H5i™
heated humidifier
Welcome Guide
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you for choosing the H5i. Before operating this device,
please read the entire Welcome and Information Guides.
Flip lid
seal
Flip lid
Air outlet
Release
button
ClimateLine/
ClimateLineMAX
connection port
Latch
H5i at a glance
The H5i system comprises the following elements:
• H5i heated humidifier • H5i Cleanable water tub.
H5i
Cleanable
water tub
Optional components include:
• ClimateLine heated tubing • ClimateLineMAX heated tubing • H5i water tub.
Travelling tips
When moving or travelling with your H5i:
• Ensure that the water tub is empty.
• Disconnect the H5i from the S9 by using the release button.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
English
4
3
6
1
2
5
Setup
1. Align your H5i with your S9 and push them together until they click into place.
2. Connect the DC plug of the power supply unit to the rear of the S9.
3. Connect the power cord to the power supply unit.
4. Plug the other end of the power cord into the power outlet.
5. Connect one end of the air tubing firmly onto the air outlet.
6. Connect the assembled mask system to the free end of air tubing.
Notes:
•
•
•
Place the power supply unit away from the H5i to allow for adequate ventilation.
For more information on assembling your mask see your mask manual.
Support.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling the water tub
1. Slide the latch and lift open the flip lid.
2. Remove the water tub.
3. Fill the water tub (through the centre hole) with water
up to the maximum water level mark (380 mL).
4. Return the water tub to the H5i.
5. Close the flip lid ensuring that it clicks into place.
1.
2.
3.
4.
5.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
English
LCD screen
Home menu
Start/Stop button
Starts or stops
treatment.
Key:
Home
Humidity level
Ramp
Setup menu
Allows you to
make changes
to settings.
Heated tube
Climate
Control
Info menu
Allows you to
view your sleep
statistics.
Start/Stop
Push dial
Push dial
Turning the dial allows
you to scroll through
the menu and change
settings. Pushing the
dial allows you to
enter into a menu and
confirm your choice.
Setup menu
Info menu
S9 basics
The control panel of your S9 device includes an
LCD screen as well as a Start/Stop button, Push
dial and the Info and Setup menu keys.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting humidity level
Ranging from OFF to 6, you can adjust the humidity level at any time to find the setting that is most
comfortable for you. To adjust your level of humidity:
1. From your
2. Press
. The
3. Turn
until
4. Press
to
HOME screen,
turn until
the HUMIDITY
LEVEL screen is
displayed in blue.
selection is
highlighted in
orange.
the humidity level
that you require is
displayed.
confirm your
choice.
Warming the H5i
The warm-up feature is used to pre-heat the water before starting treatment.
To start warming:
1. Navigate to the humidity level icon.
2. Push and hold
for three seconds. The Warming Up status bar is
displayed.
You can stop warm-up at any time by pressing
for at least three
seconds. You can start treatment at any time by pressing
.
Note: In order to assist the heater plate in cooling, your S9 device will
continue to blow air for up to an hour after treatment has stopped. However,
you can unplug the device from the power outlet at any time and allow the
heater plate to cool without air flow.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Getting started
1. Make sure your S9 and H5i are connected and the water tub is
filled to the maximum water level mark.
2. Adjust the humidification level if required.
3. Fit your mask as described in your mask user guide.
4. To start therapy, simply breathe into the mask and/or press
5. Lie down and arrange the air tubing so that it is free to move if
you turn in your sleep.
.
6. To stop treatment at any time, remove your mask and/or press
.
Notes:
•
If your clinician has enabled SmartStart your device will start
automatically when you breathe into the mask and stop automatically
when you remove the mask.
Once therapy has started a treatment screen is displayed.
•
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and maintenance
You should regularly carry out cleaning and maintenance as described in this section.
Disassembling the H5i
1. Slide the latch.
2. Lift open the flip lid.
3. Remove the water tub.
4. Discard any excess water from the water tub.
5. Unclip all four side latches.
6. Pull apart the tub lid, plate and base.
1.
2.
3.
4.
5.
6.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Daily cleaning
1. Wash the disassembled tub lid, plate and base in warm water using a mild detergent.
2. Rinse thoroughly in clean water and allow them to dry away from direct sunlight.
Note:The disassembled tub lid, plate and base may also be washed in a dishwasher on the delicate
or glassware cycle (top shelf only).
Monthly cleaning
1. Peel the flip lid seal from the flip lid and wash it in warm water using a mild detergent.
2. Wipe the exterior of the H5i with a damp cloth and mild detergent.
Reassembling the H5i
1. Place the plate back onto the base ensuring that the maximum water level mark faces up.
2. Place the tub lid back onto the plate/base ensuring that the centre holes are aligned.
3. Clip all four side latches.
4. Fill the water tub and return the water tub to the H5i.
5. Close the flip lid ensuring that it clicks into place.
1.
2.
3.
4.
5.
Maintenance checklist
9
9
9
9
Inspect the water tub and flip lid seal for wear and deterioration.
Replace the water tub if any component is leaking or has become cracked, cloudy or pitted.
Replace the flip lid seal if cracked or torn.
Clean white powder deposits in the water tub by using a solution of one part household vinegar
to 10 parts water.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
368882/1 2012-11
H5i
WELCOME
EUR 1/3
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center
Boulevard San Diego CA 92123 USA.
ResMed locations worldwide.
H5i is a trademark of ResMed Ltd and is registered in U.S. Patent and Trademark Office.
© 2012 ResMed Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|