DESCRIPTION
Catalog #
Project
Type
Date
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FIVE (5) 12V MR16 lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Comments
Prepared by
SPECIFICATION FEATURES
A... Housing
D... Electrical
+ hex louver + snoot). 45º x 45º locking
Housing and junction box are aluminum,
Integral electronic or magnetic low voltage lamp adjustment. Beveled-edge lamp
COMBOLIGHT®
Next Generation
Recessed
trim assembly is steel with powder coated transformers. Transformers and electrical
ring is secured with threadless, bayonet
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
are mounted in a separate metal enclosure action. Optional retractable arm is avail-
box attached to the junction box with 18” able for lamp pulldown and extreme
of flexible conduit. Transformer enclosure
aiming.
the inner hardware of the fixture from sight includes a separated wiring compart-
Multi-Lamp Fixture
below the ceiling. Can accommodate
various ceiling thickness.
ment and six knockouts for conduit entry. F ... Mounting
Transformer enclosure features perforated A mounting frame is provided which
metal door for easy maintenance access
and cooler operation. Entire electrical
inserts into the ceiling opening. The
housing is then pushed through the
B... System Protection:
Five (5) Light
12V MR16
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
assembly (jbox and transformer enclosure) mounting frame and secured with
is removable from the housing for easy
maintenance.
screws.
G... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
E ... Lamps
Five (5) 12V MR16 lamps mounted in
Remodel Housing
w/ 0.75” Trim Flange
C... Junction Box
Junction Box is UL listed for through branch adjustable double gimbal. Lamp holders
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
are removable and may be regressed 1”
for additional cut-off. Lamps can accept
Ceiling Cut-Out: 5.13” x 20.47”
listed as ‘access above ceiling not required’. up to three optical accessories (i.e. lens
Double
Gimbal
8.50”
22.17”
45º x 45º
Adjust
6.25”
1.60”
5.38”
20.88”
5.75”
Required
above
20.20”
19.38”
ceiling
16.83”
3.88”
Integral Low Voltage Transformers
Separate Wiring Compartment
6.50”
3.88”
Thermal
Protector
18” flexible conduit
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
71W magnetic transformers are remote and sold separately.
ORDERING INFORMATION
C5
R
T
Configuration
Lamp Type / Wattage Label
Power Supply
Voltage
1
2
Lamp Mechanism
Trim Finish
C5 = COMBOLIGHT
Recessed Five (5) Light
037M16 = 37 Watt max. MR16 12V
042M16 = 42 Watt max. MR16 12V
050M16 = 50 Watt max. MR16 12V
071M16 = 71 Watt max. MR16 12V
G = Double Gimbal
W = White
= 120V
= 277V
= Retractable Double Gimbal
B
S
= Black
R
= Industrial Silver
Housing
Power Supply
Trim Flange
T = 0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
R = Remodel
E = Electronic Low Voltage
Transformer
Finish
W = White
M = Magnetic Low Voltage
Transformer
B
S
= Black
= Industrial Silver
rev 121107
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Download from Www.Somanuals.com. All Manuals Search And Download.
|