Renesas Switch M52757FP User Guide

M52757FP  
Wide Band Analog Switch  
REJ03F0195-0201  
Rev.2.01  
Mar 31, 2008  
Description  
The M52757FP is a semiconductor integrated circuit for the RGB interface. The device features switching signals input  
from two types of image sources and outputting the signals to the CRT display, etc. The frequency band of video  
signals is 250 MHz, acquiring high-resolution images, and are optimum as an interface IC with high-resolution CRT  
display and various new media.  
It includes Sync-separator, Video-signal-detector, and Sync-on G detector (SOG-DET.).  
Features  
Frequency band width: R.G.B  
Input level: R.G.B  
Video signal-detector  
Responsive frequency:  
Input level:  
250 MHz  
0.7 VP-P (Typ.)  
to 50 MHz  
0.7 VP-P (Typ.)  
Detected level:  
150 mV (Typ.)  
(Measure botto
Only the G channel is proved with buffer video outpu
It is possible to save the consumption current by st2, 4, 6, 20, 24, 30, 33, 35 because  
SOG-DET can be operated with only VCC5 (Pin
Include Sync Separation, Video signal detec.  
Application  
Display monitor  
Recommended Opera
Supply voltage range:  
Rated voltage:  
5 V  
REJ03F0195-0201 Rev.2.01 Mar 31, 2008  
Page 1 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M52757FP  
Absolute Maximum Ratings  
(Ta = 25°C)  
Item  
Supply voltage  
Symbol  
Ratings  
7.0  
Unit  
V
VCC  
Power dissipation  
Pd  
1068  
mW  
°C  
°C  
V
Operating temperature  
Topr  
Tstg  
Vopr  
Vopr'  
20 to +85  
40 to +150  
5.0  
Storage temperature  
Recommended operating supply voltage  
Recommended operating supply voltage range  
Electrostatic discharge  
4.75 to 5.5  
±200  
V
Sarge  
V
Thermal Derating (Maximum Rating)  
1250  
1068  
1000  
750  
500  
250  
0
25  
0
125  
150  
a (°C)  
REJ03F0195-0201 Rev.2.01 Mar 31, 2008  
Page 3 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M52757FP  
Electrical Characteristics  
(VCC = 5 V, Ta = 25°C)  
Limits  
Test  
Item  
Symbol  
Unit  
mA  
Point (s)  
Input  
SW18  
OPN  
OPN  
Min  
45  
3
Typ Max  
Circuit current 1  
ICC1  
5
65  
5
85  
7
A
Circuit current 2  
ICC  
mA  
15  
<RGB SW>  
Output DC voltage 1  
Output DC voltage 2  
Output DC voltage 3  
Output DC voltage 4  
Maximum allowable input 1  
Maximum allowable input 2  
Voltage gain 1  
Vdc1  
Vdc2  
Vdc3  
Vdc4  
VImax1  
VImax2  
Gv1  
1.1  
1.1  
1.5  
1.5  
0.9  
0.9  
1.6  
1.6  
0.5  
0
1.9  
1.9  
1.3  
1.3  
V
V
29, 32, 35  
29, 32, 35  
27  
OPN  
GND  
OPN  
GND  
GND  
GND  
GND  
0.5  
V
0.5  
V
27  
1.4  
VP-P  
VP-P  
dB  
dB  
dB  
dB  
dB  
dB  
1, 3, 5  
1, 3, 5  
7, 9, 11  
1, 3, 5  
1.4  
7, 9, 11  
29, 32, 35  
0.1  
0.6  
0.1  
0.6  
0.6  
0.6  
1.0  
1.0  
1.0  
1.0  
1.1  
0.6  
1.1  
0.6  
0.6  
0.6  
1.0  
1.0  
Relative voltage gain 1  
Voltage gain 2  
Gv1  
Gv2  
Relative to measured values above  
29, 32, 35 7, 9, 11 OPN  
Reto measured values above  
0.5  
0
Relative voltage gain 2  
Voltage gain 3  
Gv2  
Gv3  
0
3
9
GND  
OPN  
GND  
Voltage gain 4  
Gv4  
0
Freq. characteristic 1 (100 MHz) Fc1  
0
5  
Relative Freq. characteristic 1  
Fc1  
0
red values above  
, 9, 11 OPN  
measured values above  
Freq. characteristic 2 (100 MHz) Fc2  
0
Relative Freq. characteristic 2  
Fc2  
0
Freq. characteristic 1 (250 MHz) Fc3  
Freq. characteristic 2 (250 MHz) Fc4  
3.0
35  
32, 35  
9, 32, 35  
1, 3, 5  
7, 9, 11  
1, 3, 5  
GND  
OPN  
3.0
Crosstalk between 2 inputs 1  
(10 MHz)  
CTI1  
50  
50  
30  
30  
GD to OP  
Crosstalk between 2 inputs 2  
(10 MHz)  
CTI2  
5  
35  
40  
40  
25  
25  
B  
dB  
dB  
dB  
dB  
dB  
dB  
29, 32, 35  
29, 32, 35  
29, 32, 35  
29, 32, 35  
29, 32, 35  
29, 32, 35  
29, 32, 35  
7, 9, 11  
1, 3, 5  
OP to GD  
GD to OP  
OP to GD  
GND  
Crosstalk between 2 inputs 3  
(100 MHz)  
C
Crosstalk between 2 inputs 4  
(100 MHz)  
7, 9, 11  
1, 3, 5  
Crosstalk between chan
(10 MHz)  
C3  
CTC4  
Crosstalk between channel 2  
(10 MHz)  
7, 9, 11  
1, 3, 5  
OPN  
Crosstalk between channel 3  
(100 MHz)  
GND  
Crosstalk between channel 4  
(100 MHz)  
7, 9, 11  
OPN  
Pulse characteristic 1  
Tr1  
Tf1  
Tr2  
Tf2  
1.6  
1.6  
1.6  
1.6  
2.5  
2.5  
2.5  
2.5  
ns  
ns  
ns  
ns  
29, 32, 35  
29, 32, 35  
29, 32, 35  
29, 32, 35  
1, 3, 5  
1, 3, 5  
GND  
GND  
OPN  
OPN  
Pulse characteristic 2  
7, 9, 11  
7, 9, 11  
<SYNC SEP>  
Sync input min. level  
SYrv  
0.2  
4.5  
4.9  
0.2  
60  
VP-P  
V
25  
25  
25  
25  
25  
26  
26  
26  
26  
26  
Sync-sep output Hi level  
Sync-sep output Low level  
Sync-sep output delay time 1  
Sync-sep output delay time 2  
SYVH  
SYVL  
TdSf  
0.4  
V
ns  
ns  
TdSb  
60  
REJ03F0195-0201 Rev.2.01 Mar 31, 2008  
Page 4 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M52757FP  
Electrical Characteristics (cont.)  
Limits  
Typ  
Test  
Point (s)  
Item  
<SYNC DET>  
Symbol  
Unit  
Input  
SW18  
Min  
Max  
Min. detectable Sync amplitude  
Max. detectable Sync width  
Sync-DET output high level  
Sync-DET output low level  
Max. allowable input noise level  
<VIDEO DET>  
SDETrv  
SDETrt  
SDVH  
0.2  
4.0  
4.9  
0.2  
VP-P  
µs  
V
14  
14  
14  
14  
14  
3, 9  
3, 9  
3, 9  
3, 9  
3, 9  
4.5  
SDVL  
0.4  
V
SDETnv  
0.05 VP-P  
Allowable input DC range  
VDinV  
2.0  
2.4  
0.7  
2.8  
1.0  
V
19, 21, 23 19, 21, 23  
Allowable input amplitude range VDin  
VP-P 19, 21, 23 19, 21, 23  
Min. detectable input level  
Max. allowable input noise level  
Max. input pulse width  
VDETrv  
0.15  
VP-P  
VP-P  
ns  
17  
17  
17  
17  
19, 21, 23  
19, 21, 23  
19, 21, 23  
19, 21, 23  
19, 21, 23  
VDETnv  
VDETrt  
SDVH  
0.1  
10.0  
4.8  
0.7  
Video-DET output Hi level  
Video-DET output Low level  
4.2  
V
SDVL  
1.0  
V
REJ03F0195-0201 Rev.2.01 Mar 31, 2008  
Page 5 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M52757FP  
Package Dimensions  
JEITA Package Code  
P-SSOP36-8.4x15-0.80  
RENESAS Code  
Previous Code  
36P2R-D  
MASS[Typ.]  
0.5g  
PRSP0036GA-B  
36  
19  
F
NOTE)  
1. DIMENSIONS "*1" AND "*2"  
DO NOT INCLUDE MOLD FLASH.  
2. DIMENSION "*3" DOES NOT  
INCLUDE TRIM OFFSET.  
18  
1
Index mark  
*2  
D
Dimension in Millimeters  
Reference  
Symbol  
A1  
Min Nom Max  
D
E
14.8 15.0 15.2  
8.2 8.4 8.6  
2.05  
*3  
bp  
y
e
A2  
A
2.35  
0.1 0.2  
A1  
bp  
c
0
0.3 0.35 0.45  
0.18 0.2 0.25  
0°  
8°  
HE  
e
11.63 11.93 12.23  
0.65 0.8 0.95  
0.10  
F  
y
L
0.3 0.5 0.7  
REJ03F0195-0201 Rev.2.01 Mar 31, 2008  
Page 6 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan  
Notes:  
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes  
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property  
rights or any other rights of Renesas or any third party with respect to the information in this document.  
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,  
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.  
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass  
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws  
and regulations, and procedures required by such laws and regulations.  
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this  
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,  
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be  
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a  
result of errors or omissions in the information included in this document.  
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability  
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular  
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.  
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications  
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk uman injury or which require especially high quality  
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combntrol, aerospace and aeronautics, nuclear power, or  
undersea communication transmission. If you are considering the use of our products for such purposes, pleRenesas sales office beforehand. Renesas shall  
have no liability for damages arising out of the uses set forth above.  
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed
(1) artificial life support devices or systems  
(2) surgical implantations  
(3) healthcare intervention (e.g., excision, administration of medication, etc.)  
(4) any other purposes that pose a direct threat to human life  
Renesas shall have no liability for damages arising out of the uses set forth in the above and cts in any of the foregoing  
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated coployees against any and all  
damages arising out of such applications.  
9. You should use the products described herein within the range specified by Renesas, g, operating supply voltage range,  
movement power voltage range, heat radiation characteristics, installation and other no liability for malfunctions or damages  
arising out of the use of Renesas products beyond such specified ranges.  
10. Although Renesas endeavors to improve the quality and reliability of its productuch as the occurrence of failure at a certain  
rate and malfunctions under certain use conditions. Please be sure to implemssibility of physical injury, and injury or damage  
caused by fire in the event of the failure of a Renesas product, such as safeg but not limited to redundancy, fire control and  
malfunction prevention, appropriate treatment for aging degradation or an, since the evaluation of microcomputer software  
alone is very difficult, please evaluate the safety of the final products or
11. In case Renesas products listed in this document are detached from are attached or affixed, the risk of accident such as  
swallowing by infants and small children is very high. You should iproducts may not be easily detached from your products.  
Renesas shall have no liability for damages arising out of such d
12. This document may not be reproduced or duplicated, in any foapproval from Renesas.  
13. Please contact a Renesas sales office if you have any queshis document, Renesas semiconductor products, or if you have  
any other inquiries.  
RENESAS SALES OFFICE
Refer to "http://www.renesas.coiled information.  
Renesas Technology Amer
450 Holger Way, San Jos
Tel: <1> (408) 382-7500,
Renesas Technology Europ
Dukes Meadow, Millboard Roadamshire, SL8 5FH, U.K.  
Tel: <44> (1628) 585-100, Fax: <40  
Renesas Technology (Shanghai) Co.
Unit 204, 205, AZIACenter, No.1233 Lujiaing Rd, Pudong District, Shanghai, China 200120  
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898  
Renesas Technology Hong Kong Ltd.  
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong  
Tel: <852> 2265-6688, Fax: <852> 2377-3473  
Renesas Technology Taiwan Co., Ltd.  
10th Floor, No.99, Fushing North Road, Taipei, Taiwan  
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399  
Renesas Technology Singapore Pte. Ltd.  
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632  
Tel: <65> 6213-0200, Fax: <65> 6278-8001  
Renesas Technology Korea Co., Ltd.  
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea  
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145  
Renesas Technology Malaysia Sdn. Bhd  
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia  
Tel: <603> 7955-9390, Fax: <603> 7955-9510  
© 2008. Renesas Technology Corp., All rights reserved. Printed in Japan.  
Colophon .7.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pyramid Car Audio Stereo Amplifier PA1000X User Guide
Quasar Air Conditioner HQ2050PH User Guide
Radian Technologies Headphones VT R800 7040 00 User Guide
Raymarine GPS Receiver hsb2 PLUS Series User Guide
Roland Musical Instrument PCR 300 User Guide
Salter Housewares Stud Sensor IB 1015 0610 03 User Guide
Samsung Fax Machine SF 6800 User Guide
Sanyo Heat Pump APR P160BA User Guide
Sanyo Security Camera VCC MC700P User Guide
Sebo Chipper 90640AM User Guide