VR688HF
USER’S
GUIDE
VIDEO CASSETTE RECORDER
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Table of Contents
Using the Playback Features
Important Information
Tape Playback: HI-FI/LINEAR/
Warnings______________________________ i
Cautions ______________________________ i
Note to Cable TV Installer _______________ i
Product Registration ____________________ i
MIX Feature ____________________ 27
Auto Play Feature _________________ 28
Auto Repeat Feature_______________ 28
Pause for Stop-Action______________ 29
Picture Search ____________________ 29
Frame Advance ___________________ 30
Slow Motion______________________ 30
Automatic Tracking _______________ 31
Manual Tracking__________________ 31
Pro-Tect PlusTM Locking Feature _____ 31
Index Search _____________________ 32
Go-To Search _____________________ 33
Blank Search _____________________ 33
DISPLAY Button __________________ 34
Program Information ______________ 35
Time Counter_____________________ 35
Hooking Up the VCR
Choosing a Hookup ____________________ 2
Antenna or Cable System Without a
Cable Box _________________________ 3
Cable System With Cable Box to
Unscramble All Channels ___________ 4
Cable System With Cable Box to
Unscramble Pay Channels___________ 5
Satellite Receiver _____________________ 6-7
Connecting Two VCRs for Copying Tapes_ 8
Setting Up the VCR
Startup
Check Accessories With VCR ________ 9
Attach Power Cord to Back of VCR ___ 9
Insert Batteries in Remote ___________ 9
Turn on the TV ___________________ 10
Use the On-Screen Menu System ____ 10
Turn on the VCR__________________ 10
RCA Digital Satellite Receiver and
Cable Box Setup _____________ 11-13
Manual Cable Box or RCA
Satellite Receiver Setup _______ 13
Use SETUP Menu to Auto Channel
Search and Auto Clock Set________ 14
Manual Clock Set________________ 15
Setup VCR Plus+ Channels ________ 16
Program VCR for VCR1 or
COMMERCIAL ADVANCE™
Feature
Recording and Playback_________ 36-37
Recording a Program
Types of Recordings___________________ 38
Using the Recording Features
Recording Speeds _________________ 38
Recording Pause __________________ 38
Basic Recording Ð
Operating Instructions_____________ 39
Watch a TV Channel While VCR
is Recording a Different Channel ____ 39
Recording While You're Away
VCR Plus+ Recording ___________ 40-42
Timer Recording __________________ 43
Check, Edit, or Clear a VCR Plus+ or
Timer Recording _______________ 44
Timer Recording From the
VCR2•DVD Button ______________ 16
Add or Remove Channels from
VCR's Memory__________________ 17
Auto Channel Search Using
VCRÕs Line Input _______________ 44
Express Recording (XPR)_______________ 45
Recording Broadcast Stereo TV or SAP___ 46
Recording Audio Only_________________ 47
Using Two VCRs for Copying
the CHANNELS Menu _________ 17
Select the Language/Choisissez une
Langue ________________________ 18
Use TV•VCR Button _______________ 18
Set the Auto TV/VCR Feature _______ 19
and Editing Tapes__________________ 48
Using Dual Remote with AutoEdit ___ 48
Using the Remote Control
Component, VCR, TV, Cable Box, and
Satellite Receiver Buttons________ 20-21
Using the VCR2•DVD Button ___________ 22
Controlling the VCR ________________ 22
Controlling a LaserDisc Player or
References
Location of Controls
Front Panel_______________________ 49
Back Panel _______________________ 50
Display Panel __________________ 50-51
Specifications_________________________ 52
Cleaning the VCR _____________________ 52
Limited Warranty _____________________ 53
Trouble Checks ____________________ 54-56
Questions and Answers About
DVD Component_________________ 22
Controlling a TV ______________________ 23
Controlling a Cable Box or
Satellite Receiver_______________________ 24
Controlling an Auxiliary RCA Component _ 25
Playing a Tape
COMMERCIAL ADVANCEª_____ 57
Index _____________________________ 58-61
Operating Instructions_________________ 26
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Choosing a Hookup
The hookups on pages 3 through 7 are divided into two hookup types: Basic (A) and
Advanced (B and C).
The basic hookup shows the backs of TVs that have only an antenna/cable connection.
It is the easier of the two and additional accessories may not be needed.
The advanced hookup shows the VCR hooked up to a monitor/receiver
(TV with audio and video jacks). This connection may improve the picture quality as
well as convenience of operation.
Answer the questions to choose the hookup for your VCR.
1. How do you receive your TV signals?
Choose one answer from below.
A. Outside antenna Ð Turn to page 3.
B. Rabbit ears (set-top) and/or bow tie antenna Ð Turn to page 3.
C. Cable System Ð Go to question 2.
D. Satellite System and another source (A, B, C) Ð Go to question 3.
2. What type of Cable-TV system* do you have?
Choose one answer from below.
A. Cable without a box Ð Turn to page 3.
B. Cable box to unscramble all the channels Ð Turn to page 4.
C. Cable box to unscramble only pay channels, such as HBO, Showtime,
Cinemax, etc. Ð Turn to page 5.
*You may need to contact your local cable company for assistance.
3. What type of satellite system do you have?
Choose one answer from below.
A. Satellite receiver connected to TV without audio/video inputs Ð
Turn to page 6.
B. Basic satellite receiver connected to TV with audio/video inputs Ð
Turn to page 7.
C. Deluxe satellite receiver connected to TV with audio/video inputs Ð
Turn to page 7.
Optional Hookups
How to hook up two VCRs for copying tapes?
A. Select a hookup by answering the questions above.
B. Then modify the connections as shown on page 8.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Antenna or Cable System Without a Cable Box
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Antenna
or Cable
300/75 Ohm
Adapter
Back of VCR
1. Set the CH3 CH4 switch on back of VCR
to either channel 3 or 4.
IN
MONO
L
FROM
ANTENNA
L
You will tune the TV to this channel and use the
OR
TV•VCR button to watch the VCR.
R
R
VIDEO
OUT
TO
TELEVISION
IN
OUT
IN
OUT
CH
3
4
AUDIO
2. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR and TV.
Continue to page 9.
4.
75 to 75/300 Ohm
Separator
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Use this hookup for slightly improved
picture quality, hi-fi stereo sound, and more
convenient operation Ñ use of TV•VCR
button not required.
From Antenna
or Cable
300/75 Ohm
Adapter
Back of VCR
1. Connect as shown.
This connection requires additional accessories
not provided.
IN
MONO
L
FROM
L
ANTENNA
OR
If your TV is not stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
R
R
VIDEO
OUT
IN
OUT
TO
IN
OUT
CH
TELEVISION
3
4
AUDIO
2. Plug in power cords of VCR and TV.
Audio/Video Cables
RF Coaxial Cable
(supplied)
Continue to page 9.
3.
VIDEO
INPUT
You will tune the TV to its video input to
watch the VCR.
RIGHT
Set the Auto TV/VCR feature to OFF. See
page 19.
OUT AUDIO
IN
S-VIDEO
CABLE /
ANTENNA
L /
MONO
Back of TV
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble All Channels
Position cable box.
Position the remote-controllable cable box on
top of the VCR. You may need to position it
Cable Box
at different angles before the VCR can
Transmitting
Remote Sensor
control it. Make sure the cable box does not
Windows
cover the transmitting window on top of the
VCR.
A
A. Basic hookup.
From Cable
Use this hookup for a simple connection
which requires fewer accessories.
RF Coaxial
Cable
Back of VCR
1. Set the CH3 CH4 switch on back of VCR
IN
OUT
IN
MONO
L
FROM
to either channel 3 or 4.
ANTENNA
L
Cable Box
You will tune the TV to this channel and use the
R
R
VIDEO
OUT
OUT
TO
TELEVISION
IN
IN
OUT
CH
TV•VCR button to watch the VCR.
3
4
AUDIO
2. Connect as shown.
RF Coaxial Cable
(supplied)
This connection may require additional
accessories not provided.
75 to 75/300 Ohm
Separator
3. Plug in power cords of VCR, TV, and
cable box.
VHF
UHF
Continue to page 9.
4.
OR
Cable/
Antenna
Back of TV
B
B. Advanced hookup.
Cable Box
Use this hookup for slightly improved
picture quality, hi-fi stereo sound, and more
convenient operation Ñ use of TV•VCR
button not required.
From Cable
IN
OUT
RF Coaxial
Cable
Back of VCR
1. Connect as shown.
IN
MONO
FROM
This connection requires additional accessories
not provided.
L
L
ANTENNA
R
R
VIDEO
IN
OUT
OUT
TO
TELEVISION
IN
OUT
CH
If your TV is not stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
3
4
AUDIO
Audio/Video Cables
RF Coaxial Cable
(supplied)
2. Plug in power cords of VCR, TV, and
VIDEO
INPUT
cable box.
Continue to page 9.
3.
RIGHT
OUT AUDIO
S-VIDEO
IN
You will tune the TV to its video input to
watch the VCR.
CABLE /
ANTENNA
L /
MONO
Set the Auto TV/VCR feature to OFF. See
page 19.
Back of TV
Caution: The unauthorized recording of
satellite broadcasts, television programs, or
other materials may infringe the rights of others.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble Pay Channels
(such as HBO, Showtime, Pay-Per-View, etc.)
Position cable box.
Position the remote-controllable cable box on
top of the VCR. You may need to position it
Cable Box
at different angles before the VCR can
Transmitting
Remote Sensor
control it. Make sure the cable box does not
Windows
cover the transmitting window on top of the
VCR.
A
A. Basic hookup.
Use this hookup for a simple connection
which requires fewer accessories.
From Cable
Back of VCR
RF Coaxial
Cable
Cable Box
1. Set the CH3 CH4 switch on back of VCR
IN
to either channel 3 or 4.
MONO
L
FROM
L
ANTENNA
IN
OUT
You will tune the TV to this channel and use the
R
R
VIDEO
OUT
IN
OUT
TO
TELEVISION
TV•VCR button to watch the VCR.
IN
OUT
CH
3
4
AUDIO
2. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR, TV, and
75 to 75/300 Ohm
Separator
cable box.
Continue to page 9.
4.
VHF
UHF
OR
Cable/
Antenna
Back of TV
B
B. Advanced hookup.
Cable Box
Use this hookup for slightly improved
picture quality, hi-fi stereo sound, and more
convenient operation Ñ use of TV•VCR
button not required.
From Cable
IN
OUT
Signal
Splitter
1. Connect as shown.
Back of VCR
This connection requires additional accessories
not provided.
IN
MONO
L
FROM
L
ANTENNA
If your TV is not stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
R
R
VIDEO
IN
OUT
OUT
TO
TELEVISION
IN
OUT
CH
3
4
AUDIO
2. Plug in power cords of VCR, TV, and
Audio/Video Cables
cable box.
VIDEO
INPUT
Continue to page 9.
RF Coaxial
Cable
3.
(supplied)
RIGHT
You will tune the TV to its video input to
watch the VCR. All pay channels are
viewed through the VCR.
OUT AUDIO
IN
S-VIDEO
CABLE /
ANTENNA
L /
MONO
Set the Auto TV/VCR feature to OFF. See
page 19.
Back of TV
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Satellite Receiver
Position receiver.
Position the receiver on top of the VCR. You
may need to position it at different angles
before the VCR can control it. Make sure the
receiver does not cover the transmitting
window on top of the VCR.
Do not stack electronic components or other
objects on top of the receiver. The slots on
top of the receiver must be
Satellite Receiver
left uncovered to allow proper airflow
to the unit. Blocking the airflow to the unit
could impair performance or damage your
receiver and other components. Also, do
not stack the receiver on top of a Òhot
componentÓ such as an audio power
amplifier.
Remote Sensor
Transmitting
Windows
A. Basic hookup.
A
From
Cable, Cable Box
or Antenna
From
Satellite
Dish
Use this hookup if your TV does not have
audio/video jacks.
Back of Satellite Receiver
1. Set the CH3 CH4 switch on back of
satellite receiver to either channel 3 or 4.
CH3
CH4
SATELLITE IN
You will tune the VCR to this channel or its line
IN FROM ANT
OUT TO TV
input (L1) to record from the receiver.
S-VIDEO
VIDEO
R
AUDIO
L
To watch the satellite receiver, turn off the VCR.
If you want to watch or record the signal from
your antenna, cable, or cable box, make sure the
satellite receiver is turned off.
RF Coaxial Cable
Audio/Video Cables
(supplied)
2. Set the CH3 CH4 switch on back of VCR
IN
MONO
L
FROM
to either channel 3 or 4.
L
ANTENNA
You will tune the TV to this channel and use the
R
R
VIDEO
IN
OUT
OUT
TO
TELEVISION
IN
OUT
TV•VCR button to watch the VCR.
CH
3
4
AUDIO
Back of VCR
3. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
4. Plug in power cords of VCR, TV, and
receiver.
75 to 75/300 Ohm
Separator
Continue to page 9.
5.
VHF
UHF
OR
Cable/
Antenna
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
Back of TV
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Satellite Receiver
From
Cable, Cable Box
or Antenna
From
Satellite
Dish
B. Advanced hookup with
basic receiver.
B
Use this hookup if your TV has audio/video
jacks and your receiver has one set of
AUDIO/VIDEO jacks.
Back of Satellite Receiver
CH3
CH4
SATELLITE IN
1. Set the CH3 CH4 switch on back of
IN FROM ANT
OUT TO TV
receiver to either channel 3 or 4.
S-VIDEO
VIDEO
R
AUDIO
L
You will tune the VCR to this channel to record
from the satellite receiver.
To watch the satellite receiver, tune your TV to
its video input channel.
RF Coaxial Cable
Back of VCR
If you want to watch or record the signal from
your antenna, cable, or cable box, make sure the
satellite receiver is turned off.
IN
MONO
FROM
L
L
ANTENNA
R
R
VIDEO
IN
OUT
OUT
TO
TELEVISION
2. Set the CH3 CH4 switch on back of VCR
IN
OUT
H
3
4
AUDIO
to either channel 3 or 4.
You will tune the TV to this channel and use the
Audio/Video Cables
(supplied)
TV•VCR button to watch the VCR.
VIDEO
INPUT
3. Connect as shown.
This connection may require additional
accessories not provided.
RIGHT
RF Coaxial Cable
(supplied)
4. Plug in power cords of VCR, TV, and
OUT AUDIO
S-VIDEO
IN
receiver.
CABLE /
ANTENNA
L /
MONO
Continue to page 9.
5.
Back of TV
From
Cable Box
or Antenna
From
Satellite
Dish
C
C. Advanced hookup with
deluxe receiver.
Use this hookup if your TV has audio/video
jacks and your receiver has two sets of
AUDIO/VIDEO jacks.
Back of Satellite Receiver
CH3
CH4
SATELLITE IN
IN FROM ANT
OUT TO TV
1. Set the CH3 CH4 switch on back of VCR
S-VIDEO
to either channel 3 or 4.
VIDEO
R
AUDIO
L
You will tune the TV to this channel and use the
TV•VCR button to watch the VCR.
To record from the satellite receiver, you will
tune the VCR to its line input (L1).
Audio/Video Cables
(supplied)
Back of VCR
To watch the satellite receiver, tune your TV to
its video input channel.
IN
MONO
FROM
L
L
ANTENNA
2. Connect as shown.
R
R
VIDEO
IN
OUT
OUT
TO
TELEVISION
This connection may require additional
accessories not provided.
IN
OUT
CH
4
AUDIO
Audio/Video Cables
3. Plug in power cords of VCR, TV, and
receiver.
VIDEO
INPUT
Continue to page 9.
4.
RIGHT
RF Coaxial Cable
(supplied)
OUT AUDIO
S-VIDEO
IN
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
CABLE /
ANTENNA
L /
MONO
Back of TV
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
A
Option A hookup.
Use this hookup for a simple connection which
requires fewer accessories.
Playback VCR
From Antenna, Cable
or Cable Box
1. Select a hookup from pages 2 through 7
IN
MONO
L
FROM
L
ANTENNA
and then modify with this connection.
R
R
VIDEO
OUT
IN
OUT
TO
TELEVISION
2. Set the CH3 CH4 switch on the playback
IN
OUT
CH
3
4
AUDIO
VCR to either channel 3 or 4.
You will tune the recording VCR to this channel
to receive the signal from the playback VCR.
RF Coaxial Cable
(supplied)
Recording VCR
3. Connect as shown.
This connection may require additional
accessories not provided.
IN
MONO
L
FROM
L
ANTENNA
4. Plug in power cords of VCRs and TV.
R
R
VIDEO
OUT
IN
OUT
TO
TELEVISION
OUT
CH
3
4
AUDIO
Continue to page 9.
5.
RF Coaxial
Cable
Audio/Video
Cables
or
Use the previously selected
hookup to the TV.
B
Option B hookup.
Use this hookup for slightly improved copy
quality, hi-fi stereo sound, and more convenient
operation Ñ use of TV•VCR button not required.
Playback VCR
IN
MONO
L
FROM
L
ANTENNA
1. Select a hookup from pages 2 through 7
and then modify with this connection.
R
R
VIDEO
IN
OUT
OUT
TO
OUT
CH
TELEVISION
3
4
AUDIO
2. Connect as shown.
This connection requires additional accessories
not provided.
Recording
VCR
Audio/Video
Cables
If your other VCR is not stereo, plug it into the
AUDIO L MONO jack of this VCR to hear sound
from both left and right channels.
From Antenna, Cable
or Cable Box
IN
MONO
L
FROM
L
ANTENNA
3. Plug in power cords of VCRs and TV.
R
R
VIDEO
IN
OUT
OUT
Continue to page 9.
4.
TO
IN
OUT
CH
TELEVISION
3
4
AUDIO
You will select the line (audio/video)
input on the recording VCR to receive the
signal from the playback VCR.
RF Coaxial
Cable
Audio/Video
Cables
or
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
Use the previously selected
hookup to the TV.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
1. Check accessories with VCR.
Contact your dealer if any items are missing.
R
S
1
VCR•DVD AUX
PWR
REW
TV
2
PLAY
STOP
FF
REC
PAUSE
4 “AAA” Batteries
SEARCH
DISPLAY
RF Coaxial Cable
(Stock No. 221396)
A
MUTE
PREV CH
1
2
5
8
3
4
7
6
9
INPUT
TV•VCR
0
•
CLEAR
SPEED
M
C
EDIT
F.ADV
e
MOVE
+
SLOW
_
TRACKING
Power Cord
(Stock No. 218104)
Remote
(Stock No. 231544)
2. Attach power cord to back of VCR.
1st
2nd
3. Insert batteries in remote.
9
continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
4. Turn on the TV.
A. Turn on the TV.
B. If you used one of the basic hookups, tune the TV to the
channel selected with the CH3 CH4 switch on back of VCR.
If you used one of the advanced hookups, tune the TV to the
TVÕs video input. (See TV ownerÕs manual for details.)
5. Use the on-screen menu system.
Point and Select is the method you use to move through the menu
system. There are two ways to select (or change) a menu or
feature.
1
4
7
2
3
6
9
¥
Using the Number Buttons: Press MENU•PROG to display
the VCR MAIN MENU. Then use the number button on the
remote that corresponds to the number on the menu to select
(or change) an item. Using the number button allows you to
point and select a menu item at the same time.
5
8
0
¥
Using the MOVE Arrow buttons: Press MENU•PROG to
•
display the VCR MAIN MENU. Then use the MOVE
or
M
arrow button to point to a menu or item. Press MENU•PROG
to select (or change) the item.
Although there are two ways to access the menu system, only
the number buttons are referenced throughout this manual to
explain the VCR features and operations.
MOVE
6. Turn on the VCR.
A. Press VCR1 on the remote.
Setup Menu Appears Automatically
The first time you turn on the VCR, the SETUP menu will
appear. Follow the steps on the screen to automatically
setup a satellite receiver or cable box, auto channel search,
automatically set the time, and select some feature options.
SETUP
The setup procedure
will help you configure
your VCR. Would you
like to begin the
setup procedure now?
1. Press number button 1 on the remote to Begin setup.
Proceed to Step 7.
1 Begin setup
2 Cancel
2. Press number button 2 on the remote to Cancel the
setup.
If you choose not to use the SETUP menu, follow the
steps in this section to manually set up the VCR so it
will operate properly.
If you skip auto channel search during setup, the auto
clock set feature will not be performed in this sequence.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
Select SETUP Menu Using VCR MAIN MENU
4 Channels
5 Setup
If the SETUP menu does not appear, you can select it using
the VCR MAIN MENU. Each of these features (except the
automatic clock set) may also be performed individually.
SETUP
To select the SETUP menu.
The setup procedure
will help you configure
your VCR. Would you
like to begin the
1. Press MENU•PROG to display the VCR MAIN MENU.
2. Press 5 to display the SETUP menu.
setup procedure now?
1 Begin setup
2 Cancel
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
7. RCA digital satellite receiver and/or cable box setup.
The DSS and cable box setups allow the VCR to record
programs from the cable box and/or RCA digital receiver.
¥
The VCR will turn on an RCA digital satellite receiver
and tune it to the channel you want to record during
timer recordings. Position the receiver above the VCR to
receive the infrared remote signal. See pages 6-7.
¥
If your cable box can be controlled by a remote, the VCR
may be able to tune it to the channel you want to record
during VCR Plus+ and timer recordings and
automatically set the clock after power failures. Position
the remote-controllable cable box on top of the VCR to
receive the infrared remote signal. See pages 4-5.
RCA Digital Receiver Setup
A. RCA digital receiver not used:
Press 2. You are finished with DSS SETUP.
SETUP
Would you like to set
up the VCR to control
a DSS receiver?
RCA digital receiver used:
Press 1 to continue.
B. Press two numbers on the remote to enter the channel
that your VCR receives signals from the receiver.
Press 0 before a single-digit number. Valid numbers
are 02 – 69.
1 Yes
2 No
DSS SETUP
If you connected your receiver to the VCR using the
receiverÕs AUDIO/VIDEO OUT jacks, press INPUT to
select VIDEO1 or VIDEO2.
On what ANTENNA channel
does the VCR receive
signals from the DSS
receiver?
--
Press CLEAR on the remote to correct an entry.
Press 02-69 or INPUT
Press MENU to exit
C. Press MENU•PROG to proceed.
The VCR will now receive all signals from the DSS
receiver on – – message appears.
D. Press MENU•PROG to proceed.
RCA digital receiver turned on:
The receiver should turn on and tune to channel 200.
Press 1 and proceed to step E.
Did the DSS receiver
turn on and tune to
channel 200?
The VCR will now turn on and tune your receiver to the
correct channel during timer recordings. – – – DSS will
appear for channels 100 and over in the timer program
screen.
1 YES, setup complete
2 NO, try again
3 NO, cancel setup
DSS SETUP
RCA digital receiver did not turn on:
If your receiver does not turn on, try repositioning the
receiver and press 2 to try again.
The VCR will now
receive all signals
from the DSS receiver
on ANTENNA channel 03
(or CABLE CHANNEL 03).
Cancel RCA digital receiver :
Press 3 to cancel DSS SETUP. The VCR will not turn on
or control the receiver.
Press MENU to proceed
continued on next page
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
7. RCA digital satellite receiver and/or cable box setup. (continued)
Cable Box Setup
E. Setup the VCR to control a cable box:
SETUP
Press 1 if you would like to setup the VCR to
control a cable box.
Would you like to set
up the VCR to control
a cable box?
Press 2 if you do not want to setup the VCR to
control a cable box.
1 Yes
2 No
F. Cable box not used for all channels:
Press 2. You are finished with CABLE BOX
SETUP. Skip to Step 8.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels?
Cable box used for all channels:
Press 1 to continue.
Press two numbers on the remote to enter the
channel that your VCR receives signals from
your cable box. Press 0 before a single-digit
number. Valid numbers are 01 – 13.
1 Yes
2 No
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box
If you connected your cable box to the VCR
using the boxÕs AUDIO/VIDEO OUT jacks, press
INPUT to select VIDEO1 or VIDEO2.
(usually 3, 4, or video)
--
Press CLEAR on the remote to correct an entry.
Press 01-13 or INPUT
Press MENU to exit
G. Press MENU•PROG to proceed.
CABLE BOX SETUP
The VCR will now receive all signals from the
The VCR will now
receive all signals
from the cable box
on channel 03
cable box on channel – – message appears.
H. Press MENU•PROG to proceed.
I. Manually Controlled Cable Box: You are
finished with cable box setup. Press
Press MENU to proceed
CABLE BOX SETUP
MENU•PROG to exit. Proceed to Step 8.
Remote Controlled Cable Box: Enter your
cable box code from the chart on the next page
and follow the on-screen directions. The VCR
changes the cable box from channel 02 to
channel 09 when you enter the correct code for
your cable box.
Enter the code for your
cable box from the
list in your User's
Manual.
--
Press MENU to exit
CABLE BOX SETUP
If none of the codes work, try repositioning the
cable box and entering the codes again. If the
codes still do not work, this VCR cannot
control your cable box during VCR plus+ or
timer recordings. Press MENU•PROG to exit
the CABLE BOX SETUP. Proceed to Step 8.
Please turn on the
cable box and tune
it to channel 2.
Press MENU to proceed
CABLE BOX SETUP
Did the cable box
tune to channel 9?
1 YES, setup is complete
2 NO, try again
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
7. RCA digital satellite receiver and/or cable box setup. (continued)
Compatible Cable Box Control Codes
Brand of Cable-TV Box*
ABC
Code Number(s)
53,54
07, 08
07, 08
07,08
02
Anvision
Cablestar
Eagle
Eastern International
General Instrument
Hamlin
04, 05, 15, 23, 24, 25, 30, 36
12, 13, 34,48
Hitachi
37, 43
Jerrold
04, 05, 15, 23, 24, 25, 30, 36, 45, 46,47
Macom
37, 43
Magnavox
NSC
07, 08, 19, 26, 28, 29, 32, 33, 40, 41
09
Oak
01, 16, 38
Oak Sigma
Panasonic
Philips
16
03, 27, 39
07, 08, 19, 26, 28, 29, 32, 33, 40, 41
Pioneer
18, 20, 44
Randtek
07, 08
RCA
00, 27
Regal
12, 13
Regency
02, 33
Samsung
Scientific Atlanta
Sylvania
Teknika
44
03, 22, 35
11
06
Texscan
10, 11
Tocom
17, 21,49, 50
Unika
31, 32, 41
Universal
Viewstar
Warner Amex
Zenith
51, 52
07, 08, 19, 26, 28, 29, 32, 33, 40, 41
44
14, 42
* The remote may not be able to control every model cable box of the
brands listed.
Manual cable box or RCA digital satellite
receiver setup.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
If you ever want to individually set up the cable box or
satellite receiver:
A. Press MENU•PROG to display the VCR MAIN MENU
on the TV screen.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
B. Press 4 to select CHANNELS menu.
C. Select Cable box or DSS Setup.
3 Signal Type:
CABLE
4 VCR Plus+ Channel List
5 Cable box Setup
6 DSS Setup
¥ Press 5 to select Cable box Setup.
¥ Press 6 to select DSS Setup.
0 Exit
D. Follow the directions on the screen as shown in step 7.
continued on next page
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
8. Use SETUP menu to auto channel search and auto clock set.
Follow the steps on the screen to auto channel search and
automatically set the clock*. If the SET TIME ZONE or SET
DAYLIGHT SAVINGS screen appears, follow step A or B below.
If the SETUP menu appears, skip to step C.
A. If the SET TIME ZONE screen appears, select a time zone:
SET TIME ZONE
What is your time zone?
1 Eastern
Press the number on the remote (1-6) corresponding to the
ÒstandardÓ time zone you live in. If you do not know your
time zone, press 7 and an automatic setting will be made.
2 Central
3 Mountain
4 Pacific
5 Alaska
6 Hawaii
If you select Automatic for your time zone, the VCR will set
the clock using the first Coordinated Universal Time
information it finds. If the time is not correct, select a time
zone or set the clock manually. If the time is incorrect by a few
minutes (more than one minute), the local station may not be
transmitting the correct time.
7 Automatic
Press MENU to continue
SET DAYLIGHT SAVINGS
B. If the SET DAYLIGHT SAVINGS screen appears:
Does your area observe
Daylight Savings Time
from April to October?
Press 1 if your area observes daylight savings time from April
to October or press 2 if your area does not observe daylight
savings time. If you do not know, press 3.
1 Yes, DST is observed
2 No
3 Automatic
Press MENU to continue
The VCR will set the time according to the information
received from the broadcast.
C. When the auto channel search SETUP screen appears:
Press 1 if you would like the VCR to search for and store all
available channels. Press 2 if you wish to skip this step.
SETUP
Would you like the VCR
to search for and store
all available channels?
If you skip auto channel search during setup the auto clock set
feature will not be performed in this sequence.
D. Press MENU•PROG on the remote if all antenna or cable
connections are completed. Auto Channel Search will be
performed followed by automatic clock set.
1 Search for channels
2 Skip this step
If The Auto Clock Set was unsuccessful message appears, you
can press 1 to set the clock manually or try auto clock set
again. The clock must be set before you can use the timer
recording feature.
Make sure all antenna
connections to the VCR
are complete.
SETUP
The Auto Clock Set
was unsuccessful.
Would you like to set
the time and date?
Press MENU when ready
SETUP
The VCR is now setting
the clock. This may
take several minutes.
1 Set Time and Date
2 Skip this step
Try Auto Clock Set Again: If you think there is a local station
(usually PBS) broadcasting the XDS (time) information, make
sure the Auto Clock Set feature is set to ON on the TIME menu
(press 2 to exit SETUP, press MENU•PROG to display the VCR
MAIN MENU, press 3 to display the TIME menu, and press 2 to
turn the Auto Clock Set feature ON). Tune the VCR to the
channel you believe is broadcasting the information before
turning off the VCR. If the time does not set within ten
minutes, XDS information is not available. Set the time and
date manually.
Press MENU to cancel
Set Clock Manually: Press 1 and follow the directions on the
following page to manually set the clock.
* Signal not available in all areas.
continued on next page
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
8. Use SETUP menu to auto channel search and auto clock set. (continued)
Manual clock set.
If the AUTO CLOCK SET was unsuccessful:
A. Press 1 to display the SET TIME AND DATE
screen.
VCR MAIN MENU
B. Enter the time and date with the number
1 VCR Plus+
buttons on the remote.
2 Timer Recordings
3 Time
¥ Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7
TIME
for a time of 5:07. Press 1 for AM or 2
1 Set Time and Date
for PM.
SET TIME AND DATE
¥ Press CLEAR on the remote to change
Time --:--
incorrect entries.
(hh:mm)
C. Press MENU•PROG on the remote to
Date --/--/--
remove the SET TIME AND DATE screen
from the TV screen and start the clock.
Press MENU to exit
The time will appear in the VCRÕs display
panel and the time and date will appear on
the TV screen when you press DISPLAY.
If you ever need to reset the clock:
A. Press MENU•PROG on remote to display
the VCR MAIN MENU on the TV screen.
B. Press 3 to display the TIME menu.
C. Press 1 to display the SET TIME AND DATE
screen.
If you set the clock manually, Auto Clock Set
will be set to OFF.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
9. Setup VCR Plus+ channels.
The VCR must be setup with the VCR Plus+
channels before you can record using VCR Plus+.
This can be done now or at a later time.
SETUP
Would you like to set
up the channel lists
for the VCR Plus+
feature?
Press 1 if you would like to setup the VCR Plus+
channels now. Details are on page 40.
1 Set up VCR Plus+
2 Skip this step
Press 2 if you wish to skip this step.
10. Program VCR for VCR1 or VCR2•DVD button.
You can program this VCR to respond to the VCR1
or VCR2•DVD button on the remote. Details are on
page 22.
SETUP
Using the buttons VCR1
and VCR2, your remote
can control 2 VCRs.
What do you want to
call this VCR?
Press 1 if you want your VCR to respond to the
VCR1 button. Press 2 if you want your VCR to
respond to the VCR2•DVD button on the remote.
1 VCR1
2 VCR2
Remember you must press VCR1 or VCR2•DVD on
the remote Ñ whichever you selected in the menu
Ñ before the remote will operate this VCR.
SETUP
The setup procedure
is successful. You
are now ready to
begin using your VCR.
Setup is complete. Press MENU•PROG to return to
the VCR MAIN MENU.
Press MENU to continue
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
11. Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of the
channels are not active, have weak signals, or you do not
want to watch them.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
We recommend channels be placed in memory using the
Auto Channel Search feature before adding or removing
channels. Channels 2-13, L1 and L2 are preset at the
factory.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
A. Press VCR1 (VCR2•DVD) on the remote, whichever
3 Signal Type:
CABLE
you select in Step 10.
4 VCR Plus+ Channel List
5 Cable box Setup
6 DSS Setup
B. If the VCR MAIN MENU does not appear on the TV
screen, press MENU•PROG on the remote.
0 Exit
C. Press 4 to display the CHANNELS menu.
D. Press 2 to display the ADD/REMOVE CHANNELS
ADD/REMOVE CHANNELS
menu.
E. Follow the directions on the screen.
Channel 11
is presently ADDED
F. Add or remove more channels by entering channel
numbers or using CHAN up or down.
Press CLEAR to remove
Press MENU to exit
Auto channel search using the
CHANNELS menu.
If you ever need to repeat Auto Channel Search because
you change cable or antenna signals:
A. Press MENU•PROG to display the VCR MAIN MENU
on the TV screen. If this menu does not appear:
¥ Make sure TV is tuned to same channel as the CH3
CH4 switch on the back of the VCR or the TVÕs
video input (refer to TVÕs manual).
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
¥ Press VCR1 (VCR2•DVD), then press MENU•PROG
4 Channels
again.
CHANNELS
¥ If you use a basic hookup, check VCR indicator in
display panel Ð it should be on. Press TV•VCR to
turn it on.
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
4 VCR Plus+ Channel List
5 Cable box Setup
6 DSS Setup
CABLE
¥ Check the connections.
B. Press 4 to display the CHANNELS menu.
C. Press 1 to begin Auto Channel Search.
0 Exit
The VCR automatically selects the Signal Type:
CABLE (cable TV) or ANTENNA. If you need to
change the setting manually, press 3.
continued on next page
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
12. Select a language./Choisissez une langue.
You can select the language for the displays on the
VCR.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language/Langue
A. Press MENU•PROG on the remote to see the
VCR MAIN MENU on the TV screen.
B. Press 7 to display the LANGUAGE menu.
LANGUAGE
C. Select English or French.
Select a language.
¥
¥
Press 1 to select English.
Press 2 to select Français (French).
1 English
2 Fran•ais
Press MENU to continue
13. Use TV•VCR button.
Skip this step if you used one of the advanced
hookups.
When using one of the basic hookups, the TV•VCR
button lets you switch between the picture coming
from the VCR or the picture from the TV channel.
This button lets you record a program on the VCR
while watching another channel on the TV. Details
are on page 39.
A. Press VCR1 (VCR2•DVD) to set the remote to
control the VCR.
B. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
C. Press CHANNEL up or down on the VCR or
CHAN on VCRÕs remote to change channels on
the VCR.
The channel number changes in the display
panel.
D. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display
panel. Change channels using the TVÕs remote.
E. Return the TV to the VCR viewing channel Ñ
CH3 or CH4.
F. Press VCR1 (VCR2•DVD), then TV•VCR to
switch back to the picture from the VCR.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
14. Set Auto TV/VCR feature.
If you used one of the basic hookups and did not
connect the audio/video jacks of the VCR to the
TV, leave the Auto TV/VCR feature set to ON.
If you have connected your VCR using the
audio/video input of your TV, you can prevent the
VCR indicator from turning on automatically and
interrupting the cable or antenna signal to your
TV.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
A. Press MENU•PROG on remote to see VCR
MAIN MENU on the TV screen.
4 Channels
5 Setup
6 Preferences
B. Press 6 to display PREFERENCES.
C. Press 3 to select Auto TV/VCR: ON or OFF.
PREFERENCES
¥ Select ON if you used one of the basic
hookups and watch your VCR on channel 3
or 4 of your TV. The VCR will auto-
matically switch the TV¥VCR setting to
VCR every time the VCR is turned on, a
tape with the safety tab removed is inserted,
or you press PLAY.
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
ON
AUTO
ON
AUTO
BLUE
¥ Select OFF if you used one of the advanced
hookups and watch your VCR on the video
input channel of your TV. The VCR
indicator will not turn on automatically and
the signal from your antenna or cable to
your TV will not be interrupted.
Pressing TV•VCR on the remote will still
turn the VCR indicator on or off and switch
the antenna signal.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Remote Control
Your back-lit remote has a light button ( ) that glows in the dark. Press this button to light the buttons on the remote. The remote
buttons remain lit when they are pressed within a few seconds of each other. If a button is not pressed within approximately eight
seconds, the light turns off to conserve battery power.
Component Buttons
Press one of the buttons to set the remote to operate that component.
AUX (Auxiliary)
Used with PWR button to turn on
another brand of TV, other than
RCA, when the remote is
programmed to control that TV.
See page 23.
Can be programmed to control a
compatible RCA audio or video
component. See page 25.
SAT•CABLE
Turns on a compatible cable box or
VCR1
Turns on a compatible RCA,
ProScan, or GE VCR and sets
remote to control the VCR.
satellite receiver. See page 24.
Used with PWR button to turn on
another brand of cable box or
receiver, other than RCA, when the
remote is programmed to control
that cable box or receiver. See
page 24.
R
S
1
VCR2•DVD
VCR•DVD AUX
TV
Turns on a compatible RCA,
ProScan, or GE VCR and sets
remote to control VCR when it has
been setup. See page 22.
PWR
REW
2
PLAY
STOP
FF
TV
Used with PWR button to turn on a
compatible RCA or ProScan
LaserDisc player. See page 22.
Turns on a compatible RCA,
ProScan, or GE TV and sets the
remote to control the TV.
REC
PAUSE
SEARCH
DISPLAY
Can also be programmed to control
a compatible RCA DVD component.
VCR Function Buttons
A
Press VCR1 (VCR2•DVD) to set remote to control the VCR to use the function
MUTE
PREV CH
INPUT
CHAN Up or Down
Selects next higher or lower channel
in the VCRÕs channel memory.
1
2
5
8
3
Turns the line input on or off.
L1 or L2 will appear in the VCRÕs
display panel and VIDEO1 or
VIDEO2 will appear on the TV
screen.
4
6
CLEAR
7
INPUT
9
TV•VCR
Resets time counter to 0:00:00.
Allows you to change entries when
setting the clock or VCR for a VCR
Plus+ or timer recording.
Line input refers to the signal
coming from the component
connected to the audio/video input
jacks on the back (L1) or front (L2)
of the VCR.
0
•
CLEAR
SPEED
M
C
DISPLAY
Shows VCR operating displays on
the TV screen.
EDIT
F.ADV
e
MENU•PROG
MOVE
Displays the VCR MAIN MENU on
the TV screen.
Displays program information
when available.
+
TRACKING
SLOW
_
Removes a menu from the screen.
Displays the time counter.
MOVE Arrow Buttons (
)
EDIT
Allow you to move through the
menus, enter data and change
settings of selected features.
See page 10.
Signals two properly connected
compatible VCRs to begin copying
a tape. See page 48.
F.ADV (Frame Advance)
Lets you view one frame with each
press of the button while the tape is
paused.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then press
the other two numbers.
FF (Fast Forward)
Fast forwards the tape when the
VCR is stopped.
Searches the picture in forward
motion during playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons
VCR Function Buttons
(continued)
PAUSE
REC
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, or SLP).
Pauses action for viewing during
Starts VCR recording.
playback.
Used for express recording (XPR).
Pauses recording to prevent
recording of unwanted scenes.
See page 44.
STOP
Stops the normal functions such as
record, playback, rewind, fast
forward, and pause.
REW (Rewind)
Rewinds the tape when the VCR is
stopped.
PLAY
Plays a tape.
Searches the picture in reverse
motion during playback.
PWR (Power)
Turns off VCR when remote is set
to control the VCR.
TRACKING Up and Down
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
SEARCH
Displays INDEX, GO-TO, and
BLANK SEARCH menus on TV.
Press twice to turn off all
compatible RCA components.
Reduces picture ÒjitterÓ during
stop-action playback.
Used during playback with the
COMMERCIAL ADVANCEª
feature. See pages 36-37.
PREV CH (Previous Channel)
Switches between two channels.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 18.
Select one channel and then use the
number buttons to select another.
Press PREV CH to switch between
the two channels.
SLOW – / +
Used for slow-motion playback.
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with every TV.
MOVE Arrow
MUTE
PREV CH (Previous Channel)
Switches between two channels.
Buttons (
)
Turns the TV sound on or off.
Allow you to move through the
menus, enter data and change
settings of selected features.
Select one channel and then use
the number buttons to select
another. Press PREV CH to
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
CHAN Up or Down
switch between the two channels.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then press
the other two numbers.
Selects next higher or lower
channel in the TVÕs channel
memory when remote is set to
control a TV.
Used as an ENTER button on
some TVs.
SLOW – / +
Used with the TVÕs menus to
select and adjust features.
PWR (Power)
Turns off a compatible TV when
remote is set to control TV.
CLEAR
Removes menus or status
displays from the screen.
VOL Up and Down
Press twice to turn off all
compatible RCA components.
Raises and lowers sound.
DISPLAY
Shows the status displays on the
screen.
Used with TV button to turn on a
compatible TV, other than RCA,
when the remote is programmed
to control that TV. See page 23.
Removes menus or displays from
the screen.
Cable Box and Satellite Receiver Function Buttons
Press the SAT•CABLE button to set remote to control a compatible cable box or satellite receiver. Some buttons
may not work with every cable box or receiver. If you have a compatible RCA brand receiver, test the ÒTV
Function ButtonsÓ to see which ones operate the receiver.
CHAN Up or Down
Selects next higher or lower
channel.
Numbers (0 through 9)
Select a channel using the number
buttons.
PWR (Power)
Turns off a compatible cable box
or satellite receiver when remote
is set to control it.
Press twice to turn off all
compatible RCA components.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Using the VCR2•DVD Button
Controlling a VCR
The VCRÕs remote controls two compatible RCA, ProScan, or GE VCRs with the VCR1 and VCR2•DVD
buttons. Most compatible VCRs automatically respond to VCR1 without being programmed. If you own two
compatible VCRs, test them to see if VCR1 turns on both VCRs. If it does, then you may want to program this
VCR to respond to the VCR2•DVD button on the remote.
VCR MAIN MENU
Program the VCR for Remote Control
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
Set the Remote Control feature of the VCR to
the VCR1 or VCR2 position. The remote then
controls the VCR with either the VCR1 or
VCR2•DVD button Ñ whichever position you
select in the menu.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
ON
1. Press MENU•PROG to display the VCR
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
ON
AUTO
ON
AUTO
BLUE
MAIN MENU.
2. Press 6 to display PREFERENCES.
3. Press 1 to activate the Remote Control
PREFERENCES
1 Remote Control: VCR1
feature.
2 Auto Play:
ON
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
ON
AUTO
ON
AUTO
BLUE
4. Press VCR1 or VCR2•DVD to change the
setting and program this VCR to respond
to the VCR1 or VCR2•DVD button Ñ
whichever you select.
Press VCR2 to change
Important Reminder: Remember you must
press VCR1 or VCR2•DVD on the remote Ñ
whichever you selected in the menu Ñ
before the remote will operate this VCR.
PREFERENCES
1 Remote Control: VCR2
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
ON
AUTO
ON
AUTO
BLUE
Controlling a LaserDisc Player or DVD Component
The VCR2•DVD button on the VCRÔs remote will also control the primary functions of an RCA, ProScan, or GE
LaserDisc player without being programmed. It can also be programmed to control an RCA DVD component using
the code below. If you ever need to reprogram the remote to operate a VCR or LaserDisc player, use the code
Program the Remote Control
1. Turn on the component.
2. Point the VCR remote at the component
3. Hold the VCR2•DVD button and press three numbers buttons to
RCA, ProScan or GE Codes
enter the code for the component.
VCR LaserDisc Player DVD
4. Release the buttons.
037
037
078
5. Press PWR. If the component turns off, setup is complete.
Operate the Component
After you have set up your remote to control your component, test the
remote buttons to see which ones operate it.
1. Point the remote at the component and press VCR2•DVD.
2. If the component does not turn on in step 1, press VCR2•DVD and
then PWR.
3. Test the remote buttons to see which ones operate the component.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Controlling a TV
The VCRÔs remote is preprogrammed to control the basic functions of a compatible RCA, ProScan, or GE TV. The remote can also be
setup to control other manufacturerÔs brands. To program the remote, use the remote buttons that correspond to your brand.
Program the Remote for a TV
1. Turn on the TV.
2. Point the VCRÕs remote at the TV.
3. Hold the TV button and press three number buttons for your brand.
4. Release the buttons.
5. Press PWR on the remote. If the TV turns off, setup is complete.
6. Repeat steps 2 – 4 with three other buttons if the first ones do not work.
TV Codes
Brand*
Code
Brand*
Code
Brand*
Code
Brand*
Code
A-Mark . . . . . . . . . . . . . . . . . . . . . . . .102
Admiral . . . . . . . . . . . . . . . . . . . .005,114
Amtron . . . . . . . . . . . . . . . . . . . . . . .064
Akai . . . . . . . . . . . . . . . . . . . . . . .002,103
Anam . . . . . . . . . . . . . . . . . . . . . .104,105
Anam National . . . . . . . . . . . . .038,106
AOC . . . . . . . . . . . .011,019,027,088,107
Bell&Howell . . . . . . . . . . . . . . . . . . .005
Candle . . . . . . . . . . . . . . . . .011,027,033
Citizen . . . . . . . . . . . . . .011,027,033,064
Colortyme . . . . . . . . . . . . . .011,027,084
Concerto . . . . . . . . . . . . . . . . . . .011,027
Contec/Cony . . . .036,037,040,042,064
Craig . . . . . . . . . . . . . . . . . . . . . . . . . .064
Curtis Mathes . . . .000,011,015,027,037
CXC . . . . . . . . . . . . . . . . . . . . . . . . . .064
Daewoo . . . . . . . . .011,019,027,012,116
Daytron . . . . . . . . . . . . . . . . . . . .011,027
Dimensia . . . . . . . . . . . . . . . . . . . . . .000
Electrohome . . . . .006,011,014,027,038,
. . . . . . . . . . . . . . . . . . . . . . . . . . .061,068
Emerson . . . . .011,026,027,028,029,030,
. . . . . .031,032,037,042,053,064,065,067,
. . . . . . . . . .075,076,078,079,094,095,096
Envision . . . . . . . . . . . . . . . . . . .011,027
Fisher . . . . . . . . . . . . . . .017,021,039,041
Funai . . . . . . . . . . . . . . . . . . . . . . . . .064
GE . . . . . . . . . .000,008,009,011,012,027,
. . . . . . . . . . . . . . . . .038,068,086,089,091
Goldstar . . . . . . . .003,004,006,011,019,
. . . . . . . . . . . . . . . . . . . . . . . .027,037,050
Hallmark . . . . . . . . . . . . . . . . . . .011,027
Hitachi . . . . . .009,011,027,036,037,040,
. . . . . . . . . .047,048,063,080,094,097,098
Infinity . . . . . . . . . . . . . . . . . . . . . . . .013
JBL . . . . . . . . . . . . . . . . . . . . . . . . . . .013
Jensen . . . . . . . . . . . . . . . . . . . . .011,027
JVC . .012,024,036,037,040,048,051,074
Kawasho . . . . . . . . . . . . . . .002,011,027
Kenwood . . . . . . . . . . .006,011,014,027
Kloss Novabeam . . . . . . . . . . . .035,043
KTV . . . . . . . . . . . . . . . . . . . . . . . . . .078
Loewe . . . . . . . . . . . . . . . . . . . . . . . . .013
Luxman . . . . . . . . . . . . . . . . . . . .011,027
LXI . . . . . . . . . .000,013,018,021,023,054
Magnavox . . .006,007,010,011,013,016,
. . . . . .027,033,035,043,049,066,087,089
Marantz . . . . . . . . . . . . .011,013,027,069
Memorex . . . . . . . . . . . . . . . . . . . . . .005
MGA . . . . . . . . . . .006,011,014,019,022,
. . . . . . . . . . . . . . . . .027,041,056,061,068
Mitsubishi . . . . . . .006,011,014,019,022,
. . . . . . . . . . . . .027,041,055,056,061,068
MTC . . . . . . . . . . . . . . . . . . .011,019,027
Multivision . . . . . . . . . . . . . . . . . . . .081
NAD . . . . . . . . . . . . . . . . . . . . . .018,023
NEC . . . . . . . . .011,014,019,027,038,084
Panasonic . . . . . . . .012,013,038,086,111
Penney . . . . . .000,008,011,019,027,040,
. . . . . . . . . . . . . . . . . . . .068,077,086,088
Philco . . . .006,007,010,011,013016,019,
. . . . . .027,033,035,037,038,043,087,089
Philips . . .002,006,007,010,011,013,016,
. . . . . . . . . .033,035,037,038,043,066,073
Pioneer . . . . . .011,027,045,062,093,113
Portland . . . . . . . . . . . .011,019,027,037
ProScan . . . . . . . . . . . . . . . . . . . . . . .000
Proton . . . . . . . . . . . . . .011,027,037,072
Quasar . . . . . . . . . . . . . . . . .012,038,092
Radio Shack . . . . .000,021,025,036,037,
. . . . . . . . . . . . . . . . . . . . . . . .059,064,078
RCA . . . . . . . .000,006,011,019,027,034,
. . . . . . . . . .038,044,046,088,100,101,109
Realistic . . . . . . . . . . . . . . . . . . . . . . .021
Sampo . . . . . . . . . . . . . . . . . . . . .011,027
Samsung . . . . . . . .006,011,014,015,019
. . . . . . . . . . . . . . . . .027,036,037,077,110
Sanyo . . . . . . . .017,021,039,056,057,058
Scott . . . . . . . . . . . . . . . . . . .028,037,064
Sears . . . .000,006,011,014,017,018,021,
. . .023,027,039,040,041,051,071,083,095
Sharp . . . . . . . . . . .011,020,025,027,037
. . . . . . . . . . . . . . . . .052,053,059,060,108
Signature . . . . . . . . . . . . . . . . . . .005,094
Sony . . . . . . . . . . . . . . . . . . . . . . . . . .002
Soundesign . . . . . . . . . . . . .011,027,033
Sylvania . . . . .006,007,010,011,013,016,
. . . . . .027,033,035,043,049,066,087,089
Symphonic . . . . . . . . . . . . .064,076,115
Tatung . . . . . . . . . . . . . . . . . . . . . . . .038
Technics . . . . . . . . . . . . . . . . . . . . . . .012
Techwood . . . . . . . . . . . . . . . . . .011,027
Teknika . . . . . . . . .011,019,027,033,036
. . . . . . . . . . . . . . . . . . . . . . .,037,040,066
Telecaption . . . . . . . . . . . . . . . . . . . .090
TMK . . . . . . . . . . . . . . . . . . . . . .011,027
Toshiba . . . . . . . . .018,021,023,040,071,
. . . . . . . . . . . . . . . . . . . . . . . .077,085,090
Universal . . . . . . . . . . . . . . . . . .008,009
Victor . . . . . . . . . . . . . . . . . . . . . . . . .051
Vidtech . . . . . . . . . . . . . . . . . . . .019,027
Wards . . . . . . . . . . .000,005,006,007,008
. . . . . .009,010,011,013,019,025,027,028,
. . . . . . . . . .035,043,059,066,076,082,089
Yamaha . . . . . . . . . . . . .006,014,019,027
Zenith . . . . . . . . . . . . . . . . . .001,099,114
* The remote may not be able to control every model TV of the brands listed.
Operate the TV
After you have set up your remote to control your TV, test the TV buttons to
see which ones operate your TV.
1. Point the remote at the TV and press TV.
2. If TV does not turn on in step 1, press TV and then PWR.
3. Use the ÒTV Function ButtonsÓ as described on page 21.
Helpful Hint: Notice the difference between the TV and VCR on-screen displays.
This is one way to tell if the remote is set to control the VCR or the TV.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Controlling a Cable Box or Satellite Receiver
The SAT•CABLE button on the VCRÕs remote is preprogrammed to control either a compatible RCA cable box or satellite
receiver. If your cable box or receiver is another manufacturerÕs brand and has its own remote, you will probably be able to
program the VCRÕs remote to control it. To program the VCRÕs remote, enter the code that corresponds to your brand.
Program the Remote for a Cable Box or Satellite Receiver
1. Turn on the cable box or satellite receiver.
2. Point the VCR remote at the cable box or receiver.
3. Hold the SAT¥CABLE button and press three number buttons to enter the code for your brand.
4. Release the buttons.
5. Press PWR on the remote. If the cable box or receiver turns off, setup is complete.
6. Repeat steps 2 – 5 with a different code if the first one does not work.
Cable Box Codes
Brand*
Code
Brand*
Code
Brand*
Code
Magnavox . . . .007,008,019,021,026,
. . . . . . . . . . .028,029,032,033,040,041
NSC . . . . . . . . . . . . . . . . . . . . . . . .009
Oak . . . . . . . . . . . . . . . . .001,016,038
Oak Sigma . . . . . . . . . . . . . . . . . .016
Panasonic . . . . . . . . .003,027,039,061
Philips . . . .007,008,019,021,026,028,
. . . . . . . . . . . . . .029,032,033,040,041
Pioneer . . . . . . . . . . . . . .018,020,044
RCA . . . . . . . . . . . . . . . . . . . .000,027
Randtek . . . . . . . . . . . . . . . . .007,008
Regal . . . . . . . . . . . . . . . .003,012,013
Regency . . . . . . . . . . . . . . . . .002,033
Samsung . . . . . . . . . . . . . . . . . . . .044
Sci. Atlanta . . . .003,022,035,063,064
Signature . . . . . . . . . . . . . . . . . . .046
Sprucer . . . . . . . . . . . . . . . . . . . . .027
Starcom . . . . . . . . . . . . . . . . . . . . .046
Stargate 2000 . . . . . . . . . . . . . . . .058
Sylvania . . . . . . . . . . . . . . . . .011,059
Teknika . . . . . . . . . . . . . . . . . . . . .006
Texscan . . . . . . . . . . . . . .010,011,059
Tocom . . . . . . . .017,021,049,050,055
Unika . . . . . . . . . . . . . . . .031,032,041
Universal . . . . . . . . . . . .051,052,060
Viewstar . . .007,008,019,021,026,028
. . . . . . . . . . . . . .029,032,033,040,041
Warner Amex . . . . . . . . . . . . . . .044
Zenith . . . . . . . . . . . .014,042,057,061
ABC . . . . . . . . . . . . .022,046,053,054
Anvision . . . . . . . . . . . . . . . .007,008
Cablestar . . . . . . . . . . . . . . . .007,008
Diamond . . . . . . . . . . . . . . . . . . . .056
Eagle . . . . . . . . . . . . . . . . . . . .007,008
Eastern Int. . . . . . . . . . . . . . . . . . .002
General Instuments . . . . . . . . . . .046
GI 400 . . . . . . . .004,005,015,023,024,
. . . . . . . . . . . . . . . . . . . . .025,030,036
Hamlin . . . . . . .003,012,013,034,048
Hitachi . . . . . . . . . . . . . .037,043,046
Jerrold . . . . . . .004,005,015,023,024,
. . .025,030,036, 045,046,047,062,065
Macom . . . . . . . . . . . . . . . . . .037,043
Satellite Receiver Codes
Brand*
Code
Brand*
Code
Brand* . . . . . . . . . . . . . . . . . . . .Code
STS3 . . . . . . . . . . . . . . . . . . . . . . . .087
STS4 . . . . . . . . . . . . . . . . . . . . . . . .088
Toshiba .. . . . . . . . . . . . . . . . . . . .089
Uniden . . . . . . . . . . . . . . . . . . . . .090
Video Cipher II. . . . . . . . . . . . . . .091
Chaparral . . . . . . . . . . . . . . .080,081
Cheyenne . . . . . . . . . . . . . . . . . .081
Drake . . . . . . . . . . . . . . . . . . .082,083
GE . . . . . . . . . . . . . . . . . . . . . . . . . .000
General Instruments . . .092,093,094
Realistic . . . . . . . . . . . . . . . . . . . . .084
RCA. . . . . . . . . . . . . . . . . . . . . . . . 000
Sierra I,0II,0III . . . . . . . . . . . . . . .081
STS1 . . . . . . . . . . . . . . . . . . . . . . . .085
STS2 . . . . . . . . . . . . . . . . . . . . . . . .086
* The remote may not be able to control every cable box or satellite receiver of the brands listed.
Operate the Cable Box or Satellite Receiver
After you have setup your remote (if required) to control your cable box or receiver, test the buttons
to see which ones operate it.
1. Point the remote at the cable box or satellite receiver and press SAT•CABLE.
2. If the cable box does not turn on in step 1, press SAT•CABLE and then PWR.
3. Use the ÒCable Box or Receiver Function ButtonsÓ for the cable box and test the ÒTV Function
ButtonsÓ to see which ones operate the satellite receiver. See page 21.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Controlling an Auxiliary RCA Component
The remote that came packed with your VCR is also capable of controlling one compatible
RCA component, such as an AM/FM radio, CD player, tape players, phonograph, RCA
digital satellite receiver, or RCA DVD component. The remote must be programmed for the
specific component it is to control. To program the remote, use the code that corresponds to
your component.
Program the Remote for an Auxiliary Component
1. Turn on the component.
2. Point the VCRÕs remote at the component.
3. Hold the AUX button and press three number buttons to
enter the code for your component.
4. Release the buttons.
5. Press PWR on the remote. If the component turns off,
setup is complete.
Type of RCA Auxiliary Equipment and Code
Cassette
Tape1
006
Cassette
Tape2
009
RCA
AM/FM
003
AUX
004
Phono
005
CD
007
DSS
008
DVD
010
*The remote may not be able to control every RCA model of auxiliary equipment listed.
Operate the Auxiliary Component
After you have setup your remote to control your component, test the
buttons to see which ones operate the component.
1. Point the remote at the component and press AUX.
2. If the component does not turn on in step 1, press AUX and then
PWR.
3. Test the buttons on the remote to see which ones operate your
component. Refer to the ÒRemote ControlÓ section.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Operating Instructions
To Play a Tape
1. Turn on the TV and tune it to channel 3, 4, or TVÕs video input
to see the picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in (
) indicator
lights, and the VCR indicator lights if the Auto TV/VCR feature
is set to ON. The tape automatically begins playback if the
safety tab on the cassette has been removed and the auto play
feature is turned on.
POWER
EJECT
PLAY
STOP
PAUSE
RECORD
Safety Tab
3. Press PLAY, if necessary. PLAY appears in the VCRÕs display
panel.
4. Press TRACKING up or down to remove any streaks from the
picture, if necessary. Details are on page 31.
5. Press STOP.
6. Press REW on the remote or turn the shuttle ring toward REW
on the VCR.
The VCR will automatically rewind the tape if it reaches the
end of the tape during playback. While rewinding, you can
press POWER and the VCR will turn off after rewinding.
7. Press EJECT on the VCR to eject the tape once it is completely
rewound.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Tape Playback: HI-FI/LINEAR/MIX Feature
The VCR records the same audio on both the hi-fi and linear tracks on the tape. The Hi-Fi stereo sound is
recorded on separate left and right stereo channels. Monaural sound is recorded on the linear track.
To enjoy hi-fi sound, connect your VCR to a stereo television or amplifier/receiver using the audio/video
jacks. The Tape Playback: HI-FI/LINEAR/MIX feature lets you select which audio you play back.
To Select Playback Sound
1. Press MENU•PROG to see the VCR MAIN MENU
on the TV screen.
2. Press 8 to see the AUDIO menu on the TV screen.
3. Press 2 to switch between HI-FI, LINEAR, or MIX
sound.
¥ Select HI-FI to play back sound recorded on
the hi-fi track and for normal use.
The HIFI indicator is lit in the VCRÕs display
panel during hi-fi playback.
¥ Select LINEAR to play back the sound
recorded on the linear monaural track Ð used
to playback a second audio program (SAP).
¥ Select MIX to play back the sound recorded on
both the linear track and the hi-fi track,
sound-on-sound.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
PWR
REW
5 Setup
6 Preferences
7 Language/Langue
8 Audio
TV
PLAY
FF
REC
STOP
AUDIO
1 Reception:
PAUSE
STEREO
2 Tape Playback: HI-FI
C
0 Exit
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Auto Play Feature
This feature lets you tell the VCR whether you want it to automatically start playing
a tape that is inserted with the safety tab removed.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
1. Press MENU•PROG on the remote to see the VCR
MAIN MENU on the TV screen.
2. Press 6 to display the PREFERENCES menu.
PREFERENCES
1 Remote Control: VCR1
3. Press 2 to select Auto Play: ON or OFF.
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
ON
AUTO
ON
AUTO
BLUE
¥ Select ON to have a tape with its safety tab
removed start playing automatically.
¥ Select OFF if you do not want a tape with its
safety tab removed to start playing
automatically.
Auto Repeat Feature
The VCR will automatically repeat a segment of tape.
1. Locate the beginning of the segment you want the
VCR to repeat, and press STOP.
2. Press DISPLAY to display the time counter, and
press CLEAR to reset it to 0:00:00.
3. Press MENU•PROG on
VCR MAIN MENU
the remote to see the
VCR MAIN MENU on
the TV screen.
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
4. Press 6 to display the
PREFERENCES menu.
PREFERENCES
PWR
1 Remote Control: VCR1
TV
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
5. Press 8 to display the
ON
AUTO
ON
AUTO
BLUE
REW
AUTO REPEAT menu.
PLAY
FF
REC
6. Use the number buttons
to enter the length of
time (in hours and
minutes) of the segment
you want the VCR to
repeat.
STOP
PAUSE
C
AUTO REPEAT
7. Press MENU•PROG to
remove the menu from
the screen.
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to -:--
(h:mm)
The VCR will play the
tape until the specified
counter reading is
Press MENU to exit
reached, rewind the
tape and replay the
segment over and over.
8. To stop auto repeat,
display the AUTO
REPEAT menu and
press CLEAR or eject the
cassette.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Pause for Stop Action
This feature stops the tape in action and allows you to examine the details of the
scene. Stop action works best for tapes recorded in the SP and SLP speed.
1. Press PAUSE during playback to stop the action.
STILL appears in the VCRÕs display panel.
2. Press TRACKING up or down to reduce any
jittering of the picture.
3. Press PAUSE or PLAY to return to playback.
The VCR will automatically switch from stop-
action playback to stop after a few minutes.
Picture Search
You can search a picture during playback by fast forwarding or rewinding the
tape. Sound is turned off during picture search. The picture is best for tapes
recorded in the SP or SLP speed.
Fast Forward Search
1. Press FF on the remote or turn the shuttle dial
clockwise toward FWD on the VCR to search
forward at a faster-than-normal speed.
2. To return to playback, press FF on the remote,
PLAY, or turn the shuttle dial again.
Rewind Search
1. Press REW on the remote or turn the shuttle ring
counterclockwise toward REW on the VCR to
search in reverse at a faster-than-normal speed.
2. To return to playback, press REW on the remote,
PLAY, or turn the shuttle dial again.
C
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Frame Advance
Frame advance lets you view one stop-action frame after another. Frame
advance works best for tapes recorded in the SP or SLP speed.
1. Press PAUSE to stop the action. STILL
appears in the VCRÕs display panel.
2. Press F.ADV each time you want to view
a frame of the scene.
3. Press PAUSE or PLAY to resume normal
playback.
Slow Motion
You can view the picture in slow motion during play or play pause. The
SLOW – and + buttons on the remote and the shuttle dial on the VCR
allow you to change the speed. Sound is turned off during slow-motion
playback. Slow motion works best in the SP or SLP speed.
1. During playback, press SLOW + or – on
the remote to start slow-motion
playback or press PAUSE and turn the
shuttle dial on the VCR in either
direction.
SLOW + or – appears in the VCRÕs
display panel.
2. Press SLOW + on the remote to increase
the speed or SLOW – to decrease the
speed.
The speed changes with the amount the
shuttle dial on the VCR is turned.
PWR
REW
TV
3. Use TRACKING up or down to remove
PLAY
any streaks from the picture.
FF
REC
STOP
4. Release the shuttle dial on the VCR to
PAUSE
return to pause.
C
Press PLAY to return to playback.
The VCR will automatically switch from
slow-motion playback to stop after a few
minutes.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Automatic Tracking
The VCR has automatic tracking which adjusts the picture when playing back a
tape recorded on another VCR. Automatic tracking is turned on whenever a
tape is inserted or the VCRÕs power is turned on.
Manual Tracking
Occasionally, you may need to manually adjust tracking on a tape recorded on
a different VCR or camcorder. The TRACKING buttons on the remote or VCR
are used when playing a tape. They have no effect during recording.
¥ When streaks or snow appear, press
TRACKING up or down for the best possible
picture.
¥ Press TRACKING up or down during stop-
action pause to reduce picture ÒjitterÓ.
¥ Press both TRACKING buttons on the VCR at
the same time to turn automatic tracking back
on or eject and re-insert the cassette.
Pro-Tect Plus™ Locking Feature
To protect your timer recordings from any unwanted changes, lock the VCR.
The buttons on the VCR and remote will not operate the VCR. Just follow the
directions below.
To Lock the VCR
1. Set up your VCR for a timer recording.
2. Insert a cassette with safety tab intact.
3. Place VCR in stop mode.
PWR
REW
TV
PLAY
FF
REC
4. Press and hold PWR on the remote for at least
six seconds until LOCK appears in the VCR's
display panel.
STOP
PAUSE
C
To Unlock the VCR
Press and hold VCR1 (VCR2•DVD) on the remote
until HELLO appears in the VCRÕs display panel
to unlock the controls.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Index Search
The VCR has a ÒVHS Index Search SystemÓ that automatically records an index
mark on the tape every time you stop and start recording. During playback you can
locate the program you want to play by the number of index marks.
The VCR will automatically locate the index number you select. The VCR will
search forward or reverse from the location you are on the tape.
1. Insert the prerecorded tape and press STOP.
INDEX SEARCH
2. Press SEARCH on the remote to display the INDEX
SEARCH menu on the TV screen.
Enter Index Number
01
3. Press two number buttons to enter the number of index
marks you want the VCR to search.
Press FWD or REW
Press SEARCH to exit
Press CLEAR to correct an entry.
4. Press FF on remote or turn the shuttle ring clockwise
toward FWD on the VCR to search forward.
Press REW on remote or turn the shuttle ring
counterclockwise toward REW on the VCR to search in
reverse.
The time counter is displayed in the upper right corner of
the TV screen during search.
0:30:00
PWR
TV
REW
PLAY
FF
5. Press STOP to stop index searching.
REC
STOP
PAUSE
Some index marks may be missed by the VCR.
¥ A mark too close to your location on the tape.
C
¥ The mark at the beginning of a recorded
segment of five minutes or less.
¥ The first index mark on the tape when you
start at the beginning of the tape.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Go-To Search
The go-to search feature allows you to locate a counter reading on the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote twice to display the GO-TO
SEARCH menu on the TV screen.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REW or FF to go to
0:00:00
Press SEARCH to exit
3. Press number buttons to enter the hour(s) and minute(s) of
the time counter reading you want the VCR to search.
Press CLEAR to correct an entry.
4. Press FF on remote or turn the shuttle ring clockwise
toward FWD on the VCR to search forward.
Press REW on remote or turn the shuttle ring
counterclockwise toward REW on the VCR to search in
reverse.
The time counter is displayed in the upper right corner of
the TV screen during search.
5. Press STOP to stop go-to searching.
Blank Search
The VCR searches for blank portions of the tape that are more than six
seconds in length.
1. Insert the tape and press STOP.
PWR
REW
TV
2. Press SEARCH on the remote three times
to display the BLANK SEARCH menu on
the TV screen.
PLAY
FF
REC
STOP
PAUSE
BLANK SEARCH
C
Press FF to begin
Searching for blank
section of tape.
Press SEARCH to exit
3. Press FF to begin searching for six seconds
of blank tape. A message appears on the
screen if a blank area is not found.
4. Press STOP to stop blank searching.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
DISPLAY Button
Press DISPLAY Button
1. Press DISPLAY to display the status of
the VCR, channel number, station ID (if
available), time counter, title of program
PROGRAM DETAILS
Joan's Hour
STOP CH 05 0:30:00
WABC
(if available), date, time, and tape speed
on the TV screen. The time will appear
in the display panel.
Press
DISPLAY
Again
Status Displays
Will Time Out
Start 11:00 PM
Length 01:00
Time Remaining 00:15
Rating PG
Title: Joan’s Hour
The time and date must be set before
they are displayed. If you do not press
DISPLAY again, these displays will time
out.
11/18/96 Mon 01:30AM SLP
Press DISPLAY Again
Press DISPLAY
2. Press DISPLAY again to display
information about the program that is
playing (if available).
0:30:00
Hours
If program information is not available,
Title Unavailable will appear.
Minutes
Seconds
3. Press DISPLAY again to have only the
time counter remain on the TV screen.
The time counter will appear instead of
the time in the VCRÕs display panel.
Time Counter Only
Will Not Time Out
Press
DISPLAY
Again
Press DISPLAY Again
4. Press DISPLAY again to remove the time
counter from the TV screen.
The time counter will remain in the
VCRÕs display panel and no status
displays will appear on the TV screen.
This is convenient for editing tapes.
Press
DISPLAY
Again
No Displays Will Appear
(Time Counter Appears
in VCRÕs Display Panel)
(Clock Appears in VCRÕs
Display Panel)
5. Press DISPLAY again. No displays will
appear on the screen. The clock will
appear in the display panel.
Turning off the VCR returns the displays
to normal.
PWR
TV
REW
PLAY
FF
REC
STOP
PAUSE
C
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Program Information
Some stations broadcast program information along with the program. When this
information is available, it will be displayed automatically when you press the DISPLAY
button.
STOP CH 05 0:30:00
WABC
1. Press DISPLAY to display the status displays on the TV
screen. The title of the program and station ID will
appear if they are available.
Title: Joan’s Hour
If program information is not available, Title Unavailable
11/18/96 Mon 01:30AM SLP
will appear.
PROGRAM DETAILS
Joan's Hour
2. Press DISPLAY again to display information about the
program (start time, length, time remaining and rating)
on the screen. This display will time out automatically if
no button is pressed, or:
Start 11:00 PM
Length 01:00
Time Remaining 00:15
Rating PG
Press DISPLAY three times to remove the PROGRAM
DETAILS screen from the TV. The clock will appear in
the VCRÕs display panel.
Time Counter
The time counter shows the actual time it takes to record a program or play back a
segment of a prerecorded tape. It helps locate the beginning or end of programs you
taped. The time counter resets to 0:00:00 whenever the tape is ejected from the VCR.
For example, if a 30-minute program was recorded at the beginning of the tape, you
would:
1. Insert the prerecorded tape. Press STOP. Make sure
the tape is rewound.
2. Press DISPLAY three times to display only the time
counter on the TV screen.
PWR
TV
0:30:00
REW
PLAY
FF
Hours
REC
STOP
Minutes
PAUSE
Seconds
C
Time Counter Only
Will Not Time Out
3. Press CLEAR to reset the time counter to 0:00:00.
4. Press FF on remote or turn the shuttle on the
VCR clockwise to fast forward the tape until the
time counter reads 0:30:00. Press STOP.
This is the approximate end of the program and
you can begin recording at this spot.
5. Press DISPLAY twice to remove the time counter
from the screen. The clock will appear in the
VCRÕs display panel.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMERCIAL ADVANCE ª Feature
Recording and Playback
COMMERCIAL ADVANCEª is a patented technology that detects and marks most commercials on
your tape for any recording that is more than 15 minutes long. During playback, the VCR automatically
skips the detected commercial segments or you can choose to manually skip them. This feature reduces
three minutes of commercials into approximately 8-12 seconds of fast forwarding in the SLP speed. You
can select a background of blue or see the video as the commercials are skipped.
After recording, the VCR rewinds the tape to the beginning of the recording and determines where the
commercials are located. It then marks the beginning and end of the detected commercial segments and
returns the tape to the end of the recording. It does not erase the commercials from the tape.
Because television signals do not indicate where commercials are located, this feature finds and marks
them through a set of formulas based on how television is broadcast today. Since television stations
broadcast differently and insert their own commercials, you may experience some variations in this
featureÕs effectiveness. Station promotions, identifications, and announcements are not considered
commercials Ñ but might be skipped.
See page 57 for answers to common questions about COMMERCIAL ADVANCEª .
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
COMMERCIAL ADVANCE™ Marking
1. Press MENU•PROG to display the VCR MAIN MENU.
2. Press 6 to display the PREFERENCES menu.
3. Make sure CA Marking is set to ON. If not, press 5.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
The VCR will mark most commercials for the
following types of recording:
ON
AUTO
ON
AUTO
BLUE
¥VCR Plus+, Timer, or Express Recording: The
VCR will automatically mark the commercials after
the power is turned off.
¥Manual Recording: When you press STOP to stop
recording, the VCR will ask you if you want to mark
the commercials. Just follow the on-screen display.
The VCR is waiting to
mark commercials in the
program you recorded.
1 Mark them now
2 Mark them later
3 Don't mark commercials
MARK and COMM alternate in the display panel
while the VCR is marking commercials.
The VCR will begin
marking in 30 seconds...
To Stop COMMERCIAL ADVANCE™
Marking
Press STOP to cancel commercial marking.
Marking Commercials...
Press STOP to cancel
To Turn Off Marking
For special VCR use (such as editing or copying) or if you decide not to use this
feature, turn COMMERCIAL ADVANCEª marking (CA Marking) off.
PREFERENCES
1 Remote Control: VCR1
1. Press MENU•PROG to display the VCR MAIN MENU.
2. Press 6 to display the PREFERENCES menu.
3. Press 5 to select CA Marking: OFF.
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
ON
AUTO
ON
AUTO
BLUE
The VCR will not mark the commercials.
COMMERCIAL ADVANCEª is a trademark of Arthur D. Little Enterprises, Inc.
A Jerry Iggulden invention licensed by Arthur D. Little Enterprises, Inc.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMERCIAL ADVANCEª Feature
Recording and Playback
To Select a Background for Playback
1. Press MENU•PROG to display the VCR MAIN
PREFERENCES
MENU.
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
2. Press 6 to display the PREFERENCES menu.
3. Press 7 to select CA Display: BLUE or VIDEO.
ON
AUTO
ON
AUTO
BLUE
¥ Select BLUE to have the VCR display a blue
screen while it advances through the block of
marked commercials.
¥ Select VIDEO to have the VCR display the video
as it advances through the block of marked
commercials.
To Play Back a Recording Made Using COMMERCIAL ADVANCE™
1. Press MENU•PROG to display the VCR MAIN
MENU.
2. Press 6 to display the PREFERENCES menu.
3. Press 6 to select CA Playback: AUTO or MANUAL.
¥ Select AUTO to have the VCR automatically
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
advance through the blocks of marked
commercials.
It works with most 30, 45, and 60-second
commercials.
PREFERENCES
A commercial group starting within the first two
minutes or last two minutes of a recording will not
be automatically skipped.
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
ON
AUTO
ON
AUTO
BLUE
A commercial will not be skipped if the recording
starts in the middle of a commercial segment, one
isolated commercial is shown without others, or a
commercial is longer than one minute. Press FF to
scan through the commercial.
It is possible that part of a recorded program
might be skipped if the program segment is
between commercials and less than one minute or
there are frequent dark and quiet scenes. If part of
the program is skipped, rewind the tape to the
beginning of the skipped program segment and
press PLAY.
¥ Select MANUAL and the VCR will not advance
through the blocks of marked commercials until
you press SEARCH.
The VCR will resume playback when it reaches the
end of the marked commercials.
If you press SEARCH during playback of material
other than commercials, the VCR will still advance
to the end of the next ÒmarkedÓ commercial block
and resume playback.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Types of Recordings
Your VCR provides different types of recording. These types are explained in the following sections:
Basic Recording Ð Operating Instructions
Recording While You're Away
VCR Plus+ Recording
Timer Recording
Express (XPR) Recording
Recording Broadcast Stereo TV or SAP (Second Audio Program)
Recording Audio Only
Using Two VCRs for Copying Tapes
Using the Recording Features
Recording Speeds
Press SPEED on the remote to select a recording speed (SP, LP, or SLP). The speed
you select appears on the TV screen and in the VCRÕs display panel. The VCR
automatically selects the playback speed (SP, LP, or SLP).
Cassette
Type
Recording Time
SP
LP
SLP
T120
2Hr
4Hr
6Hr
T160
2Hr 40Min 5Hr 20Min 8Hr
SP (Standard Play) gives the best quality recording.
That is why most prerecorded, rental tapes are
recorded in SP. Fewer programs can be recorded on
the tape. Special effects such as pause, slow motion,
picture search, and frame advance work well.
LP (Long Play) gives twice the recording time of tapes
recorded in SP. Special effects in playback are not
recommended in LP.
SLP (Super Long Play) gives three times the recording
time of tapes recorded in SP. Special effects such as
pause, slow motion, picture search, and frame
advance work well.
Recording Pause
This feature allows you to prevent recording short passages of unwanted material.
Press PAUSE during recording to stop and start
recording. REC P appears in the VCRÕs display
panel.
The VCR will automatically switch from pause to
stop after a few minutes.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Basic Recording – Operating Instructions
To Make a Recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or TVÕs video input channel.
1. Insert a tape with safety tab in place.
The cassette-in indicator (
panel.
lights in the VCRÕs display
)
2. Press VCR1 (VCR2•DVD) to set remote to control VCR.
3. If using one of the basic hookups, make sure the VCR
indicator appears in the VCRÕs display panel. If not,
press TV•VCR to turn it on.
4. Select recording speed using SPEED on the remote.
The tape speed indicator appears in the VCRÕs display
panel and on the TV screen.
5. Select the channel to be recorded.
The channel number appears in the VCRÕs display panel
and on the TV screen.
6. Press RECORD on the VCR or REC on the remote to
begin recording. REC appears in the VCRÕs display panel
while the VCR is recording.
Watch a TV Channel While VCR is Recording a
Different Channel
1. Follow steps 1 through 6 above.
2. If using one of the basic hookups, press TV•VCR to switch
to the TV channel. The VCR indicator will turn off in the
display panel.
3. Press TV to set the remote to control TV functions for a
compatible TV.
4. Select the channel you want to watch with the TVÕs
channel buttons.
5. Press STOP when recording is finished.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (VCR Plus+* Recording)
VCR Plus+ Setup for Antenna, Unscrambled Cable Systems (Not
Requiring a Cable Box), or Cable Box VCR Can Control
A VCR Plus+ channel number is assigned for each broadcast or cable channel. These
numbers are listed in most publications that list PlusCode* numbers.
1. Prepare the worksheet on the opposing page for the
VCR Plus+ channels that are different than the
channels you receive them on. Refer to the chart
below for standardized VCR Plus+ channel numbers.
Broadcast or Cable-TV
Station Name
VCR Plus+
Channel Number
Channel Number You
Receive This Station On
HBO
ESPN
ABC
FOX
33
See Note 1
See Note 1
See Note 1
See Note 1
34
See Note 2
See Note 2
Note 1: Check your local or cable listing for the channel number you receive this station on.
Note 2: Check your local listing for the broadcast or VCR Plus+ channel number assigned to this station.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
2. Press MENU•PROG on the remote to display the
VCR MAIN MENU on the TV screen.
4 Channels
3. Press 4 to display CHANNELS menu.
4. Press 4 to display VCR Plus+ Channel List menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable box Setup
5. Using your worksheet, press two numbers to enter
each channel number you receive on a different
channel than the assigned VCR Plus+ channel
number.
6 DSS Setup
0 Exit
Press CHAN up or down to move the numbers up
or down on the menu.
Press CLEAR on the remote to erase a number.
VCR+ Channel My Channel
5
4
--
--
6. Press MENU•PROG when you are finished.
3 -> -> -> --
Auto channel search must be performed before
setting the VCR Plus+ channel list.
2
1
--
--
Use CHAN up/dn to select
Press 0-9 to change
Press MENU to exit
Standardized VCR Plus+ Channel Numbers for Cable-TV
58 The Movie Channel
48 Music Television
49 The Nashville Network
38 Nickelodeon
65 MeteoMedia/The Weather Network
48 MuchMusic Network
55 MusiquePlus
52 Nashville Network
73 Newsworld/CBC
53 Le Reseau des Sports
43 The Sports Network
64 Super Ecran
37 Super Ecran B
98 Super Ecran C
66 Telatino Network
46 TV5 Montreal
92 Viewer's Choice 1
93 Viewer's Choice 2
94 Viewer's Choice 3
95 Viewer's Choice 4
71 Vision TV: Canada’s Faith Network
38 Youth TV, Canada Inc
U.S.A. List
Canadian List
35 American Movie Classics
39 Arts & Entertainment
57 Black Entertainment
54 Bravo
67 Allarcom Pay Television/Superchannel
44 Arts & Entertainment
72 Cable News Network-Headline News
61 Cable News Network
70 Canadian Home Shopping Network
56 Canal Famille
64 Nostalgia Television
99 Quality Value Cable
41 Showtime
42 Cable News Network
45 Cinemax
98 Cinemax 2
97 Showtime 2
69 Cathay International Television Inc
68 Chinavision Canada Corp
60 Country Music Television
63 Family Channel
59 Sports Channel
52 Turner Network Television
44 USA Network
37 The Discovery Channel
53 The Disney Channel
63 Entertainment Television
34 ESPN Sports Network
47 The Family Channel
33 Home Box Office
95 Home Box Office 2
96 Home Box Office 3
51 The Learning Channel
46 Lifetime
62 Video Hits 1
62 First Choice
93 Viewer’s Choice 1
94 Viewer’s Choice 2
55 WGN Chicago
96 First Choice Two
97 First Choice Three
99 First Choice Four
43 WTBS Atlanta
60 WWOR New York
90 House of Commons
91 La Chaine Francaise
51 The Learning Channel
*VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
TM
VCR Plus+ Channel Worksheet
Use this worksheet to create a list from which you can set up your VCR Plus+ channel list.
VCR Plus+
Channel Number*
Channel Number You
Receive This Station On**
Broadcast or Cable TV
Station Name
(See Standardized VCR Plus+ Channel Chart)
(Such as ABC, NBC, CBS, etc.)
*Check your local listing for VCR Plus+ channel numbers assigned to network stations.
**Check your local or cable listing for the channel numbers to enter in this column.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (VCR Plus+ Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to eight different programs within a one
year period. Before using VCR Plus+ to record a program, make sure that:
¥ The clock is set correctly.
¥ A tape with safety tab has been inserted with enough tape to record the programs.
¥ The remote is set to control the VCR Ñ using VCR1 (VCR2•DVD).
¥ The VCR is setup for VCR Plus+ programming.
¥ If you receive all channels through a cable box, setup the cable box as shown on pages 11-13.
¥ If you have an antenna, cable system not requiring a cable box, or a cable box this VCR can control, complete
VCR Plus+ setup on page 40.
Setting a VCR Plus+ Recording
1. Press MENU•PROG on the remote to display the VCR MAIN
MENU on the TV screen.
2. Press 1 to display the VCR PLUS+ menu.
VCR MAIN MENU
1 VCR Plus+
3. Press numbers on the remote to enter the PlusCode number
for the program you want to record. PlusCode numbers are
found in most local TV listings.
VCR PLUS+
Enter PlusCode number
(from TV listing)
Press CLEAR on the remote to correct an entry.
-
4. Press MENU•PROG to enter the program.
If the VCR does not recognize the PlusCode number,
Unrecognized number... Please re-enter appears on the TV
Press MENU to exit
screen. Check the number and enter it again.
5. Press 1, 2, 3, or 4 to select type of program.
1 One Time Ð single program recorded once.
How often should this
program record?
2 Daily Ð program recorded at same time every day.
3 Weekdays Ð program recorded at same
time Monday through Friday.
1 One Time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (Once per week)
4 Weekly Ð program recorded at same time
once a week.
Program 1 (One Time)
6. Select recording speed using SPEED on the remote.
Channel
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/18/96 Mon
Tape Speed SLP
1=SP 2=LP 3=SLP
08
7. Press CLEAR if you want to change the program end time.
This feature allows you to extend the recording time on VCR
Plus+ programs. This option may be useful when recording
programs such as sporting events that could go past
scheduled broadcast times.
Press CLEAR to correct
Press MENU to save
8. Press MENU•PROG to enter your program. A reminder
appears which will time out.
PROGRAMS OVERLAP may appear on the screen if you
entered two programs where the times overlap.
Program 1 has been saved
9. The TIMER RECORDINGS menu appears. Press 3 to enter
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
an additional VCR Plus+ program, or press 0 to exit.
10. Turn off the VCR before recording time.
TIMER appears in the VCRÕs display panel when the timer
has been programmed.
11. If using a cable box, leave it turned on. If the VCR cannot
control the cable box, tune it to the channel you want to
record.
Stopping a Recording in Progress
With the VCR: Press POWER and then STOP within a few
seconds.
With the Remote: Press VCR1 (VCR2•DVD) and then STOP
within a few seconds.
Note: Timer programs will not be erased during
power outages. To clear a program, see page 44.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (Timer Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to eight
different programs within a one year period. Before setting the timer, make sure that:
¥ The clock is set correctly.
¥ A tape with safety tab has been inserted with enough tape to record the programs.
¥ The remote is set to control the VCR Ñ using VCR1 (VCR2•DVD).
¥ If you receive all channels through a cable box or satellite receiver, setup the cable box
or satellite receiver on pages 11-13.
Setting a Timer Recording
VCR MAIN MENU
1. Press MENU•PROG on remote to display VCR MAIN MENU.
1 VCR Plus+
2 Timer Recordings
2. Press 2 to display TIMER RECORDINGS menu.
3. Press 1 to display Create a New Program menu.
TIMER RECORDINGS
4. Press 1, 2, 3, or 4 to select type of program.
1 Create a New Program
1 One Time Ñ single program recorded once.
How often should this
program record?
2 Daily Ñ program recorded at same time every day.
3 Weekdays Ñ program recorded at same
time Monday through Friday.
1 One Time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (Once per week)
4 Weekly Ñ program recorded at same time
once a week.
Program 2 (One Time)
5. Press number buttons on the remote to enter the channel
Channel
--
number (or INPUT to select line input), start time including
AM or PM, end time, and start date of the recording. Just
follow the on-screen prompts.
Program 2 (One Time)
Channel
08
Press CLEAR to correct an entry.
Start Time --:--
Channels with numbers less than 100 will record from the
cable box or antenna connection. Channels with numbers
100 and over will record from the corresponding DSS
channel.
Program 2 (One Time)
Channel
Start Time 02:10 AM 1=AM
End Time --:-- 2=PM
08
6. Select recording speed using SPEED on the remote.
Program 2 (One Time)
Channel 08
Start Time 2:10 PM
End Time 03:35 PM
7. Press MENU•PROG to enter your program. A reminder
appears which will time out or you can press MENU•PROG
to return to the VCR MAIN MENU.
Start Date 11/18/96 Mon
Tape Speed SLP
PROGRAMS OVERLAP may appear on the screen if you
have entered two programs where the times overlap.
1=SP 2=LP 3=SLP
Press CLEAR to correct
Press MENU to save
8. The TIMER RECORDINGS menu appears. Press 1 to enter
an additional timer program, or press 0 to exit.
Program 2 has been saved
9. Turn off the VCR before recording begins.
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
TIMER appears in the VCRÕs display panel when the timer
has been programmed.
10. If using a cable box, leave it turned on. If the VCR cannot
control the cable box, tune it to the channel you want to
record.
Stopping a Recording in Progress
With the VCR: Press POWER and then STOP within a few
seconds.
With the Remote: Press VCR1 (VCR2•DVD) and then STOP
within a few seconds.
Note: Timer programs will not be erased during
power outages. To clear a program, see page 44.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away
Check, Edit, or Clear a VCR Plus+ or Timer Recording
1. Press MENU•PROG on remote to display VCR MAIN
VCR MAIN MENU
1 VCR Plus+
MENU on TV screen.
2. Press 2 to display the TIMER RECORDINGS menu.
3. Press 2 for Review Existing Progs. feature.
The first program in the timer is displayed.
2 Timer Recordings
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
¥ Check the Programs: Press MENU•PROG to display
information for the next program.
Program 1 (One Time)
¥ Edit the Program: Press DISPLAY to edit the program.
The frequency menu appears first so you can change
how often you want to record the program.
Channel
Start Time 02:10 PM
End Time 03:35 PM
08
Start Date 11/18/96 Mon
Tape Speed SLP
Press DISPLAY to edit
Press CLEAR to delete
Press MENU for next prog
How often should this
program record?
1 One Time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (Once per week)
0 Cancel
Press a number button to select the type of program you
want to record.
Program 2 (One Time)
Channel
Start Time 2:10 PM
End Time 03:35 PM
08
Start Date 11/18/96 Mon
Tape Speed SLP
Press CLEAR to correct
Press MENU to save
Edit the rest of the program using the CLEAR and
number buttons.
¥ Clear the Program: Press CLEAR when the program
appears.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
AUDIO and VIDEO IN jacks of the VCR. Recording
from the line input is convenient if you have a satellite
receiver or similar component attached to these jacks.
To timer record from the component connected to the
VCRÕs line input:
Program 1 (One Time)
Channel
Start Time --:--
End Time --:--
VIDEO1
Start Date --/--/--
Tape Speed SLP
Press CLEAR to correct
Press MENU to exit
Press INPUT to enter the channel number when you
program the timer. Enter VIDEO1 to record from the
jacks on the back of the VCR or VIDEO2 to record from
the jacks on the front of the VCR.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Express Recording (XPR)
Express recording lets you record up to four hours without using the timer program feature. The VCR will
turn off automatically at the end of the recording.
POWER
EJECT
PLAY
STOP
PAUSE
RECORD
VCR
SLP
H
M
Display showing 30
minutes remaining for
express recording.
RECORD
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on
the remote.
5. Press RECORD twice on the VCR or REC twice on
the remote to activate express recording.
6. Repeatedly press RECORD on the VCR or REC on
the remote until the amount of recording time for
the program is displayed in the VCRÕs display panel
or on the TV screen.
Press
RECORD
Recording
Time
0:30
1:00
1:30
2:00
3:00
4:00
(30 Min)
(1 Hr)
RECORD LENGTH 0:00
CH 04
PWR
REW
TV
PLAY
FF
(1 Hr, 30 Min)
(2 Hrs)
REC
STOP
PAUSE
Press REC to set length
C
(3 Hrs)
(4 Hrs)
Express Display on
TV Screen
(Normal Recording)
(Stops)
0:00
Each press increases the time Ñ 30 minutes up to four
hours.
The amount of time the VCR will record and X– REC
will appear in the VCRÕs display panel.
You can increase the amount of recording time by
pressing REC on the remote or RECORD on the VCR.
Stopping a Recording in Progress
With the VCR: Press POWER and then STOP
within a few seconds.
With the Remote: Press VCR1 (VCR2•DVD) and
then STOP within a few seconds.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording Broadcast Stereo TV or SAP
(Second Audio Program)
Some TV programs are broadcast with stereo audio or a second audio language (SAP).
The Reception: STEREO/MONO/SAP feature lets you select the type of audio you want
to record.
To Record Stereo Broadcast TV or SAP
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or TVÕs video input.
1. Insert a tape with safety tab in place.
2. If using one of the basic hookups, make sure the VCR
indicator appears in the VCRÕs display panel. If not,
press TV•VCR to turn it on.
3. Use SPEED on the remote to select a recording speed.
The tape speed indicator appears in the VCRÕs display
panel and on the TV screen.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4. Select the channel or line input to be recorded.
4 Channels
5 Setup
The channel number, VIDEO1, or VIDEO2 appears on the
TV screen.
6 Preferences
7 Language/Langue
8 Audio
5. Set the Reception: STEREO/MONO/SAP feature for the
AUDIO
type of audio you want to record.
1 Reception:
STEREO
A. Press MENU•PROG to display the VCR MAIN MENU
2 Tape Playback: HI-FI
on the TV screen.
B. Press 8 to display the AUDIO menu.
C. Press 1 to select the type of audio Reception: STEREO,
0 Exit
MONO, or SAP.
¥ Set to STEREO for normal recording and to record
broadcast stereo TV.
The STEREO indicator lights in the VCRÕs display
panel when the station you are tuned to is
broadcasting stereo.
¥ Set to MONO if the stereo signal is weak and the
sound is too ÒnoisyÓ.
¥ Set to SAP to record SAP (second audio program)
instead of the main audio on the linear track. The
main (or normal) audio will still be recorded on the
hi-fi tracks.
The SAP indicator ( ) lights in the VCRÕs display
panel.
Set the Tape Playback: HI-FI/LINEAR/MIX feature to
LINEAR to hear SAP. Details are on page 27.
D. Repeatedly press 0 to remove the menus from the TV
screen.
6. Press REC on remote or RECORD on the VCR to start
recording. REC appears in the VCRÕs display panel.
7. Press STOP when you are finished.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording Audio Only
You can record audio only from another audio source connected to the AUDIO IN (L MONO and R) jacks on the back or front of
the VCR. Any video on the tape will be erased when you record audio only.
To Record Audio Only
1. Press the INPUT button to select a line input.
Press INPUT once to record from the back
AUDIO IN jacks. L1 appears in the VCRÕs
display panel.
VCR MAIN MENU
Press INPUT twice to record from the front
AUDIO IN jacks. L2 appears in the VCRÕs
display panel.
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
The VCR will record audio from the audio
equipment connected to the AUDIO IN jacks.
6 Preferences
7 Language/Langue
8 Audio
2. Use SPEED on the remote to select the
AUDIO
recording speed.
1 Reception:
2 Tape Playback: HI-FI
STEREO
The tape speed indicator appears in the VCRÕs
display panel.
3. Make sure the Reception: STEREO/MONO/SAP
feature is set to STEREO.
0 Exit
A. Press MENU•PROG to display the VCR
MAIN MENU on the TV screen.
B. Press 8 to display the AUDIO menu.
C. Press 1 to select Reception: STEREO.
4. Start audio source playing and press REC on
remote or RECORD on the VCR to begin
recording.
REC appears in the VCRÕs display panel.
5. Press STOP when you are finished.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Using Two VCRs for Copying and Editing Tapes
Operating Instructions (Refer to hookup on page 8.)
Use this VCR as the playback VCR and the other as the recording VCR. If you have two compatible VCRÕs, use the
AutoEdit feature described below.
1. Turn on the TV and VCRs.
2. Tune TV to the VCR viewing channel, either 3, 4, or TVÕs
video input.
Caution: The unauthorized
recording of television
3. If you have connected your VCR using Option A (page 8),
tune recording VCR to channel 3 or 4 Ñ the one selected on
the back of the playback VCR.
programs and other
materials may infringe the
rights of others.
If you have connected your VCR using Option B (page 8),
press INPUT on recording VCR to select the line input.
Select L1 to record from the jacks on the back or L2 to
record from the jacks on the front.
4. Insert the tape you want to copy into playback VCR. Insert
a blank tape with safety tab in place into recording VCR.
To prevent recording on-screen displays from the playback
VCR, press DISPLAY four times. See page 34 for details.
5. Press PLAY, then PAUSE on playback VCR when you reach
the point on the tape or program where you want to begin
copying. If the tape was not recorded on the playback
VCR, streaks may appear and you may need to adjust
tracking.
6. Press RECORD, then PAUSE, on recording VCR.
7. Press PAUSE buttons on both VCRs at the same time to
begin copying the tape.*
8. Edit out segments that you do not want to copy by pressing
PAUSE on recording VCR to stop copying the tape. Then
locate the next segment you want to copy on the playback
VCR by using FWD, REW, and PLAY. Press PAUSE on the
playback VCR. Press PAUSE at the same time on both
VCRs to resume copying.
9. Press STOP on both VCRs when you are finished.
* You may turn off the TV after the recording has started as it
does not have to be on to copy a tape.
Using Dual Remote with AutoEditTM
Use this VCR as the playback VCR and set it to respond to VCR2•DVD on the remote as
described on page 22. Use your other compatible VCR as the recording VCR, which should
respond to VCR1.
1. Follow steps 1 – 4 in the ÒOperating InstructionsÓ above.
2. Press VCR1 on remote to control recording VCR. Press
RECORD, then PAUSE, to put recording VCR in pause
mode.
3. Press VCR2•DVD on remote to control playback VCR.
4. Use FF, REW, and PLAY to locate the point where you want
to begin copying. Press PAUSE while VCR is playing to
put playback VCR in pause mode.
5. Press EDIT on remote to start the VCRs copying.
6. Press EDIT again when you want to stop the tape from
copying.
7. Repeat steps 4 – 6 as needed.
8. Press VCR1, STOP, then VCR2•DVD, STOP, when you are
finished.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Front Panel
POWER
PLAY
STOP
VIDEO IN
Tape Compartment
EJECT
CHANNEL
PAUSE
RECORD
INPUT
M
O
N
O
L
TV • VCR
R
AUDIO IN
TRACKING
Control Door
Open
Remote Sensor
POWER
AUDIO IN L•MONO and R Jacks
Turns the VCR on or off.
Receives audio signals from another
component, like a VCR or camcorder
when it is connected to these jacks.
RECORD
Starts VCR recording.
Used for express recording (XPR).
Attach a component that is not stereo to
the L•MONO jack to hear sound on both
channels.
Select L2 to record from these jacks.
Remote Sensor
Receives signals from the remote control.
Aim the remote at this sensor with no
objects between them.
CHANNEL/TRACKING Up or Down
Selects next higher or lower channel in
the VCRÕs channel memory.
Shuttle Dial
Adjusts tracking when a tape is playing.
Rewinds and fast forwards the tape when
the VCR is stopped.
EJECT
Plays the picture in variable-speed slow
motion during play pause.
Press when the VCR is stopped to eject
the cassette.
Searches the picture in forward and
reverse during playback.
INPUT
Turns the line input on or off. L1 or L2
appears in VCRÕs display panel and
VIDEO1 or VIDEO2 appears on the TV
screen.
STOP
Stops the normal functions such as record,
playback, rewind, fast-forward, or pause.
Line input refers to the signal coming
from the component connected to the
audio/video input jacks on the back (L1)
or front of the VCR (L2).
TV•VCR
Switches the picture signal so that it either
comes from the VCR or the TV channel.
See page 18.
PAUSE
VIDEO IN Jack
Pauses action for viewing during
playback.
Receives video signals from another
component, like a VCR or camcorder,
when it is connected to this jack.
Pauses recording to prevent recording of
unwanted scenes.
Select L2 to record from this jack.
PLAY
Plays a tape.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Back Panel
IN
FROM
MONO
L
ANTENNA
L
VIDEO
R
R
OUT
TO
TELEVISION
IN
OUT
IN
OUT
CH
3
4
AUDIO
VIDEO and AUDIO (R and L MONO) IN Jacks
CH3 CH4 Switch
Receives signals from another component, like
a VCR or camcorder, when it is connected to
these jacks. Use INPUT to select L1 in the
VCRÕs display panel.
Selects the channel to which you will tune the TV
to see the VCR picture if you connect the VCR
using one of the basic hookups.
Attach a component that is not stereo to the
L•MONO jack to hear sound on both channels.
IN FROM ANTENNA Connector
Receives the signal from an antenna, cable system,
or satellite system that is attached to this connector.
VIDEO and AUDIO (R and L) OUT Jacks
OUT TO TELEVISION Connector
Passes signal to TV using the cable supplied.
Sends signals from VCR to another component,
like a TV monitor or VCR, when it is connected
to these jacks.
Display Panel
This VCR has a feature where you can change the brightness level of the fluorescent
display panel.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
1. Press MENU•PROG on the remote to see the VCR MAIN
5 Setup
MENU on the TV screen.
6 Preferences
PREFERENCES
2. Press 6 to display the PREFERENCES menu.
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 Front Panel:
5 CA Marking:
6 CA Playback:
7 CA Display:
8 Set Auto Repeat
0 Exit
ON
3. Press 4 to select Front Panel: AUTO, BRIGHT, or DIM.
ON
AUTO
ON
AUTO
BLUE
¥ Select AUTO to keep the display panel bright when VCR
is on and dim when it is off.
¥ Select BRIGHT to keep the display panel bright.
¥ Select DIM to keep the display panel dim.
continued on next page
50
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Display Panel (continued)
Tape Speed
Indicator
Channel Number or
Line Indicator
Cassette-in Indicator
SAP
Indicator
HIFI
VCR
SLP
STEREO
AM
Time or Time Counter
Status Indicators
REC P
Record pause
Rewind
Cassette-in Indicator (
Lights when a tape is in the VCR.
)
REW
Forward search
Reverse search
Slow motion
Frame advance
Play pause
SRCH +
SRCH –
SLOW +/–
Channel Number or L1or L2
The channel number or line input is displayed.
Select L1 to record from the jacks on the back of the
VCR or L2 to record from the jacks on the front of
the VCR.
STILL
STILL
STOP
VCR stopped
TAPE flashes Set for timer Ð no tape
HIFI Indicator
TIMER
X-REC
Timer recording set
Lights during hi-fi playback when Tape Playback:
HI-FI/LINEAR/MIX feature is set to HI-FI.
Express recording in progress
STEREO Indicator
SAP Indicator (
)
Lights when the station you are tuned to is
broadcasting stereo.
Lights when the Reception: STEREO/MONO/SAP
feature is set to SAP.
Tape Speed Indicators (SP, LP, or SLP)
Press SPEED to change.
Status Indicators
Show what the VCR is doing.
BYE
Turned off
Time or Time Counter
COMM
/MARK
EJECT
FFWD
HELLO
MARK 30
PLAY
Press DISPLAY to switch between the current time
and time counter.
CA marking in progress
Ejecting tape
Fast forward
VCR Indicator (Applies Only to Basic Hookups)
Press TV•VCR to turn on or off.
Turned on or unlocked
Marking process countdown
Playback
VCR indicator on: Picture from VCR.
VCR indicator off: Picture from TV channel.
REC
Record
51
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Specifications
Format:
VHS
Record/Playback
Video: 4-Head
System:
Audio: 2 Hi-Fi record/playback system
Video Signal System:
Antenna:
EIA standard: NTSC color
75-ohm external VHF/UHF combined
antenna terminal
Tuner:
USA:
181 channels capability*
(125 cable channels)
Canada: 178 channels capability*
(122 cable channels)
Type:
Autoprogramming frequency synthesis
120V AC, 60 Hz
Power Requirement:
Power Consumption:
Dimensions:
22 watts
3.5 inches high
(90 mm)
15.5 inches wide
(393 mm)
12.5 inches deep
(318 mm)
Weight:
Other:
9.3 pounds
(4.2 kg)
Automatic Head Cleaner
Storage Temperature
Range:
- 22 F (- 30 C) to +149 F (+65 C)
û
û
û
û
Operating
Temperature Range:
+41 F (+5 C) to +104 F (+40 C)
û
û
û
û
*Check your cable companyÔs compatibility requirements.
Cleaning the VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to dust your
VCR. Remove dust from the ventilation holes on the top, back, sides, and
bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the materials
used in the cabinet will accumulate more dust. We recommend using a non-
abrasive, anti-static cleaner and polisher.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Limited Warranty
What your warranty covers:
¥
Any defect in material or workmanship.
For how long after your purchase:
¥
Ninety days for labor charges.
¥
One year for parts.
The warranty period for rental units begins with the first rental or 45 days
from the date of shipment to the rental firm, whichever comes first.
What we will do:
¥
¥
Pay any Authorized RCA VCR Servicenter the labor charges to repair
your VCR.
Pay any Authorized RCA VCR Servicenter for the new or, at our option,
refurbished replacement parts required to repair your VCR.
How you get service:
¥
Take your VCR to any Authorized RCA VCR Servicenter. To identify
your nearest Authorized RCA VCR Servicenter, ask your dealer, look in
the Yellow Pages, or call 1-800-336-1900.
¥
¥
Show the service technician your evidence of purchase date.
Pick up your VCR when repairs are completed.
What your warranty does not cover:
¥
Customer instruction. (Your OwnerÕs Manual clearly describes how to
install, adjust, and operate your VCR. Any additional information should
be obtained from your Dealer.)
¥
¥
¥
¥
¥
¥
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/audio heads.
Remote control batteries.
A VCR that has been modified or incorporated into other products or is
used for institutional or other commercial purposes.
¥
¥
A VCR purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
¥
Please complete and mail the Product Registration Card packed with
your VCR. It will make it easier to contact you should it ever be
necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
¥
This warranty gives you specific legal rights, and you also may have
other rights that vary from state to state.
If you purchased your VCR outside the United States:
¥
This warranty does not apply. Contact your dealer for warranty
53
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Sometimes problems can be easily solved by checking a few basic things. Check below before you call for help or
take your VCR to an Authorized RCA VCR Servicenter.
Trouble
Here's what to try:
¥ Plug VCR into an operating outlet.
¥ Check connections.
No power
¥ Make sure time zone and daylight savings information is entered correctly.
See page 14.
¥ If auto clock set is off by a few minutes, station may be sending inaccurate
time information.
¥ Clock was not set accurately (check AM/PM and date).
¥ Time counter display appears in display panel. Press DISPLAY on remote.
Clock shows incorrect time or date
VCR does not respond to remote
¥ Press VCR1 (VCR2•DVD) to set remote to control the VCR. See page 22.
¥ VCR2•DVD button may be set to control a DVD. See page 22 to change back
to VCR2.
¥ Aim remote at VCR with no objects between them.
¥ Remove batteries and hold down one or more buttons for several seconds to
drain the microprocessor inside the remote to reset it. Reinstall the batteries
and try remote again.
¥ Change batteries.
¥ Press TV to set remote to control the corresponding compatible TV. See page 23.
¥ Reprogram remote for RCA TV. See page 23.
Remote no longer controls an RCA TV
¥ Aim remote at TV with no objects between them.
¥ Change batteries.
¥ Remove batteries and hold down one or more buttons for several seconds to
drain the microprocessor inside the remote to reset it. Reinstall the batteries
and try remote again.
¥ Press TV, AUX, VCR2•DVD or SAT•CABLE to set remote to control a
compatible component. See pages 22-25.
Remote no longer controls a compatible TV, cable
box, satellite receiver, or auxiliary component
¥ Aim remote at component with no objects between them.
¥ Reprogram remote after batteries have been changed.
¥ Reprogram VCR2•DVD button to 000 to operate compatible satellite receiver.
¥ Change batteries.
¥ Remove batteries and hold down one or more buttons for several seconds to
drain the microprocessor inside the remote to reset it. Reinstall the batteries
and try remote again.
¥ Check setting of Remote Control: VCR1/VCR2 feature. See page 22.
VCR only responds to VCR2•DVD button on
remote
¥ Press TV•VCR to turn VCR indicator on. See page 18.
¥ Check to see if Auto TV/VCR feature is set to OFF. See page 19.
No picture when VCR turned on Ð using a basic
hookup
¥ Press TV•VCR to turn VCR indicator off.
¥ Switch TV to an active channel.
¥ Check antenna connections.
Poor or no picture for normal TV viewing
¥ Press TV•VCR to turn VCR indicator on.
¥ Check TV channel selected (3 or 4) to make sure it matches the channel
selected with CH3 CH4 switch on back of VCR.
¥ Check TVÕs fine tuning.
Snowy or no picture during playback
¥ Check video cable connections between VCR and TV monitor.
¥ Set TV monitor to video input channel.
¥ Try another tape.
¥ Some snow/streaks are normal during search, frame advance, slow-motion,
or stop-action playback.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Trouble
Here's what to try:
¥ The time counter does not advance during unrecorded portions of tape.
When an unrecorded segment of tape is encountered, the time counter will
hold its count until recorded material is detected again.
Time counter not working
¥ A minus (Ð) will appear in front of the time if you rewind the tape farther
back than a counter reading of 0:00:00.
¥ No cassette in VCR.
Will not record or play
¥ Eject and re-insert cassette.
¥ Broken tape Ñ try another cassette.
¥ Some snow/streaks are normal during search, frame advance, slow-motion,
or stop-action playback.
Streaks in picture during normal playback
¥ Tape already rewound.
Rewind does not operate
Will not record
¥ VCR is in pause mode. Press PAUSE.
¥ Safety tab removed from cassette.
¥ Make sure the line indicator (L1) or (L2)is turned off in VCRÕs display panel
for normal recording from the VCRÕs tuner. Press INPUT to turn off the line
indicator.
¥ Wrong PlusCode number entered.
¥ Cable box or satellite receiver was not turned on at time recording was to
begin.
VCR Plus+ or timer recording not made
or wrong program recorded
¥ Program entered incorrectly (wrong channel or times).
¥ Power interruption. Clock area in display panel will show - -:- -.
¥ Check to see if time and date are correct Ñ including AM/PM.
¥ Program exceeded tapeÕs length or tape was not rewound beforehand.
¥ VCR was not turned off at the time recording was to start.
¥ No tape in VCR or cassetteÕs safety tab broken off.
¥ VCR is removing tape from heads. This is normal. The head cylinder inside
the VCR will continue to rotate for a few minutes after you put the VCR in the
stop mode.
VCR makes noise when stopped
¥ Check antenna connections.
¥ Check Signal Type: CABLE/ANTENNA feature. See page 17.
Will not auto search active
channels correctly
¥ Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA
Cannot select channels over 69
feature is set to CABLE. Details are on page 17.
¥ Set Auto Play ON/OFF feature to ON. Details are on page 27.
Cassette with safety tab removed does not start to
play automatically
¥ Press the remote buttons within a few seconds of each other or the light will
turn off to conserve battery power. Details are on page 28.
Remote controlÕs backlighting does not stay on
Stereo or SAP sound not recorded
¥ Reception: STEREO/MONO/SAP feature must be set to STEREO to record
broadcast stereo. See page 46.
¥ Reception: STEREO/MONO/SAP feature must be set to SAP to record SAP on
the linear track. See page 46.
¥ STEREO indicator not on. Station not broadcasting stereo or SAP.
(continued on next page)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Trouble
Here's what to try:
No stereo sound during playback
Stereo audio too noisy
¥ Tape Playback: HI-FI/LINEAR/MIX feature must be set to HI-FI to hear stereo
sound during playback. See page 46.
¥ Must use advanced hookups for stereo playback. See pages 3-7.
¥ Stereo signal is weak. Set Reception: STEREO/MONO/SAP feature to MONO.
¥ Press one of the TRACKING up or down buttons to minimize the noise.
VCR forwards through commercials or
momentarily displays a blue screen during
playback
¥ COMMERCIAL ADVANCEª CA Playback feature set to AUTO.
See pages 30-31.
VCR forwards through a rental or pre-recorded
tape displaying a blue screen
¥ Some tapes use special control track marking. Set the
COMMERCIAL ADVANCEª CA Playback feature, in the PREFERENCES
menu to MANUAL.
COMMERCIAL ADVANCEª feature does
not mark commercials
The commercial advance feature does not mark commercials under the following
situations:
¥ CA Marking: ON/OFF feature set to OFF. See pages 36-37.
¥ Recording is less than 15 minutes.
¥ A single isolated commercial cannot be marked.
¥ Recording started in the middle of a commercial segment.
¥ The commercial is longer than one minute.
¥ A commercial group within the first or last two minutes of a recording.
¥ It does not mark commercials between 30-and-45 seconds and 45-and-60
seconds.
¥ Accuracy and effectiveness can vary depending upon program content and
the characteristics of the commercials.
¥ Effectiveness may vary when local television stations insert their own
commercials.
Commercials recorded even though
COMMERCIAL ADVANCEª feature was
turned on.
¥ COMMERCIAL ADVANCEª is designed to record the commercials, mark
56
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Questions & Answers About COMMERCIAL ADVANCE™
Question
Answer
Will commercials be scanned through only on
playback of recordings?
Yes. The VCR does not rewind and mark commercial segments until after
recording is finished.
How fast does the COMMERCIAL ADVANCE™
VCR scan through the commercial breaks?
In SLP tape speed, a 3-minute commercial break is scanned through in
approximately 8-12 seconds. In SP, it takes about 25-35 seconds.
Are commercials still recorded if I want to watch
them?
Yes. The recorded program, including commercials, can be viewed by setting
the CA Playback feature to MANUAL.
What if the VCR scans forward through part of my
program?
Simply rewind the tape to just before the skipped segment, and press PLAY to
view the program.
Once a recording has been marked, does
COMMERCIAL ADVANCE™ work each time
the tape is played?
Yes. If the CA Playback feature is set to AUTO, the marked commercials
should be skipped each time the tape is played in a
COMMERCIAL ADVANCEª VCR.
After marking commercials, is the tape left at the
beginning or end of the recording?
The tape is left at the end of the recording so it is in position to begin
additional programmed recordings.
Does the marking process interfere with other
programmed recordings?
No. If two or more recordings are programmed together without sufficient
time to mark the first recording, marking will take place after all recordings
have completed.
What happens if the marking process is interrupted?
Marking can be interrupted to allow use of the VCR. Marking will resume
again when the VCRÕs power is turned off as long as the tape has not been
ejected from the VCR.
Does COMMERCIAL ADVANCE™ work in all
recording speeds?
Yes, COMMERCIAL ADVANCEª works in SP, LP, and SLP.
Will COMMERCIAL ADVANCE™ marked
recordings work in non-
COMMERCIAL ADVANCE™ VCRs?
A COMMERCIAL ADVANCEª marked recording will play in a non-
COMMERCIAL ADVANCEª VCR, but commercials will not automatically
be skipped.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
Checks, Trouble . . . . . . . . . . . . . . . . . . . . . .54-56
Choisissez une Langue . . . . . . . . . . . . . . . . . . .18
Choosing a Hookup . . . . . . . . . . . . . . . . . . . . . . .2
Cleaning the VCR . . . . . . . . . . . . . . . . . . . . . . .52
CLEAR Button . . . .11,20-21,28,32,33,35,40,43,44
Clearing Timer and VCR Plus+ Programs . . .44
Clock Set, Manual . . . . . . . . . . . . . . . . . . . . . . .15
Code, LaserDisc Player . . . . . . . . . . . . . . . . . . .22
Code, VCR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Code, DVD Component . . . . . . . . . . . . . . . . . .22
Codes, Cable Box . . . . . . . . . . . . . . . . . . . . . . . .24
Codes, RCA Auxiliary Components . . . . . . . .25
Codes, Satellite Receivers . . . . . . . . . . . . . . . . .24
Codes, TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
COMM/MARK Indicators . . . . . . . . . . . . . . .36,51
COMMERCIAL ADVANCEª
— A —
Accessories, Included . . . . . . . . . . . . . . . . . . . . .9
Add or Remove Channels from
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
ADD/REMOVE CHANNEL Menu . . . . . . . . . . .17
Antenna Connections . . . . . . . . . . . . . . . . . . . .2,3
Arrow Buttons . . . . . . . . . . . . . . . . . . . . .10,20-21
Attaching Power Cord . . . . . . . . . . . . . . . . . . . .9
AUDIO/VIDEO IN/OUT
Jacks . . . . . . . . . . .3-8,12,27,44,46,47,48,49,50
Auto Channel Search Feature . . . . . . . . . . . . .14
Auto Clock Set: ON/OFF Feature . . . . . . . .14-15
Auto Play: ON/OFF Feature . . . . . . . . . . . .26,28
Auto Repeat Feature . . . . . . . . . . . . . . . . . . . . .28
AUTO REPEAT Menu . . . . . . . . . . . . . . . . . . . .28
Auto TV/VCR: ON/OFF Feature . . . . . . . . .19,26
AutoEdit Feature . . . . . . . . . . . . . . . . . . . . . . . .48
Automatic Tracking . . . . . . . . . . . . . . . . . . . . . .31
AUX (Auxiliary) Button . . . . . . . . . . . . . . . .20,25
Feature . . . . . . . . . . . . . . . . . . . . . . . . . . .36-37
COMMERCIAL ADVANCEª,
Questions and Answers . . . . . . . . . . . . . . .57
COMMERCIAL ADVANCEª,
Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Connections
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,3
Cable System With Cable Box . . . . . . . .2,4-5
Cable System Without Cable Box . . . . . .2,3
Satellite Receiver . . . . . . . . . . . . . . . . . . .2,6-7
VCRs for Copying Tapes . . . . . . . . . . . . . .2,8
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Controlling With Remote
Auxiliary RCA Component . . . . . . . . . . . .25
Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DVD Component . . . . . . . . . . . . . . . . . . . . .22
LaserDisc Player . . . . . . . . . . . . . . . . . . . . .22
Satellite Receiver . . . . . . . . . . . . . . . . . . . . .24
TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
VCR, Compatible . . . . . . . . . . . . . . . . . . . . .22
Copying and Editing Tapes . . . . . . . . . . . . . . .48
Copying Tape, Connections . . . . . . . . . . . . . . . .8
— B —
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8,50
Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . .39
Batteries, Inserting in Remote . . . . . . . . . . . . . .9
Blank Search Feature` . . . . . . . . . . . . . . . . . . . .33
BLANK SEARCH Menu . . . . . . . . . . . . . . . . . .33
Brightness, Front Panel . . . . . . . . . . . . . . . . . . .50
Broadcast Stereo, Recording . . . . . . . . . . . . . . .46
BYE Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .51
— C —
CA Display: BLUE/VIDEO Feature . . . . . . . . . .37
CA Marking: ON/OFF Feature . . . . . . . . . . . . .36
CA Playback: AUTO/MANUAL Feature . . . . .37
CABLE BOX SETUP Menu . . . . . . . . . . . . . . .12
Cable Box Codes . . . . . . . . . . . . . . . . . . . . . .13,24
Cable Box Function Buttons on Remote . . . . .21
Cable System With Cable Box
— D —
Design Specifications . . . . . . . . . . . . . . . . . . . . .52
DISPLAY Button . . . . . . .20-21,28,34,35,44,48,51
Display Panel . . . . . . . . . . . . . . . . . . . . . . . .50-51
Displaying Time Counter Only . . . . . . .34,35,51
Displays, Status . . . . . . . . . . . . . . . . . . . . . . .34,35
DSS SETUP Menu . . . . . . . . . . . . . . . . . . . . . . .11
Connections . . . . . . . . . . . . . . . . . . . . . . .2,3-5
Cable System Without Cable Box
Connections . . . . . . . . . . . . . . . . . . . . . . . . .2,3
Card, Registration . . . . . . . . . . . . . . . . . . . . . . . . .i
Cassette-In Indicator . . . . . . . . . . . . . . . .26,39,51
CH3 CH4 Switch . . . . . . . . . . . . . . . . . . . . .3-8,50
CHAN and CHANNEL•TRACKING
Buttons . . . . . . . . . . . . . . . . .17,18,20-21,40,49
Channel Number Indicator . . . . . . . . . . . . . . .51
CHANNELS Menu . . . . . . . . . . . . . . . . . .13,17,40
Checking Timer and VCR Plus+ Programs . .44
— E —
EDIT Button . . . . . . . . . . . . . . . . . . . . . . . . . .20,48
Editing and Copying Tapes . . . . . . . . . . . . . . .48
Editing Timer and VCR Plus+ Programs . . . .44
58
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
EJECT Button . . . . . . . . . . . . . . . . . . . . . .26,49,51
Express Recording . . . . . . . . . . . . . . . . . . . . . . .45
Express Recording, Stopping . . . . . . . . . . . . . .45
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . .53
Line Indicators (L1 and L2) . . . . . . . .47,48,50,51
Line Input, Recording From . . . . . . . . . . . . . . .44
Locking the VCR . . . . . . . . . . . . . . . . . . . . . . . .31
LP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .38,51
LP Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
— F —
F—FWD Indicator . . . . . . . . . . . . . . . . . . . . . . .51
F.ADV (Frame Advance) Button . . . . . . . . .20,30
Fast Forward Search . . . . . . . . . . . . . . . . . . . . .29
FF (Fast Forward)
Button . . . . . . . . . . . . . . . . . .20,29,32,33,35,48
First-Time Operation . . . . . . . . . . . . . . . . . . .9-19
Frame Advance . . . . . . . . . . . . . . . . . . . . . . . . .30
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Front Panel: AUTO/BRIGHT/DIM Feature . . .50
— M —
Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . .15
Manual Tracking . . . . . . . . . . . . . . . . . . . . . . . .31
MARK/COMM Indicators . . . . . . . . . . . . . . .36,51
MENU•PROG Button . . .10,11,12,13,14,17,18,19
. . . . . .20,22,27,28,36-37,40,42,43,44,46,47,50
MOVE Arrow Buttons . . . . . . . . . . . . . . . . .10,20
MUTE Button . . . . . . . . . . . . . . . . . . . . . . . . .20-21
— G —
— N —
Go-To Search Feature . . . . . . . . . . . . . . . . . . . .33
GO-TO SEARCH Menu . . . . . . . . . . . . . . . . . . .33
Number Buttons . . . . . . . . . . . .10,12,13,14,15,16
. . . . . . . . . . . . . . . .20-21,23,27,28,32,33,36-37
— H —
— O —
HELLO Indicator . . . . . . . . . . . . . . . . . . . . . .31,51
HIFI Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Hookup, Choosing . . . . . . . . . . . . . . . . . . . . . . . .2
Hookups
On-Screen Displays . . . . . . . . . . . . . . . . . . .34,35
On-Screen Menu System, Using . . . . . . . . . . .10
Operations
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,3
Cable System With Cable Box . . . . . . . .2,4-5
Cable System Without Cable Box . . . . . .2,3
Satellite Receiver . . . . . . . . . . . . . . . . . . .2,6-7
VCRs for Copying Tapes . . . . . . . . . . . . . .2,8
Checking Timer and VCR Plus+
Recordings . . . . . . . . . . . . . . . . . . . . . . . .44
Clearing Timer and VCR Plus+
Recordings . . . . . . . . . . . . . . . . . . . . . . . .44
Copying Tapes . . . . . . . . . . . . . . . . . . . . . . .48
Editing Timer and VCR Plus+
Recordings . . . . . . . . . . . . . . . . . . . . . . . .44
Express Recording . . . . . . . . . . . . . . . . . . . .45
First Time . . . . . . . . . . . . . . . . . . . . . . . . .9-19
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Playback Features . . . . . . . . . . . . . . . . .27-35
Recording Audio Only . . . . . . . . . . . . . . . .47
Recording Broadcast Stereo . . . . . . . . . . . .46
Recording SAP . . . . . . . . . . . . . . . . . . . . . . .46
Setting Up the VCR . . . . . . . . . . . . . . . . .9-19
Timer Recording . . . . . . . . . . . . . . . . . . . . .43
Using the Remote Control . . . . . . . . . .20-25
VCR Plus+ Recording . . . . . . . . . . . . . .40-42
OUT TO TV Connector . . . . . . . . . . . . . . . .3-8,50
— I —
IN FROM ANT. (Antenna) Connector . . . .3-8,50
Index Feature . . . . . . . . . . . . . . . . . . . . . . . . . . .32
INDEX SEARCH Menu . . . . . . . . . . . . . . . . . . .32
Information, Program . . . . . . . . . . . . . . . . . . . .35
INPUT Button . . . . . . . . . . . .20,43,44,47,48,49,50
— L —
L1 and L2 Indicators . . . . . . . . . . . . . .47,48,50,51
LANGUAGE Menu . . . . . . . . . . . . . . . . . . . . . . .18
Language, Select for Displays . . . . . . . . . . . . .18
LaserDisc Code . . . . . . . . . . . . . . . . . . . . . . . . . .22
LaserDisc Player, Controlling with Remote . .22
Light Button . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Light in Remote . . . . . . . . . . . . . . . . . . . . . . . . .20
59
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Types of . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
VCR Plus+ . . . . . . . . . . . . . . . . . . . . . . . .40-42
Registration Card . . . . . . . . . . . . . . . . . . . . . . . . .i
Remote Batteries, Inserting . . . . . . . . . . . . . . . . .9
Remote Control
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
Remote Control: VCR1/VCR2 Feature . . . . . .22
Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . .49
Remote, Light In . . . . . . . . . . . . . . . . . . . . . . . . .20
Remove or Add Channels from Memory . . . .17
REMOVE/ADD CHANNEL Menu . . . . . . . . . . .17
Removing Displays for Tape Editing
— P —
PAUSE Button . . . . . . . . . . . . . .20-21,29,38,48,49
Pause for Stop Action . . . . . . . . . . . . . . . . . . . .29
Pause, Recording . . . . . . . . . . . . . . . . . . . . . . . .38
Picture Search . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Play a Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
PLAY Button . . . . . . . . . . . . . . .20-21,26,29,30,49
PLAY Indicator . . . . . . . . . . . . . . . . . . . . . . .26,51
Playback, Basic . . . . . . . . . . . . . . . . . . . . . . . . . .26
Playback Sound, Selecting . . . . . . . . . . . . . . . .27
Point and Select Menu Feature . . . . . . . . . . . .10
POWER and PWR
Buttons . . . .20-21,22,23,24,25,31,42,43,44,49
Power Cord, Attaching . . . . . . . . . . . . . . . . . . . .9
PREFERENCES Menu . . . . . . .19,22,28,36-37,50
PREV CH (Previous Channel) Button . . . .20-21
Pro-Tect Plusª Feature . . . . . . . . . . . . . . . . . .31
Problems, Solving . . . . . . . . . . . . . . . . . . . . .54-56
Product Registration . . . . . . . . . . . . . . . . . . . . . .i
PROGRAM DETAILS Screen . . . . . . . . . . . .34,35
Program Information . . . . . . . . . . . . . . . . . . . .35
PROGRAMS OVERLAP Message . . . . . . . .42,43
PWR and POWER
and Copying . . . . . . . . . . . . . . . . . . . . . . . .34
REW (Rewind)
Button . . . . . . . . . . . . . . .20-21,26,29,32,33,34
Rewind Search . . . . . . . . . . . . . . . . . . . . . . . . . .29
— S —
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . .i
SAP Indicator . . . . . . . . . . . . . . . . . . . . . . . . .46,51
SAP Recording . . . . . . . . . . . . . . . . . . . . . . . . . .46
SAT•CABLE Button . . . . . . . . . . . . . . . . . . .20,24
Satellite Receiver Codes . . . . . . . . . . . . . . . . . .24
Satellite Receiver Connections . . . . . . . . . . . .6-7
SEARCH Button . . . . . . . . . . . . . .20-21,32-33,37
Search, Picture . . . . . . . . . . . . . . . . . . . . . . . . . .29
Select a Language . . . . . . . . . . . . . . . . . . . . . . . .18
Selecting a Background for
Buttons . . . . . . . . .20-21,22,23,24,25,31,44,49
— Q —
Questions and Answers about
COMMERCIAL ADVANCEª . . . . . .57
COMMERCIAL ADVANCEª . . . . . .37
Sensor, Remote . . . . . . . . . . . . . . . . . . . . . . . . . .49
SET DAYLIGHT SAVINGS Menu . . . . . . . . . . .14
SET TIME AND DATE Menu . . . . . . . . . . . . . .15
SET TIME ZONE Menu . . . . . . . . . . . . . . . . . . .14
Setting a VCR Plus+ Recording . . . . . . . . . . . .42
Setting Up the VCR . . . . . . . . . . . . . . . . . . . .9-19
Setup a Cable Box . . . . . . . . . . . . . . . . . . . . .12-13
Setup an RCA DSS¨ Receiver . . . . . . . . . . .11,13
SETUP Menu . . . . . . . . . . . . . . .10,11,12,13,14,16
Setup VCR Plus+ Channels . . . . . . . . . . . . .16,40
Shuttle Dial . . . . . . . . . . . . . . . . . . . . .26,29,30,49
Signal Type: CABLE/ANTENNA Feature . . . .17
SLOW + and Ð Buttons . . . . . . . . . . . . . .20-21,30
SLOW Indicators . . . . . . . . . . . . . . . . . . . . . .30,51
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
SLP Indicator . . . . . . . . . . . . . . . . . . . . . . . . .38,51
SLP Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Solving Problems . . . . . . . . . . . . . . . . . . . . .54-56
SP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .38,51
SP Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .52
SPEED Button . . . . . .20-21,38,39,42,43,45,46,47
Speeds, Recording . . . . . . . . . . . . . . . . . . . . . . .38
— R —
RCA Component, Codes . . . . . . . . . . . . . . . . . .25
RCA Component, Controlling with
Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
REC and RECORD
Buttons . . . . . . . . . . . .20-21,39,45,46,47,48,49
REC Indicator . . . . . . . . . . . . . . . . . . .39,46,47,51
REC P Indicator . . . . . . . . . . . . . . . . . . . . . .38,51
Reception: STEREO/MONO/SAP Feature . . .46
RECORD and REC
Buttons . . . . . . . . . . . .20-21,39,45,46,47,48,49
Record One Channel While Watching
Another . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Recording
Audio Only . . . . . . . . . . . . . . . . . . . . . . . . .47
Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Broadcast Stereo . . . . . . . . . . . . . . . . . . . . .46
From Another VCR . . . . . . . . . . . . . . . . . . .46
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
SAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
60
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
SRCH + and Ð Indicators . . . . . . . . . . . . . . .29,51
Standardized VCR Plus+ Channel
— V —
Numbers for Cable-TV . . . . . . . . . . . . . . . .40
Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-19
Status Displays . . . . . . . . . . . . . . . . . . . . .34,35,51
STEREO Indicator . . . . . . . . . . . . . . . . . . . .47,51
Stereo Playback . . . . . . . . . . . . . . . . . . . . . . . . .27
Stereo TV, Recording . . . . . . . . . . . . . . . . . . . . .46
STILL Indicator . . . . . . . . . . . . . . . . . . . . . . .29,51
Stop Action Pause . . . . . . . . . . . . . . . . . . . . . . .29
STOP Button . . . . . . . . . . . . . . . . .20-21,26,28,32
. . . . . . . . . . . . . . . .33,35,39,42,43,46,47,48,49
Stopping a Timer Recording . . . . . . . . . . . . . .43
Stopping a VCR Plus+ Recording . . . . . . . . . .42
Stopping an Express Recording . . . . . . . . . . . .45
Stopping COMMERCIAL ADVANCEª .36
VCR Controls . . . . . . . . . . . . . . . . . . . . . . . .49-51
VCR Function Buttons on Remote . . . . . . .20-21
VCR Indicator . . . . . . . . . . . . . . . . .18,19,26,39,51
VCR MAIN MENU . . . . . . . . . . . . . . . .10,11,12,13
. . . . . . . . . . . . . . . .14,16,22,27,28,36-37,40,46
VCR Plus+ Recording
Channel List . . . . . . . . . . . . . . . . . . . . . . . . .40
Channel Worksheet . . . . . . . . . . . . . . . . . . .41
Checking Programs . . . . . . . . . . . . . . . . . . .44
Clearing Programs . . . . . . . . . . . . . . . . . . .44
Editing Programs . . . . . . . . . . . . . . . . . . . .44
PlusCodes . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
VCR PLUS+ Menu . . . . . . . . . . . . . . . . . . .42
Worksheet for Channels . . . . . . . . . . . . . . .41
VCR, Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . .52
VCR, Turn On . . . . . . . . . . . . . . . . . . . . . . . . . . .10
VCR1 and VCR2•DVD Buttons
— T —
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . .1
TAPE Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .51
Tape Playback: HI-FI/LINEAR/MIX Feature . .27
Tape Speed Indicators . . . . . . . . . . . . . . . . . . . .51
Tape, Playing . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Time Counter . . . . . . . . . . . . . . . . .32,33,34,35,51
Time Counter, Displaying Only . . . . . . . . .34,35
Time Display . . . . . . . . . . . . . . . . . . . . . .14,15,51
TIME Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
TIMER Indicator . . . . . . . . . . . . . . . . . . . .42,43,51
Timer Programs, Checking . . . . . . . . . . . . . . . .44
Timer Programs, Clearing . . . . . . . . . . . . . . . .44
Timer Programs, Editing . . . . . . . . . . . . . . . . .44
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .43
TIMER RECORDINGS Menu . . . . . . . . .42,43,44
TRACKING Buttons . . . . . . . . . . . .20-21,26,29,31
Tracking, Automatic and Manual . . . . . . . . . .31
Trouble Checks . . . . . . . . . . . . . . . . . . . . . . .54-56
Turn on TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Turn On VCR . . . . . . . . . . . . . . . . . . . . . . . . . . .10
TV Button . . . . . . . . . . . . . . . . . . . . . . . . .20-21,23
TV Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
TV Function Buttons on Remote . . . . . . . . . . .21
TV, Turn On . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
TV•VCR Button . . . . . . . .18,19,20-21,26,39,49,51
Types of Recordings . . . . . . . . . . . . . . . . . . . . .38
. . . . . . . . . . . . . .10,13,16,18,20,22,31,41,42,48
VCR1/VCR2 Feature . . . . . . . . . . . . . . . . . . . . .16
VCRs Memory, Placing Channels . . . . . . . . . .14
VCRs, Connecting for Tape Copying . . . . . . . .8
VIDEO1 and VIDEO2 Indicators . . . . . . . . .43,44
VOL (Volume) Up or Down Button . . . . . .20-21
— W —
Warranty, Limited . . . . . . . . . . . . . . . . . . . . . . .53
Watch One Channel While
Recording Another . . . . . . . . . . . . . . . . . . .39
Worksheet, VCR Plus+ Channels . . . . . . . . . .41
— X —
X-REC Indicator . . . . . . . . . . . . . . . . . . . . . .45,51
XPR Recording . . . . . . . . . . . . . . . . . . . . . . . . . .45
— U —
Use the On-Screen Menu System . . . . . . . . . .10
Using the VCR2•DVD Button . . . . . . . . . . .20,22
61
Download from Www.Somanuals.com. All Manuals Search And Download.
For your nearest Authorized Servicenter
call toll-free in the U.S.A.
1-800-336-1900
Canadian Consumers Ð
Your toll free numbers are:
English: 1-800-522-0338
French: 1-800-522-0445
If you would like a copy of this manual in French, please follow the
instructions below:
Si un livret d’instructions en français n’est pas inclus avec votre appareil, vous
pouvez en obtenir un (indiquer le numéro de modèle, votre nom, et votre
adresse) en vous adressant à:
Thomson Consumer Electronics
Attention: Canadian Operations
P.O. Box 0944
Indianapolis, IN 46206-0944
If your VCR needs service, please contact your dealer
or the nearest Servicenter from the yellow pages.
Please do not send any products to the Indianapolis
address listed in this manual or on the carton. This
will only add delays in service for your product.
10330 North Meridian Street
Indianapolis, IN 46290-1024
©1996 Thomson Consumer Electronics, Inc.
Trademark(s)¨ Registered
Marca(s) Registrada(s)
Printed in Singapore
Part Number 96-VR688HF-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|