¨
Model No. RBTL11990
Serial No.
USER'S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through di-
rect assistance from our factory.
PLEASE CALL DIRECT TO OUR
TOLL-FREE CUSTOMER HOT
LINE. The trained technicians on
our customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
¨
new products, prizes,
fitness tips, and much more!
¨
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
DANGER:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
13. Use only a UL-listed surge protector, rated at
15 amps, with a 14-gauge cord of five feet or
less in length. Do not use an extension cord.
2. Use the treadmill only as described in this
manual.
14. Keep the power cord and the surge protector
away from heated surfaces.
3. This treadmill is intended for home use only.
Do not use this treadmill in any commercial,
rental, or institutional setting.
15. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the tread-
mill is not working properly.)
4. Place the treadmill on a level surface, with at
least eight feet of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill.
16. Never start the treadmill while you are stand-
ing on the walking belt.
5. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
17. Always hold the handrails while using the
treadmill.
18. The treadmill is capable of high speeds. Adjust
the speed in small increments to avoid sudden
jumps in speed.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
19. To reduce the possibility of the treadmill over-
heating, do not operate the treadmill continu-
ously for longer than one hour.
7. Keep children under the age of 12 and pets
away from the treadmill at all times.
8. The treadmill should not be used by persons
weighing more than 250 pounds.
20. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the loca-
tion of the on/off switch.)
9. Never allow more than one person on the
treadmill at a time.
10. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth-
ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.
21. Do not attempt to raise, lower, or move the
treadmill until it is properly set up. (See HOW
TO SET UP THE TREADMILL on page 6 and
HOW TO MOVE THE TREADMILL on page 19.)
You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.
11. Always wear athletic shoes when using the
treadmill. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.
22. Do not change the incline of the treadmill by
placing objects under the treadmill.
12. When connecting the power cord (see page 7),
plug the power cord into a surge protector (not 23. When folding or moving the treadmill, make
included) and plug the surge protector into a
grounded circuit capable of carrying 15 or
more amps. No other appliance should be on
the same circuit. Do not use an extension cord.
sure that the storage latch is fully closed.
24. Inspect and tighten all parts of the treadmill
regularly.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
25. When using iFit.com CDÕs and videos, an
electronic ÒchirpingÓ sound will alert you
when the speed and/or incline of the treadmill
is about to change. Always listen for the
ÒchirpÓ and be prepared for speed and/or in-
cline changes. In some instances, the speed
and/or incline may change before the per-
sonal trainer describes the change.
27. Always remove iFit.com CDÕs and videos from
your CD player or VCR when you are not
using them.
28. Never drop or insert any object into any
opening.
29.
DANGER:
Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the main-
tenance and adjustment procedures de-
scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
26. When using iFit.com CDÕs and videos, you
can manually override the speed and incline
settings by pressing the speed and incline
buttons. However, when the next ÒchirpÓ is
heard, the speed and/or incline will change to
the next settings of the CD or video program.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown below have been placed on your treadmill. If a decal is missing or illegible, please call
our Customer Service Department toll-free to order a free replacement decal (see HOW TO ORDER
REPLACEMENT PARTS on page 27). Apply the decal in the location shown.
(One decal on
each side)
Note: The decal is shown at 38% of actual size.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the new REEBOK¨ ACD1
treadmill. The ACD1 treadmill combines advanced
technology with innovative design to let you enjoy an
excellent form of cardiovascular exercise in the conve-
nience and privacy of your home. And when youÕre not
exercising, the unique ACD1 can be folded up, requir-
ing less than half the floor space of other treadmills.
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please mention the product model
number and serial number when calling. The model
number is RBTL11990. The serial number can be
found on a decal attached to the treadmill (see the
front cover of this manual for the location).
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department toll-free
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Book Holder
Water Bottle Holder
(Bottle is not included)
Console
Handrail
LEFT SIDE
Key/Clip
Lock Knob
RIGHT SIDE
Walking Belt
Foot Rails
On/Off Switch
Circuit
Breaker
Storage Latch
Front
Wheel
Power
Cord
Rear Roller
Adjustment Bolts
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO SET UP THE TREADMILL
Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials
until set-up is completed. No tools are required.
1. With the help of a second person, carefully raise the
Uprights (39) until the treadmill is in the position shown.
1
39
2. Make sure that the Lock Knob Sleeve (18) is pressed into
the left Upright (39).
2
Make sure that the Lock Pin Collar (20) and the Spring
(19) are on the Lock Pin (49). Insert the Lock Pin into the
Lock Knob Sleeve (18) and the left Upright (39). Tighten
the Lock Knob (17) onto the Lock Pin.
19
20
17
49
39
18
3. Make sure that all parts are tightened before you use the treadmill. Place a mat under the treadmill to
protect the floor or carpet.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TREADMILL OPERATION
THE PERFORMANT LUBETM WALKING BELT
electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge
protector, and plug the surge protector into an ap-
propriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walking belt and
cause excessive wear.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if a properly grounded out-
let is not available.
HOW TO PLUG IN THE POWER CORD
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet in-
stalled by a qualified electrician.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can re-
sult from weather conditions or from other appliances
being turned on or off.
To decrease the pos-
sibility of your tread-
1
Grounded Outlet Box
mill being damaged,
always use a surge
protector (not in-
cluded) with your
treadmill.
Treadmill Power Cord
Grounding Pin
Grounding Plug
Grounding Plug
Grounding Pin
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.
Grounded Outlet
2
Grounded Outlet Box
Adapter
Grounding Pin
Grounding Plug
This product must be
grounded. If it should
malfunction or break
Surge Protector
down, grounding pro-
vides a path of least re-
sistance for electric cur-
rent to reduce the risk of
Lug
Metal Screw
7
Download from Www.Somanuals.com. All Manuals Search And Download.
C
J
K
A
B
A
G
F
E
A
D
H
Note: If there is a thin sheet of clear plastic
on the face of the console, remove it.
I
FEATURES OF THE CONSOLE
CD features two programs designed by certified per-
sonal trainers.
The advanced console offers an impressive array of
features to make your workouts more effective. When
the console is in the manual mode, the speed and
incline of the treadmill can be changed with a touch of
a button. As you exercise, the LED displays will provide
continuous exercise feedback.
In addition, you can connect the treadmill to your VCR
and TV and play iFit.com video programs (videocas-
settes are available separately). Video programs offer
the same benefits as iFit.com CD programs, but add
the excitement of working out with a class and an
instructorÑthe hottest new trend at health clubs.
The console also offers six preset workout programs:
three programs that target fat-burning and three pro-
grams that focus on aerobic conditioning. Each program
automatically controls the speed and incline of the
treadmill as it guides you through an effective workout.
With the treadmill connected to your computer, you can
access basic programs, audio programs, and video
programs directly from the internet. And by adding an
optional iFit.com module to the treadmill, you can use
virtually endless features from our internet site. See
www.iFit.com for complete details. To purchase
iFit.com CDÕs or videocassettes, call toll-free 1-800-
735-0768. To purchase an optional iFit.com module,
call toll-free 1-800-884-0620.
The console also features new iFit.com interactive
technology. IFit.com technology is like having a per-
sonal trainer right in your home. Using the included
audio cable, you can connect the treadmill to your
home stereo, portable stereo, or computer and play
special iFit.com CD programs (CDÕs are available sep-
arately). IFit.com CD programs automatically control
the speed and incline of the treadmill as a personal
trainer guides you through every step of your workout.
High-energy music provides added motivation. Each
The console is also compatible with an optional heart
rate monitor that continuously monitors your heart rate
during your workouts. To purchase an optional heart
rate monitor, refer to page 13.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DIAGRAM OF THE CONSOLE
the speed will change by 0.1 mph; if a button is held
down, the speed will change in increments of 0.5
mph. The speed range is 0.5 mph to 10 mph.
Refer to the drawing on page 8.
A. LED DisplaysÑThese displays provide continuous
feedback of the calories and fat calories you have
burned, the speed of the walking belt, your current
pace, the distance you have walked or run, the
number of laps you have completed, and the
elapsed time. In addition, the PULSE display shows
your heart rate when the optional heart rate monitor
is worn. Note: The console can display speed
and distance in either miles or kilometers (see
page 11). For simplicity, all instructions in this
manual refer to miles.
F. MODE ButtonÑThis button is used to select the
manual mode, preset workout programs, and the
iFit.com mode.
G. START ButtonÑThis button starts the walking belt.
H. STOP ButtonÑThis button stops the walking belt.
When the button is pressed, the LED displays will
pause and the TIME display will flash.
I. Key with ClipÑThe key turns the console on and off.
The attached clip is designed to be worn on your
waistband. If the key is pulled from the console, the
power will automatically turn off.
B. Manual/Program IndicatorsÑThese indicators show
when the manual mode, a preset workout program,
or the iFit.com mode is selected.
J. INCLINE ButtonsÑThese buttons control the incline
of the treadmill. Each time a button is pressed, the
incline will change by 0.5%. The incline range is
1.5% to 10%.
C. LED MatrixÑWhen the manual mode is selected,
the matrix will show your progress on an LED track.
When a preset workout program is selected, the
matrix will show the upcoming speed settings of the
program.
K. INCLINE DisplayÑThis display shows the incline
level of the treadmill. The first indicator will light
when the incline is at 1.5%, the second indicator will
light when the incline is at 2% or 2.5%, the third in-
dicator will light when the incline is at 3% or 3.5%,
and so forth.
D. QUICK SPEED ButtonsÑThese buttons allow you
to quickly select speed settings.
E. SPEED ButtonsÑThese buttons control the speed
of the walking belt. Each time a button is pressed,
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MANUAL MODE
Insert the key into the console.
CAUTION:Before operating the
console, read the following precautions.
¥ Do not stand on the walking belt when turn-
ing on the power or starting the walking belt.
1
See HOW TO TURN ON THE POWER at the left.
¥ Always wear the clip (see I on page 8) while
operating the treadmill. If the key is pulled
from the console, the walking belt will stop.
Select the manual mode.
2
When the key is inserted,
the manual mode will be
selected and the manual
indicator will light. If you
have selected a preset
workout program or the
iFit.com mode, select the manual mode again by
pressing the MODE button repeatedly until the
manual indicator lights.
¥ The treadmill is capable of high speeds;
adjust the speed in small increments.
¥ To reduce the risk of electric shock, keep the
console dry. Avoid spilling liquid on the
console and use only a sealable water bottle.
Press the START button or the SPEED + button
to start the walking belt.
HOW TO TURN ON THE POWER
3
Make sure that the
on/off switch, located
on the front of the
treadmill, is in the on
position.
A moment after the
button is pressed, the
walking belt will begin to
move at 1.0 mph. Hold
the handrails and begin
walking. As you exercise,
On
change the speed of the walking belt as desired
by pressing the SPEED buttons or the QUICK
SPEED buttons. Note: After the buttons are
pressed, it will take a moment for the walking belt
to reach the selected speed setting. Important:
Change the speed in small increments to
avoid sudden jumps in speed.
Next, make sure that the power cord is properly plugged
in (see page 7).
Step onto the foot rails of the
treadmill. Find the clip
attached to the key, and slide
the clip onto the waistband of
your clothing. Pull the cord
on the clip to make sure
that the clip is securely
To stop the walking belt, press the STOP button.
The displays will pause and the TIME display will
begin to flash. To restart the walking belt, press
the START button or the SPEED
+
button.
attached to your waistband. Next, insert the key into
the console. After a moment, various displays and indi-
cators will light.
Note: When the SPEED buttons are pressed, the
SPEED/PACE display will show the selected
speed setting for seven seconds. The display will
then show the actual speed of the walking belt.
To use the manual mode of the console, follow the
steps beginning on page 10. To use a fat burn program
or an aerobic program, see page 12. To use an
iFit.com CD or video program, refer to page 16. To
use an iFit.com program directly from our internet
site, see page 18.
Adjust the incline as desired.
4
To vary the intensity of
your workout, change the
incline of the treadmill as
desired by pressing the
INCLINE buttons Note:
After the buttons are
pressed, it will take a
moment for the treadmill
to reach the selected incline setting.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED/PACE display will
show either an ÒEÓ for
English miles or an ÒMÓ
Follow your progress with the LED track and
the LED displays.
5
for metric kilometers.
Press the SPEED + but-
ton to change the unit of
measurement. Then, remove and reinsert the key.
The LED TrackÑ
The LED track
represents a dis-
tance of 1/4 mile.
As you exercise,
DISTANCE/LAPS
displayÑThis display
the indicators
around the track
shows the distance that
the walking belt has
moved and the number
of laps you have com-
will light one at a
time until you have completed 1/4 mile. A new lap
will then begin.
pleted (one lap equals 1/4 mile). The display will
alternate between one number and the other every
seven seconds.
CALS/FAT CALS
displayÑThis display
shows the approximate
numbers of calories and
Note: If the speed is displayed in miles per hour,
the distance will be displayed in miles; if the speed
is displayed in kilometers per hour, the distance
will be displayed in kilometers.
fat calories you have
burned (see FAT BURN-
ING on page 24). Every seven seconds, the display
will change from one number to the other.
TIME displayÑThis
display shows the total
time that the walking belt
has been moving. Note:
When a preset workout
PULSE displayÑThis
display shows your heart
rate when the optional
heart rate monitor is
worn.
program is selected, this
display will show the time remaining in the program.
SPEED/PACE displayÑ
This display shows the
speed of the walking belt
and your current pace
(pace is measured in min-
utes per mile). The dis-
play will alternate between one number and the
other every seven seconds. Note: When the
SPEED buttons are pressed, the display will show
the speed setting.
When you are finished exercising, stop the
walking belt and remove the key.
6
Step onto the foot rails and press the STOP button.
Next, change the incline of the treadmill to the
lowest setting. The incline must be at the low-
est setting when the treadmill is folded to the
storage position or the treadmill will be dam-
aged. Remove the key from the console and put it
in a secure place. Finally, move the on/off switch to
the off position and unplug the power cord.
How to select miles per hour or kilometers per
hour: Speed can be displayed in either miles per
hour (mph) or kilometers per hour (kph). To change
the unit of measurement, first hold down the STOP
button while inserting the key into the console. The
11
Download from Www.Somanuals.com. All Manuals Search And Download.
umn and the column to the right will flash, a series
of tones will sound, and all speed settings will
move one column to the left. The speed setting for
the second period will then be shown in the flash-
ing CURRENT PERIOD column and the treadmill
will automatically adjust to the speed and incline
settings for the second period.
HOW TO USE FAT BURN PROGRAMS AND
AEROBIC PROGRAMS
The six preset workout programs automatically control
the speed and incline of the treadmill as they guide you
through effective workouts. Follow the steps below to
use a fat burn program or an aerobic program.
The program will continue in this way until the
speed setting for the last period is shown in the
CURRENT PERIOD column and the TIME display
counts down to zero. The walking belt will then
slow to a stop.
Insert the key into the console.
1
See HOW TO TURN ON THE POWER on page 10.
Select the desired program.
Note: Each time a period ends and the speed set-
tings move to the left, if all of the indicators in the
CURRENT PERIOD column are lit, the speed set-
tings may move downward so that the highest indi-
cators in the columns will appear in the LED matrix.
When the speed settings move to the left again and
not all of the indicators in the CURRENT PERIOD
column are lit, the speed settings will move back up.
2
When the key is inserted,
the manual mode will be
selected. To select a fat
burn program or an aero-
bic program, press the
MODE button repeatedly
until one of the three fat burn indicators or one of
the three aerobic indicators lights.
If the speed or incline setting for the current
period is too high or too low, you can manually
override the setting by pressing the SPEED or
INCLINE buttons. Every few times one of the
SPEED buttons is pressed, an additional indicator
will light or darken in the CURRENT PERIOD col-
umn. If any of the columns to the right of the
CURRENT PERIOD column have the same num-
ber of lit indicators as the CURRENT PERIOD col-
umn, an additional indicator may light or darken in
those columns as well. Note: If you manually ad-
just the speed setting so that all of the indicators in
the CURRENT PERIOD column are lit, the speed
settings in the LED matrix will not move downward
as described above. Note: If you manually over-
ride the speed or incline setting for the current
period, when the next period begins the tread-
mill will automatically adjust to the speed and
incline settings for the next period.
When a fat burn program or an aerobic program is
selected, the LED matrix will show the first twelve
speed settings of the program. The SPEED/PACE
display will flash the programÕs maximum speed
setting and the INCLINE display will flash the pro-
gramÕs maximum incline setting for ten seconds.
Press the START button or the SPEED + button
to start the program.
3
A moment after the button is pressed, the treadmill
will automatically adjust to the first speed and in-
cline settings for the program. Hold the handrails
and begin walking.
Each program
is divided into
CURRENT PERIOD
several time pe-
riods of different
lengths. One
speed setting
and one incline
setting are pro-
grammed for
each period.
The speed set-
ting for the first period is shown in the flashing
CURRENT PERIOD column of the LED matrix.
(The incline settings are not shown in the matrix.)
The speed settings for the next twelve periods are
shown in the twelve columns to the right.
To stop the program temporarily, press the STOP
button. The TIME display will begin to flash. To
restart the program, press the START button or the
SPEED + button. To end the program, press the
STOP button, remove the key, and then reinsert
the key.
Follow your progress with the LED displays.
See step 5 on page 11.
4
5
When the program is finished, remove the key.
See step 6 on page 11.
When only three seconds remain in the first period
of the program, both the CURRENT PERIOD col-
12
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INFORMATION MODE/DEMO MODE
THE OPTIONAL HEART RATE MONITOR
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
The optional heart rate monitor continuously monitors
your heart rate during your workouts. The heart rate
monitor is specially designed for accuracy, comfort, and
durability. To purchase the heart rate monitor, call
toll-free 1-800-274-5473.
Heart Rate Monitor
To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The SPEED/PACE display will
show an ÒEÓ for English miles
or an ÒMÓ for metric kilometers.
The unit of measurement can
be changed by pressing the
SPEED + button.
THE OPTIONAL IFIT.COM MODULE
The TIME display will show the
total number of hours that the
treadmill has been used.
By adding the optional
iFit.com module to the tread-
mill, you can use virtually
endless features from our in-
ternet site. Imagine on-line
competitions, personal train-
ing sessions via the internet,
and the ability to use your computer to track your work-
outs. For information about purchasing the optional
iFit.com module, call toll-free 1-800-884-0620.
The DISTANCE/LAPS display
will show the total number of
miles that the walking belt has
moved.
IMPORTANT: Make sure that
there is not a ÒdÓ in the
CALS/FAT CALS display. If a
ÒdÓ appears in the display, the
console is in the ÒdemoÓ mode.
This mode is intended to be
used only when a treadmill is displayed in a store. When
the console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will auto-
matically light in a preset sequence, although the but-
tons on the console will not operate. If a ÒdÓ appears in
the CALS/FAT CALS display when the information
mode is selected, press the SPEED Ð button so the
display is blank.
To exit the information mode, remove the key from the
console.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR PORTABLE STEREO
HOW TO CONNECT THE TREADMILL TO YOUR
CD PLAYER, VCR, OR COMPUTER
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
To use iFit.com CDÕs, the treadmill must be connected
to your portable CD player, portable stereo, home
stereo, or computer with CD player. See this page and
page 15 for connecting instructions. To use iFit.com
videocassettes, the treadmill must be connected to
your VCR. See page 16 for connecting instructions. To
use iFit.com programs directly from our internet
site, the treadmill must be connected to your home
computer. See page 15 for connecting instructions.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into an AUDIO OUT jack on your stereo.
A
HOW TO CONNECT YOUR PORTABLE CD PLAYER
AUDIO OUT
RIGHT
LEFT
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
Audio
Cable
Adapter
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
A
PHONES LINE OUT
LINE OUT
PHONES
B
Head-
phones
Audio
Cable
LINE OUT
Audio
Cable
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your CD player. Plug your
headphones into the other side of the Y-adapter.
C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your stereo. Plug your
headphones into the other side of the Y-adapter.
B
PHONES
C
PHONES
3.5mm
Y-adapter
Audio
Cable
PHONES
3.5mm
Y-adapter
Audio
Cable
Headphones
Headphones
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A
A
CD
LINE OUT
VCR
Amp
LINE OUT
Audio
Cable
LINE OUT
Audio
Cable
Adapter
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
LINE OUT jack on your stereo.
B
PHONES
B
CD
Audio
Cable
3.5mm
Y-adapter
VCR
Amp
LINE OUT
Headphones/Speakers
RCA
Y-adapter
Audio
Cable
Adapter
Wire removed from
LINE OUT jack
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR VCR
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV with
a built-in VCR, see instruction B. If your VCR is
connected to your home stereo, see HOW TO CON-
NECT YOUR HOME STEREO on page 15.
To use iFit.com CDÕs or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or VCR.
See HOW TO CONNECT THE TREADMILL TO YOUR
CD PLAYER, VCR, OR COMPUTER on page 14.
Note: To purchase iFit.com CDÕs or videocassettes,
call toll-free 1-800-735-0768. Follow the steps below
to use an iFit.com CD or video program.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.
Insert the key into the console.
1
A
See HOW TO TURN ON THE POWER on page 10.
AN. IT
N
VIDEOAUDIO
IN
RF OUT
CH
3
4
OUT
AUDIO OUT
Select the iFit.com mode.
2
RIGHT
LEFT
When the key is in-
serted, the manual
Audio
Cable
Adapter
mode will be selected.
To use an iFit.com CD
or video program, press
the MODE button re-
peatedly until the iFit.com indicator lights. The let-
ters ÒI FITÓ and three moving indicators will appear
in the LED matrix.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.
Insert the iFit.com CD or videocassette.
3
If you are using an iFit.com CD, insert the CD into
your CD player. If you are using an iFit.com video-
cassette, insert the videocassette into your VCR.
Press the PLAY button on your CD player or
VCR.
4
B
A moment after the button is pressed, your personal
trainer will begin guiding you through your workout.
Simply follow your personal trainerÕs instructions.
Note: If the TIME display is flashing, press the
START button or the SPEED + button on the con-
sole. The treadmill will not respond to a CD or video
program when the TIME display is flashing.
AN. IT
N
VIDEOAUDIO
IN
RF OUT
CH
3
4
OUT
RCA Adapter
Adapter
Audio
Cable
During the CD or video program, an electronic
ÒchirpingÓ sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the ÒchirpÓ and be
prepared for speed and/or incline changes. In
some instances, the speed and/or incline may
change before the personal trainer describes
the change.
Wire removed from
AUDIO OUT jack
16
Download from Www.Somanuals.com. All Manuals Search And Download.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the SPEED or INCLINE buttons
on the console. However, when the next ÒchirpÓ
is heard, the speed and/or incline will change
to the next settings of the CD or video program.
Note: If the speed or incline of the treadmill
does not change when a ÒchirpÓ is heard:
¥ make sure that the IFit.com indicator is lit and
that the TIME display is not flashing. If the
TIME display is flashing, press the START
button or the SPEED + button on the console.
To stop the walking belt at any time, press the
STOP button on the console. The TIME display
will begin to flash. To restart the program, press
the START button or the SPEED + button. After a
moment, the walking belt will begin to move at 1.0
mph. When the next ÒchirpÓ is heard, the
speed and incline will change to the next set-
tings of the CD or video program. The program
can also be stopped by pressing the stop button
on your CD player or VCR.
¥ adjust the volume of your CD player or VCR. If
the volume is too high or too low, the console
may not detect the program signals.
¥ make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord.
¥ if you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console.
When the CD or video program is completed, the
walking belt will stop and the TIME display will
begin to flash. Note: To use another CD or video
program, press the STOP button or remove the
key and go to step 1 on page 16.
Follow your progress with the LED displays.
See step 5 on page 11.
5
6
When the program is finished, remove the key.
See step 6 on page 11.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to the treadmill and stand on the foot
rails. Find the clip attached to the key and slide
the key onto the waistband of your clothing.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR INTERNET SITE
7
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking. During the program, an electronic
ÒchirpingÓ sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the ÒchirpÓ and be
prepared for speed and/or incline changes.
access a selection of programs that interactively con-
trol your treadmill to help you achieve your specific ex-
ercise goals. In addition, you can play iFit.com audio
and video programs directly from the internet. By
adding an optional iFit.com module to the console, you
can use virtually endless features from our internet site.
tional iFit.com module, call toll-free 1-800-884-0620.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the SPEED or INCLINE buttons
on the console. However, when the next ÒchirpÓ
is heard, the speed and/or incline will change
to the next settings of the program.
To use programs from our internet site, the treadmill
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 14. In
addition, you must have an internet connection and
an internet service provider. A list of specific system
requirements will be found on our internet site. Follow
the steps below to use a program from our internet site.
To stop the walking belt at any time, press the
STOP button on the console. The TIME display
will begin to flash. To restart the program, press
the START button or the SPEED + button. After a
moment, the walking belt will begin to move at 1.0
mph. When the next ÒchirpÓ is heard, the
speed and incline will change to the next set-
tings of the program.
Insert the key into the console.
1
See HOW TO TURN ON THE POWER on page 10.
Select the iFit.com mode.
2
When the key is in-
serted, the manual
When the program is completed, the walking belt
will stop and the TIME display will begin to flash.
Note: To use another program, press the STOP
button and go to step 5.
mode will be selected.
To use an iFit.com CD
or video program, press
the MODE button re-
peatedly until the iFit.com indicator lights. The let-
ters ÒI FITÓ and three moving indicators will appear
in the LED matrix.
Note: If the speed or incline of the treadmill
does not change when a ÒchirpÓ is heard, make
sure that the iFit.com indicator is lit and that
the TIME display is not flashing. In addition,
make sure that the audio cable is properly con-
nected, that it is fully plugged in, and that it is
not wrapped around a power cord.
Go to your computer and start an internet
connection.
3
Start your web browser, if necessary, and go to
Follow your progress with the LED displays.
See step 5 on page 11.
4
8
9
Follow the desired links on our internet site to
select a program.
5
When the program is finished, remove the key.
See step 6 on page 11.
Read and follow the on-line instructions for using a
program.
Follow the on-line instructions to start the
program.
6
When you start the program, an on-screen count-
down will begin.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
1
Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. CAUTION: To decrease the possibility of in-
jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back. Raise the treadmill about halfway
to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, slide the lock knob
2
Open
to the left and hold it. Raise the treadmill until the lock pin
is aligned with the hole in the catch. Slowly release the
lock knob so that the lock pin slides into the catch. Make
sure that the lock pin is inserted into the catch.
Lock
Knob
Closed
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85¡ Fahrenheit.
Lock Pin
Catch
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the lock-
ing pin is inserted into the left handrail.
Book Holder
1. Hold the handrails as shown and place one foot against
the hood only in the location shown. Do not hold or
push on the book holder or it may be damaged.
2. Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.
Base
Hood
3. Place one foot on the base and carefully lower the tread-
mill until it is resting in the storage position.
HOW TO LOWER THE TREADMILL FOR USE
1. Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your left
hand, slide the lock knob to the left. Pivot the treadmill down until the frame is past the lock pin.
2. Refer to drawing 1 above. Hold the treadmill firmly with both hands and lower the treadmill to the floor.
CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE-SHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-
free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is
plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page
7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or
less in length.
b. After the power cord has been plugged in, make sure that the key is inserted into the console as
far as it will go.
c. Check the circuit breaker located on the treadmill
c
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
Tripped
Reset
d
d. Check the on/off switch located on the treadmill
near the power cord. The switch must be in the on
position.
On
Position
PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the
circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key into the console as far as it will go.
d. Make sure that the on/off switch is in the on position.
e. If the treadmill still will not run, please call our Customer Service Department, toll-free.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Remove the key from the console and unplug the
118
power cord. Next, remove the two Short Hood
Screws (118) from the Motor Hood (62). Pivot the
Uprights (39) in the direction shown by the arrow until
the handles are resting on the floor. Note: It will be
easier and safer to perform this operation with two
people.
41
39
62
Locate the two Screws (41) in the space between the
front edge of the Motor Hood (62) and the treadmill.
Remove the Screws.
118
Return the Uprights (39) to the vertical position. Lift off the Motor Hood (62), being careful not to
damage the hook and loop fasteners on the front of the belly pan.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Locate the Reed Switch (59) and the Magnet (117) on
the left side of the Pulley (8). Turn the Pulley until the
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 1/8Ó. If necessary, loosen the Screw
(64) and move the Reed Switch slightly. Retighten the
Screw.
1/8Ó
64
8
59
117
Top
View
Re-attach the Motor Hood (62) and run the treadmill
for a few minutes to check for a correct speed reading.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less.
b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be
b
permanently damaged. Remove the key and UN-
PLUG THE POWER CORD. Using the allen wrench,
turn both rear roller adjustment bolts counterclockwise,
1/4 of a turn. When the walking belt is properly tight-
ened, you should be able to lift each side of the walking
belt 3 to 4 inches off the walking platform. Be careful to
keep the walking belt centered. Plug in the power cord,
insert the key and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
3ÓÐ4Ó
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our Customer Service Department, toll-free.
PROBLEM: The walking belt is off-center
SOLUTION: a. If the walking belt has shifted to the left, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn the
left rear roller adjustment bolt clockwise, and the right bolt counter-
clockwise, 1/4 of a turn each. Be careful not to overtighten the walk-
ing belt. Plug in the power cord, insert the key and run the treadmill
for a few minutes. Repeat until the walking belt is centered.
a
b. If the walking belt has shifted to the right, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn the
left rear roller adjustment bolt counterclockwise, and the right bolt
clockwise, 1/4 of a turn each. Be careful not to overtighten the walk-
ing belt. Plug in the power cord, insert the key and run the treadmill
for a few minutes. Repeat until the walking belt is centered.
b
c. If the walking belt slips when walked on, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn both
rear roller adjustment bolts clockwise, 1/4 of a turn. When the walk-
ing belt is correctly tightened, you should be able to lift each side of
the walking belt 3 to 4 inches off the walking platform. Be careful to
keep the walking belt centered. Plug in the power cord, insert the
key and carefully walk on the treadmill for a few minutes. Repeat
until the walking belt is properly tightened.
c
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFit.com
CDÕs and videos are played
SOLUTION: a. With the key in the console, press one of the incline buttons. While the incline is changing, re-
move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the
maximum incline level and then return to the minimum level. This will recalibrate the incline system.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
REEBOK UNIVERSITY
Reebok University was launched in 1993 to fulfill a
vision to establish a Òuniversity without wallsÓ that
develops quality, researched, state-of-the-art fitness
programming for the fitness industry throughout the
world.
WALKING AND REDUCED RISK FOR CARDIOVAS-
CULAR DISEASE
Several studies have found that regular walking at any
speed can increase HDL-C cholesterol (a high-density
lipoprotein which removes excess cholesterol from the
body) and can lower concentrations of blood triglyc-
erides (a storage form of fat), thus reducing the risk for
Working with the worldÕs best professionals, Reebok
University has created a host of original programs,
such as Step Reebok¨, Walk ReebokSM, Slide ReebokSM cardiovascular disease.
and Reebok City JamSM. The industry has adopted
Reebok programming as the ÒgoldÓ standard. Our
guidelines and terminology are used by fitness profes-
sionals and participants around the world, and our
exceptional programming has been approved in the
United States by AFAA and ACE for continuing educa-
tion credits.
Duncan and his colleagues3 concluded that exercise
does not have to be vigorous to reduce cardiovascular
risk factors. In other words, people who choose to
stroll rather than walk briskly can reduce their risk for
cardiovascular disease.
After studying the physical activity patterns of 17,000
Harvard alumni over a 20-year period, Paffenbarger
and his colleagues4 concluded that walking as little as
five city blocks per day can reduce the risk of cardio-
vascular disease, and walking 2 miles per day can
reduce the risk of a heart attack by 28% or more.
Therefore, while walking at a fast pace will improve
aerobic fitness, walking at any speed (slow or fast) can
reduce a person's risk for heart disease.
WALKING AND CARDIORESPIRATORY
ENDURANCE
Scientific studies confirm that
walking at a moderate to brisk
pace can enhance aero-
bic fitness. Rippe and
his colleagues1 found
that of 500 subjects
tested, 67% of the men
and 90% of the women
were able to reach their
target heart rates by
walking 4 to 4.5 miles
per hour.
WALKING AND WEIGHT REDUCTION
Walking is an excellent activity for burning calories.
The steeper the incline and/or the faster the speed, the
more calories are burned. For example, a 150-pound
person walking at 3.5 miles per hour on flat ground will
burn about 300 calories per hour. This same person
will burn 400 calories per hour on a gentle 4% incline
and 500 calories per hour on a steeper 10% incline. If
this person speeds the pace up to 4 miles per hour on
level ground, 350 calories will be burned in one hour.5
Pollock and his colleagues2 found that middle-aged
men who walked at a pace of 3.5 to 4.5 miles per hour
for 40 minutes four times per week had the same car-
diovascular improvements as men the same age who
jogged for 30 minutes three times per week. Although
the intensity of exercise was lower for the walkers than
the runners, the increased duration and frequency of
walking provided the walkers with similar aerobic ben-
efits as the runners.
It should be noted that participants who do not wish to
walk at faster speeds can burn a comparable number
of calories by walking for longer periods of time.
WALKING AND BONE DENSITY
Osteoporosis is a major health problem in the United
States, affecting an estimated 15 to 30 million people.
An age-related disorder, osteoporosis reduces the
density of bones. This disease can be life-threatening
since many older people die as a result of complica-
tions suffered from broken bones. Adequate calcium in
the diet and weight-bearing exercises seem to reduce
the risk of osteoporosis.
On the basis of current research, it seems clear that
walking at a moderate to brisk pace can be an excel-
lent aerobic activity.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Several studies have reported that regular walking at
moderate to brisk speeds appears to increase bone
density. Specifically, Fradin and his colleagues6 found
that 70-year-old subjects who walked at least 30 min-
utes per day had higher bone mineral content than
subjects who walked less than 30 minutes per day.
Jones and his colleagues7 reported that sedentary
women (aged 30 to 61 years old) who began a regular
walking program and continued for one year increased
their bone density.
During a 24-week study, not one of 59 participants
who walked five days a week at speeds between 3 and
5 miles per hour sustained a walking-related injury that
necessitated consulting with a physician. Carroll and
his colleagues10 reported that 14% of the elderly sub-
jects participating in a walking study suffered training-
related orthopedic injuries, mostly to the lower leg and
foot. The majority of injuries occurred in the group as-
signed to "fast walking."
It is important to note that all forms of exercise have
some degree of risk associated with the activity.
Generally, the less mechanical stress on the muscu-
loskeletal system, the less risk of becoming injured.
Because of the low-impact nature of walking, the inci-
dence of injury appears to be low when compared to
other high-impact activities.
Since walking can be comfortably performed by people
of any age, walking appears to be practical and effec-
tive in reducing a person's risk for developing osteo-
porosis.
WALKING AND STRESS REDUCTION
There are many stressors in today's society, including
economic concerns, work-related pressures and the
need to balance career goals with home responsibili-
ties. People who are unable to cope with these types
of stressors are often tense and anxious, and may
even become physically or psychologically ill.
REFERENCES
1. Rippe, J., Ross, J., et. al. ÒCardiovascular effects of walking.Ó
(Abstract), Proceedings of the Second International Conference
on Physical Activity, Aging and Sports, July, 1985, p. 47.
2. Pollock, M., Miller, H. Jr., et. al. ÒEffects of walking on body com-
position and cardiovascular function of middle-aged men.Ó
Journal of Applied Physiology, 1971, 30:126Ð130.
3. Duncan, J., Gordon, N., et. al. ÒWomen walking for health and fit-
ness. How much is enough?Ó Journal of the American Medical
Association, 1991, 266(23):3295Ð9.
4. Paffenbarger, R., Hyde, R., et.al. ÒPhysical activity, all-cause
mortality and longevity of college alumni.Ó New England Journal
of Medicine, 1986, 314:605Ð613.
Researchers have found that exercise is one way to
help people reduce stress. For example, subjects who
engaged in a regular aerobic conditioning program and
who altered their diets experienced significant gains in
self-concept, feelings of well-being and reduced
depression.8
5. ÒBetter walking workouts.Ó University of California at Berkeley
Wellness Letter, 1992, 8(12):4Ð5.
6. Fradin, K. Grimby, G., et. al. ÒWalking habits and health-related
factors in a 70-year-old population,Ó Gerontology, 1991,
37(5):281Ð8.
7. Jones, P., Hardman, A., et. al. ÒInfluence of brisk walking on the
broadband ultrasonic attenuation of the calcaneus in previously
sedentary women aged 30Ð61 years.Ó Calcified Tissue
International, 1991, 49(2):112Ð5.
Cramer and his colleagues9 specifically examined the
effect of brisk walking on mildly obese sedentary
women and found that walking improved general psy-
chological well-being. Walking therefore appears to be
an effective tool for improving psychological well-being.
8. Blair, S., Collingwood, T., et. al. ÒHealth Promotion for Educators:
Impact on Health Behaviors, Satisfaction, and General Well-
Being,Ó American Journal of Public Health, 1984, 74:147Ð49.
9. Cramer, S., Nieman D., et. al. ÒThe effects of moderate exercise
training on psychological well-being and mood state in women.Ó
Journal of Psychosomatic Research, 1991, 35(4Ð5):437Ð49.
10. Carroll, J., Pollack, M., et. al. ÒIncidence of injury during moder-
ate and high intensity walking in the elderly.Ó Journal of
Gerontology, 1992, 47(3):M61Ð6.
WALKING AND INJURIES
Walking is often associated with a low injury rate.
Walking is considered to be a "low impact" activity be-
cause one foot remains in contact with the ground at
all times. Walking at speeds of 3 miles per hour pro-
duces vertical impact forces that are around 1.25 times
body weight, whereas running at 7 miles per hour in-
creases vertical impact forces to more than 2.5 times
body weight.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
Fat Burning
WARNING:
Before beginning this
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for en-
ergy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the speed or incline of the tread-
mill until your heart rate is near the lowest number in
your training zone.
or any exercise program, consult your physi-
cian. This is especially important for individu-
als over the age of 35 or individuals with pre-
existing health problems.
The following guidelines will help you to plan your ex-
ercise program. RememberÑthese are general guide-
lines only. For more detailed exercise information, ob-
tain a reputable book or consult your physician.
For maximum fat burning, adjust the speed or incline
of the treadmill until your heart rate is near the middle
number in your training zone.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
Aerobic Exercise
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning and aerobic exercise.
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for pro-
longed periods of time. This increases the demand on
the heart to pump blood to the muscles and on the
lungs to oxygenate the blood. For aerobic exercise, ad-
just the speed or incline of the treadmill until your heart
rate is near the highest number in your training zone.
WORKOUT GUIDELINES
Each workout should include the following three parts:
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your Òtrain-
ing zone.Ó The lower two numbers are recommended
heart rates for fat burning and the higher number is the
recommended heart rate for aerobic exercise.
A Warm-upÑStart each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up in-
creases your body temperature, heart rate and circula-
tion in preparation for exercise.
Training Zone ExerciseÑAfter warming up, increase
the intensity of your exercise until your heart rate is in
your training zone for 20 to 60 minutes. (During the
first few weeks of your exercise program, do not keep
your heart rate in your training zone for longer than 20
minutes.) Breathe regularly and deeply as you exer-
ciseÑnever hold your breath.
To measure your
heart rate, stop
exercising and
place two fingers on
your wrist as shown.
Take a six-second
heartbeat count,
and multiply the
result by ten to find
your heart rate.
A Cool-downÑFinish each workout with 5 to 10 min-
utes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-ex-
ercise problems.
(A six-second count is used because your heart rate
drops quickly when you stop exercising.) If your heart
rate is too high or too low, adjust the speed or incline
of the treadmill accordingly.
Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months, you may
complete up to five workouts each week if desired.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretchÑnever bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
1
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
2
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your
back foot flat on the floor. Bend your front leg, lean forward and
3
move your hips toward the wall. Hold for 15 counts, then relax.
Repeat 3 times for each leg. To cause further stretching of the
achilles tendons, bend your back leg as well. Stretches:
4
Calves, achilles tendons and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold
for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
5
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LISTÑMODEL NO. RBTL11990
R0300A
To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
2
1
4
2
2
18
4
1
1
1
1
1
1
1
1
1
1
2
3
1
1
1
1
1
1
1
1
1
4
2
16
1
2
1
1
1
35
2
2
1
1
1
2
1
1
1
Left Foot Rail
51
52
53
54
55
56
57
58*
59
60
61
62
63
64
65
66
67
68
69
70**
71
72
73**
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
1
1
2
4
2
1
1
1
1
1
1
1
1
22
1
4
2
1
1
1
1
2
1
4
2
4
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
4
2
1
1
6
1
2
4
1
12Ó Audio Wire
10Õ IFit.com Audio Cable
Foam Grip
Motor Nut
Static Warning Decal
Motor
8Ó Wire Harness
Motor/Pulley/Flywheel/Fan
Reed Switch/Sensor Wire
Sensor Wire
Incline Motor Bolt (Lower)
Motor Hood
Controller
Front Roller Nut
Front Left Endcap
Key/Clip
Frame Pivot Spacer
Front Roller/Pulley
Platform Screw
Belt Guide
Caution Decal
Isolator Spacer Screw
Isolator
Rear Foot (Right)
Walking Belt
Walking Platform
Latch Catch
Latch Assembly
Lock Knob
Lock Knob Sleeve
Lock Knob Spring
Lock Pin Collar
Frame
Rear Roller Adj. Bolt
Roller Adj. Washer
Right Rear Endcap
8Ó Cable Tie
9
10
11
12
13
14
15
16*
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Electronics Screw
Power Supply
Plastic Stand-Off
Hood Bracket (Front)
Electronics Plate
Hood Support Bracket
IFit.com Videocassette
Lift Frame
Hood Bracket (Side)
Optional Heart Rate Monitor
Isolator Spacer
Rear Endcap Spacer
Isolator Shim
Motor Pivot Nut
Incline Motor Bolt
Front Roller Adj. Bolt
Allen Wrench
24Ó Reed Switch
Incline Motor
Front Belly Pan
Power Cord
On/Off Switch
Circuit Breaker
Power Cord Grommet
Incline Motor Shield
Front Wheel Bolt
Front Wheel
Right Foot Rail
Bumper
Grommet
Wire Harness
Shock
4Ó Cable Tie
Releasable Wire Tie
Reed Switch Clip
Tie Clamp
Belly Pan
Latch Decal
Rear Foot (Left)
Platform Screw (Front)
Frame Bolt
Belly Pan Fastener
Front Right Endcap
Ground Screw
Ground Wire
Upright/Base
Pin Clip
Screw
Left Pulse Pad
Right Pulse Pad (Top)
Console Base
Motor Belt
Console Base (Bottom)
Motor Tension Bolt
Reading Rack
Lock Pin
Wheel Nut
Rear Roller
Upright Endcap
Upright Endcap Screw
Left Rear Endcap
Incline Stop Bracket
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Key No. Qty.
Description
Key No. Qty.
Description
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119**
120**
#
2
2
1
2
2
1
2
1
1
1
2
1
8
1
1
1
1
2
1
1
1
Nylon Washer
Incline Spacer
Console
#
#
#
#
#
#
#
#
#
1
1
1
1
1
1
1
1
1
8Ó Blue Wire, 2 F
8Ó Blue Wire, M/F
14Ó White Wire, 2 F
8Ó White Wire, M/F
8Ó Red Wire, M/F
9Ó Black Wire M/F
4Ó Black Wire, 2 F
8Ó Green Wire, F/Ring
User's Manual
Motor Tension Washer
Motor Star Washer
Motor Pivot Bolt
Wheel Spacer
Flywheel/Pulley/Fan
Motor Tension Nut
Motor Adj. Nut
Hood Fastener
Jack
Console Base Screw (Side)
Receiver Foam
Sensor Foam
Pulse Receiver
Magnet
* Includes all parts shown in the box
# These parts are not illustrated
**These parts are optional. For information about the
iFit.com module, call toll-free 1-800-884-0620. For in-
formation about iFit.com CDÕs or videocassettes, call
toll-free 1-800-735-0768
Short Hood Screw
IFit.com Module
IFit.com CD
Specifications are subject to change without notice
10Ó Blue Wire, 2 F
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
¥ The MODEL NUMBER of the product (RBTL11990)
¥ The NAME of the product (REEBOK¨ ACD1 treadmill)
¥ The SERIAL NUMBER of the product (see the front cover of this manual)
¥ The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on pages 26 and 27).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
WHAT IS COVEREDÑThe entire REEBOK¨ ACD1 (ÒProductÓ) is warranted to be free of all defects in material and work-
manship.
WHO IS COVEREDÑThe original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IS IT COVEREDÑICON Health & Fitness, Inc. (ÒICONÓ), warrants the hood, covers, belly pan, and decals for
six months after the date of purchase. The motor is covered for three years after the date of purchase. The belt and deck
are covered for two years after the date of purchase. All mechanical components are covered for two years after the date of
purchase. All electrical components are covered for two years after the date of purchase. Labor is covered for one year.
WHAT WE DO TO CORRECT COVERED DEFECTSÑWe will ship to you, without charge, any replacement part or com-
ponent, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service
provider, or, at our option, we will replace the Product.
WHAT IS NOT COVEREDÑAny failures or damage caused by unauthorized service, misuse, accident, negligence, im-
proper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use,
operate, and maintain as set out in your UserÕs Manual (ÒManualÓ).
WHAT YOU MUST DOÑAlways retain proof of purchase, such as your bill of sale; store, operate, and maintain the
Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of
the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.
USERÕS MANUALÑIt is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to
do the periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfac-
tion.
HOW TO GET PARTS AND SERVICEÑSimply call our Customer Service Department at 1-800-999-3756 and tell them
your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary,
arrange for service where your Product is located or advise you how to ship the Product for service. Before shipping, al-
ways obtain a Return Authorization Number (RA No.) from our Customer Service Department; securely pack your Product
(save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the product. Include a
letter explaining the product or problem and a copy of your proof of purchase if you believe the service is covered by war-
ranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use
or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits,
loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states
do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not
apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or
fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow
limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 161372 R0300A
Printed in USA © 2000 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|