Radio Shack Heart Rate Monitor 63 1520 User Guide

Receiver Watch  
Bike Mount Attach to your bicycle  
handlebars when riding. Then, fasten the  
watch around the bike mount.  
Storage Pouch Lets you conveniently carry  
your heart rate monitor wherever you go.  
For best results, moisten  
this area of the chest prior  
to attaching the chest strap  
Padded Center —  
contains the chest  
strap’s transmitter  
Wireless Heart  
Rate Monitor  
63-1520  
Chest Strap  
Step One  
Heart Rate Training Zone  
Step Two  
Setting the Date and Time  
Step Four  
To achieve the maximum health benefits from your  
workout, it is important to know your heart rate  
training zone. Your training zone is your maximum  
upper and lower heart rate (beats per minute) during  
exercise. Calculate your upper and lower heart rate  
limit using this formula:  
8. Press SET. HEIGHTand the current height appear.  
Setting the User Profile  
1. Repeatedly press MODE until the time and date appear.  
Before monitoring your heart rate, you must first enter your gender,  
age, weight, height, and activity score.  
1. Repeatedly press MODE until USERappears.  
9. Press ST/SP/+ to choose the display format (cmor in).  
2. Hold down SET until the clock format flashes (12 or 24 hour format). Press  
10. Press SET. The height digits flash. Press ST/SP/+ to select your  
ST/SP+ to select the desired format.  
height.  
2. Hold down SET until SEXappears.  
Men: 220 – age = MHR  
Women: 230 – age = MHR  
3. Press SET. The hour digit flashes. Repeatedly press ST/SP+ to set the hour. PM  
11. Press SET. ACTand the current activity score appear.  
appears for a PM hour.  
3. Press ST/SP/+ to select For M.  
Activity Score represents your general physical activity. If you do  
not regularly exercise, your score is 0(low). If you participate two  
or three times a week for one hour in modest physical activity, such  
as golf, horseback riding, gymnastics, table tennis, bowling, weight  
lifting, and yard work, your score is 1(medium). If you regularly  
participate in heavy physical exercise such as running, jogging,  
swimming, cycling, or skipping rope, your score is 2(high).  
Multiply your MHR by the percentages of the selected  
training zone. There are three training zones that are  
related to your MHR:  
4. Press SET. The minutes flash. Repeatedly press ST/SP+ to set the minutes.  
4. Press SET. AGEappears and the current age flashes. Repeatedly  
press ST/SP/+to select your age (599).  
5. Press SET. The year digits flash. Repeatedly press ST/SP+ to set the year  
( 2001to 2050).  
5. Press SET. WEIGHTand the current weight appear.  
Health Maintenance Zone (70% – 60%) — The  
lowest training intensity. For beginners and those  
who want to strengthen their cardiovascular  
system.  
6. Press SET. The date format flashes (MDor DM). Press ST/SP+ to select format.  
7. Press SET. The month digits flash. Repeatedly press ST/SP+ to set the month.  
8. Press SET. The date digit flashes. Press ST/SP+ to set the date.  
6. Repeatedly press ST/SP/+ to choose the display format (kgor  
lbs).  
12. Press SET. Your fitness index (range 1 – 76) appears.Your  
fitness index is based on your aerobic fitness, or your capacity to  
engage in forms of aerobic exercise. The higher the index, the  
fitter you are.  
7. Press SET. The weight digits flash. Repeatedly press ST/SP/+ to  
Aerobic Exercise Zone (80% – 70%) —  
Increases strength and endurance. It works  
within the body’s oxygen intake capability, burns  
more calories, and can be maintained over a  
longer period of time.  
set your weight.  
9. Press SET to enter ZONE/TIMEmode. The corresponding time zone digit flashes.  
Press ST/SP+ to select your time zone.  
Step Five  
10. Press SET to confirm and return to normal display.  
Anaerobic Exercise Zone (90% – 80%) —  
Generates speed and power. It works at or above  
the body’s oxygen intake capability and builds  
more muscle, but cannot be maintained over a  
long period of time.  
7. Press ST/SP/+ to turn the alert on or off. When alert is on, Ô  
Setting the Timer  
appears and three beeps sound at the end of exercise time.  
Step Three  
Setting the Alarm  
To use the timer, you need to set your target activity and exercise time.  
1. Repeatedly press MODE until TIMER, the current set timer, and  
8. Press SET. EXappears and the current exercise time flashes.  
9Ô appear.  
1. Repeatedly press MODE until ALARM and the current alarm time appear.  
9. Press ST/SP/+ to set the desired hours.  
For example, a 30-year old female who wants to  
determine her aerobic exercise zone would calculate  
it as follows:  
2. Hold down SET until T, ACT,and the current activity score appear.  
2. Hold down SET until the hour digits flash and 3 appears. Repeatedly press  
10. Press SET. The minute digits flash. Press ST/SP/+ to set the  
ST/SP/+ to set the hour.  
desired minutes.  
3. Press ST/SP/+ to select your activity score determined in your  
User Profile (0, 1, 2).  
230 – 30 = 200 (MHR)  
200 x .80 = 160 (Upper limit)  
200 x .60 = 120 (Lower limit)  
3. Press SET. The minute digits flash. Repeatedly press ST/SP/+ to set the minutes.  
11. Press SET to confirm.  
4. Press SET. LOWERappears and the current heart rate zone limit  
flashes. Repeatedly press ST/SP/+ to select your lower heart rate  
limit (30220).  
Make sure you fill in the target activity level and all the parameters  
in your user profile. Otherwise, the calorie count and % fat burned  
will not be available in training.  
4. Press SET to confirm.  
5. When the alarm is activated, it sounds at the set time every day. Press any button  
to silence it.  
What’s Included  
5. Press SET. UPPERappears and the current heart rate zone limit  
flashes. Repeatedly press ST/SP/+ to select your upper heart rate  
limit (80240).  
Leave out the heart rate limits if desired. The figures are  
automatically selected according to your inputs. If you enter heart  
rate limits, the lower limit must not exceed the higher limit.  
Watch/Monitor  
Chest Strap  
Bike Mount  
6. To turn off the alarm feature, repeatedly press MODE until ALARMand the current  
alarm time appear. Press SET until 3 disappears. Repeatedly press MODE to  
return to normal time display.  
e or dflash and a beep sounds if your lower or upper limits are  
exceeded.  
6. Press SET. ALERTappears and ONor OFFflashes.  
Storage Pouch  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio Stereo Equalizer PPEQ 86 User Guide
Renesas Switch M3T DCT42B 450 User Guide
ResMed Oxygen Equipment VPAP ST User Guide
Ricoh Printer DDST A, DDST B User Guide
Samsung Projector SP P410M User Guide
SanDisk Cell Phone Accessories miniSDHC User Guide
Sanyo Digital Camera VCC 4115P User Guide
SDI Technologies Computer Hardware SDIO Card User Guide
Sears CRT Television 2744392839 User Guide
Senco Staple Gun SLS15Mg User Guide