Radio Shack Speaker 40 289 User Guide

TM  
THE PERFORMANCE YOU NEED  
40 W 2-Way In-Ceiling Speaker  
Please read this users guide before using your new  
speaker.  
User’s Guide  
40-289  
© 2009. Ignition L. P. All rights reserved. Auvio is a trademark used by Ignition L.P.  
Package and insert are recyclable. Insert contains recycled material.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Remove the inner cardboard  
disc from the supplied  
template/paint mask and  
keep it for later. Use the outer  
portion of the mask as a  
template to mark the cutout  
hole size and location for mounting the  
speaker.  
Template  
ꢀ. Use a drywall or keyhole saw to cut the hole.  
(Optional) Painting the Grille  
nNote: Do not paint internal speaker components.  
We recommend you spray-paint the grille so no paint  
gets in or blocks the holes.  
1. To remove the grille, insert  
a paper clip into one of the  
openings and pull up.  
ꢀ. Remove the dust cloth from behind the grille and  
replace it after you finish painting.  
Template mask  
(Optional) Painting the  
Frame  
To prevent paint from entering the  
speaker, remove the grille and  
insert the supplied cardboard paint  
mask. After the paint is dry, remove  
the paint mask and replace the  
grille.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Connecting speaker wires  
Connect the cable leads from the outputs on your  
amplifier to the input terminal posts on the rear of  
your loudspeaker cabinet. We recommend you use  
wire that is color-coded or otherwise marked on to  
help you connect the wire correctly.  
1. Route the speaker wire to the speaker from the  
amplifier.  
ꢀ. Separate about 4 inches of speaker wire at each  
end.  
ꢁ. Using a wire stripper, remove about ¼ inch of  
insulation from each wire and twist the exposed  
ends.  
ꢂ. Connect the positive marked (usually red) wire  
to a red speaker terminal by pressing the release  
tab. Insert the wire into the hole and release  
the tab. Repeat this procedure for the negative  
marked wire (usually black) and black terminal.  
Strip insulation  
Split wire  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃ. Connect the wire from the red speaker terminal  
to the amplifiers positive (+) terminal, then  
connect the wire from the black speaker terminal  
to the amplifiers negative (–) terminal.  
n
Notes:  
Avoid routing the speaker wire near electrical wires.  
Do not nail, staple, or otherwise puncture the  
speaker wire.  
Before connecting your speaker to an amplifier,  
make sure the amplifier and all associated  
equipment is turned off.  
Make sure the impedance of the amplifier matches  
with the speaker.  
3 Mounting the Speaker  
1. Remove the grille to expose  
the mounting screws.  
ꢀ. Be sure the mounting tabs are  
turned in, allowing the speaker  
to fit into the hole. Then insert  
the speaker into the mounting  
hole.  
ꢁ. Use the supplied screws to  
Mounting tabs  
tighten the mounting tabs to  
the wall or ceiling. Be careful  
not to overtighten.  
ꢂ. Replace the grille.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
nNote: When removing the speaker from the wall  
or ceiling, loosen the screws just enough to remove  
the speaker. This will prevent loss of the mounting  
tabs behind your wall.  
Maintenance  
Keep the amplifiers volume at the low position when  
you first turn it on to avoid damaging the speaker.  
Do not use overrating power, otherwise sound quality  
can be destroyed and loudspeaker drivers can be  
damaged.  
Clean your speaker with a soft cloth to avoid damaging  
your loudspeaker.  
Specifications  
Power handling (RMS/MAX)..........................20W RMS/40W Max  
Impedance..........................................................................8 ohms  
Woofer................................................................... 5.25 in(13.3cm)  
Tweeter........................................................................1 in (2.5cm)  
Sensitivity...................................................85dB+/-3dB @ 1W 1M  
Dimensions (W×H×D).............8 × 8 × 3.1” (202 × 202 × 80 mm)  
Specifications are subject to change and improvement without  
notice. Actual product may vary from the images found in this  
document.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
Ignition L.P. warrants this product against defects in materials and workmanship under  
normal use by the original purchaser for one (1) year after the date of purchase. IGNITION  
L.P. MAKES NO OTHER EXPRESS WARRANTIES.  
This warranty does not cover: (a) damage or failure caused by or attributable to abuse,  
misuse, failure to follow instructions, improper installation or maintenance, alteration,  
accident, Acts of God (such as floods or lightning), or excess voltage or current; (b)  
improper or incorrectly performed repairs by persons who are not a Ignition L.P. Authorized  
Service Facility; (c) consumables such as fuses or batteries; (d) ordinary wear and tear  
or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product  
removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons  
other than the original purchaser.  
Should a problem occur that is covered by this warranty, take the product and the sales  
receipt as proof of purchase date to the place of purchase in the U.S. Ignition L.P. will,  
at its option, unless otherwise provided by law: (a) repair the product without charge  
for parts and labor; (b) replace the product with the same or a comparable product; or  
(c) refund the purchase price. All replaced parts and products, and products on which  
a refund is made, become the property of Ignition L.P. New or reconditioned parts and  
products may be used in the performance of warranty service. Repaired or replaced parts  
and products are warranted for the remainder of the original warranty period.You will be  
charged for repair or replacement of the product made after the expiration of the warranty  
period.  
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT  
STATED INTHIS LIMITED WARRANTY. ANY IMPLIED WARRANTIESTHAT MAY BE  
IMPOSED BY LAW, INCLUDINGTHE IMPLIED WARRANTY OF MERCHANTABILITY  
AND, IF APPLICABLE,THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR  
PURPOSE, SHALL EXPIRE ONTHE EXPIRATION OFTHE STATED WARRANTY PERIOD.  
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR  
RESPONSIBILITYTOTHE PURCHASER OFTHE PRODUCT OR ANY OTHER PERSON  
OR ENTITY WITH RESPECTTO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY  
OR INDIRECTLY BY USE OR PERFORMANCE OFTHE PRODUCT OR ARISING OUT OF  
ANY BREACH OFTHIS WARRANTY, INCLUDING, BUT NOT LIMITEDTO, ANY DAMAGES  
RESULTING FROM INCONVENIENCE AND ANY LOSS OFTIME, DATA, PROPERTY,  
REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-  
TIAL DAMAGES, EVEN IF IGNITION L.P. HAS BEEN ADVISED OFTHE POSSIBILITY OF  
SUCH DAMAGES.  
Some States do not allow limitations on how long an implied warranty lasts or the  
exclusion or limitation of incidental or consequential damages, so the above limitations  
or exclusions may not apply to you. This warranty gives you specific legal rights, and you  
may also have other rights which vary from State to State.You may contact Ignition L.P. at:  
Ignition L.P., 3102 Maple Ave Suite 450, Dallas,TX 75201  
02/09  
For product support, call  
1-866-315-0426  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Protect the environment by recycling used electronics. Go to  
E-CyclingCentral.com to find an electronic recycling center near you.  
Get more from your audio and video equipment. See what  
you’ve been missing. With Auvio, you control the experience.  
Auvio was established by a group of technophiles to  
provide high quality audio and video products without  
the high sticker price. The Auvio philosophy is for you to  
experience audio and video as it was intended to be: pure  
and distortion free.  
We know electronics can be intimidating. Auvio simplifies  
your experience by providing the right products, with the  
right specs, to work with your equipment.  
Be confident about your purchase: your new Auvio product  
incorporates the latest technology, is built to the highest  
quality standards, and reduces environmental impact by  
complying with RoHS environmental restrictions.  
40-289  
07A09  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quantum Computer Drive Atlas V User Guide
Radio Shack Radio 12 791 User Guide
RCA DVD Player DRC620N User Guide
RTS Power Supply PS 31 User Guide
Samsung Computer Monitor 1100PPLUS User Guide
Samsung Microwave Oven ME1240SC User Guide
Samsung MP3 Player YP N30S User Guide
Samsung Printer Color and Monochrome Laser Printers and MFPs User Guide
SanDisk Computer Drive SDUFD2AA 1024 User Guide
SanDisk MP3 Player CLIP 7UM ENG User Guide