If something seems to be not working properly:
If the red satellite indicator lights chase along the
row, the selected satellite cannot be found.
Check for obstructions such as trees & buildings.
If the POWER, LNB & LOCK lights come on
together (POWER & LOCK will blink) check the
cable between controller & sat-dome.
Symptom
What you should do
The control box does not power up. 1) Check the power supply.
2) Switch the control unit off and on again.
The system seems to operate
correctly but no satellite is found.
1) Make sure that the dish has a clear view of the satellite –
avoid trees, buildings, pylons, etc.
2) Check cables and connections.
3) Switch the control unit off and on again.
A satellite is found but there’s no
picture on your TV.
1) Check that you have selected the correct satellite and that
your receiver is set for the same one.
2) Check that cables and connectors between the sat-dome
controller, the receiver and the TV are all secure.
1) Check that there are no obstructions between the dish and
the satellite.
You can see a picture on the TV but
it is breaking up.
If you are near the edge of the
satellite’s transmission area
(footprint) this can happen.
The TV has sound but no picture.
2) Check all cables and connectors.
1) Check that you have not selected radio on your receiver
instead of TV.
2) Check that the power to your TV is sufficient for it to
operate correctly.
You’ve tried the suggestions but the 1) Contact your installer or dealer.
system is still not working. 2) If they are unable to fix the problem, contact RoadPro.
Installation and instruction manual
for static RoadPro sat-domes
30cm Sat-dome
40cm Sat-dome
ŸD3201 / 2: 30 / 40cm static sat-dome
ŸD3205 / 6: 30 / 40cm static sat-dome with twin LNB
ŸD3209 / 10: 30 / 40cm static sat-dome with auto skew
D3211 / 12: 30 / 40cm static sat-dome with twin LNB +
auto skew
Ÿ
Thank you for buying a RoadPro sat-dome. To enable us to provide the
best after-sales service, please make a note of the unit’s serial number
which you will find above the external cable connecting socket.
Auto-skew will significantly improve the chances of receiving a good
signal in areas away from the centre of the footprint areas shown.
My RoadPro sat-dome’s serial number is:................................................
Distributed in the U.K. by
RoadPro Ltd, Unit 7, Stephenson Close, Daventry, Northants, NN11 8RF
4
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|