video cassette recorder
user's guide
VR629HF
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE O F CO N TEN TS
First Things First .............................................................. 3
Setting up the VCR ......................................................... 7
Using the Menu to set up features ................................................... 8
Language .......................................................................................... 8
VCR Channels List......................................................................... 8
To Auto Channel Search........................................................ 9
To Change the Signal Type...................................................10
To Add or Remove Channels .............................................10
Time and Date..............................................................................10
Set Daylight-SavingTime ......................................................10
Set the Time and Date .........................................................11
VCR Plus+ Channels ...................................................................12
Additional SET-UP Features in the PREFERENCES menu .........14
Remote VCR1/VCR2 Option...................................................14
Auto Play........................................................................................15
Auto TV/VCR................................................................................15
EnergySaver ...................................................................................16
VCR Basics ..................................................................... 17
Remote Buttons..................................................................................18
Component Buttons ...................................................................18
VCR Function Buttons................................................................18
TV Function Buttons...................................................................19
Playing aTape .......................................................................................20
Automatic Rewind..............................................................................21
Tape Eject .............................................................................................21
Recording .............................................................................................21
Check the Safety Tab ...................................................................21
Recording ...................................................................... 23
Recording features .............................................................................24
Express Recording (XPR) ..........................................................24
Timer Recording ..........................................................................25
Timer Recording withVCR Plus+ ............................................26
Setting Up the Channel List ................................................26
UsingVCR Plus+....................................................................26
Stopping a Timer Recording ......................................................28
Reviewing and Clearing Programs ...........................................28
7
Recording Broadcast Stereo TV or SAP
(Second Audio Program) ............................................................28
Recording Audio Only ................................................................29
Playing Back Audio Only ......................................................29
Using Two VCRs for Copying and EditingTapes ....................30
1
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE O F CO N TEN TS
Programming the Remote ............................................ 31
About Programming the Remote ...................................................32
Programming the Remote to Control a TV ..........................32
Operate the TV ............................................................................32
TV Codes .............................................................................................33
Other Features .............................................................. 35
Picture Search Options .....................................................................36
Forward and Reverse Search ....................................................36
Slow Motion..................................................................................36
Commercial Scan (SEARCH button) ......................................37
Frame Advance .............................................................................37
Go-To Search ................................................................................37
Index Search..................................................................................38
Pro-Tect Plus™ Locking Feature ....................................................38
Tracking.................................................................................................39
Time Counter ......................................................................................39
On-Screen Displays ............................................................................40
Audio Set-Up Features ......................................................................41
Reception.......................................................................................42
Tape Playback ................................................................................42
Connections .................................................................. 43
Things to Know Before Connecting Components .....................43
ConnectingYour VCR ........................................................................44
Jacks and Cables...........................................................................44
Choosing a VCR Connection..........................................................45
Advantages of Audio/Video Cable Connections .........................45
Don’t Forget about the AUTO TV/VCR Feature.........................45
TV with RF jack only ...................................................................46
TV with audio/video jacks..........................................................47
TV with audio/video jacks and cable box
to unscramble pay channels only..............................................48
Appendix: Reference .................................................... 49
Front Panel ...........................................................................................50
Display Panel ........................................................................................51
Back Panel ............................................................................................52
Troubleshooting Tips..........................................................................53
Limited Warranty ................................................................................56
Specifications .......................................................................................57
Cleaning the VCR................................................................................57
Index .............................................................................. 58
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Fir st Th in g s Fir st
H i, m y n a m e is Liz …
Fir st t h in g s f ir st
1
2
3
4
and I wrote this User’s Guide. It’s my job to see
that you have a rewarding user m anual experience.
You’ll find that I’ve arranged this m anual to clearly
explain all of your VCR’s features.
Se t t in g Up t h e VCR
VCR Ba sic s
Re a d t h e Fir st Th r e e se c t io n s
The first three sections of the m anual introduce
you to your VCR, and show you how to set the VCR
up and use the on-screen m enus. Reading these
sections gives you the basic inform ation you need
to use your VCR.
r e c o r d in g
Wh a t ’s Le f t ?
PRO GRAM M IN G TH E
REM O TE
The rest of the book highlights playback and
recording inform ation, contains a detailed
connections section, and a reference section that
includes troubleshooting tips, lim ited warranty, and
index.
5
O TH ER FEATURES
Co n n e c t io n s
6
7
READ ME!
These note boxes give you tips for
your new video cassette recorder.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Fir st Th in g s Fir st
St e p 1: Un pa c k Wh a t ’s in t h e Bo x
The following items come packed in the box:
•
•
•
VCR
Remote control
RF coaxial cable
STEP 2: In st a l l Ba t t e r ie s In t h e
Re m o t e Co n t r o l
Follow these steps whenever you need to install or change the
batteries in your VCR remote.
1. Remove the cover of the battery compartment.
2. Place the batteries in the remote, matching the + and – ends
of each battery to the diagram inside the compartment.
3. Replace the cover.
CABLE, CABLE BOX, OR ANTENNA
STEP 3: Co n n e c t y o u r v c r
If you connect your VCR to your home antenna or cable system
and then to your TV, use the VCR’s ANT. IN and RF OUT jacks for a
good signal as shown.
VCR
OUT
IN
ANT. IN
RF OUT
VIDEO
AUDIO
L
R
3
CH.
4
If you have a TV with AUDIO/VIDEO jacks, use the jacks for a
better connection. Refer to the Connections section, toward the
back of the manual.
TV
CABLE/
ANTENNA
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Fir st Th in g s Fir st
STEP 4: PLUG IN TH E VCR
Match the wide blade of the plug with the wide slot in the
outlet. Be sure to insert the plug completely.
STEP 5: TUN e TH E TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV’s video input.
•
If you connect your VCR using the ANTENNA connectors with
RF coaxial cable, set the 3 CH. 4 switch to channel 3 or
channel 4 — the channel you want to use on your TV.
•
If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select the TV’s video input to see the
signal. See the TV Owner’s Manual.
STEP 6: t u r n o n t h e v c r
Press POWER to turn on the VCR.
STEP 7: Ac c e ss t h e m e n u s
The MENU and number buttons let you access, select and change
menu items. For example, to change the Auto Play setting, you
would do the following:
VCR View ing Channel
When using the ANT. IN and RF OUT
jacks to connect your VCR, tune your
TV to channel 3 or 4.
When using the AUDIO/VIDEO jacks to
connect your VCR, tune your TV to the
TV’s video input.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Fir st Th in g s Fir st
1. Press MENU to display the VCR MAIN MENU.
VCR MAI N MENU
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
La n g u a g e
Ex i t
2. Press 5 to display the PREFERENCES menu.
P REF ERENCES
1
2
3
4
Re mo t e Co n t r o l : VCR1
Au t o P l a y :
ON
Au t o TV/ VCR:
En e r g y S a v e r :
ON
2 : 0 0
0
Ex i t
3. Press 2 to switch Auto Play to ON or OFF.
P REF ERENCES
1
2
3
4
Re mo t e Co n t r o l : VCR1
Au t o P l a y :
ON
Au t o TV/ VCR:
En e r g y S a v e r :
ON
2 : 0 0
0
Ex i t
See Additional Set-Up Features for detailed information
about the Auto Play feature.
STEP 8 : SET UP TH E VCR
Once you understand how to move around through the menus,
go to the next section to set up your VCR.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
o n -sc r e e n g u id e a n d Ad d it io n a l
Se t -u p f e a t u r e s
Fir st t h in g s f ir st
1
2
3
4
Below is a list of set-up features that you m ay want
to set up before you begin using your VCR for the
first tim e.
Se t t in g Up t h e VCR
VCR Ba sic s
•
•
Select a Language
Set up VCR Channel List (Auto Channel
Search)
•
•
•
•
•
•
Set Tim e and Date
Set up VCR Plus+ Channels
Set the Rem ote VCR1/VCR2 feature
Set the Auto Play feature
Set the Auto TV/VCR feature
Set the EnergySaver feature
r e c o r d in g
PRO GRAM M IN G TH E
REM O TE
5
O TH ER FEATURES
Co n n e c t io n s
6
7
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
USIN G TH E M EN U t o se t u p f e a t u r e s
You can set up features by using the menu system. Each feature
is explained in this section.
l a n g u a g e
Select your preferred language, and the on-screen displays will
appear in that language.
1. Press MENU to display the VCR MAIN MENU.
VCR MAI N MENU
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
La n g u a g e
Ex i t
2. Press 7 to select the LANGUAGE menu.
LANGUAGE
S e l e c t
a
l a n g u a g e .
1
2
3
En g l i s h
Es p a n o l
F r a n c a i s
˜
P r e s s MENU t o c o n t i n u e
3. Select English, Español (Spanish), or Français (French).
VCR CH AN N ELS LIST
If you use a cable box for all channels, this step is not necessary.
Your VCR may come with a channel list preset at the factory.
Even though your VCR may come with a list, it’s possible that
you may want to add or eliminate some channels depending on
whether they are active.
On-Screen Menus
Not all the VCR screens are show n in this
manual w hen explaining the features.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
To Auto Channel Search
1. Press MENU to display the VCR MAIN MENU.
VCR MAI N MENU
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
La n g u a g e
Ex i t
2. Press 4 to display the CHANNELS menu.
CHANNELS
1
2
3
4
Au t o Ch a n n e l S e a r c h
Ad d / Re mo v e Ch a n n e l s
S i g n a l Ty p e : CABLE
VCR P l u s + Ch a n n e l Li s t
0
Ex i t
3. Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL S EARCH
Wh a t t y p e o f s i g n a l
a r e y o u u s i n g ?
1
2
Ca b l e TV
An t e n n a
3 > De t e c t Au t o ma t i c a l l y
0
Ca n c e l
4. Select one of the three AUTO CHANNEL SEARCH options.
Choices one and two are self-explanatory. If you choose
Detect Automatically, the VCR automatically detects which
signal system you have attached to your VCR.
Auto Channel Search
Use the Auto Channel Search feature
to place all available channels in
memory.
AUTO CHANNEL S EARCH
If you ever change cable or antenna
signals, you may need to Auto
Channel Search again.
No w s c a n n i n g c h a n n e l 1 4
P r e s s a n y k e y t o c a n c e l
Detect Automatically
A strong cable or antenna signal in
your area may cause Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you have.
The VCR begins scanning for the available channels--this
takes about one to two minutes. The lowest channel is tuned
once the search is complete. Now pressing CHAN up or down
should only select the active channels.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
To Change the Signal Type
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the Signal Type between CABLE and
ANTENNA.
To Add or Remove Channels
You may want to add or remove channels after you Auto
Channel Search, especially if some of the channels have weak
signals or you don’t want to watch them.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 2 to display the ADD/REMOVE CHANNELS screen. Use
CHAN up or down or number buttons to go to the channels
you want to remove or add.
ADD/ REMOVE CHANNELS
ADD/ REMOVE CHANNELS
Ch a n n e l 1 1 5
Ch a n n e l 1 1 5
i s p r e s e n t l y REMOVED
i s p r e s e n t l y ADDED
P r e s s I NF O t o a d d
P r e s s MENU t o e x i t
P r e s s CLEAR t o r e mo v e
P r e s s MENU t o e x i t
Tim e a n d Da t e
Before you set the time and date, set the Auto DST (Daylight-
Saving Time) feature to ON or OFF for your area.
Set Daylight-Saving Time
1. Press MENU to display the VCR MAIN MENU.
VCR MAI N MENU
Selecting Channels
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
The CHANNEL up and dow n buttons
access those channels active in your
VCR channel list.
La n g u a g e
Ex i t
You can still access channels not in
the channel list by using the number
buttons on the remote.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
2. Press 3 to display the TIME menu.
TI ME
1
2
S e t Ti me a n d Da t e
Au t o DS T: ON
0
Ex i t
3. Press 2 to turn Auto DST: ON or OFF.
•
Select ON if you want the VCR’s clock to automatically adjust
for daylight-saving time.
•
Select OFF if you do not want the VCR’s clock to adjust for
daylight-saving time.
Set the Time and Date
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to display the TIME menu.
3. Press 1 to display the SET TIME AND DATE menu.
S ET TI ME AND DATE
Spring forw ard; Fall backw ard
Ti me - - : - -
( h h : mm)
In the Spring, daylight-saving time
begins on the first Sunday in April.
Because the clock automatically
changes from 2:00 AM to 3:00 AM
(forw ard one hour), remember to
include the extra hour for timer
recording falling w ithin this time
frame.
Da t e - - / - - / - -
P r e s s MENU t o c a n c e l
4. Enter the data using the number buttons. Press 0 before
single-digit numbers and follow the on-screen directions.
In the Autumn, daylight-saving time
ends on the last Sunday in October.
The VCR clock automatically changes
from 2:00 AM to 1:00 AM (back one
hour). Therefore, it can affect your
recording length.
S ET TI ME AND DATE
Ti me 1 2 : 3 4 P M
Da t e 1 1 / 1 8 / 9 7 Tu e s d a y
P r e s s CLEAR t o c o r r e c t
P r e s s MENU t o s e t
Time/Date Display
Pressing INFO on the remote displays
the time and date on the screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
VCR PLUS+ CH AN N ELS
Two-Digit VCR Plus+ Channel
Num bers for Cable TV
(USA List)
Using VCR Plus+ can make programming timer recordings for
cable or off-air antenna easier, but you have to put in a little time
right now to set up a channel list. A worksheet and abbreviated
codes for typical cable services in the U.S. and Canada are
provided.
35
Am erican Movie Classics
Arts &-Entertainm ent
Black Entertainm ent
Bravo
39
57
54
42
45
98
37
53
63
34
47
33
95
96
51
46
58
48
49
38
64
99
41
97
59
52
44
62
93
94
55
43
60
Cable News Network
Cinem ax
1. Press MENU to display the VCR MAIN MENU.
VCR MAI N MENU
Cinem ax 2
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
The Discovery Channel
The Disney Channel
Entertainm ent Television
ESPN Sports Network
The Fam ily Channel
Hom e Box O ffice
Hom e Box O ffice 2
Hom e Box O ffice 3
The Learning Channel
Lifetim e
La n g u a g e
Ex i t
2. Press 4 to display the CHANNELS menu.
CHANNELS
1
2
3
4
Au t o Ch a n n e l S e a r c h
Ad d / Re mo v e Ch a n n e l s
S i g n a l Ty p e : CABLE
VCR P l u s + Ch a n n e l Li s t
The Movie Channel
Music Television
The Nashville Network
Nickelodeon
Nostalgia Television
Q ualityValue Cable
Showtim e
0
Ex i t
Showtim e 2
3. Press 4 to display the VCR Plus+ Channel List screen.
Sports Channel
Turner Network Television
USA-Network
VCR+ Ch a n n e l My Ch a n n e l
5
4
3
2
1
- -
- -
Video Hits 1
- > - > - > - -
Viewer’s Choice 1
Viewer’s Choice 2
W GN Chicago
- -
- -
Us e CH+ / - t o s e l e c t
P r e s s 0 - 9 t o c h a n g e
P r e s s MENU t o s a v e
W TBS Atlanta
W W O R-New York
See next page for Canadian List
4. Enter the data following the on-screen directions using your
worksheet.
VCR Plus+ Channel List
VCR+ Ch a n n e l My Ch a n n e l
5
4
3
2
1
4 6
- -
Refer to your local television list for
a complete VCR Plus+ channel list for
your view ing area or contact your
cable company. Using the list may
save you some time.
- > - > - > 2 3
- -
- -
Us e CH+ / - t o s e l e c t
P r e s s 0 - 9 t o c h a n g e
P r e s s MENU t o s a v e
Screen is for an example only.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
VCR Pl u s+ Wo r k sh e e t
Bro a d ca st o r
Ca b le -TV St a t io n
Na m e
VCR Plu s+ Ch a n n e l
Nu m b e r**
Ch a n n e l Nu m b e r
Yo u Re ce ive t h e
St a t io n On *
Two-Digit VCR Plus+ Channel
Num bers for Cable TV
(Canadian List)
67 Allarcom PayTelevision/
Superchannel
H b o
33
34
ESPN
44 Arts & Entertainm ent
72 Cable News Network-Headline
News
61 Cable News Network
70 Canadian Hom e Shopping Network
56 Canal Fam ille
69 Cathay InternationalTelevision Inc
68 Chinavision Canada Corp
60 Country Music Television
63 Fam ily Channel
62 First Choice
96 First Choice Two
97 First Choice Three
99 First Choice Four
90 House of Com m ons
91 La Chaine Francaise
51 The Learning Channel
65 MeteoMedia/The Weather Network
48 MuchMusic Network
55 MusiquePlus
52 Nashville Network
73 Newsworld/CBC
53 Le Reseau des Sports
43 The Sports Network
64 Super Ecran
37 Super Ecran B
98 Super Ecran C
66 Telatino Network
46 TV5 Montreal
92 Viewer’s Choice 1
93 Viewer’s Choice 2
94 Viewer’s Choice 3
95 Viewer’s Choice 4
71 Vision TV: Canada’s Faith Network
38 Youth TV, Canada Inc.
*Check your local or cable listing for the channel number you receive this station on.
**Check your local listing for broadcast or VCR Plus+ channel number assigned.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
Ad d it io n a l SET-UP f e a t u r e s in t h e
Pr e f e r e n c e s m e n u
The features in this section are all accessed through the
PREFERENCES menu.
1. Press MENU to display the VCR MAIN MENU.
VCR MAI N MENU
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
La n g u a g e
Ex i t
2. Press 5 to display the PREFERENCES menu.
P REF ERENCES
1
2
3
4
Re mo t e Co n t r o l : VCR1
Au t o P l a y :
ON
Au t o TV/ VCR:
En e r g y S a v e r :
ON
2 : 0 0
0
Ex i t
Now you are ready to select an item from the menu to set up.
REM O TE VCR1/ VCR2 Op t io n
If you own a compatible RCA, GE, or ProScan remote that has a
VCR2, VCR2•LD, or VCR2•DVD button, this feature allows you to
set this VCR to respond to that button.
Press 1 to select the Remote Control item. Then press the VCR2,
VCR2•LD, or VCR2•DVD button to change.
P REF ERENCES
P REF ERENCES
( P r e s s VCR2 t o Ch a n g e )
1
2
3
4
Re mo t e Co n t r o l : VCR2
2
3
4
Au t o P l a y :
Au t o TV/ VCR:
En e r g y S a v e r :
OF F
OF F
2 : 0 0
Au t o P l a y :
OF F
Au t o TV/ VCR:
En e r g y S a v e r :
OF F
2 : 0 0
0
Ex i t
0
Ex i t
Remote Control Option
Changing the remote option to VCR2
disables the remote that came w ith
your VCR.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
The VCR will only respond to the compatible remote’s VCR2,
VCR2•LD, or VCR2•DVD button. If you change the remote setting
to VCR2, the remote that came with your VCR will no longer
control it.
Use the compatible remote to change the remote setting back to
VCR1. Display the PREFERENCES menu, press 1, and then press
VCR on the VCR’s remote.
AUTO PLAY
This feature allows the VCR to automatically start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFF.
•
Select ON if you want a tape with its safety tab removed to
start playing automatically when the tape is inserted.
•
Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
Au t o TV/ VCR
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode. Press 3 to switch between ON
and OFF.
•
•
Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted. This only
applies if you connect the ANT. IN and RF OUT jacks of your
VCR and TV and watch your VCR on channel 3 or 4 of your
TV.
Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV’s video input
and you don’t want your antenna/cable signal interrupted by
the VCR. Refer to the Connections section, toward the back
of the manual.
Auto TV/VCR
Pressing TV•VCR w ill still sw itch
betw een the VCR and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up t h e VCR
En e r g y Sa v e r
By default, this VCR automatically turns off after two hours of
inactivity. Press 4 to change the time delay, or to disable the
feature.
•
•
OFF: The VCR will remain turned on until you shut it off.
1:00, 2:00, or 3:00: The VCR turns off after one, two, or three
hours of inactivity.
Thirty seconds before shutting off, the VCR will warn you with a
screen reading, “The VCR will turn off in 30 seconds. Press any
key to cancel.”
If you use the VCR’s tuner instead of your TV to tune channels,
you may want to turn this feature off.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR BAsICS
l e a r n t h e b a sic s To g e t
y o u st a r t e d
Fir st t h in g s f ir st
1
2
3
4
These VCR basics should be enough for you to
begin enjoying your VCR. Learning the rem ote
control functions, playing a recorded tape, and
recording a program should do just that.
Se t t in g Up t h e VCR
VCR Ba sic s
However, there are other features that
enhance the enjoym ent of your VCR, but they
aren’t necessar y to get you started. If you want
to learn m ore about your VCR, just keep
reading.
r e c o r d in g
PRO GRAM M IN G TH E
REM O TE
5
O TH ER FEATURES
Co n n e c t io n s
6
7
VCR Basics tells you w hat you need
to know in order to w atch a movie
or tape your favorite show.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Ba sic s
Re m o t e Bu t t o n s
The remote control is capable of controlling your VCR and many
brands of televisions. If you have an RCA, ProScan, or GE TV, you
may be able to control it without having to program the remote.
OFF
TV
VCR
REVERSE
PLAY
STOP
FORWARD
PAUSE
Co m p o n e n t Bu t t o n s
RECORD
INFO
OFF Turns off VCR when remote is set to control the VCR. Also
turns some compatible components on and off.
SEARCH
TV Turns on a compatible RCA, ProScan, or GE TV and sets the
remote to control the TV. Also used with the OFF button to turn
on a different brand of TV (if programmed) and sets the remote
to control the TV.
GO BACK
SPEED
MUTE
VCR Turns on a compatible RCA, ProScan, or GE VCR and sets
the remote to control the VCR.
CLEAR
MENU
VCR Fu n c t io n Bu t t o n s
CHAN Up o r Do w n Selects next higher or lower channel in the
2
5
8
0
1
3
6
9
VCR’s channel memory.
4
7
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FORWARD Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow
motion during play-pause and increases slow-motion speed.
F.ADV
TRACKING
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line input and the VCR’s tuner. Line
input refers to the signal coming from the component connected
to the AUDIO/VIDEO IN jacks on the back of the VCR.
MENU Brings up VCR MAIN MENU on the TV screen.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR BAsICS
Nu m b e rs (0 t h ro u g h 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 – – appears on the screen. Then press the other
two numbers.
OFF Turns off the VCR when the remote is set to control the
VCR. Turns off other components if remote is programmed.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
RECORD Starts VCR recording. Also used for express recording.
REVERSE Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback. Starts slow motion
during play-pause and decreases slow-motion speed.
SEARCH Displays Index and Go-To Search menus on TV screen
when VCR is stopped. Advances the tape 30 seconds of recorded
material during playback. Each press advances the tape an
additional 30 seconds up to five minutes.
SPEED Selects a recording speed (SP or SLP).
STOP Stops the current VCR function such as record, playback,
rewind, or fast forward.
TRACKING Up o r Do w n Lets you manually reduce the streaks
that may appear on the picture during play, slow motion, or
pause. Reduces picture “jitter” during stop-action playback.
TV•VCR Switches the picture signal so that it either comes from
the VCR or cable/antenna system.
TV Fu n c t io n Bu t t o n s
CHAN Up o r Do w n Selects next higher or lower channel in the
TV’s channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the TV’s status displays on the TV screen.
TV Buttons
MUTE Reduces volume to minimum level.
The TV buttons may not control all
features of all models of RCA,
ProScan and GE TVs.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Ba sic s
Nu m b e rs (0 t h ro u g h 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 – – appears on the screen. Then press the other
two numbers.
OFF Turns the TV off.
VOL Up a n d Do w n Raises and lowers sound of TV.
Pl a y in g a Ta p e
1. Tune the TV to your VCR viewing channel (3, 4, or TV’s video
input).
2. Insert a tape in the VCR.
.
.
VIDEOIN
Lmono •AUDIOIN •R
TI
MER
A
M
VCR
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).
•
•
Press FWD or REV (FORWARD or REVERSE on remote) to
position the tape.
Press PLAY•PAUSE (if necessary) on the VCR (PLAY on remote)
to begin tape play.
•
•
Press PLAY•PAUSE (PAUSE on remote) for stop action.
Pause
Press TRACKING up or down to remove any streaks from the
picture, if necessary.
If you pause, the VCR automatically
sw itches from pause to stop after a
few minutes to reduce tape w ear.
•
Press STOP•EJECT on VCR (STOP on remote) to stop playback.
Automatic Tracking
The VCR has automatic tracking
w hich adjusts the picture w hen
playing back a tape recorded on
another VCR. Automatic tracking is
turned on w henever a tape is
inserted or the VCR’s pow er is
turned on.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR BAsICS
Au t o m a t ic Re w in d
The VCR automatically rewinds the tape if it reaches the end of
the tape during playback. While rewinding, you can press
POWER and the VCR will turn off after rewinding.
Ta p e Ej e c t
Press STOP•EJECT on the VCR (STOP on remote) when it is
stopped to eject the tape.
Re c o r d in g
If you want to record something that you’re watching, you can
use basic recording.
1. Set the tape speed by pressing the SPEED button on the
remote (see “Tape Speed” in Setting Up the VCR section for
information about tape speed settings).
2. Press the RECORD button to begin recording.
3. Press STOP to stop recording.
If you just want to pause the recording for a short time
(such as during a commercial), press PAUSE instead of STOP.
Ch e c k t h e Sa f e t y Ta b
No matter which recording option you use, you need to make
sure there is a tape in the VCR, and that the tape’s safety tab is in
place. You cannot record on a tape with the safety tab removed.
Safety Tab
If the safety tab is removed and you want to record over it,
simply cover the hole with vinyl tape.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO RDIN G
SEVERAL r e c o r d in g O PTIO N S
Fir st t h in g s f ir st
1
2
3
4
Now that you’ve gone through the necessary
steps to operate your VCR, I’ll explain the
different recording features that are available
to suit your needs.
Se t t in g Up t h e VCR
VCR Ba sic s
Recording Features:
•
•
•
•
•
Recording (explained in VCR Basics section)
Express Recording
Tim er Recording
Tim er Recording with VCR Plus+
r e c o r d in g
Broadcast Stereo or Second Audio Program
(SAP)
•
•
Audio O nly Recording
PRO GRAM M IN G TH E
REM O TE
5
Copying and Editing Tapes
O TH ER FEATURES
Co n n e c t io n s
6
7
23
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO RDIN G
Re c o r d in g f e a t u r e s
There are four ways to record programs:
•
Re co rd in g lets you press one button to start recording a
program. (See VCR Basics section.)
•
Exp re ss Re co rd in g lets you start recording a program you
are watching, and then set the VCR to automatically stop
recording after a designated period of time.
•
•
Tim e r Re co rd in g lets you program the VCR to automatically
start and stop recording at a predetermined time.
Tim e r Re co rd in g w it h VCR Plu s+ lets you program the VCR
just by entering a PlusCode number found in TV guides.
Ex p r e ss Re c o r d in g (XPR)
Use express recording when you want to quickly record the
remaining portion of the program you are watching.
1. Set the tape speed by pressing the SPEED button on the
remote.
2. Press the RECORD button to begin recording.
3. Repeatedly press the RECORD button to set up the
recording duration.
REC
CH 3 6
REC
CH 3 6
Re c o r d Le n g t h 0 : 0 0
Re c o r d Le n g t h 1 : 3 0
P r e s s REC t o s e t l e n g t h
P r e s s REC t o s e t l e n g t h
Each time you press the RECORD button, you increase the
recording time (up to 4 hours).
The VCR continues to record for the amount of time you
indicate, and then automatically turns off.
To stop an express recording, press and hold STOP for a
few seconds.
Express Recording
Express recording is a great w ay to
tape the last quarter of the game, or
the last part of a movie w hen you
have to leave.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO RDIN G
Tim e r Re c o r d in g
You can set up as many as eight timer recording programs.
1. Press MENU to display the VCR MAIN MENU.
VCR MAI N MENU
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
La n g u a g e
Ex i t
2. Press 2 to display the TIMER RECORDINGS menu.
TI MER RECORDI NGS
1
2
3
Cr e a t e
Re v i e w Ex i s t i n g P r o g s .
Us e VCR P LUS + Co d e
a
Ne w P r o g r a m
0
Ex i t
3. Select 1 to Create a New Program.
Ho w o f t e n s h o u l d t h i s
p r o g r a m r e c o r d ?
1
2
3
4
On e t i me
Da i l y
We e k d a y s ( M- F )
Timer Recording Information
( e v e r y d a y )
Clock must be set correctly.
We e k l y ( o n c e p e r we e k )
Insert a tape w ith the safety tab in
place and enough tape to record
the program.
0
Ca n c e l
4. Select how often you want the program to record.
PROGRAMS OVERLAP appears if you
have entered tw o programs w here
the times overlap.
Program 1 (One time)
Channel
Start Time --:--
End Time --:--
--
The TIMER indicator appears in the
display w hen you turn off the VCR
and a timer recording has been set. It
flashes if there is no tape in the VCR.
Start Date --/--/--
Tape Speed SLP
Press MENU to cancel
When recording from a cable box or
satellite receiver, turn it on and tune
it to the channel you w ant to record
before the recording is to begin. The
VCR channel should be set to the
cable box’s output channel, usually
Channel 3 or 4.
5. Enter the data for the program with the number buttons.
The data includes the channel number (press INPUT to select
the line input), start time including AM or PM, and end time.
The start date is automatically entered based on the VCR
clock. The date and/or speed can be changed when flashing.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO RDIN G
6. Review the information to make sure it is correct, and then
press MENU to save.
P r o g r a m
1
h a s b e e n s a v e d
Re me mb e r t o i n s e r t
r e c o r d a b l e t a p e a n d
a
t u r n t h e VCR o f f b e f o r e
t h e p r o g r a m s t a r t t i me .
1
( o n e t i me )
P r e s s MENU t o c o n t i n u e
Tim e r Re c o r d in g w it h VCR Pl u s+
You can use VCR Plus+ to simplify timer programming if you have
cable TV and don’t receive all channels through a cable box or if
you receive your TV signal off-air.
Setting Up the Channel List
VCR MAI N MENU
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
If you did not set up the VCR Plus+ channel list, you can do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List menu.
1
2
3
4
Ch a n n e l s
CHANNELS
1
Au t o Ch a n n e l S e a r c h
3. Go to Setting Up Your VCR if you need more information on
2
3
4
Ad d / Re mo v e Ch a n n e l s
S i g n a l Ty p e : CABLE
VCR P l u s + Ch a n n e l Li s t
setting up your VCR Plus+ channel list.
VCR+ Ch a n n e l My Ch a n n e l
5
4
3
2
1
4 6
- -
Using VCR Plus+
- > - > - > 2 3
- -
- -
1. Press MENU to bring up the VCR MAIN MENU.
VCR MAI N MENU
Us e CH+ / - t o s e l e c t
P r e s s 0 - 9 t o c h a n g e
P r e s s MENU t o s a v e
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
La n g u a g e
Ex i t
2. Press 1 to display the VCR PLUS+ menu.
VCR P LUS +
En t e r P l u s Co d e Nu mb e r
( f r o m TV l i s t i n g )
_
If you receive all channels through your
cable box on Channel 3 or 4, you must
use the regular Timer Recording method
to record programs.
P r e s s MENU t o c a n c e l
VCR Plus+ and PlusCode are registered trademarks
of Gemstar Development Corporation.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO RDIN G
3. Enter the VCR PlusCode shown in your local television
programming guide.
VCR P LUS +
En t e r P l u s Co d e Nu mb e r
( f r o m TV l i s t i n g )
1 2 8 7 6
P r e s s CLEAR t o c o r r e c t
P r e s s MENU wh e n d o n e
4. Press MENU to enter the VCR PlusCode number.
Ho w o f t e n s h o u l d t h i s
p r o g r a m r e c o r d ?
1
2
3
4
On e t i me
Da i l y
We e k d a y s ( M- F )
( e v e r y d a y )
We e k l y ( o n c e p e r we e k )
0
Ca n c e l
5. Indicate how often you want the program to be recorded.
P r o g r a m
Ch a n n e l
1
( On e t i me )
0 3 Ca b l e
S t a r t Ti me 0 8 : 0 0 P M
En d Ti me 0 9 : 3 0 P M
VCR Plus+ Recording
S t a r t Da t e 1 0 / 2 4 / 9 8 S AT
Ta p e S p e e d S LP
Clock must be set correctly.
P r e s s CLEAR t o a d j u s t
P r e s s MENU t o s a v e
Insert a tape w ith the safety tab in
place and enough tape to record the
program.
6. Change the speed with the SPEED button on the remote or
the program end time with the CLEAR button on the remote
(if necessary).
The TIMER indicator appears in the
display w hen you turn off the VCR
and a timer recording has been set. It
flashes if there is no tape in the VCR.
Changing the end time comes in handy when you are
recording a program, such as a sporting event, that may
exceed the scheduled broadcast time.
PROGRAMS OVERLAP appears if you
have entered tw o programs w here
the times overlap.
7. Press MENU to save the program.
UNRECOGNIZED NUMBER... PLEASE
RE-ENTER appears w hen the VCR does
not recognize the PlusCode number.
P r o g r a m
1
h a s b e e n s a v e d
Re me mb e r t o i n s e r t
r e c o r d a b l e t a p e a n d
t u r n t h e VCR o f f b e f o r e
t h e p r o g r a m s t a r t t i me .
a
Turn on the cable box and tune it to
the channel you w ant to record
before the recording is to begin.
Timer recordings w ill not be lost in
the event of an extended pow er
outage.
P r e s s MENU t o c o n t i n u e
27
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO RDIN G
St o p p in g a Tim e r Re c o r d in g
To stop or cancel a timer recording in progress (even an express
recording):
•
Press and hold the STOP button for a few seconds.
REVIEWIN G AN D CLEARIN G PRO GRAM S
To review programs that you have already set up:
1. Press 2 when the VCR MAIN MENU is displayed to display the
TIMER RECORDINGS menu.
TI MER RECORDI NGS
1
2
3
Cr e a t e
Re v i e w Ex i s t i n g P r o g s .
Us e VCR P l u s + Co d e
a
Ne w P r o g r a m
0
Ex i t
2. Press 2 to display the Review Existing Progs. screen.
P r o g r a m
Ch a n n e l
1
( On e t i me )
1 0 4 Ca b l e
S t a r t Ti me 1 2 : 0 0 AM
En d Ti me 0 1 : 3 0 AM
S t a r t Da t e 1 0 / 2 4 / 9 7 F RI
Ta p e S p e e d S LP
P r e s s CLEAR t o e r a s e
P r e s s MENU f o r n e x t p r o g
3. Press CLEAR to erase or MENU to see the next program.
Re c o r d in g Br o a d c a st St e r e o TV o r SAP
(Se c o n d Au d io Pr o g r a m )
Some TV programs are broadcast with stereo audio or SAP
(Second Audio Program).
1. Turn on the TV and tune it to the VCR viewing channel
(either 3, 4, or TV’s video input).
2. Insert a tape with safety tab in place.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO RDIN G
3. If your VCR viewing channel is 3 or 4, make sure the VCR
indicator appears in the VCR’s display panel. If not, press TV•VCR
to turn it on.
4. Use the SPEED button on the remote to select a recording speed.
The tape speed indicator appears on the TV screen.
5. Select the channel or line input to be recorded.
6. Set the Reception: STEREO/MONO/SAP feature for the type of
audio you want to record. See Other Features section.
AUDI O
1
2
Re c e p t i o n :
Ta p e P l a y b a c k : HI - F I
S TEREO
0
Ex i t
7. Press RECORD to start recording.
8. Press STOP when you are finished.
Re c o r d in g Au d io O n l y
You can record audio only from another audio source connected
to the AUDIO IN 1 (R and L/MONO) jacks on the back of the VCR
or the AUDIO IN 2 jacks on the front panel.
Recording audio only w ill erase
anything that w as previously recorded
on the tape.
1. Press the INPUT button on the remote to select the line input.
The VCR will record audio from the audio equipment
connected to the AUDIO IN 1 jacks.
Audio Connection
BACK of VCR
2. Use SPEED on the remote to select the recording speed.
3. Start audio source playing and press RECORD to begin
recording.
OUT
IN
ANT. IN
VIDEO
L
R
AUDIO RF OUT
CH. 4
3
4. Press STOP when you are finished.
Playing Back Audio Only
To get stereo sound, connect the AUDIO OUT jacks of the VCR to
the appropriate input on your amplifier or receiver. Do not use
the phono input. Refer to your amplifier or receiver user’s guide.
LEFT
RIGHT
OUT
IN
PHONO TUNER
TAPE
AUX
BACK of AMPLIFIER / RECEIVER
29
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO RDIN G
Usin g Tw o VCRs f o r Co p y in g a n d
Ed it in g Ta p e s
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram below.
2. Turn on both VCRs and TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or TV’s
video input).
4. If you are using coaxial cables for the connection, tune
recording VCR to channel 3 or 4—the one selected on the
playback VCR.
If you are using audio/video cables, select the line input on
the recording VCR.
5. Insert the tape you want to copy into playback VCR. Insert a
Caution:
blank tape with its safety tab in place into recording VCR.
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
6. Using visual search, locate the segment you want to copy on
the playback VCR. Pause the tape at this location.
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
Tw o VCR Connection
10. Repeat steps 6–9 to copy or edit additional segments.
CABLE BOX
IN
OUT
OR ANTENNA
PLAYBACK VCR
OUT
IN
ANT. IN
VIDEO
L
R
AUDIO RF OUT
CH. 4
3
OR
RECORDING VCR
OUT
IN
ANT. IN
VIDEO
L
R
AUDIO RF OUT
CH. 4
3
OR
TO TV
TO TV
30
Download from Www.Somanuals.com. All Manuals Search And Download.
pr o g r a m m in g t h e r em o t e
c o n t r o l y o u r o t h e r
c o m p o n e n t s...
Fir st t h in g s f ir st
1
2
3
4
The rem ote can be program m ed to control a
television.
Se t t in g Up t h e VCR
VCR Ba sic s
It is program m ed to control an RCA, GE, or
ProScan TV. O ther m anufacturer’s brands need to
be program m ed.
r e c o r d in g
PRO GRAM M IN G TH E
REM O TE
5
6
7
O t h e r FEATURES
Co n n e c t io n s
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Pr o g r a m m in g t h e Rem o t e
Ab o u t Pr o g r a m m in g t h e Re m o t e
The remote can be programmed to control other brands of
remote-controllable TVs. It is already programmed to operate
most RCA, ProScan, and GE televisions.
Pr o g r a m m in g t h e Re m o t e t o Co n t r o l
a TV
If the TV does not turn on when you press the TV button, the
remote needs to be programmed.
Follow these steps to program the remote to control your
particular TV:
1. Turn on the TV.
2. Find your TV brand and code number(s) on the code list on
the next page.
3. Press and hold the TV button on the remote.
4. Enter the two-digit code from the code list.
5. Release TV, and then press CHAN up or down. If the TV
responds to the remote commands, the remote is
programmed.
6. If the TV does not respond, repeat these steps using the next
code in the list.
O p e r a t e t h e TV
After you set up the remote, see which buttons operate your TV.
1. Point the remote at the TV, and press the TV button.
If the TV does not turn on, press the TV button and then
press the OFF button.
2. You may want to experiment to see which buttons operate
your TV. Try pressing buttons, such as VOL and MUTE. See
“TV Function Buttons” in the VCR Basic Section for details.
This remote may not operate all
models of the brands that are show n.
Note the difference betw een the TV
and VCR on-screen displays to see
w hich one the remote is operating.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
pr o g r a m m in g t h e r em o t e
TV Codes
NAD ........................................... 07
NEC ............................................ 06
Panasonic .................... 04,08,11
Philco ............................ 04,06,12
Philips ..................... 03,04,06,12
Pioneer ..................................... 06
Portland ............................. 06,12
ProScan .................................... 01
Proton ....................................... 06
Q uasar ...................................... 11
Radio Shack ............... 01,05,13
RCA ............................... 01,06,12
Realistic .................................... 05
Sam po ....................................... 06
Sam sung ...................... 06,09,12
Sanyo .................................. 05,08
Sears ...................... 01,05,06,07,
08,10,12
Akai ............................................ 03
AO C .................................... 06,12
Candle ....................................... 06
Citizen ....................................... 06
Colortym e ............................... 06
Concerto .................................. 06
Curtis Mathes ................. 01,06
Daewoo ............................. 06,12
Daytron ..................................... 06
Electrohom e ................... 06,12
Em erson ................................... 06
Envision ............................. 05,06
Fisher .................................. 05,08
GE ............................ 00,01,06,11
Goldstar ............................ 06,12
Hallm ark .................................. 06
Hitachi ............................... 06,14
Infinity ....................................... 04
J C Penney ......00,01,06,09,12
JBL .............................................. 04
Jensen ........................................ 06
JVC ....................................... 10,11
Kawasho ............................ 03,06
Kenwood ........................... 06,12
Loewe ........................................ 04
Luxm an .................................... 06
LXI ................................. 04,05,07
Magnavox .................... 04,06,12
Marantz ............................. 04,06
MGA .................................... 06,12
Mitsubishi ......................... 06,12
MTC ........................................... 06
Sharp .................................. 06,13
Sony............................................ 03
Soundesign .............................. 06
Sylvania ........................ 04,06,12
Technics .................................... 11
Techwood ................................ 06
Teknika ...................................... 06
TMK ........................................... 06
Toshiba ................... 05,07,08,09
Universal .................................. 00
Victor ......................................... 10
W ards ........ 00,01,04,06,12,13
Yam aha ..................................... 12
Zenith ........................................ 02
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
O TH ER FEATURES
f ea t u r es t o en h a n c e VCR o per a t io n
Fir st t h in g s f ir st
1
2
3
4
•
•
•
•
•
•
•
Picture Search O ptions
Pro-Tect Plus™ Locking
Tracking
Se t t in g Up t h e VCR
VCR Ba sic s
Tim e Counter
O n-Screen Displays
Audio Reception
Audio Playback
r e c o r d in g
PRO GRAM M IN G TH E
REM O TE
5
O TH ER FEATURES
Co n n e c t io n s
6
7
35
Download from Www.Somanuals.com. All Manuals Search And Download.
O TH ER FEATURES
Pic t u r e Se a r c h Op t io n s
The most basic way to search during playback is using the FWD or REV
buttons. This section contains several other options available for
searching a tape.
Fo r w a r d a n d Re v e r se Se a r c h
You can search a tape during playback. Sound is turned off during
picture search. Search works well for tapes recorded at either the SP or
SLP speed.
1. Pr ess FOR WARD to sear ch forward or REVERSE to sear ch in reverse .
2. Pr ess FOR WARD or REVERSE a gain or press PLA Y to return to
normal playback.
SLO W M O TIO N
You can view a tape during play or play-pause using slow motion. Slo w
motion works well for tapes recorded at the SP or SLP speed.
1. During playback,press PAUSE and then FOR WARD or REVERSE to
begin slow-motion playback,
2. Pr ess FOR WARD to incr ease or REVERSE to decr ease the speed of
the search.
3. Use TRACKING up or down to remove any streaks from the picture.
4. Pr ess PLA Y to return to normal playback.
The VCR switches automatically from slow-motion playback to stop
after a few minutes.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
O TH ER FEATURES
CO M M ERCIAL SCAN (SEARCH BUTTO N )
This is useful for skipping commercials or short program
segments.
1. Press SEARCH once during playback to advance the tape
approximately 30 seconds of recorded material.
2. Each press of the SEARCH button adds an additional 30
seconds up to five minutes.
FRAM E ADVAN CE
Frame advance lets you view one-stop action frame after another
during playback. Frame advance works well for tapes recorded at
the SP or SLP speed.
1. Pr ess PAUSE to “freeze” the action.
2. Pr ess F.ADV each time you want to view a frame of the scene.
3. Pr ess PAUSE or PLA Y to return to normal playback.
Go -To Se a r c h
GO-TO SEARCH
The Go-T o search feature enables the VCR to quickl y locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.
Current tape counter is
2:17:25
Press REV or FWD
to go to 0:00:00
1. Press ST OP.
Press SEARCH to exit.
2. Press SEARCH on the remote until the GO-TO SEARCH menu
appears on the screen.
3. Press number buttons to enter the hour(s) and/or minutes of
the counter reading you want the VCR to “go to”. Press
CLEAR on the r emote to cor rect an entry.
4. Pr ess FOR WARD to sear ch forward or REVERSE to sear ch in
reverse.
5. Pr ess ST OP to stop Go-T o searching.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
O TH ER FEATURES
IN DEX SEARCH
The VCR has a “VHS Index Search System” that automatically
records an index mark on the tape every time you start a
recording. During playback you can locate the program you want
to play by the number of index marks or by scanning. The VCR
will search forward or reverse from the location you are on
the tape.
To Se a rch :
1. Pr ess ST OP.
I NDEX S EARCH
2. Press SEARCH on the remote to display the INDEX SEARCH
menu on the TV screen.
P r e s s REV OR F WD
t o b e g i n s c a n n i n g
OR
e n t e r
i n d e x n u mb e r
a
s p e c i f i c
3. If you want to search through a certain number of index
marks, press two number buttons to enter the number of
marks you want to search. Press CLEAR on the remote to
correct an entry.
_
_
P r e s s S EARCH t o e x i t
I NDEX S EARCH
4. Press FWD to search forward or REV to search in reverse. The
VCR will locate your index mark and begin playback. If you
did not enter a specific index number, the VCR will locate the
next index mark and begin playback.
S e a r c h i n g f o r
i n d e x n u mb e r 1 2 . . .
5. Press STOP to stop index searching.
P r e s s S TOP t o c a n c e l
I NDEX S EARCH
Some index marks may be missed by the VCR:
•
•
A mark too close to your location on the tape.
S e a r c h i n g f o r
i n d e x ma r k s . . .
The mark at the beginning of a recorded segment of five
minutes or less.
•
The first index mark on the tape when you start at the
beginning of the tape.
P r e s s S TOP t o c a n c e l
Pr o -Te c t Pl u s™ Lo c k in g Fe a t u r e
To disable the usage of theVCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the VCR
or remote won’t work.
•
To Lock: Pr ess and holdVCR on the r emote for
approximately six seconds. SAFE appears in the display to let
you know the feature is activated.
•
To Unlock: Pr ess and holdVCR on the r emote for
approximately six seconds.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
O TH ER FEATURES
TRACKIN G
Your VCR has automatic tracking which r emoves the str eaks or
snow from the picture. Automatic tracking is activated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on a
different VCR. Just use the TRA CKING buttons to r emove the
streaks or snow.You can also use tracking when you pause a tape
to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking is
turned off.To turn automatic tracking back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it.
Tracking has no effect during recording--only playback.
Tim e Co u n t e r
The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.
0:30:00
Hours
Minutes
Seconds
For example, if you record a 30-minute program at the beginning
of the tape and you want to go to the end of that program to
begin another recording, you would:
1. Pr ess INFO t w ice to display the time counter.
2. Press CLEAR to reset the time counter to 0:00:00.
3. Press FWD to forward the tape until the time counter reads
0:30:00.
4. Pr ess ST OP.This is the a pproximate end of the program. (You
may want to press PLA Y to verify.) No w, you can begin
recording at this spot.
5. Press INFO twice to remove the time counter from the screen
and return to the normal display mode.
Locking Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
O TH ER FEATURES
S t o p
Ch 0 5
0 : 3 0 : 0 0
O N -SCREEN DISPLAYS
1
2
The INFO button sho ws the status of theVCR (ST OP,PLA Y,
RECORD , etc.), channel number, time counter, date, time , and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
1 1 / 1 8 / 9 7 Tu e 0 1 : 3 0 P M S LP
On-screen display
(times out)
1. Press INFO to see the on-screen displays.
2. Press INFO again to have only the time counter remain on
the screen.
0:30:00
3. Press INFO again to have no displays appear on the TV screen.
This is useful for dubbing tapes.
Turning off theVCR also r esets the displays.
Time counter only
(does not time out)
3
No displays will appear
(useful for dubbing)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
O TH ER FEATURES
Au d io Se t -Up Fe a t u r e s
The audio set-up features enhance your tape playback and
recordings. The features in this section are accessed through the
AUDIO men u and are shown in the displays below.
1. Press MENU to display the VCR MAIN MENU.
VCR MAI N MENU
1
2
3
4
5
6
7
0
VCR P l u s +
Ti me r Re c o r d i n g s
Ti me
Ch a n n e l s
P r e f e r e n c e s
Au d i o
La n g u a g e
Ex i t
2. Press 6 to display the AUDIO menu.
AUDI O
1
2
Re c e p t i o n :
Ta p e P l a y b a c k : HI - F I
S TEREO
0
Ex i t
Now you are ready to select an item from the menu to set up.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
O TH ER FEATURES
Re c e p t io n
Some TV programs are broadcast with stereo audio or a second
audio program (SAP) which off ers a second language.The
Reception feature lets you select the type of audio you want to
record. Press 1 to switch between Reception : STEREO, MONO,
and SAP.
•
•
Select STEREO for normal or stereo broadcast TV recording.
Select MONO if the stereo signal is weak and the sound is too
noisy.
•
Select SAP to record a second audio program instead of the
normal audio on both the hi-fi and linear tracks.
Ta p e Pl a y b a c k
The VCR records the same audio on both the Hi-Fi and linear
tracks on the tape. Hi-Fi sound is recorded on separate left and
right stereo channels. Monaural sound is recorded on the linear
track. Pr ess 2 to switch betweenTape Playback:HI-FI, LINEAR
and MIX.
To enjoy Hi-Fi sound, connect your VCR to a ster eo television or
amplifier/receiver using the audio/video jacks.The Tape Playback
feature lets you select which audio you play back.
•
Select HI-FI to play back sound recorded on the Hi-Fi track
and for normal use.
•
Select LINEAR to play back the sound recorded on the linear
monaural track, such as a second audio program (SAP), or a
dubbed voice-over.
•
Select MIX to play back the sound recorded on both the
linear track and the Hi-Fi track, sound-on-sound.
To receive Hi-Fi stereo sound, use
audio-video cables w ith a compatible
TV or receiver. Using only the RF OUT
jack w ill not produce stereo sound.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
c o n n e c t io n s
Th in g s t o Kn o w Be f o r e
Co n n e c t in g Co m p o n e n t s
Fir st t h in g s f ir st
1
2
3
4
Protect Your Components from Pow er Surges
Se t t in g Up t h e VCR
VCR Ba sic s
•
Connect all components before plugging any power
cords into the w all outlet.
•
Alw ays turn off theTV and other components before
you connect or disconnect any cables.
Position Cables Correctly to Avoid Audio Hum or
Interference
•
•
Insert all cable plugs firmly into their jacks.
r e c o r d in g
Place the audio/video cables to the sides of theTV’s back
panel instead of straight dow n the middle after you
connect your components.
•
•
Try not to coil any tw in-lead cables and keep them aw ay
from the audio/video cables as much as possible.
PRO GRAM M IN G TH E
REM O TE
5
Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed w ith
your unit.
O TH ER FEATURES
Co n n e c t io n s
Protect Your Components from Overheating
6
•
Do not block ventilation holes in any of the components.
Ar range the components so that air can circulate freely.
•
•
Do not stack components.
Allow adequate ventilation w hen placing your
components in a stand.
7
•
Place an amplifier or satellite receiver on the top shelf of
the stand so heated air rising from it w ill not flow
around other components.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
c o n n e c t io n s
Co n n e c t in g Yo u r VCR
Refer to these pages to help you connect your VCR.
Ja c k s a n d Ca b l e s
RF Jacks and Coaxial Cables (F-type)
The RF jacks provide good picture and mono sound quality, and
must be used if audio/video connections are not available for
your TV.
RF Jack
These jacks are required for antenna or cable-TV connections.
The RF jacks on the VCR are labeled ANT. IN and RF OUT. The
coaxial cable supplied with your VCR is used to connect the VCR’s
RF OUT jack and your TV’s antenna input.
Audio/Video Jacks and Cables (RCA-type)
The AUDIO/VIDEO jacks provide very good picture quality and
stereo sound, and can be used if your TV has audio/video input
jacks.
Audio/Video Jack
These jacks are used for most audio/video connections between
components. The VCR AUDIO/VIDEO jacks are color coded
(yellow for video, red for right audio, and white for left audio).
If your TV only has one input for audio (mono), you may need a
Y-adapter to hear sound from both channels.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
c o n n e c t io n s
Ch o o sin g a VCR Co n n e c t io n
There are several different ways to connect your VCR, depending on
whether or not you have cable service, and if you have a cable box,
and whether some of the channels are scrambled, and maybe you
have a satellite receiver along with cable (but no cable box), or a
satellite receiver and no cable or...well, you get the picture.
Five connections are described in this section and one of them should
provide you with a VCR connection that works.
•
•
•
TV with RF jack only
TV with audio/video jacks
TV with audio/video jacks and cable box to unscramble pay
channels only
If you need to connect additional components not shown in the
diagrams here (and are unsure of how to connect them), refer to the
instruction manual that came with that particular component.
Ad v a n t a g e s o f Au d io / Vid e o Ca b l e
Co n n e c t io n s
Using a simple coaxial cable connection gives you good picture
quality. If your television has audio/video jacks, I highly recommend
using them to get even better picture quality and stereo sound when
recording and playing back videotapes. These connections give you
more convenient operation by not having to share the TV’s
antenna signal.
Do n ’t Fo r g e t a b o u t t h e AUTO TV/ VCR
Fe a t u r e
The TV/VCR switch controls whether the picture signal is coming
from the VCR or the TV.
You can change the setting manually by using the TV•VCR button on
the remote or you can set the Auto TV/VCR feature to ON when
using only the ANT. IN and RF OUT jacks and OFF when using the
AUDIO/VIDEO output jacks – so your TV signal is not interrupted
when the VCR is turned on.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
c o n n e c t io n s
TV w it h r f j a c k o n l y
This connection assumes:
•
•
You are connecting antenna, cable, or cable box system.
Your television has only an RF input jack.
This connection provides:
•
•
Mono sound playback from VCR.
Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have:
•
(1) coaxial cable for cable or antenna connection; (2) for
cable box.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to channel 3 or 4, whichever one you selected
with the 3 CH. 4 switch on the back of the VCR.
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to ON.
To play a tape:
CABLE, CABLE BOX, OR ANTENNA
1. Insert a tape.
2. If necessary, press PLAY.
To record one program and w atch another:
VCR
1. Begin recording a program using one of the
recording features.
OUT
IN
ANT. IN
RF OUT
VIDEO
AUDIO
L
R
2. Press the TV•VCR button and select a different channel
on the TV.
3 CH. 4
TV
CABLE/
ANTENNA
46
Download from Www.Somanuals.com. All Manuals Search And Download.
c o n n e c t io n s
TV w it h Au d io / Vid e o j a c k s
This connection assumes:
•
•
You are connecting an antenna, cable, or cable box system.
Your television has audio/video jacks.
This connection provides:
•
•
Stereo sound playback from VCR.
Record one channel while watching another (except when
using a cable box for all channels).
To use this connection, you must have:
•
(1) coaxial cable for cable/antenna connection; (2) for
cable box
•
(3) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to its video input channel. Use of TV•VCR button is
not required.
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to OFF.
CABLE, CABLE BOX, OR ANTENNA
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record one program and w atch another:
VCR
1. Begin recording a program using one of the
recording features.
OUT
IN
ANT. IN
VIDEO
L
R
AUDIO RF OUT
3 CH. 4
2. Select a different channel on the TV.
TV
VIDEO
R
VIDEO
R
INPUT 1
INPUT 2
R
L
L/MONO
L/MONO
S-VIDEO
CABLE/
AUDIO
ANTENNA
OUTPUT
47
Download from Www.Somanuals.com. All Manuals Search And Download.
c o n n e c t io n s
TV w it h a u d io / Vid e o j a c k s a n d Ca b l e b o x
t o u n sc r a m b l e pa y c h a n n e l s o n l y
This connection assumes:
•
You are using a cable box only to unscramble premium
channels.
•
Your TV has audio/video input jacks.
This connection provides:
•
•
Stereo sound playback from VCR.
Recording a scrambled or unscrambled channel through the
cable box while watching an unscrambled channel.
To use this connection, you must have:
•
•
•
(3) coaxial cables
(3) audio/video cables
(1) splitter
To connect:
All scrambled channels must be view ed
through the VCR.
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
CABLE
Tune your TV to its video input channel. Use of TV•VCR button is
not required.
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to OFF.
CABLE BOX
IN
To play a tape:
OUT
1. Insert a tape.
2. If necessary, press PLAY.
VCR
To record a scrambled or unscrambled program and w atch
another unscrambled program:
OUT
IN
ANT. IN
VIDEO
L
R
AUDIO RF OUT
CH. 4
1. Begin recording a scrambled or unscrambled program
through the cable box using one of the recording features.
3
2. Select an unscrambled channel on the TV.
TV
VIDEO
R
VIDEO
R
INPUT 1
INPUT 2
R
L
L/MONO
L/MONO
S-VIDEO
CABLE/
ANTENNA
AUDIO
OUTPUT
48
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
This section gives you som e additional inform ation
about the VCR, including a description of the unit’s
controls and display.
You also will find a TroubleshootingTips section in this
Appendix, which m ight help to resolve som e of those
sim ple problem s.
Finally, this section contains your warranty inform ation.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
Fr o n t Pa n e l
.
.
VIDEOIN
Lmono •AUDIOIN •R
TI
MER
A
M
VCR
Remote Sensor
AUDIO (R a n d L) a n d VIDEO IN 2 Ja cks Receives signals from
another component, like a VCR or camcorder, when it is
connected to these jacks. Use INPUT on the remote to select “L2”
to record from these jacks.
CHANNEL•TRACKING Up o r Do w n Selects next higher or
lower channel in the VCR’s channel memory. Adjusts tracking
when a tape is playing. Press both together to recenter tracking.
FWD Forwards the tape when the VCR is stopped. Searches the
picture forward during playback. Starts slow motion during play-
pause and increases slow-motion speed.
PLAY•PAUSE Plays a tape. Pauses action for viewing during
playback. Pauses recording to prevent recording of unwanted
scenes.
POWER Turns the VCR on or off.
RECORD Starts VCR recording. Used for express recording.
Re m o t e Se n so r Receives signals from the remote control. Aim
the remote at this sensor.
REV Rewinds the tape when the VCR is stopped. Searches the
picture in reverse during playback. Starts slow motion during
play-pause and decreases slow-motion speed.
STOP•EJECT Stops the normal functions such as record,
playback, rewind, fast-forward, or pause. Ejects the tape when
the VCR is stopped.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
Disp l a y Pa n e l
TI MER
A
M
VCR
Tim e , Ch a n n e l Nu m b e r, Lin e In p u t In d ic a t o r (L1 ), o r S t a t u s
In d ic a t o rs
Tim e The current tim e appears. Only an AM indicator appears
with the tim e. There is no indicator for PM.
Ch a n n e l Nu m b e r o r Lin e In p u t In d ic a t o r The channel
num ber appears when the VCR is tuned to a channel. The line
indicator (L1) appears when the line input is selected.
S t a t u s In d ic a t o rs Show what the VCR is doing.
•
•
•
•
•
•
•
•
•
HI a n d BYE Turned on/unlocked; turned off
FF Fast forwarding
P LAY In playback (flashes during play-pause)
REC Recording (flashes when in Record Pause m ode)
REW Rewinding
R0 :3 0 Express recording in progress
SAFE Pro-Tect Plus turned on
S CH a n d S CH– Forward and reverse search during playback
STOP Tape is stopped
TIMER Lights during express recording and when VCR is turned
off and set for tim er recording. Flashes when tim er recording is
set and there is no cassette in the VCR.
Ta p e S p e e d In d ic a t o r (S P a n d S LP ) Press SPEED to change
VCR In d ic a t o r (Applies only if the VCR Viewing Channel is 3
or 4). Press the TV•VCR button to turn on or off.
•
•
VCR indicator on: Picture from VCR.
VCR indicator off: Picture from TV channel.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
Ba c k Pa n e l
OUT
IN
ANT. IN
VIDEO
L
R
AUDIO RF OUT
3 CH. 4
3 CH. 4 Sw it ch Selects the channel to which you will tune
the TV to see the VCR picture if you connect the VCR using
one of the basic hookups.
AUDIO (R a n d L1) a n d VIDEO IN Ja cks Receives signals
from another component, like a VCR or camcorder, when it is
connected to these jacks. Use INPUT on the remote to select
“L” to record from these jacks.
AUDIO (R a n d L) a n d VIDEO OUT Ja cks Sends signals from
VCR to another component, like a TV or VCR, when it is
connected to these jacks.
ANT. IN Ja ck Receives a signal from an antenna or cable
system when attached.
RF OUT Ja ck Passes signal to TV using the cable supplied.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
Tr o u b l e sh o o t in g Tip s
No pow er
•
•
Check to make sure it is plugged into an operating outlet.
Check to make sure your connections are correct.
VCR does not respond to remote
•
•
•
•
Press VCR to set remote to control the VCR.
Check to make sure there are no objects between the VCR and remote.
The batteries may need changing.
Make sure the Remote VCR1/VCR2 setting is set to VCR1 so the remote that came packed with your VCR can operate it.
Remote no longer controls an RCA, ProScan, or GE TV
•
•
Press TV to set remote to control a compatible TV.
Check to make sure the remote is programmed to control an RCA, ProScan, or GE TV.
Remote no longer controls a compatible TV
•
•
•
•
•
Press TV to set remote to control the corresponding component.
Check to make sure there are no objects between the component and remote.
The batteries may need changing.
Reprogram remote after batteries have been changed.
Remove batteries and hold number button 1 for at least 60 seconds to drain the microprocessor inside the remote.
Release number 1, replace the batteries, and (if necessary) reprogram the remote.
Poor or no picture for normal TV view ing
•
•
•
Check to make sure the VCR indicator is off.
Check to make sure the TV is switched to an active channel.
Check to make sure the antenna connections are secure and correct.
Snow y or no picture during playback
•
•
Press TV•VCR to turn VCR indicator on.
Check TV channel selected (3 or 4) to make sure it matches the channel selected with 3 CH. 4 switch on
back of VCR.
•
•
•
•
•
Check to make sure the TV’s fine tuning is correct for the channel you have selected.
Check video cable connections between VCR and TV monitor.
Check to make sure the TV monitor is set to video input.
Try another tape.
Some snow/streaks are normal during search, stop action, frame advance, and slow-motion playback.
continued on next page
53
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
Streaks in picture during normal playback
•
•
Press one of the TRACKING buttons to move streaks up or down for the best picture.
Check to make sure the tape is of good quality and not worn out.
Time counter not w orking or time counter not w orking in search modes
•
The time counter does not advance during unrecorded portions of tape. When an unrecorded
segment of tape is encountered, the time counter will hold its count until recorded material is
detected again.
•
•
A minus (–) will appear in front of the time if you rewind the tape farther back than a counter
reading of 0:00:00.
The time counter disappears during search; this is normal.
Will not record or play
•
•
•
•
•
Check to make sure there is a tape in the VCR.
Try ejecting and reinserting the cassette.
Check to make sure the tape is not broken.
Check to make sure the VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback.
Check the ProTect Plus™ feature.
Rew ind does not operate
•
Check to make sure the tape is not already rewound.
VCR Plus+ or timer recording not made or w rong program recorded
•
•
•
•
•
•
Check to make sure the correct VCR Plus+ code is entered.
Check to make sure the cable box or satellite receiver was turned on when recording was to begin.
Check to make sure the program was entered correctly (wrong channel or times).
Power interruption. Reset the clock.
Check to see if time and date are correct – including AM/PM.
Check to make sure the program did not exceed the tape’s length or the tape was not rewound
beforehand.
•
•
•
•
Check to make sure the VCR was turned off at the time recording was to start.
Check to make sure there was a tape in the VCR and the cassette’s safety tab was intact.
VCR ejects cassette when the end of the tape is reached during a timer recording.
Check to make sure VCR Plus+ setup was completed correctly.
Will not record
•
•
Check to make sure the safety tab is intact.
Check to make sure the VCR is not in the line mode. Press INPUT on the remote.
Clock show s incorrect time or date
•
•
•
Power interruption.
Check to make sure the clock is set accurately (check AM/PM and date).
Check Daylight-Saving setting. The clock may have adjusted for daylight-saving time.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
Time did not adjust for daylight-saving time
•
Check to make sure daylight-saving feature is set correctly.
VCR makes noise w hen stopped
•
VCR is removing tape from heads. This is normal. The head cylinder inside the VCR will continue to rotate for a few
minutes after you put the VCR in the stop mode.
Will not AUTO CHANNEL SEARCH active channels correctly
•
•
•
Check to make sure the antenna connections are secure and correct.
Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.
If Detect Automatically was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either CABLE
TV or ANTENNA instead.
•
May not be necessary if using a cable box for all channels. Contact your local cable company for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE.
Cassette w ith safety tab removed does not start to play automatically
•
Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER indicator flashes
•
Check to make sure there is a cassette in the VCR when a timer recording is set.
Time counter disappears during searching
•
This is normal.
On-screen menus appear in English, French, or Spanish
•
Check LANGUAGE feature.
No stereo sound during playback
•
Check to make sure the Tape Playback feature is set to HI-FI to hear stereo sound during playback. The tape you are
playing must be recorded in HI-FI in order to play back in HI-FI.
•
Must use the AUDIO/VIDEO jacks on the back of the VCR to hear stereo sound.
Stereo audio too noisy
•
•
Stereo signal is weak. Set Reception: STEREO/SAP/MONO feature to MONO.
Press one of the TRACKING up or down buttons to minimize the noise.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
Lim it e d Wa r r a n t y
What your w arranty covers:
•
Any defect in materials or workmanship.
For how long after your purchase:
•
•
Ninety days for labor charges.
One year for parts.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm,
whichever comes first.
What w e w ill do:
•
•
Pay any Authorized RCA VCR Service Center the labor charges to repair your VCR.
Pay any Authorized RCA VCR Service Center for the new or, at our option, refurbished replacement parts required to
repair your VCR.
How you get service:
•
Take your VCR to any Authorized RCA VCR Service Center. To identify your nearest Authorized RCA VCR Service Center,
ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
•
•
Show the Authorized Service Center Representative your evidence or purchase date or first rental.
Pick up your VCR when repairs are completed.
What your w arranty does not cover:
•
Customer instruction. (Your Owner’s Manual clearly describes how to install, adjust, and operate your VCR. Any
additional information should be obtained from your Dealer.)
•
•
•
•
•
•
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/audio heads.
Batteries.
A VCR that has been modified or incorporated into other products or is used for institutional or other commercial
purposes.
•
•
A VCR purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your VCR. It will make it easier to contact you
should it ever be necessary. The return of the card is not required for warranty coverage.
How state law relates to this w arranty:
•
This warranty gives you specific legal rights and you also may have other rights that vary from state to state.
If you purchased your VCR outside the United States:
•
This warranty does not apply. Contact your dealer for warranty information.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
a p p e n d ix : r e f e r e n c e
Sp e c if ic a t io n s
Fo rm a t :
VHS
Re co rd /Pla yb a ck
Syst e m :
Video: 4-head
Audio: 2 Hi-Fi record/playback system
Vid e o Sig n a l Syst e m :
An t e n n a :
EIA standard: NTSC color
75-ohm external VHF/UHF combined
antenna terminal
Tu n e r:
USA:
181 channels capability*
(125 cable channels)
Canada: 178 channels capability*
(122 cable channels)
Typ e :
AutoProgramming frequency synthesis
120V AC, 60 Hz
Po w e r Re q u ire m e n t :
Po w e r Co n su m p t io n :
Dim e n sio n s:
19 watts
35.4 inches high (90 mm)
14.2 inches wide (360 mm)
10.75 inches deep (273 mm)
We ig h t :
7.5 pounds (3.7 kg)
St o ra g e Te m p e ra t u re
Ra n g e :
- 22˚F to +149˚F
(-30˚C to +65˚C)
Op e ra t in g
+41˚F to +104˚F
(+5˚C to +40˚C)
Te m p e ra t u re Ra n g e :
*Check your cable company‘s compatibility requirements.
Cl e a n in g t h e VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to
dust your VCR. Remove dust from the ventilation holes on the
top, back, sides, and bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol
and various solvents. Avoid excessive use of oil-based furniture
polishes since the materials used in the cabinet will accumulate
more dust. We recommend using a nonabrasive, antistatic
cleaner and polisher.
Specifications are subject to change.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
3 CH. 4 switch 5, 52
Channels, add or remove 10
Channels list, VCR 8
Choosing a VCR connection 45
Cleaning the VCR 57
A
CLEAR button 18, 19
Clearing programs 28
Commercial scan 37
Accessing menus 5
Add or remove channels 10
ANT. IN jack 5, 52
Audio
Component buttons 18
Connecting your VCR 4, 44
Connections 43
HI-FI 42
LINEAR 42
audio/video cable 45
MIX 42
TV with audio/video jacks 47
TV with audio/video jacks and cable box to unscram
48
MONO 42
SAP 42
Stereo 42
TV with RF jack only 46
two VCRs 30
Audio features, Set-up 41
Audio only recording 29
Audio reception 42
Audio/video jacks 5, 18, 50, 52
Auto channel search 9
Auto play feature 6, 15, 20
Auto TV/VCR 15, 45
Automatic rewind 21
Automatic tracking 20
Copying and editing tapes 30
D
Date and time setting 11
Daylight-saving time 10
Detect Automatically 9
Display Panel 51
Displays
on-screen 40
B
Back panel 52
E
Basics, learn the 17
Batteries
Eject 21
installing in the remote 4
Broadcast stereo TV recording 28
EnergySaver 16
Express recording 24
C
F
Cables 44
F.ADV button 18
positioning 43
First setup 3
CHAN buttons 18, 19
Channel List 26
Forward and Reverse Search 36
Frame advance 37
Front panel 50
Channel, VCR viewing 5
CHANNEL•TRACKING button 50
FWD button 18, 50
58
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
G
N
GO BACK button 18, 19
Go-To Search 37
Number buttons 5, 11, 19
O
H
OFF button 18, 19, 20
On-screen displays 40
Overheating 43
HI-FI 42
I
P
Important information 2
Index search 38
PAUSE button 19
INFO button 18, 19
INPUT button 18
Picture search options 36
PLAY button 19, 36, 50
Playing a Tape 20
Plugging in the VCR 5
POWER button 21, 50
Power surges 43
J
Jack
PREFERENCES menu 14
Pro-Tect Plus 38
ANT. IN 52
RF OUT 52
Jacks
Problem solving 53
Product registration 2
Programming the remote
to operate a TV 32
Audio/video 52
Jacks, types of 44
L
R
Language feature 8
Limited warranty 56
LINEAR 42
Reception
MONO 42
SAP 42
Locking feature 38
LP 20
Stereo 42
RECORD button 19, 50
Recording 21
audio only 29
broadcast stereo TV 28
copying and editing tapes 30
express 24
M
MENU button 5, 18
MIX 42
MONO 42
SAP 28
MUTE button 19
timer 25
59
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
VCR plus+ 26
XPR 24
SPEED button 19
Status Indicators
FF 51
Remote
buttons 18
HI and BYE 51
PLAY 51
installing batteries 4
TV function buttons 19
Remote Control Option 14
Remote sensor 50
R0:30 51
REC 51
REW 51
Remote VCR1/VCR2 option 14
Remove or add channels 10
REV button 19, 50
SAFE 51
SCH and SCH- 51
STOP 51
Review programs screen 28
Reviewing programs 28
Rewind, automatic 21
RF OUT jack 5, 52
Stereo 42
STOP button 19, 50
Stopping a timer recording 28
T
S
Tape eject 21
Safety tab 21
Tape Playback 42
Tape Speed Indicator 51
Tape Speeds 20
SAP 42
SAP, recording 28
Search
Time and date setting 11
Time counter 39
Commercial Scan 37
forward and reverse 36
frame advance 37
Go-To 37
Timer recording 24, 25
stopping 28
with VCR Plus+ 24
Tips, troubleshooting 53
Tracking 39
index 38
slow-motion 36
SEARCH button 19
Set time and date manually 11
Set up
TRACKING buttons 19
Troubleshooting tips 53
TV button 18
first 3
TV codes 33
language 8
TV function buttons 19
TV•VCR button 19
using menus 8
Set up the VCR 7
Signal type, changing 10
Slow-motion search 36
SLP 20
V
VCR button 18
Solving problems 53
SP 20
VCR channel list 8
VCR, cleaning 57
Specifications 57
60
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
VCR Indicator 51
VCR Plus+
setting up channels 12
worksheet for channels 12
VCR Plus+ channel list 12
Canada 13
USA 12
VCR Plus+ channels 12
VCR Plus+ recording 27
VCR viewing channel 5
VOL buttons 20
W
Warranty, limited 56
X
XPR (express recording) 24
61
Download from Www.Somanuals.com. All Manuals Search And Download.
If your VCR needs service, please contact your dealer or the
nearest Servicenter from the yellow pages. Please do not
send any products to the Indianapolis address listed in this
manual or on the carton. This will only add delays in service
for your product.
10330 North Meridian Street
Indianapolis, IN 46290
©1997 Thomson Consumer Electronics, Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
Printed in Japan
TOCOM 15313880 rev. 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|