Ritek MP3 Player QuattroDrive User Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

About the Remote Control .................................................... 1

Cable Connections ............................................................... 4

Connecting the Power ...................................................... 4

.......................................................................................... 4

Standalone Connection .................................................... 4

Connecting to Headphones or a Stereo System .............. 4

Connecting to a TV or Projector ....................................... 5

Connecting to a Computer................................................ 5

Inserting Flash Memory Cards.............................................. 6

Inserting and Removing a CD............................................... 6

Turning the QuattroDrive On ................................................ 7

Installing Drivers ................................................................... 7

Using the OSD Setup Menus................................................ 8

Navigating the Menus....................................................... 8

Adjusting the TV Settings ................................................. 9

Setting the OSD Language............................................. 10

GENERAL SETUP ......................................................... 11

SPEAKER SETUP.......................................................... 12

AUDIO SETUP ............................................................... 13

PREFERENCES............................................................. 15

DISC SETUP.................................................................. 18

Switching between Flash Memory Cards and a CD ........... 18

Using the Remote Control .............................................. 18

Using the Buttons on the QuattroDrive........................... 18

Copying Files to the Computer ........................................... 19

Copying from a Flash Memory Card............................... 19

Copying from a CD......................................................... 19

Listening to Music............................................................... 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing and Editing Media Files.........................................20

Viewing files with the SMART NAVI Menu .....................20

Viewing files without the SMART NAVI Menu ................21

Using the Slide Show......................................................22

Playing a VCD or DVD........................................................23

Basic Functions ..............................................................23

Programming the Playing Order of Audio or Video CDs.25

Going to a Particular DVD Chapter.................................25

Repeating Chapters/Tracks ...........................................26

Writing (Burning) Files to a CD ...........................................26

Writing from a Flash Memory Card.................................26

Disk Spanning.................................................................28

Writing from the Computer..............................................28

Erasing a CD-RW ...........................................................28

Error Codes.........................................................................29

Quick Start Guide................................................................29

RESET CVBS NTSC ......................................................29

SET PAL.........................................................................29

Download from Www.Somanuals.com. All Manuals Search And Download.

Below is a description of the remote control’s buttons:

MODE

PAUSE

PLAY

OSD

PBC

ANGLE

ZOOM

TITLE

AUDIO

COPY

ENTER

MUTE

STOP

SUBTITLE RESUME

SLOW

L/R

STEP

GOTO

PROGRAM

RANDOM

SHUFFLE SETUP

REPEAT REP A-B CLEAR

+10

-/--

1. POWER ON/OFF

2. MODE

Turns the PhotoStorage on and off.

Switches between the CD and a flash card.

Download from Www.Somanuals.com. All Manuals Search And Download.

The On Screen Display (OSD) displays the status bar

at the top of the screen that includes playback and

remaining time for both the title and the chapter of the

current multimedia.

3. OSD

4. PAUSE

5. PBC

Pauses playback of movies or music.

If a video CD has “Playback control” (PBC) written on

its disc, it means that particular scenes or information

can be selected for interactive viewing. Press this

button to use this feature.

6. PLAY

Starts playback of multimedia files or CDs.

Used for navigating and entering menus.

MENU CONTROL

BUTTONS

8. MUTE

Disables the sound during playback.

9. SUBTITLE

Changes the language of the DVD’s subtitles.

Used only in conjunction with the STEP button (25).

Steps back through a movie one frame at a time.

10. RESUME

Displays a screen where you can program the

playback of an audio CD.

11. PROGRAM

12. RANDOM

13. PREV/NEXT

Not used.

Skips to the previous or next chapter of a DVD/VCD

or track in the case of an audio CD, respectively.

14. SHUFFLE

15. SETUP

Shuffles music tracks for random playback.

Used for setting various options of the PhotoStorage.

Cycles through repeating of the current chapter/track,

repeating of the whole CD/DVD, and no repeat.

16. REPEAT

Marks the start (A) and end (B) points for repeated

playback.

17. REP A-B

18. EJECT

Ejects the disk.

Download from Www.Somanuals.com. All Manuals Search And Download.

Displays the DVD’s title screen where you can set

various settings such as language and sound

preferences. Use the MENU CONTROL buttons (7) to

navigate around the screen.

19. TITLE

Some DVD movies have images shot at different

camera angles. Use this to select which angle you

want to watch it from. This only works if there is an

angle mark on the DVD and you have selected “ON”

for angle mark in the GENERAL SETUP.

20. ANGLE

21. AUDIO

22. ZOOM

Selects the language for the DVD’s audio output.

Cycles through three zoom levels: 1.5x, 2x, 3x, and

zoom off.

Copyies (burns) files from the Flash Memory Card to

the CD-RW.

23. COPY

24. STOP

25. STEP

Stops the playback of movies or music.

Steps through a movie one frame at a time. Press

PLAY (6) to resume normal play.

Cycles through 1/2x, 1/4x, and 1/8x of normal

playback speed.

26. SLOW

27. GO TO

28. L/R

Skips to a desired chapter.

Not used.

Cycles through 2, 4, 6, and 8 times normal playback

speeds for fast reverse and fast forward respectively.

29. FR/FF

VOLUME

30.

Controls the volume level.

CONTROLS

Displays a menu for playing a DVD and obtaining the

playback status.

31. MENU

32. CLEAR

Deletes numbers for GO TO play, repeated play,

programed play and security codes.

NUMBER

33. BUTTONS

(0 ~ 9, 10+)

Selects a track or menu/submenu.

Download from Www.Somanuals.com. All Manuals Search And Download.

The following descriptions show how to make the various connections.

Connecting the Power

Plug the DC power adaptor into a wall socket then connect the DC power adap-

tor to QuattroDrive

socket as shown in the diagram.

Standalone Connection

Without any connections, QuattroDrive can only be used for burning CD-CD-RW

as a way to back up your files from a flash memory card.

Connecting to Headphones or a Stereo System

There are two ways in which you can make a connection for listening to music.

•

Connect your headphone cable into the

QuattroDrive.

socket on the

•

Connect the audio cable from the

to the audio input sockets on your stereo.

socket on the QuattroDrive

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a TV or Projector

Follow these steps to connect the QuattroDrive to a television or projector.

1. Connect the audio cable (red and white plugs) from the

socket to

the audio IN socket of your TV or stereo system.

2. Connect the AV cable (yellow plug) from the QuattroDrive

socket to

the

socket of the TV or projector.

Video in

Audio in

The audio cable leading to the QuattroDrive has two black bands on the

connector; the video cable has only one black band on the connector.

Connecting to a Computer

Follow these steps to connect the QuattroDrive to a computer

1. Connect the USB cable from the QuattroDrive USB port to the USB port on

the back of the computer.

2. A “New hardware found” screen appears. Follow the instructions on the

screen and restart your computer when prompted.

If you have Windows 98, you will need to install the drivers as described in In-

stalling Drivers on page 7.

Once the drivers have been installed, a CD drive icon and up to three removable

hard drive icons will appear in

on the desktop.

Download from Www.Somanuals.com. All Manuals Search And Download.

QuattroDrive supports a number of different card types. The following instruc-

tions explain how to insert a Flash Memory Card.

1. Position the Flash Memory Card in the direction shown in the diagram.

CompactFlash

1GB

ID 16MB

2. Make sure that the card is being inserted into the correct slot.

•

Left slot is for MS, MS Pre, MS Duo, SD and MMC cards

Middle top slot is for CF and MD cards

Middle below slot is for SM cards

3. Making sure that the card is oriented correctly – all cards will have a direc-

tion arrow indicated – push the card in until it locks in place. A slight

amount of resistance will be felt as the card is seated. This is normal.

To remove a Flash Memory Card, grasp the end firmly between your thumb and

index finger and pull the card from the slot.

Only one Flash Memory Card can be used at any one time.

1. Press the eject button at the front of the QuattroDrive.

CD-R/W LED

Eject Button

2. Insert or remove a CD/DVD from the QuattroDrive and close the drive.

Download from Www.Somanuals.com. All Manuals Search And Download.

To turn on the QuattroDrive:

1. Make the appropriate connections as described in Getting Started on

page 4.

2. Push the

button for about two seconds. The front LCD

panel lights up and if connected to a TV or projector, the main screen

appears.

For Windows 98SE and ME, you will need to install the Card Reader and CD-

RW drivers.

1. Connect the QuattroDrive to the computer as described in Connecting to a

Computer on page 5.

2. Insert the supplied

driver CD into the

CD-ROM drive. The

following screen is

displayed.

3. Click

and follow

the instructions on

the screen.

4. Click

and fol-

low the instructions

on the screen.

For Mac OS X, refer to the mac_installation.pdf file located in the

Mac_Installation directory of the Driver CD for installation instructions.

Download from Www.Somanuals.com. All Manuals Search And Download.

This section describes the different settings within the Setup Menus.

Navigating the Menus

1. To bring up the

trol.

, press the

button on the remote con-

SHUFFLE SETUP

SETUP

REPEAT REP A-B CLEAR

2. In the

of the

, press the

and

buttons

on the remote control to select the desired submenu.

PLAY

COPY

ENTER

MUTE

STOP

3. Press the

menu.

button on the remote control to enter the selected sub-

4. In the submenu, press the

ting.

and

buttons to select the desired set-

5. Press the

button on the remote control to move across to the

options for that setting in the right column, as shown below.

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Press the

7. Press the

and

buttons to select the options for that setting.

button to confirm your option.

button to return to the submenu settings in the left col-

and press to return to the main menu.

To exit, press the

umn. Scroll down to

Scroll down to

and press

to exit the

Pressing the

button on the remote control at any time will also exit the

If an arrow appears at the top or bottom of the left menu button column, it means

there are more menus/options to choose from that aren’t displayed on the

screen.

Adjusting the TV Settings

To adjust the TV Settings:

1. Enter the

as described in Navigating

the Menus on page 8.

2. Enter the

and select

3. Select the TV type

required. Options are

, and

means that both

NTSC and PAL signals are

sent from the QuattroDrive

to the TV or Projector.

You will also need to know whether the source DVD is in NTSC or PAL

format before setting this option.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Return to the main menu and enter the

5. Scroll down to

6. Select the video output,

, that you will be connecting to on

the QuattroDrive. See Connecting to a TV or Projector on page 5.

Setting the OSD Language

To set the OSD language:

1. Enter the

2. Enter the

as described in Navigating the Menus on page 8.

and scroll down to

3. Select the desired language.

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETUP

has three options

for choosing the displays aspect

ratio.

•

– for

viewing on a normal

TV.

– for

viewing similar to that

of a movie at the

theater. This is best

used on a normal TV.

There will be two

black sections at the top and bottom of the screen.

– This is similar to NORMAL/LB but meant for widevision televi-

sions. If played on a normal television, the whole TV screen will dis-

play a picture but the sides will be cut off.

has three options.

•

– automatically chooses the best resolution for the unit being

displayed on.

•

– for high resolution picture mode.

– for non-flicker picture mode.

can be turned on or off. It is used to allow for viewing a movie

from different angles. This can only be used if the DVD movie has been filmed

from different angles.

For an explanation of

can be turned on or off.

For an explanation of

page 9.

, see Setting the OSD Language on page 10.

, see Adjusting the TV Settings on

Download from Www.Somanuals.com. All Manuals Search And Download.

SPEAKER SETUP

converts Dolby surround sound to normal stereo sound maintaining

a high quality sound.

•

– is used when the DVD has been recorded in DOLBY PRO-

LOGIC stereo.

– produces ordinary stereo sounds.

•

- turns off downmixing.

To enable the speaker options, set

to off and

as described in AUDIO SETUP on page 13.

Download from Www.Somanuals.com. All Manuals Search And Download.

AUDIO SETUP

has three options

•

– This is normally used with speakers.

– Select this if the surround sound is output through or

coaxial cables.

– Select this if the surround sound is output through or

coaxial cables (pulse code modulation).

•

has two options.

•

– This is used in most cases.

– Select this option when headphones are used.

Download from Www.Somanuals.com. All Manuals Search And Download.

– Can only be with Dolby Digital disks that have dual mono soft-

ware encoded in them. You can select one of the following options:

, or

– Move the slider to make your selection.

– Set this as

Download from Www.Somanuals.com. All Manuals Search And Download.

– Select 48K or 98K as the digitizing speed for LPCM. This is

an uncompressed format for audio.

PREFERENCES

For an explanation of

, see Adjusting the TV Settings on page 9.

DVDs may contain a number of

different languages for

and

Setting these options automati-

cally selects the languages to

be used by the DVD if those lan-

guages are contained within the

DVD itself.

contains an

also

option.

is used to select the

country you’re in.

and

are used together to set the age restriction for preventing children from watching

violent or sexual scenes. To change or set up a new parental password, follow

the steps below.

1. Go to

, select

press

and

on the remote con-

trol.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Enter the old four digit password code using the number buttons on the

remote. For a new machine, the default is 3308.

3. Enter the new four digit password code and then enter it a second time.

4. Set an appropriate restriction from the

list.

5. Upon setting a restriction, a Password Verification Page is displayed. Enter

the 4 digit password and press

Download from Www.Somanuals.com. All Manuals Search And Download.

The

list is the MPAA ratings and their definitions are listed in the fol-

lowing table.

GENERAL AUDIENCES

Suitable for all ages.

PARENTAL GUIDANCE

SUGGESTED

Some material may not be

suitable for children.

PARENTS STRONGLY

CAUTIONED

Some material may be

inappropriate for children

under 13.

PG-13

Age base

RESTRICTED

Under 17 requires

accompanying guardian or

parent

NC-17

NO ONE 17 OR UNDER ADMITTED

NO ONE 18 OR UNDER ADMITTED

ADULT

When a DVD is played with a rating of that set in

or higher, the

password verification screen, shown in step 5, is displayed.

Enter the correct password using the number buttons on the remote control.

Select

to reset the settings back to factory settings.

setting will enable you to view files on

Selecting

for

Flash Memory Cards or CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

DISC SETUP

This page is used to set various CD-RW functions for burning (writing) a CD.

is used to

erase a CD-RW before burning.

has three op-

tions.

– burns to the

CD.

– simulates a burn

to the CD but does not actually

perform an actual burn.

– burns to the

CD and then verifies the data.

There a two ways to switch between a Flash Memory Card and a CD.

Using the Remote Control

This method is normally used when the QuattroDrive is connected to a TV or a

projector.

Press the

used.

button on the remote control. The

button can also be

MODE

OSD

PBC

ANGLE

ZOOM

TITLE

MODE

PAUSE

AUDIO

The OSD will display

in the top left corner.

Using the Buttons on the QuattroDrive

This method is used for when you are on the road and a TV or projector is not

available.

1. Press the STOP/ESC button on the QuattroDrive to bring up the menu in

the LCD panel.

2. Press the PREV and NEXT buttons to switch

between

3. Press the ENTER/PLAY button to switch to the

desired media storage type, copy files to a

CD-R/W or erasing a CD-RW. See Writing (Burn-

ing) Files to a CD on page 26 for details on the

copy and erase functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Copying from a Flash Memory Card

1. Connect the QuattroDrive to the computer as described in Connecting to a

Computer on page 5.

Once connected, a CD drive icon and up to three removable hard drive

icons will appear in

on the desktop.

2. Open the removable hard drive that contains the Flash Memory Card data.

3. Copy the files across to the computer as you normally would.

Files can also be copied to a Flash Memory Card in the same way.

Copying from a CD

1. Make connections as described in Connecting to a Computer on page 5.

Once connected, a CD drive icon and up to three removable hard drive

icons will appear in

on the desktop.

2. Open the new CD drive icon.

3. Copy the files across to the computer as you normally would.

The QuattroDrive can be used as a portable CD or MP3 player all rolled into

one.To listen to music, follow the steps below.

1. Make connections as described in Connecting to Headphones or a Stereo

System on page 4.

2. Insert a music CD or a Flash Memory Card containing MP3 files or other

music file formats as described in Inserting and Removing a CD on page 6

or Inserting Flash Memory Cards on page 6 respectively.

3. Switch to the correct media storage type as described in Switching

between Flash Memory Cards and a CD on page 18.

4. Press the

button on the QuattroDrive to start playback.

PLAY

PREV NEXT STOP

Press

playback.

during playback to pause and then

to stop playback.

again to continue with

Press

and

buttons to go to the previous or next tracks respectively.

Download from Www.Somanuals.com. All Manuals Search And Download.

To be able to use other functions effectively, such as repeat, program and so on,

you will need to connect it to a TV as described in Connecting to a TV or Projec-

tor on page 5. See Playing a VCD or DVD on page 23 for other functions.

To view pictures, you will first need to:

1. Make connections in Connecting to a TV or Projector on page 5.

2. Refer to Switching between Flash Memory Cards and a CD on page 18 to

switch to the correct media storage type where the files are stored.

View files when

option is set for

as described in

PREFERENCES on page 15, is easier than with

Viewing files with the SMART NAVI Menu

1. After setting

and exiting

from the setup

menu, the following

screen will then

appear.

2. Navigate through

folders and select

files as described in

Navigating the

Menus on page 8.

Pressing a number

on the remote

control’s number

pad will also select that file or folder.

If you are in a sub folder, the top right menu item will be

go back to the previous folder.

which means to

Selecting an audio or movie file will play that file. See Listening to Music on

page 19 and Playing a VCD or DVD on page 23 for more information about

these types of files.

3. Use the left and right buttons on the remote control to rotate the image 90 .

Use the up and down buttons to mirror the image on the horizontal axis.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Press

button to exit.

PLAY

COPY

ENTER

MUTE

STOP

Viewing files without the SMART NAVI Menu

1. Press the button until

is displayed on the OSD.

SHUFFLE SETUP

SHUFFLE

REP A-B

REPEAT

CLEAR

2. Press

the following thumb-

nail screen will

appear.

and

3. Press a number but-

ton on the remote

control and the cor-

responding picture

will be displayed.

If slide show is not

set to

, the

pictures will be dis-

played otherwise it

will display the pic-

tures as a slide show.

4. Use the left and right buttons on the remote control to rotate the image 90 .

Use the up and down buttons to mirror the image on the horizontal axis.

5. Press

button to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Slide Show

1. Bring up one of the two screens as described in the previous two sections,

SMART NAVI and thumb nail screen.

2. Press the

button to cycle through a number of different slide

show effects as shown in the table below.

No special effects (default)

Wipe from top to bottom

Wipe from bottom to top

Wipe from right to left

Wipe from left/right to center

Wipe from center to left/right

Wipe from edge to center

Wipe from top/bottom to

center

Wipe from center to top/

bottom

Horizontal blinds

Random

Vertical blinds

Wipe from left to right

3. Press

on the remote control to start the slide show.

, a single picture will be displayed otherwise it

If slide show is set to

will display the pictures as a slide show.

4. Use the left and right buttons on the remote control to rotate the image 90 .

Use the up and down buttons to mirror the image on the horizontal axis.

5. Press

button to stop the slide show.

PLAY

COPY

PLAY

ENTER

MUTE

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

To play a VCD or DVD:

1. Connect the QuattroDrive as described in Connecting to a TV or Projector

on page 5.

2. Press the eject button at the front of the QuattroDrive.

3. Insert a VCD or DVD into the QuattroDrive and close the drive. The DVD

should automatically start playing.

4. A DVD’s audio, subtitle, and menu will automatically be set depending on

the available languages on the DVD and the settings as described in

PREFERENCES on page 15.

Basic Functions

Other functions that are available while playing a movie are:

•

– Cycles through the elapsed and remaining times for both title

and chapter.

– Displays the movie from a different camera angle. Only

available on DVDs that have been recorded with different camera

angles and

, indicated by

in the top right corner of

the OSD, has been turned on as described in GENERAL SETUP on

page 11.

•

– Displays the title of the DVD movie.

– Pauses playback of a multimedia file. Press this again to

continue playback or press the

button.

•

– If a video CD has “Playback control” (PBC) written on its disc, it

means that particular scenes or information can be selected for inter-

active viewing. Press this button to use this feature.

– Cycles through three zoom levels: 1.5x, 2x, 3x, and zoom off.

Does not work with audio.

•

– Cycles through the DVD’s available audio languages.

•

– Starts playing a

PLAY

COPY

multimedia CD/file or

continues

playback

after pausing.

•

–

ENTER

Selects a menu item in

a DVD menu.

MUTE

STOP

– To choose an

item on the DVD menu.

Begins playback if the

main QuattroDrive screen is being displayed.

– Disable the sound during playback.

•

– Stops playing the multimedia CD or file.

SUBTITLE RESUME

SLOW

L/R

STEP

PROGRAM

RANDOM

GOTO

•

– Cycles through the DVD’s available subtitle languages

during playback.

– Works only in conjunction with the

backward a frame at a time.

– Cycles through 1/2x, 1/4x, 1/8x of normal playback speed in

both a backward and forward direction and then back to normal play-

back speeds.

button and steps

•

– Used to step through a frame at a time. Doesn’t work with

audio. Press the

playback.

buttons to continue with normal

SHUFFLE SETUP

REP A-B

REPEAT

CLEAR

•

– Skips to the previous or next chapter of a DVD/VCD or

track in the case of an audio CD, respectively

– Cycles through 2, 4, 6, and 8 times normal playback speeds

for fast reverse and fast forward respectively.

– Sets a random sequence for playing audio files or CDs.

Press this until

– These are the volume controls.

– Clears repeated tracks/titles, randomized tracks and pro-

gramed tracks.

appears in the top left corner of the OSD.

•

– Displays the DVD’s main menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Playing Order of Audio or Video CDs

To program the playing order of audio CDs, video CDs and other multimedia

files, follow the steps below.

1. Play the audio or video CD/file as normal.

2. Pause playback.

3. Press

on the remote control.

SUBTITLE RESUME

SLOW

L/R

STEP

PROGRAM

RANDOM

GOTO

PROGRAM

4. PROGRAM 00 : 0000 appears on the screen. Type in the tracks/chapters

that you want to play in order.

Going to a Particular DVD Chapter.

1. Press the

button on the remote control.

SUBTITLE RESUME

SLOW

L/R

STEP

PROGRAM

RANDOM

GOTO

The screen to the right will

appear.

2. Press the left or right arrow

buttons on the remote con-

trol to select

and

enter the number using the

number buttons.

3. Press the left or right arrow

buttons again to select

and use the

number buttons to go to

the desired chapter.

4. Pressing the

button

twice will bring up a time

screen where you can

enter a time frame to go to

instead.

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeating Chapters/Tracks

Press the

tracks.

button on the remote control for repeating chapters or

SHUFFLE SETUP

REP A-B

REPEAT

CLEAR

For DVDs, this will cycle through

and

. The current chapter or title will be repeated.

For music,

tracks.

will repeat the current track while

will turn of repeating of tracks.

will repeat all

The

button is used for repeating between several titles or tracks.

SHUFFLE SETUP

REP A-B

REPEAT

CLEAR

1. Press the

button to set the start position. The

message will be displayed.

2. Continue playing as normal until the desired end position and press

button again. The message will be displayed.

3. Press the button once again to cancel repeated playback.

Files can be written to a CD-R or CD-RW, which is known as burning, as a way

of backing up files. With a CD-RW, multi-session CDs are created enabling you

to write to the CD as many times as you like.

Writing from a Flash Memory Card

There are two methods which you can use to write from a Flash Memory Card to

a CD-RW.

When the QuattroDrive is connected to a TV/projector, follow the steps below.

1. Insert the Flash Memory Card as described in Inserting Flash Memory

Cards on page 6.

2. Set up the disk burning options as described in DISC SETUP on page 18.

3. Insert a CD-RW or a blank CD-R into the QuattroDrive as described in

Inserting and Removing a CD on page 6.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Press

on the remote control to start burning files to the CD.

PLAY

COPY

ENTER

MUTE

STOP

5. Wait until the

message appears on the screen and

the CD-R/W LED stops flashing before removing the CD.

When the QuattroDrive is not connected to a TV/projector, follow the steps be-

low.

1. Insert the Flash Memory Card as described in Inserting Flash Memory

Cards on page 6.

2. Insert a CD-RW or a blank CD-R into the QuattroDrive as described in

Inserting and Removing a CD on page 6.

3. Press the STOP/ESC button on the QuattroDrive to bring up the menu in

the LCD panel.

4. Press the PREV and NEXT buttons until

appears in the LCD panel.

5. Press the ENTER/PLAY button to begin copying to the CD-RW. A number

will appear showing the percent left to be copied as shown in the diagram.

Wait until the

message or an error message (see Error Codes on

page 29) appears before continuing.

6. Press the STOP/ESC button to get back to the main menu and again to

exit.

Ensure that

is not set to

as described in

DISC SETUP on page 18, before disconnecting from the TV/projector,

otherwise files will not be burnt to the CD-R/W.

Files are placed in a directory called

with a consecutive number following.

For example, files from your first burn will be placed in a directory called

files from your second burn will be placed in a directory called

on.

and so

Download from Www.Somanuals.com. All Manuals Search And Download.

Disk Spanning

The QuattroDrive supports disk spanning which means, when burning files from

a Flash Memory Card to a CD-RW and the CD-RW becomes full, the Quattro-

Drive will prompt you to insert a new CD-RW. After Inserting a new CD-RW,

burning will automatically continue. This can be done up to four times in one

burning session.

Writing from the Computer

1. Connect the QuattroDrive to a computer as described in Connecting to a

Computer on page 5.

2. Use Nero ROM burning software or other burning software as you normally

would.

Erasing a CD-RW

There are two methods which you can use to erase a CD-RW.

When the QuattroDrive is connected to a TV/projector, follow the steps below.

1. Insert a CD-RW as described in Inserting and Removing a CD on page 6.

2. Select the

page 18 and select

3. Wait until

menu item as described in DISC SETUP on

message appears on the screen and the

CD-R/W LED stops flashing before continuing.

When the QuattroDrive is not connected to a TV/projector, follow the steps be-

low.

1. Insert a CD-RW as described in Inserting and

Removing a CD on page 6.

2. Press the STOP/ESC button on the QuattroDrive

to bring up the menu in the LCD panel.

3. Press the PREV and NEXT buttons until

appears in the LCD panel.

4. Press the ENTER/PLAY button to enter this menu

and

5. Press the ENTER/PLAY button to begin erasing

the CD-RW and will appear again. Wait

until the message or an error message (see

will appear.

Error Codes on page 29) appears before continu-

ing.

6. Press the STOP/ESC button to get back to the

main menu and again to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

This table lists the error codes that are displayed in the PhotoStorage’s LCD

panel when there is an error.

01 NO DISC

09 WRITE DVD ERROR

10 CD NOT ERASABLE

11 ERASE FAIL

02 NO FLASH CARD

03 READ FLASH CARD ERROR

04 BUFFER ERROR

05 CD CLOSED

12 DEVICE NOT READY

13 VERIFY READ FLASH

ERROR

06 NOT ENOUGH FREE SPACE

07 WRITE FAIL

14 VERIFY READ DISC ERROR

08 WRITE PRE-GAP ERROR

RESET CVBS NTSC:

1. SETUP ; press SETUP key one time

2. ꢀ*3

; press ꢀkey three time

3. ENTER ; press ENTER key one time

4. ꢀ*7

; press ꢀkey seven time

; press ꢁkey one time

ꢁ

6. ENTER ; press ENTER key one time

7. SETUP ; press SETUP key one time

SET PAL:

1. SETUP ; press SETUP key one time

2. ꢀ*3

; press ꢀkey three time

3. ENTER ; press ENTER key one time

ꢁ

; press ꢁkey one time

5. ꢀ*2

; pressꢀkey two time

6. ENTER ; press ENTER key one time

7. SETUP ; press SETUP key one time

Download from Www.Somanuals.com. All Manuals Search And Download.

Quantum High Chair 1650 User Guide
Radio Shack Work Light BTX 123 User Guide
Ricoh Webcam WG 4 GPS User Guide
RIDGID Drill R82001 User Guide
Roland Electronic Keyboard AT 80S User Guide
Roland Printer PNC 900 User Guide
RotoZip Grinder RZ User Guide
Saleen Automobile Accessories 10 8002 C11670C User Guide
Sanyo Digital Camera VPC T1284 User Guide
Senario Video Game Controller 21105 User Guide