5850-93110 (9809)
OWNER/OPERATOR MANUAL
TRIMMERS / STICK EDGERS
BT2200LDC
BC2200E
BC2200LDC
HE2200LDC
BT2200LDC
BC2200E
BC2200LDC
HE2200LDC
IMPORTANT :
Before operating your RedMax product,
read this manual carefully and completely.
WARNING
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for choosing a RedMax trimmer / stick edger.
This manual will provide you with full understanding of the
necessary instructions for assembly, operation and
maintenance of the equipment.
Please read this manual carefully before starting operation.
For continued safe and reliable operation, use ONLY
original RedMax parts and accessories, Adhere to all notes
and warnings.
CONTENTS
FOR SAFE OPERATION · · · · · · · · · · · · · · · · · · · · · · 2
SETUP · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3
FUEL · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4
OPERATION · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
MAINTENANCE · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9
SPECIFICATIONS · · · · · · · · · · · · · · · · · · · · · · · · · · 13
PARTS LIST · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 14
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR SAFE OPERATION
■ KNOW YOUR UNIT
■ OPERATE YOUR UNIT SAFELY
1.Read this Owner's Manual carefully until
you completely understand and can follow
all safety rules, precautions, and operating
instructions before operating the unit.
2.Restrict your unit to users who understand
and follow all safety rules, precautions, and
operating instructions found in this manual.
Children should not be allowed to operate
this unit.
1.Inspect the entire unit before each use for
worn, loose, or damaged parts. Do not use
until the unit is in proper working order.
2.Keep the handles free of oil and fuel.
3. Never start or run the engine inside a
closed room or building, Exhaust fumes
contain dangerous carbon monoxide.
4. Keep the engine idle speed adjusted
properly so that the cutting head comes to a
complete stop when trigger is released.
5.Be sure to stop the engine before refueling,
inspecting or leaving the unit unattended.
6.Always use both hands to hold the unit.
7.Do not use any accessory or attachment
other than those bearing the RedMax mark
and are recommended for the unit.
■ PLAN AHEAD
1. Dress in a long-sleeved shirt and long
pants. Wear protective gloves and shoes.
Eye and ear protection should be worn at
all times. Do not wear loose clothing,
jewelry, short pants or sandals. Do not go
barefoot.
2.Guard against hazardous situations at all
times. Warn adults to keep pets and
children away from the work area. Establish
a safe method for gaining your attention
during operation. Be careful if you are
approached.
3.Do not operate the unit when you are tired,
ill or upset; or if you are under the influence
of alcohol, drugs, or medication.
4. Inspect the work site before each use.
Remove all debris and objects that could be
thrown, become entangled in the cutting
head, or cause damage during operation.
■ MAINTAIN YOUR UNIT PROPERLY
1. Disconnect the spark plug before
performing all maintenance except for
carburetor adjustment.
2. Use only recommended, genuine
replacement parts to avoid creating hazard
and/or voiding your warranty.
3.Wear protective gloves when handling or
performing maintenance on metal blades.
4.When transporting or storing the unit, drain
fuel from the fuel tank.
5.Do not store the unit or fuel in a closed area
where fuel vapors can reach an open flame
from hot water heaters, furnaces, and so
on.
■ HANDLE FUEL WITH CAUTION
1.Eliminate all sources of sparks or flame
(including smoking, open flames, or work
that could cause sparks) in the area where
fuel is mixed, poured, or stored.
2.Mix, pour, and store fuel in an approved,
marked container and in a well ventilated
area.
6.Store the unit in a dry area out of the of
children.
7. All engine service, other than those
explained in this manual, should be
performed by competent service personnel.
Improper service to the muffler and flywheel
could cause serious accidents, resulting in
bodily injury.
3.Be sure to stop the engine before refueling
the unit.
4.Do not smoke while handling fuel or while
operating the unit.
5.Wipe up all spills before starting the engine.
Move at least 10 feet (3 meters) away from
fuel and refueling site before starting the
engine.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
■ HE2200LDC
1.Install the blade guard to the gear case with
the provided 3 screws.
1.Install the driveshaft assembly to the engine
unit. Clamp it securely with the attached
bolt and nut.
HE2200LDC
2.Place the blade between the cutter holders
(A) and (B) while locking the gear shaft by
putting the bar , one of the tools provided,
through the key holes on the holder(A) and
the gearcase. Use the socket and the bar
as shown in the picture below to tighten the
mounting nut.
2.Connect the throttle cable to the engine.
3.Mount the handle to the driveshaft casing
and clamp it at a position suitable for
operation.
4.Install the debris guard to the bracket with
screws provided.
BT2200LDC
3.Install the J-shaped handle to the shaft tube
and clamp at a position best for your job.
Attach the guard above the clamp and slide
it down. Rotate it a half turn to set in place.
BC2200E
• ADJUSTING HANDLE POSITION
Loosen the handle bracket screws and
reposition the handle to your best operating
position. Re-tighten the screws.
BC2200LDC
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FUEL
The RedMax engines are lubricated by oil
specially formulated for air-cooled 2-cycle
gasoline engine use. When RedMax oil is not
available, use an anti-oxidant added quality oil
formulated for air-cooled 2-cycle engine use.
■ FUELING UNIT
1.Untwist and remove the fuel cap. Rest the
cap on a dustless place.
2.Put fuel into the fuel tank to 8O% of the full
capacity.
RECOMMENDED MIXING RATIO
GASOLINE 32 : OIL 1
3.Fasten the fuel cap securely and wipe up
any fuel spillage around the unit.
Exhaust emission are controlled by the
fundamental engine parameters and
components (eq., carburation, ignition timing
and port timing) without addition of any major
hardware or the introduction of an inert
material during combustion.
CAUTION :
1.Select bare ground for fueling.
2.Move at least 10 feet (3 meters) away from
the fueling point before starting the engine.
3.Stop the engine before refueling the unit.
These engines are certified to operate on
unleaded gasoline.
TO KEEP YOUR ENGINE WORKING
EFFICIENTLY
1.FUEL WITH NO OIL (RAW GASOLINE) —
It will cause severe damage to the system.
WARING!!!
The fuel is highly flammable. Do not
smoke or bring any flame or sparks near
fuel.
2.GASOHOL — It can cause deterioration of
rubber and/or plastic parts and disruption of
engine lubrication.
■ HOW TO MIX FUEL
3. OIL FOR 4-CYCLE ENGINE USE or
WATER COOLED 2-CYCLE ENGINE USE
— It can cause spark plug fouling, exhaust
port blocking, or piston ring sticking.
1.Mix the fuel and oil at 32 : 1
2. Put some of the gasoline into a clean,
approved fuel container.
3.Pour in all of the oil and agitate well.
4. Pour in the rest of gasoline and agitate
again for at least one minute.
5.Put a clear indication on the outside of the
container to avoid mixing up with gasoline
or other containers.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
■ STARTING ENGINE
NOTE :
Avoid pulling the rope to its dead end or
returning it by releasing the knob. Such
actions can cause starter failures.
WARING!!!
Keep the cutting head off the ground and
clear of surrounding objects as it will start
rotating upon starting of the engine.
4.When the engine has started, move the
choke lever gradually upward to open
choke.
5. Allow the engine to warm up for a half
minute before starting operation.
1.Press the primer bulb until fuel flows out in
the clear tube (5 to 7 times). Lace the
choke lever in the full choke position. When
restarting the engine right after stopping it,
keep the choke open.
NOTE :
1.When restarting the engine immediately
after stopping it, leave choke open.
2.Overchoking can make the engine hard to
start due to excess fuel. When the engine
fails to start after several attempts, open
choke and repeat pulling the rope or
remove the spark plug and dry it.
■ STOPPING ENGINE
1. Release the throttle trigger and run the
engine for a half minute.
2.Put the ignition switch in the "OFF" position.
2.Put the ignition switch in the "ON" position.
NOTE :
Except for an emergency, avoid stopping the
engine while the trigger is on.
■ ADJUSTING IDLING SPEED
1.When the engine tends to stop frequently at
idling mode, turn the adjusting screw
clockwise.
Idling speed : 2800rpm
2.When the cutting head keeps rotating after
releasing the trigger, turn the adjusting
screw counter clockwise.
3.Rest the unit on a flat, firm place. While
pulling the throttle trigger with the little
finger of your left hand, pull the starter rope
quickly.
NOTE :
Warm up the engine before adjusting the
idling speed.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
■ LINE HEAD USAGE
• HOW TO USE
WARING!!!
• ADJUSTING LINE LENGTH
Your trimmer is equipped with a bump head
that allows the operator to advance the line
without stopping the engine. When the line
becomes short, lightly tap the head on the
ground while running the engine at full
throttle. Each time the head is bumped, the
line advances about 1 inch (25.4 mm). For
best results, tap the head on bare ground or
hard soil. If line release is attempted in tall
grass, the engine may stall.
1. Always wear eye protection such as
safety goggles. Never lean over the
rotating cutting head. Rocks or other
debris could be thrown into eyes and
face and cause serious personal Injury.
2.Keep the debris guard attached in place
at all times when the unit is operated.
NOTE :
• TRIMMING GRASS AND WEEDS
Always keep the trimming line fully extended.
Line release becomes difficult as the cutting
line becomes shorter.
Always remember that the TIP of the line
does cutting. You will achieve better results
by not crowding the line into the cutting area.
Allow the unit to trim at its own pace.
1.Hold the unit so the cutting head is off the
ground and tilted about 30 degrees toward
the sweep direction.
2.Use full throttle when cutting.
3.You can avoid thrown debris by sweeping in
the correct direction, I.e., from your right to
the left for BT2200LDC & BC2200E, and
from your left to the right for BC2200LDC.
4.Use a slow, deliberate action to cut heavy
growth. The rate of cutting motion will
depend on the material being cut. Heavy
growth will require slower action than will
light growth.
5.Never swing the unit too hard because you
may lose your balance or control of the unit.
6.Try to control the cutting motion with the hip
rather than placing the full workload on the
arms and hands.
7.Take precautions to avoid wire, grass and
dead, dry, long-stem weeds from wrapping
around the cutting head shaft. Such
materials can stall the cutting head and
cause the clutch to slip, resulting in damage
to the clutch system, if repeated frequently.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
■ METAL BLADE USAGE
WARING!!!
NOTE :
The operator must keep his own path of
advance clear due to the possibility of
swinging around and seriously injuring a
bystander or helper.
Do not use the Metal Cutting Blade for
model BT2200LDC and BC2200E
• Always cut by guiding the head from your
right to left.
CONTROLLING BLADE BOUNCE
• When mowing a wide area, start working
from the left side to avoid interference of cut
grass.
• A metal blade cuts best up to the point 1/3
from the edge. Use that area for cutting
shrubs, tough and thick weeds. For cutting
young grass, you can use up to 2/3 from the
tip of blade.
Blade bounce can cause serious personal
injury. Carefully study this section. It is
important that you understand what causes
bounce, how you can reduce the chance of
bounce and how you can remain in control of
the unit if bounce does occur.
1. What causes blade bounce:
Bounce can occur when the moving blade
contacts an object that it cannot cut.
Never cut with
this side
This contact causes the blade to stop for an
instant and then suddenly move or “bounce”
away from the object that was hit. The
operator can lose control of the unit and the
blade can cause serious personal injury to the
operator or any person nearby if the blade
contacts any part of the body.
Tough weeds
Young grass
2. How you can reduce the chance of blade
bounce:
Note :
Do not use the Metal Cutting Blade for
cutting trees or thick branches. The blade is
designed to cut grass, weeds or shrubs
only.
a.Recognize that bounce can happen. By
understanding and knowing about
bounce, you can help eliminate the
element of surprise.
WARING!!!
b.Cut fibrous weeds and grass only. Do
not let the blade contact materials it
cannot cut such as hard, woody vines
and brush or rocks, fences, metal, etc.
Working on a slope increases the danger
of losing your balance. Do not use your
unit on a slope until you have mastered its
operation.
c.Be extra prepared for bounce if you must
cut where you cannot see the blade
making contact such as in areas of
dense growth.
FOR SAFE OPERATION ON A SLOPE:
1.Always use anti-slip shoes.
2.Do not work in and/or right after the rain
when the ground is wet and slippery.
d. Keep the blade sharp. A dull blade
increases the chance of bounce.
3.Do not use your unit on a slope where firm
footholds are not secured.
e.Cut only at full throttle.
f.Avoid feeding the blade too rapidly. The
blade can bounce away from material
being cut if the blade is fed faster than its
cutting capability.
4.Do not cut material above your waist or
below your ankle.
5.Be sure to stop the engine moving to the
next row.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
g.Cut only from your right to your left.
TO SHARPEN BLADE :
h. Keep your path of advance clear of
material that has been cut and other
debris.
1.Grind away each cutting edge and its back
evenly and maintain similar shape to
original.
3. How you can maintain the best control:
2.Sharpen each cutting edge and make sure
the bottom corner is rounded.
a.Keep a good, firm grip on the unit with
both hands. A firm grip can help
neutralize bounce. Keep your right and
left hands completely around the
respective handles.
.10"R
.15"R
b. Keep both feet spread apart in a
comfortable stance and yet braced for
the possibility that the unit could bounce.
Do not overreach. Keep firm footing and
balance.
WARING!!!
• If edge bottom is finished square, the
blade will tend to crack from the corner
during operation.
c.Always use the shoulder harness. Adjust
the harness for comfort before starting
the engine. The harness should be
adjusted so the left hand can
comfortably hold the handlebar grip
approximately waist high.
• Do not cool the blade with water in case
of using grinder. It may cause cracks on
blade.
d.Do not cut material waist high or over to
avoid loss of unit control.
e.Do not swing the unit with such force that
you are in danger of losing your balance.
WARING!!!
Stop engine before removing grass or
weed wrappings to avoid injury from
accidental blade rotation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
I. Bump head for BT2200LDC and BC2200E
■ REPLACING TRIMMING LINE
To refill a new trimming line either ;
A : Install the prewound reel #153577 or
B : Rewind the existing reel.
For replacement line, use a diameter of .080
in (2.03 mm). The engine may overheat and
fail if you use a larger line. For safety reason,
do not use metal-reinforced line.
• WINDING NEW LINE
1.Take 25 ft (7.6 m) of new trimming line,
insert one end through either hole on the
inner reel and put the other end through
another hole. Hold the line where the both
ends are matching and pull it to make the
loop as small as possible.
A : REWINDING THE EXISTING SPOOL
• DISASSEMBLING THE HEAD
1.Hold the outer spool with one hand and
unscrew the Bump Knob bolt (counter-
clockwise for BT2200LDC and BC2200E).
Inspect the captured bolt inside the Bump
Knob to make sure it moves freely. Replace
the Bump Knob if it is damaged.
BT2200LDC
BC2200E
2.Wind the line in the direction indicated on
the inner reel, in even and tight layers. Be
sure not to overlap the two ends of the line.
2.Remove the inner reel. Use a clean cloth to
clean the inner reel, the inside of the outer
spool and the center shaft.
3.Insert each end of the line into the holding
slot.
3.Inspect the indexing teeth on the inner reel
and outer spool for wear and, if necessary,
deburr or replace the reel and spool.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
• INSTALLING THE REEL
2.Hold the inner reel in place and screw in the
Bump Knob bolt in the correct direction
(clockwise for BT2200LDC and
BC2200E).
1. Insert each end of the line through the
eyelet on the outer spool. Then pull the end
firmly to release the line from the holding
slot.
B : INSTALLING A PREWOUND REEL
1. Follow the instructions in DISASSEM-
BLING THE HEAD.
2.Follow the instructions in INSTALLING THE
REEL.
II. Bump head for BC2200LDC
1
2
3
4
6
5
7
3.8m
(12.5')
7.6m
(25')
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
8
11
14
THIS
SIDE UP
WIND
LINE
1
2
9
THIS
SIDE UP
10
12
15
13
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
■ AIR FILTER
■ SPARK PLUG
The air filter, if clogged, will reduce the engine
performance. Every 30 days, check and clean
the filter element in warm, soapy water as
required. Dry completely before installing. If
the element is broken or shrunk, replace with
a new one.
Starting failure and mis-firing are often caused
by a fouled spark plug. Periodically clean the
spark plug and check that the spark gap is
within the correct range.
For a replacement plug, use Champion
RCJ6Y or the equivalent.
■ FUEL FILTER
■ STORAGE
When the engine runs short of fuel supply,
check the fuel filter for blockage.
Old fuel left in the carburetor may cause
starting failure. Before storing the unit, empty
the fuel tank and start the engine and run it on
until it stops by itself.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECFICATIONS
■ BT2200LDC
Overall size (LxWxH) ···························································································62.2x9.7x17.9 (in)
Dry weight ·························································································································10.1 (lbs)
Engine Type ························································································Air-cooled 2-stroke gasoline
Model ············································································································Zenoah G22L
Displacement ·······································································································22.5 (cc)
Max. output ························································································0.9 (HP) at 7000 rpm
Idling speed ·········································································································2800 rpm
Operating speed (with standard head) ·································································8300 rpm
Fuel·························································································Mixture (Gasoline 32 : Oil 1)
Fuel tank capacity···············································································································20 (fl.oz)
Transmission·Centrifugal clutch,Flex.driveshaft Reduction ratio ·································No reduction
Cutting head rotating direction ·······························································Clockwise (Operator view)
■ BC2200E
Overall size (LxWxH) ···························································································67.3x9.7x13.8 (in)
Dry weight ·························································································································10.6 (lbs)
Engine Type ························································································Air-cooled 2-stroke gasoline
Model·············································································································Zenoah G22L
Displacement ········································································································22.5 (cc)
Max. output ························································································0.9 (HP) at 7000 rpm
Idling speed ·········································································································2800 rpm
Operating speed (with standard head) ·································································7600 rpm
Fuel·························································································Mixture (Gasoline 32 : Oil 1)
Fuel tank capacity···············································································································20 (fl.oz)
Transmission·Centrifugal clutch,Flex.driveshaft Reduction ratio ···············································1.00
Cutting head rotating direction································································Clockwise (Operator view)
■ BC2200LDC
Overall size (LxWxH) ·························································································68.5x10.2x13.2 (in)
Dry weight··························································································································11.8 (lbs)
Engine Type ························································································Air-cooled 2-stroke gasoline
Model·············································································································Zenoah G22L
Displacement ········································································································22.5 (cc)
Max. output ························································································0.9 (HP) at 7000 rpm
Idling speed ·········································································································2800 rpm
Operating speed (with standard head) ·································································7000 rpm
Fuel·························································································Mixture (Gasoline 32 : Oil 1)
Fuel tank capacity···············································································································20 (fl.oz)
Transmission·Centrifugal clutch,Flex.driveshaft Reduction ratio ···············································1.23
Cutting head rotating direction···················································Counter clockwise (Operator view)
■ HE2200LDC
Overall size (LxWxH) ·························································································63.6x16.7x14.2 (in)
Dry weight ·························································································································12.6 (lbs)
Engine Type ························································································Air-cooled 2-stroke gasoline
Model·············································································································Zenoah G22L
Displacement ········································································································22.5 (cc)
Max. output ························································································0.9 (HP) at 7000 rpm
Idling speed ·········································································································2800 rpm
Operating speed (with standard blade)·····················································7000~11000 rpm
Fuel·························································································Mixture (Gasoline 32 : Oil 1)
Fuel tank capacity···············································································································20 (fl.oz)
Transmission·Centrifugal clutch,Flex.driveshaft Reduction ratio ···············································1.23
Cutting head rotating direction···················································Counter clockwise (Operator view)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
Fig.1 TRIMMER UNIT FOR BT2200LDC
Fig.1 TRIMMER UNIT FOR BT2200LDC
Key#
Description
Part Number Q'ty
Key#
Description
Part Number Q'ty
—————
—————
1
2
3
4
5
6
7
8
9
Curved shaft ass'y
Flex.drive shaft
1
1
1
1
1
5
1
1
1
1
4
1
1
1
1
1
17 Guard mount screw
18 Guard ass'y
19 Blade ass'y
20 Anti-rotation screw
21 Spool shaft
153318
683445
682061
145569
153313
153619
145566
610660
610317
153600
1
1
1
1
1
1
2
1
1
1
1
1
1
Throttle housing ass'y 181125
Throttle lever
Screw
180975
145569
Screw
147544
22 Outer spool ass'y
23 Eyelet
Spring
610314
Handle ass'y
Handle
6462-14100
6462-14310
6462-14320
0263-90535
147823
24 Retainer (10 pack)
25 Spring
10 Clamp
26 Inner reel
11 Screw
27 Bump head knob ass'y 153066
12 Cutting head ass'y
13 Lower clamp ass'y
14 Retaining ring
15 Washer
28 Throttle cable comp.
29 Decal
6502-82100
—————
153597
145570
145567
16 Bushing ass'y
153312
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig.2 TRIMMER UNIT FOR BC2200E
Fig.2 TRIMMER UNIT FOR BC2200E
Key#
Description
Part Number Q'ty
Key#
Description
Part Number Q'ty
—————
—————
1
2
3
4
5
6
7
8
9
Straight shaft ass'y
Flex drive shaft
1
1
1
1
1
1
5
1
1
1
4
1
1
16 Clamp assembly
153597
145569
1
1
1
17 Screw, Anti-rotation
Throttle housing ass'y 181125
18 Spool, Outer w/eyelet 153619
(include item 20)
Throttle lever
Spring
180975
19 Eyelet
145566
1
1
1
1
1
1
1
610314
20 Retainer
610660
Screw
145569
21 Spring
610317
Screw
147544
22 Reel, inner
23 Bump head knob assembly
24 Throttle cable comp
25 Decal
153600
Handle ass'y
Handle
6462-14100
6462-14310
6462-14320
0263-90535
180549
153066
6502-82100
—————
10 Clamp
11 Screw
12 Gear box ass'y
13 Guard, Cutting head
(include item 14)
180548
14 Blade assembly
180553
1
1
15 Heardware, guard mounting 180547
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig.3 TRIMMER UNIT FOR BC2200LDC
Fig.3 TRIMMER UNIT FOR BC2200LDC
Key#
Description
Part Number Q'ty
Key#
Description
Part Number Q'ty
—————
—————
1
2
3
4
5
6
7
8
9
Straight shaft ass'y
Flex.drive shaft
Gear box ass'y
Screw
1
1
1
1
18 Housing
19 Eyelet
UBTR-06
UBT-9
1
2
1
1
1
1
1
1
1
1
2
2
1
2
2
1
1
147488
20 NUT
UBTR-F10
UBT-4
—————
21 Spring
22 Spool
Screw set
147677
147489
1
1
1
1
1
1
5
1
1
1
1
4
1
UBT-3
Blade driver
23 Button
24 Cover
UBT-2
Lower retaining washer 147490
Throttle housing ass'y 181125
UBT-1
25 Guard ass'y
26 Guard Comp.
27 Blade
6778-24000
6778-24100
6778-24140
0263-30512
3320-15310
3541-24121
3540-24130
0290-20615
6502-82100
—————
Throttle lever
180975
10 Screw
145569
11 Screw
147544
28 Screw
12 Spring
610314
29 Nut
13 Handle ass'y
14 Handle
6462-14100
6462-14310
6462-14320
0263-90535
UBT-200
30 Clamp
31 Bolt
15 Clamp
32 Washer
33 Throttle cable comp.
34 Decal
16 Screw
17 Cutting head ass'y
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig.4 STICK EDGER UNIT FOR HE2200LDC
Fig.4 STICK EDGER UNIT FOR HE2200LDC
Key#
Description
Part Number Q'ty
Key#
Description
Part Number Q'ty
—————
—————
1
2
3
4
5
6
7
8
9
Curved shaft ass'y
Flex drive shaft
1
1
1
1
1
1
5
1
1
17 Retaining washer
18 Retaining nut
19 Guard Ass'y
20 Plate, rubber
21 Plate
613222
1
1
1
1
1
2
1
1
1
1
1
1
1
613221
6779-24100
Throttle housing ass'y 181125
Throttle lever
Spring
180975
610314
145569
147544
683295
—————
6779-24120
6779-24130
00225-30512
Screw
22 Bolt
Screw
23 Mounting Bolt assambly set 684070
6779-24150
Handle bracket ass'y
Srew
24 Guide bracket
25 Wheel
613216
10 Tube closure
11 Grip
612021
612381
180687
147488
—————
2
1
1
1
1
26 Wheel mounting bolt ass'y
27 Adjustment knob set
28 Throttle cable
29 Decal
684068
684069
12 J-Handle ass'y
13 Gear box ass'y
14 Screw
6502-82100
—————
15 Driver, blade
16 Blade
613217
180064
1
1
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig.5 ENGINE GROUP FOR BT2200LDC. BC2200E. BC2200LDC. HE2200LDC
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig.5 ENGINE GROUP FOR BT2200LDC. BC2200E. BC2200LDC.HE2200LDC
Key#
Description
Cylinder
Gasket, base
Bolt
Part Number Q'ty
Key#
Description
Ring
Swivel
Valve ass'y
O-Ring
Jet
Diaphragm
Gasket, pump
Diaphragm, pump
Body, pump
Screen
Gasket, diaphragm
Body, purge
Pump, priming
Cover, pump
Screw
Part Number Q'ty
1
2
3
4
5
6
7
8
5850-12110
5500-12211
1850-12130
5850-13160
5850-13120
5850-13130
5850-13210
5850-15100
1
1
2
1
1
1
2
1
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
1751-81130
1881-81140
—————
1751-81240
5516-81250
3310-81260
1065-81410
1065-81420
1850-81450
3306-81380
1850-81470
1850-81490
1751-81510
1850-81520
1850-81530
5850-82310
5850-83110
5850-82100
—————
—————
—————
—————
5850-82170
5850-82210
5850-31100
0225-30635
0280-10605
5850-13210
5850-32110
5850-15230
5850-32170
5602-73110
5850-72210
5850-85110
5850-85200
5850-85320
5850-85330
5850-85400
5850-85510
5850-91120
5850-91000
3239-91310
3582-91330
3540-91110
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
1
1
2
1
1
1
1
1
1
1
1
4
1
1
2
1
1
1
1
1
1
1
3
1
1
1
1
1
Insulator
Gasket, insulator
Gasket, carburetor
Screw
Muffler ass'y
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Arrester
Screw
Gasket, muffler
Plate, muffler
Screw
Crankcase comp
Gasket, case
Bearing
Oil seal
Oil seal
Snap ring
Screw
Piston
Ring
5850-15140
5850-15130
5850-15211
5850-15220
5850-15230
5850-21100
5500-21140
06030-06001
2169-21210
1850-21220
04065-02812
01252-30530
5600-41111
1100-41210
1101-41310
1260-41320
5850-42000
1000-43240
5850-51100
5850-51210
5850-51220
5850-71111
5850-71200
1260-71261
5850-72160
5850-75100
5850-75110
5850-75120
5850-75130
5850-75140
1400-86280
5850-75150
5850-75160
5850-75200
5850-75220
5850-75230
0308-00040
5850-15230
5850-83221
5850-81000
5850-81110
1
2
1
1
1
1
1
2
1
1
1
4
1
2
1
2
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
2
Screw
O-Ring
Body ass'y
Sleeve
Plate, choke
Lever, choke
Screw
Element
Cover
Housing comp
Bolt
Nut
Pin
Snap Ring
Crankshaft comp
Key
Shoe-c
Washer
Spacer
Rotor
Coil ass'y
Spacer
Screw
Cover, engine
Screw
Screw
Spark plug
Switch comp
Tank
Cap ass'y
Pipe, Return
Grommet
Filter ass'y
Screw
Label, recoil
Tool set
Socket
Bar
Bar
Screw
Recoil ass'y
Case comp.
Reel
Spring, spiral
Screw
Washer
Rope
Knob
Pulley ass'y
Ratchet
Spring
Ring
Screw
Bracket
Carburetor ass'y
Screw
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS
THE CALIFORNIA AIR RESOURCES BOARD AND KOMATSU ZENOAH Co. ARE PLEASED TO
EXPLAIN THE EMISSION CONTROL SYSTEM WARRANTY ON YOUR 1995 AND LATER LAWN AND
GARDEN EQUIPMENT ENGINE. IN CALIFORNIA, NEW UTILITY AND LAWN AND GARDEN
EQUIPMENT ENGINES MUST BE DESIGNED, BUILT AND EQUIPPED TO MEET THE STATE'S
STRINGENT ANTI-SMOG STANDARDS.
KOMATSU ZENOAH Co, MUST WARRANT THE EMISSION CONTROL SYSTEM ON YOUR LAWN AND
GARDEN EQUIPMENT ENGINE FOR THE PERIODS OF TIME LISTED BELOW PROVIDED THERE HAS
BEEN NO ABUSE, NEGLECT OR IMPROPER MAINTENANCE OF YOUR LAWN AND GARDEN
EQUIPMENT ENGINE.
YOUR EMISSION CONTROL SYSTEM. MAY INCLUDE PARTS SUCH AS THE CARBURETOR, THE
IGNITION SYSTEM, AND CATALYTIC CONVERTER. ALSO INCLUDED MAY BE THE HOSES, BELTS,
CONNECTORS AND OTHER EMISSION-RELATED ASSEMBLIES.
WHERE A WARRANTABLE CONDITION EXISTS, KOMATSU ZENOAH Co. WILL REPAIR YOUR LAWN
AND GARDEN EQUIPMENT ENGINE AT NO COST TO YOU INCLUDING DIAGNOSIS, PARTS AND
LABOR.
MANUFACTURER'S WARRANTY COVERAGE:
THE 1995 AND LATER UTILITY AND LAWN AND GARDEN EQUIPMENT ENGINES ARE
WARRANTED FOR TWO YEARS. IF ANY EMISSION-RELATED PART ON YOUR ENGINE IS
DEFECTIVE, THE PART WILL BE REPAIRED OR REPLACED BY KOMATSU ZENOAH Co.
OWNER'S WARRANTY RESPONSIBILITIES:
—AS THE LAWN AND GARDEN EQUIPMENT ENGINE OWNER, YOU ARE RESPONSIBLE FOR
THE PERFORMANCE OF THE REQUIRED MAINTENANCE LISTED IN YOUR OWNER'S
MANUAL. KOMATSU ZENOAH Co. RECOMMENDS THAT YOU RETAIN ALL RECEIPTS
COVERING MAINTENANCE ON YOUR LAWN AND GARDEN ENGINE, BUT KOMATSU
ZENOAH Co. CAN NOT DENY WARRANTY SOLELY FOR THE LACK OF RECEIPTS OR FOR
YOUR FAILURE TO ENSURE THE PERFORMANCE OF ALL SCHEDULED MAINTENANCE.
—AS THE LAWN AND GARDEN EQUIPMENT ENGINE OWNER, YOU SHOULD BE AWARE,
HOWEVER, THAT KOMATSU ZENOAH Co. MAY DENY YOU WARRANTY COVERAGE IF
YOUR LAWN AND GARDEN EQUIPMENT ENGINE OR A PART HAS FAILED DUE TO ABUSE,
NEGLECT, IMPROPER MAINTENANCE OR UNAPPROVED MODIFICATION.
—YOU ARE RESPONSIBLE FOR PRESENTING YOUR LAWN AND GARDEN EQUIPMENT
ENGINE TO A KOMATSU ZENOAH Co. DISTRIBUTION CENTER AS SOON AS A PROBLEM
EXISTS. THE WARRANTY REPAIRS SHOULD BE COMPLETED IN A REASONABLE AMOUNT
OF TIME, NOT TO EXCEED 30 DAYS.
IF YOU HAVE ANY QUESTIONS REGARDING YOU WARRANTY RIGHTS AND RESPONSIBILITIES,
YOU SHOULD CONTACT KOMATSU ZENOAH AMERICA INC. AT (770)-381-5147.
Download from Www.Somanuals.com. All Manuals Search And Download.
RedMax TRIMMER/STICK EDGER
MODELS BT2200LDC/BC2200E/BC2200LDC/HE2200LDC
2(1) -YEAR LIMITED WARRANTY
EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE MODEL
BT2200LDC OR BC2200E / BC2200LDC OR HE2200LDC UNIT, KOMATSU ZENOAH AMERICA INC. (THE COMPANY),
THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH
SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR
WORKMANSHIP. EMISSION-RELATED PARTS ARE:
THE CARBURETOR ASSY, COIL ASSY, ROTOR AND THE SPARK PLUG,
AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, GASKETS
ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF HOME USE [ ONE (1) YEAR FOR ANY OTHER
USE ] FROM THE DATE OF ORIGINAL ANY DELIVERY OF THE MODEL BT2200LDC OR BC2200LDC OR HE2200LDC
UNIT AND FOR ONE (1) YEAR OF HOME USE [90 DAYS FOR ANY OTHER USE] FROM THE DATE OF ORIGINAL ANY
DELIVERY OF THE MODEL BC2200E UNIT,THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR
REPLACE. FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE
IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.
THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.
THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION
THAT A WARRANTED PART ID DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.
THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS
DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.
ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR
WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS
NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS
SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF
TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THAT PART.
ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON-
WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE
COMPANY.
THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A
WARRANTED PARTS STILL UNDER WARRANTY.
THIS WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF
INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS,
ACCIDENT MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION. USE OF ANY PARTS OR ACCESSORIES
OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.
THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN
THEIR APPEARANCE.
THERE ARE NO OTHER EXPRESS WARRANTIES.
IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE LIMITED TO
–TWO (2) YEARS OF HOME USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE ORIGINAL DELIVERY DATE FOR
THE MODEL BT2200LDC OR BC2200LDC OR HE2200LDC. AND
–ONE (1) YEAR OF HOME USE [90 DAYS FOR ANY OTHER USE] FROM THE ORIGINAL DELIVERY DATE FOR THE
MODEL BC2200E.
LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES
ARE EXCLUDED.
SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL KOMATSU
ZENOAH AMERICA INC. AT (770)-381-5147.
IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE. PLEASE FILL
OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO
KEEP A COPY FOR YOUR RECORDS.
KOMATSU ZENOAH AMERICA INC.
1505 Pavilion Place Suite A
Norcross, Georgia 30093
Download from Www.Somanuals.com. All Manuals Search And Download.
KOMATSU ZENOAH AMERICA INC.
1505 Pavilion Place Suite A
Norcross, Georgia 30093
© Printed in the USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|