M38D59T-RLFS
Emulator MCU Board for 38D5 Group
User’s Manual
Keep safety first in your circuit designs!
ꢀRenesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.
Notes regarding these materials
ꢀThese materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.
ꢀRenesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
ꢀAll information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).
ꢀWhen using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.
ꢀRenesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
ꢀThe prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or
reproduce in whole or in part these materials.
ꢀIf these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
ꢀPlease contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the
products contained therein.
Precautions to be taken when using this product
ꢀThis product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing
integration test, evaluation, or some experiment else.
ꢀIn no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
ꢀRenesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.
ꢀThis product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
CAUTION
Rev.2.00
Nov. 01, 2005
(1/4)
REJ10J1014-0200
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Oscillator Circuit (See Figure 3)
This product has two oscillator circuit patterns for the main clock XIN and sub-clock XCIN.
Select one of them according to the oscillator circuitry of the user system.
(1) When using the internal oscillator circuit of the MCU:
The oscillator circuit on the user system may not oscillate because a converter board is used between the emulator MCU and the
user system. In this case, set the jumper switch to INT and mount an oscillator circuit on the M38D59T-RLFS’s oscillator circuit
pattern. When using the oscillator circuit on the user system, be sure to set the jumper switch to EXT.
(2) When using an oscillator module IC etc. (self-oscillation):
It is not necessary to mount an oscillator circuit on the M38D59T-RLFS’s oscillator circuit pattern.
TP2
TP3
TP1
GND
VCC RESET
+
C5
CN1,CN2
IC1
VCC
CN2-5a(VCC)
R1
RESET*
XOUT
CN2-2a(RESET*)
XCIN
XCOUT
XIN
CN2-3a(P60)
CN2-2b(P61)
CN2-4a(XIN)
CN2-4b(XOUT)
JP3
JP4
JP1
JP2
EXT
INT
EXT
INT
EXT
INT
EXT
INT
CN2-3b(VSS)
R3
R4
C4
R2
C2
C3
C1
X2
X1
Figure 3 Oscillator circuit diagram
6. Oscillator Circuit Pattern
JP1 XIN
INT
JP2 XOUT
INT
JP3 XCIN
JP4 XCOUT
INT
EXT
EXT
R2
INT
EXT
C3
EXT
X1
For 2-terminal oscillator
For 3-terminal oscillator
X2
R3
R4
C1
C2
C4
Figure 4 Oscillator circuit pattern
(3/4)
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Precautions
IMPORTANT
Notes on This Product:
ꢀWe cannot accept any request for repair.
ꢀWhen using the oscillator circuit on the M38D59T-RLFS, check the output waveform of pins Xout and Xcout by an
oscilloscope.
ꢀWhen mounting an oscillator circuit on the M38D59T-RLFS, make sure that 2 mm or more of a DIP pin does not
appear on the rear face (solder side). It may be short-circuited with the DIP pin of the converter board.
ꢀFor inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage
8. External Dimensions
64.0
R1
RESET
GND
VCC
+
C5
R6 R5
C6
Figure 5 External dimensions
9. Connecting to the User System
M38D59T- RLFS
80-pin 0.8-mm-pitch
PRQP0080GB-A (80P6N-A)
80-pin 0.8-mm-pitch
PRQP0080GB-A (80P6N-A)
80-pin 0.5-mm-pitch
PLQP0080KB-A (80P6Q-A)
M3T-F160-80LCC
(included)
M3T-F160-80NRA
(not included)
M3T-F160-80NSD
(not included)
LCC socket
(not incluede)
Figure 6 Connecting to the user system
(4/4)
Download from Www.Somanuals.com. All Manuals Search And Download.
|