Wireless 5.8 GHz Digital Audio Link
OWNER’S MANUAL —
Please read before using this equipment.
15-1974
VOLUME — Turn to
adjust sound level of the
connected surround
speakers. You may
need to adjust your A/V
receiver’s volume for
balance.
POWER/PUSH OFF —
Press to power the receiver
on or off.
PACKAGE CONTENTS
RECEIVER
•
•
•
•
•
•
•
Transmitter
Speaker wire (for transmitter only)
Receiver
AC adapter
Adjustable stand
Owner’s Manual
Warranty
Power LED — Lights
red when the
receiver is powered
on.
Signal LED — This green LED flashes when
the receiver is searching for a signal from the
transmitter. It glows steadier and brighter as
the signal strength increases.
STANDBY / ON/OFF — Press to toggle
between standby mode and power on.
LED — Lights red when the transmitter is
in power on mode, and turns green when
in standby mode.
TRANSMITTER
This wireless transmitter and receiver system
use the latest 5.8 GHz technology that travels
through walls, floors, ceilings and other
obstacles, delivering high quality sound for
your home theater system’s rear surround
speakers. Using this wireless system, you will
experience movie theater quality sound in
your own home using your current home
theater surround system. We have designed
this system for use with your surround sound
home theater system to enhance the quality
of the sound and balance coming from your
speakers. You can now eliminate running
long speaker wires through your rooms, while
enhancing the sound coming from those
speakers.
This system is compatible with most audio
sources such as televisions, VCRs, stereo
receivers/amplifiers, CD players, and
personal stereos. This unit allows you to
listen to wired speakers in any room in the
house when a two-channel source is
connected to the transmitter. The audio link
system also tracks the volume setting of your
audio source, so that when you increase or
decrease the volume on the audio source,
the link’s connected speakers respond
accordingly.
Some of this system’s other features include:
• 6 user-adjustable channels
• 2 diversity receiver antennas for optimal
audio reception.
WARNING: To reduce the risk of fire or shock hazard,
do not expose this product to rain or moisture.
How It Works
CAUTION
The transmitter converts the audio signal
from your audio source into a 5.8GHz radio
frequency and transmits it to the receiver.
The receiver will pick up the best signal from
one of its two antennas and convert the
signal back to its original form. Using a
powerful amplifier, the signal is passed to
your connected rear surround speakers. The
result is an enhanced sound quality resulting
in a theater quality surround sound
experience.
• Adjustable speaker and line level input
control
RISK OF ELECTRIC SHOCK
!
DO NOT OPEN
• 256 option personal ID Code
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
• Ideal for Dolby 5.1 Digital, Pro Logic II,
DTS, SCAD and DVD Audio Systems
• Provides digital transmission for superb
audio clarity
The lightning symbol is intended to alert you to the
presence of uninsulated dangerous voltage within this
product’s enclosure that might be of sufficient
magnitude to constitute a risk of electric shock. Do not
open the product’s case.
• Immune to interference from microwave
ovens and other popular 2.4GHz
equipment
The exclamation symbol is intended to inform you that
important operating and maintenance instructions are
included in the literature accompanying this product.
!
• Signal range of 30 feet
© 2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
IMPORTANT
!
!
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for
pertinent information.
— Warning
— Important
Ô —Note
!
o
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP OVERVIEW
Your new Digital Audio Link Wireless 5.8GHz is easy to set up using your existing Home
Theater or stereo components. This system is compatible with most audio source. Please take
a few minutes to read this manual before you start.
1. Unpack the wireless system and accessories.
2. Select the best location to set up the transmitter and receiver.
3. Connect the transmitter to your audio source and power it on.
4. Connect the receiver to your rear surround speakers and power it on.
5. Adjust the antennas for best reception.
6. Set the input level on the transmitter for best sound level.
7. Adjust the receiver volume to the desired level.
PLACEMENT
It is best to place the transmitter and receiver as high as possible in an area where there will be
Ô NOTES Ô
the least traffic. Ô
Placement
We recommend you place the transmitter on top of your audio source or stereo stand. For use
with a home theater system, hook the receiver up to the rear surround speakers.
•
We have included a unique, adjustable stand
designed to cradle either unit, both vertically
and horizontally depending on what best
adapts to your environment.
CONNECTING THE TRANSMITTER
•
•
You may find that reception is improved when
the units are moved closer together, but not
less than three feet apart.
Connect the transmitter to your audio device using speaker wires or stereo cables. Do not use
both speaker wire and stereo cables. Do not connect speakers to this transmitter. Ô
TRANSMITTER REAR VIEW
This system will not work properly from within
an enclosed metal cabinet.
LINE IN — Connect the LINE OUT
DC 9V — Connect the
Antenna — Rotate
180 degrees
horizontally, or tilt
back and forth to
adjust the signal
sent to the receiver.
(Left and Right) from an audio source
to these inputs using stereo cables
(not supplied).
supplied AC adapter to
the transmitter at this DC
input jack
Connecting the Transmitter
•
Power off the audio source, A/V receiver or
Home Theater before making any
connections.
•
This system is not compatible with 6.1
systems.
HI LEVEL AUDIO IN — Connect the surround
or rear speaker outputs from your audio
source (A/V receiver or Home Theater
system) to these inputs using the supplied
speaker wire.
CH — Set the switches of
this channel selector to
choose one of six preset
frequencies.
LEVEL ADJUST — Turn to
adjust the sound quality.
1. Power off the audio source or A/V receiver before making any connections.
If your audio source’s output uses stereo jacks connect the Left / Right LINE OUT from the
audio source to the Left / Right LINE IN on the transmitter with stereo cables (not supplied).
Match Left to Left and Right to Right.
If you use your A/V receiver or Home Theater as the audio source you can connect the
surround (rear) speaker outputs to the transmitter’s HI LEVEL AUDIO IN with the supplied
speaker wire. Match polarity (+ / –) and Left /Right appropriately.
2. Connect the supplied AC adapter’s barrel-shaped plug into the DC 9V jack, and then plug
the transformer into a standard AC outlet.
3. Set the level adjust to the minimum.
4. Push STANDBY / ON /OFF to toggle between power on (the LED lights red) and standby (the
LED lights green).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE RECEIVER
RECEIVER
REAR VIEW
Antennas — Rotate either or both antennae to adjust
reception.
AUDIO OUT — Connect your
surround speakers to these outputs
with speaker wire (not supplied).
AC power cord
Antenna cradles — Fold antennas to rest in these
cradles when they are not in use.
1. Connect your left and right rear surround speakers using speaker wire (not supplied).
2. Set the volume control to low.
3. Plug the AC power cord into the nearest wall outlet.
4. Make sure the transmitter is either in standby mode or powered on before turning the
receiver on.
The red LED will be illuminated on both units. The green LED on the receiver will flash
indicating it is searching for the transmitter signal and flicker until it finds a clear signal from
the transmitter, at which time the receiver’s LED glows solid green.
5. If you have a clear signal, adjust the volume control on the receiver so the audio level
coming from your rear surround speakers is balanced with the rest of your system.
6. If there is noise or distortion of the sound, you will need to adjust the antenna and the
transmitter input level.
ADJUSTING THE ANTENNAS
The transmitter and receiver are provided with diversity antennas that fold up or down and
rotate through a horizontal range of 180 degrees for flawless audio reception and maximum
positioning options, enabling either or both the transmitter and receiver to be positioned
vertically or horizontally. The receiver has two antennas to maximize reception.
• Make sure that the flat side of the antennas on both the transmitter and receiver are facing
toward each other.
• The maximum transmission range (up to 30 feet) is achieved when there is a clear line of
sight between the transmitter and receiver antennas.
• You may wish to position the antennas so they face the ceiling at a 45 degree angle,
reflecting the transmitter signals to the receiver.
SETTING THE INPUT LEVEL
The input level is located on the back panel of the transmitter which can be used to adjust either
the line input or speaker input to the transmitter. The input level balances low level input signals
between the audio source and the transmitter. If there is distortion from your surround speakers
when you raise the main volume of your system, the input level should be adjusted down. If the
input level is set too low, the surround speakers will not get enough power to raise the volume to
a desired level.
1. Set the front speaker volume level to slightly higher than desired to establish a proper
output signal level for your rear speaker output.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Set the transmitter input level to the minimum setting.
3. Set the receiver volume control to about three quarters the volume level.
4. Adjust the transmitter input level to obtain the highest sound quality without distortion.
5. Adjust the receiver volume control to balance the rear sound with the rest of the speakers.
CHANGING THE CHANNEL FREQUENCY
TRANSMITTER
REAR VIEW
Ô NOTES Ô
•
•
•
Be sure to turn the transmitter power back on
after you have changed each channel. The
green led on the receiver will also flash when
the transmitter is in standby mode.
The receiver’s green LED will vary from a
very dim, flickering green when the signal
quality is poor to a bright, steady green when
the signal is strong.
If the receiver fails to find any of the available
six channels, try cycling the receiver’s power
off and on, and repeating steps 1 through 4.
To minimize interference from other 5.8GHz systems such as a 5.8 GHz cordless phone or a
wireless LAN in your environment, this system allows the user to select one of six preset
channels. If you should experience interference from another 5.8GHz system, select a different
transmission channel. The channel selector is located on the back panel of the transmitter.Ô
1. With both the receiver and transmitter plugged in and powered on, push the power button
to put the transmitter in standby mode.
2. Use a pointed object such as a pen or straightened paper clip to set the channel selector
on the transmitter to one of the six available channels.
Channel #
Position 1
Position 2
Position 3
1
2
3
4
5
6
ON
OFF
ON
ON
ON
ON
ON
OFF
OFF
ON
ON
OFF
ON
ON
OFF
OFF
OFF
ON
3. Press the power button again to set the transmitter so that the unit will reset when it powers
back on.
4. The receiver will automatically search for the selected channel. The green LED on the front
panel of the receiver will flash to indicate the receiver is searching for the transmitter signal.
5. Keep switching channels on the transmitter until the receiver has a clear signal and the
green LED glows brightly.
SETTING A PERSONAL ID CODE
If you should have another unit or system operating in your home, this feature has been added
to ensure that the transmitted signal is only received by the receiver set to the same code as the
transmitter. In order to receive audio signal only from your transmitter, you have the option of
selecting from 256 possible combinations, to set a personal ID code for your wireless system. If
you have two transmitters setup near each other, you may also need to change the channel
frequency for better reception.
1. Make sure both the transmitter and the receiver are unplugged from the AC power source.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Loosen the screw with a screw driver and remove the panel on the bottom of both the
receiver and the transmitter units.
IMPORTANT
!
!
FCC INFORMATION
BOTTOM VIEW
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
•
•
•
Reorient or relocate the receiving
antenna.
3. Use a pen or a pointed object such as a straightened paper clip to move the levers and
change the code on the transmitter.
Increase the separation between the
equipment and receiver.
4. Use a pen or a pointed object such as a straightened paper clip to move the levers and set
the same code on the receiver. Put the panel back on and tighten the screw before
plugging the transmitter and receiver into the AC power source. Plug in and power on the
transmitter, and then plug in and power on the receiver to make sure the system is working
properly.
Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
•
•
Consult your local RadioShack store or
an experienced radio/TV technician for
help.
CARE
If you cannot eliminate the
interference, the FCC requires that you
stop using your audio link.
Keep the transmitter and receiver dry; if either unit gets wet, wipe it dry immediately. Use and
store the transmitter and receiver only in normal temperature environments. Handle them
carefully; do not drop them. Keep the transmitter and receiver away from dust and dirt, and wipe
them with a damp cloth occasionally to keep both looking new.
Changes or modifications not expressly
approved by RadioShack may cause
interference and void the user’s authority to
operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device may
not cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation.
SERVICE AND REPAIR
If your transmitter or receiver is not performing as it should, take it to your local RadioShack
store for assistance. To locate your nearest RadioShack, use the store locator feature on
the menu options. Modifying or tampering with the transmitter or receiver's internal components
can cause a malfunction and might invalidate its warranty and void your FCC authorization to
operate it.
Product:
Wireless 5.8 GHz
Digital Audio Link
Model:
15-1974
Responsible
Party:
RadioShack
100 Throckmorton
Fort Worth, TX
76102
Phone:
817-415-3200
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Suggestion
•
Make sure that the AC adapter is plugged into the transmitter and the
wall outlet.
The system does not
power on.
•
•
Make sure that the transmitter power cord is plugged into the wall outlet.
Make sure both units are powered on and that your audio source is
turned on and operating.
•
•
Make sure that your speakers are hooked up properly.
The system is not receiving
a signal.
Make sure the green LED on the receiver is illuminated. If it is not lit or it
is flickering, adjust the antennas
•
If you have set a personal ID Code for your system, make sure that both
units are set to the same code.
•
•
Make sure the audio going to the transmitter is not distorted.
The audio is distorted.
If your transmitter is hooked up to a Dolby Digital processor or receiver,
try adjusting the input power level.
•
•
•
Check that the antennas on the transmitter and receiver are in upright
positions with a clear line of sight to each other.
Move the transmitter and receiver closer together, but make sure they
are placed not less than three feet apart.
Cordless phones may cause some interference to the receiver. Position
the receiver farther away from these devices or change the channel on
the transmitter.
The system has noise.
•
Metal objects, such as some building structural supports, can cause
interference. Try positioning antennas to face the ceiling. The signal will
bounce off the ceiling avoiding direct contact with metal.
•
•
Try switching to another frequency channel.
Check the volume level on the receiver to make sure it is turned up
enough to be in balance with the rest of your system.
No sound from the rear
surround speakers
•
•
Make sure the transmitter is turned on and the red LED is lit. When the
transmitter is in standby mode, the receiver is searching for a signal.
Disconnect the audio link’s transmitter and receiver from AC power for
30 seconds. Then reconnect.
•
•
•
Make sure the speaker is connected to the receiver.
Check the speaker balance on your audio source.
No sound from one
speaker
5GHz 802.11a WLAN
interference
Set your 5 GHz WLAN band to 5.15- 5.35 GHz band range. Avoid using
the 5.8 GHz band.
SPECIFICATIONS
TRANSMITTER
Range .................................................................................................................................................. 30 feet
Audio Input Level (Low)..............................................................................................................................1 V
Audio Input Level (High) .............................................................................................................................4 V
Audio Input Impedance.....................................................................................................................20Kohms
Operating Current.................................................................................................................................500mA
Antenna × 1, dimension .......................................................................... 23mm (W) × 81mm (H) × 25mm (D)
Main unit dimension.............................................................................135mm (W) × 58mm (H) × 117mm (D)
RECEIVER
AC Power Supply.....................................................................................................................................120V
Audio Output Level at 1K Hz ..............................................................................................................25W × 2
Antenna × 2, dimension .......................................................................... 23mm (W) × 81mm (H) × 25mm (D)
Main unit dimension.............................................................................250mm (W) × 90mm (H) × 252mm (D)
Speaker impedance............................................................................................................................. 6 ohms
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for ninety (90) days from the date of purchase from RadioShack company-
owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABIL-
ITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE-
SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE
OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WAR-
RANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limita-
tion of incidental or consequential damages, so the above limitations or exclusions may not apply to
you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the property
of RadioShack. New or reconditioned parts and products may be used in the performance of war-
ranty service. Repaired or replaced parts and products are warranted for the remainder of the origi-
nal warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
09A03
15-1974
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|