Using Your Phone
Connect to a Phone Line
Big Button Cordless Phone
with Headset Jack
43-3576
When the handset battery pack is fully charged, plug
the telephone cord into the TEL LINE jack on the back
of the base. Plug the other end into a telephone wall
jack.
Quick Start Guide
TEL LINE
for installing, setting up and using your new product
Jack
Wall
Jack
Install and Charge
the Handset Battery
1. Press down and
Connector
slide off the battery
cover.
Battery
Pack
2. Remove the battery
pack and plug the
battery pack’s
Cover
Wall Bracket
connector into the
socket in the battery
compartment (fits
Note: The illustration shows the wall-mount bracket
attached. See page 9 of your Owner's Manual for
how to attach and use the bracket.
Socket
only one way). Replace
the battery pack and the cover.
Your phone is set for tone dialing. If your phone uses
pulse service, please see “Choosing the Dialing
Mode” on page 12 in your Owner’s Manual.
3. Insert the AC adapter’s barrel plug into
the base’s DC IN 9V jack on the back of
the base, and
Making Calls
Base
route the excess
cord through the
strain relief slot.
Plug the adapter
into a wall outlet.
Pick up the handset and press TALK. Listen for the
dial tone, and then dial the number. Or, dial the
number and then press TALK.
Answering Calls
4. Place the
If Auto Talk is on, just pick up the handset from the
base. If Auto Talk is off, pick up the handset and
press TALK. For more information, see “Setting
Menu Options” on page 16 of your Owner’s Manual.
handset on the
base and charge
continuously for
15-20 hours
DC IN 9V
Jack
Strain Relief Slot
before using the phone.
If the handset is off the base, press TALK, or, with
Auto Talk on, press any number, ∗/TONE/f or #/g.
©2004 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are
trademarks used by RadioShack Corporation.
43-3576
Printed in China
04A04
Download from Www.Somanuals.com. All Manuals Search And Download.
UCZZ69434BZ
|