 58H |

89 | 59H |

90 | 5AH |

91 | 5BH |

92 | 5CH |

93 | 5DH |

94 | 5EH |

95 | 5FH |

[

]

96 | 60H |

97 | 61H |

98 | 62H |

99 | 63H |

{

}

33 | 21H |

34 | 22H |

35 | 23H |

36 | 24H |

37 | 25H |

38 | 26H |

39 | 27H |

40 | 28H |

41 | 29H |

42 | 2AH |

43 | 2BH |

44 | 2CH |

45 | 2DH |

46 | 2EH |

47 | 2FH |

48 | 30H |

49 | 31H |

50 | 32H |

51 | 33H |

52 | 34H |

53 | 35H |

54 | 36H |

55 | 37H |

56 | 38H |

57 | 39H |

58 | 3AH |

59 | 3BH |

60 | 3CH |

61 | 3DH |

62 | 3EH |

63 | 3FH |

(

)

—

;

|| 100 | 64H |

|| 101 | 65H |

|| 102 | 66H |

|| 103 | 67H |

|| 104 | 68H |

|| 105 | 69H |

|| 106 | 6AH |

|| 107 | 6BH |

|| 108 | 6CH |

|| 109 | 6DH |

|| 110 | 6EH |

|| 111 | 6FH |

|| 112 | 70H |

|| 113 | 71H |

|| 114 | 72H |

|| 115 | 73H |

|| 116 | 74H |

|| 117 | 75H |

|| 118 | 76H |

|| 119 | 77H |

|| 120 | 78H |

|| 121 | 79H |

|| 122 | 7AH |

|| 123 | 7BH |

|| 124 | 7CH |

|| 125 | 7DH |

●How to calculate the checksum

(hexadecimal numbers are indicated by “H”)

The checksum is a value derived by adding the address, size, and checksum itself and

inverting the lower 7 bits.

Here’s an example of how the check sum is calculated. We will assume that in the Exclusive

message we are transmitting, the address is aa bb cc ddH and the data or size is ee ffH.

aa + bb + cc + dd + ee + ff = sum

sum ÷ 128 = quotient ... remainder

128 - remainder = checksum

<Example1> Setting CHORUS TYPE to DELAY (DT1)

According to the “Parameter Address Map” (p. 9), the start address of Temporary Setup is

10 00 00 00H, the offset address of CHORUS at Setup is 04 00H, and the address of

CHORUS TYPE is 00 00H. Therefore the address of CHORUS TYPE of Setup is;

+——————+——————+——————++——————+——————+——————++——————+——————+——————+

10 00 00 00H

04 00H

D: decimal

H: hexadecimal

00 00H

10 00 04 00H

“SP” is space.

DELAY has the value of 02H.

So the system exclusive message should be sent is;

00 00 2B 12

(4) (5)

10 00 04 00

address

(1)

(2)

(3)

data

checksum

(6)

(1) Exclusive Status

(2) ID (Roland)

(3) Device ID (17)

(4) Model ID (RD-700GX) (5) Command ID (DT1)

(6) End of Exclusive

Then calculate the checksum.

10H + 00H + 04H + 00H + 02H = 16 + 0 + 4 + 0 + 2 = 22 (sum)

22 (sum) ÷ 128 = 0 (quotient) ... 22 (remainder)

checksum = 128 - 22 (remainder) = 106 = 6AH

This means that F0 41 10 00 43 12 10 00 04 00 02 6A F7 is the message should be sent.

<Example2> Getting Temporary Performance data (RQ1)

cf.) This operation is the same as Bulk Dump Temporary function in Utility.

According to the “Parameter Address Map” (p. 9), the start address of Temporary Setup is

assigned as following:

10 00 00 00H

10 07 0F 00H

Setup Common

Setup Part Tone Wheel (Part: 16)

As the data size of Setup Tone Wheel Parameter is 00 00 00 0BH, summation of the size and

the start address of Setup Tone Wheel Parameter 16 at Temporary Setup will be;

10 07 0F 00H

+) 00 00 00 0BH

10 07 0F 0BH

And the size that have to be got should be;

10 07 0F 0BH

-) 10 00 00 00H

00 07 0F 0BH

Therefore the system exclusive message should be sent is;

00 00 2B 11

(4) (5)

10 00 00 00

address

00 07 0F 0B

data

(1)

(2)

(3)

checksum

(6)

(1) Exclusive Status

(2) ID (Roland)

(3) Device ID (17)

(6) End of Exclusive

(4) Model ID (RD-700GX) (5) Command ID (RQ1)

Calculating the checksum as shown in <Example 1>, we get a message of F0 41 10 00 00 2B

11 10 00 00 00 00 07 0F 0B 41 F7 to be transmitted.

Download from Www.Somanuals.com. All Manuals Search And Download.

PYLE Audio Stereo Amplifier PTA3000 User Guide
Radio Shack Radar Detector XKKa User Guide
RCA Clock Radio RP3720 User Guide
RCA MP3 Player 5567206A User Guide
Revolabs Microphone Polycom HDX 8000 User Guide
Roland Musical Instrument RK 100 User Guide
RSA Lighting Indoor Furnishings SP97 User Guide
Sanyo Home Theater System DWM 4500 User Guide
Sears Treadmill 535LE User Guide
Sennheiser Headphones HD 410 User Guide