| 	
		 Battery notes:   
					Installing the battery pack   
					Xbox 360™ Induction Battery Charger Kit   
					1 
					2 
					Remove the controller battery compartment cover.   
					Install the battery pack into the controller.   
					• 
					Rechargeable batteries only attain maximum charging capacity once   
					they have been charged/discharged several times.   
					• 
					The battery has a limited service life and playing time is reduced after   
					many charging cycles.   
					Package contents   
					• 
					• 
					• 
					• 
					Induction battery charger   
					Battery packs (2)   
					AC adapter   
					• 
					• 
					Do not short-circuit the battery or place it in fire.   
					Unusable batteries should be disposed of as hazardous waste. Do not   
					dispose of batteries in household waste.   
					Quick Setup Guide   
					Important safety information   
					1) Read these instructions.   
					Features   
					Induction battery charger base (front)   
					3 
					Plug the AC adapter into the DC IN jack on the charger and   
					into a power outlet.   
					2) Keep these instructions.   
					3) Heed all warnings.   
					4) Follow all instructions.   
					5) Do not use this apparatus near water.   
					6) Clean only with a dry cloth.   
					7) Do not install near any heat sources such as radiators, heat registers,   
					stoves, or other apparatus (including amplifiers) that produce heat.   
					Using the charger   
					# 
					1 
					2 
					Description   
					Charge indicator   
					DC IN jack   
					# 
					3 
					4 
					Description   
					On/Off switch   
					Charge indicator   
					8) Do not defeat the safety purpose of the polarized plug. A polarized   
					plug has two blades with one wider than the other. The wide blade   
					is provided for your safety. If the provided plug does not fit into your   
					outlet, consult an electrician for replacement of the obsolete outlet.   
					Important: The battery pack must be fully charged before you use it for   
					the first time. Allow up to four hours for the first charge.   
					1 
					2 
					Turn on the charger.   
					Locate the sticker on the top of the charger, then place the   
					controller on the charger. For best performance, center the   
					battery pack where the sticker indicates.   
					9) Protect the power cord from being walked on or pinched particularly   
					at plugs, convenience receptacles, and the point where they exit from   
					the apparatus.   
					Induction battery charger base (top)   
					10) Only use attachments/accessories specified by the manufacturer.   
					11) Unplug this apparatus during lightning storms or when unused for   
					long periods of time.   
					12) Refer all servicing to qualified service personnel. Servicing is required   
					when the apparatus has been damaged in any way, such as power-   
					supply cord or plug is damaged, liquid has been spilled or objects   
					have fallen into the apparatus, the apparatus has been exposed to rain   
					or moisture, does not operate normally, or has been dropped.   
					If the charger detects a battery, charging starts and the glow bar   
					lights red. When charging is complete, the glow bar lights green.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					RF-GXBX011   
					QUICK SETUP GUIDE   
				 |