Radio Shack Car Video System PTC20LD User Guide

Model  
PTC20LD  
16:10 DIGITAL LCD-TV-Monitor  
19 Hi-Definition LCDFlat Panel TVw/Built-in DVDPlayer  
OPERATING MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
8.1  
Basic Operation  
DVD Setup Mode  
General Setup  
23  
23  
23  
8.2  
8.2.1  
8.2.2  
8.2.3  
8.2.4  
8.2.5  
THE DVD SETUP  
MENU SYSTEM  
25  
25  
8
8.2.2 Speaker Setup Page  
Dolby Digital Setup  
Video Setup  
26  
28  
Preference Setup  
TROUBLESHOOTING  
AND ADVICE  
9
32  
33  
10  
SPECIFICATIONS  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREFACE  
Thank you for buying this TV ! Please read this manual thoroughly before operating the monitor.  
Make sure the monitor was not damaged in transit. Should the monitor is damaged, do no install  
it and contact your dealer. Check that you have all the accessories according to the model.  
SAFETY PRECAUTIONS  
Preparation  
Put the monitor on a stable surface.  
Do not use the monitor with others fixations than those provided or  
suggested by the manufacturer.  
Minimum distances  
10cm  
10cm 5cm  
Do not place any material on the monitor.  
20cm  
Do not block or cover the ventilation openings on the monitor  
If you have a wall mount, check that it is steady  
Power source  
The monitor must be plugged with a tension source of 110 volts and 60 Hz.  
Connexion cables  
Power cord and cables must be properly routed and protected to prevent  
people from stepping on them and causing the monitor to fall.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Heating sources and humidity  
Keep the monitor dry and away from humidity.  
Keep the monitor away from heat sources  
Cleaning and maintenance  
Unplug the monitor before cleaning it. Do not use solvents or liquids  
to clean the monitor.  
Only clean the monitor with a soft and dry cloth.  
In case of troubleshooting, do not use spare parts other than those  
suggested by  
the manufacturer. Using inadequate spare parts can lead to electric  
shocks, short-circuits fire or other incidents.  
Departure in holidays  
Unplug the LCD during lighting storms or when unused for long periods  
of time.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front , Back , Connections of LCD  
Front View  
IR ON  
/
OFF LED  
Back View and Control Connections  
RF IN  
V IN  
1
2
S VIDEO  
HDMI  
VGA  
3
4
5
PC AUDIO  
Pr  
6
7
Pb  
8
Y
9
R IN  
10  
11  
12  
13  
L IN  
PHONE  
DC IN  
VGA  
S
VID EO  
V
IN  
RF IN  
Pb  
PC AUDIO  
DC IN  
PHONE  
L
IN  
R
IN  
Y
Pr  
HDMI  
13  
12 11 10  
9
8
7
6
5
4
3
2
1
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Side View  
DVD Player Control  
DVD Function Keys  
EJECT DISK BUTTON  
PLAY / PAUSE  
Disc Slot inside  
(Label side toward user)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV INSTALLTION DRAWINGS  
CONNECTION ANTENNAS  
VHF  
ANTENNA  
VHF  
ANTENNA  
OUTDOOR  
ANTENNA  
AMPLIFIER  
INDOOR  
ANTENNA  
AMPLIFIER  
75 OHM  
ANTENNA  
PLUG  
POWER PLUG OF  
ANTENNA  
AMPLIFIER  
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as  
shown can be sourced from TV equipment shops, which will provide service for correct installation  
and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.In  
case of signal of closed circuit TV,  
VIDEO CONNECTION  
VGA  
S
VID EO  
V
IN  
RF IN  
DC IN  
PHONE  
L
IN  
R
IN  
Y
Pb  
Pr PC AUDIO  
HDMI  
S VIDEO CONNECTION  
VGA  
S
VID EO  
V
IN  
RF IN  
Pb  
PC AUDIO  
Pr  
DC IN  
PHONE  
L
IN  
R
IN  
Y
HDMI  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCINPUT CONNECTION  
VGA  
PC AUDIO  
VGA  
S
VIDEO  
V
IN  
RF IN  
DC IN  
PHONE  
L
IN  
R
IN  
Y
Pb  
Pr PC A UDIO  
HDMI  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
1. Connecting to the AC input cable then press the main power switch to switch ON LCD TV. At this time the TV will enter  
standby mode and indicator show red.  
2. Use POWER button can turn ON LCD TV from standby mode.  
1. Press POWER button or  
button on the remote control to enter standby mode. The indicator is red.  
2. Using main power switch turns off LCD TV completely.  
Tuning Band  
Air  
Picture  
Audio  
DTV-Signal  
Auto Ch Search  
Add On Ch Search  
Manual Ch Set  
Channel Labels  
Menu Language  
Setup  
English  
Feature  
Enter  
Menu  
To Exit  
To Move  
To Select  
Press MENU to display the main menu.  
Press  
Use  
/
repeatedly to select the SET MENU.  
and to select LANGUAGE.  
and button to select your desired language.  
/
/
P ress  
When you are satisfied with your choice, press the MENU  
to exit.  
1. Press VOL+/- to adjust the volume.  
2. If you want to switch the sound OFF , press the MUTE  
.
3. You can cancel this function by pressing MUTE or VOL+.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
- Press the MENU button to display the main menu.  
- Use  
/
/
/
buttons to select and adjust the available menus.  
Picture Mode  
Contrast  
Audio Mode  
User  
Voice  
Picture  
Audio  
Picture  
Audio  
English  
50  
50  
50  
50  
Audio Language  
Brightness  
Sharpness  
Color  
Bass  
30  
30  
0
Treble  
Balance  
Tint  
50  
Digital Audio Output  
PCM  
Setup  
Setup  
Aspect Ratio  
Wide  
Feature  
Feature  
Menu  
Menu  
To Exit  
Enter  
Enter  
To Move  
To Select  
To Exit  
To Move  
To Select  
Time Set  
Tuning Band  
DTV-Signal  
Air  
Picture  
Audio  
Picture  
Audio  
Off  
Sleep Timer  
Advanced Video Menu  
Password Set  
Parental Control  
Digital Closed Caption  
Ntscc  
Auto Ch Search  
Add On Ch Search  
Manual Ch Set  
Channel Labels  
Menu Language  
Reset  
Setup  
Setup  
CC  
CC  
English  
Atscc  
Feature  
Feature  
Menu  
Enter  
Enter  
Menu  
To Exit  
To Move  
To Select  
To Exit  
To Move  
To Select  
The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides  
graphical presentation.  
Press CH+ to increase channel number.  
Press CH - to decrease channel number.  
You can select the channel number by pressing 0 to 9 or -/--.  
To select 1-digit channel (e.g. Channel 5): Press the 5 button.  
To select 2-digit channel (e.g. Channel 20): Press the -/-- button repeatedly to display -- then press 2, follow by 0.  
To select 3-digit channel (e.g. Channel 103): Press the -/-- button repeatedly to display -- then press 1, follow by 0,  
follow by 3.  
You can select the input source by pressing the INPUT on the remote control or on the front panel.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
Ch  
Video 1  
Video 2  
Video 3  
Video 4  
Video 5  
Video 6  
In this manual, the OSD ( On Screen Display) may be different from your TVs because it is just example to help the  
TV operation.  
Picture Mode  
Contrast  
User  
Picture  
Audio  
50  
50  
50  
50  
Brightness  
Sharpness  
Color  
1. Use  
/
to select what you want to adjust in the  
Picture menu.  
50  
Tint  
Setup  
Aspect Ratio  
Wide  
2. Press  
and  
button to adjust.  
3. When you are satisfied with your adjustment, press  
Feature  
Enter  
Menu  
To Exit  
To Move  
To Select  
MENU to exit the main menu.  
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE  
menu. You may select the picture mode directly by pressing the PMODE button on the remote control.  
Press  
Press  
/
button and then use  
button and then use  
/
to adjust the contrast of the picture.  
to adjust the brightness of the picture.  
/
/
Press  
/
button and then use  
/
to adjust the sharpness level of picture.  
Press  
Press  
/
/
button and then use  
button and then use  
/
/
to adjust the color saturation.  
to adjust the tint of picture.  
Press /to select the ratio of picture display such as Normal/ Zoom/ Wide and Cinema.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
Audio Mode  
Voice  
Picture  
Audio  
English  
Audio Language  
Bass  
30  
30  
0
Treble  
Balance  
1. Use  
/
to select what you want to adjust in the  
Audio menu.  
Digital Audio Output  
PCM  
Setup  
2. Press  
and  
button to adjust.  
3. When you are satisfied with your adjustment, press  
Feature  
MENU or EXIT to exit the main menu.  
Enter  
Menu  
To Exit  
To Move  
To Select  
You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND  
menu. You may select the sound mode directly by pressing the SMODE button on the remote control.  
Press / to select one of the audio language such as English/ French and Spain, but the condition is that the program  
system has included the language code.  
Press  
Press  
Press  
/
/
/
button and then use  
button and then use  
button and then use  
/
/
/
to increase or decrease the level of the lower-pitched sounds.  
to increase or decrease the level of the higher-pitched sounds.  
to adjust the audio output between left and right speakers.  
Press / to select the one of mode of the digital audio output such as PCM and RAW.  
Tuning Band  
Air  
Picture  
Audio  
DTV-Signal  
Auto Ch Search  
Add On Ch Search  
Manual Ch Set  
1. Use  
/
to select what you want to adjust in the  
Channel Labels  
Menu Language  
Reset  
Setup menu.  
Setup  
English  
2. Press  
and  
button to adjust.  
3. When you are satisfied with your adjustment, press  
Feature  
Enter  
Menu  
To Exit  
To Move  
To Select  
MENU to exit the main menu.  
Press Enter key to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.  
In DTV mode, you can tune manually and adjust the angle, orientation of the antenna etc  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
Press / key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press Enter key to enter  
your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically  
saved as below:  
Autoprogram Menu  
NTSC Channel 19  
Not Found  
2
0
Analog Channels Found  
Digital Channels Found  
Progress(%)  
12  
When the channels are found, use  
/
to add it to the channel list.  
Press Enter button to display a channel list that you can select channel as below:  
Manual Channel Set Menu  
Ch 42 -1  
ATSCdmo  
Viewable  
Ch 2 -0  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Ch 11 -0  
Ch 22 -0  
Ch 31 -0  
Ch 52 -0  
Ch 54 -0  
Ch 66 -0  
Ch 68 -0  
Enter  
M enu  
To Exit  
To Move  
To Select  
Allows you to name the channel that is selected. Use / to move the cursor and use /to input the name and then  
press Menu or Enter to return or exit as following:  
Channel Labels Menu  
Ch 42-1  
To Move  
ATSC dmo  
Enter  
Me nu  
To Change  
To Exit  
To select language of the OSD such as English/ French and Spain  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
Time Set  
Picture  
Audio  
Off  
Sleep Timer  
Advanced Video Menu  
Password Set  
1. Use  
/
to select what you want to adjust in the  
Parental Control  
Digital Closed Caption  
Feature menu.  
Setup  
2. Press  
and  
button to adjust.  
3. When you are satisfied with your adjustment, press  
Feature  
MENU to exit the main menu.  
Enter  
Menu  
To Exit  
To Move  
To Select  
Press  
/
button and then use Enter the time set menu as below that allows you to set the time the TV will display.  
Time Set Menu  
Time Set Mode  
Auto  
Time Zone  
Year  
Pacific  
2006  
Date  
Dec 29  
12:00 AM  
Time  
Enter  
Me nu  
To Exit  
To Move  
To Select  
You can select one of auto and manual to set the time.  
When selected auto, the item of year/date and time will be  
disabled and can not to adjust. When select the manual  
mode, you can press /and /to set the corresponding  
functions.  
Press /to select the time zone such as Pacific/ Alaska/  
Hawaii/ Eastern/ Central/Mountain.  
Press /to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min  
/60min/90min and OFF.  
Press Enter to enter the advance video menu as below:  
Advance Video Menu  
Noise Reduction--Spatial  
Off  
Noise Reduction-- Speckle  
Noise Reduction-- Temporal  
Color Temperature  
3D Y/C  
Off  
Off  
Normal  
On  
Adaptive Contrast  
Setting  
On  
Preset  
Ent er  
M enu  
To Exit  
To Move  
To Select  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
- Noise Reduction--Spatial: press Enter to select on or off.  
- Noise Reduction--Speckle: press Enter to select on or off.  
- Noise Reduction--Temporal: press Enter to select on or off.  
- Auto Contrast Enhancement: press Enter to select on or off.  
- Color Temperature: press Enter to select one of Normal/Cool  
and Warm.  
- 3D Y/C: press Enter to select on or off.  
- Adaptive Contrast: press Enter to select on or off.  
- Setting: press Enter to return to the factory setting.  
Press Enter to enter the Enter Old Password menu, and then input the number of 0-9 as below, and you can change the  
password when you input the new one twice.  
Enter Old Password  
Press Enter to enter the sub-menu and then uses the 0-9 to enter the correct password.  
Candlan Rating Menu  
Candlan English  
Candlan French  
E
C
E
G
C8+  
G
8 ans+  
13 ans+  
16 ans+  
18 ans+  
PG  
14+  
18+  
Enter  
Menu  
To Exit  
To Move  
To Select  
This item allows you to set the closed caption, and press Enter to enter Closed Caption Options menu as below:  
Digital Closed Caption  
Style  
Automatic  
Automatic  
Automatic  
Size  
Font  
Text Color  
Automatic  
Automatic  
Automatic  
Automatic  
Automatic  
Automatic  
Text Opacity  
Background Color  
Background Opacity  
Edge Effect  
Edge Color  
DECIDED BY BROADCASTING  
Ent er  
M enu  
To Exit  
To Move  
To Select  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
- Style: press Enter to select one of Automatic and Custom, when you select automatic, the others are disable and can not be  
adjusted.  
- Size: press Enter to select one of Normal/Large and Small.  
- Font: press Enter to select one of Default and from Font1 to Font7.  
- Text Color: press Enter to select one of Red/Green/Blue/Yellow/Magenta/Cyan/Black and White.  
- Text Opacity: press Enter to select one of the Solid/Flashing/Transparent/Translucent.  
- Background Color: press Enter to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.  
- Background Opacity: press Enter to select one of the Solid/Flashing/Transparent/Translucent.  
- Edge Effect press Enter to select one of the None/Raised/Depressed/Uniform/Left Shadow/Right Shadow.  
- Edge Color press Enter to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.  
Time Set  
Picture  
Sleep Timer  
Off  
Advanced Video Menu  
VGA Set  
Audio  
1. Use  
/
to select what you want to adjust in the  
Feature menu.  
Setup  
2. Press  
and  
button to adjust.  
Feature  
3. When you are satisfied with your adjustment, press  
Enter  
Menu  
To Exit  
To Move  
To Select  
MENU to exit the main menu.  
Press  
/
button and then use Enter to enter the VGA set menu as below:  
VGA Setting-1024x768@70Hz  
H-Pos  
50  
50  
V-Pos  
50  
50  
Clock  
Phase  
Auto Adjust  
Preset  
Setting  
Enter  
Menu  
To Move  
To Select  
To Exit  
Press  
Press  
Press  
/
button and then use  
button and then use  
button and then use  
/
/
adjust the horizontal position of the picture.  
adjust the vertical position of the picture.  
to adjust the phase of the picture.  
/
/
/
Press  
/
button and then use  
/
to adjust the clock of the picture.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
-Phase  
-Clock  
This function allows you to remove any horizontal  
noise and clear or sharpen the image of characters  
This function is to minimize any vertical bars or stripes  
visible on the screen background. And the horizontal  
screen size also will change.  
-Position This function is to adjust the picture to Left/Right  
and Up/Down as you prefer..  
Press  
/
button and then use  
/
to do auto adjust that automatically adjusts the available options for the best viewing  
configuration.  
Press Enter to do preset that can return to the factory setting.  
Time Set  
Picture  
Off  
Sleep Timer  
Advanced Video Menu  
Component Set  
Audio  
1. Use  
/
to select what you want to adjust in the  
Feature menu.  
Setup  
2. Press  
and  
button to adjust.  
3. When you are satisfied with your adjustment, press  
Feature  
MENU to exit the main menu.  
Enter  
M enu  
To Exit  
To Move  
To Select  
Press  
/
button and then use Enter to enter the VGA set menu as below:  
Component Setting-720x480I@30/29.97Hz  
H-Pos  
50  
50  
50  
50  
V-Pos  
Clock  
Phase  
Auto Adjust  
Preset  
Setting  
Enter  
M enu  
To Exit  
To Move  
To Select  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
Time Set  
Picture  
Audio  
Sleep Timer  
Off  
Advanced Video Menu  
Setup  
Feature  
Enter  
Menu  
To Exit  
To Move  
To Select  
Press  
/
button and then use Enter the time set menu as below that allows you to set the time the TV will display.  
Press /to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min  
/60min/90min and OFF.  
Press Enter to enter the advance video menu.  
Advanced Video Menu  
On  
Noise Reduction --Spatial  
On  
Noise Reduction --Speckle  
On  
Noise Reduction --Temporal  
Color Temperature  
Normal  
3D Y/C  
On  
Menu  
To Exit  
To Move  
To Change  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
Remote control instructions  
Switch on LCD TV when at standby mode or vice  
versa.  
MTS  
Press to mute the sound. Press again or press  
VOL+ to unmute.  
Press to cycle through the input source in following:  
Ch  
Video1  
Video3  
Video6  
Video4  
Video5  
Video2  
MENU  
CCD  
EXIT  
DISPLAY  
Press repeatedly to cycle through the available video  
picture modes.  
Press to cycle through the different sound settings.  
Audio selection button.  
VOL  
CH  
Lets you select amount of time before your TV turn  
itself off automatically.  
VOL  
CH  
DVD SETUP  
ZOOM  
EPG  
D.  
DISPLAY  
Press 0-9 to select a TV channel directly when you  
are watching TV. The channel change after 2 seco-  
nds.  
-/--  
Press this button to enter a program number for  
multiple program channel such as 2-1,etc.  
Return to the previous channel viewed.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Brings up the main menu to the screen.  
Closed caption button.  
MTS  
Clears all on-screen displays and returns to TV  
viewing from any menu.  
Press to display the source and channels info-  
rmation.  
MENU  
CCD  
EXIT  
DISPLAY  
Allows you to navigate the on-screen menus and  
adjust the system settings to your preference.  
Press to scan through channels. To scan quickly  
channels, press and hold down either +/-button.  
VOL  
CH  
VOL  
CH  
Press to increase / decrease the sound level.  
DVD SETUP  
ZOOM  
EPG  
D.  
DISPLAY  
DVD ZOOM.  
Display Electronic Program Guide.  
DVD DISPLAY  
To display subtitle in DVD mode.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MTS  
PLAY/PAUSE  
Fast backward key.  
Fast forward key.  
MENU  
CCD  
EXIT  
DISPLAY  
Jump to previous track.  
Jump to next track.  
DVD THUMB STICK/OK.  
DVD STOP  
VOL  
CH  
VOL  
CH  
DVD SETUP  
ZOOM  
EPG  
D.  
DISPLAY  
OPEN/CLOSE  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Usage Caution  
a)Open the cover  
b)AA size batteries, When inserting the batteries, make sure correct polarities as per+and -marks  
on the batteries and within the battery compartment  
c)Replace the battery cover  
To prevent battery leakage which may result in bodily injury or damage to the remote:  
1.Install all batteries correctly, and as marked on the remote control.  
2.Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc)  
Remove batteries when the remote is not used for a long time.  
ACCESSORIES  
1 Adapter Plug  
2 One Remote Control  
3 2 Batteries 1.5V  
4 One User Manual  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE DVD SETUP MENU SYSTEM  
8.1 Basic Operation  
1. Press TV/DVD button on the remote controller or DVD button on the TV set to turn on ( or off )  
DVD .  
2. Press OPEN / CLOSE button to load disc into disc tray.  
3. Press OPEN / CLOSE button to close the tray.  
Hold the disc without touching either of its surfaces, position it with the printed title side facing up,  
align it with the guides, and place it in its proper position.  
8.2 DVD Setup Mode  
·Setup Mode provides the menu for the configuration of General Setup Page, Speaker Setup Page,  
Dolby DigitalSetup ,Video Setup Page and Preference Page .  
·Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP button and the  
OK button.  
·Press the SETUP button first , enter into SETUP menu, then press the DIRECTION RIGHT button,  
you can enter into the next Sub-menu.  
·Press the SETUP button again to exit the Setup Menu.  
8.2.1 General Setup  
TV Display  
·PS  
This is selected when the DVD player is connected to a normal TV. Wide-screen images are shown  
on the screen, but with some parts cut automatically.  
·LB  
This is selected when the player is connected to a normal TV. Wide-screen images are shown on the  
screen, with black belt on the top and bottom.  
·Wide  
This is selected when the player is connected to a wide-screen TV.  
Angle Mark  
This only works when there is an angle mark on the disc. Select ON, the screen shows the mark  
when playing DVD.  
·ON  
·OFF  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Language  
This is used to select the OSD language.  
·English  
·French  
·Spanish  
Screen Saver  
Start the screen saver, the screen saver image will appear when the player stops or the picture is  
frozen for a few minutes. This saver can keep the screen from being damaged.  
·On (Start the screen saver)  
·Off (Remove the screen saver).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.2.2 Speaker Setup Page  
Downmix  
·LT/RT  
A disc recorded multi channel soundtrack, the output signal will be incorporated to left and right  
channel.  
·Stereo  
A disc recorded multi channel soundtrack, The output signal will be incorporated to stereo.  
8.2.3 Dolby Digital Setup  
Dual Mono  
This is used to select the Stereo, L-MONO, R-MONO and MIX-MONO.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic  
This option is used to set the compression ratio in order to control the sound (Vume) contrast.  
8.2.4 Video Setup  
Sharpness  
This option is used to set the sharpness level of the sharpness of the video output  
·High  
·Medium  
·Low  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Brightness  
User can set the level of brightness for the image displayed. is ranged from -20 to 20.  
Contrast  
User can set the level of contrast for the image displayed. It is ranged from -16 to 16.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.2.5 Preference Setup  
You must press STOP twice to enter Preference Page  
TV Type  
·PAL  
This is selected when the player is connected to an PAL System TV.  
·MULTI  
The player will set the TV system according to the disc in the tray.  
·NTSC  
This is selected when the player is connected to a NTSC System TV.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio  
If a language listed below is recorded on the disc, you can play the sound in such language.  
If not, the language recorded will be used.  
·English  
·French  
·Spanish  
·Chinese  
·Japanese  
·German  
·Duch  
·Italian  
Subtitle  
If a language listed below is recorded on the disc, you set the subtitle to be displayed in such language.  
If not, the language recorded will be used.  
·English  
·French  
·Spanish  
·Chinese  
·Japanese  
·German  
·Duch  
·Italian  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Menu  
If a language listed below is record on the disc, you can set the Menu to be displayed in such  
language. If not, the language recorded will be used.  
·English  
·French  
·Spanish  
·Chinese  
·Japanese  
·German  
·Duch  
·Italian  
Parental  
When playing disc with parental lock function, you may select an Age Control Grade according to  
grade of disc and your own preference. For example, if PG is selected, DVD Video disc rated higher  
than the PG grade cannot be played.  
·KID SAFE  
·G  
·PG  
·PG 13  
·P GR  
·R  
·NC 17  
·ADULT  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Password  
User can change the password that is required when the user wants to change the Age Control  
Grade in the Parental Lock function.  
NOTE:(Default password is 3308 )  
Default  
User can load the original factory setting by choose RESET and press OK button .  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING AND ADVICE  
Before calling our SAS centre, please check if you can solve the troubleshooting by yourself.  
Troubleshooting  
No signal  
Control  
Please check that all cables and cord's are correctly plugged in.  
Adjust the contrast, the color and the brightness  
No color shades  
May be result from a lighting signal from car, motor, neon light and  
other electrical devices or appliances.  
Stain show on the  
screen.  
Double or multiple  
display image  
May be the result of an electrical wave disturb from other TV,  
Computer and Game machine or Radio  
The cables of the antenna are not correctly plugged in.  
Snow on the screen  
The remote control  
does not work  
Please check the batteries order and alignment.Check that the IR  
of the remote control is not hidden by something.  
Even if the display image is correct, the noise may come from an  
unsteady fixation of the panel.  
"Zip" made noise on  
TV cover  
Make sure that you have not press the MUTE button of the panel  
or of the remote control.  
No sound  
No DVD  
Make sure if the TV Set have been switched to DVD mode  
Ensure disc is correctly inserted into the player. Ensure  
the disc does not damaged and with correct format.  
Please wait patiently as some discs need longer time to play.  
DVD player not  
working properly  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Screen Size  
19 Inch  
Display Type  
TFT LCD  
Resolution(Pixel)  
Brightness  
1440 * 900  
400cd/  
16.2M  
Color  
500 : 1  
Contrast Ratio  
View Angle(H/V)  
Aspect Ratio  
160 /135  
16:10  
110V/120V Voltage Selectable  
NTSC  
AC INPUT  
TV System  
Video Input Format  
Antenna Input  
Audio Output  
NTSC  
Standard antenna socket 75  
L / R 10W*2  
Ω
Video 1.0vp  
Y:1.0Vp-p±3db C:0.3Vp-p±3db  
640*480/60Hz 800*600/60Hz 1024*768/60Hz  
L200mVrms max3 0vp 20 kRCA  
-p75Ω;RCA  
Video  
S-Video  
Input  
PC  
Audio  
(Videos-Video-PC)  
R
/
(
.
-
p
)
Ω
Disc Physical Format  
DVD Video Output Format  
Video Decompression  
Weight  
DVD/CD/VCD/MP3/JPEG/CD-R/CD-RW  
NTSC  
MPEG-2 (ISO/IEC-13818),MPEG-1,JPEG  
13.4 lbs  
Dimensions (with stand)  
19.5 W x 16.8 H x 2.8 D  
This manual is only for your reference, any change to the design and specification will not  
be advised.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Rangemaster Cooktop RI77 User Guide
RCA DVD VCR Combo DRC8300N User Guide
Regency Indoor Fireplace P121 P131 LP2 User Guide
Renesas Network Card M34282T5 OPT User Guide
Robic Outdoor Timer SC 501 User Guide
Rotel Power Supply RB 951 MkII User Guide
RoyalTek GPS Receiver REB 3300 User Guide
Ryobi Grinder AG402 User Guide
Samsung Bluetooth Headset GH68 xxxxxA User Guide
Sears Refrigerator 46 51032 User Guide