of
Re:connect
M 219
Additional
room amplifier
Dominating Entertainment.
Revox of Switzerland.
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
M219
Additional room
amplifier
General
You should avoid installing it in
locations where:
The M219 is a digital Additional
Room Amplifier from the newest
M Series in the REVOX Multiroom
programme. It is used for the
reproduction of music in the
additional rooms in a Multiroom
system and can also supply the
listener with current information
through an additional display.
The M219 receives the signals
from a selected source (CD,
Tuner, Server ...) in the main
room through a multiroom bus
cable. Volume, balance, bass
and treble settings can be made
in individually in each room.
Also, up to 3 local sources can
be connected and listened to in
each additional room. If you
want “concealed” operation,
various wall-mounted
-
-
-
-
there is direct sunlight
it is next to a heat source
there is poor ventilation
there is a lot of dust in the
atmosphere
-
-
-
it is unstable
there is a risk of splashing
there is high humidity
Furthermore you may not place
objects filled with liquids, such
as vases, or naked flame
sources, such as lighted
candles, on the M219.
Stacking several M219s
If you want to stack several
M219s on top of each other, we
recommend that you use the
corresponding installation kit,
with the Part no. 1.551.313.00.
controllers or IR receivers can
be connected.
Installation
M219 Room-Amplifier
M219 Room-Amplifier
M219 Room-Amplifier
The M219 should be installed in
such a way that the ventilation
slots are not covered up and so
that there is a gap of at least 5
cm ( ≈ 2 in) between the unit
and any walls or furniture.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
Safety
Installation and operation
Please take note of the
Please check the unit and
accessories for any signs of
transit damage, once you have
unpacked it. Please read the
operating instructions carefully
before starting to use the unit.
Keep the documentation
somewhere safe for future
reference.
information shown on the labels
on the rear of the unit. Housings
should not be removed, in order
to avoid the danger of an
electric shock. Maintenance and
repairs should only be carried
out by qualified personnel.
If the unit shows any signs of
damage or has come into
contact with any fluids should
not be connected to a power
supply.
This symbol warns of
“dangerous voltages” within the
unit. In the case of contact with
the corresponding components,
the level of voltage can cause
an electric shock.
Only use the power cable
supplied. Before connecting the
power, the power supply and
unit connection values (power
voltage, frequency) must be
checked. The fuse used in the
unit must conform to the factory
definitions contained in the
“Technical data” section of this
manual.
!
This symbol indicates important
advice for operation and
maintenance in this
documentation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
Safety measures
Warranty
Operational anomalies
In the case of any unusual
noises or smells coming from
the unit, remove the power
cable immediately. Have the
unit checked as soon as
possible by your supplier.
Device regulations
REVOX offers a warranty in
EU/EEA countries on products
bought within the EU, in
addition to the statutory
warranty provided by the
retailer. The warranty covers
material and labour during the
period of the warranty, which is
stipulated in the individual EU
countries by the REVOX Sales
Partners.
Do not open the unit
The unit should not be opened
because of the risk of
electrocution.
In all countries, the terms of
warranty from the REVOX
Periods of non-use
reseller is offered in addition to
the statutory regulations. You
must be able to prove that the
product was bought from an
approved REVOX Partner when
making any warranty claim.
If the unit is not going to be
used for a longer period of time,
the power cable should be
unplugged from the socket as a
safety precaution.
The warranty is invalidated if
any inappropriate or
unprofessional repairs have
been carried out on the unit.
Foreign objects
Fluids, flammables or other
foreign objects should not find
their way into any of the unit’s
openings as this can result in
breakdowns, fire or an electric
shock.
Power cable
Always pull the plug out of the
socket while holding the plug
housing and not the cable.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
M219- Front view
[A]
[B]
[C]
M219
Room-Amplifier
[A]
IR Sensor
[C]
Ventilation slots
The InfraRed sensor receives
signals from the remote control
or from any other IR control
devices, such as the PDAs for
the music server.
The ventilation slots on the front
and the top of the M219 must
always be left clear of
obstructions.
Switching the IR sensor off
If required, the IR sensor can be
switched off using the SETUP
DIL switch [3] on the rear of the
M219.
The M219 should be installed in
such a way that the ventilation
slots are not covered up and so
that there is a gap of at least
5cm between the unit and any
walls or furniture.
[B]
Status LED
The blue status LED gives information about the current state of the
M219.
LED display
Permanently dark
Permanently lit
Rapid flashing
Rapid flashing
M219 Status
M219 standby mode
M219 active
Breakdown, overload
Min/max position reached
(Volume, Bass, Treble, Balance)
IR receive (RC5 or RC6 Codes)
LOCAL 1 or general change of source
LOCAL 2
Slow flashing
Single flash
Double flash
Triple flash
LOCAL 3
5
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
Connection plan
Rear view
[1]
[2]
[3]
[4]
[5] [6]
M219
LINK
OUT
PRE
OUT
SETUP
LOCAL IN
2
-
-
+
IN
+
3
1
1
2
3
4
5
6
7
8
L
R
3
1
2
4
FUSE
AC - POWER
CHANNEL
SELECT
OUT
IN
+
R -
-
L
+
MR-BUS
SPEAKERS
[7]
[8]
[9]
[10]
[11]
[12]
Short descriptions
[7] Stereo/ Mono switch
[8] Multiroom Bus input
[9] Multiroom Bus output
[10] Speaker connections L/R
[11] Fuse
[1] Local Cinch inputs L/R
[2] Preamp outputs L/R
[3] DIL setup switches
[4] M219-Link display connector
[5] IR receiver or wall-mounted
remote control connections
[12] Power connection
[6] Switching voltage input
6
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
Detailed descriptions
[1]
LOCAL IN 1 2 3
[2]
PRE OUT
Local Cinch inputs L/R
Preamp outputs L/R
The M219 has 3 local line
Using the M219s preamp
outputs, additional output
devices can be supplied, or the
REVOX digital speakers can be
operated through the REVOX
DLC-2.
The configuration of this audio
output is described in detail on
Page 9.
inputs for a CD player, video
recorder or TV, for example,
which are located directly in the
room where the M219 is. The
local audio inputs are activated
by the Local key on the (wall-
mounted) remote control. You
can scroll through a loop of the
local inputs by repeatedly
pressing the Local key:
[3]
SETUP
DIL Setup switches
(Local 1
(Local 2)
(Local 3)
The basic settings of the M219
are configured through these
DIL setup switches.
The number of active inputs that
are actually used can be set
through Setup DIL switches 4 &
5. This saves you unnecessary
scrolling through non-active
inputs. If, for example, only
inputs 1 and 2 are used, you
can set the switches so that you
only have to scroll through
1 2 3 4 5 6 7 8
Important
Configuration can only be
carried out through the setup
switches when the M219 is
disconnected from the power
supply. Otherwise, the new
settings are not activated.
Inputs 1 & 2. Input 3 is skipped.
The function of each individual
switch is described on the next
page.
ꢀ
7
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
DIL setup switches
NO
1
Function
Factory setting
M219 IR eye on/off
Pre-Out: Fixed Volume
LOCAL IN 1 ꢁFixed Volume
Number of local inputs
Number of local inputs
M219 address
On
Off
Off
On
On
Off
Off
Off
2
3
4
5
6
7
M219 address
8
M219 address
Please note:
The switch is in the ON position when it is down
You can enter your own personal DIL switch settings in a table
included on the last pages of this manual, providing you with a record
for future reference.
M219 infrared receiver
In some cases, e.g. in buildings with glass internal walls, it can be
useful to switch the M219 IR receiver off, in order to avoid
operational conflicts with other devices.
DIL switch
1
DIL position
IR Function
IR - Off
Off
On
1
1
IR - On
8
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
(2) PRE OUT
Two operating modes are possible with the M219’s preamp output:
Floating Volume (Factory setting from serial # 2000):
This is the standard mode setting. In this case, the PRE OUT level
changes parallel to the speaker level. This means that as you increase
the volume at the speakers, for example, the PRE OUT level is
automatically changed at the same time.
Application: You should select Floating Volume mode if, for example,
and additional output device or an active subwoofer is
connected, whose volume should also be controlled by
the M219. This means that the M219 speaker output
remains active.
Fixed Volume:
In this mode, the volume control and the M219 output devices are
deactivated, i.e. the volume cannot be controlled by any wall-mounted
or infrared remote control. The speakers connected to the M219 remain
silent. Irrespective of whether it is addressed through the multiroom bus
or a local input (Local IN 1 2 3), each source has a standard level, the
so-called Line Level.
Application: The Fixed Volume mode has been conceived principally
for applications where digital REVOX speakers are to be
connected to the M219 over a DLC2 interface.
DIL switch
2
DIL position
PRE OUT
Floating Volume
Fixed Volume
Off
On
2
2
9
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
(3) Voltage input IN (from serial # 2000)
Using the voltage input IN on the M219, the local audio input LOCAL
IN 1 can be activated by the application of 5 – 24 VDC. This means that
as soon as the voltage is present at IN, the M219 switches on
automatically and selects the input LOCAL IN 1. When the voltage is
removed from input IN, the M219 switches off again automatically, as
long as no other source apart from LOCAL IN 1 was addressed.
With DIL switch (3), you can define whether the volume control is
handled by the M219 (Floating Volume) or the connected (TV) device
(Fixed Volume). With Fixed Volume, the M219’s volume control is
deactivated and the audio signal at LOCAL IN 1 is transmitted with a
fixed strength. In this way, volume control is carried out with the TV
remote control.
The volume control setting set by DIL switch 3 only has an effect on the
local audio input LOCAL IN 1. All other sources are unaffected and
operate normally.
DIL switch
3
DIL position
LOCAL IN 1
Floating Volume
Fixed Volume
Off
On
3
3
Application: Many devices output a voltage as soon as they are
switched on. If you connect the voltage output of such a
device with the IN voltage input on the M219 and the
audio output with the local audio input LOCAL IN 1, the
M219 will switch on automatically with the other device
and transmit the sound.
If your device doesn’t have a voltage output, you can
supply voltage to the input using a sensor-switch multiple
socket outlet (Master/Slave socket outlet) and a normal
plug-in power supply (5-24 V= / DC). Please refer to the
diagram on Page 11.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
Cabling: Voltage input IN
Audio
OUT
Local (audio)-source
e.g. TV
WITHOUT
switching-voltage output
Audio
OUT
5-24V
OUT DC
Local (audio)-source
e.g. SAT-receiver
+
-
WITH
switching-voltage output
M219
LINK
IN
PRE
OUT
SETUP
LOCAL IN
-
-
+
IN
+
1
2
3
1
2
3
4
5
6
7
8
ON
ON
L
115V / T1A L
R
1
2
3
4
CAUTION
RiSK OF ELECTRIC SHOCK
DO NOT OPEN
FUSE
AC - POWER
CHANNEL
SELECT
IN
OUT
+
R
-
-
L
+
230V / T0,5A L
MR-BUS
SPEAKERS
Please note: SCART sockets
Many devices such as SAT receivers, video recorders or DVD
players output a switching voltage through the SCART socket as
soon as they are switched on.
On a standard SCART socket, PIN 8 outputs the positive voltage (+)
and PIN 4 or 14 is the earth (-).
L
The principle of Master/Slave socket outlets
With this type of socket outlets, the control device (the TV in the above
example) is plugged into the master socket while all other devices are
connected through the slave sockets. As long as the master device is not
switched on, all slave sockets remain switched off. Once the master device is
switched on, all the slave sockets (the plug-in power supply in the above
example) are switched on at the same time.
In this way, you can “upgrade” any type of device to give it a switching-
voltage output.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
M219 local inputs
See description: [1] LOCAL IN 1 2 3
Number of local
inputs
DIL switch
4
DIL switch
5
DIL position
0
1
2
3
Off
Off
On
On
Off
On
Off
On
5
5
5
5
4
4
4
4
M219 addressing
If you want to control each M219 individually, to use the alarm function of
the M51 Timer, for example, it is necessary to assign each M219 its own
address. The maximum number of M219s is limited to 8 per zone.
All M219s must have different addresses within one zone as otherwise
there may be communication problems.
The revisal of a correct addressing is made in the Setup menu of the
M51, category Multiroom / Version. All attached devices (M219 and/or
M217) must be listed in the respective zone.
DIL switch
DIL switch
6
DIL position
DIL switch
Address
7
8
1
2
3
4
5
6
7
8
Off
Off
Off
Off
On
On
On
On
Off
Off
On
On
Off
Off
On
On
Off
On
Off
On
Off
On
Off
On
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
7
7
7
7
7
7
7
7
12
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
[4] M219-Link
[5] IR-LINK
Connection for IR receiver or
wall-mounted remote control
M217- Display connection
The external display M217 can
be connected to the M219-Link
connector, which can give the
listener basic information about
the current music programme.
If it is not possible or not
required that the M219 is
controlled directly with a remote
control, a wall-mounted remote
controller (e.g. M218) or and
external IR eye (MR-204) can
be connected to the IR-LINK
connector.
Connection to the IR receiver or
the wall-mounted remote
controller is made using a
screwable Phoenix plug
connector.
Connection is made using a
straight through (not crossed),
4-core telephone cable with an
RJ11 plug (6P4C-Modular)
connected to the M219 LINK
socket.
GND A B VCC
REVOX recommends the use of a
3-core, screened cable*
(microphone cable), where the
screening is used as an earth.
This cable may not be longer
than 40 meters. Please refer to
the label for the correct cabling:
+ ꢁPositive feed - VCC
Front view of RJ11 Connector
IN ꢁIR Signal -
Data
GND
- ꢁEarth -
the maximum number of IR
receivers per M219 is 5.
IR commands
* Comment
The M219 accepts all RC5 or
RC6 commands and carries out
those that are intended for it. All
others are transferred on to the
Multiroom central unit.
A 3-core cable with screening
is recommended. In this case,
no further cable would be
necessary if you added an
additional display at a later
stage.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
[6] IN Voltage input (from serial # 2000)
Using the voltage input IN on the M219, the local audio input LOCAL IN
1 can be activated by the application of 5 – 24 VDC. This means that as
soon as the voltage is present at IN, the M219 switches automatically to
LOCAL IN 1, irrespective of which source had been selected previously.
For further information please refer to DIL switch (3) / Page 10.
Please note:
The voltage input IN is galvanically isolated from the M219 with a
high-resistance (10kΩ) optical coupler. This stops any disturbances
from either side having any effect.
[7] CHANNEL SELECT
Stereo/ Mono switch
Using the Channel Select switch, you can adjust the operating mode of
the two music (stereo) channels, to the requirements of the room where
the M219 is installed. Three operating modes are available:
1) Stereo
The left music channel is reproduces through the left speaker
connector and the right channel through the right connector.
2) Inverse stereo
After installation, it can occur that the left and right speaker
connections have been inverted or that the sound picture is not
correct for the normal listening position. In this case, a quick
solution is offered with the Inverse stereo operating mode, which
inverse the assignment of the left and right speaker connectors.
3) Mono
If only one speaker is connected to the M219, or if the M219 is
controlling two speakers, each in a different room, you should select
the Mono operating mode. This means that each speaker receives
all the music information.
The configuration of the Channel Select switches is described on the
next page.
ꢀ
14
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
[7] CHANNEL SELECT
Configuration
DIL- 1
DIL- 4
Switch
DIL
Position
DIL- 2
Switch
DIL- 3
Switch
Operating
Switch
mode
Left channel
Right channel
Stereo
On
Off
On
Off
On
On
Off
On
On
On
Off
On
3
3
3
1
1
1
2
2
2
4
4
4
Inverse
Stereo
Mono
You can change the switch settings during operation if the volume
level is turned down low.
[8] IN REVOX MR-BUS
[9] OUT REVOX MR-BUS
Multiroom Bus input
Multiroom Bus output
Connection of the REVOX
Multiroom Bus cable, which is
connected to the Multiroom
central unit e.g. M51 MR
Module MKII.
Connection for a further M219,
which is connected with a
REVOX Multiroom Bus cable.
A maximum of 8 M219s can
be connected in this way.
Connection is made using a
screened and uncrossed
RJ45 cable.
Connection is made using a
screened and uncrossed
RJ45 cable.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
[10]
R – L SPEAKERS
[11]
FUSE
Fuse
Speaker connection
Always power the unit down
before replacing the fuse.
Always use a cable of a
sufficient diameter for
connecting your speakers to the
M219.
When replacing the fuse, always
one of the same type as shown
on the M219 rating label.
REVOX recommends:
up to 15 m:
up to 30 m:
over 30 m:
Ø 1.50 mm2
Ø 2.50 mm2
Ø 4.00 mm2
Other fuse types with
different power, voltage or
operational characteristics
can endanger your life and
damage the unit.
We recommend not to use
cables longer than 50, due to
the unavoidable loss of HiFi
reproduction.
The fuse holder can be
removed by pushing it in slightly
and then turning it in the
direction of the arrow.
Each individual speaker must
have an impedance of 4 Ω or
higher. You must ensure that all
cable strands are within the
screwable Phoenix connector
and that none of them come
into contact with any adjacent
connectors or the M219
[12]
AC-POWER
housing.
Power connection
You will only be assured of a
perfect stage-quality
reproduction if you ensure
correct polarity when
connecting. A wrong polarity will
not cause any damage to the
speaker or to the M219, but it
can result in imprecise and
diffused reproduction that is
weak in the base ranges.
Only use the REVOX power
cable supplied. You must also
ensure that the power supply
used delivers the voltage as
shown on the M219 rating label
(240V). If required, the M219
can be modified to work with
other voltages. This
modification should only be
carried out by an authorised
specialist.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
17
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
Multiroom cabling
Multiroom cabling uses a CAT 7
cable, in accordance with the
international network standard
EIA/TIA-568-B.
The CAT 7 cable is
characterised by 4 twisted pairs,
where each pair has its own
screening. There is a complete
screening around all four pairs.
This EIA/TIA-568-B standard
provides for the following
assignment:
Clamp
Colour code wh/or
MR-signal
RX
1
2
3
4
bl
5
6
7
8
or
wh/gn
L+
wh/bl
R-
gn
L-
wh/bn
GND
bn
MR
GND
TX
R+
Personal M219 Settings (DIL switches)
DIL setup switches
Room
1
2
3
4
5
6
7
8
Off
On
Off
On
Off
On
Off
On
Off
On
Off
Off
On
Off
On
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
X
X
X
X
X
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
e.g. Bedroom
X
X
X
18
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
Technical data
Amplifier part:
Music power:
2 x 50 Watt at 4 Ohm / 1% THD
2 x 25 Watt at 4 Ohm / RMS
10 Hz - 25 kHz / -3 dB
> 200 at 8 Ohm / 1 kHz
0.03 % at 10 Watt
Frequency range:
Damping factor:
Harmonic distortion:
General M219 data:
Power voltage:
230 V
115 V
Power fuse rating:
0.5 A
1 A
time-lag
time-lag
Power consumption:
Max.
Operation:
Standby:
115 Watt
7 Watt*
2 Watt
* at room volume without additional devices
Operating conditions:
(Humidity rating acc. DIN 40040),
“+10°... +40°C” / “+50°…+104°F”
Dimensions:
Weight:
Width: 225 mm
Height: 60 mm
Depth: 160 mm
(8.86 in)
(2.36 in)
(6.30 in)
2.4 kg
(5.3 lb)
Errors and technical modifications excepted.
Description: Version 0.90
19
Download from Www.Somanuals.com. All Manuals Search And Download.
M219 room amplifier
Re:connect
Guarantee
Delivered items
The guarantee period is 24
months from the date of
purchase.
ꢂ
ꢂ
ꢂ
M219 Multiroom amplifier
Power cable
1 RJ11 plug
Your dealer should be your first ꢂ
contact if you need service.
If he can't give you the help you
need, send the M219 carriage
free and without any
Operating instructions
accessories to your national
Sales Office.
Please supply a complete
description of the problem and a
full return postal address.
M219 Additional room amplifier Operating instructions / Part no.: 10.30.3017
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|