CD9912
Stereo CD Radio
Cassette Recorder
Please read this manual before use
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
(Top)
4
5
Fu n ction
3
CD
D igital Sou nd C on trol
Tape
Radio
SPATIAL
SOUND
2
1
CD 9912
Vo lu m e
Digital to Analogue Converter
6
Open
7. Pause button
1. Volume control
8. Stop/Eject button
9. Fast forward button
10. Rewind button
11. Play button
2. Spatial sound control
3. Function switch
4. Telescopic aerial
5. Digital sound control
6. CD door
12 11 10
9
8
7
12. Record button
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
2
020 8758 0338 (Mon-Fri)
Controls
(Front)
13 14 15
16
17
19
20 21 22 23
24
18
Band
UP/
F.Skip
Stop
On
Repeat
MEM
DOWN/
B.Skip
Stand By
Prog
Intro
Track
S
EN
S
O
R
Pla y/Pa use
Random
Close
25
STEREO RADIO CD CASSETTE PLAYER
Pla y
Rewind
F. Forward
Stop/Eje ct
Pa use
13. Intro button
20. Stop button
14. Random/Memory down button
15. Repeat/Memory up button
16. Band select button
21. Play pause button
22. Standby button
23. Prog. button
17. Tuning Up/F.Skip button
18. Tuning Down/B.Skip button
19. Display
24. FM Mono\Stereo switch (on rear)
25. Cassette door
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Display
Indicates sound effect
Lights during CD playback
Lights during CD pause
Lights during CD intro mode
Lights during CD repeat all tracks
Flashes during CD repeat one track
Lights during CD random play
Indicates radio memory channel
Indicates CD track
Lights when receiving FM stereo stations
Lights when adjusting volume
Indicates selected waveband
Indicates CD track number or radio memory
channel
Indicates CD playing time or radio station
frequency
Shows MHZ for FM reception and kHz for
MW/LW reception
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
4
020 8758 0338 (Mon-Fri)
Battery operation
1. Remove the Battery cover on the rear of your CD radio cassette by
pushing the catches in the direction of the arrows.
2. Insert two LR6 (AA size) batteries into the small spaces in the battery
compartment. Insert eight LR20 (D size) batteries into the remaining
spaces in the compartment. Take care to ensure all batteries are
inserted with the correct polarity as shown inside the battery
compartment. Replace the battery cover.
note : the two LR6 batteries provide power for the radio memory
and must be fitted at all times.
3. Reduced power, distortion, and a ‘stuttering’ sound are all signs that
the batteries may need replacing. If your CD radio cassette is not to
be used for any extended period of time it is recommended that the
eight LR20 (D size) batteries are removed from the radio.
We would recommend for economy that the CD9912 is used on the
mains whenever possible with battery operation for occasional or
stand-by use only.
Mains operation
1. Place your CD radio cassette on a flat surface.
2. Plug the mains lead into the Socket located on the rear of your CD
radio cassette. Ensure that the plug is pushed fully into the socket.
ON
3. Plug the other end into a wall socket and switch on.
4. Do not allow this unit to be exposed to water, steam or sand. Do not
leave your radio where excessive heat could cause damage such as
in a parked car where the heat from the sun can build up even though
the outside temperature may not seem too high.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
General
Switching on and off
1. Press the Standby button to switch on. The Standby indicator
located within the Standby button will turn off.
2. ToswitchoffpresstheStandbybuttonagain.TheStandbyindicator
Stand By
Stand By
will light up.
3. When using the mains supply the Standby button on the remote
control can be used to turn the unit on and off.
Stand By
Play /Pa use
4. WhenusingbatterysupplytheStandbybuttonontheremotecontrol
Digital Sound
Control
can only be used to turn the unit off. This is to save battery life.
Sound controls
Volume
1. Adjust the volume to the required level using the Volume control.
SPATIAL
SOUND
Spatial sound
1. This feature creates a 3-D effect from the stereo sound produced by
the loudspeakers. Press the Spatial sound button to turn on Spatial
sound. Press the button again to release and turn off Spatial sound.
Volume
Digital Sound Control (DSC)
The DSC feature creates a realistic atmosphere for a style of music using
the latest digital sound technology.
1. RepeatedlypressandreleasetheDSCbuttonuntilthedesiredsound
effect CLASSIC, ROCK or POP is shown on the display.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
6
020 8758 0338 (Mon-Fri)
Radio operation
Function
note : the two LR6 batteries provide power for the radio memory and
must be fitted at all times.
CD
Tape
Radio
1. Set the Function switch to the 'Radio' position.
2. Adjust the Volume control until a hissing sound is heard.
Band
Volume
3. Repeatedly press and release the Band button until the required
wavebandappearsinthedisplay. OnFM fullyextendthe Telescopic
aerial. On MW and LW rotate your radio for best reception.
4. Press and hold down either the UP
or DOWN
buttons until
the frequency in the display begins to change rapidly. Release the
button.
5. Your radio will scan the selected waveband, stopping each time it
finds a station of sufficient strength. Adjust the Volume control to the
required level.
UP/
F.Skip
6. To search for additional stations repeat the above procedure. Search
DOWN/
B.Skip
tuning may be stopped by a single press on either the UP
DOWN buttons.
or
7. To tune to a weak station repeatedly press and release the UP
orDOWN buttonsuntilthecorrectfrequencyisdisplayedoruntil
reception is best.
8. OnFM ifthestationbeingreceivedisweaksomehissmaybeaudible,
to reduce the hiss set the FM mode switch (located on the rear of the
unit) to the 'Mono' position.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Presetting stations
You may store up to 40 different stations, 20 on FM, 10 on MW and 10 on
LW.
Band
UP/
F.Skip
1. Select the required waveband using the Band button.
2. Select the required station using the UP
or DOWN
buttons.
DOWN/
B.Skip
3. Press the Prog. button. MEMORY will flash in the display.
4. Select the required memory channel where you wish to store the
station using the MEM
or
buttons.
5. Whilst MEMORY is flashing in the display press PROG. to store the
station.
Prog
6. Memory will disappear from the display. The display will indicate the
stations memory channel, its frequency and waveband.
7. Repeat the above procedure for the remaining presets.
MEM
8. If you assign a station to a memory channel that had been previously
assigned to a different station the old station is deleted and replaced
by the new one.
Prog
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
8
020 8758 0338 (Mon-Fri)
Band
Recalling a preset station
MEM
1. Select the required waveband using the Band button.
2. Select the desired memory channel using the MEM or buttons.
The display indicates the selected channel, station frequency and
waveband.
Last station memory
1. Your radio provides an automatic last station memory function. This
function recalls the station that was playing when the radio was
switched off.
Stand By
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Compact discs
Use only Digital Audio CDs which have the
symbol.
Never write on a CD or attach any sticker to the CD. Always hold the CD
at the edge and store it in its box after use with the label facing up.
To remove dust and dirt, breathe on the CD and wipe it with a soft, lint-free
cloth in a straight line from the centre towards the edge.
Cleaning agents may damage the CD
Do not expose the CD to rain, moisture, sand, or to excessive heat. (e.g.
from heating equipment or in motor cars parked in the sun).
Inserting a CD
Function
1. Set the Function switch to CD.
CD
Tap e
Radio
2. To open the CD compartment, push theCD door on the edge marked
'Open'
3. InsertanAudioCD, printedsidefacingup. ClosetheCDdoor. TheCD
player will scan the contents of the CD and the total number of tracks
will appear on the display.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
10
020 8758 0338 (Mon-Fri)
Playing a CD
1. Press the Play/Pause button to start playback.
2. Set the Volume to the required level.
Play/Pause
3. Set the Spatial sound and DSC controls to the required positions.
4. TopauseplaybackpressthePlay/Pausebutton.ThePausesymbol
will appear in the display. To resume playback press the Play/Pause
button again.
SPATIAL
SOUND
5. To stop playback, press the Stop button. The total number of CD
tracks and playing time will appear on the display.
Volume
6. To take out the CD, open the CD door by pushing the edge marked
'Open'. The CD door should only be opened when the CD is in Stop
mode.
Play/Pause
Stop
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Selecting a track
1. Whilst the CD is playing, press either the B.skip
or F.skip
buttons to change to the desired track.
UP/
F.Skip
2. You can also skip tracks when the player is in stop mode. Skip to the
desired track using the B.skip or F.skip buttons. Press
the Play/Pause button to play the selected track.
Play/Pause
DOWN/
B.Skip
3. You can search for a particular part of a track whilst the CD is playing,
press and hold down either the B.skip or F.skip buttons.
Release the button when the desired part of the track is reached.
Random play
1. Press the Random button. 'RANDOM' will appear in the display.
2. PressthePlay/Pausebutton, tracksareplayedinrandomorderuntil
Random
all tracks have been played once.
3. Press the Stop button to cancel Random play.
4. Random play is not possible during playback of a CD programme.
Stop
Play/Pause
Intro play
1. Press the Intro button. 'INTRO' will appear in the display.
2. The first 10 seconds of each CD track will play.
Intro
3. Press the Stop button to cancel Intro play
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
12
020 8758 0338 (Mon-Fri)
Repeat play
Repeating the CD
Repeat
1. Press the Repeat button once. 'REPEAT' will appear in the display.
2. Press the Play/Pause button, the CD will repeat continuously.
3. Press the Stop button to cancel repeat play.
Repeating a track
1. Press the Repeat button twice. 'REPEAT' will flash in the display.
Repeat
2. Press the Play/Pause button, the track will repeat continuously.
3. Press the Stop button to cancel repeat play.
CD programmed play
By programming your CD player you can play up to 20 tracks in any
desired order.
Prog
1. Whilst the CD is in STOP mode, press the Prog. button. 'MEMORY'
and 'TRACK' will flash in the display.
2. Select the first track using the B.skip
or F.skip
buttons.
UP/
F.Skip
3. Press the Programme button to store the track.
Play/Pause
4. Repeat the above steps until you have completed your program.
Press the Play/Pause button to commence play of the selected
tracks.
Prog
DOWN/
B.Skip
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Checking a programme
1. Whilst the CD is in STOP mode, repeatedly press and release the
Prog. button to step through the programme. The display will show
the programme and track numbers.
Prog
2. Press the Play/Pause button to commence playback of the
Play/Pause
programme.
Changing a programme
Adding tracks to the programme
1. Repeatedly press and release the Prog. button until the display
Prog
shows the first empty memory location (00 under track).
2. You can now add track to the programme as described earlier (max
20 tracks).
Replacing previously programmed tracks
1. Repeatedly press and release the Prog. button until the display
shows the memory location you wish to replace.
Prog
2. Select the new track using the B.skip
or F.skip
buttons.
UP/
F.Skip
3. Store the track by pressing the Prog. button.
4. Press the Play/Pause button to commence playback of the
DOWN/
B.Skip
Prog
Play/Pause
programme.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
14
020 8758 0338 (Mon-Fri)
Playing a programme
1. Pressthe Prog. buttononcetoshowthefirsttrackoftheprogramme.
Prog
2. Press the Play/pause button. Play will start with the first track of the
programme and stop after the last track of the programme.
3. Press the Stop button to stop playback of a programme.
Stop
4. Whilst playing a programme it is possible to select the required
Play/Pause
programme track using the B.skip
or F.skip
buttons.
Erasing a programme
1. To clear a CD programme press the Prog. button followed by the
Stop button.
2. CD programmes can only be erased whilst the CD player is in stop
mode.
Stop
Prog
3. CD programmes are also erased:-
By opening the CD door
Moving the function switch from the CD position
If the batteries are exhausted or if the power supply is interrupted in
any way.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Listening to cassette tapes
Function
1
Note: This unit is not suitable for recording onto CHROME (IEC II) or
METAL (IEC IV) cassettes. For playback any cassette type may be used
CD
Tap e
Radio
Play
Rewind
F. Forward Stop/Eject
Pause
1. Set the Function switch to the 'Tape' position.
2. Press the Stop eject button to open the Cassette compartment.
2
5
3. Insert a pre-recorded cassette with the tape surface downwards and
the side with the desired recording facing towards you.
4. Close the Cassette compartment.
5. Depress the Play button and adjust the Volume control to suit your
5
personal taste.
SPATIAL
SOUND
6. Set the Spatial sound and DSC controls to the required positions
6
7. Use the Fast forward or Rewind buttons to locate a specific part of
6
the tape.
Volume
8. If you wish to temporarily stop the playback depress the Pause
button. When you are ready to resume playback press the Pause
button a second time.
Play
Rewind
F. Forward Stop/Eject
Pause
9. To stop the tape press the Stop/Eject button.
7
7
9
8
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
16
020 8758 0338 (Mon-Fri)
Recording from the Radio
Function
3
1
1. Set the Function switch to the 'Radio' position.
2. Tune in to the desired station.
CD
Tape
Radio
3. Adjust the Volume control to suit your requirements.
Volume
4. Insert a blank cassette with the tape surface downwards and the side
you wish to record on facing towards you.
Play
Rewind
F. Forward Stop/Eject
Pause
5. Depress the Record button to commence recording.
5
7
6. The recording level is set automatically and is not affected by the
setting of the Volume control.
7. To stop the recording press the Stop/Eject button.
Recording from CD
Function
1
1. Set the Function switch to the 'CD' position.
CD
Tap e
Radio
2. Insert a CD into the compartment. Insert a blank cassette with the
tape surface downwards and the side you wish to record on facing
towards you.
Play
Rewind
F. Forward Stop/Eject
Pause
3. Depress the Record button to commence recording. The CD will
start automatically (CD syncro start)
3
4
4. To stop the recording press the Stop/Eject button.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Preventing accidental erasure
1. To safeguard your recordings against accidental erasure, break off
the appropriate tab on the cassette as shown .
Safety tab side A
Safety tab side B
2. There is one tab for each side of the cassette. This will prevent the
Record button from being pressed.
A
3. To restore the cassette to normal, seal the tab openings with a small
piece of self-adhesive tape.
Cleaning tape heads
The oxide from magnetic tapes can accumulate on the pinch roller (A) the
capstan shaft (B) and also the heads (C and D). This will impair the sound
quality.
To clean these parts proceed as follows:-
1. Turn off the power to the unit.
2. Press the Stop/Eject button.
C
A
B
D
3. Press the Play button and the heads will be clearly seen.
4. Clean the surfaces (A, B, C, D) with a lint free rag or cotton swab
soaked in alcohol. Press the stop/eject button as soon as cleaning is
over.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
18
020 8758 0338 (Mon-Fri)
Remote control
The buttons on the remote control have the same functions as the
corresponding buttons on the main unit.
Note:WhenusingyourCDradiocassetteonbatteries, theStandbybutton
on the remote handset can only be used to switch the unit off. To
switch the unit on when using battery supply, use the Standby button
on the main unit.
Stand By
Play/Pause
Digital Sound
Control
Batteries
1. Openthecompartmentontherearofyouremotecontrolbyslidingthe
cover in the direction of the arrow.
2. Insert two LR03 (AAA size) batteries into the small spaces in the
battery compartment. Take care to ensure the batteries are inserted
with the correct polarity as shown inside the battery compartment.
Replace the battery cover.
Stop
UP/F.Skip
Replacement of batteries
Volume
1. If the range of your infrared remote control seems to decrease, or if
certain functions no longer operate, you should replace the batteries.
DOWN/B.Skip
Random
2. If your remote control is not to be used for any extended period of time
it is recommended that the two LR03 batteries are removed from the
handset.
CD 9912
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Headphones
1. A Headphone Socket (3.5mm) located on the left hand end of your
CD radio cassette is provided for use with either headphones or an
earpiece. Inserting the headphone plug automatically mutes the
internal loudspeaker.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
20
020 8758 0338 (Mon-Fri)
Specifications
Power Requirements
Mains
Circuit Features
AC 230 volts, 50Hz
8 x LR20 (C size)
2 x LR6 (AA size)
only
Loudspeaker
Output Power
Headphone socket
Aerial System FM
MW
2 x 100mm
Batteries
2 x 2.5 Watts
2 x LR03 (AAA size) included
3.5mm dia
Telescopic aerial
Built-in Ferrite aerial
Built-in Ferrite aerial
LW
Frequency Coverage
FM
MW
LW
87.5-108MHz
522- 1620kHz
146- 281kHz
ROBERTS RADIO LIMITED
PO BOX 130
MEXBOROUGH
SOUTH YORKSHIRE
S64 8YT
The Company reserves the right to amend the specification without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Guarantee
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free
of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer will
beabletoattendtoanydefectquicklyandefficiently, butshoulditbenecessarythedealerwillreturntheinstrumenttothecompany’sservicedepartment
for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact Roberts
Radio Technical Services department at the address shown on the rear of this booklet before taking further action.
These statements do not affect the statutory rights of a consumer.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
22
020 8758 0338 (Mon-Fri)
ROBERTSRADIOTECHNICALSERVICESDEPARTMENT
97-99 Worton Road
IsleworthMiddlesex
TW7 6EG
Technical Helpline:- 020 8758 0338 (Mon-Fri)
Issue 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|