ACHIEVE
MASTERY!
ENJOY CREATING
SOUNDS
WITH
YOUR
SYNTHESIZER
Sound synthesis made easy!
Learn the basics of sound creation on Roland’s
new GAIA SH-01 synthesizer!
Download from Www.Somanuals.com. All Manuals Search And Download.
Filter
Amp
EŠects
This determines the
sound’s brightness.
This determines the sound’s
volume. This is also where the
sound’s attack and decay are
adjusted.
Here you can apply reverb to give
the sound more depth, or add other
eˆects.
EXT IN
You can connect
a portable audio
player here.
Volume
This adjusts the
overall volume.
Patch
Here you can call up
patches.
Roland’s GAIA SH-01 synthesizer is designed so that these three elements of sound are arranged on the
panel in an intuitive layout, making the sound-creating process easy.
Volume
AMP
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP
Play a Sound!
1
The GAIA SH-01 lets you start playing as soon as you turn on the power.
1.
Turn on the power.
2.
Press the NUMBER [1] button.
In this example we’ve selected sound (patch) number 1. On the following page we’ll explain more about how to
select “patches.”
3.
4.
Use the [VOLUME] knob to adjust the volume.
Play the keyboard.
Did you hear sound? Now read the next page, and select and play other sounds (patches).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
What is a “Patch”?
The GAIA SH-01 lets you save the sounds you create.
Each sound you save is called a “patch.”
You can think of the locations that store the patches as being like shelves.
You’ll select the desired patch by GROUP, BANK, and NUMBER.
Internal Memory
(sold separately)
USB Memory
PRESET GROUP
Non-rewritable 64 patches
USER GROUP
Rewritable 64 patches
USB MEMORY
Rewritable 64 patches
You can use these patches to store the original sounds you’ve created.
Select Other Patches!
A sound you’ve saved can be easily recalled simply by pressing a button.
Go ahead and try out each patch to get an idea of what kind of sounds the GAIA SH-01 can produce.
Select a GROUP
Select a NUMBER
Select a BANK
PRESET PATCH
Press one of the [1]–[8] buttons
Press the [BANK]
and then press one
of the [1]–[8] buttons
USER PATCH
USB MEMORY PATCH
How to Think About Sound Programming
A NOTE OF
ADVICE
As you take a closer look at the factory-set patches (preset patches),
you’ll notice all sorts of clever tricks that were used to create the sounds.
Remember these tricks, and use them to create new sounds from scratch.
As you create your own sounds by modifying the preset patches, you’ll
learn various ways in which the sound can be changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
STEP
Create a Sound!
2
Create a Bass Sound
1.
Call up the “PRESET B-1” patch.
Press the [1] button
Press the [BANK] button and
then press the [2] (B) button
Press the [PRESET
PATCH] button
2.
3.
Press the [KEY HOLD] button so it’s blinking.
Press the second C key from the bottom.
You’ll hear an arpeggiated techno bass.
4.
5.
Turn the FILTER [RESONANCE] knob to the
maximum position.
Slowly turn the FILTER [CUTOFF] knob from
the maximum position down to the minimum.
It’s eˆective to make this change in sync with the tempo.
6.
7.
Set the [RESONANCE] knob at 10 o’clock, and
the [CUTOFF] knob at 12 o’clock.
In sync with the tempo, raise the LFO [FILTER DEPTH]
slider, and then bring it back to the center.
For the LFO DEPTH, the center is 0.
A NOTE OF
ADVICE
Use the [CUTOFF] Knob to Fatten the Sound!
Moving the [CUTOFF] knob will make the sound fatter or brighter. Once you’ve
amiliarized yourself with its function, try moving the [CUTOFF] knob between
0 o’clock and one o’clock while you raise and lower the LFO [FILTER DEPTH]
lider. It’s eˆective to do this in sync with the tempo.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Let’s try playing an arpeggiated synth bass sound.
Turn the žlter knob to make the sound change.
How Do I Stop the Sound?
Press the [KEY HOLD] button to stop the sound.
Add More Low End!
Turn on the [TONE 3] button, and play the keyboard.
Layering three tones produces an even fatter sound.
Save The Patch You’ve Created
The GAIA SH-01 has internal memory in which you can store 64 patches
that you’ve created.
By using USB memory (sold separately), you’ll be able to store 64 more
patches.
To save your patch, press the [WRITE] button and then select the save-destination patch number; žnally press
the [WRITE] button once again.
Press the [WRITE] button
Select a BANK
Select a NUMBER
Select the GROUP
Press the [BANK]
and then press one
of the [1]–[8] buttons
Press one of the [1]–[8]
buttons
USER PATCH
USB MEMORY PATCH
A NOTE OF
ADVICE
Layer Tones to Create Fat Sounds!
The GAIA SH-01 lets you layer three tones together,
allowing you to create incredibly fat sounds. Use the
TONE buttons to turn each tone on/oˆ.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
STEP
Create a Pad Sound
3
1.
Call up the “PRESET A-3” patch.
Press the [BANK] button and
then press the [1] (A) button
Press the [PRESET
PATCH] button
Press the [3] button
2.
3.
Press the [KEY HOLD] button so it’s blinking.
Simultaneously press the TONE 1 and TONE 2
[SELECT] buttons so they’re lit.
You can use the [SELECT] buttons to select the tone that you want
to edit.
4.
5.
6.
7.
Play a chord.
While playing a chord, set the AMP [ATTACK]
slider in the range of about 2–5.
The attack sound will become more gentle.
While you play, adjust the slider to get the desired attack.
Next, try pressing the TONE 3 [SELECT] button
and adjusting the sound of TONE 3.
Raise the FILTER [ENV DEPTH] slider from
the center position to 2. The soft sound will
become brighter.
8.
Set the FILTER [ATTACK] slider to 6. Now the
sound of TONE 3 will slowly become brighter
after you play the key.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Here we’ll try playing a polyphonic pad sound. This is a synth pad that combines an
attack sound with a softer sound.
9.
Lower the FILTER [ENV DEPTH] slider
downward from the center. The sound of TONE
3 will disappear.
For additional expressive possibilities, you can move the FILTER
[ENV DEPTH] slider while you play.
Turn oš the [KEY HOLD] button, and raise
the TONE 3 AMP [R] (RELEASE) slider to the
maximum position.
The time over which the sound of TONE 3 disappears will
lengthen.
You can change how the sound varies over time by adjusting the
ADSR, so you may want to adjust these settings until you get the
sound you like.
Save the Patch You’ve Created
To save your patch, press the [WRITE] button, then select the save-destination patch number, and žnally press
the [WRITE] button once again.
Press the [WRITE] button
A NOTE OF
ADVICE
Adjust the Envelope!
For example, if you want to create a gradual attack, such as for strings, try
raising the [A] slider. If you want the sound to linger for a while after you take
your hand oˆ the keyboard, raise the [R] slider.
The sound’s attack and decay are created in the ENV (envelope generator) section.
Raise or lower the [A] [D] [S] [R] sliders, and notice how they aˆect the sound.
Volume
Symbol Name
Volume change
Release the key
Attack time
Decay time
Duration of the attack
Duration of the decay
A
D
S
S
Sustain level Level while sustained
Release time Duration of the release
Time
A
D
R
R
Play a key
Download from Www.Somanuals.com. All Manuals Search And Download.
9
STEP
Create a Wind Sound
4
Let’s try playing a wind sound that was created using noise. Noise allows you to produce this type of sound.
1.We’ll try controlling the character of the wind while listening to it.
Turn the FILTER [CUTOFF] knob all the way to
the left.
2.
Call up the “PRESET A-8” patch.
Press the [BANK] button and
then press the [1] (A) button
Press the [8] button
Press the [PRESET
PATCH] button
3.
4.
Press the [KEY HOLD] button so it’s blinking.
Press and hold any key. The wind will start
blowing.
The sound of trickling water will also begin.
5.
While holding down the key to make the wind
continue blowing, turn the FILTER [CUTOFF]
knob toward the right, and move it between
the 10 o’clock and 1 o’clock positions.
This lets you control the character of the wind.
Use CutoŠ to Control the Character of the Wind
A NOTE OF
ADVICE
As you turn the [CUTOFF] knob
Level
Overtones
toward the left, the sound will
being cut
become more mu¥ed. When the
knob is turned all the way toward
the left, the sound will be nearly
inaudible. This is because most of the
frequency range is not being allowed
to pass.
Frequency
10
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP
Create A Distorted Guitar
5
Sound
The GAIA SH-01 contains a powerful eˆects section that lets you use žve eˆects simultaneously.
Let’s try creating the sound of a distorted guitar.
1.
Call up the “PRESET A-6” patch.
Press the [BANK] button and
then press the [1] (A) button
Press the [PRESET
PATCH] button
Press the [6] button
2.
3.
Press the [KEY HOLD] button to turn oŠ its
illumination.
First, let’s listen to the undistorted sound.
Press the EFFECTS [DIST] button so its light is oˆ, and play the
keyboard.
You’ll hear the undistorted sound.
Press the [DIST] button
so its light goes out
4.
Press the EFFECTS [DIST] button so it’s lit, and
play the keyboard again.
Play two-žngered chords to simulate the performance of a rock
guitarist.
If you hold a note for a while, you’ll hear the feedback that’s
typical of a guitar amp played at high volume.
GAIA’s Amazing EŠects!
The GAIA SH-01 contains žve eˆects processors: distortion (DIST), modula-
A NOTE OF
ADVICE
tion (FLANGER), delay (DELAY), reverb (REVERB), and low boost (LOW
BOOST). Using the DIST or FUZZ eˆects located in the leftmost column will
distort the sound, making it more aggressive. DELAY and REVERB let you
create lush, spacious sounds. Go ahead and try out various eˆects to hear
what they do.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
APPENDIX
Examples of Creating Sounds
Synth Bass (PRESET PATCH: H-1)
2
3
7
8
6
1
5
4
4
9
1
2
3
4
Press the [CANCEL/SHIFT] button and [WRITE] button to recall the initialized sound.
The sawtooth wave is selected. Press the [VARIATION] button to light the [WAVE] button into red.
Since the bass usually sounds in the lower registers, turn the [PITCH] knob to the left so the sound is
lowered by an octave.
Set the FILTER [CUTOFF] knob between 8 and 9 o’clock.
The sound will diminish.
Next, you need to specify the character of the sound’s sustained portion. Set the FILTER ENV [ENV
DEPTH] slider to the 60% position. Set the FILTER ENV [S] slider to the 65% position. The sound will
be somewhat muted.
5
6
Now you’re ready to create the attack. Set the FILTER ENV [D] slider to the 35% position. The attack
will be softened.
To simulate the eˆect of keeping a žnger on the string and sliding to a diˆerent fret,
press the [MONO] button so it’s lit.
7
8
Set the [RESONANCE] knob to the 11 o’clock position, giving the sound a distinctive character.
Set the AMP ENV [S] slider to the maximum position, and set the [A] [D] [R] sliders to the minimum
position.
9
Make žne adjustments to the FILTER ENV [ENV DEPTH] slider to determine the overall tonal
character.
This synth bass is similar to the sound in chapter 2 “Recall and Edit Presets”, chapter 5 “How to Make
a Sound”of the
DVD.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Synth Lead (PRESET PATCH: H-7)
2
7
3
4
8
11
9
1
5
6
10
1
Press the [CANCEL/SHIFT] button and [WRITE] button to recall the initialized sound.
The sawtooth wave is selected. Press the [VARIATION] button to light the [WAVE] button into
red.
2
3
4
5
Turn the [PITCH] knob to the right so the sound is raised by an octave.
Set the FILTER [CUTOFF] knob to the 2 o’clock position.
Set the FILTER [RESONANCE] knob to the 8 o’clock position.
Now you’re ready to create the attack.
Set the FILTER ENV [A] [D] [S] [R] sliders all to the lowest position.
6
7
8
9
Next, you need to determine the overall tonal character.
Slightly raise the FILTER ENV [ENV DEPTH] slider.
Press the FILTER [SLOPE] button to select -24 dB.
The sound will become a bit softer.
Set the AMP ENV [S] slider to the maximum position, and set the [A] [D] [R] sliders
to the minimum position.
To get a more appropriate lead feeling, press the [MONO] button so it’s lit.
With this setting, the patch will play only single notes, and if you press a key while still holding
the previous key, the sound will change smoothly to the new pitch.
10
11
Press the [REVERB] button so it’s lit.
Turn the [CONTROL 1] knob to add reverberation to the lead sound.
This synth lead is similar to the sound in chapter 2 “Recall and Edit Presets”of the
DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
APPENDIX
Examples of Creating Sounds
Synth Pad (PRESET PATCH: H-2)
2
3
6
10 12
1
4
5
7
8
9
11
1
2
3
4
Press the [CANCEL/SHIFT] button and [WRITE] button to recall the initialized sound.
The sawtooth wave is selected.
Press the OSC [WAVE] button to select SUPER SAW. Press the [VARIATION] button to light the [WAVE]
button into red.
Set the FILTER [CUTOFF] knob to the 1 o’clock position.
The sound will become a bit darker.
Now you’re ready to specify the overall character of the sound. Set the FILTER ENV [A] slider to 55%,
the [D] slider to 70%, the [S] slider to 25%, and the [R] slider to 10%.
5
6
7
Raise the FILTER ENV [ENV DEPTH] slider from 0 to the second mark to specify the overall character.
Turn the AMP [LEVEL] knob all the way to the right (MAX).
Set the AMP ENV [A] slider to the 20% position.
The attack will become slower.
8
Raise the AMP ENV [R] slider to about the middle position.
Now the sound will linger for a while even after you take your žnger oˆ the key.
9
Press the [PANNING DELAY] button so it’s lit.
10
11
12
Set the EFFECTS [CONTROL 1] knob to the 10 o’clock position to add a sense of spaciousness.
Press the [REVERB] button so it’s lit.
Set the EFFECTS [CONTROL 1] knob to the 1 o’clock position to add reverberation.
This synth pad is similar to the sound in chapter 5 “How to Make a Sound”of the
DVD.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound EŠect (PRESET PATCH: H-5)
2
3
4
9
11
1
5
6
7
8
10
Here’s how to create a sound ešect that might be appropriate
for a spaceship taking oš.
* These settings may produce a sudden, loud sound. Turn the knobs slowly to avoid damaging your hearing
or your speakers.
1
Press the [CANCEL/SHIFT] button and [WRITE] button to recall the initialized sound.
The sawtooth wave is selected.
2
3
Press the OSC [WAVE] button to select NOISE.
Turn the FILTER [CUTOFF] knob all the way to the left (MIN).
You will no longer hear sound.
4
5
Set the FILTER [RESONANCE] knob to the 9 o’clock position.
Set the FILTER ENV [A] slider to 50%, the [D] slider to 65%, and the [R] slider to 60%.
Lower the [S] slider all the way to the bottom.
6
7
Slowly raise the FILTER ENV [ENV DEPTH] slider to the maximum position.
Set the AMP ENV [A] slider to 55%, the [D] slider to 65%, and the [R] slider to 70%.
Lower the [S] slider all the way to the bottom.
8
9
Press the [PANNING DELAY] button so it’s lit.
Set the EFFECTS [CONTROL 1] knob to the 11 o’clock position to add some spaciousness.
10
11
Press the [REVERB] button so it’s lit.
Set the EFFECTS [CONTROL 1] knob to the 12 o’clock position to add reverb.
This sound eˆect is similar to the sound in chapter 5 “How to Make a Sound”of the
DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Experience the magic of creating your own sounds.
For more than a quarter century, Roland has dežned and redežned the state of the art in
synthesizers.
Today, the fundamentals for sound creation remain the same for most synthesizers.
By understanding the fundamentals, anyone can enjoy creating sound for virtually any
type of synthesizer.
2007
V-Synth GT
SH-201
2003
V-Synth
1996
JP-8000
1982
SH-101
2006
2008
1981
JUPITER-8
1978
1979
SH-1
SH-2
SH-1000
1973
Fantom-G
1991
JD-800
1987
D-50
1982
JUNO-60
Copyright © 2010 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
Roland and GAIA are either registered trademarks or trademarks of Roland
Corporation in the United States and/or other countries.
*
5
1
0
0
0
1
1
7
3
0
-
0
3
*
RAM-4520
Download from Www.Somanuals.com. All Manuals Search And Download.
|