PCA7441
PCA7442FPG02
PCA7442SP
PROM Programming Adapters for 4513, 4514, 4518, 4519, 4583 and 4584 Groups
User's Manual
Rev.1.00
July 1, 2003
REJ10J0188-0100Z
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 1. Precautions for Safety ...........................................................................................4
Chapter 2. Introduction...........................................................................................................6
2.1 Things to Check When Unpacking .......................................................................7
Chapter 3. How to Write Programs ........................................................................................8
3.1 Programming Procedures ......................................................................................8
3.2 Attaching the Adapter to a PROM Programmer ...................................................9
3.3 Inserting an MCU into the Adapter.......................................................................9
(1) For PCA7441 .............................................................................................9
(2) For PCA7442FPG02 ................................................................................10
(3) For PCA7442SP .......................................................................................10
3.4 Recommended PROM Programmers ..................................................................12
Chapter 4. Specifications ......................................................................................................13
4.1 Specifications ......................................................................................................13
4.2 Memory Maps .....................................................................................................14
Chapter 5. Troubleshooting ..................................................................................................15
5.1 Errors That Occur When Writing to PROM .......................................................15
(1) When Newly Purchased ...........................................................................15
(2) Previously Written Normally ...................................................................15
5.2 MCUs Do Not Function Normally......................................................................15
5.3 Other Precautions ................................................................................................16
(1) About the Recommended PROM Programmers ......................................16
(2) About Reading Out of Device Identification Code ..................................16
5.4 How to Request for Support................................................................................16
( 3 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Precautions for Safety
In both the user's manual and on the product itself, several icons are used to insure proper handling
of this product and also to prevent injuries to you or other persons, or damage to your properties.
This chapter describes the precautions which should be taken in order to use this product safely and
properly. Be sure to read this chapter before using this product.
If the requirements shown in the "WARNING"
sentences are ignored, the equipment may
cause serious personal injury or death.
WARNING
If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may
malfunction.
CAUTION
It means important information on using this
IMPORTANT
product.
In addition to the three above, the following are also used as appropriate.
means WARNING or CAUTION.
Example:
CAUTION AGAINST AN ELECTRIC SHOCK
means PROHIBITION.
Example:
DISASSEMBLY PROHIBITED
means A FORCIBLE ACTION.
Example:
UNPLUG THE POWER CABLE FROM THE RECEPTACLE.
The following pages describe the symbols "WARNING", "CAUTION", and "IMPORTANT".
( 4 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Warnings for Use Environment:
• This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care
should be taken that this temperature is not exceeded.
• Select the proper programming mode of the PROM programmer.
CAUTION
Caution to Be Taken for Modifying This Product:
• Do not disassemble or modify this product. Disassembling or modifying this product can cause
damage. Disassembling and modifying the product will void your warranty.
Cautions to Be Taken for This Product:
• Use caution when handling this product. Be careful not to apply a mechanical shock such as falling.
• Do not directly touch the connector pins of this product.
• Be careful with the static electricity when handling this product and the MCU.
Caution for Keeping This Product:
• When not using this product for a long time:
(1) Attach the connector pins of this product to the conductive sponge.
(2) Put it into a conductive polyvinyl, and keep it in the package case shipped from the factory.
(3) Store it in the place where humidity and temperature are low and direct sunshine does not
strike.
IMPORTANT
Note on This Product:
• We cannot accept any request for repair.
When Using This Product:
• Attach this product to the IC socket on the PROM programmer properly.
• Insert the MCU to the IC socket of this product properly.
• When opening and closing the IC socket of this product, be sure to keep it horizontal.
• Be sure to set the programming area as described in this user's manual.
• Do not use the PROM programmer's device identification code readout function.
( 5 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Introduction
This product is a PROM programming adapter for the 4513, 4514, 4518, 4519, 4583 and 4584 Groups
of 4-bit MCUs. This product is used to write programs into the internal EPROM of MCU with
commercially available PROM programmer. This manual mainly explains specifications of this
product and how to operate it. Figures 2.1 to 2.3 show the external view of the products and their
constituent parts.
Figure 2.1 External view of the adapter and constituent parts (PCA7441)
Figure 2.2 External view of the adapter and constituent parts (PCA7442FPG02)
( 6 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2.3 External view of the adapter and constituent parts (PCA7442SP)
2.1 Things to Check When Unpacking
This product consists of the parts listed in Table 2.1. When unpacking, check to see that it contains
all of the components.
Table 2.1 Package components
Main unit
PCA7441/PCA7442FPG02/PCA7442SP
PCA7414B
Interface unit
Connector
PCA7402D (28-pin)
This manual
User's manual
* If any part is missing or there is any doubt about your product package, contact your local
distributor.
( 7 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. How to Write Programs
This chapter describes procedures you need to follow when writing the program.
For details on how to operate the PROM programmer, refer to the user's manual of the PROM
programmer.
3.1 Programming Procedures
Follow the steps (1) to (6) to write the program.
(1) Read the program into the PROM programmer.
(2) Attach the adapter to the PROM programmer. (see 3.2).
(3) Insert the MCU into the adapter. (see 3.3)
(4) Using the PROM programmer's erase check function, check whether data can be written into
the MCU's programming area. *
(5) Write the program into the programming area of the MCU using the PROM programmer. *
(6) Verify the programming area of the MCU using the PROM programmer to check whether the
program has been written into the MCU correctly. *
Notes:
*1 Be sure to set the programming area. Otherwise the mode's shift to the programming mode may
not be performed successfully. The erase check function etc. may not also be performed
completely.
*2 Some PROM programmers perform the steps (4) through (6) automatically.
( 8 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Attaching the Adapter to a PROM Programmer
As shown in Figure 3.1, attach the No. 1 pin of the PCA7402D connector (standard-pitch 28-pin pin-
header mounted) to the No. 1 pin of the IC socket of the PROM programmer.
Be careful when attaching to the PROM programmer because an incorrect
insertion can cause fatal damage to the MCU.
Figure 3.1 Attaching the adapter to a PROM programmer
3.3 Inserting an MCU into the Adapter
(1) For PCA7441
As shown in Figure 3.2, set the slide bar of the IC socket to the right side (marked on the board) and
insert the MCU into the IC socket, with the pin No. 1 of the MCU matched to the pin No. 1 of the IC
socket.
Be careful when attaching to the PROM programmer because an incorrect
insertion can cause fatal damage to the MCU.
Top view
Figure 3.2 Inserting an MCU (PCA7441)
( 9 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
(2) For PCA7442FPG02
As shown in Figure 3.3, insert the MCU into the IC socket with the No. 1 pin of the MCU matched
to the No. 1 pin of the IC socket on the PCA7442FPG02.
Be careful when attaching to the PROM programmer because an incorrect
insertion can cause fatal damage to the MCU.
Top view
Figure 3.3 Inserting an MCU (PCA7442FPG02)
(3) For PCA7442SP
As shown in Figure 3.4, insert the MCU into the IC socket with the No. 1 pin of the MCU matched
to the No. 1 pin of the IC socket on the PCA7442SP.
Be careful when attaching to the PROM programmer because an incorrect
insertion can cause fatal damage to the MCU.
Top view
Figure 3.4 Inserting an MCU (PCA7442SP)
( 10 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Cuation for the Slide Bar of the PCA7441:
• There is a slide bar in the center of the PCA7441. Set this slide bar to the shaded area
(factory-setting). Otherwise the MCU may cause a break because of an electrical
insulation failure.
Caution to Be Taken for Handling an MCU:
• Do not touch the connector in the IC socket and the pins on the PROM programmer
connector. Otherwise it can cause an electrical insulation failure because of dirt.
When not using, attach the connector pins of this product to the conductive sponge
as it was shipped from the factory.
Caution When Opening and Closing the IC Socket:
• When opening and closing the IC socket, hold the adapter horizontally as shown in
Figure 3.5. Otherwise the inside of the IC socket may become damaged and cause
an electrical insulation failure.
Side view
Figure 3.5 Opening and closing the IC socket
( 11 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Recommended PROM Programmers
The PROM programmers listed in Table 3.1 are recommended for this product. Using the actual
products, we have verified that these PROM programmers can be used to write programs without
problem. Nonconformity occurring by using any other PROM programmers listed in Table 3.1 can
not be supported. For how to operate the PROM programmer and the latest type of PROM
programmers, contact the manufacturer to confirm whether it can be used for your product.
Table 3.1 Recommended PROM programmers
Manufacturer
Type name
TR4943
R4944A
R4945
Device
Programming voltage (Vpp)
M5L27256 mode
M5L27C256 mode
M5M27C256A mode
M5M27C256A mode
Advantest Corporation
12.5 V
R4945A
( 12 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Specifications
4.1 Specifications
Table 4.1 lists common specifications of the programming adapters, and Table 4.2 lists individual
specifications of each programming adapter.
Table 4.1 Common specifications of the PCA7441, PCA7442FPG02 and PCA7442SP
1.0 MHz
Operating clock frequency
(Supplied by the ceramic oscillator mounted on the adapter)
Power supply
Main unit
Supplied from Vcc of the PROM programmer
Board to insert a programmable MCU
(IC socket for MCU mounted)
Interface board
Board
configuration
PCA7414B
(Interface unit)
(Connected by two rows of standard-pitch 18-pin connectors
and two rows of standard-pitch 16-pin connectors to the upper
and lower boards)
Board to connect to the PROM programmer
(Standard-pitch 28-pin pin-header mounted)
PCA7402D
(Connector)
Table 4.2 Specifications of each adapter
Product name
Item
Description
4500 Series 42-pin 0.8-mm-pitch SSOP (42P2R-A)
M34514E8FP, M34519E8FP, M34574EDFP
MCU
PCA7441
IC51-0422-393 (made by Yamaichi Electronics Co. Ltd.)
IC socket
4500 Series 32-pin 0.8-mm-pitch LQFP (32P6B-A, 32P6U-A)
M34513E4/E8FP, M34518E8FP, M34583EDFP
MCU
IC socket
MCU
PCA7442FPG02
PCA7442SP
IC51-1498.AC-26323 (made by Yamaichi Electronics Co. Ltd.)
4500 Series 32-pin 1.778-mm-pitch SDIP (32P4B)
M34513E4/E8SP, M34518E8SP
IC59-3204-G4 (made by Yamaichi Electronics Co. Ltd.)
IC socket
( 13 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Memory Maps
Figure 4.1 shows memory maps of the MCU and the PROM programmer.
PROM programmer
MCU
0000h
XXXXh
0000h
XXXXh
Programming area*3
(10 bits x ZZZZZ words)
*1
*1
Lower 5 bits
*2
Unused area*4
3FFFh
3FFFh
4000h
Upper 5 bits
YYYYh
*2
7FFFh
*1: This area is fixed to "1" on the PROM programmer.
*2: Set "FFh".
*3: When writing, the lower 5 bits and the upper 5 bits are divided and then written into
the MCU.
*4: When reading, "1" is read out.
ROM capacity
ZZZZZ
4,096
XXXX
0FFF
1FFF
3FFF
YYYY
4FFF
5FFF
7FFF
E4
E8
ED
8,192
16,384
Figure 4.1 Memory maps
( 14 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Troubleshooting
The table below summarizes errors to be checked carefully before you determine them to be a fault.
5.1 Errors That Occur When Writing to PROM
(1) When Newly Purchased
Remedy
Cause
See page
9
Is the adapter attached to the correct position of the PROM
programmer?
Programming adapter
Is the MCU attached to the correct position?
Is the correct device selected?
9
PROM programmer
Contact failure
12
The IC socket of the PROM programmer may be stained. The
socket needs replacing.
-
(2) Previously Written Normally
Remedy
Cause
See page
9
Is the adapter attached to the correct position of the PROM
programmer?
Programming adapter
PROM programmer
Is the MCU attached to the correct position?
Is the correct device selected?
9
12
The IC socket of the PROM programmer may be stained. The
socket needs replacing.
-
-
Contact failure
The PROM programmer connector (28-pin pin-header) at which
the PROM programmer is contacted may be stained. Clean it
with alcohol, etc.
5.2 MCUs Do Not Function Normally
The program operates normally on the emulator, but when the MCU that has normally been written
is attached the same program does not function normally.
(1) In the emulator, NOPs are often inserted in the area where the program has not been read, therefore
the program happens to appear functioning normally even though it may have gone wild. Check
your program again.
(2) The emulator and the actual MCU may differ in characteristics. Consult the user's manual of the
emulation pod to check for differences in characteristics again.
( 15 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Other Precautions
(1) About the Recommended PROM Programmers
Not all PROM programmers available on the market can be checked to see if they function properly.
There are several PROM programmers that we have verified to function properly. These products are
listed as recommended PROM programmers in this user's manual. Other PROM programmers may
also be used providing that you verified them to function properly.
Note: No matter which type of PROM programmer you use, it is necessary to verify completion of
programming by executing screening, etc. that are stipulated for each MCU used.
(2) About Reading Out of Device Identification Code *1
Please do not use the PROM programmer's device identification code readout function.
Using this function may break down the MCU. The device identification code is included in EPROM
to indicate the manufacturer code and device code; it is not included in the MCU.
*1 Depending on PROM programmer manufacturers, this may be referred to by another name (e.g.
ID code).
5.4 How to Request for Support
After checking this manual, fill in the following information and email to your local distributor.
For prompt response, please specify the following information:
(1) Contact address
• Company name
• Department
• Responsible person
• Phone number
• Fax number
• E-mail address
(2) Product information
• Name of the programming adapter
• Serial number
• Date of purchase
• Target MCU
• Symptoms (Fails blank check/Cannot write a program/Fails verification etc.)
• Detailed symptoms
• How often does the problem occur? (2 out of 10 etc.)
• When did the problem start to occur? (Since purchase/Used to work correctly)
• Type name of the PROM programmer (Advantest R4945A etc.)
• Specified device when writing to PROM (M27C101 etc.)
• Specified programming area when writing to PROM
• Switch settings of the adapter when writing to PROM
( 16 / 18 )
Download from Www.Somanuals.com. All Manuals Search And Download.
PCA7441, PCA7442FPG02, PCA7442SP User's Manual
Rev.1.00
July 1, 2003
REJ10J0188-0100Z
COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION
AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|