D3310_update 6/28/05 10:09 AM Page 1
Use and Care Guide
All the power!
All the features!
All the style!
D-3310
Download from Www.Somanuals.com. All Manuals Search And Download.
D3310_update 6/28/05 10:09 AM Page 4
Safety Instructions
1. Should the ALCI safety device trip (i.e.,
ALCI Safety Device
reset button pops out) during use, press
the reset button. Should the hair dryer
fail to reset, call 800-736-4648. Never
operate this appliance if it has been
dropped in water.
This hair dryer is provided with an
appliance leakage circuit interrupter (ALCI)
safety device built into the plug. This device
is designed to make the unit inoperable
under some abnormal conditions, such as
accidental immersion in water. The ALCI
safety device is equipped with a test button
so that its operation can be checked.
This unit should be tested before each use
to confirm that the safety device is
operational.
2. The dryer is designed to work on
ordinary household current only, 125
volts A.C., 60 Hz. It is not intended for
commercial use.
GROUND FAULT CIRCUIT
INTERRUPTERS CAN
SAVE A LIFE!
3. This appliance is equipped with an
automatic thermal limiter, which will
cycle off when overheated and come
back on when cooled down. If the unit
cycles off, unplug the cord for several
minutes before restarting.
To test:
After plugging in your hair dryer:
If you must use your hair dryer in the
1. Press the reset button on the
ALCI device.
bathroom, install a GFCI* now!
Your local electrician can help you decide which type is best for you –
a portable unit that plugs into the electrical outlet or a permanent
unit installed by your electrician. The National Electrical Code now
requires GFCI’s in bathrooms, garages, and outdoor outlets of all
new homes.
4. This appliance has a polarized plug
(one blade is wider than the other). As
a safety feature, this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not attempt to
defeat this safety feature.
2. Press the test button. The reset button
will pop out. This verifies that the safety
device is operating properly.
3. Press the reset button to reactivate your
ALCI safety device.
Why do you need a GFCI?
Electricity and water don’t mix. If your hair dryer falls in water while
it’s plugged in, the electric shock can kill you– even if the switch is
“off.” A regular fuse or circuit breaker won’t protect you under these
circumstances. A GFCI offers you greater protection.
4. Your hair dryer is now ready for use.
Note: This unit may automatically trip
when unplugged. If so, the unit must be
reset after it is plugged in. If the dryer
doesn’t reset after following the above
testing procedure, call 800-736-4648.
A GFCI can save your life!
Compared to that, the price is small!
Don’t wait… install one now!
*GFCI is a sensitive device that reacts immedi-
ately to a small electric current leak by stopping
the electricity flow.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
D3310_update 6/28/05 10:09 AM Page 6
Product Features
How to Use
For straight, smooth hair:
Thank you for purchasing the Remington® All That hair dryer.
Basic Drying Techniques
1. Gently towel dry hair to remove excess
water. Avoid rubbing hair with towel –
this creates split ends and frizziness.
Detangle hair with a wide-toothed comb.
With the dryer turned off, attach the
concentrator to the end of the nozzle. Brush
hair from underneath using a large, round
brush or paddle brush. Pull hair down until
the hair is fully extended and taut. Run the
dryer slowly down the length of the hair
several times until dry. Repeat with all
sections of hair until it is completely dried.
1875 watts
Angled barrel for
easy handling
when drying the
top of your head
2. Be sure dryer is turned off. Plug dryer
into an electrical outlet.
3. Turn the dryer on and set it to a high
heat and speed. Remove some of the
additional moisture from your hair by
briskly blow drying it all over, using your
fingers to "comb" through hair.
For curly hair:
Use dryer on a low heat and speed setting
and move it quickly about your head. As
you dry your hair, scrunch it with your
favorite styling product or twirl strands of
hair around your fingers to add definition.
Removable
grille
3 heat settings
4. When hair is almost dry, lower the heat
and speed to the desired settings and
begin to style.
OFF/LOW/HIGH
speed settings
5. Divide hair into manageable sections.
Begin at the nape of your neck and
brush hair, following the movement of
the brush with the dryer. Continue
working your way up to your scalp, then
to the sides and the front, drying small
sections at a time.
6 ft. cord
with
hang loop
RECOMMENDED SETTINGS
HAIR TYPE
Airflow
Low
Heat
Low
Short and Curly
Ionic Conditioning
Short and Sculptured
Mid-Length and Sculptured
Mid-Length and Sleek
Low
Low
Negative ions neutralize the
positive ions that cause
static and frizz, giving hair a
more healthy-looking shine.
Low
High
Medium
Medium
High
Mid-Length or Long and Curly Low
Slow-Moving
Hot Air
Long and Sculptured
Long and Sleek
High
High
High
Fast Air
High
High Speed
Airflow
A powerful fan design with a narrow bar-
rel creates a high-speed airflow to help
reduce hot spots and over-drying.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
D3310_update 6/28/05 10:09 AM Page 8
Hair Care Tips
Cleaning and Maintenance
■ For a super smooth, salon-like blow dry,
finish by running a straightening iron
over dried hair.
Maintenance Instructions
Storage
Hair Care Tips
The dryer needs minimum maintenance to
ensure the best performance and long life.
When not in use, unplug the unit. Allow it to
cool, and store out of reach of children in a
safe, dry location. Never wrap the cord
around the appliance, as this will cause the
cord to wear prematurely and break. Handle
cord carefully, and avoid jerking, twisting, or
straining it, especially at plug connections.
■ Keep the dryer about 8 inches away
from your head to avoid burning scalp or
damaging hair.
■ For a quick touch-up between sham-
poos, mist hair to dampen it, then style
with dryer.
■ Do not attempt to repair the appliance
yourself.
■ Always keep the dryer pointed down the
hair shaft to smooth the cuticle and
create a silky, shiny style.
■ Keep all intake openings clear of dust
accumulation. See “Cleaning Instructions”
below. No other maintenance or
lubrication is required.
■ To help prevent heat damage and add
shine, spritz damp hair with a heat
protection spray before blow drying.
■ If the cord becomes twisted due to use,
periodically straighten it. Store appliance
and cord where they will not be dam-
aged. Do not wrap cord around dryer.
■ To create a style with lots of body, apply
volumizing mousse to towel dried hair.
Distribute it evenly from roots to ends,
then blow dry as usual. Hair will be soft,
shiny, and full of volume.
Cleaning Instructions
The air filter should be cleaned regularly,
since a dirty or clogged filter will impair the
efficiency of the dryer.
1. To clean air filter, make sure dryer is
turned off and unplugged.
2. Gently rotate the air inlet grille counter-
clockwise while lifting the filter away from
the dryer .
3. Use a soft bristle brush to gently remove
any particles that are lodged in filter.
4. If the unit is dirty, wipe it with a damp
cloth.
5. To replace the air inlet after cleaning,
align locking tabs and rotate clockwise
to secure.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
D3310_update 6/28/05 10:09 AM Page 10
Warranty
125 VAC 60 Hz
Full Two-Year Warranty
Spectrum Brands, Inc. warrants this
Questions or comments:
Call 800-736-4648
or visit www.remington-products.com
product against any defects that are due
to faulty material or workmanship for a
two-year period from the original date of
consumer purchase. This warranty does
not include damage to the product
REMINGTON, ALL THAT and PROTECT & SHINE
are trademarks of ROVCAL, INC.
©2004 ROVCAL, INC.
resulting from accident or misuse.
10/04
T2207735
If the product should become defective
within the warranty period, we will repair it
or elect to replace it free of charge. Please
call 800-736-4648.
Spectrum Brands, Inc.
800-736-4648
MADE IN CHINA
SPCTRUM BRANDS, INC. SHALL
NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSE-
QUENTIAL DAMAGES.
This product is listed by
Underwriters Laboratories, Inc.
This warranty gives you specific legal
rights and you may also have other rights
which vary from state to state. Some states
do not allow the exclusion or limitation
of incidental, special, or consequential
damages.
Spectrum Brands, Inc.
Money-Back Offer
If within 30 days after you have purchased
your Remington branded product, you are
not satisfied and would like a refund,
return it with the sales slip indicating
purchase price and date of purchase to the
retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all
retailers who accept the product within 30
days from the date of purchase. If you have
any questions concerning the money-back
guarantee, please call 800-736-4648.
11
10
Download from Www.Somanuals.com. All Manuals Search And Download.
D3310_update 6/28/05 10:09 AM Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
|