15-1924.fm Page 1 Monday, July 19, 1999 12:50 PM
Cat. No. 15-1924
OWNER’S MANUAL
7-in-1 Remote Control
with Lighted Keypad
Plug ’n Power Compatible
Please read before using this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 3 Monday, July 19, 1999 12:50 PM
Convenient Keypad Design — each key is posi-
tioned for easy operation.
Toll Free Support — you can get expert help for
your 7-in-1 Remote Control by calling 1-800-989-
4706.
Note: You need four AAA batteries (not supplied)
to power your 7-in-1 Remote Control.
Need help? Call 1-800-989-4706
3
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 4 Monday, July 19, 1999 12:50 PM
CONTENTS
How the 7-in-1 Works ..................................... 5
Preparation ..................................................... 7
Installing Batteries ...................................... 7
Lighting the Keys ........................................ 8
Device Types .............................................. 8
Setting Up Your 7-in-1 ................................ 9
Using Two or More Similar Devices .. 10
Operation ...................................................... 11
Punch-Through ......................................... 11
Using the 7-in-1’s Timer ........................... 12
Plug ’n Power Functions ........................... 12
Entering a Plug ’n Power
House Code ...................................... 13
Controlling Lights and Appliances
Using an IR Command Console ....... 13
Controlling Lights and Appliances
Using a Control Center Module ......... 15
Setting a Plug ’n Power Timer .......... 16
Teaching Commands to the 7-in-1 ........... 17
Teaching a Command ....................... 18
Clearing All Commands .................... 19
If You Have Problems .................................. 20
Manual Code Search ................................ 20
Determining the 3-Digit Code ............ 21
Troubleshooting ........................................ 22
Manufacturers’ Codes ................................. 23
Audio Amplifiers ....................................... 23
Audio Receivers ....................................... 23
Audio Systems ......................................... 23
Cable Converters ..................................... 23
Cassette Player ........................................ 25
CD Players ............................................... 25
Direct-to-Home Satellite Receivers .......... 28
Home Automation ..................................... 28
Laser Disc Players ................................... 28
Satellite Receivers .................................... 28
Televisions ................................................ 29
TV/VCR Combinations ............................. 36
VCRs ........................................................ 36
Care and Maintenance ................................. 43
Specifications ............................................... 44
Need help? Call 1-800-989-4706
4
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 5 Monday, July 19, 1999 12:50 PM
HOW THE 7-IN-1 WORKS
Your RadioShack 7-in-1 Remote Control was de-
signed to control the most commonly used func-
tions on your TV, VCR, cable converter, CD
player, satellite receiver, audio equipment, and
Plug ’n Power devices.
When you set up the 7-in-1 Remote Control, its
command keys work like the keys on your original
remote controls. For example, the 7-in-1 Remote
Control’s POWER (All Lts On) key works like a key
on your original remote control which might be la-
beled POWER ON/OFF.
Key
Function
SET UP
Used in setting up your
devices.
Lights your keypad for use in
dark or dimly lit rooms.
POWER (All Lts
On), digit keys,
Operate the same as the cor-
responding keys on your origi-
nal remote control.
CHANNEL + (On),
CHANNEL – (Off),
VOLUME + (Brt),
VOLUME – (Dim),
LAST, MUTE (All
Off), DISP
LEARN
Used when you teach the 7-
in-1 infrared codes from your
original remote controls.
TV, VCR, CBL, CD, Used when you set up the 7-
AUX1, AUX2, SAT,
Plug ’n Power
in-1 to replace your original
remote controls. Also used
during normal operation to tell
the 7-in-1 which device you
want to control.
SHIFT
Used to store and access
additional learned device
functions, or when you must
enter a key shift to access a
function.
SELECT
Used for menu selections on
some direct-to-home satellite
systems.
Need help? Call 1-800-989-4706
5
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 6 Monday, July 19, 1999 12:50 PM
Key
Function
GUIDE
Displays the main menu on
direct-to-home satellite sys-
tems.
REC,
PAUSE,
REW,
STOP
Control VCR functions and
are used to select options and
navigate in your Surround
Sound system, satellite sys-
tem, or other similar device.
PLAY,
FF,
TIMER
Used to set the timer to auto-
matically switch off the TV
after 60 minutes. Or, to turn
on or off a lamp/appliance
module or turn off all modules
after 1 to 99 minutes in the
Plug ’n Power mode.
L1, L2
LEARN
when you
Used with
teach the 7-in-1 infrared com-
mands from your original
remote controls. You can also
L1
L2
to add one or
use
and
two extra original remote con-
trol functions.
.
A B
Switches between TV and AV
in the TV mode, TV and VCR
in the VCR mode, A and B in
the CBL mode, TV and DSS
in the DSS mode, and Deck A
and Deck B in the audio
mode.
ENT
Lets you enter information
into the 7-in-1’s memory.
Notes:
• Whenever you use REC on the remote con-
trol, you must press it twice. This safety fea-
ture helps you avoid accidentally recording
over tapes.
• The 7-in-1 Remote Control might not be able
to duplicate some of your original remote
control’s seldom-used functions.
Need help? Call 1-800-989-4706
6
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 7 Monday, July 19, 1999 12:50 PM
PREPARATION
INSTALLING BATTERIES
You need four AAA batteries to power your re-
mote control. We recommend alkaline batteries,
such as RadioShack Cat. No. 23-558.
Cautions:
• Use only fresh batteries of the required size
and recommended type.
• Do not mix old and new batteries, different
types of batteries (standard, alkaline, or
rechargeable), or rechargeable batteries of
different capacities.
• Do not press any of the 7-in-1’s keys while
installing batteries.
1. Press the battery compart-
ment cover’s tab and lift off
the cover.
2. Install four AAA alkaline bat-
teries as indicated by the
polarity symbols (+ and –)
marked inside the compart-
ment.
3. Replace the cover.
Do not place objects on top of the remote
Note:
control after you have installed the batteries. This
can press keys for an extended period of time and
reduce battery life.
When the 7-in-1 Remote Control’s range de-
creases or it stops operating properly, replace the
batteries.
Although the 7-in-1 has a built-in memory
Note:
backup, we recommend you have fresh batteries
ready to install as soon as you remove the old
ones.
Need help? Call 1-800-989-4706
7
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 8 Monday, July 19, 1999 12:50 PM
LIGHTING THE KEYS
Press
to light the keys on the remote for about
5 seconds. If you press a key when the keys are
lit, the keys stay lit for about 5 more seconds.
To turn off the light before it automatically turns
off, press
again.
DEVICE TYPES
You can use the 7-in-1 Remote Control’s device
keys to control the following general types of de-
vices:
TV
— TVs
VCR
— VCRs, TV/VCR combinations, laser disc
players, cassette decks and digital audio tape
decks
CBL
— Cable converters, satellite receivers and
video accessories
CD
— CD players, amplifiers, tuners, receivers,
and miscellaneous audio products
AUX1/AUX2
— TVs, VCRs, laser disc players, CD
players, cassette decks, digital audio tape decks,
cable converters, satellite receivers, Plug ’n Pow-
er devices, video accessories, amplifiers, tuners,
receivers, and miscellaneous audio products
SAT
— standard and direct-to-home satellite re-
ceivers
Plug ’n Power — Plug ’n Power or X-10 home
automation devices
AUX1
AUX2
or an
Note: You can also program
or
unused device key to control additional devices
(see “Using Two or More Similar Devices” on
Page 10).
Need help? Call 1-800-989-4706
8
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 9 Monday, July 19, 1999 12:50 PM
SETTING UP YOUR 7-IN-1
1. Refer to “Manufacturers’ Codes” on Page 23
and write down the codes for your original
remote controls.
Notes:
• Some manufacturers have several possi-
ble codes listed. Try each until you find the
right one. See “If You Have Problems” on
Page 20 if you cannot find the correct
code.
• If you want to set up your 7-in-1 to control
a combination TV/VCR (such as Cat. No.
16-421 or 16-422), you must program the
TV code for the TV functions
code for the VCR functions.
the VCR
and
SET UP
2. Hold down
until the red light above
turns on.
Note: To exit the set up routine at any time,
SET UP
press
again. The red light flashes
several times.
3. Press the device key for the type of remote
TV VCR CBL CD
, Plug ’n
you are replacing (
SAT
,
,
,
Power, or
).
Note: If you do not press a device key within
about 15 seconds, the red light flashes for
about 3 seconds then turns off. Start again
from Step 2.
4. Enter the 3-digit code.
For example, to replace a TV’s remote con-
trol (manufacturer’s code 185), press:
SET UP TV 1– 8
5
–
–
–
When the red light turns off, the 7-in-1 has
accepted the code.
Note: If the code you entered is invalid, the
red light flashes for about 3 seconds then
turns off.
Need help? Call 1-800-989-4706
9
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 10 Monday, July 19, 1999 12:50 PM
5. Point the 7-in-1 Remote Control at your
device and press POWER (All Lts On) (or
CHANNEL + (On) for some cable boxes). Your
device should turn off (or on, if it was off).
If the remote does not operate your device,
try the other codes listed in “Manufacturers’
Codes” on Page 23 for your brand of TV,
VCR, cable converter, or other device.
6. Repeat Steps 2–5 for additional devices.
Using Two or More Similar Devices
If you have two or more similar devices (two
VCRs for example) and you have already pro-
grammed the 7-in-1 to control one of the devices
using that device key, you can program the AUX1
and AUX2 device keys or an unused device key to
control the additional device.
Follow these steps to program AUX1 or AUX2.
1. Repeat Step 1 and 2 under “Setting Up Your
7-in-1” on Page 9.
2. Press AUX1 or AUX2.
3. If you are replacing a CD’s remote control,
skip to Step 4. Otherwise, press the device
key for the type of remote you are replacing
(VCR, CBL, TV, CD,
, or SAT.
Plug ’n Power
If you do not press a device key within
Note:
about 15 seconds, the red light flashes for
about 3 seconds then turns off. Start again
from Step 1.
4. Repeat Steps 4–6 under “Setting Up Your 7-
in-1” on Page 9.
To program an unused device key to control an
additional device, choose an unused device key
that controls a similar type of device (see “Device
Types” on Page 8), then program it using the
steps in “Setting Up Your 7-in-1” on Page 9.
Need help? Call 1-800-989-4706
10
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 11 Monday, July 19, 1999 12:50 PM
OPERATION
1. Press the device key for the device you want
to control, then point the 7-in-1 at the device
and press POWER (All Lts On) (or CHANNEL
+ (On) for some cable converters) to turn the
device on.
2. Repeat Step 1 for all other devices you want
to operate.
3. Point the 7-in-1 toward the device you want
to control, then press the appropriate device
key and the desired command keys.
The command keys on the 7-in-1 work
Note:
the same as the keys on the original remote
control; however, the labeling might differ
slightly.
4. To turn off the last device you selected, press
POWER (All Lts On). To turn off other devices,
press the device key for the device you want
to turn off, then press POWER (All Lts On).
PUNCH-THROUGH
The punch-through feature lets you alternately
control two different devices without pressing the
device keys for each one. Here’s how it works.
Not all of the 7-in-1 Remote Control’s keys are
used by every device. For example, a TV is often
the only device that uses the volume keys. After
you press TV, then press VCR, you can still use
the volume control to control the TV.
Punch-through does not work when you are using
the 7-in-1 to control CD players and Plug ’n Power
devices.
Notes:
• The punch-through feature might not work if
the last two devices you selected have the
same (or similar) features. For example,
most TVs and some cable converters have
channel select keys on their remote controls.
Need help? Call 1-800-989-4706
11
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 12 Monday, July 19, 1999 12:50 PM
In this case, you must press the desired
device key before you use the remote con-
trol’s CHANNEL + (On) or CHANNEL – (Off)
keys.
• If you selected AUX1 or AUX2, you can
punch-through TV, VCR, or CBL if you have
not programmed AUX1 or AUX2 as a TV,
VCR, or CBL device.
USING THE 7-IN-1’S TIMER
This feature lets you set your 7-in-1 to turn off
your TV after 60 minutes.
1. Press TIMER on the 7-in-1.
2. Within 15 seconds, press ENT on the 7-in-1.
The red light blinks once.
If you do not press ENT within 15 sec-
Note:
onds, the red light does not blink. Start again
from Step 1.
3. Leave the 7-in-1 pointing at the TV’s infrared
sensor. Make sure there is nothing blocking
the line of sight between the 7-in-1 and the
TV.
To cancel the timer, hold down TIMER until the red
light blinks once, or press TV then press POWER
(All Lts On).
’
PLUG N POWER FUNCTIONS
The Plug ’n Power feature allows you to control
lights and appliances with an optional IR com-
mand console (RadioShack Unlimited No.
10037703) or Plug ’n Power Wireless Remote
Control System (Cat. No. 61-2676). You also
need Plug ’n Power light modules and appliance
modules (available through your local Ra-
dioShack store) to use this feature.
Need help? Call 1-800-989-4706
12
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 13 Monday, July 19, 1999 12:50 PM
Entering a Plug n Power House Code
’
Your IR Command Console or Plug ’n Power
Wireless Remote Control System uses a master
code called a
(see your IR Command
house code
Console’s or Plug ‘n Power Wireless Remote
Control System’s Owner’s Manual for more infor-
mation).
1. Press Plug ’n Power on the 7-in-1 Remote
Control.
2. Hold down SET UP on the 7-in-1 until the red
light above
turns on.
3. Use the 7-in-1’s number keys to enter the
numbers equivalent to the house code’s let-
ters (1 for A, 2 for B, 3 for C, and so on).
For example, if the house code is C, press 3.
4. Press ENT on the 7-in-1.
When the red light turns off, the 7-in-1 has
accepted the code.
Note: If the code you entered is invalid, the
red light flashes for about 3 seconds then
turns off. Start again from Step 1.
Controlling Lights and Appliances Using
an IR Command Console
Follow these steps to control Plug ’n Power mod-
ules with your 7-in-1 using an IR command con-
sole.
1. Position the IR command console within the
7-in-1’s line of sight.
2. Plug the IR command console’s power cord
into any standard AC outlet.
3. Set the house code dial on top of the IR com-
mand console to the same letter as your
Plug ’n Power modules.
4. Set the selector switch on the IR command
console for the group of modules you want to
control (1–4 or 5–8).
Need help? Call 1-800-989-4706
13
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 14 Monday, July 19, 1999 12:50 PM
5. Hold down SET UP on the 7-in-1 until the red
light above
turns on.
6. Press
, then enter 0 – 1 – 4 on
Plug ’n Power
the 7-in-1. The red light turns off.
7. Press on the 7-in-1.
Plug ’n Power
8. To turn on all light and appliance modules set
to the same house code as the IR command
console, press POWER (All Lts On) on the 7-
in-1, or ALL LIGHTS ON on the IR command
console.
To turn off all light and appliance modules set
to the same house code as the IR command
console, press MUTE (All Off) on the 7-in-1,
or ALL UNITS OFF on the IR command con-
sole.
9. To turn specific lights and appliances on or
off using the 7-in-1 Remote Control, press
the digit key (1, 2, 3, 4, 5, 6, 7, or 8) for the
module you want to control. Then press On
or Off (CHANNEL + (On) or CHANNEL – (Off)).
To control specific lights and appliances
directly from the IR command console, set
the console’s selector to the number of the
module you want to control (1–4 or 5–8),
press the button on the console that corre-
sponds to the number of the module you
want to control (1/5, 2/6, 3/7, 4/8), then press
ON on the IR command console.
10. To brighten or dim lights connected to lamp
and appliance modules, press the digit key
for the module you want to control. Then
hold down VOLUME + (Brt) or VOLUME –
(Dim) on the 7-in-1. Release the key when
the desired level of brightness is reached.
You must select the individual light to
Note:
brighten or dim even if you used POWER (All
Lts On) on the 7-in-1 to turn on all the lights
at the same time.
Need help? Call 1-800-989-4706
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 15 Monday, July 19, 1999 12:50 PM
Controlling Lights and Appliances Using
a Control Center Module
Follow these steps to control Plug ’n Power mod-
ules with your 7-in-1 using your Plug ’n Power
Wireless Remote Control System’s control center
module.
1. Plug the control center module’s power cord
into any standard AC outlet.
2. Set the house code dial on top of the control
center module to the same letter as your
Plug ’n Power modules.
3. Set the unit selector switch on the control
center module for the group of modules you
want to control (1–8 or 9–16).
Note: If the 7-in-1’s Plug ’n Power code is
already set to 0 – 1 – 3 (the default), skip
Steps 4 and 5.
4. Hold down SET UP on the 7-in-1 until the red
light above
turns on.
5. Press Plug ’n Power then enter 0 – 1 – 3 on
the 7-in-1. The red light turns off.
6. On the 7-in-1, enter the house code that
matches your control center module’s house
code (see Step 3 under “Entering a Plug ’n
Power House Code” on Page 13).
7. To turn on all light and appliance modules set
to the same house code as the control center
module, press POWER (All Lts On) on the 7-
in-1.
To turn off all light and appliance modules set
to the same house code as the control center
module, press MUTE (All Off) on the 7-in-1.
8. To turn specific lights and appliances on or
off, press the digit key (1–16) for the module
you want to control. Then press On or Off
(CHANNEL + (On) or CHANNEL – (Off)).
Need help? Call 1-800-989-4706
15
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 16 Monday, July 19, 1999 12:50 PM
9. To brighten or dim lights connected to lamp
and appliance modules, press the digit key
for the module you want to control. Then
hold down VOLUME + (Brt) or VOLUME –
(Dim) on the 7-in-1. Release the key when
the desired level of brightness is reached.
You must select the individual light to
Note:
brighten or dim even if you used POWER (All
Lts On) on the 7-in-1 to turn on all the lights
at the same time.
Setting a Plug n Power Timer
’
You can set the 7-in-1 Remote Control to turn on
or off a lamp/appliance module you select or turn
off all modules after a period of 1 to 99 minutes.
This works with an optional IR command console
or Plug ’n Power Wireless Remote Control Sys-
tem.
When you use the 7-in-1 to control all mod-
Note:
ules at one time, the only command that works is
All Off.
1. Press
on the 7-in-1.
Plug ’n Power
2. Hold down TIMER on the 7-in-1 until the red
light above stays on.
Skip Step 3 if you are turning all mod-
Note:
ules off using the All Off command.
3. To turn on or off a specific module using the
7-in-1 Remote Control, press the digit keys
to enter the module’s device code. The red
light blinks once.
4. Press On (CHANNEL + (On) (to set a module
to turn on), Off (CHANNEL – (Off) (to set a
module to turn off), or MUTE (All Off) (to set
all modules to turn off.
When the red light blinks once, the 7-in-1
has accepted the code.
Need help? Call 1-800-989-4706
16
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 17 Monday, July 19, 1999 12:50 PM
Note: If the code you entered is invalid, the
red light flashes for about 3 seconds.
5. Use the 7-in-1’s number keys to enter the
time you want to set. For example, if you
want to enter 15 minutes, press 1–5.
When the red light blinks once, the 7-in-1
has accepted the code.
Note: If the time you entered is invalid, the
red light flashes for about 3 seconds. Start
again from Step 1.
6. Press ENT on the 7-in-1. The red light turns
off.
To cancel the timer, press Plug ’n Power on the
7-in-1, then hold down TIMER until the red light
blinks.
TEACHING COMMANDS TO THE
7-IN-1
You can teach infrared commands from one or
more original remote controls to your 7-in-1 Re-
mote Control, storing each command in one of
the 7-in-1’s keys. This is handy if a prepro-
grammed manufacturers’ code you selected does
not control all of your device’s functions, or if none
of the manufacturers’ codes work for your device.
You can teach the functions of as many as 3 orig-
inal remote controls, with as many as 50 keys
each, to the 7-in-1.
Notes:
• Depending on how commands are stored in
your original remote control, you might not
be able to store all of the remote control’s
commands into your 7-in-1.
Need help? Call 1-800-989-4706
17
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 18 Monday, July 19, 1999 12:50 PM
• You can store a command into any of the 7-
in-1’s keys except SET UP, LEARN,
Plug ’n
, TV, VCR, CBL, CD, AUX1, AUX2, SAT,
Power
SHIFT, ENT, and TIMER.
• You can store a command in one of the 7-in-
1’s keys where you have to press SHIFT then
the key to activate the command. This lets
you store more commands.
Teaching a Command
Make sure there are fresh batteries in
Important:
both the 7-in-1 and the original remote control be-
fore following the steps in this section.
Program only one or two of your original re-
Hint:
mote control’s commands into the 7-in-1 at a time
using the steps in this section, then try those com-
mands before programming more commands.
Follow these steps to teach a command from an-
other remote control to one of your 7-in-1’s keys.
1. If this is the first time you are teaching a
command to your 7-in-1, follow the steps in
“Clearing All Commands” on Page 19.
2. Position the 7-in-1 and the original remote
control about 1 or 2 inches apart, so the 7-in-
1’s infrared eye is pointing at the original
remote control’s infrared eye. Make sure
there is nothing blocking the line of sight
between the two.
3. Hold down SET UP on the 7-in-1 until the red
light above
turns on.
4. Press the device key on the 7-in-1 for the
device you want to control. The red light
blinks.
5. Press LEARN on the 7-in-1.
6. Within 15 seconds, press the key on the 7-in-
1 that you want to program. For example, if
you want to program the PLAY command
Need help? Call 1-800-989-4706
18
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 19 Monday, July 19, 1999 12:50 PM
from a VCR’s original remote control, press
PLAY on the 7-in-1.
If the key you want to program is already
used for another command, press SHIFT
before pressing the key. For example, to
store the command SHIFT-PLAY, press
SHIFT then PLAY on the 7-in-1.
7. On the original remote control, hold down the
key that you want your 7-in-1 to learn until
the red light on the 7-in-1 blinks once.
If the command was not programmed
Note:
properly, the red light blinks for about 3 sec-
onds then turns off. If this happens, repeat
Steps 4–7.
8. Repeat Steps 1–7 to store more commands.
9. When you finish, press ENT on the 7-in-1 to
save all stored commands.
If you do not press a key within 15 seconds,
Note:
the red light blinks for about 3 seconds then turns
off. Begin again from Step 1.
Clearing All Commands
1. Hold down SET UP on the 7-in-1 until the red
light above
turns on.
2. Press the device key on the 7-in-1 for which
you want to clear all commands. The red
light blinks once.
3. Press LEARN on the 7-in-1 twice. The red
light flashes for a few seconds.
4. Press SET UP on the 7-in-1. After a few sec-
onds, the red light flashes then turns off.
Need help? Call 1-800-989-4706
19
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 20 Monday, July 19, 1999 12:50 PM
IF YOU HAVE PROBLEMS
MANUAL CODE SEARCH
If the 7-in-1 Remote Control does not operate
your remote-controlled devices when you first set
it up, you might have to manually find the correct
code for your devices. You can try all the codes
listed in “Manufacturers’ Codes” on Page 23 for
the brand of your device, or you can follow these
steps to search the 7-in-1’s entire library.
1. Manually turn on the device you want to set
up.
2. Hold down SET UP on the 7-in-1 until the red
light above
turns on.
3. Press the corresponding device key on your
7-in-1 Remote Control (TV, VCR, CBL, CD,
and so on). Or, to search all the codes avail-
able to AUX1 or AUX2 to control a device,
press AUX1 or AUX2 then the corresponding
device key. The red light blinks once.
4. Aim the 7-in-1 Remote Control at the device
you want to operate.
5. Repeatedly press On (CHANNEL + (On),
PLAY, or POWER (All Lts On) until the device
responds to the command.
6. When the device responds to the command,
press ENT within 5 seconds to save the
code.
Notes:
• If you accidentally overshoot the correct
code, repeatedly press LAST then On
(CHANNEL + (On), PLAY, or POWER (All Lts
On) on the 7-in-1 to move back through
the codes until the device responds to the
command.
• If you do not press ENT within 5 seconds,
the 7-in-1 does not save the code.
Need help? Call 1-800-989-4706
20
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 21 Monday, July 19, 1999 12:50 PM
• Because the 7-in-1’s library has so many
codes, this procedure can take several
minutes.
• If your device turns off during the search,
but does not operate after you lock in the
code, begin the search again, pausing
longer between key presses.
If necessary, repeat these steps for each device.
Determining the 3-Digit Code
After you set up your 7-in-1 Remote Control using
manual code search, you can find which 3-digit
code the 7-in-1 Remote Control is set to by follow-
ing these steps.
1. Hold down SET UP until the red light above
turns on.
2. Press the device key you want to get the
manufacturer’s code from. The red light
blinks once then stays on.
3. Press SET UP. The red light blinks once then
stays on.
4. Press 0 – 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 – 9, wait-
ing a few seconds after you press each num-
ber before you press the next one.
If the red light blinks after you press a num-
ber, that number is the first number of your 3-
digit manufacturer’s code.
5. Repeat Step 4 twice to find the second and
third numbers of your 3-digit manufacturer’s
code. After the red light blinks for the third
digit in the code, it turns off.
Need help? Call 1-800-989-4706
21
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 22 Monday, July 19, 1999 12:50 PM
TROUBLESHOOTING
If the 7-in-1 Remote Control stops working after
you have successfully tested the control for each
device, or if you are unable to get the remote con-
trol to work at all, check these things:
• Be sure you press the device key for the
device you want to control before you press
any other key.
• Confirm that your remote control devices are
working properly by using the original remote
control or the manual controls.
• Replace the batteries.
• If some of the keys do not function for your
device, you might be able to find a better
device code.
Need help? Call 1-800-989-4706
22
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 23 Monday, July 19, 1999 12:50 PM
MANUFACTURERS’ CODES
The following list tells you which 3-digit codes to
enter to set up the 7-in-1 Remote Control.
Notes:
• The 7-in-1 Remote Control might not have
every command of your original remote con-
trols.
• A key on the 7-in-1 Remote Control that has
the same name as a key on your original
remote control might have a slightly different
function.
RadioShack
Manufacturer
Code(s)
AUDIO AMPLIFIERS
106
Cat. No.
Optimus
31-3034
31-3035
31-3036
31-3037
31-3038
Sherwood
079
AUDIO RECEIVERS
JVC
143
107
Optimus
31-3034
31-3035
31-3036
31-3037
31-3038
Technics
Optimus
144
AUDIO SYSTEMS
020
13-1283
13-1284
13-1293
101
13-1277
13-1294
102
Venturer
ABC
098
CABLE CONVERTERS
014, 015, 016, 017,
018, 019, 020
Antronix
021, 022
Archer
021, 022, 023, 024
Cabletenna
Cableview
021
021
Need help? Call 1-800-989-4706
23
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 24 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
CABLE CONVERTERS (Continued)
Century
Citizen
024
024
Colour Voice
Comtronics
Contec
025, 026
027, 028
029
Eastern
030
Garrard
024
GC Electronics
Gemini
022
031, 032
016
General Instrument
Hamlin
033, 034, 035
016
Hitachi
Hytex
015
Jasco
024
Jerrold
014, 016, 017, 018,
020, 031, 037, 062,
063
Magnavox
Memorex
Movie Time
NSC
038
039
015, 040
015, 040
015, 029, 042
013, 061, 064
039
Oak
Panasonic
Paragon
Philips
024, 025, 026, 032,
038, 043, 044, 045
Pioneer
Pulsar
046, 047
039
RadioShack
RCA
058
15-1288
15-1283
013, 060
022
Realistic
Regal
035
Regency
Rembrandt
Runco
030
016
039
Samsung
027, 047
Need help? Call 1-800-989-4706
24
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 25 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
CABLE CONVERTERS (Continued)
Scientific Atlanta
019, 049, 050, 051,
066, 067
Signal
027, 031
016
Signature
St. Marx
Sprucer
027
013
Standard
052
Components
Starcom
Stargate
Starquest
Star Trak
Tandy
014, 020, 031
027, 031
031
069
053
Teleview
Texscan
Tocom
027
052
017, 054
039
Toshiba
Tusa
031
TV86
040
Unika
021, 022, 024
015
United Artists
United Cable
Universal
014
021, 022, 023, 024,
055
Videoway
Viewstar
057
028, 038, 040, 053,
056
Zenith
039
CASSETTE PLAYER
104, 105
Optimus
31-3034
31-3035
31-3036
31-3037
31-3038
CD PLAYERS
013
ADC
Adcom
Aiwa
Akai
014, 067
015, 016
068, 090
Need help? Call 1-800-989-4706
25
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 26 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
CD PLAYERS (Continued)
Audio Alchemy
Audio Technica
BSR
017
018
017
California Audio Labs 069
Capetronic
Carrera
Carver
022
017
019, 020, 021
070
Casio
Curtis Mathes
Denon
070
023, 024
014, 025, 026
Emerson
Fisher
020, 027, 028, 029,
030, 071
GE
078
Genexxa
Goldstar
Harmon Kardon
Hitachi
025, 026, 031, 072
032, 073
033
031
Inkel
034
JC Penney
JVC
043, 070
035
Kenwood
027, 036, 037, 038,
080, 081
Krell
019
013
Kyocera
Luxman
039, 040, 082, 083,
091
LXI
025, 070
019, 084
019, 041, 042, 085
043, 070
044
Magnavox
Marantz
MCS
MGA
Mission
Mitsubishi
NAD
019
044, 045
074, 092
046, 047
043
Nakamichi
NEC
Nikko
018, 026, 029
Need help? Call 1-800-989-4706
26
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 27 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
CD PLAYERS (Continued)
NSM
019
Onkyo
Optimus
048, 049, 075
025
052
100
42-5061
42-5071
42-5044
42-5045
104
42-5060
42-5062
42-5063
017, 020, 021, 031,
037, 050, 051, 053
Panasonic
Philips
069, 086, 093
019, 084
Pioneer
Proton
031, 054, 055, 072
019
Quasar
RCA
069
014, 020, 025, 056,
076
RCA Digital Video
Disc
096
Realistic
014, 020, 022, 026,
031, 042, 050
025
052
019
019
094
42-5061
42-5071
Rotel
SAE
Samsung
Sansui
019, 025, 057, 076,
087
Sanyo
020, 058, 071, 088,
095
Scott
014, 025, 026
025, 037, 042, 070
037, 042
Sears
Sharp
Sherwood
Shure
Sony
034, 042, 051, 059
043
060, 061
STS
013
Sylvania
019
Need help? Call 1-800-989-4706
27
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 28 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
CD PLAYERS (Continued)
Symphonic
TEAC
062
029, 042, 052, 062,
063, 064
Technics
069, 086, 089
Theta Digital
Toshiba
084
074
Vector Research
Victor
017, 032
035
Yamaha
018, 065, 066, 077
DIRECT-TO-HOME SATELLITE RECEIVERS
Echosphere
071
Echostar
Dish Network
Hughes Satellite
Optimus
071
071
075
076
16-2575
Panasonic
Primestar
RCA
069, 072
070
065
Sony
066
Star Sight Cable
Services
073
Toshiba
Uniden
067, 068, 074
076
HOME AUTOMATION
GE Homeminder
015
Home Automation
(For IR Command
Console)
014
X-10 (NEC) (For RF
Transceiver Console)
013
LASER DISC PLAYERS
Pioneer
Proscan
RCA
093
146
146
SATELLITE RECEIVERS
Amplica
028
Birdview
029
Channel Master
030, 031, 032
Need help? Call 1-800-989-4706
28
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 29 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
SATELLITE RECEIVERS (Continued)
Chaparral
013, 014, 033
014
Cheyenne
Drake
015, 016, 038, 039,
040
DX Antenna
Echostar
021, 035
041, 042, 043
Fujitsu
044, 045
General Instruments
Janeil
017, 018, 019, 046
049
Jerrold
050
Kenwood
Luxor
051
052
Macom State
Norstat
053
054
Realistic
020, 056, 057
Scientific Atlanta
Sierra I, II, III
Star Trak
STS
060
014
061
021, 022, 023, 024
Super Guide
Toshiba
062
025
Uniden
026, 064
027
Video Cipher II
TELEVISIONS
185
Abex
Acme
003
ADA
030
ADC
004, 097
014, 186
187
Admiral
Adventura
Aiko
029
Alleron
Amtron
Akai
059
051
015
Amstrad
Anam National
202
016, 051, 055, 205,
206, 207
Need help? Call 1-800-989-4706
29
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 30 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
TELEVISIONS (Continued)
AOC
017, 018, 020, 022,
027, 188, 208
Audiovox
Belcor
051
017
Bell & Howell
Bradford
Brokwood
Candle
014, 062, 096
051
017
017, 021, 022, 187
Capehart
Celebrity
Centurion
Cetronic
Citizen
188
015
022
055
017, 021, 022, 029,
051, 055, 084, 118,
184, 187, 190
Clairtone
Classic
027
055
Colortyme
Concerto
Contec/Cony
017, 022, 023, 213
017, 022
024, 026, 027, 051,
055, 184
Craig
051, 055
Crown
051, 055, 184
Curtis Mathes
013, 017, 022, 028,
062, 084, 118, 184
CXC
051, 055
Daewoo
017, 018, 022, 029,
030, 031, 055, 098,
139, 140, 184
Daytron
017, 022, 184
013
Dimensia
Dumont
017, 134
055
Dynasty
Dynatech
Electroband
Electrohome
191
015, 027
016, 017, 018, 022,
035
Emerson
017, 022, 027, 036,
037, 038, 039, 040,
043, 044, 045, 046,
Need help? Call 1-800-989-4706
30
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 31 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
TELEVISIONS (Continued)
Emerson (continued) 047, 048, 049, 050,
051, 052, 053, 054,
055, 056, 057, 058,
059, 062, 136, 137,
176, 184, 190, 192,
210
Envision
Fisher
Fujitso
Funai
017, 022
026, 062, 064, 193
059
051, 055, 059
051, 055
Futuretec
GE
013, 016, 017, 022,
035, 065, 067, 068,
100, 176, 177, 179,
180, 194
Gibralter
Goldstar
017, 134
017, 018, 022, 069,
070, 071,168, 169,
184, 185
Grundy
Hallmark
Harvard
Hitachi
051, 059, 184
017, 022
051
017, 022, 024, 026,
072, 073, 074, 100,
150, 151, 152, 153,
154, 155, 156, 157,
158, 159, 160, 161,
163, 184, 192, 211,
212
IMA
051
075
187
075
015
Infinity
Janeil
JBL
JCB
JC Penney
013, 017, 018, 021,
022, 035, 065, 067,
071, 076, 077, 084,
100, 118, 141, 184,
185, 194, 214
Jensen
JVC
017, 022
024, 026, 067, 073,
078, 079, 080, 102,
171, 172, 184, 195
Need help? Call 1-800-989-4706
31
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 32 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
TELEVISIONS (Continued)
Kawasho
KaypanI
KEC
015, 017, 022
188
055
Kenwood
017, 022
Kloss Novabeam
KTV
081, 082, 187
027, 051, 055, 083,
184, 190
Lodgenet
Loewe
Logik
096
075
096
Luxman
LXI
017, 022
013, 022, 062, 075,
084, 194
Megatron
Magnavox
022, 072
017, 021, 022, 075,
081, 082, 087, 088,
089, 090, 101, 102,
143, 145, 146, 197
Majestic
Marantz
Matsui
MEI
096
017, 022, 075, 091
075
027
Memorex
014, 018, 022, 062,
096
MGA
017, 018, 022, 035,
059, 064, 092,
Midland
067, 134, 184, 185,
194
Minutz
065
Mitsubishi
017, 018, 022, 035,
059, 064, 092, 094,
102, 138
Montgomery Ward
013, 014, 017, 018,
022, 037, 046, 059,
065, 075, 081, 082,
087, 088, 089, 096,
100, 101, 108, 132,
133, 197
Motorola
MTC
016, 186
017, 018, 022, 027,
084, 118, 191
Multitech
051, 191
Need help? Call 1-800-989-4706
32
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 33 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
TELEVISIONS (Continued)
Multivision
NAD
097
022, 084, 198
NEC
016, 017, 018, 022,
098, 102, 108, 213
Nikei
055
Nikko
NTC
022, 029
029
Onking
Onwa
Optimus
055
051, 055
183
198
31-3031
Optonica
Orion
108, 186
048
Panasonic
Philco
016, 067, 075, 183
016, 017, 018, 021,
022, 075, 081,082,
087, 088, 090, 184,
197
Philips
016, 017, 019, 021,
022, 075, 081, 082,
087, 088, 089, 099,
100, 101, 102, 184
Pilot
017, 184
Pioneer
017, 022, 103, 104,
105, 192, 198
Portland
017, 018, 022, 029,
184
Price Club
Prism
118
067
Proscan
Proton
013, 194
017, 022, 106, 184,
188, 199
Pulsar
017, 134
Quasar
016, 067, 083, 107
RadioShack/Realistic 013
16-291
16-292
017
022
062
16-288
16-263
16-229
16-261
16-515
Need help? Call 1-800-989-4706
33
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 34 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
TELEVISIONS (Continued)
RadioShack/Realistic 108
(continued)
Code(s)
16-232
16-233
16-242
16-246
16-251
16-252
16-253
16-255
16-256
16-260
16-262
16-288
184
013
16-254
16-255
16-256
16-291
16-292
RCA
013, 016, 017, 018,
020, 022, 109, 111,
112, 113, 114, 115,
116, 142, 192, 194,
200, 201
Rhapsody
Runco
027
134
Sampo
017, 022, 184, 185,
188
Samsung
017, 018, 022, 024,
028, 084, 117, 118,
119, 184, 185, 214,
217
Samsux
Sanyo
184
017, 026, 062, 064,
120, 121, 193
Scotch
Scott
022
017, 022, 037, 048,
051, 055, 059, 184
Sears
013, 017, 022, 026,
059, 062, 064, 079,
084, 118, 122, 123,
193, 194, 202, 210
Sharp
017, 022, 108, 124,
125, 126, 127, 135,
184, 186
Shogun
017
Signature
Simpson
014, 096, 128
021
Need help? Call 1-800-989-4706
34
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 35 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
TELEVISIONS (Continued)
Sonic
027
Sony
015, 019
Soundesign
017, 021, 022, 051,
055, 059
Squareview
SSS
202
017, 051, 055
Starlite
051
187
015
Supremacy
Supreme
Sylvania
017, 021, 022, 075,
081, 082, 087, 088,
089, 090, 101, 174,
197
Symphonic
Tandy
046, 051, 202
186
Tatung
016, 191
067
Technics
Techwood
Teknika
017, 022, 067
017, 018, 021, 022,
026, 029, 051, 055,
059, 084, 089, 096,
118, 183, 184, 187
Telecaption
Telerent
Tera
130
096
199
TMK
017, 022
Toshiba
026, 062, 084, 102,
118, 122, 130, 131,
214
Totevision
Universal
Victor
184
065, 100
079, 195
017, 018, 022
187
Vidtech
Viking
Yamaha
Yupiteru
Zenith
017, 018, 022
055
096, 134, 166
Need help? Call 1-800-989-4706
35
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 36 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
TV/VCR COMBINATIONS
RadioShack
183 (TV functions) 16-421/
122 (VCR func-
tions)
16-422
VCRs
014
Admiral
Adventura
Aiko
039
040
Aiwa
015, 039
Akai
016, 017, 018, 019,
020, 021, 042, 124,
125
American High
Asha
073
026
Audio Dynamics
Audiovox
Bell & Howell
Beaumark
Broksonic
Calix
022, 023
027
024
026
025, 038
027
Candle
026, 027, 028, 029,
030, 031, 032
Canon
Capehart
Carver
CCE
035, 073, 127
033, 123
075
040, 074
Citizen
026, 027, 028, 029,
030, 031, 032, 040
Colortyme
Colt
022
074
Craig
026, 027, 036, 074
Curtis Mathes
013, 015, 022, 026,
029, 031, 035, 037,
073, 128
Cybernex
Daewoo
026
028, 030, 032, 038,
039, 040, 041, 123
Daytron
DBX
123
022, 023
013
Dimensia
Need help? Call 1-800-989-4706
36
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 37 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
VCRs (Continued)
015, 039
Dynatech
Electrohome
Electrophonic
Emerson
027, 042
027
015, 019, 025, 027,
028, 037, 038, 039,
042, 043, 044, 045,
046, 047, 048, 049,
050, 051, 052, 053,
054, 055, 056, 057,
058, 060, 073, 078,
118, 129, 130
Fisher
024, 036, 061, 062,
063, 064, 065, 131
Fuji
073, 132
015, 039
039
Funai
Garrard
GE
013, 026, 035, 066,
073, 128, 133
Goldstar
022, 027, 031, 067,
134
Gradiente
039
Harley Davidson
Harman Kardon
Harwood
039
022, 081
074
Headquarter
Hitachi
024
015, 068, 069, 070,
120, 124, 133, 135
HI-Q
036
073
073
Instant Replay
JCL
JC Penney
022, 023, 024, 026,
027, 035, 068, 069,
072, 073, 120, 124,
131
Jensen
JVC
124
022, 023, 024, 031,
124, 136
Kenwood
022, 023, 024, 029,
031, 124, 136
KLH
074, 144
027, 073
015, 039
Kodak
Lloyd
Need help? Call 1-800-989-4706
37
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 38 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
VCRs (Continued)
Logik
074
027
LXI
Magnavox
035, 073, 075, 076,
117, 121, 137
Magnin
026
Marantz
022, 023, 024, 029,
031, 073, 075, 077,
127
Marta
027
073
073
Matsushita
MEI
Memorex
014, 015, 024, 026,
027, 036, 039, 056,
073, 117, 125
MGA
042, 078
026
MGN Technology
Midland
066
Minolta
068, 069, 120
Mitsubishi
042, 055, 068, 069,
078, 079, 081, 082,
083, 084, 086, 087,
136
Montgomery Ward
014, 088, 014, 015,
026, 027, 028, 036,
039, 042, 068, 069,
073, 074, 088, 114,
120, 129
Motorola
MTC
014, 073
015, 026, 039
Multitech
015, 026, 039, 066,
074
NEC
022, 023, 024, 029,
031, 077, 089, 090,
091, 092, 124, 136
Nikko
027
026
073
014
Noblex
Olympus
Optimus
16-538
16-539
16-540
027
16-406
16-408
16-410
Need help? Call 1-800-989-4706
38
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 39 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
VCRs (Continued)
027 (continued)
Optimus (continued)
16-411
16-529
16-530
16-623
16-705
149
150
16-545
16-419
16-423
122
Optonica
088, 147
Panasonic
035, 073, 122, 138,
139, 140
Pentax
029, 068, 069, 120,
133
Pentex Research
Philco
031
035, 073, 075, 076
073, 075, 088, 137
027
Philips
Pilot
Pioneer
023, 068, 093, 094,
136
Portland
Proscan
Protec
Pulsar
Quarter
Quartz
Quasar
RCA
029, 030, 032, 123
013
074
117
024
024
035, 073, 138
013, 016, 026, 068,
069, 073, 095, 096,
097, 098, 099, 100,
101, 102, 103, 104,
120, 128, 133, 138
RadioShack/Realistic 014
16-542
16-544
16-616
16-627
16-627
16-628
16-653
015
16-404
16-405
16-410
16-411
Need help? Call 1-800-989-4706
39
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 40 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
VCRs (Continued)
RadioShack/Realistic 015 (continued)
(continued)
16-411
16-508
16-510
16-519
16-622
16-703
16-704
027
16-408
16-414
16-515
16-534
16-535
16-624
035
036
16-651
16-705
16-511
16-512
16-513
16-515
16-516
16-518
16-613
16-614
16-615
16-652
039
16-404
16-406
16-410
16-411
16-508
16-510
16-519
16-522
16-703
16-704
073
16-651
16-705
148
149
150
15-1957
16-545
16-419
16-423
151
16-425
013, 024, 026, 042,
063, 088, 122, 125
Radix
027
027
141
Randex
Ricoh
Need help? Call 1-800-989-4706
40
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 41 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
VCRs (Continued)
117
Runco
Samsung
018, 026, 028, 046,
066, 125
Sankyo
Sansui
Sanyo
Scott
014, 117
023, 105, 124, 136
024, 026, 036
025, 028, 038, 045,
051, 078, 106, 129
Sears
024, 027, 036, 061,
062, 063, 064, 068,
069, 073, 120, 131
Sharp
014, 015, 030, 042,
088
Shintom
017, 069, 074, 111,
145
Shogun
Signature
Singer
026
015
073, 074
Sony
017, 111, 112, 132,
141
STS
073, 120
Sylvania
015, 035, 039, 073,
075, 076, 078, 137
Symphonic
Tandy
015, 039
015, 024
027
Tashiko
Tatung
124
TEAC
015, 039, 098, 124
073, 122
Technics
Teknika
015, 027, 039, 073,
113, 142
Toshiba
028, 062, 064, 068,
078, 106, 129
Totevision
TMK
026, 027
026, 037, 060
026
Unitech
Vector Research
Victor
022, 023, 028, 029
023
Video Concepts
022, 023, 028, 029,
042
Need help? Call 1-800-989-4706
41
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 42 Monday, July 19, 1999 12:50 PM
RadioShack
Cat. No.
Manufacturer
Code(s)
VCRs (Continued)
026
Videosonic
XR-1000
Yamaha
073, 039, 074
022, 023, 024, 031,
124
Zenith
017, 111, 117, 132,
141
Need help? Call 1-800-989-4706
42
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 43 Monday, July 19, 1999 12:50 PM
CARE AND MAINTENANCE
Your RadioShack 7-in-1 Remote Control is an ex-
ample of superior design and craftsmanship. The
following suggestions will help you care for your
7-in-1 so you can enjoy it for years.
Keep the 7-in-1 dry. If it gets wet,
wipe it dry immediately. Liquids can
contain minerals that corrode elec-
tronic circuits.
Handle the 7-in-1 gently and careful-
ly. Dropping it can damage circuit
boards and cases and can cause it
to work improperly.
Use and store the 7-in-1 only in nor-
mal temperature environments.
Temperature extremes can shorten
the life of electronic devices, dam-
age batteries, and distort or melt
plastic parts.
Keep the 7-in-1 away from dust and
dirt, which can cause premature
wear of parts.
Wipe the 7-in-1 with a damp cloth
occasionally to keep it looking new.
Do not use harsh chemicals, clean-
ing solvents, or strong detergents to
clean it.
Modifying or tampering with the 7-in-1’s internal
components can cause a malfunction and invali-
date its warranty. If your 7-in-1 is not performing
as it should, take it to your local RadioShack store
for assistance.
Need help? Call 1-800-989-4706
43
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 44 Monday, July 19, 1999 12:50 PM
SPECIFICATIONS
Power ....................................... 4 AAA Batteries
Control Range:
IR .................................... 20 Feet (6.096 M)
RF .................................. 100 Feet (30.48 M)
1
7
1
Dimensions (HWD) ...... 8 /2 ¥ 2 /16 ¥ 1 /16 Inches
(21.6 ¥ 6.26 ¥ 2.65 cm)
Weight (Without Batteries) .......... 5.1 oz. (144 g)
Specifications are typical; individual units might
vary. Specifications are subject to change and im-
provement without notice.
Need help? Call 1-800-989-4706
44
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 45 Monday, July 19, 1999 12:50 PM
NOTES
Need help? Call 1-800-989-4706
45
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 46 Monday, July 19, 1999 12:50 PM
Need help? Call 1-800-989-4706
46
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 47 Monday, July 19, 1999 12:50 PM
Need help? Call 1-800-989-4706
47
Download from Www.Somanuals.com. All Manuals Search And Download.
15-1924.fm Page 48 Monday, July 19, 1999 12:50 PM
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing
defects in material and workmanship under normal use for ninety
(90) days from the date of purchase from RadioShack company-
owned stores and authorized RadioShack franchisees and deal-
ers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, IN-
CLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE-
SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DI-
RECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WAR-
RANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPE-
CIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Some states do not allow the limitations on how long an implied
warranty lasts or the exclusion of incidental or consequential dam-
ages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take
the product and the RadioShack sales receipt as proof of purchase
date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product
repair without charge for parts and labor; (b) replace the product
with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a re-
fund is made, become the property of RadioShack. New or recon-
ditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are
warranted for the remainder of the original warranty period. You
will be charged for repair or replacement of the product made after
the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or
attributable to acts of God, abuse, accident, misuse, improper or
abnormal usage, failure to follow instructions, improper installation
or maintenance, alteration, lightning or other incidence of excess
voltage or current; (b) any repairs other than those provided by a
RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, ship-
ping or insurance costs; or (f) costs of product removal, installa-
tion, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St.,
Suite 600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
4A8
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|