8/1WVNGV"#RRNKCPEG"9CNN"6CR"5WTIG"2TQVGEVQT
61-2402
OWNER’S MANUAL — Please read before using this equipment.
Thank you for purchasing a RadioShack 6-Outlet Appliance Wall Tap Surge Protector. Your
surge protector protects your valuable electronic devices from damage caused by sudden
electrical spikes and surges. It absorbs electrical spikes and power surges and ensures reliable
performance of connected devices by filtering electromagnetic and radio frequency
"+/2146#06"
If an icon appears at the end of a paragraph,
go to the box on that page with the
#
#
corresponding icon for pertinent information.
interference.
."
"
R
ý
— Warning
— Important
#
Rý
. — Caution
Power Shutdown Protection —
Protects the connected devices
from being damaged by shutting
down power when surge protection
is depleted.
PROTECTED WHEN LIT
Indicator — Lights green when
the connected devices are
protected.
"9#40+0)ý
"
Indication Tags — Lets you place
the supplied pairs of tags next to a
socket and on the device’s power
cord to identify the devices which are
connected to each AC socket so you
can avoid disconnecting the wrong
device.
R
R
Do not use the surge protector with an
aquarium or near wet locations.
Safety On
Safety Off
."%#76+10".
This product is intended for indoor use only.
•
•
This surge protector is not a lightning
arrestor and might not protect against
lightning-induced voltage surges.
Swift Detection and Protection —
Detects and protects against a
power surge of up to 6,000 volts and
42,500 amps within 1 nanosecond
(1 billionth of a second).
Safety Design Slide Covers —
Prevents children from inserting
metal objects into the unused AC
socket(s).
•
•
Be sure the total wattage of all connected
devices does not exceed 1875 watts.
Use the surge protector only with a three-
prong standard AC plug. The surge
protector cannot provide protection without
a grounded AC source.
12'4#6+10
1. Plug the surge protector into a three-
prong standard AC outlet. The
6417$.'5*116+0)
•
•
Retain Instructions — Retain the safety
and operating instructions for future
reference.
Condition
The PROTECTED WHEN LIT indicator does
not light.
PROTECTED WHEN LIT indicator
Damage — Unplug the surge protector from
the wall outlet and replace it:
lights.
#
Solution
2. Plug the device(s) you want to protect
into the AC socket(s). The connected
devices are protected.
a. When the power cord or plug is damaged.
The surge protector's AC line is no longer
protected from surges; replace the surge
protector. The surge protector may have
received a power surge or spike beyond its
specified limits that might overload the
protection circuitry and make it inactive. If this
happened, the surge protector should have
absorbed enough of the surge to protect the
connected equipment, but it will not protect
against future surges and spikes.
b. If liquid has been spilled or objects have
fallen into the surge protector.
c. If the surge protector has been exposed
to rain or water.
If the PROTECTED WHEN LIT indicator
does not light, see “Troubleshooting”.
d. If the surge protector has been dropped
or damaged in any way.
75+0)"6*'"5#('6;"5.+&'"
%18'4
e. When the PROTECTED WHEN LIT
indicator goes out.
Your surge protector is equipped with a
safety slide cover on each of its six AC
sockets. Slide up the cover to cover the
unused AC socket(s). Slide them down when
you’re ready to use the sockets.
"+/2146#06"
#
#
Operating this surge protector from a non-
grounded outlet will invalidate your “Connected
Equipment Guarantee”, and put your valuable
equipment at risk.
75+0)"6*'"+0&+%#6+10"6#)5
Your surge protector is supplied with pairs of
indication tags to identify which device’s
power cords are connected to which AC
socket. Stick a large color tag on the power
cord near the base of the device and the
same color small tag next to the surge
protector’s target AC socket.
© 2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|