M37630T-RFS
Converter Board for M37630 Emulator MCU
User's Manual
Keep safety first in your circuit designs!
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,
Renesas Solutions Corporation or a third party.
• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://
www.renesas.com).
• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.
• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,
medical, aerospace, nuclear, or undersea repeater use.
• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part
these materials.
• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and
regulations of Japan and/or the country of destination is prohibited.
• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.
Precautions to be taken when using this product
• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some
experiment else.
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.
• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
CAUTION
Rev.1.00
September 1, 2003
REJ10J0297-0100Z
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. Precautions for Safety.................................................................................................................... 4
1.1 Safety Symbols and Meanings ......................................................................................... 4
2. Things to Check When Unpacking................................................................................................ 6
3. Introduction ................................................................................................................................... 6
4. Pin Assignments ............................................................................................................................ 7
5. External Dimensions ..................................................................................................................... 7
6. Setup .............................................................................................................................................. 8
To use the product properly
Precautions for Safety:
• In both this user's manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
• The icons' graphic images and meanings are given in "Chapter 1. Precautions for
Safety". Be sure to read this chapter before using the product.
( 3 / 8 )
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Precautions for Safety
In both the user's manual and on the product itself, several icons are used to insure proper handling
of this product and also to prevent injuries to you or other persons, or damage to your properties.
This chapter describes the precautions which should be taken in order to use this product safely and
properly. Be sure to read this chapter before using this product.
1.1 Safety Symbols and Meanings
If the requirements shown in the "WARNING"
sentences are ignored, the equipment may
cause serious personal injury or death.
WARNING
If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may
malfunction.
CAUTION
It means important information on using this
product.
IMPORTANT
In addition to the three above, the following are also used as appropriate.
means WARNING or CAUTION.
Example:
CAUTION AGAINST AN ELECTRIC SHOCK
means PROHIBITION.
Example:
DISASSEMBLY PROHIBITED
means A FORCIBLE ACTION.
Example:
UNPLUG THE POWER CABLE FROM THE RECEPTACLE.
The following page describes the symbol "CAUTION".
( 4 / 8 )
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Cautions to Be Taken for Handling This Product:
• Do not disassemble or modify this product. Disassembling or modifying this product can cause
damage.
• Use caution when handling the main unit. Be careful not to apply a mechanical shock.
• Pins of the TQPACK may be broken even by a slight shock because they are very thin (0.25 mm).
Therefore, be careful when handling the TQPACK. Also be sure to connect the TQPACK and to
solder the TQPACK onto a user's board in the right direction.
• Connector pins of the TQPACK and the TQSOCKET are very thin and bent easily. Therefore,
handle the TQPACK and the TQSOCKET carefully as is the case with MCUs.
• When connecting the TQSOCKET to the TQPACK, after checking that there is no bend on the pins
of the both connectors and they are in the right direction, gently connect the connectors vertically
to the board.
• When using this product and MCU, be careful of static electricity.
• The TQSOCKET can be inserted and removed up to 100 times. When inserting and removing it
more than 100 times, exchange of the TQSOCKET044SAG is necessary. Please ask Tokyo Eletech
Corporation about purchasing the TQSOCKET044SAG.
• Do not apply unnecessary stress to the M37630T-RFS.
• Please contact Tokyo Eletech Corporation about dimensional drawings and specifications of the
TQPACK and the TQSOCKET.
• Request of repair is not acceptable.
( 5 / 8 )
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Things to Check When Unpacking
The M37630T-RFS consists of the following parts and the board. When unpacking, check to see if
your M37630T-RFS package contains all of these items.
Contents
M37630T-RFS
PCA4628
PCA4628B
TQSOCKET044SAG
TQPACK044SA
x1
x1
x1
x1
x1
x1
x1
M37630E4FS
M37630T-RFS User's Manual (this manual)
When shipped from the factory:
• The PCA4628B is already connected to the M37630T-RFS.
• The TQSOCKET044SAF is already connected to the PCA4628B.
3. Introduction
The M37630T-RFS is an emulator MCU board which is used by connecting it to the M38000T-FPD,
M38000TL-FPD or M38000TL2-FPD emulation pod for 8-bit microcomputers. The M37630T-RFS
functions as an emulator MCU by connecting the M37630E4FS to the M37630T-RFS board.
The 44-pin QFP MCU (M37630E4FP) can also be mounted by connecting the attached PCA4628
instead of the M37630T-RFS.
Figure 3.1 shows the system configuration using the M37630T-RFS.
Figure 3.1 Configuration
( 6 / 8 )
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Pin Assignments
Table 4.1 shows pin assignments of the M37630T-RFS.
Table 4.1 Pin assignments of the M37630T-RFS
TQPACK Signal J3 Connector TQPACK Signal J3 Connector TQPACK Signal J3 Connector TQPACK Signal J3 Connector
1
2
P31
P32
P33
P34
P40
P41
P42
P43
P44
P45
P46
19
20
21
22
23
24
48
47
46
45
44
12
P47
43
42
23
24
25
26
27
28
29
30
31
32
33
P03
P04
P05
P06
P07
P11
P12
P13
P14
P15
P16
27
26
25
1
34
35
36
37
38
39
40
41
42
43
44
P17
P20
P21
P22
P23
Vss
P24
P25
P26
P27
P30
9
10
13 RESET
3
14
15
16
17
Vss
Xin
38-41
37
11
4
12
5
Xout
Vcc
36
2
13
6
33-35
32
3
38-41
14
7
18 AVss
4
8
19
20
21
22
Vref
P00
P01
P02
31
5
15
9
30
6
16
10
11
29
7
17
28
8
18
5. External Dimensions
Figure 5.1 shows external dimensions of the M37630T-RFS.
Unit: mm
Figure 5.1 External dimensions of the M37630T-RFS
( 7 / 8 )
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Setup
(1) Connect the M37630T-RFS or the PCA4628 to the PCA4628B.
(2) Connect the boards combined in the procedure (1) to the TQSOCKET044SAG.
(3) Connect the products combined in the procedure (2) to the TQPACK044SA soldered onto the
user's board.
Figure 6.1 Setting up the products
( 8 / 8 )
Download from Www.Somanuals.com. All Manuals Search And Download.
|