VR609HF
USER’S
GUIDE
VIDEO CASSETTE RECORDER
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Table of Contents
Frame Advance ___________________ 16
Slow Motion______________________ 16
Automatic Tracking _______________ 16
Manual Tracking__________________ 16
DISPLAY Button __________________ 17
Time Counter_____________________ 17
Commercial Scan _________________ 18
Index Search _____________________ 18
Zero Search ______________________ 19
Important Information
Warnings______________________________ i
Cautions ______________________________ i
Note to Cable TV Installer _______________ i
Product Registration ____________________ i
Hooking Up the VCR
Choosing a Hookup ____________________ 2
Antenna or Cable System Without a
Cable Box _________________________ 3
Cable System With Cable Box to
Tape Playback: HI-FI/LINEAR/
MIX Feature ____________________ 19
Unscramble All Channels ___________ 4
Cable System With Cable Box to
Recording a Program
Types of Recordings___________________ 20
Recording Speeds _____________________ 20
Recording Pause ______________________ 20
Basic Recording Ð
Unscramble Pay Channels Only______ 5
Connecting Two VCRs for Copying
Tapes_____________________________ 6
Operating Instructions _____________ 21
Watch a TV Channel While VCR
is Recording a Different Channel ____ 21
Recording While You're Away
Setting Up the VCR
Startup
Check Accessories With VCR ________ 7
Insert Batteries in Remote ___________ 7
Turn on the TV ____________________ 8
Turn on the VCR___________________ 8
Place Channels in VCR's Memory ____ 8
Add or Remove Channels from
Timer Recording __________________ 22
Checking or Clearing
Timer Recordings_______________ 23
Timer Recording From the
VCRÕs Line Input _______________ 23
Recording Broadcast Stereo TV or SAP___ 24
Recording Audio Only_________________ 25
VCR's Memory __________________ 9
Select a Language/Choisissez une
Langue_________________________ 9
Set the Time and Date ______________ 9
Use TV•VCR Button _______________ 10
Set Auto TV/VCR Feature___________ 10
Express Recording (XPR)_______________ 26
Using Two VCRs for Copying
and Editing Tapes _________________ 27
References
Using the Remote Control
Controlling a TV ______________________ 11
Remote Control ____________________ 12-13
Location of Controls
Front Panel_______________________ 28
Back Panel _______________________ 29
Display Panel_____________________ 30
Specifications_________________________ 31
Cleaning the VCR _____________________ 31
Trouble Checks ____________________ 32-33
Limited Warranty _____________________ 34
Index _____________________________ 35-37
Playing a Tape
Operating Instructions_________________ 14
Using the Playback Features
Auto Play Feature _________________ 15
Pause for Stop-Action______________ 15
Picture Search ____________________ 15
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Choosing a Hookup
The hookups on pages 3 through 5 are divided into two hookup types: Basic (A) and
Advanced (B).
The basic hookups show the backs of TVs that have only an antenna/cable connection. It is
the easier of the two and additional accessories may not be needed.
The advanced hookups show the VCR hooked up to a monitor/receiver (TV with audio
and video jacks). This connection may improve the picture quality as well as convenience
of operation.
Answer the questions to choose the hookup for your VCR.
1. How do you receive your TV signals?
Choose one answer from below.
A. Outside antenna Ð Turn to page 3.
B. Rabbit ears (set-top) and/or bow tie antenna Ð Turn to page 3.
C. Cable System Ð Go to question 2.
2. What type of cable-TV system* do you have?
Choose one answer from below.
A. Cable without a box Ð Turn to page 3.
B. Cable box to unscramble all the channels Ð Turn to page 4.
C. Cable box to unscramble only pay channels, such as HBO, Showtime,
Cinemax, etc. Ð Turn to page 5.
*You may need to contact your local cable company for assistance.
Optional Hookups
How to hook up two VCRs for copying tapes?
A. Select a hookup by answering the questions above.
B. Then modify the connections as shown on page 6.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Antenna or Cable System Without a Cable Box
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Antenna
or Cable
300/75 Ohm
Adapter
Back of VCR
1. Set the CH3 CH4 switch on back of VCR
to either channel 3 or 4.
VIDEO
AUDIO
ANT. IN
RF OUT
You will tune the TV to this channel and use the
L
R
OR
TV•VCR button to watch the VCR.
IN
OUT
CH.
2. Connect as shown.
3
4
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR and TV.
Continue to page 7.
4.
75 to 75/300 Ohm
Separator
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Use this hookup for slightly improved
picture quality, hi-fi stereo playback, and
more convenient operation Ñ use of
TV•VCR button not required.
From Antenna
or Cable
300/75 Ohm
Adapter
1. Connect as shown.
Back of VCR
This connection requires additional accessories
not provided.
VIDEO
AUDIO
ANT. IN
RF OUT
L
R
If your TV is not stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
OR
IN
OUT
CH.
3
4
2. Plug in power cords of VCR and TV.
Continue to page 7.
3.
RF Coaxial Cable
(supplied)
Audio/Video Cables
VIDEO
INPUT
You will tune the TV to its video input to
watch the VCR.
L /
MONO
Set the Auto TV/VCR feature to OFF. See
page 10.
OUT AUDIO
RIGHT
IN
S-VIDEO
CABLE /
ANTENNA
Back of TV
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble All Channels
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Cable
1. Set the CH3 CH4 switch on back of VCR
Back of VCR
to either channel 3 or 4.
RF Coaxial
Cable
Cable Box
VIDEO
AUDIO
R
ANT. IN
RF OUT
You will tune the TV to this channel and use the
L
IN
OUT
IN
TV•VCR button to watch the VCR.
OUT
CH.
3
4
2. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR, TV, and
cable box.
75 to 75/300 Ohm
Separator
Continue to page 7.
4.
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Use this hookup for slightly improved
picture quality, hi-fi stereo playback, and
more convenient operation Ñ use of
TV•VCR button not required.
Cable Box
From Cable
IN
OUT
1. Connect as shown.
This connection requires additional accessories
not provided.
RF Coaxial
Cable
Back of VCR
If your TV is not stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
VIDEO
AUDIO
ANT. IN
RF OUT
L
R
IN
2. Plug in power cords of VCR, TV, and
OUT
CH.
cable box.
3
4
Continue to page 7.
3.
RF Coaxial Cable
(supplied)
Audio/Video Cables
You will tune the TV to its video input to
watch the VCR.
VIDEO
INPUT
Set the Auto TV/VCR feature to OFF. See
page 10.
L /
MONO
OUT AUDIO
RIGHT
IN
S-VIDEO
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
CABLE /
ANTENNA
Back of TV
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble Pay Channels Only
(such as HBO, Showtime, Pay-Per-View, etc.)
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Cable
1. Set the CH3 CH4 switch on back of VCR
Back of VCR
to either channel 3 or 4.
RF Coaxial
Cable
Cable Box
VIDEO
AUDIO
R
ANT. IN
RF OUT
You will tune the TV to this channel and use the
L
IN
OUT
IN
TV•VCR button to watch the VCR.
OUT
CH.
3
4
2. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR, TV, and
cable box.
75 to 75/300 Ohm
Separator
Continue to page 7.
4.
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Cable Box
Use this hookup for slightly improved
picture quality, hi-fi stereo playback, and
more convenient operation Ñ use of
TV•VCR button not required.
From Cable
IN
OUT
Signal
Splitter
1. Connect as shown.
This connection requires additional accessories
not provided.
Back of VCR
If your TV is not stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
VIDEO
AUDIO
ANT. IN
RF OUT
L
R
IN
2. Plug in power cords of VCR, TV, and
OUT
CH.
3
4
cable box.
Continue to page 7.
3.
Audio/Video Cables
You will tune the TV to its video input to
watch the VCR. All pay channels are
viewed through the VCR.
VIDEO
INPUT
RF Coaxial
Cable
(supplied)
L /
MONO
OUT AUDIO
S-VIDEO
IN
CABLE /
ANTENNA
RIGHT
Back of TV
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
A
Option A hookup.
Use this hookup for a simple connection which
requires fewer accessories.
Playback VCR
From Antenna, Cable
or Cable Box
1. Select a hookup from pages 2 through 5
VIDEO
AUDIO
ANT. IN
RF OUT
L
R
and then modify with this connection.
IN
2. Set the CH3 CH4 switch on the playback
OUT
CH.
VCR to either channel 3 or 4.
3
4
You will tune the recording VCR to this channel
to receive the signal from the playback VCR.
RF Coaxial Cable
(supplied)
Recording VCR
3. Connect as shown.
This connection may require additional
accessories not provided.
VIDEO
L
AUDIO
R
ANT. IN
RF OUT
IN
4. Plug in power cords of VCRs and TV.
OUT
CH.
3
4
Continue to page 7.
5.
RF Coaxial
Cable
Audio/Video
Cables
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
B
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation Ñ use of
TV•VCR button not required.
Playback VCR (only)
VIDEO
AUDIO
ANT. IN
L
R
1. Select a hookup from pages 2 through 5
IN
and then modify with this connection.
RF OUT
OUT
CH.
2. Connect as shown.
3
4
This connection requires additional accessories
not provided.
If your other VCR is not stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
Audio/Video Cables
AUDIO
Recording VCR
VIDEO
ANT. IN
RF OUT
3. Plug in power cords of VCRs and TV.
L
R
IN
Continue to page 7.
4.
From Antenna, Cable
or Cable Box
OUT
CH.
3
4
You will select the line (audio/video)
input on the recording VCR to receive the
signal from the playback VCR.
RF Coaxial Cable
(supplied)
or
Audio/Video
Cables
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
1. Check accessories with VCR.
Contact your dealer if any items are missing.
POWER
VCR
TV
TV•VCR
CHAN
1
4
7
2
5
8
0
3
6
9
+
VOL
-
INPUT
PREV CH
MENU
PROG
CLEAR
DISPLAY MUTE
SEARCH
PLAY
2 “AA” Batteries
REW
FWD
STOP
SPEED
F.ADV
RECORD
SLOW
PAUSE
TRACKING
RF Coaxial Cable
(Stock No. 221392)
Remote
(Stock No. 233455)
2. Insert batteries in remote.
7
continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
3. Turn on the TV.
A. Turn on the TV.
B. If you used one of the basic hookups, tune the TV to
the channel selected with the CH3 CH4 switch on
back of VCR.
If you used one of the advanced hookups, tune the TV
to the TVÕs video input. (See TV ownerÕs manual for
details.)
4. Turn on the VCR.
A. Press VCR on the remote.
5. Place channels in the VCR’s memory.
The first time you turn on the VCR or after a power
AUTO CHANNEL SEARCH
Now scanning channel 45
Press any key to cancel
interruption, perform the AUTO CHANNEL SEARCH so
that your VCR can locate the channels available through
your signal typeÑcable or antenna. The signal type is
automatically selected when you perform the AUTO
CHANNEL SEARCH function. Also, if you change the
signal type, you will need to perform AUTO CHANNEL
SEARCH again.
A. Press MENU to display the VCR MAIN MENU on the
TV screen. If this menu does not appear:
¥ Make sure TV is tuned to same channel as the CH3
CH4 switch on the back of the VCR or the TVÕs
video input (refer to TVÕs manual).
¥ Press VCR, then press MENU again.
¥ If you use a basic hookup, check VCR indicator in
display panel Ð it should be on. Press TV•VCR to
turn it on.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
¥ Check the connections.
B. Press 3 to display the CHANNELS menu.
C. Press 1 to begin AUTO CHANNEL SEARCH.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
The VCR automatically selects CABLE (cable TV) or
ANTENNA. If you need to change the setting
manually, press 3.
CABLE
0 Exit
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV will then tune to the
lowest channel found. Pressing CHAN on the remote or
CHANNEL on the VCR up or down will select only the
active channels.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
6. Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of them are
not active, have weak signals, or you do not want to watch
them.
VCR MAIN MENU
We recommend channels be placed in memory using the
AUTO CHANNEL SEARCH feature described on the previous page
before adding or removing channels. Channels 1-125 and
VID1 were placed in memory at the factory.
1 Timer Recordings
2 Set Clock
3 Channels
CHANNELS
A. Press VCR on the remote.
1 Auto Channel Search
2 Add/Remove Channels
B. Press MENU on the remote to see the VCR MAIN MENU on
the TV screen.
ADD/REMOVE CHANNELS
C. Press 3 to display the CHANNELS menu.
D. Press 2 to display the ADD/REMOVE CHANNELS menu.
E. Follow the directions on the screen.
Channel 08
is presently ADDED
Press CLEAR to remove
Press MENU to exit
F. Add or remove more channels by entering channel
numbers or using CHAN up or down on the remote or
CHANNEL up or down on the VCR.
VCR MAIN MENU
7. Select a language./Choisissez une langue.
1 Timer Recordings
2 Set Clock
3 Channels
You can select the language for the displays on the VCR.
4 Preferences
5 Audio
6 Language
A. Press MENU on the remote to see the VCR MAIN MENU
on the TV screen.
LANGUAGE/LANGUE
B. Press 6 to display the LANGUAGE menu.
Select a Language.
Choisissez une langue.
C. Select English or French.
1➔English (anglais)
¥
¥
Press 1 to select English.
2 French (fran•ais)
Press 2 to select Fran•ais (French).
Press MENU to continue
8. Set the time and date.
When you first turn on the VCR, --:-- appears in the
clock area of the VCRÕs display panel.
VCR
SLP
A. Press MENU on remote to display the VCR MAIN MENU
VCR MAIN MENU
on the TV screen.
1 Timer Recordings
2 Set Clock
B. Press 2 to display SET TIME AND DATE.
SET TIME AND DATE
C. Enter the time and date with the number buttons on the
remote.
Time --:-- --
(hh:mm)
¥ Press 0 before single-digit numbers.
Date --/--/--
Example: press 0, then 5, then 0, then 7 for a time of
5:07. Press 1 for AM or 2 for PM.
Press MENU to cancel
¥ Press CLEAR on the remote to change incorrect entries.
D. Press MENU on remote to remove SET TIME AND DATE
from the TV screen and start the clock. The time will
appear in the VCRÕs display panel and the time and date
will appear on the TV screen when you press DISPLAY.
continued on next page
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
9. Use TV•VCR button.
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV•VCR button
lets you switch between the picture coming from the VCR
or the picture from the TV channel. This button lets you
record a program on the VCR while watching another
channel on the TV. Details are on page 21.
A. Press VCR to set the remote to control the VCR.
B. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
C. Press CHAN up or down on the remote or CHANNEL
up or down on the VCR to change channels on the
VCR.
The channel number changes in the display panel.
D. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display panel.
Change channels using the TVÕs remote.
E. Return the TV to the VCR viewing channel Ñ CH3
or CH4.
F. Press VCR, then TV•VCR to switch back to the picture
from the VCR.
10. Set Auto TV/VCR feature.
If you used one of the basic hookups and did not connect
the audio/video jacks of the VCR to the TV, leave the
Auto TV/VCR feature set to ON.
If you have connected your VCR using the audio/video
input of your TV, you can prevent the VCR indicator from
turning on automatically and interrupting the cable or
antenna signal to your TV.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
A. Press MENU on the remote to see VCR MAIN MENU
on the TV screen.
PREFERENCES
1 Auto Play:
2 Auto TV/VCR:
ON
ON
B. Press 4 to display PREFERENCES.
C. Press 2 to select Auto TV/VCR: ON or OFF.
¥ Select ON if you used one of the basic hookups and
watch the VCR on channel 3 or 4 of your TV. The
VCR will automatically switch the TV¥VCR setting
to VCR every time the VCR is turned on, a tape
with the safety tab removed is inserted, or you
press PLAY.
0 Exit
¥ Select OFF if you used one of the advanced
hookups and watch your VCR on the video input
channel of your TV. The VCR indicator will not
turn on automatically and the signal from your
antenna or cable to your TV will not be interrupted.
Pressing TV•VCR on the remote will still turn the
VCR indicator on or off and switch the antenna
signal.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Controlling a TV
The VCRÔs remote is preprogrammed to control the basic functions of a compatible
RCA, ProScan, or GE TV. The remote can also be set up to control other
manufacturerÔs brands. To program the remote, use the remote buttons that
correspond to your brand.
Program the remote for a TV
1. Turn on the TV.
Remote
Button
Remote
Button
2. Point the VCR
Brand *
Brand *
remote at the TV.
Akai
AOC
03
06
06
06
06
06
01,06
06
06
NAD
NEC
Panasonic
Philco
07
06
04,11
04,06
03,04,06
06
06
01
06
11
3. Hold the TV button
and press two
Candle
Citizen
Colortyme
Concerto
Curtis Mathes
Daewoo
Daytron
Electrohome
Emerson
Envision
Fisher
number buttons for
your brand. If the
TV changes
channels when the
CHAN up or down
button is pressed,
set up is complete.
Philips
Pioneer
Portland
ProScan
Proton
Quasar
Radio Shack
RCA
Realistic
Sampo
Samsung
Sanyo
06
06
01,05,13
01,06
05
4. Release the buttons.
05,06
05,08
00,01,06,11
06
06
06
5. Repeat steps 2 – 4
with two other
GE
06
Goldstar
Hallmark
Hitachi
Infinity
J C Penny
JBL
06,09
05,08
01,05,06,07,
08,10
06,13
03
buttons if the first
ones do not work.
Sears
04
00,01,06,09
04
Sharp
Sony
Jensen
JVC
06
Soundesign
Sylvania
Technics
Techwood
Teknika
TMK
Toshiba
Universal
Victor
06
04,06
11
06
06
06
05,07,09
00
10,11
03,06
06
04
06
04,05,07
04,06
04,06,12
06
06,12
06
Kawasho
Kenwood
Loewe
Luxman
LXI
Magnavox
Marantz
MGA
Mitsubishi
MTC
Helpful Hint: Notice the difference
between the TV and VCR on-screen
displays. This is one way to tell if the
remote is set to control the VCR or the TV.
10
Wards
00,01,04,06,
13
02
Zenith
* The remote may not be able to control every
model TV of the brands listed.
Operate the TV
After you have set up your remote to control your TV, test the TV buttons
to see which ones operate your TV.
1. Point the remote at the TV and press TV.
2. If TV does not turn on in step 1, press TV and then POWER.
3. Use the ÒTV Function ButtonsÓ as described on page 13.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Remote Control
Component Buttons
Press one of the buttons to set the remote to operate that component.
VCR
TV
Turns on a compatible RCA,
ProScan, or GE VCR and sets
remote to control the VCR.
Turns on a compatible RCA,
ProScan, or GE TV and sets the
remote to control the TV.
Used with POWER button to turn
on another brand of TV, other
than RCA, when the remote is
programmed to control that TV.
See page 11.
POWER
VCR
TV
TV•VCR
CHAN
1
4
7
2
5
8
0
3
6
9
VCR Function Buttons
+
VOL
-
INPUT
PREV CH
CHAN Up or Down
Selects next higher or lower
channel in the VCRÕs channel
memory.
MENU PROG
Displays the VCR MAIN MENU
on the TV screen.
MENU
PROG
CLEAR
DISPLAY MUTE
SEARCH
Removes a menu from the
screen.
CLEAR
PLAY
Resets time counter to 0:00:00.
Used to program the VCR.
REW
FWD
Allows you to change entries
when setting the clock or VCR for
a timer recording.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
STOP
SPEED
RECORD
SLOW
F.ADV
PAUSE
DISPLAY
Shows VCR operating displays
on the TV screen.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then
press the other two numbers.
TRACKING
Displays the time counter.
PAUSE
FWD (Fast Forward)
Fast forwards the tape when the
VCR is stopped.
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
Searches the picture in forward
motion during playback.
PLAY
F.ADV (Frame Advance)
Lets you view one frame with
each press of the button while the
tape is paused.
Plays a tape.
POWER
Turns the VCR on and off.
INPUT
PREV CH (Previous Channel)
Turns the line input on or off.
VID1 appears in VCRÕs display
panel and VIDEO appears on TV
screen.
Switches between two channels.
Select one channel and then use
the number buttons to select
another. Press PREV CH to
switch between the two
channels.
Line input refers to the signal
coming from the component
connected to the AUDIO/VIDEO
IN jacks on the back of the VCR.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Remote Control
VCR Function Buttons
(continued)
RECORD
SLOW
TRACKING Up and Down
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Starts VCR recording.
Used for slow-motion playback.
Used for express recording (XPR).
See page 26.
SPEED (Tape Speed)
Selects a recording speed
(SP or SLP).
Reduces picture ÒjitterÓ during
stop-action playback.
REW (Rewind)
Rewinds the tape when the VCR is
stopped.
STOP
TV•VCR
Stops the normal functions such as
record, playback, rewind, fast
forward, and pause.
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 10.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX and ZERO
SEARCH menus on TV.
Lets you advance tape 60 or 120
seconds during playback.
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with every TV.
MUTE
PREV CH (Previous Channel)
CHAN Up or Down
Turns the TV sound on or off.
Switches between two channels.
Selects next higher or lower
channel in the TVÕs channel
memory when remote is set to
control a TV.
Select one channel and then use the
number buttons to select another.
Press PREV CH to switch between
the two channels.
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
CLEAR
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then press
the other two numbers.
Removes menus or status displays
from the screen.
Works as an ENTER key on some
TVs.
DISPLAY
Shows the status displays on the
screen.
VOL (Volume) Up and Down
Raises and lowers sound.
POWER
Turns off a compatible TV when
remote is set to control TV.
Removes menus or displays from
the screen.
Used with TV button to turn on a
compatible TV, other than RCA,
when the remote is programmed to
control that TV. See page 11.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Operating Instructions
To Play a Tape
1. Turn on the TV and tune it to channel 3, 4, or TVÕs video input
to see the picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator
lights, and the VCR indicator lights if the Auto TV/VCR feature
is set to ON. The tape automatically begins playback if the
safety tab on the cassette has been removed and the Auto Play
feature is turned on.
RECORD
REW PLAY• PAUSE FWD
POWER STOP• EJECT
CHANNEL
TRACKING
Safety Tab
3. Press PLAY on the remote or PLAY•PAUSE on the VCR, if
necessary. PLAY appears in the VCRÕs display panel.
4. Press TRACKING up or down to remove any streaks from the
picture, if necessary. Details are on page 16.
5. Press STOP on the remote or STOP•EJECT on the VCR.
6. Press REW. REW will appear in the VCRÕs display panel.
The VCR will automatically rewind the tape if it reaches the
end of the tape during playback. While rewinding, you can
press POWER and the VCR will turn off after rewinding.
7. Press STOP•EJECT on the VCR to eject the tape once it is
completely rewound.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Auto Play Feature
VCR MAIN MENU
This feature lets you tell the VCR whether you want it to automatically start playing
a tape that is inserted with the safety tab removed.
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
1. Press MENU on the remote to see the VCR MAIN
MENU on the TV screen.
PREFERENCES
1 Auto Play:
2 Auto TV/VCR:
ON
ON
2. Press 4 to display the PREFERENCES menu.
3. Press 1 to select Auto Play: ON or OFF.
¥ Select ON to have a tape with its safety tab
removed start playing automatically.
0 Exit
¥ Select OFF if you do not want a tape with its
safety tab removed to start playing
Pause for Stop Action
This feature stops the tape in action and allows you to examine the details of the
scene. Stop action works best for tapes recorded in the SP and SLP speed.
1. Press PAUSE on the remote or PLAY•PAUSE on the
VCR during playback to stop the action.
PAUS appears in the VCRÕs display panel.
Press TRACKING up or down during stop-action
pause to reduce picture ÒjitterÓ.
2. Press PLAY•PAUSE on the VCR or PLAY on the
remote to return to playback.
The VCR will automatically switch from stop-action
playback to stop after a few minutes.
Picture Search
You can search a picture during playback by fast forwarding or rewinding the tape.
Sound is turned off during picture search. Picture search works best for tapes
recorded in the SP and SLP speed.
Fast Forward Search
1. During playback, press FWD to search forward at a
faster-than-normal speed.
SRCH+ appears in the VCRÕs display panel.
2. To return to playback, press FWD, PLAY on the
remote, or PLAY•PAUSE on the VCR.
Rewind Search
1. During playback, press REW to search in reverse at
a faster-than-normal speed.
SRCH– appears in the VCRÕs display panel.
2. To return to playback, press REW, PLAY on the
remote, or PLAY•PAUSE on the VCR.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Frame Advance
Frame advance lets you view one stop-action frame after another. Frame advance works best
for tapes recorded in the SP or SLP speed.
1. Press PAUSE to stop the action.
PAUS appears in the VCRÕs display panel.
2. Press F.ADV each time you want to view a frame of the scene.
3. Press PAUSE or PLAY on the remote or PLAY•PAUSE on the
VCR to resume normal playback.
Slow Motion
You can view the picture in slow motion during play or play pause.
Sound is turned off during slow-motion playback. Slow motion works best in the SP or SLP
speed.
1. During playback, press SLOW to start slow-motion playback.
SLOW appears in the VCRÕs display panel.
2. Use TRACKING up or down to remove any streaks from the
picture.
3. Press PLAY on the remote or PLAY•PAUSE on the VCR to
return to playback.
The VCR will automatically switch from slow-motion playback
to stop after a few minutes.
Automatic Tracking
The VCR has automatic tracking which adjusts the picture when playing back a tape recorded
on another VCR. Automatic tracking is turned on whenever a tape is inserted or the VCRÕs
power is turned on.
Manual Tracking
Occasionally, you may need to manually adjust tracking on a tape recorded on a different VCR
or camcorder. The TRACKING buttons on the remote or VCR are used when playing a tape.
They have no effect during recording.
¥ When streaks or snow appear, press TRACKING up or down
for the best possible picture.
¥ Press TRACKING up or down during stop-action pause to
reduce picture ÒjitterÓ.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
DISPLAY Button
1. Press DISPLAY to display the status of the
VCR, channel number, time counter, date, time,
and tape speed on the TV screen. The VCR
status will appear in the display panel.
STOP CH 05 0:30:00
Press
DISPLAY
Status Displays
Will Time Out
The time and date must be set before they are
displayed. If you do not press DISPLAY again,
these displays will time out.
11/18/96 Mon 1:30AM SLP
2. Press DISPLAY again to have only the time
counter remain on the TV screen. The time
counter will appear instead of the time in the
VCRÕs display panel.
0:30:00
Hours
Minutes
3. Press DISPLAY again to remove the time
Press
DISPLAY
Again
counter from the TV screen.
Seconds
Time Counter Only
Will Not Time Out
The time counter will remain in the VCRÕs
display panel.
4. Press DISPLAY again to return to the normal
status displays.
The time will appear in the VCRÕs display
panel.
No Displays
Press
DISPLAY
Again
Turning off the VCR automatically returns the
displays to normal.
Time Counter
The time counter shows the elapsed time it takes to record a program or play
back a segment of a prerecorded tape. It helps locate the beginning or end of
programs you taped. The time counter resets to 0:00:00 whenever the tape is
ejected from the VCR.
For example, if a 30-minute program was recorded at the beginning of the tape,
you would:
0:30:00
1. Insert the prerecorded tape. Make sure the
tape is rewound. Press STOP on the remote or
STOP•EJECT on the VCR.
Hours
Minutes
Seconds
2. Press DISPLAY twice to display only the time
counter on the TV screen.
3. Press CLEAR to reset the time counter to
0:00:00.
4. Press FWD to fast forward the tape until the
time counter reads 0:30:00. Press STOP on the
remote or STOP•EJECT on the VCR.
This is the approximate end of the program
and you can begin recording at this spot.
5. Press DISPLAY to remove the time counter
from the screen and return to the normal
displays.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Commercial Scan (SEARCH Button)
This is useful for scanning commercials or short program segments.
1. Press SEARCH once during playback to advance the tape
approximately 60 seconds.
2. Press SEARCH twice during playback to advance the tape
approximately 120 seconds.
SRCH+ appears in the VCRÕs display panel.
Index Search
The VCR has a ÒVHS Index Search SystemÓ that automatically records an index mark on
the tape every time you begin recording a program. During playback you can locate the
program you want to play by the number of index marks.
INDEX SEARCH
The VCR will automatically locate the index number you select. The VCR will search
forward or reverse from the location you are on the tape.
Press REW or FF
to begin scanning
OR
Enter a specific
Index number
--
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote to display the INDEX
Press SEARCH to exit
SEARCH menu on the TV screen.
3. Press FWD or REW to search for the next index mark or
press two number buttons to enter the specific index
mark you want the VCR to search for.
Press CLEAR to correct an entry.
INDEX SEARCH
4. Press FWD to search forward or press REW to search in
reverse.
Searching for
Index number
03
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR.
¥ A mark too close to your location on the tape.
Press STOP to cancel
¥ The mark at the beginning of a recorded segment of
five minutes or less.
¥ The first index mark on the tape when you start at the
beginning of the tape.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Zero Search
The zero search feature allows you to quickly return to a counter reading of 0:00:00 at
any spot on the tape. This is convenient when you want to watch a segment of the tape
several times.
1. Insert the prerecorded tape and press STOP.
2. Press DISPLAY twice to display only the time
ZERO SEARCH
counter on the TV screen.
3. Locate the point on the tape that you want to
Current tape counter is
2:17:25
return to quickly.
Press REW to go to
0:00:00
4. Press CLEAR to reset the time counter to 0:00:00.
Press SEARCH to exit
5. You can continue to play the tape or perform other
functions. When you are finished, press STOP.
ÐORÐ
6. Press SEARCH twice to display the ZERO SEARCH
menu. The current tape counter is displayed.
ZERO SEARCH
7. Press REW to return to 0:00:00. When the VCR
reaches 0:00:00 it will begin playback.
Current tape counter is
-2:17:25
If the time counter reading has a minus (Ð ) in front
Press FF to go to
0:00:00
of it, press FWD to return to a reading of 0:00:00.
8. Press STOP to stop zero search.
Press SEARCH to exit
Tape Playback: HI-FI/LINEAR/MIX Feature
The VCR records the same audio on both the hi-fi and linear tracks on the tape. The
hi-fi stereo sound is recorded on separate left and right stereo channels. Monaural
sound is recorded on the linear track.
To enjoy hi-fi sound, connect your VCR to a stereo television or amplifier/receiver
using the audio/video jacks. The Tape Playback: HI-FI/LINEAR/MIX feature lets
you select which audio you play back.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
5 Audio
To Select Playback Sound
1. Press MENU to see the VCR MAIN MENU on the TV
screen.
2. Press 5 to see the AUDIO menu on the TV screen.
AUDIO
3. Press 2 to switch between HI-FI, LINEAR, or MIX
1 Reception:
STEREO
2 Tape Playback: HI-FI
sound.
¥ Select HI-FI to play back sound recorded on the
hi-fi track and for normal use.
0 Exit
The HI-FI indicator is lit in the VCRÕs display
panel during hi-fi playback.
¥ Select LINEAR to play back the sound recorded
on the linear monaural track.
¥ Select MIX to play back the sound recorded on
both the linear track and the hi-fi track, sound-
on-sound.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Types of Recordings
Your VCR provides different types of recording. These types are explained in the following sections:
Basic Recording Ð Operating Instructions
Recording While You're Away
Timer Recording
Recording Broadcast Stereo TV or SAP (Second Audio Program)
Recording Audio Only
Express (XPR) Recording
Using Two VCRs for Copying Tapes
Using the Recording Features
Recording Speeds
Press SPEED on the remote to select a recording speed (SP or SLP). The speed you
select appears on the TV screen and in the VCRÕs display panel. The VCR
automatically selects the playback speed (SP, LP, or SLP).
Cassette
Type
T120
Recording Time
SP
2Hr
SLP
6Hr
8Hr
T160
2Hr 40Min
SP (Standard Play) gives the best quality recording.
That is why most prerecorded, rental tapes are
recorded in SP. Fewer programs can be recorded on
the tape. Special effects such as pause, slow motion,
picture search, and frame advance work well.
SLP (Super Long Play) gives three times the recording
time of tapes recorded in SP. Special effects such as
pause, slow motion, picture search, and frame
advance work well.
Recording Pause
This feature allows you to prevent recording short passages of unwanted material.
Press PAUSE during recording to stop and start
recording. REC.P appears in the VCRÕs display panel.
The VCR will automatically switch from pause to stop
after a few minutes.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Types of Recordings
Basic Recording – Operating Instructions
To Make a Recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or TVÕs video input channel.
1. Insert a tape with safety tab in place.
The cassette-in indicator
lights in the VCRÕs display panel.
2. If using one of the basic hookups, make sure the VCR indicator appears in
the VCRÕs display panel. If not, press TV•VCR to turn it on.
3. Select recording speed using SPEED on the remote.
The tape speed indicator appears in the VCRÕs display panel and on the TV
screen.
4. Select the channel to be recorded.
The channel number appears in the VCRÕs display panel and on the TV
screen.
5. Press RECORD to begin recording. REC appears in the VCRÕs display
panel while the VCR is recording.
Watch a TV Channel While VCR is Recording a Different Channel
1. Follow steps 1 through 5 above.
2. If using one of the basic hookups, press TV•VCR to switch to the TV
channel. The VCR indicator will turn off in the display panel.
3. Select the channel you want to watch with the TVÕs channel buttons.
4. Press STOP on the remote or STOP•EJECT on the VCR when recording
is finished.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (Timer Recording)
The timer program feature lets you program the VCR to record up to eight different
programs within a one year period. Before setting the timer, make sure that:
¥ The clock is set correctly.
¥ A tape with safety tab has been inserted with enough tape to record the programs.
Setting a Timer Recording
1. Press MENU on the remote to display VCR MAIN MENU.
2. Press 1 to display TIMER RECORDINGS menu.
3. Press 1 to display Create a New Program menu.
VCR MAIN MENU
4. Press 1, 2, 3, or 4 to select type of program.
1 One time Ñ single program recorded once.
2 Daily Ñ program recorded at same time every day.
1 Timer Recordings
TIMER RECORDINGS
3 Weekdays Ñ program recorded at same
1 Create a New Program
time Monday through Friday.
4 Weekly Ñ program recorded at same time
once a week.
How often should this
program record?
1 One time
5. Press number buttons on the remote to enter the channel
number (use INPUT or 0, 0 to select video input), start time
including AM or PM, end time, and start date of the
recording. Just follow the on-screen prompts.
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
Program 1 (One time)
Press CLEAR to correct an entry.
Channel
--
6. Press SPEED on the remote to change recording speed.
Program 1 (One time)
7. Press MENU to enter your program. A reminder appears
which will time out or you can press MENU to return to the
VCR MAIN MENU.
Channel
08
Start time --:--
PROGRAMS OVERLAP may appear on the screen if you
Program 1 (One time)
have entered two programs where the times overlap.
Channel
Start time 02:10 AM 1=AM
End time --:-- 2=PM
08
8. The TIMER RECORDINGS menu appears. Press 1 to enter
an additional timer program, or press 0 to exit.
9. Turn off the VCR before recording begins.
Program 1 (One time)
Channel 08
Start time 02:10 PM
End time 03:35 PM
Start date 11/18/96 Mon
Tape speed SLP
1-SP 2-SLP
Press CLEAR to correct
Press MENU to save
TIMER appears in the VCRÕs display panel when the timer
has been programmed.
10. If using a cable box, leave it turned on and tuned to the
channel you want to record.
Stopping a Recording in Progress
Press and hold STOP on the remote or STOP•EJECT on the
Program 1 has been saved
VCR for approximately three seconds.
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away
Checking or Clearing Timer Recordings
VCR MAIN MENU
1. Press MENU on the remote to display VCR MAIN
MENU on TV screen.
1 Timer Recordings
2. Press 1 to display the TIMER RECORDINGS menu.
TIMER RECORDINGS
3. Press 2 for Review Existing Progs. feature.
1 Create a New Program
2 Review Existing Progs.
4. Press MENU to display information for the next
program.
Program 1 (One time)
5. Press CLEAR when the program you want to erase
appears on the screen.
Channel
Start time 02:10 PM
End time 03:35 PM
08
Start date 11/18/96 Mon
Tape speed SLP
Press CLEAR to erase
Press MENU for next prog
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO
and VIDEO IN jacks of the VCR. Recording from the line
input is convenient if you have a satellite receiver or
similar component attached to these jacks. To timer record
from the component connected to the VCRÕs line input:
Program 1 (One time)
Channel
Start time --:-- --
End time --:--
VIDEO
Start date --/--/--
Tape speed SLP
Press INPUT (or 0,0) to select VIDEO in place of the
channel number on the TV screen during timer
programming.
Press CLEAR to correct
Press MENU to exit
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording Broadcast Stereo TV or SAP
(Second Audio Program)
Some TV programs are broadcast with stereo audio or a second audio language (SAP). The
Reception: STEREO/MONO/SAP feature lets you select the type of audio you want to record.
To Record Stereo Broadcast TV or SAP
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or TVÕs video input.
1. Insert a tape with safety tab in place.
2. If using one of the basic hookups, make sure the VCR
indicator appears in the VCRÕs display panel. If not, press
TV•VCR to turn it on.
3. Use SPEED on the remote to select a recording speed.
The tape speed indicator appears in the VCRÕs display panel
and on the TV screen.
4. Select the channel or line input to be recorded.
The channel number or VIDEO appears on the TV screen.
5. Set the Reception: STEREO/MONO/SAP feature for the type
of audio you want to record.
VCR MAIN MENU
A. Press MENU to display the VCR MAIN MENU on the TV
1 Timer Recordings
2 Set Clock
3 Channels
screen.
4 Preferences
5 Audio
B. Press 5 to display the AUDIO menu.
C. Press 1 to select the type of audio Reception: STEREO,
MONO, or SAP.
AUDIO
¥ Set to STEREO for normal recording and to record
1 Reception:
STEREO
2 Tape Playback: HI-FI
broadcast stereo TV.
The STEREO indicator lights in the VCRÕs display panel
when the station you are tuned to is broadcasting stereo.
0 Exit
¥ Set to MONO if the stereo signal is weak and the sound
is too ÒnoisyÓ.
¥ Set to SAP to record SAP (second audio program)
instead of the main audio.
The SAP indicator lights in the VCRÕs display panel
when the station you are tuned to is broadcasting SAP.
D. Repeatedly press 0 to remove the menus from the TV
screen.
6. Press RECORD to start recording. REC appears in the VCRÕs
display panel.
7. Press STOP on the remote or STOP•EJECT on the VCR when
you are finished.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording Audio Only
You can record audio only from another audio source connected to the AUDIO IN (L and R) jacks on the back of the VCR. Any
video on the tape will be erased when you record audio only.
To Record Audio Only
1. Press the INPUT button to select a line input.
Press INPUT to record from the AUDIO IN jacks
on the back of the VCR. VID1 appears in the
VCRÕs display panel.
The VCR will record audio from the audio
equipment connected to the AUDIO IN jacks.
2. Use SPEED on the remote to select the recording
VCR MAIN MENU
speed.
1 Timer Recordings
The tape speed indicator appears in the VCRÕs
2 Set Clock
3 Channels
display panel.
4 Preferences
5 Audio
3. Make sure the Reception: STEREO/MONO/SAP
feature is set to STEREO.
AUDIO
A. Press MENU to display the VCR MAIN MENU
1 Reception:
2 Tape Playback: HI-FI
STEREO
on the TV screen.
B. Press 5 to display the AUDIO menu.
C. Press 1 to select Reception: STEREO.
0 Exit
4. Start audio source playing and press RECORD
to begin recording.
REC appears in the VCRÕs display panel.
5. Press STOP on the remote or STOP•EJECT on
the VCR when you are finished.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Express Recording (XPR)
Express recording lets you record up to four hours without using the timer program feature. The VCR will
turn off automatically at the end of the recording.
RECORD
REW PLAY• PAUSE FWD
POWER STOP• EJECT
CHANNEL
VCR
SLP REC
TRACKING
Display showing 30 minutes
remaining for recording.
RECORD
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on the remote.
5. Press RECORD twice to activate XPR recording.
6. Press RECORD repeatedly until the amount of recording time for the
program is displayed in the VCRÕs display panel or on the TV screen.
Press
RECORD
Recording
Time
REC
Ch 11
0:30
1:00
1:30
2:00
3:00
4:00
(30 Min)
(1 Hr)
Record Length 0:30
(1 Hr, 30 Min)
(2 Hrs)
Press REC to set length
(3 Hrs)
(4 Hrs)
Express Display on
TV Screen
(Normal Recording)
(Stops)
0:00
Each press increases the time Ñ 30 minutes up to two hours and then one
hour up to four hours.
The amount of time the VCR will record and REC will appear in the VCRÕs
display panel.
You can increase the amount of recording time by pressing REC
or RECORD.
Stopping a Recording in Progress
Press and hold STOP on the remote or STOP•EJECT on the VCR for
approximately three seconds.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Using Two VCRs for Copying and Editing Tapes
Operating Instructions (Refer to hookup on page 6.)
Use this VCR as the playback VCR and the other as the recording VCR.
1. Turn on the TV and VCRs.
2. Tune TV to the VCR viewing channel, either 3, 4, or TVÕs video input.
3. If you have connected your VCR using Option A (page 6), tune recording
VCR to channel 3 or 4 Ñ the one selected on the back of the playback VCR.
Caution: The unauthorized
recording of television
programs and other
If you have connected your VCR using Option B (page 6), press INPUT on
recording VCRÕs remote to select the line input (VID1).
materials may infringe the
rights of others.
4. Insert the tape you want to copy into playback VCR. Insert a blank tape
with safety tab in place into recording VCR.
5. Press PLAY, then PAUSE on playback VCR when you reach the point on
the tape or program where you want to begin copying. If the tape was not
recorded on the playback VCR, streaks may appear and you may need to
adjust tracking.
6. Press RECORD, then PAUSE, on recording VCR.
7. Press PAUSE buttons on both VCRs at the same time to begin copying the
tape.*
8. Edit out segments that you do not want to copy by pressing PAUSE on
recording VCR to stop copying the tape. Then locate the next segment you
want to copy on the playback VCR by using FWD, REW, and PLAY. Press
PAUSE on the playback VCR. Press PAUSE at the same time on both VCRs
to resume copying.
9. Press STOP on both VCRs when you are finished.
* You may turn off the TV after the recording has started as it does not have to
be on to copy a tape.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Front Panel
Tape Compartment
RECORD
REW PLAY• PAUSE FWD
POWER STOP• EJECT
CHANNEL
TRACKING
Remote Sensor
CHANNEL or TRACKING Up or Down
RECORD
Selects next higher or lower channel in
the VCR’s channel memory.
Start the VCR recording.
Used for express recording.
Adjusts tracking during playback or
pause.
Remote Sensor
Receives signals from the remote control.
Aim the remote at this sensor with no
objects between them.
FWD (Fast Forward)
Fast forwards the tape when the VCR is
stopped.
REW
Searches the picture forward during
playback.
Rewinds the tape when the VCR is
stopped.
PLAY•PAUSE
Searches the picture in reverse during
playback.
Plays a tape.
Pauses the tape for stop-action viewing
during playback.
STOP•EJECT
Stops the normal functions such as record,
playback, rewind, fast-forward, or pause.
Pauses the tape during recording to
prevent recording unwanted material.
Press when the VCR is stopped to eject the
cassette.
POWER
Turns the VCR on or off.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Back Panel
VIDEO
AUDIO
ANT. IN
RF OUT
L
R
IN
OUT
CH.
3
4
CH3 CH4 Switch
VIDEO and AUDIO (L and R) IN Jacks
Selects the channel to which you will tune the TV
to see the VCR picture if you connect the VCR
using one of the basic hookups.
Receives signals from another component, like a
VCR or camcorder, when it is connected to these
jacks. Use INPUT to select VID1 in the VCR’s
display panel.
ANT. (Antenna) IN Connector
VIDEO and AUDIO (L and R) OUT Jacks
Receives the signal from an antenna or cable
system that is attached to this connector.
Sends signals from VCR to another component,
like a TV monitor or VCR, when it is connected
to these jacks.
RF OUT Connector
Passes signal to TV using the cable supplied.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Display Panel
Cassette-in Indicator
STEREO
SAP
HI-FI
TIMER
VCR
SLP REC
AM
Tape Speed
Indicator
Time, Time Counter, Channel Number
(or Line Indicator), and Status Indicators
HI-FI Indicator
Cassette-in Indicator (
)
Lights during hi-fi playback when Tape Playback:
HI-FI/LINEAR/MIX feature is set to HI-FI.
Lights when a tape is in the VCR. Flashes while
tape is ejecting.
REC Indicator
Channel Number, Line Indicator (VID1), Time,
Time Counter, or Status Indicator
Lights when the VCR is recording.
The current time, time counter, channel number, or
line indicator (VID1) appears here.
SAP Indicator
Lights when the Reception: STEREO/MONO/SAP
feature is set to SAP, and the station you are tuned
to is broadcasting SAP.
Status indicators show what the VCR is doing.
BYE
Turned off
F.FWD
HI
Fast forward
Turned on
STEREO Indicator
Lights when the Reception: STEREO/MONO/SAP
feature is set to STEREO, and the station you are
tuned to is broadcasting stereo.
PLAY
PAUS
PAUS
REC
Playback
Frame advance
Play pause
Record
Record pause
Rewind
Tape Speed Indicators (SP or SLP)
REC.P
Press SPEED to change.
REW
Slow motion
Forward search
Reverse search
VCR stopped
Timer recording
TIMER Indicator
SLOW
SRCH+
SRCH–
STOP
Lights when a timer recording is set.
VCR Indicator (Applies Only to Basic Hookups)
Press TV•VCR to turn on or off.
T.REC
30
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Specifications
Format:
VHS
Record/Playback
Video: 4-Head
System:
Audio: 2 Hi-Fi record/ playback system
Video Signal System:
Antenna:
EIA standard: NTSC color
75-ohm external VHF/ UHF combined
antenna terminal
Tuner:
USA:
181 channels capability*
(125 cable channels)
Canada: 178 channels capability*
(122 cable channels)
Type:
AutoProgramming frequency synthesis
120V AC, 60 Hz
Power Requirement:
Power Consumption:
Dimensions:
19 watts
3.5 inches high
(90 mm)
14 inches wide
(360 mm)
12.2 inches deep
(313 mm)
Weight:
9.9 pounds
(4.5 kg)
Storage Temperature
Range:
- 22 F (- 30 C) to +149 F (+65 C)
˚
˚
˚
˚
Operating
Temperature Range:
+41 F (+5 C) to +104 F (+40 C)
˚
˚
˚
˚
*Check your cable company‘s compatibility requirements.
Cleaning the VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to dust your
VCR. Remove dust from the ventilation holes on the top, back, sides, and
bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the materials
used in the cabinet will accumulate more dust. We recommend using a non-
abrasive, anti-static cleaner and polisher.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Sometimes problems can be easily solved by checking a few basic things. Check below
before you call for help or take your VCR to an Authorized RCA VCR Servicenter.
Trouble
Here's what to try:
• Plug VCR into an operating outlet.
• Check connections.
No power
• Remove batteries and hold down one or more buttons for several seconds to
drain the microprocessor inside the remote to reset it. Reinstall the batteries
and try remote again.
VCR does not respond to remote
• Aim remote at VCR with no objects between them.
• Change batteries.
Remote no longer controls a compatible TV
• Press TV to set remote to control the corresponding compatible TV. See page 11.
• Reprogram remote for RCA TV. See page 11.
• Aim remote at TV with no objects between them.
• Change batteries.
• Remove batteries and hold down one or more buttons for several seconds to
drain the microprocessor inside the remote to reset it. Reinstall the batteries
and try remote again.
No picture when VCR turned on – using a basic
hookup
• Press TV•VCR to turn VCR indicator on. See page 10.
• Check to see if Auto TV/VCR feature is set to OFF. See page 10.
Poor or no picture for normal TV viewing
• Press TV•VCR to turn VCR indicator off.
• Switch TV to an active channel.
• Check antenna connections.
Snowy or no picture during playback
• Press TV•VCR to turn VCR indicator on.
• Check TV channel selected (3 or 4) to make sure it matches the channel
selected with CH3 CH4 switch on back of VCR.
• Check TV’s fine tuning.
• Check video cable connections between VCR and TV monitor.
• Set TV monitor to video input channel.
• Try another tape.
• Some snow/ streaks are normal during search, frame advance, slow-motion,
or stop-action playback.
Time counter not working
• The time counter does not advance during unrecorded portions of tape.
When an unrecorded segment of tape is encountered, the time counter will
hold its count until recorded material is detected again.
• A minus (–) will appear in front of the time if you rewind the tape farther
back than a counter reading of 0:00:00.
Will not record or play
• No cassette in VCR.
• Eject and re-insert cassette.
• Broken tape — try another cassette.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Trouble
Here's what to try:
• Some snow/ streaks are normal during search, frame advance, slow-motion,
or stop-action playback.
Streaks in picture during normal playback
• VCR is in pause mode. Press PAUSE.
Will not record
• Safety tab removed from cassette.
• Make sure the line indicator (VID1) is turned off in VCR’s display panel for
normal recording from the VCR’s tuner. Press INPUT to turn off the line
indicator.
• Tape already rewound.
Rewind does not operate
• Cable box was not turned on or was tuned to the wrong channel at time
recording was to begin.
Timer recording not made
or wrong program recorded
• Program entered incorrectly (wrong channel or times).
• Power interruption. Clock area in display panel will show - -:- -.
• Check to see if time and date are correct — including AM/PM.
• Check Signal Type: CABLE/ANTENNA feature. See page 8.
• Program exceeded tape’s length or tape was not rewound beforehand.
• VCR was not turned off at the time recording was to start.
• No tape in VCR or cassette’s safety tab broken off.
Clock shows incorrect time or date
VCR makes noise when stopped
• Power interruption. Clock on the front panel will show --:--.
• Clock was not set accurately (check AM/PM and date).
• Time counter display appears in VCR’s display panel. Press DISPLAY on
remote.
• VCR is removing tape from heads. This is normal. The head cylinder inside
the VCR will continue to rotate for a few minutes after you put the VCR in
the stop mode.
Will not auto channel search active
channels correctly
• Check antenna connections.
• Check Signal Type: CABLE/ANTENNA feature. See page 8.
Cannot select channels over 69
• Cable channels over 69 can only be selected if Signal Type:
CABLE/ANTENNA feature is set to CABLE. Details are on page 8.
Cassette with safety tab removed does not start to
play automatically
• Set Auto Play ON/OFF feature to ON. Details are on page 15.
Displays appear in wrong language
Stereo or SAP sound not recorded
• Language feature set incorrectly. Details are on page 9.
• Reception: STEREO/MONO/SAP feature must be set to STEREO to record
broadcast stereo. See page 24.
• Reception: STEREO/MONO/SAP feature must be set to SAP to record SAP.
See page 24.
• STEREO or SAP indicator not on. Station not broadcasting stereo or SAP.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Limited Warranty
What your warranty covers:
•
Any defect in material or workmanship.
For how long after your purchase:
•
Ninety days for labor charges.
•
One year for parts.
The warranty period for rental units begins with the first rental or 45 days
from the date of shipment to the rental firm, whichever comes first.
What we will do:
•
•
Pay any Authorized RCA VCR Servicenter the labor charges to repair
your VCR.
Pay any Authorized RCA VCR Servicenter for the new or, at our option,
refurbished replacement parts required to repair your VCR.
How you get service:
•
Take your VCR to any Authorized RCA VCR Servicenter. To identify
your nearest Authorized RCA VCR Servicenter, ask your dealer, look in
the Yellow Pages, or call 1-800-336-1900.
•
•
Show the service technician your evidence of purchase date.
Pick up your VCR when repairs are completed.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual clearly describes how to
install, adjust, and operate your VCR. Any additional information should
be obtained from your Dealer.)
•
•
•
•
•
•
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/ audio heads.
Remote control batteries.
A VCR that has been modified or incorporated into other products or is
used for institutional or other commercial purposes.
•
•
A VCR purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with
your VCR. It will make it easier to contact you should it ever be
necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
•
This warranty gives you specific legal rights, and you also may have
other rights that vary from state to state.
If you purchased your VCR outside the United States:
•
This warranty does not apply. Contact your dealer for warranty
information.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Controlling a Compatible TV . . . . . . . . . . . . . . .11
Copying and Editing Tapes . . . . . . . . . . . . . . . . .27
Copying Tape, Connections . . . . . . . . . . . . . . . . .6
— A
—
Accessories, Included . . . . . . . . . . . . . . . . . . . . . . .7
Add or Remove Channels from Memory . . . . . .9
ADD/REMOVE CHANNELS Menu . . . . . . . . . . . .9
ANT. (Antenna) IN Connector . . . . . . . . . . .3-6, 29
Antenna Connections . . . . . . . . . . . . . . . . . . . . .2,3
AUDIO and VIDEO Jacks . . . . . . . . .3-6,10,23,25,29
AUDIO Menu . . . . . . . . . . . . . . . . . . . . . . . .19,24,25
Auto Channel Search Feature . . . . . . . . . . . . . . . .8
Auto Play Feature . . . . . . . . . . . . . . . . . . . . . . .14,15
Auto TV/VCR Feature . . . . . . . . . . . . . . . . . . .3,4,10
Automatic Tracking . . . . . . . . . . . . . . . . . . . . . . .16
— D
—
Date, Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Design Specifications . . . . . . . . . . . . . . . . . . . . . .31
DISPLAY Button . . . . . . . . . . . . . . . . . . . .9,12-13,17
Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Displays, On-Screen . . . . . . . . . . . . . . . . . . . . . . .17
Displays, Status . . . . . . . . . . . . . . . . . . . . . . . .17,30
— B
—
— E
—
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Batteries, Inserting in Remote . . . . . . . . . . . . . . . .7
BYE Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Editing and Copying Tapes . . . . . . . . . . . . . . . . .27
Express Recording . . . . . . . . . . . . . . . . . . . . . . . . .26
Express recording, Stopping . . . . . . . . . . . . . . . .26
— F
—
— C
—
F.ADV (Frame Advance) Button . . . . . . . . . . .12,16
F.FWD (Fast Forward) Indicator . . . . . . . . . . . . .30
Fast Forward Search . . . . . . . . . . . . . . . . . . . . . . .15
First-Time Operation . . . . . . . . . . . . . . . . . . . . .7-10
Frame Advance . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
FWD (Fast Forward) Button . . . . . .12,17,18,19,28
Cable System With Cable Box
Connections . . . . . . . . . . . . . . . . . . . . . . . . .2,3-5
Cable System Without Cable Box
Connections . . . . . . . . . . . . . . . . . . . . . . . . . .2,3
Cable TV Installer, Note . . . . . . . . . . . . . . . . . . . . .i
Card, Registration . . . . . . . . . . . . . . . . . . . . . . . . . .i
Cassette-In Indicator . . . . . . . . . . . . . . . . . .14,21,30
CH3 CH4 Switch . . . . . . . . . . . . . . . . . . . . .3-6,8,29
CHAN and CHANNEL Up and Down
— H
—
Buttons . . . . . . . . . . . . . . . . . .8,9,10,11,12-13,28
Channel Number Indicator . . . . . . . . . . . . . . . . .30
CHANNELS Menu . . . . . . . . . . . . . . . . . . . . . . . . . .8
Checking Timer Programs . . . . . . . . . . . . . . . . . .23
Checks, Trouble . . . . . . . . . . . . . . . . . . . . . . . .32-33
Choisissez une Langue . . . . . . . . . . . . . . . . . . . . . .9
Choosing a Hookup . . . . . . . . . . . . . . . . . . . . . . . .2
Cleaning the VCR . . . . . . . . . . . . . . . . . . . . . . . . .31
CLEAR Button . . . . . . . . . . .9,12-13,17,18,19,22,23
Clearing Timer Programs . . . . . . . . . . . . . . . . . . .23
Codes, Compatible TVs . . . . . . . . . . . . . . . . . . . .11
Commercial Scan . . . . . . . . . . . . . . . . . . . . . . . . . .18
Compatible TV Chart . . . . . . . . . . . . . . . . . . . . . .11
Connections
HI Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
HI-FI Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .19,30
Hookups
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,3
Cable System With Cable Box . . . . . . . . .2,4,5
Cable System Without Cable Box . . . . . . . .2,3
Choosing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Two VCRs for Tape Copying . . . . . . . . . . . . .6
— I
—
Index Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
INDEX SEARCH Menu . . . . . . . . . . . . . . . . . . . . .18
INPUT Button . . . . . . . . . . .12,22,23,24,25,27,29,30
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,3
Cable System With Cable Box . . . . . . . . .2,4,5
Cable System Without Cable Box . . . . . . . .2,3
Choosing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Two VCRs for Tape Copying . . . . . . . . . . . . .6
(continued on next page)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
Playback, Slow Motion . . . . . . . . . . . . . . . . . . . . .16
PLAY•PAUSE Button . . . . . . . . . . . . . . . . .15,16,28
POWER Button . . . . . . . . . . . . . . . . .11,12-13,14,28
PREFERENCES Menu . . . . . . . . . . . . . . . . . . .10,15
PREV CH (Previous Channel) Button . . . . . .12-13
Problems, Solving . . . . . . . . . . . . . . . . . . . . . .32-33
Product Registration . . . . . . . . . . . . . . . . . . . . . . . .i
Program Remote to Control a TV . . . . . . . . . . . .11
PROGRAMS OVERLAP Screen . . . . . . . . . . . . . .22
— L
—
LANGUAGE Menu . . . . . . . . . . . . . . . . . . . . . . . . .9
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . .34
Line Input, Recording From . . . . . . . . . . . . . . . .23
— M
—
Make a Recording . . . . . . . . . . . . . . . . . . . . . . . . .21
Making a Timer Recording . . . . . . . . . . . . . . . . .22
Manual Tracking . . . . . . . . . . . . . . . . . . . . . . . . . .16
MENU PROG Button . . . . . . .8,9,10,12,22,23,24,25
MUTE Button . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
— R
—
REC Indicator . . . . . . . . . . . . . . .21,24,25,26,27,30,
REC.P (Record Pause) Indicator . . . . . . . . . .20,30
Reception: STEREO/MONO/SAP
Feature . . . . . . . . . . . . . . . . . . . . . . . .24,25,30
RECORD Button . . . . . . . . .12-13,21,24,25,26,27,28
Recording
— N
—
Note to Cable TV Installer . . . . . . . . . . . . . . . . . . .i
Number
Audio Only . . . . . . . . . . . . . . . . . . . . . . . . .25
Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Broadcast Stereo TV . . . . . . . . . . . . . . . . . .24
Express Recording . . . . . . . . . . . . . . . . . . .26
From the Line Input . . . . . . . . . . . . . . . . . .23
SAP (Second Audio Program) . . . . . . . . .24
Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Timer Recording . . . . . . . . . . . . . . . . . .22-23
Types of . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Two VCRs for Copying and Editing
Buttons . . .8,9,10,11,12,17,18,19,21,22,23,24,25
— O
—
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . .17
Operation
Basic Recording . . . . . . . . . . . . . . . . . . . . . . . .21
Copying Tapes . . . . . . . . . . . . . . . . . . . . . . . .27
Editing Tapes . . . . . . . . . . . . . . . . . . . . . . . . .27
Express Recording . . . . . . . . . . . . . . . . . . . . .26
First Time . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Playback Features . . . . . . . . . . . . . . . . . . .15-19
Recording Audio Only . . . . . . . . . . . . . . . . .25
Recording Broadcast Stereo TV . . . . . . . . . .24
Recording One Channel While
Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Registration Card . . . . . . . . . . . . . . . . . . . . . . . . . . .i
Remote Batteries, Inserting . . . . . . . . . . . . . . . . . .7
Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Remove or Add Channels from Memory . . . . . .9
REMOVE/ADD CHANNELS Menu . . . . . . . . . . . .9
REW (Rewind) Button . . . . . .12-13,14,15,18,19,28
REW Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Rewind Search . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
RF OUT Connector . . . . . . . . . . . . . . . . . . . .3-6, 29
Watching Another . . . . . . . . . . . . . . . . . . .21
Timer Recording . . . . . . . . . . . . . . . . . . . .22-23
— S
—
— P
—
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . .i
Safety Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
SAP (Second Audio Program), Recording . . . .24
SAP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .24,30
SAP, Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
SEARCH Button . . . . . . . . . . . . . . . . . . .12-13,18,19
Searching, Picture . . . . . . . . . . . . . . . . . . . . . . . . .15
Select a Language . . . . . . . . . . . . . . . . . . . . . . . . . .9
Selecting Playback Sound . . . . . . . . . . . . . . . . . .19
Sensor, Remote . . . . . . . . . . . . . . . . . . . . . . . . . . .28
PAUS Indicator . . . . . . . . . . . . . . . . . . . . . . . . .15,30
PAUSE Button . . . . . . . . . . . . . . . . . . . .12,15,20,27
Pause for Stop Action . . . . . . . . . . . . . . . . . . . . . .15
Pause, Recording . . . . . . . . . . . . . . . . . . . . . . . . . .20
Picture Search . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Play a Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
PLAY Button . . . . . . . . . . . . . . . . . . . .12,14,15,16,27
PLAY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Playback Sound, Selecting . . . . . . . . . . . . . . . . . .19
Playback Speeds . . . . . . . . . . . . . . . . . . . . . . . . . .20
36
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
Set Clock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Set the Time and Date . . . . . . . . . . . . . . . . . . . . . . .9
SET TIME AND DATE Menu . . . . . . . . . . . . . . . . .9
Setting a Timer Recording . . . . . . . . . . . . . . . . . .22
Setting Up the VCR . . . . . . . . . . . . . . . . . . . . . .7-10
Signal Type: CABLE/ANTENNA Feature . . . . . . .8
SLOW Button . . . . . . . . . . . . . . . . . . . . . . . .12-13,16
SLOW Indicator . . . . . . . . . . . . . . . . . . . . . . . .16,30
Slow Motion Playback . . . . . . . . . . . . . . . . . . . . .16
SLP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .20,30
SLP Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Solving Problems . . . . . . . . . . . . . . . . . . . . . . .32-33
SP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .20,30
SP Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
SPEED Button . . . . . . . . . .12-13,20,21,22,24,25,26
Speeds, Recording . . . . . . . . . . . . . . . . . . . . . . . . .20
SRCH + and – Indicators . . . . . . . . . . . . . .15,18,30
Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10
Status Displays . . . . . . . . . . . . . . . . . . . . . . . . .17,30
STEREO Indicator . . . . . . . . . . . . . . . . . . . . . .24,30
Stereo TV, Recording . . . . . . . . . . . . . . . . . . . . . .24
Stop Action Pause . . . . . . . . . . . . . . . . . . . . . . . . .15
STOP Button . . . . . . .12-13,17,18,19,21,22,24,26,27
STOP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Stopping a Timer Recording . . . . . . . . . . . . . . . .22
Stopping an Express Recording . . . . . . . . . . . . .26
STOP•EJECT Button . . . . . . .14,17,21,22,24,26,28
TV, Turn On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
TV•VCR Button . . . . . . . . . . . . . . . . .10,12-13,21,24
Types of Recordings . . . . . . . . . . . . . . . . . . . . . . .20
— U
—
Use TV•VCR Button . . . . . . . . . . . . . . . . . . . . . . .10
— V
—
VCR Controls . . . . . . . . . . . . . . . . . . . . . . . . . .28-30
VCR Indicator . . . . . . . . . . . . . . . . .8,10,12,14,21,30
VCR MAIN MENU . . . . . . .8,9,10,15,19,22,23,24,25
VCR, Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
VCR, Turn On . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
VCRs Memory, Placing Channels In . . . . . . . . . .8
VCRs, Connecting for Tape Copying . . . . . . . . . .6
VID1 Indicator . . . . . . . . . . . . . . . . . . . . . .9,25,29,30
VIDEO Indicator . . . . . . . . . . . . . . . . . . . . . . . .23,24
VOL (Volume) Buttons . . . . . . . . . . . . . . . . . .12-13
— W
—
Warranty, Limited . . . . . . . . . . . . . . . . . . . . . . . . .34
Watch One Channel While Recording
Another . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
— T
—
— X
—
T.REC (Timer Recording) Indicator . . . . . . . . . .30
Tab, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . .1
Tape Playback: HI-FI/LINEAR/MIX
XPR Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
— Z
—
Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Tape Speed Indicators . . . . . . . . . . . . . . . . . . .20,30
Tape, Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Time and Date, Set . . . . . . . . . . . . . . . . . . . . . . . . .9
Time Counter . . . . . . . . . . . . . . . . . . . . . . . . . .17,30
Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Time, Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
TIMER Indicator . . . . . . . . . . . . . . . . . . . . . . . .22,30
Timer Recording . . . . . . . . . . . . . . . . . . . . . . .22-23
TIMER RECORDINGS Menu . . . . . . . . . . . . .22,23
TRACKING Buttons . . . . . . . . . . .12-13,14,15,16,28
Tracking, Automatic and Manual . . . . . . . . . . . .16
Trouble Checks . . . . . . . . . . . . . . . . . . . . . . . . .32-33
Turn On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Turn on VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
TV Button . . . . . . . . . . . . . . . . . . . . . . . . . . .11,12,13
TV Codes, Compatible . . . . . . . . . . . . . . . . . . . .11
Zero Search Feature . . . . . . . . . . . . . . . . . . . . . . .19
ZERO SEARCH Menu . . . . . . . . . . . . . . . . . . . . .19
37
Download from Www.Somanuals.com. All Manuals Search And Download.
For your nearest Authorized Servicenter
call toll-free in the U.S.A.
1-800-336-1900
Canadian Consumers –
Your toll free numbers are:
English: 1-800-522-0338
French: 1-800-522-0445
If your VCR needs service, please contact your dealer
or the nearest Servicenter from the yellow pages.
Please do not send any products to the Indianapolis
address listed in this manual or on the carton. This
will only add delays in service for your product.
10330 North Meridian Street
Indianapolis, IN 46290-1024
©1996 Thomson Consumer Electronics, Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
Printed in Korea
Part Number 96-VR609HF-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|