OWNER’S MANUAL
22” TFT LCD DIGITAL TV WITH DVD PLAYER
L22HD34D
L22HD34DB
L22HD34DP
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
AIR/CABLE MODE SELECTION
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.
If not using Cable TV, set this menu option to the “Air” position.
Before operating the unit, please read this manual thoroughly.
52D0201A_EN.indd 1
6/12/09 1:44:18 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such
as vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric
shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any type of
liquid into the unit.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
19) If an outside antenna or cable system is
ANTENNA
LEAD IN WIRE
connected to the unit, be sure the antenna or
cable system is grounded to provide some
protection against voltage surges and built-up
static charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMPS
NEC-NATIONAL
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRICAL CODE
S2898A
grounding electrodes, and requirements for the grounding electrode.
20) When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21) Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.
22) Keep your fingers clear of the disc slot as it is closing. It may cause injury.
3
52D0201A_EN.indd 3
6/12/09 1:44:21 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (continued)
23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.
24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.
25) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker
overheating and fire.
26) When you use the headphones, keep the volume at a moderate level. If you use the headphones
continuously with high volume sound, it may cause hearing damage.
27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the
laser beam. It may cause eye damage.
28) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
29) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
30) The socket-outlet must be installed near the unit and easily accessible.
CONDENSATION
Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm
room or if the temperature of the room rises suddenly.When this happens, player's performance will be impaired.
To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure
that the room temperature rises gradually.
Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In
such cases, change the location of the player.
HOW TO HANDLE THE LCD PANEL
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause
skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger flat panel displays are popular
purchases. However, flat panel displays are not always supported on the proper stands or installed
according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of
your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” flat
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
professional installation.
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/
product and wall mount. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
4
52D0201A_EN.indd 4
6/12/09 1:44:21 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause
overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When
placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
10cm
10cm
Notes when mounting the LCD TV/DVD on a wall
If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/DVD for advice,
and have the equipment professionally installed. Incomplete or improper installation may cause injury to you,
and/or damage to the LCD TV/DVD.
To hang the television on a wall, remove these screws and then
remove a stand. Before performing work spread cushioning over
the base area to lay the TV on.
IMPORTANT NOTICE
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your
LCD Panel on for long periods of time while it is displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim
any responsibility for these symptoms.
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes
parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
• Do not install the LCD Panel near electronic equipment that is susceptible to electromagnetic waves. Some
equipment placed too near this unit may cause interference.
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless
headphones.
5
52D0201A_EN.indd 5
6/12/09 1:44:21 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
How to attach the stand
NOTE:
• Unplug the AC cord from the AC INPUT terminal.
• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid
any damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its back onto a table.
Align the stand’s bottom-plate (supplied) as seen here.
It will fit in only one direction.
Press it in direction of arrow until you hear a ‘click’.
Finally secure the bottom-plate with 2
screws (supplied).
Please assure the “ ” mark on the stand is facing the
LCD panel side.
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the
carton. To remove the stand, remove the two (2) screws from the bottom (see A), and hold the stand on a
flat surface lifting one side of the unit until stand disconnects (see B).
A
B
For wall mounting, the base must be removed. To disconnect the base/stand remove the two (2) screws from the
back (see page 5).
6
52D0201A_EN.indd 6
6/12/09 1:44:22 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
LCD color TV With DVD/CD player
Unique space saving design combines a 22” LCD color TV and a DVD/CD player.
A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a
DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality
is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language
selection, or multi-angle, etc.
The DVD PLAYER can play back both audio CDs and MP3/WMA/JPEG CDs.
Compatible with a wide range of DVD audio outputs
Digital Audio Jack (Coaxial)
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the
effect of being in a movie theater or a concert hall.
• Surround standard is different from Dolby Digital. This format is already in use in many theaters. By connecting
this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs
recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.
• By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs
recorded in this format can be enjoyed.
• The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.
Convenience Features
Direct selection of your desired scenes using Title/Chapter/Time/Track - You can play back from the
desired scene.
Recalling Up to 3 Scenes - You can program up to 3 scenes in memory and recall the marked scenes.
Frame Advance - The PAUSE/STILL moves one frame at a time.
Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/7-1/2 times.
Repeat Playback -You can repeat chapter, track, title, sides or material between two selected points.
Program Playback (Audio CD/MP3/WMA CD) - You can play back tracks in programmed sequences.
Zoom -You can zoom in the selected subject on the screen during playback.
Note: Make sure that discs are suitable for the following functions.
Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back
for movies or programs.
Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc,
you can change the angles during playback.
Parental Control - You can limit the play back of scenes or sounds of DVD discs that have a rating level
encoded on the disc.
Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.
TV Features
Integrated Digital Tuner -You can view digital broadcasts without using a Digital TV Set-Top Box.
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for
hearing impaired viewers.
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to 120
minutes to turn off automatically.
On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for on-
screen programming.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded
with this information. V-chip will allow you to set a restriction level.
*
is a trademark of DVD Format/Logo Licensing Corporation.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
*
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued &
pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks
of DTS, Inc.© 1996-2008 DTS, Inc. All Rights Reserved.
* HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
7
52D0201A_EN.indd 7
6/12/09 1:44:24 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Before using your unit
DVD operation
Preparation .....................................................26
Status display of disc ......................................26
Playback procedure........................................26
Special playback.............................................27
MP3/WMA/JPEG and Audio CD playback......27
Setting the JPEG interval................................29
Program playback (CD) ..................................29
Repeat playback (CD).....................................30
Random playback (CD) ..................................30
Zooming..........................................................30
Locating desired scene...................................30
Repeat playback.............................................30
Marking desired scenes..................................31
Changing soundtrack language ......................31
Subtitles..........................................................32
Changing angles.............................................32
IMPORTANT SAFETY INSTRUCTIONS...........3
SAFETY PRECAUTIONS .................................5
IMPORTANT NOTICE.......................................5
How to attach the stand ....................................6
How to remove the stand ..................................6
Features............................................................7
Contents ...........................................................8
Disc...................................................................9
Location of controls.........................................10
Remote control ...............................................11
Power source..................................................12
Antenna connections ......................................13
Cable TV connections.....................................14
TV operation
Starting setup .................................................15 Title selection..................................................32
Setting the on-screen language ......................15 DVD menu ......................................................32
Memorizing channels......................................15 Setting the language.......................................32
TV operation ...................................................17 Setting the aspect ratio of TV screen ..............33
Labeling channels...........................................18 Setting on screen display................................33
Labeling video inputs......................................18 Setting the picture mode.................................33
Setting the V-Chip ...........................................18 Night mode .....................................................34
Closed Caption...............................................20 Digital out........................................................34
CC advanced..................................................21 Parental control...............................................34
Adjusting the picture preference .....................21 Temporary disabling of rating level
Picture control adjustment ..............................21 by DVD disc ....................................................35
Selecting the color temperature ......................22
Additional information
Setting the picture size....................................22
Film mode.......................................................23
Picture control adjustment in the PC mode...........23
DNR................................................................23
Sound control adjustment...............................24
Selecting Stereo/
Language code list..........................................36
Connections to other equipment.....................37
Reception disturbances ..................................40
Problems and troubleshooting ........................41
Specifications ................................................43
Limited Warranty ............................................44
Second Audio Program (SAP) ........................24
Selecting the audio language..........................24
Selecting the HDMI audio input source...........25
Adjusting the back lighting ..............................25
Checking the digital-signal strength................25
Setting the auto shut off ..................................25
Resetting your settings ...................................26
8
52D0201A_EN.indd 8
6/12/09 1:44:24 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Playable discs
Disc type and logo mark
CAUTION:
content
• Only the left types of discs can be played on this
unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc.
cannot be played.
Audio
+
• 8cm discs can be played directly. If an 8cm disc
adapter is used it will cause errors.
DVD Video
Video
(moving
pictures)
• If you insert an irregular shaped disc, it may get
stuck and cause a malfunction.
• The use of a ring protector or other disc
accessories will cause errors.
CD-DA
Audio
• This unit is to be used exclusively with the NTSC
color system. PAL and SECAM system discs cannot
be used with this unit.
The following discs are also available.
• DVD-R/RW discs of DVD video format.
• CD-R/RW discs of MP3/WMA/JPEG.
• Some CD-R/RWs and DVD-R/RWs cannot be
played back depending on the recording conditions.
Region Number
Region number (Regional restriction code) is built-in to the unit and DVD video discs.
Region number “1” or “ALL” of DVD video discs can be used on this unit.
ALL
1
Title
DVD DISC
When two or more movies are recorded on a disc, the disc
is divided into two or more sections. Each section is called
a “TITLE”.
TITLE 1
CHAPTER 1
TITLE 2
CHAPTER 2
CHAPTER 2
CHAPTER 1
CHAPTER 3
Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Audio - CD
Track
An Audio CD can contain several items.
These are assigned to the tracks.
TRACK
1
TRACK
2
TRACK
3
TRACK
4
TRACK
5
Removing Disc from Case
Be sure to hold the edge of disc. Do not touch the surface of the disc.
Pick up the disc gently from the case.
• Do not scratch the disc.
• Do not get dirt on the surface of the disc.
• Do not stick a label or adhesive tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to avoid risk of scratches, dirt or damage.
• Do not leave disc exposed to direct sunlight or in hot or humid places.
Cleaning Disc
Wipe the disc with a clean, dry cloth from center to edge.
• Do not wipe the disc in a circular motion.
• Do not use liquid or aerosol cleaners.
9
52D0201A_EN.indd 9
6/12/09 1:44:24 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of controls
Left side
Front
DISC
EJECT button
slot
VOLUME +/– buttons
CHANNEL /1 (PLAY) button
CHANNEL /3 (STOP) button
MENU button
INPUT/ENTER button
POWER button
Remote sensor
POWER indicator
To display the menu screen.
Press MENU button to display the menu screen.
CHANNEL
/
buttons, VOLUME +/– buttons and INPUT/ENTER button can be used to select the desired
setting during the menu screen operations.
Rear side
RF (ANT.) IN jack
DIGITAL AUDIO COAXIAL OUT jack
AC INPUT jack
HEADPHONE IN jack
HDMI IN jack
COMPONENT IN jacks
(Y/Pb/Pr/AUDIO (L/R))
PC/HDMI AUDIO IN jack
VIDEO IN jacks (VIDEO/S-VIDEO/AUDIO (L/R))
PC MONITOR IN jack
10
52D0201A_EN.indd 10
6/12/09 1:44:25 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
POWER
Power On/Off
DISPLAY/–
Call TV information
Call DVD information
Input “–” for digital channels
TV/DVD
(EJECT)
0-9
Switch between TV and DVD
Eject a disc
Direct channel selection of TV
Input setting
Enter a password
VOL +/–
MUTE
SLEEP
Adjust volume of TV
Switch off the sound
Sleep timer
SETUP/
TV mode - Display menu of TV
TV MENU
DVD mode - Call up initial setup mode
DVD MENU
Display DVD menu
Select channel of TV
Cursor buttons
CH
▲▼◀▶
/
ENTER
Enter information in the menu
EXIT/
Exit from On-Screen menu
CANCEL
Reset information in the menu
TOP MENU
SEARCH
PLAY
Select title
Fast Forward/Review playback
Playback
SKIP
SUBTITLE
STOP
Skip chapter to forward or reverse direction
Set subtitle
Stop
SLOW
Forward/Reverse- slow motion
PAUSE/STILL
Pause CD sound
Still picture of DVD
PLAY MODE
AUDIO
RETURN
REPEAT A-B
ANGLE
Select playback mode
Change sound track language
Remove DVD setup menu
Repeat playback between A and B
Change playback angle
SCREEN SIZE Display PICTURE SIZE menu
MARKER
Index
CCD/
Closed Caption
JUMP
Locating desired scene
RECALL/
ZOOM
Switch between present/last channel
Zoom
INPUT SELECT Display source selection menu
ATTENTION
If you purchase a universal remote from a local retailer, please contact the remote manufacturer for the correct
programming code.
11
52D0201A_EN.indd 11
6/12/09 1:44:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
(continued)
Inserting Batteries
Open the battery compartment
cover in the direction of the arrow. 2
Install two “AAA” batteries,
paying attention to the
polarity diagram in the battery
compartment.
Replace the compartment cover.
1
3
Operation
• Aim the remote control at the remote sensor and press control
buttons to operate.
• Operate the remote control within a 30° angle on either side of
the remote sensor, up to a distance of approximately 15 feet.
Approximately 15 feet
NOTE:
• Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.
• The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote
sensor may shorten operating distance.
• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries
properly.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinic), or rechargeable, (ni-cad, ni-mh, etc) batteries.
• Remove batteries if the remote control will not be operated for an extended period of time.
Power source
TO USE AC POWER
1.Connect the AC cord plug into this unit’s AC IN jack.
2.Connect the AC cord into an AC outlet.
AC Outlet
Wider Hole
and Blade
AC 120V, 60Hz
AC cord (supplied)
NOTE:
• Please make sure to insert the cord securely at both the LCD TV/DVD and the wall outlet.
• The AC Cord has a polarized type AC line plug. If the supplied AC cord does not match your AC outlet,
contact a qualified electrician.
WARNING:
• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC
CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.
• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED. THIS COULD CAUSE
FIRE, ELECTRICAL SHOCK, OR DAMAGE.
CAUTION:
• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF
SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.
• DO NOT PLUG/UNPLUG THE AC CORD WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL
SHOCK.
• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS
RECOMMENDED. CONTACT THE DEALER THAT YOU PURCHASED THE UNIT FROM.
12
52D0201A_EN.indd 12
6/12/09 1:44:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Connect the 75 ohm cable from the combination
Antenna
Jack
Antenna
Jack
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
300-75 ohm
Matching
75 ohm
Coaxial
Cable
Transformer
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Connect the UHF 300 ohm twin-lead wire to
the Combiner (not supplied). Connect the VHF
Antenna
300 ohm twin-lead wire to the 300-75 ohm
Matching Transformer. Attach the Transformer to
the Combiner, then attach the Combiner to the
Antenna Jack.
Jack
Combiner
UHF 300 ohm
VHF 300 ohm
300-75 ohm Matching Transformer
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-leadwiretotheCombiner(notsupplied). Attach
the Combiner to the Antenna Jack.
Antenna
Jack
Combiner
UHF 300 ohm
VHF 75 ohm
IMPORTANT: Go to page 15 to choose the signal and search for channels.
13
52D0201A_EN.indd 13
6/12/09 1:44:28 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable TV connections
This TV has an extended tuning range and can tune most cable channels without using a Cable TV
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.
Descrambling these signals for normal viewing requires the use of a descrambler device which is
generally provided by the Cable TV company.
For subscribers to basic Cable TV service
For basic Cable TV service not requiring a Converter/
Descrambler box, connect the 75 ohm Coaxial Cable directly
to the Antenna Jack on the back of the TV.
Antenna
Jack
75 ohm
Coaxial Cable
For subscribers to scrambled Cable TV service
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect
the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel
3 or 4) and use the Converter/Descrambler box to select channels.
Incoming
75 ohm
Cable TV
Cable
Antenna
Jack
75 ohm Cable to TV
Converter/
Descrambler
For subscribers to unscrambled Cable TV service with scrambled premium
channels
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the
Converter/Descrambler box to tune scrambled channels.
Incoming
Converter/
75 ohm
Cable TV
Cable
Antenna
Jack
Descrambler
75 ohm Cable to TV
A
A/B Switch
Splitter
B
IMPORTANT: Go to page 15 to choose the signal and search for channels.
14
52D0201A_EN.indd 14
6/12/09 1:44:29 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu
Starting setup
>>
Picture
Audio
Channel
Lock
The Starting Setup menu appears the first time
you turn on the TV, and assists you to select the
menu language, specify the Air/Cable setting,
and program your channels automatically.
Setup
: Select
ENTER:Set
Press ▲ or ▼ to select “Setup”, then press ▶ or
4
5
IMPORTANT: Make sure that the antenna or cable
TV system connection is made!
ENTER.
Press ▲ or ▼ to select “Language”.
Setup
To turn on the TV, press POWER (POWER
1
indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to
appear on screen.).The starting setup function
begins. Press ◀ or ▶ to select your desired
language.
Closed Caption
>>
Language
English
>>
Video Label
Auto Shut Off
Reset
Off
>>
: Select
: Adjust
Auto Setup
Language
English
Cable
Start
Signal Type
Press ◀ or ▶ to select the desired language:
6
7
Automatic Search
English, French (Français) or Spanish (Español).
Press EXIT/CANCEL to return to the normal
screen.
: Select
: Adjust
Press ▲ or ▼ to select “Signal Type”, then press
2
3
4
NOTE:
◀ or ▶ to select “Cable” or “Air”.
• If no buttons are pressed for more than about 60
seconds, the menu screen will return to normal
operation automatically.
Press ▲ or ▼ to select “Automatic Search”, then
press ▶ or ENTER.
Now the “Auto Setup” starts. After the starting
setup is completed, the TV channel appears on
the screen.
Memorizing channels
This TV is equipped with a channel memory
feature which allows channels to skip up or down
to the next channel set into memory, skipping
over unwanted channels. Before selecting
channels, they must be programmed into the
TV’s memory. To use this TV with an antenna, set
the Signal Type option to the Air mode. When
shipped from the factory, this menu option is in
the Cable mode.
•
Depending on the reception condition, it may
take from 15 minutes to 30 minutes to complete
memorizing digital cable channels. Please be
patient.
NOTE:
• If you press EXIT/CANCEL in the process of “Auto
Setup”, the Starting Setup stops and changes to the
normal screen.
• When you make a menu selection, your changes
occur immediately.You do not have to press EXIT/
CANCEL to see your changes.
Air/Cable selection
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
1
• When you are finished programming the menus,
press EXIT/CANCEL.
Press ▲ or ▼ to select “Channel”, then press ▶
or ENTER.
2
Setting the on-screen
language
Press ▲ or ▼ to select “Auto Ch Memory”, then
3
press ▶ or ENTER.
You can choose from three different languages
(English, French and Spanish) for the on-screen
displays.
Press ▲ or ▼ to select “Signal Type”.
4
Press ◀ or ▶ to select “Air” or “Cable”.
5
Select the language you prefer first, then
proceed with the other menu options.
Air - VHF/UHF channels
Cable - CABLE TV channels
Press POWER.
1
Auto Ch Memory
Signal Type
Cable
Start
Automatic Search
Press TV/DVD to select TV mode.
2
Press SETUP/TV MENU. The TV menu screen
will appear.
3
: Select
: Adjust
Press EXIT/CANCEL to return to the normal
screen.
6
15
52D0201A_EN.indd 15
6/12/09 1:44:29 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE CHART
Press ▲ or ▼ to select “Add/Delete”, then press ▶
4
The chart below is typical of many cable system
channel allocations.
or ENTER.
Add/Delete
Adding Channel
Add/Delete
Clear All
>>
>>
>>
: Select
ENTER:Set
Press ▲ or ▼ to select “Adding Channel”, then
press ▶ or ENTER. The new channel will be
added into the channel memory.
5
6
NOTE:
Press EXIT/CANCEL to return to the normal
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
screen.
Add/Delete channel
Automatic search
You can select the channel that you want to skip.
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
1
Press SETUP/TV MENU in the TV mode. The TV
1
2
3
4
menu screen will appear.
Press ▲ or ▼ to select “Channel”, then press ▶ or
2
Press ▲ or ▼ to select “Channel”, then press ▶ or
ENTER.
ENTER.
Press ▲ or ▼ to select “Auto Ch Memory”, then
Press ▲ or ▼ to select “Add/Delete”, then press
3
press ▶ or ENTER.
▶ or ENTER.
Press ▲ or ▼ to select “Add/Delete”, then press
Press ▲ or ▼ to select “Automatic Search”, then
4
▶ or ENTER.
press ▶ or ENTER.
Auto Ch Memory
Press ▲ or ▼ to select the channel that you want
5
Signal Type
Cable
Stop
to skip.
Automatic Search
Add/Delete
Analog Channel Found : 7
Digital Channel Found : 5
CH
Signal
Analog
Analog
Digital
Digital
Analog
2
3
Add
Add
Programming Now
3-001
3-002
4
Delete
Add
: Select
ENTER:Cancel
Delete
The TV will begin memorizing all the channels
available in your area.
5
: Select
: Adjust
Press ◀ or ▶ to select “Add” or “Delete”,
• It may take from 15 minutes to 30 minutes to
complete memorizing digital cable channels.
Depending on the reception condition, a bar
display may not advance for several minutes,
please be patient.
6
7
8
whichever function you want to perform.
Repeat steps 5 - 6 for other channels you want to
add or delete.
Press EXIT/CANCEL to return to the normal
NOTE:
screen.
• Memorizing channels is best accomplished during
evening “PRIMETIME” hours, as more stations are
broadcasting digital signals. Memorizing channels
can only be accomplished while a station is
broadcasting a digital signal to set that channel into
memory.
Clear All
All channels are deleted from the channel memory.
Press SETUP/TV MENU in the TV mode. The TV
1
2
3
4
menu screen will appear.
Press ▲ or ▼ to select “Channel”, then press ▶ or
• If you are unsure of the digital channels available
receive a list based on your address or zip code.
• New digital channels may be added to your area
periodically, it is recommended to perform the
“Automatic Search” procedure regularly.
ENTER.
Press ▲ or ▼ to select “Add/Delete”, then press ▶
or ENTER.
Press ▲ or ▼ to select “Clear All”, then press ▶ or
ENTER.
Add/Delete
Adding Channel
Adding Channel
Add/Delete
Clear All
>>
>>
>>
If you find a new digital channel unregistered, you can
add the new channel into the channel memory.
Tune in the new channel.
1
: Select
ENTER:Set
Press SETUP/TV MENU in the TV mode. The TV
2
menu screen will appear.
Press EXIT/CANCEL to return to the normal
5
screen.
Press ▲ or ▼ to select “Channel”, then press ▶ or
3
ENTER.
16
52D0201A_EN.indd 16
6/12/09 1:44:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the video input source
TV operation
To view a signal from another device connected to
your LCD TV, such as a VCR player, press INPUT
SELECT, then press ▲/▼ or corresponding Number
buttons (0-5), then press ENTER.You can select TV,
Video, Component, HDMI, PC or DVD depending on
which input jacks you used to connect your devices.
Source Selection
To turn on the TV, press POWER.
1
(POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.)
Adjust the volume level by pressing VOL + or – .
2
0.TV
1.Video
2.Component
3.HDMI
4.PC
The volume level will be indicated on the screen
by blue bars. As the volume level increases, so do
the number of bars. If the volume decreases, the
number of blue bars also decreases.
5.DVD
[0-5]:Select
Set the Signal Type option to the appropriate
3
4
position (see “Air/Cable selection” on page 15).
CH
/
Press the Direct Channel Selection (0-9, –)
Press and release CH
/
. The channel automatically
buttons to select the channel.
stops at the next channel set into memory.
For proper operation, before selecting channels, they
should be set into the memory. See “Memorizing
channels” on pages 15 and 16.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS
1-9:
Press 1-9 as needed. Example, to
select channel 2, press 2, then press
ENTER.
DISPLAY
Press DISPLAY to display the current information on
10-99:
Press the 2 digits in order. Example,
to select channel 12, press 1, 2, then
press ENTER.
the screen.
When the TV receives a digital signal, the digital
information will appear.
100-135: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0, then
press ENTER.
Sleep Timer
62-001 HDTV Moving Picture1
Off
CH-1
Digital Air
English
No Program Information is available
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the – button,
followed by the remaining number.
Full
1080i
Example, to select channel 015-001, press 0, 1,
5, –, 0, 0, 1, then press ENTER.
• If a channel is selected with only audio content,
“Audio only” will be displayed on the screen.
• If a channel is selected with a weak digital
signal, “Digital channel signal strength is low”
will be displayed on the screen.
• Channel number
• Channel label (if preset) • Broadcast program name
• V-Chip rating
• Sleep timer
• Program guide
• Resolution
• Station name
• Signal type
• Audio language
• Picture size
The same program may be available on either
an analog channel or a digital channel.You may
choose to watch either format.
When the TV receives a analog signal, the analog
information will appear.
• If a channel is selected to which you have not
subscribed, “Digital channel is encrypted” will
be displayed on the screen.
Sleep Timer
14
Off
Analog Cable
VHF/UHF/CABLE CHANNELS
Air
Cable
Mono
Full
VHF
VHF
480i
2-13
2-13
UHF
STD/HRC/IRC
• Channel number
• V-Chip rating
• Channel label (if preset)
• Signal type
14-69
14-36
(A) (W)
37-59
60-85
86-94
95-99
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
• Sleep timer
• Picture size
• Audio information
(Stereo, SAP or Mono)
• Resolution
(A-5) (A-1)
100-135 (100) (135)
Press DISPLAY again to clear the call display.
01
(4A)
NOTE:
NOTE:
• After a few seconds, DISPLAY screen will return to
normal TV-operation automatically.
• If a channel with no broadcast is selected, the
sound will automatically be muted.
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
RECALL
This button allows you to go back to the last channel
selected by pressing RECALL. Press RECALL again
to return to the last channel you were watching.
17
52D0201A_EN.indd 17
6/12/09 1:44:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MUTE
If the character which you desire appears, press
ENTER.
Press MUTE to switch off the sound. The TV’s sound
will be silenced and “Mute” will appear on the screen.
The sound can be switched back on by pressing this
button again or the VOL + or –.
Repeat this step to enter the rest of the
characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count up 10 minutes for each press of the SLEEP but-
ton (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep
timer is programmed, the display will appear briefly
every ten minutes to remind you that the sleep timer
is operating. To confirm the sleep timer setting, press
SLEEP and the remaining time will be displayed for a
few seconds. To cancel the sleep timer, press SLEEP
repeatedly until the display turns to Off.
When you finish inputting the label name, press
6
7
EXIT/CANCEL to return to the normal screen.
Repeat steps 4-5 for other channel.You can
assign a label to each channel.
To clear a Ch Label
After step 4 above, press ▲ or ▼ to select “Label
Clear”, then press ▶ or ENTER.
NOTE:
• The channel labels will be reset after “Automatic
Search” on page 16.
Sleep Timer
0h 10m
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
Press SETUP/TV MENU in the TV mode. The TV
1
2
3
4
Labeling channels
menu screen will appear.
Press ▲ or ▼ to select “Setup”, then press ▶ or
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
ENTER.
Press ▲ or ▼ to select “Video Label”, then press
You can choose any four characters to identify a
channel.
▶ or ENTER.
Press ▲ or ▼ to select an input which you want to
label.
To create channel labels
Press ◀ or ▶ to select the desired label for that
5
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
1
input source.
Video Label
Video
-
-
-
Press ▲ or ▼ to select “Channel”, then press ▶ or
2
Component
HDMI
ENTER.
Press ▲ or ▼ to select “Ch Label”, then press ▶
3
: Select
: Adjust
or ENTER.
The “Ch Label” menu will appear.
–
: Uses the default label name
:Video cassette recorder
: DVD video
VCR
DVD
DTV
SAT
CBL
HD
Press ◀ or ▶ to select a channel you want to
4
label, then press ▼.
: Digital TV set-top box
: Satellite box
Ch Label
Channel Number
15-1
>>
: Cable box
Ch Label
Label Clear
: HDMI device (only for HDMI inputs)
Press EXIT/CANCEL to return to the normal
6
screen.
: Select
: Adjust
Press ◀ or ▶ repeatedly until the character you
5
Setting the V-Chip
want appears in the first space.
Ch Label
An age limitation can be set to restrict children
from viewing or hearing violent scenes or
pictures that you may choose to exclude. The
restriction applies to “TV Rating” and “Movie
Rating” if this data is transmitted. You may set
this restriction separately. To use the V-Chip
function, you must register a password.
Channel Number
15-1
A
Ch Label
Label Clear
>>
: Select
: Adjust ENTER:Set
The characters rotation as follows:
, () @ / + =
-
-
SPACE
18
52D0201A_EN.indd 18
6/12/09 1:44:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
To register a password
Genre:
ALL
D
: All
Press SETUP/TV MENU in the TV mode. The TV
1
: Dialogue
: Language
: Sex
menu screen will appear.
L
S
Press ▲ or ▼ to select “Lock”, then press ▶ or
2
V
:Violence
: Fantasy Violence
Movie Rating
ENTER.
FV
Select and enter your password (4 digits) using
3
Number buttons (0-9), then press ENTER.
Movie Rating
Lock
G
PG
PG-13
R
_
New Password
* * *
NC-17
X
: Select
ENTER:Set
[0-9] : Select
ENTER:Set
G
: All ages
“
” appears instead of the number.
PG
: Parental guidance
PG-13 : Parental guidance less than 13 years old
Enter the same password again to confirm, then
press ENTER.
4
R
: Under 17 years old parental guidance
suggested
The password is now registered.
NC-17 : 17 years old and above
X
: Adult only
NOTE:
• If you forget your password, you can reset it. Turn
the volume all the way down using VOLUME – on
the TV. Continue holding the button and press 0
on the remote control at the same time for about 5
seconds. Enter a new password.
Press ▲/▼/◀/▶ to select the desired rating, then
7
8
press ENTER.
Press EXIT/CANCEL to return to the normal screen.
V-Chip function is activated now.
• To avoid forgetting the password, write it down and
keep in a safe place.
To use the TV after the TV is protected.
When a program is received that is blocked by the
V-Chip, press MUTE, then enter your password.
The protection will be temporarily overridden. If the
TV is turned off or the channel is changed, the V-Chip
restriction will be reactivated.
To set the V-Chip
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
Press ▲ or ▼ to select “Lock” menu, then press
2
3
NOTE:
▶ or ENTER.
• The V-Chip function is activated only on programs
and input sources that include a rating signal.
Use Number buttons (0-9) to enter your
password, then press ENTER. Then Lock menu
To change the password
will appear.
Press SETUP/TV MENU in the TV mode. The TV
1
Press ▲ or ▼ to select “V-Chip”, then press
4
5
menu screen will appear.
◀ or ▶ to select “On” .
Press ▲ or ▼ to select “Lock”, then press ▶ or
2
Press ▲ or ▼ to select “V-Chip Set”, then press
ENTER.
▶ or ENTER.
Use Number buttons (0-9) to enter your
3
The V-Chip Set Menu appears.
password, then press ENTER. The Lock menu
will appear.
Press ▲ or ▼ to select which rating will be used,
6
then press ▶ or ENTER. Each rating below will
Press ▲ or ▼ to select “Change Password”, then
4
appear.
press ▶ or ENTER.
TV Rating
The Change Password screen will appear.
TV Rating
ALL
D
L
S
V
FV
Enter a new password using Number buttons
5
6
TV-Y
TV-Y7
TV-G
(0-9), then press ENTER.
TV-PG
TV-14
TV-MA
Enter the same password again to confirm, then
press ENTER.
: Select
ENTER:Set
The password is now registered.
You can set the rating using age level and genre.
Downloading the additional V-Chip rating system
As a supplement to the standard V-Chip rating
system, your television will be able to download an
additional rating system, if such a system becomes
available in the future.
Age:
TV-Y
: All children
TV-Y7 : 7 years old and above
TV-G
: General audience
TV-PG : Parental guidance
TV-14 : 14 years old and above
TV-MA : 17 years old and above
19
52D0201A_EN.indd 19
6/12/09 1:44:32 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
To download the additional V-Chip rating system
(when available)
Closed Caption
WHAT IS CLOSED CAPTIONING?
Press SETUP/TV MENU while on a digital
1
2
3
This television has the capability to decode and
display Closed Captioned television programs. Closed
Captioning will display text on the screen for hearing
impaired viewers or it will translate and display text in
another language.
channel.
Press ▲ or ▼ to select “Lock”, then press ▶ or
ENTER.
Use Number buttons (0-9) to enter your password,
then press ENTER.The Lock menu will appear.
Captions: This Closed Caption Mode will display
text on the screen in English or another language.
Generally, Closed Captions in English are transmitted
on C1 and Closed Captions in other languages are
transmitted on C2.
Press ▲ or ▼ to select “V-Chip Set (DTV)”, then
4
press ▶ or ENTER.
If the TV is not storing the additional rating
5
system, the TV will begin downloading it, which
may take some time to be completed.
Text: The Text Closed Caption Mode will usually fill
1/2 of the screen with a programming schedule or
other information.
Set your preferred content rating limits for the
6
additional rating system.
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
You also need “Update” procedure to update
7
rating information.
Press ▲ or ▼ to select “Setup”, then press ▶ or
2
ENTER.
NOTE:
• You can only download the additional V-Chip rating
system when your TV is receiving a digital signal.
• When you download the additional rating system, it
may take some time for the download to occur.
• The V-Chip rating information and system are not
determined or controlled by the TV.
Press ▲ or ▼ to select “Closed Caption”, then
3
press ▶ or ENTER.
The Closed Caption menu will appear.
Press ◀ or ▶ to set “CC Setting” to “On”.
4
On: Captions will be displayed on the screen.
Off: Captions will not be displayed on the screen.
• The standard V-Chip rating system is available
whether your TV is receiving a digital signal or not,
and will block both analog and digital programs. To
set the restriction level using the standard V-Chip
rating system, select V-Chip Set in step 4.
• The downloadable V-Chip rating system is an
evolving technology, and availability, content, and
format may vary.
Press ▲ or ▼ to select “Analog Caption” or “Digital
5
Caption”.
When you select “Analog Caption”, you can
choose C1, C2, C3, C4, T1, T2, T3 and T4.
When you select “Digital Caption”, you can
choose from CS1, CS2, CS3, CS4, CS5 and CS6.
• You cannot select this feature if the TV is not
receiving a digital signal for the current station.
Press ◀ or ▶ to select the desired Closed
6
Caption mode for both Digital and Analog
Caption.
To clear the all V-Chip settings
Press SETUP/TV MENU in the TV mode. The TV
1
2
3
Press ▲ or ▼ to select “CC Priority”, then press
7
menu screen will appear.
◀ or ▶ to select “Digital CC” or “Analog CC”.
Press ▲ or ▼ to select “Lock”, then press ▶ or
NOTE:
ENTER.
• Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal. This step prevents two types
of captions from overlapping.
Use Number buttons (0-9) to enter your
password, then press ENTER. The Lock menu
will appear.
Then press ◀ or ▶ to select “On”.
Press EXIT/CANCEL to return to the normal
8
screen.
Press ▲ or ▼ to select “V-Chip Clear”, then press
4
▶ or ENTER.
NOTE:
The Password screen will appear.
• If the program or video you selected is not closed-
captioned, no captions will display on-screen.
• If text is not available in your viewing area, a black
rectangle may appear on-screen. If this happens,
set the CC Setting to “Off”.
Use Number buttons (0-9) to enter your
5
password, then press ENTER. All your settings
return to the factory settings.
• When selecting Closed Captions, the captioning will
be delayed approx. 10 seconds.
•
If no caption signal is received, no captions will appear,
but the television will remain in the Caption Mode.
• Misspellings or unusual characters may
occasionally appear during Closed Captioning.
20
52D0201A_EN.indd 20
6/12/09 1:44:32 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
This is normal with Closed Captioning, especially
with live programs. This is because during live
programs, captions are also entered live. These
transmissions do not allow time for editing.
Press EXIT/CANCEL to return to the normal
7
screen.
NOTE:
• When Captions are being displayed, on-screen
displays, such as volume and mute may be seen
but may interfere with Closed Captions.
• You cannot set both “Text Color” and “Background
Color” as a same color.
• You cannot set both “Text Opacity” and “Background
Opacity” to “Transparent”.
• Some cable systems and copy protection systems
may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is
very poor, the Closed Caption Decoder may not
appear or may appear with strange characters or
misspelled words. In this case, adjust the antenna
for better reception or use an outdoor antenna.
Adjusting the picture
preference
You can select four picture modes—Sports,
Standard, Movie and Memory—as described in
the following table:
CC advanced
When you have selected Custom as the display
method, you can adjust the various setting listed
below as follows:
Press SETUP/TV MENU in the TV mode. The TV
1
2
menu screen will appear.
Press ▲ or ▼ to select “Picture”, then press ▶ or
This feature is designed to customize Digital Captions
only.
ENTER.
Press ▲ or ▼ to select “Picture Preference”.
3
Press SETUP/TV MENU in the digital channel.
1
2
3
Press ◀ or ▶ to select a mode you want to adjust.
Picture
4
The TV menu screen will appear.
Press ▲ or ▼ to select “Setup”, then press ▶ or
Picture Setting
Picture Preference
Picture Size
Film Mode
>>
Sports
>>
ENTER.
On
Press ▲ or ▼ to select “Closed Caption”, then
PC Setting
>>
DNR
On
press ▶ or ENTER.
: Select
: Adjust
The Closed Caption menu will appear.
Press ▲ or ▼ to select “Digital CC Preset”, then
Mode
Picture Quality
4
5
press ◀ or ▶ to select “Custom”.
Sports
Bright and dynamic picture (factory-set)
Press ▲ or ▼ to select “CC Advanced”, then
Standard Standard picture quality (factory-set)
Movie
Memory Your personal preferences (set by
you; see “Picture control adjustment”
below).
press ▶ or ENTER.
Movie-like picture setting (factory-set)
The CC Advanced menu will appear.
Press ▲ or ▼ to select the desired item, then
6
press ◀ or ▶ to change the setting.
CC Advanced
After your desired setting, press EXIT/CANCEL
Text Size
Auto
Auto
Auto
Auto
Auto
Auto
Auto
5
Text Type
to return to the normal screen.
Text Edge
Text Color
Text Opacity
Background Color
Background Opacity
: Adjust
Picture control adjustment
: Select
You can select from among the following items
and parameters.
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
Text Size:
Text Type:
Auto, Small, Standard, Large
Press ▲ or ▼ to select “Picture”, then press ▶ or
Auto, Style1, Style2, Style3, Style4,
2
ENTER.
Style5, Style6, Style7
Text Edge: Auto, None, Raised, Depressed,
Uniform, Left Shadow, Right
Shadow
Press ▲ or ▼ to select “Picture Setting”, then
3
press ▶ or ENTER.
The Picture Setting menu will appear.
Text Color: Auto, Black, White, Red, Green,
Press ▲ or ▼ to select the item you want to
4
Blue, Yellow, Magenta, Cyan
adjust.
Text Opacity: Auto, Solid, Transparent,
Press ◀ or ▶ to adjust the setting.
Translucent, Flashing
Picture Setting
Background Auto, Black, White, Red, Green,
Brightness
Contrast
Sharpness
Color
25
50
25
25
0
Color:
Blue, Yellow, Magenta, Cyan
Background Auto, Solid, Transparent,
Tint
Opacity:
Translucent, Flashing
Color Temperature
Cool
Backlight
16
: Select
: Adjust ENTER:Set
21
52D0201A_EN.indd 21
6/12/09 1:44:33 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the picture size
Brightness:25
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
After adjusting, press ENTER to return to the
Picture Setting menu. Then continue to adjust the
other items.
5
6
Press ▲ or ▼ to select “Picture”, then press ▶ or
2
ENTER.
Press ▲ or ▼ to select “Picture Size”, then press
3
◀
▶
▶ or ENTER to display Picture Size menu. Press
▲/▼ or corresponding Number buttons (0-4) to
select the desired picture size, as described below.
Picture Size
Brightness decrease
increase
brightness
brightness
Contrast decrease
increase
0.Natural
contrast
contrast
1.Cinema Wide1
2.Cinema Wide2
3.Cinema Wide3
4.Full
Sharpness makes picture
makes picture
clearer
softer
Color
Tint
be pale color
be brilliant color
[0-4]:Select
be reddish color be greenish
color
NOTE:
• Selectable picture sizes may vary depending on the
input source or broadcast signal.
• Picture Size menu also can be displayed by
After your desired setting, press EXIT/CANCEL
to return to the normal screen.
4pressing SCREEN SIZE on the remote control.
NOTE:
• The Contrast default setting is set to maximum at
the factory.
Press EXIT/CANCEL to return to the normal
screen.
Natural
Selecting the color
temperature
In some cases, this image will display the size of
standard 4:3 with a black side bar.
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
Press ▲ or ▼ to select “Picture”, then press ▶ or
2
ENTER.
Cinema Wide1 (for 4:3 format programs)
To fill the screen, the right and left edges are
extended,
Press ▲ or ▼ to select “Picture Setting”, then
3
press ▶ or ENTER.
however; the center of the picture remains near its
former ratio.
The Picture Setting menu will appear.
Press ▲ or ▼ to select “Color Temperature”, then
4
The top and bottom edges of the picture may be
hidden.
press ◀ or ▶ to change the setting.
Picture Setting
Brightness
Contrast
Sharpness
Color
25
50
25
25
0
Tint
Color Temperature
Cool
Backlight
16
: Adjust
: Select
Setting
Picture Quality
Bluish
Cinema Wide2 (for letter box programs with
subtitles)
Cool
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at the
top and the bottom.
Standard Neutral
Warm
Reddish
Press EXIT/CANCEL to return to the normal
5
The top and bottom edges of the picture may be hidden.
screen.
Setting the picture size
You can view 480i and 480p format programs in a
variety of picture sizes— Natural, Cinema Wide1,
Cinema Wide2, Cinema Wide 3, Full and Native.
22
52D0201A_EN.indd 22
6/12/09 1:44:33 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Cinema Wide3 (for letter box programs with
subtitles)
Press SETUP/TV MENU. The TV menu screen
2
3
4
will appear.
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at the
top and the bottom.
Press ▲ or ▼ to select “Picture”, then press ▶ or
ENTER.
The top and bottom edges of the picture may be hidden.
Press ▲ or ▼ to select “PC Setting”, then press ▶
or ENTER.
The PC Setting menu will appear.
PC Setting
A B C D E F G - - - - - - - - - - - - - - - -
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
Hor Position
Ver Position
Clock
25
25
0
Full (for 16:9 source programs)
Full will display the picture at the maximum size.
Phase
25
Auto Adjust
>>
: Select
: Adjust ENTER:Set
Press ▲ or ▼ to select the desired item you want
5
6
to adjust.
Native (for PC mode only)
Press ◀ or ▶ to adjust the setting.
Detects the resolution of the signal of the image and it
will be shown on the screen with same amount of pixels.
Hor
To adjust the horizontal position of
Position:
the image on the PC mode.
Ver
To adjust the vertical position of the
image on the PC mode.
To minimize any vertical bars
or stripes visible on the screen
background.
This must be adjusted after the
frequency of the PC mode has
been set to 60Hz to optimize
picture quality (page 39).
Position:
Clock:
NOTE:
• Some High Definition and/or Digital broadcasts may
not allow you to change the picture size.
• In HDMI or COMPONENT mode with a scanning
rate of 720p, 1080i or 1080p only the Cinema
Wide2 and Full picture size feature is available.
• In PC Mode, only the Natural, Full and Native
picture size features are available. In PC Mode
(WXGA), only the Full and Native picture size
features are available.
Phase:
Auto Adjust:To adjust the all PC settings
automatically
After adjusting, press ENTER to return to the PC
7
8
Setting menu. Then continue to adjust the other items.
Film mode
Press EXIT/CANCEL to return to the normal screen.
A smoother motion may be obtained by setting
the Film Mode to “On” when you view a DVD.
NOTE:
• Auto Adjust feature is available only for 16:9 or 4:3
format.
Press SETUP/TV MENU in the TV mode. The TV
1
2
3
• If no buttons are pressed for more than approx. 60
seconds, the Menu-screen will return to normal
Monitor-screen automatically.
menu screen will appear.
Press ▲ or ▼ to select “Picture”, then press ▶ or
ENTER.
•
The PC settings are not effective for other input modes.
Press ▲ or ▼ to select “Film Mode”.
Press ◀ or ▶ to select “On” or “Off”.
DNR
Picture
Picture Setting
Picture Preference
Picture Size
Film Mode
>>
Sports
>>
DNR (Digital Noise Reduction) can reduce the
roughness of the picture.
On
PC Setting
>>
DNR
On
Press SETUP/TV MENU in the TV mode. The TV
1
: Select
: Adjust
menu screen will appear.
Press ▲ or ▼ to select “Picture”, then press ▶ or
Press EXIT/CANCEL to return to the normal screen.
2
4
ENTER.
Press ▲ or ▼ to select “DNR”. Press ◀ or ▶ to
3
select “On” or “Off”.
Picture control
Picture
Picture Setting
Picture Preference
Picture Size
Film Mode
>>
adjustment in the PC mode
Sports
>>
On
PC Setting
>>
You can adjust to optimize the performance of
the TV in the PC mode.
DNR
On
: Select
: Adjust
Press INPUT SELECT, then press ▲/▼ or
1
Press EXIT/CANCEL to return to the normal screen.
4
Number button (4) to select the PC mode.
23
52D0201A_EN.indd 23
6/12/09 1:44:34 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Press EXIT/CANCEL to return to the normal
Sound control
adjustment
4
screen.
NOTE:
• Generally you can leave your TV in stereo
mode because the TV automatically outputs
the type of sound being broadcast (stereo or
mono).
Press SETUP/TV MENU in the TV mode. The TV
1
2
3
menu screen will appear.
Press ▲ or ▼ to select “Audio” , then press ▶ or
• If the stereo sound is noisy, select “Mono” to
reduce the noise.
ENTER.
Press ▲ or ▼ to select the item you want to
To listen to a second audio program (SAP)
Press ◀ or ▶ to select “SAP” in step 3 above. The
TV speakers will output the second audio program
instead of normal audio.
adjust.
Audio
Bass
15
15
0
Treble
Balance
MTS
Stereo
Off
Surround
Audio Language
HDMI Audio
Selecting the audio
language
No Info.
HDMI
: Select
: Adjust
Bass:
Press ◀ or ▶ to adjust the bass sound.
When two or more audio languages are included
in a digital signal, you can select one of the audio
languages. (This function is available only for
digital broadcast.)
Treble: Press ◀ or ▶ to adjust the treble sound.
Balance: Press ◀ or ▶ to obtain an equal sound
level from both speakers.
Surround:
Press SETUP/TV MENU in the digital channel.
1
2
3
Press ◀ or ▶ to select “On” or “Off”.
On: The dynamic presence and sound
created offers a thoroughly enjoyable
listening experience.
The TV menu screen will appear.
Press ▲ or ▼ to select “Audio” , then press ▶ or
ENTER.
Off: Normal sound.
Press ▲ or ▼ to select “Audio Language”, then
After you desired setting, press EXIT/CANCEL to
4
press ▶ or ENTER to display the Audio Language
return to the normal screen.
menu.
Press ▲/▼ or Number buttons (0-6) to select
4
your desired language.
Selecting Stereo/Second
Audio Program (SAP)
Audio Language
0. English
1. Language 1
2. Language 2
3. French
The multi-channel TV sound (MTS) feature
provides high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language or other audio
information.
4. Language 3
5. Spanish
6. No Info.
[0-6]: Select
Press EXIT/CANCEL to return to the normal
5
When the TV receives a stereo or SAP broadcast,
the word “Stereo” or “SAP” displays on-screen
every time you press DISPLAY.
screen.
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
Press ▲ or ▼ to select “Audio”, then press ▶ or
2
ENTER.
Press ▲ or ▼ to select “MTS”, then press ◀ or ▶
3
to select “Stereo”.
Audio
Bass
15
15
0
Treble
Balance
MTS
Stereo
Off
Surround
Audio Language
HDMI Audio
No Info.
HDMI
: Select
: Adjust
24
52D0201A_EN.indd 24
6/12/09 1:44:34 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the HDMI
audio input source
Checking the digital-
signal strength
This TV will allow you to view the digital signal
meter for digital channels.
When you use PC/HDMI AUDIO IN jack with HDMI
or DVI device, you must select HDMI audio input
source from “HDMI” or “DVI”.
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
Press ▲ or ▼ to select “Channel”, then press ▶ or
2
ENTER.
Press ▲ or ▼ to select “Audio”, then press ▶ or
2
ENTER.
Press ▲ or ▼ to select “DTV Signal”.
3
Press ▲ or ▼ to select “HDMI Audio”.
3
Press ENTER to check the Digital-signal strength.
4
Press ◀ or ▶ to select “HDMI” or “DVI”.
Audio
DTV Signal
Bass
15
15
0
Treble
Balance
MTS
Stereo
Off
Surround
Audio Language
HDMI Audio
50
100
Signal Level 0
No Info.
HDMI
: Select
: Adjust
HDMI: When you connect the HDMI device to
Press EXIT/CANCEL to return to the normal
5
the TV, select this setting.
screen.
DVI:
When you connect the DVI device to the
TV with analog audio cords, select this
setting.
NOTE:
• Signal meter feature is not available for analog
channels.
• After 240 seconds, Signal Meter screen will return
to normal TV-operation automatically.
Press EXIT/CANCEL to return to the normal
4
screen.
Setting the auto shut off
Adjusting the back lighting
If the Auto Shut Off feature is On, a station being
viewed stops broadcasting and the TV is not
operated, the TV will automatically shut itself off
after 15 minutes.
The Backlight feature adjusts the screen
brightness for improved picture clarity.
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
Press SETUP/TV MENU in the TV mode. The TV
1
menu screen will appear.
Press ▲ or ▼ to select “Picture”, then press ▶ or
2
ENTER.
Press ▲ or ▼ to select “Setup”, then press ▶ or
2
ENTER.
Press ▲ or ▼ to select “Picture Setting”, then press
3
▶ or ENTER.The Picture Setting menu will appear.
Press ▲ or ▼ to select “Auto Shut Off”.
3
Press ◀ or ▶ to select “On” or “Off”.
Press ▲ or ▼ to select “Backlight”.
4
Setup
Picture Setting
Closed Caption
>>
Language
English
>>
Brightness
Contrast
Sharpness
Color
25
50
25
25
0
Video Label
Auto Shut Off
Reset
Off
>>
Tint
Color Temperature
Cool
Backlight
16
: Adjust
: Select
: Adjust
: Select
Press EXIT/CANCEL to return to the normal
4
Press ◀ or ▶ to adjust the setting.
5
6
screen.
Press EXIT/CANCEL to return to the normal screen.
25
52D0201A_EN.indd 25
6/12/09 1:44:35 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting your settings Preparation
The Reset function returns your settings to the
factory settings.
The following pages describe the setup/
operation in DVD mode.
Preparation
Press SETUP/TV MENU in the TV mode. The TV
1
2
3
Before DVD/CD operation, please make the following
preparations.
menu screen will appear.
Press ▲ or ▼ to select “Setup” , then press ▶ or
ENTER.
Insert the AC cord plug into a standard 120V
1
60Hz polarized AC outlet.
Press ▲ or ▼ to select “Reset”.
Setup
• If the AC cord plug is plugged in for the first
time, wait for about 5 seconds before pressing
POWER.
Closed Caption
>>
Language
English
>>
Video Label
Auto Shut Off
Reset
Off
NOTE:
>>
• When connecting to other equipment, unplug
the unit from the AC outlet.
: Select
ENTER:Set
Press POWER on the unit or on the remote
2
Press ▶ or ENTER to return your settings to the
control to turn on the unit. The POWER indicator
will change to green.
4
5
factory settings.
• Each time you turn the unit ON, the TV/DVD
starts from the TV mode.
“Reset” will appear on the screen approx. 3
seconds, then it returns to the normal screen.
• When using an amplifier, switch on the amplifier.
Audio
Picture
Press TV/DVD to select DVD mode.
3
Bass
15
15
0
Picture Setting
Picture Preference
Picture Size
Film Mode
>>
The DVD startup screen will appear on the screen.
Treble
Sports
>>
Balance
MTS
Stereo
Off
On
PC Setting
>>
Surround
Audio Language
HDMI Audio
DNR
On
No Info.
HDMI
: Select
ENTER:Set
: Select
: Adjust
NOTE:
• “Picture Size” in Picture menu cannot be reset by
this function.
NOTE:
• “MTS”, “Audio Language” and “HDMI Audio” in
Audio menu cannot be reset by this function.
• If the unit does not operate properly:
Static electricity, etc., may affect the player’s
operation. Disconnect the AC power cord once,
then connect it again.
Status display of disc
Press DISPLAY. The status display of the disc will
appear on the screen.
ELAPSED
TIME
TOTAL
TIME
DISC OPERATION
TITLE NO.
DVD
Title 1/3
00:15:25 01:41:39
Chapter 2/24
1/2 Eng
CHAPTER
NO.
1/1 Eng Dolby Digital
1/1
ANGLE NO.
AUDIO LANGUAGE A KIND OF AUDIO
SUBTITLE LANGUAGE
To make the status display screen disappear, press
DISPLAY again.
Playback procedure
Press TV/DVD to select DVD mode.
1
Place the disc in the
2
disc slot with the label
side facing forward. (If
the disc has a label.)
Hold the disc without
touching either of its
surfaces, align it with
the guides, and place it
in position.
26
52D0201A_EN.indd 26
6/12/09 1:44:35 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Playback
On the screen, “ ” changes to “Reading” and
then playback will commence.
3
Press PAUSE/STILL during normal playback to pause
playback.
• A menu screen may appear on the TV screen,
if the disc has a menu feature. In this case,
press ▲, ▼, ◀, ▶ or ENTER to operate a menu
feature.
• To resume normal playback, press PLAY.
Frame Advance
Press PAUSE/STILL during still playback.
One frame is advanced each time you press PAUSE/
STILL.
Reading
• To resume normal playback, press PLAY.
Press STOP to end playback.
4
5
• The unit memorizes the stopped point,
depending on the disc. “ ” appears on the
screen. Press PLAY to resume playback (from
the scene point).
Slow-motion Playback
Press SLOW Reverse or SLOW Forward
during normal playback or still playback.
Each press of SLOW will change the speed of the
slow x1/2, x1/4, x1/6, x1/7.
• If you press STOP again (“ ” appears on the
screen) or unload the disc, the unit will clear the
stopped point.
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE/STILL.
Locating a chapter or track
Press (EJECT).
Remove the disc and then press POWER.
The unit turns off.
Press SKIP
Forward or SKIP
Reverse during
When you eject the disc, you may hear
mechanism noise, but it is not malfunction.
playback to locate a chapter that you want to watch.
Each time you press the button, a chapter or track is
skipped.
NOTE:
• If a non-compatible disc is loaded, “Incorrect Disc”,
“Region Code Error” or “Parental Error” will appear
on the TV screen according to the type of loaded
disc. If these appear, check your disc again (see
pages 9 and 34,35).
NOTE:
• The unit is capable of holding a still video image or
On screen display image on your television screen
indefinitely. If you leave the still video image or On
screen display image displayed on your TV for
an extended period of time, you risk permanent
damage to your television screen.
• Some discs may take a minute or so to start
playback.
• If an 8 cm disc is placed into the disc slot and
picture playback or menu display does not begin
automatically, press PLAY.
• There may be a slight delay between when you
press the button and the function activating.
• A “Prohibition” symbol “ ” may appear at the upper
right of the screen. This symbol means either the
feature you tried is not available on the disc, or the
unit cannot access the feature at this time. This
does not indicate a problem with the unit.
• If you place a single-faced disc label backwards (i.e.
the wrong way) “Reading” will appear in the display
and then “Incorrect Disc” will be displayed.
• Some playback operations of DVDs may be
intentionally fixed by software producers. Since
this unit plays DVDs according to the disc content
recorded, some playback features may not be
available. Also refer to the instructions supplied with
the DVDs.
MP3/WMA/JPEG and
Audio CD playback
This player can play back MP3/WMA/JPEG-data
which has been recorded on CD-R or CD-RW.
To produce MP3/WMA/JPEG-data, you need a
Windows-PC with CD-ROM drive and MP3/WMA/
JPEG-encoding software (not supplied).
The Apple-HFS-System cannot be played.
MP3/WMA/JPEG CD information
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CD is the disc that is
standardized by ISO9660, its file name must
include 3-digit extension letters, “mp3”, “wma”, “jpg”.
• The directory and file names of MP3/WMA/JPEG
CD must correspond to ISO standardized files.
• This unit can read 2000 files per disc. If one
directory has more than 2000 files, it reads up to
2000 files, the remaining files will be omitted.
• MP3/WMA CDs cannot be used for playback for the
purpose of recording.
Special playback
Fast Forward Playback
Press SEARCH
during normal playback.
Each press of SEARCH
will increase the speed of
(x 4), (x 8),
the search
(x 15).
(x 2),
(CD:
(x 2),
(x 4),
(x 8),
(x 20))
• To resume normal playback, press PLAY.
Review Playback
• It may take more than one minute for this unit
to read MP3/WMA/JPEG files depending on its
structure.
Press SEARCH
during normal playback.
Each press of SEARCH
will increase the speed
(x 4), (x 8),
of the search
(x 15).
(x 2),
(CD:
(x 2),
(x 4),
(x 8),
(x 20))
• To resume normal playback, press PLAY.
27
52D0201A_EN.indd 27
6/12/09 1:44:36 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
• Music recorded by “Joliet Recording Specification”
can be played back.
Press ▲ or ▼ to select the desired file.
4
• The music files recorded by “Hierarchical File
System” (HFS) cannot be played.
• The unit can play back baseline and progressive
JPEG files.
When PLAY is pressed after displaying file
browser displayed, playback begins automatically
starting from the first file.
In this case, if the first file is an MP3/WMA file,
only MP3/WMA files are played back in order. If
the first file is a JPEG file, the first JPEG file is
played back. If there is no file at a root directory,
playback does not begin automatically.
Limitations on display
• The maximum number for display is 15 characters.
Long file names will be condensed.
• Available letters for display are the following:
capital or lowercase letters A through Z, numbers 0
through 9, and _ (underscore).
/MP3-2.MP3
Select Files
Folder-1
Folder-2
MP3-1
Repeat :Off
• Other letters than those above placed any symbols
such as ΄, ~, +, / and etc.
Mode
:Off
MP3-2
MP3-3
Notes on MP3/WMA/JPEG files
WMA-1
WMA-2
WMA-3
JPEG Preview
To play back MP3/WMA/JPEG CD in the recorded
order,
1.Use MP3/WMA/JPEG software that records data
alphabetically or numerically.
Press ENTER.
5
6
2.Name each file including a two-digit or three-digit
number (e.g. “01” “02” or “001” “002”).
3.Refrain from making too many sub-folders.
The selected file starts playing back.
Press STOP to end playback.
• The unit records the stopped point. “
”
CAUTION:
appears on the screen. Press PLAY to resume
playback (from the scene point).
• Some MP3/WMA/JPEG CDs cannot be played
back depending on the recording conditions.
• The CD-R/RW that has no music data or non-MP3/
WMA/JPEG files cannot be played back.
• If you press STOP again or unload the disc, the
unit will clear the stopped point.
NOTE:
• During MP3/WMA/JPEG-Playback, you cannot
use JUMP and A-B Repeat functions.
• You can use Program playback, Repeat (Track
or All) and Random functions for MP3/WMA/
JPEG and Audio CD Playback (see pages 29
and 30).
MP3/WMA/JPEG CD and Audio CD
playback:
Load a MP3/WMA/JPEG CD or an Audio CD in
1
2
3
the disc slot.
“Reading” will appear on the TV screen. Reading
JPEG playback:
time will depend on the number of files on the disc.
A file browser screen will appear on the TV screen.
In the file browser, press▲/▼ to select the desired
1
Operation status
File number Elapsed time Selected file name
JPEG file.
To display a thumbnail list, press DVD MENU.
Press ▲/▼/◀/▶ to select the desired file.
(To return to the file browser, press TOP MENU.)
1/15 00:00:00
/MP3-5.MP3
MP3-5
Select Files
Repeat :Off
MP3-6
Tool kit
window
Mode
:Off
WMA-11
WMA-12
Picture-1
Picture-2
Picture-3
Picture-4
/Picture-01.JPG
File list
Select Files
Picture-01
Picture-02
Picture-03
Picture-04
Picture-05
Picture-06
Picture-07
Picture-08
Repeat :Off
Mode
:Off
Music Playing
W: 2048 H: 1536
Cursor
Preview window
File type
Press ENTER or PLAY.
: Indicates Music file (Audio CD/MP3/WMA)
: Indicates Picture file (JPEG)
2
3
The selected picture appears on the TV screen.
Rotating an image
• In case the current directory includes 9 files or
more, press ▲ or ▼ to scroll in the file list.
• To see contents in folder, select the folder and
then press ENTER. To return to the parent
directory, select “ Go Up ...” then press
ENTER.
You can rotate an image by 90 degrees.
Press ANGLE during playback of the image.
“
”, “ ”, “
” or “ ” appears on the screen.
Zooming an image
Zoom function also can be used in viewing JPEG
files.
• In case of a CD containing a mixture of MP3,
WMA and JPEG files, the files are played back
by selecting them from the file browser.
Press ZOOM (See “Zooming” on page 30).
Press STOP to end playback.
The file browser appears on the TV screen.
If you want to watch the other file, repeat steps 1-2.
28
52D0201A_EN.indd 28
6/12/09 1:44:37 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Files
The file type to make it display in the file browser can
be chosen.
Folder-1
Folder-2
MP3-1
Repeat :Off
Mode :Off
Edit Mode
MP3-2
Press ◀/▶ to select “Select Files” at right column
MP3-3
1
WMA-1
WMA-2
WMA-3
in the file browser.
JPEG Preview
• Press ENTER, then press ▲/▼ to select file
type from the list (Music or Picture).
Press ▲/▼/◀/▶ to select the file you want to add
2
3
Press ENTER to add/remove check mark.
2
3
into the program list.
Checked file type will be displayed in the file browser.
Press ENTER. Selected file was marked.
Press RETURN to save the setting.
Repeat this procedure to select the other files.
/MP3-1.MP3
Setting the JPEG
interval
Folder-1
Folder-2
MP3-1
Repeat :Off
Mode :Off
Edit Mode
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
You can continuously play back all JPEG files
automatically.
JPEG Preview
Press SETUP/TV MENU in the stop mode.
1
Press ▲/▼/◀/▶ to select “Add To Program”.
Then press ENTER. All marked files are added
into the program list.
When you finish storing the files you want into the
Program list, select “Edit Mode” again and press
ENTER to release edit mode.
Press ▲ or ▼ to select
option, then press ◀/▶
or ENTER.
Press ▲ or ▼ to select “JPEG Interval”, then press
2
3
▶ or ENTER.
Press ▲ or ▼ to select your desired time, then
press ENTER.
TV Screen
Display
: 16:9
: On
Folder-1
Folder-2
MP3-1
Edit Mode
Program View
Add To Program
Picture Mode : Auto
MP3-2
Off
MP3-3
JPEG Interval
WMA-1
WMA-2
WMA-3
5 Seconds
10 Seconds
15 Seconds
JPEG Preview
Press ▲/▼ to select “Program View”, then
press ENTER. Program View shows only the
programmed files that you have added in Step 2.
4
5
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at 5
second intervals.
Folder-1
Folder-2
MP3-1
MP3-1
MP3-2
MP3-3
WMA-3
Edit Mode
Program View
Add To Program
Edit Mode
Browser View
Clear Program
MP3-2
10 Seconds:
MP3-3
WMA-1
WMA-2
WMA-3
Plays back images in the form of a slide show at
10 second intervals.
JPEG Preview
JPEG Preview
Browser View
Program View
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
In the Program View, press PLAY. The files start
to playback in programmed order that were
added by you.
Press SETUP/TV MENU to remove the menu
4
screen.
To remove file from program list in stop mode
In the Edit Mode, switch to Program View. Select the
files you want to remove, then press ENTER. Select
“Clear Program” and press ENTER. Marked file is
removed from program list.
Program playback (CD)
You can arrange the order of tracks on the disc.
NOTE:
In the file browser, press ▲/▼/◀/▶ to select “Edit
1
• The program is cancelled when you eject the disc
or turn the power off.
Mode”, then press ENTER.
When “Edit Mode” is highlighted, you can mark
the files which you want to add into Program list.
29
52D0201A_EN.indd 29
6/12/09 1:44:38 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ▲/▼/◀/▶ to view a different part of the
frame.
Repeat playback (CD)
2
3
You may move the frame from the center position
UP, DOWN, LEFT or RIGHT.
In the file browser, press ▲/▼/◀/▶ to select
1
2
“Repeat”.
In the zoom mode press ZOOM repeatedly to
Press ENTER repeatedly to select “Track” or “All”.
return to a 1:1 view (
Off).
NOTE:
Folder-1
Folder-2
MP3-1
Select Files
• You can select the Pause, Slow or Search playback
in the zoom mode.
Repeat :Track
Mode
:Off
MP3-2
MP3-3
• Some discs may not respond to zoom feature.
WMA-1
WMA-2
WMA-3
JPEG Preview
Locating desired scene
Press PLAY.
3
Use the title, chapter and time recorded on the
disc to locate the desired point to play back.
The unit automatically starts repeat playback
after finishing the current track.
Press JUMP during playback or resume mode.
1
To resume normal playback, select Repeat : “Off”
in step 2.
Jump
Title
Chapter
Time
NOTE:
• The repeat or random function is canceled when
you eject the disc or turn the power off.
• The track repeat function is canceled when SKIP
Press ▲ or ▼ to select the “Title”, “Chapter” or
2
3
or
is pressed.
“Time”.
• In case of Audio CD, the function of A-B Repeat
also can be used (See “A-B Repeat playback” on
page 31).
Press Number buttons (0–9) to input the
number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to
check the numbers.
Random playback (CD)
Press ENTER.
4
In the file browser, press ▲/▼/◀/▶ to select
• Playback starts.
1
2
“Mode”.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above
operation.
Press ENTER to select “Random”.
Folder-1
Folder-2
MP3-1
Select Files
Repeat :Off
Mode
:Random
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
Repeat playback
Title, Chapter Playback:
JPEG Preview
Press PLAY MODE during playback or stop
1
2
Press PLAY.
3
mode.
The Random playback will start.
Press ENTER repeatedly to select “Chapter” or
To resume normal playback, select Mode : “Off”
in step 2.
“Title”.
The unit automatically starts repeat playback
after finishing the current title or chapter.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
Zooming
Play Mode
This unit will allow you to zoom in on the
frame image.You can then make selections by
switching the position of the frame.
Repeat
: Off
Press PLAY MODE again to make the screen
disappear.
3
Press ZOOM during playback.
1
The center part of the image will be zoomed in.
• In stop mode, press PLAY to start Repeat
playback.
Each press of ZOOM will change the ZOOM
magnification
(x 2.0).
1 (x 1.3),
2 (x 1.5) and
3
• To resume normal playback, select Repeat
“Off” in step 2.
30
52D0201A_EN.indd 30
6/12/09 1:44:39 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
A-B Repeat Playback:
Returning to the scenes:
A-B repeat playback allows you to repeat material
between two selected points.
Press MARKER during playback or stop mode.
1
Press ▲ or ▼ to select the Marker 1-3.
2
Press REPEAT A-B during playback.
1
The start point is selected.
Marker 1
Marker 2
Marker 3
00 27 54
01 16 25
02 08 31
A
Press ENTER.
3
Playback starts from the marked scene.
To cancel the mark:
Press REPEAT A-B again.
2
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point, returns to Point A automatically, then starts
again.
Press MARKER during playback or stop mode.
1
Press ▲ or ▼ to select the Marker 1-3.
2
Press CANCEL.
3
A
B
Press MARKER to remove this display.
NOTE:
• The marking is canceled when you eject the disc or
turn the power off.
• Some subtitles recorded around the marker may fail
to appear. [DVD]
To resume normal playback press REPEAT A-B
3
again.
“
” appears on the screen.
Changing soundtrack
language
Off
NOTE:
• Some discs may not work with the repeat operation.
• In A-B repeat mode, subtitles near point A or B may
not appear.
You can select the language when you play a
multilingual disc.
• During the A-B Repeat Playback the ANGLE
feature will not operate.
Press AUDIO during playback.
The current soundtrack language will appear.
1
• You may not be able to set A-B Repeat, depending
on the scenes of the DVD.
• A-B Repeat does not work with an interactive DVD,
MP3/WMA/JPEG-CD.
1/2 Eng Dolby Digital
Marking desired scenes
The TV/DVD stores the points that you want to
watch again.You can resume playback from that
scene.
Press AUDIO repeatedly until the desired
2
language is selected.
The on-screen display will disappear after a few
seconds.
M1arking the scenes:
NOTE:
Press MARKER during playback.
• If the desired language is not heard after pressing
AUDIO several times, the language is not recorded
on the disc.
Select the blank Marker using ▲ or ▼, then press
2
ENTER at the desired scene.
• Changing soundtrack language is canceled when
you eject the disc.
Marker 1
Marker 2
Marker 3
00 27 54
The initial default language or available language
will be heard if the disc is played back again.
• Up to 3 scenes can be selected.
• Repeat this procedure to set the other 2
scenes.
Press MARKER to remove this display.
3
31
52D0201A_EN.indd 31
6/12/09 1:44:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitles
Turning the subtitles on and off
When playing back a disc recorded with subtitles, you
can turn the subtitles on or off.
Title selection
Two or more titles are recorded on some discs.
If the title menu is recorded on the disc, you can
select the desired title.
Press SUBTITLE during playback until “Off” appears.
Press TOP MENU during playback.
1
Title menu appears on the screen.
Off
Press ▲/▼ or ◀/▶ to select the desired title.
2
Press ENTER or PLAY.
3
The playback of the selected title will start.
NOTE:
Changing the subtitle language
• Depending on the DVD, you may not be able to
select the title. Depending on the DVD, a “title
menu” may simply be called a “menu” or “title” in the
instructions supplied with the disc.
You can select the language when playing back a disc
recorded with multilingual subtitles.
Press SUBTITLE repeatedly during playback
1
until your desired language appears.
DVD menu
1/5 Eng
Some DVDs allow you to select the disc contents
using the menu.
When you playback these DVDs, you can select
the subtitle language and soundtrack language,
etc. using the DVD menu.
The on-screen display will disappear after a few
seconds.
2
Press DVD MENU during playback.
1
The DVD menu appears on the screen.
NOTE:
• Press DVD MENU again to resume playback at
the scene when you pressed DVD MENU.
• Changing subtitle language is canceled when you
eject the disc.
• Some functions may not work on some DVDs.You
may not be able to turn subtitles on or off or change
subtitles. While playing the DVD, the subtitle may
change when:
Press ▲/▼ or ◀/▶ to select the desired item.
2
Press ENTER.
3
The menu continues to another screen. Repeat
- you eject the disc.
steps 2 and 3 to set additional items if any.
- you change the title.
• In some cases, the subtitle language is not changed
to the selected one immediately.
Setting the language
Changing angles
You can select the language of “Menu”, “Subtitle”
and “Audio” if more than one languages are
recorded onto the disc.
When playing back a disc recorded with multi-
angle facility, you can change the view angle.
Press SETUP/TV MENU in the stop mode.
1
Press ANGLE during playback.
1
Press ▲ or ▼ to select
option, then press ◀/▶
or ENTER.
The current angle will appear.
Press ▲ or ▼ to select desired option, then press
2
3
1/2
▶ or ENTER.
Press ▲ or ▼ to select your desired language
(e.g. English), then press ENTER.
Menu
English
Francais
Espanol
Other
Subtitle
Audio
Press ANGLE repeatedly until the desired angle
2
is selected.
NOTE:
• Depending on the DVD, you may not be able to
change the angles even if multi-angles are recorded
on the DVD.
32
52D0201A_EN.indd 32
6/12/09 1:44:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
English, Francais, Espanol :
Setting on screen
display
The selected language will be heard or seen.
Other:
Other language can be selected (see the
“Language code list” on page 36).
On screen display can be switched on or off
when you press the any button.
Off (Subtitle):
Subtitles do not appear.
Press SETUP/TV MENU in the stop mode or No
1
Disc.
Original (Audio):
Press ▲ or ▼ to select
option, then press ◀/▶
The unit will select the first priority language of
each disc.
or ENTER.
Press ▲ or ▼ to select “Display”, then press ▶ or
2
3
Press SETUP/TV MENU to remove the menu
screen.
4
ENTER.
Press ▲ or ▼ to select “On” or “Off”, then press
ENTER.
NOTE:
• If the selected language is not recorded on the disc,
the first priority language is selected.
TV Screen
Display
: 16:9
Off
On
Picture Mode
Setting the aspect ratio
of TV screen
JPEG Interval : Off
You can select the aspect ratio of the picture.
On: On screen displays appear when you press
the buttons (factory setting).
Press SETUP/TV MENU in the stop mode or No
1
Off: On screen displays do not appear when you
press any buttons except SUBTITLE, PLAY
MODE, MARKER, DISPLAY, AUDIO and
JUMP.
Disc.
Press ▲ or ▼ to select
option, then press ◀/▶
or ENTER.
Press ▲ or ▼ to select “TV Screen”, then press ▶
2
3
or ENTER.
Press SETUP/TV MENU to remove the menu
screen.
4
Press ▲ or ▼ to select your desired screen type,
then press ENTER.
Setting the picture mode
TV Screen
Display
4:3
4:3
16:9
There are two types of source content in pictures
recorded in DVD video discs: film content
(pictures recorded from films at 24 frames
per second) and video content (video signals
recorded at 30 frames per second). Make this
selection according to the type of content being
viewed.
Picture Mode
JPEG Interval : Off
You have the following screen sizes to choose
from:
4:3
Letterbox
Press SETUP/TV MENU in the stop mode or No
1
When playing back a wide screen DVD disc, it
displays the wide picture with black bands at the
top and bottom of screen.
Disc.
Press ▲ or ▼ to select
option, then press ◀/▶
or ENTER.
4:3
Panscan
Press ▲ or ▼ to select “Picture Mode”, then press
2
3
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
▶ or ENTER.
16:9
Wide
Press ▲ or ▼ to select your desired picture mode,
A wide screen picture is displayed full size.
then press ENTER.
Press SETUP/TV MENU to remove the menu
4
TV Screen
Display
: 16:9
: On
screen.
Auto
Film
Video
Picture Mode
JPEG Interval
NOTE:
• It is not always possible for the DVD disc to display
the picture as per your preferred picture setting - for
example, if you select “4:3 Panscan”, the disc may
not offer this option. In this case the picture would
display the format the disc is capable of playing
back.
33
52D0201A_EN.indd 33
6/12/09 1:44:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto:
Night Mode
Digital Out
: Off
Off
PCM
Select this position normally.
The DVD player automatically detects source
content, film or video, of playback source.
Bitstream
Film:
Suitable for playback of film content pictures.
Video:
Suitable for playback of video content pictures.
Off:
There is no sound output from
DIGITAL AUDIO COAXIAL jack.
Change Dolby Digital to PCM for the
output. Select when connected to a 2
channel digital stereo amplifier.
Press SETUP/TV MENU to remove the menu
4
PCM:
screen.
NOTE:
Bitstream: Disc audio bitstream data will be
• Depending on the disc, pictures may be cut off or
doubled. In this case, select “Video”.
output.
Press SETUP/TV MENU to remove the menu
4
screen.
Night mode
NOTE:
Night Mode enables you to control the dynamic
range so as to achieve a suitable sound for your
equipment.
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
Press SETUP/TV MENU in the stop mode or No
1
• Even if you select “Bitstream”, MPEG audio will be
output in PCM format.
Disc.
Press ▲ or ▼ to select
option, then press
◀/▶ or ENTER.
Parental control
Press ▲ or ▼ to select “Night Mode”, then press
2
3
▶ or ENTER.
Some discs are specified not suitable for
children. Such discs can be limited not to play
back with the unit.
Press ▲ or ▼ to select “On” or “Off”, then press
ENTER.
On : Loud sounds such as explosions are toned
down slightly when played.
Password and setting:
Off : The unit will play the disc as recorded.
Press SETUP/TV MENU in the stop mode or No
1
Night Mode
Off
On
Disc.
Digital Out
Press ▲ or ▼ to select
option, then press
◀/▶ or ENTER.
Press ▲ or ▼ to select “Parental”, then press ▶ or
ENTER.
2
3
“Enter Password” screen will appear.
Press SETUP/TV MENU to remove the menu
screen.
Press “0000” using Number buttons (0-9). (This
is pre-setting password of this unit). Then press
ENTER.
4
• If you input a wrong number, press CANCEL.
Digital out
Parental
: Off
PasswEnter e
Password
You can select the digital output sound format
corresponding to your system connection.
Press SETUP/TV MENU in the stop mode or No
1
Disc.
Press ▲ or ▼ to select
option, then press
◀/▶ or ENTER.
The parental level list will appear. Press ▲ or ▼ to
select the level 1 to level 8. The limitation will be
more severe as the level number is lowered. Then
press ENTER.
4
Press ▲ or ▼ to select “Digital Out”, then press ▶
2
3
or ENTER.
Press ▲ or ▼ to select “Off”, “PCM” or “Bitstream”,
then press ENTER.
34
52D0201A_EN.indd 34
6/12/09 1:44:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
4
5
6
7
8
Parental
Temporary disabling of
rating level by DVD disc
Password
Some pre-recorded DVD discs may attempt to
temporarily cancel the rating level that you have
set.You will be given the option to allow or not
allow the override.
Off
• Level Off : The parental control setting does
not function.
Load a DVD disc (see page 26).
1
• Level 8
• Level 1
:
:
Virtually all DVD software can be
played back.
If the DVD disc has been designed to temporarily
2
DVD software for adults cannot be
played back.
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending
on which disc is played. If you select “YES” with
ENTER key, password input screen will then
appear.
• Select from level 1 to level 8. The limitation will
be more severe as the level number decreases.
Press SETUP/TV MENU to remove the menu
5
screen.
Enter the password with Number buttons (0-9).
3
Then press ENTER.
NOTE:
• If you interrupt the entering, press RETURN.
• If each setup (P.32~35) has been completed,
the unit will use these settings during DVD
playback.
Enter Password
Each setup will be retained in memory.
• Depending on the discs, the unit may not be able to
limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult”.
For those discs, the age restriction will not work.
• After the rating is locked, the setting cannot be
changed unless you enter the correct password.
Playback will commence if the entered password
4
was correct.
NOTE:
• This temporary cancellation of the rating level will
be kept until the disc is ejected.
When the disc is ejected, the original rating level will
be set again automatically.
Setting the new password:
Press SETUP/TV MENU in the stop mode or No
1
Disc.
Press ▲ or ▼ to select
option, then press
◀/▶ or ENTER.
Press ▲ or ▼ to select “Password”, then press ▶
or ENTER.
2
3
4
“Enter Current Password” screen will appear.
Press Number buttons (0-9) to enter the
password you have stored.
• If you input a wrong number, press CANCEL.
Then press ENTER. “Enter New Password”
screen will appear. Press Number buttons (0–9)
to input the new password.
Parental
: Off
Password
: Change
Enter New Password
Press ENTER.
5
Now your new password has been set.
Be sure to remember this number!
NOTE:
• If you forget your password it can be reset. With no
disc in the player and in DVD mode, press STOP on
the unit. Continue holding the button and press 7
on the remote control at the same time. “Password
Clear” appears on the screen. Now the password
has been return to the initial value (0000).
35
52D0201A_EN.indd 35
6/12/09 1:44:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 32).
Language Name
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code Language Name
1112 Fiji
1111 Finnish
1116 French
Code Language Name
1620 Lingala
1619 Lithuanian
1628 Macedonian
1635 Malagasy
1722 Malay
2111 Malayalam
1415 Maltese
1522 Maori
Code Language Name
2224 Singhalese
2230 Slovak
2321 Slovenian
2317 Somali
2329 Spanish
2322 Sundanese
2330 Swahili
2319 Swedish
2328 Tagalog
2325 Tajik
Code
2919
2921
2922
2925
1529
2931
2933
2932
3022
3017
3011
3030
3015
3018
1225
3019
3025
3028
3021
3033
3121
3128
3136
3219
3225
1335
3325
3418
2019
3525
3631
2927 Frisian
1123 Galician
1128 Georgian
1835 German
1129 Greek
1135 Greenlandic
1136 Guarani
1211 Gujarati
1531 Hausa
2122 Marathi
1724 Moldavian
1731 Mongolian
1811 Nauru
1933 Nepali
1819 Norwegian
1831 Oriya
1929 Panjabi
1924 Pashto, Pushto
1911 Persian
2324 Tamil
2411 Tatar
1224 Hebrew
1436 Hindi
2415 Telugu
2425 Thai
2528 Tibetan
2611 Tigrinya
2629 Tonga
1611 Turkish
2622 Turkmen
2630 Twi
2731 Ukrainian
2823 Urdu
2825 Uzbek
2831 Vietnamese
2923 Volapük
2911 Welsh
1714 Wolof
2928 Xhosa
2918 Yiddish
2924 Yoruba
2914 Zulu
1218 Hungarian
1228 Icelandic
1217 Indonesian
2335 Interlingua
1215 Irish
1711 Polish
2123 Italian
1930 Portuguese
2011 Quechua
2033 Rhaeto-Romance
2124 Romanian
2129 Russian
2121 Samoan
2135 Sanskrit
2125 Scots Gaelic
2131 Serbian
1311 Japanese
3618 Javanese
1325 Kannada
1828 Kashmiri
1329 Kazakh
1411 Kirghiz
2422 Korean
1524 Kurdish
1525 Laothian
1530 Latin
Danish
Dutch
English
Esperanto
Estonian
Faroese
2225 Serbo-Croatian
2211 Shona
2232 Sindhi
1625 Latvian, Lettish
36
52D0201A_EN.indd 36
6/12/09 1:44:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner’s Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the LCD TV/DVD to a VCR
Rear of the unit
VCR
To VIDEO/AUDIO IN
Video/Audio cord (not supplied)
To Video/Audio OUT
To connect the LCD TV/DVD to a VCR with an S-Video cord
If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also
connect the audio cables to the AUDIO IN jacks on the rear side of the unit.
The S-Video cable only carries the video signal. The audio signal is separate.
NOTE:
• When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable
takes precedence.
Rear of the unit
VCR
To S-VIDEO IN
S-Video cord (not supplied)
To S-Video OUT
Audio cord (not supplied)
To Audio OUT
To AUDIO IN
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD
player with the COMPONENT video cables (not supplied).
To Component OUT
Y
Rear of the unit
Pb
DVD
Component video cord (not supplied)
To COMPONENT
Pr
AUDIO IN
Audio cord
(not supplied)
To Audio OUT
To COMPONENT IN
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p progressive signals.
37
52D0201A_EN.indd 37
6/12/09 1:44:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to other equipment
(continued)
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
Rear of the unit
Audio cord (not supplied)
To PC/HDMI
To DVI Audio
output
AUDIO IN
DVI device
or
HDMI - to - DVI adapter cable
(HDMI type A connector)
To HDMI IN
HDMI device
(not supplied)
To HDMI out
HDMI cable (type A connector)
(not supplied)
NOTE:
• When using HDMI to connect your HDMI or DVI devices, you must select the corresponding audio
input source (HDMI or DVI) on the menu screen (see page 25). Otherwise you will only see the
image with no sound.
• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable
or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To
receive the picture you must change the output resolution on the external component.
Should you require further instruction, please contact the manufacturer of the external component.
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as
shown below.
Rear of the unit
Front
Speaker
Subwoofer
(Right)
TV/DVD
Front
Speaker
(Left)
Coaxial Digital
Audio Output
Coaxial digital cable
(not supplied)
To Coaxial
Center Speaker
Digital Audio Input
Surround
Surround
Speaker (Left)
Speaker
(Right)
AV Amplifier with built-in digital surround
decoder as listed above
NOTE:
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.
38
52D0201A_EN.indd 38
6/12/09 1:44:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to other equipment
(continued)
To connect the TV/DVD to a camcorder, or a TV Game
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of
signals generated by these devices and subsequent hook-up variations required, they have not all been
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for
additional information.
Rear of the unit
To VIDEO/AUDIO IN
or
Video/Audio cord
(not supplied)
To Video/Audio OUT
To connect the TV/DVD to a PC (Personal Computer)
Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and
Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA
connector PC MONITOR on the rear of the TV/DVD. Attach the connectors firmly with the screws on the plug. In
case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to
the AUDIO connector of the PC/HDMI AUDIO IN jack of the TV/DVD.You can also connect the PC with HDMI
cable. If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please
connect audio cord as same way as VGA cable.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV/DVD can operate as the computer monitor.
Rear of the unit
Monitor Display modes
MODE Resolution Refresh rate
VGA cable (not supplied)
To PC MONITOR IN
VGA
VGA
640x480 60/ 72/ 75 Hz
720x400 70Hz
SVGA 800x600 56/ 60/ 72/ 75 Hz
XGA 1024x768 60/ 70/ 75 Hz
WXGA 1280x768 60Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz
To HDMI IN
To return to normal mode
To PC/HDMI AUDIO IN
Press INPUT SELECT again.
HDMI cable (not supplied)
Audio cord (not supplied)
NOTE:
• The on-screen displays will have a different appearance in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.
39
52D0201A_EN.indd 39
6/12/09 1:44:45 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/
UHF antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV
system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected by tall buildings, hills or other large
objects. Changing the direction or position of the antenna may improve
the reception.
SNOW
If the TV is located far from the TV station, in a fringe reception area where
the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external antenna
may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a loss of
contrast in the picture. Changing the direction and position of the antenna
or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST or
BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
40
52D0201A_EN.indd 40
6/12/09 1:44:45 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local
dealer or service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POWER
POSSIBLE SOLUTIONS
PAGE
• Make sure the power cord is plugged in.
TV/DVD does not operate. • Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
12
TV BROADCAST RECEPTION
• Station or Cable TV experiencing problems, tune to another station.
• Check Volume adjustments or muting.
• Check for sources of possible interference.
17
17, 18
40
Poor sound or no sound.
Poor picture or no picture.
•
Station or Cable TV experiencing problems, tune to another station.
17
• Check antenna or Cable TV connections, reorient antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
13, 14
40
21, 22
• Station or Cable TV experiencing problems, tune to another station.
• Station signal is weak, reorient antenna to receive stronger station.
• Check for sources of possible interference.
17
13
40
Poor reception on some
channels.
•
Station or Cable TV experiencing problems, tune to another station.
17
15
• Make sure channels are set into memory.
• Check picture control adjustments.
Poor color or no color.
21, 22
13, 14
40
• Check antenna or Cable TV connections, reorient antenna.
• Check for sources of possible interference.
•
Station or Cable TV experiencing problems, tune to another station.
17
15
–
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Check antenna orientation.
Picture wobbles or drifts.
No Cable TV reception.
13
• Check all Cable TV connections.
14
15
17
• Set Signal Type option to the “Cable” mode.
• Station or Cable TV system problems, try another station.
Horizontal or diagonal
bars on screen.
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
13
40
No reception above
channel 13.
• Make sure Signal Type option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
15
13
• No broadcast on station tuned.
• Sleep Timer is set.
17
18
–
TV shuts off.
• Power interrupted.
• TV station experiencing problems or program tuned is not closed
captioned. Try another channel.
17
Closed - Caption is not
activated.
• Check Cable TV connection or VHF/UHF antenna, reposition or
rotate antenna.
13, 14
20, 21
15
• Set Closed caption in the menu.
Display is not shown in
your language.
• Select proper language in the menu options.
• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few non-
active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not
affect the performance of your product.
41
52D0201A_EN.indd 41
6/12/09 1:44:45 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems and troubleshooting
(continued)
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD
• No disc is inserted.
26
9
Playback doesn’t start.
No picture.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
9
• TV/DVD selector is not set correctly.
26
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
–
No sound.
27
38
• Select the correct Audio Output position on AV amplifier.
Picture is distorted during
CUE or REVIEW.
• The picture will be distorted occasionally.
–
Stopping playback,
search, slow-motion play,
repeat play, or program
play, etc. cannot be
performed.
• Some discs may not allow some functions.
–
No on-screen display.
No surround sound.
• Select Display On.
• The setup does not match your stereo system.
33
38
The unit or remote
operation key is not
functioning.
• Turn off the unit and unplug the AC power cord for several minutes,
then replug it.
12
Playback does not start
when the title is selected.
• Check the Parental setup.
34, 35
Audio soundtrack and/or
subtitle language is not
changed when you play
back a DVD.
• Multilingual language is not recorded on the DVD disc.
31, 32
• Some discs have no subtitles.
No subtitle.
32
32
• Subtitles are cleared. Press SUBTITLE.
Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.
“
” appears on the
• The function is prohibited with the unit or the disc.
27
screen.
REMOTE CONTROL
• Aim at the remote control at the remote sensor.
• Operate within Approx. 15 feet or reduce the light in the room.
• Clear the path of the beam.
The remote control does
not function.
12
• The batteries are weak. Replace the batteries.
•
Check the batteries are inserted correctly.
42
52D0201A_EN.indd 42
6/12/09 1:44:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GENERAL
Power supply
Power consumption
AC 120V 60Hz
Operation: 51W
Stand by: 0.8W
4.7 kg (10.4 lbs)
Width: 536.5 mm (21-1/8 inches)
Height: 397 mm (15-5/8 inches)
Depth: 183 mm (7-3/16 inches)
5˚C - 40˚C
Less than 80%
Weight
Dimensions
Operating temperature
Operating humidity
TELEVISION
Type
21.60 inches (547.7 mm diagonal)
Transmission TFT color LCD panel
1366 (H) x 768 (V)
Display method
Number of Pixels
Broadcasting system
US system M
ATSC standard (8VSB), QAM
Receiving channels
VHF
2-13
UHF
14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-135 (100)-(135)
01 (4A)
Tuner type
Inputs
Frequency synthesized
S-Video: Y-Input:1.0 V (p-p), 75 ohms
C-Input:0.3 V (p-p), 75 ohms
Video: (RCA) 1 V p-p/75 ohms
Audio:
(RCA) –8 dBm/50K ohms
Component video:
(Y) 1 V (p-p), 75 ohms
(PB)/(PR) 0.7 V (p-p), 75 ohms
HDMI: HDMI compliant (type A connector)
HDCP compliant
E-EDID compliant
Suggested scan rates: 1080i, 480p, 480i, 720p
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
PC Monitor: Mini-Dsub 15pin x 1
Antenna:
VHF/UHF In 75 ohms coaxial
Outputs
Speaker
Audio output power
DVD/CD player
Signal system
Applicable disc
Digital audio out:
0.5 Vp-p 75 ohms terminated
25.4 mm x 68.6 mm (1 inches x 2-11/16 inches), 8 ohms x 2
1.5W + 1.5W
NTSC
1.DVD (12 cm, 8 cm)
2.CD (12 cm, 8 cm)
Pickup
CD: Wavelength: 790 nm
Maximum output power: 7 mW
DVD: Wavelength: 655 nm
Maximum output power: 5 mW
ACCESSORIES
Remote control
Batteries (UM-4) x 2
AC Cord
Stand
Screw x 2
Designs and specifications are subject to change without notice.
43
52D0201A_EN.indd 43
6/12/09 1:44:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TTE Technology, Inc. (“TTE”) Limited Warranty
All LCD Models
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND
AS DESCRIBED BELOW TTE EXPRESSLY DISCLAIMS, ALL ACTUAL AND IMPLIED WARRANTIES WITH
RESPECT TO ANY PRODUCT USED FOR INSTITUTIONAL OR OTHER COMMERCIAL PURPOSES (INCLUDING
BUT NOT LIMITED TO RENTAL PURPOSES).
What your warranty covers: Defects in materials or workmanship to the original owner
New LCD Televisions - Screen Sizes 32” and smaller:
• For how long after your purchase:
•
Ninety (90) days from date of purchase for labor charges. After ninety (90) days, labor charges will be at owner
expense.
•
One (1) year from date of purchase for parts.
• What we will do:
At TTE’s discretion, pay an Authorized RCA Service Center for both labor charges and parts to repair your
television, or replace your television with a new or refurbished/remanufactured unit.
See “How to get service”
•
•
New LCD Televisions - screen sizes 33” through 47”:
• For how long after your purchase:
•
•
One (1) year from the date of purchase for labor charges.
One (1) year from the date of purchase for parts.
• What we will do:
At TTE’s discretion, pay an Authorized RCA Service Center for labor charges and parts to repair your television,
or replace your television with a new or refurbished/remanufactured unit.
See “How to get service”
•
•
All Remanufactured/Refurbished LCD Televisions:
• For how long after your purchase:
•
•
Ninety (90) days from date of purchase for labor charges.
Ninety (90) days from date of purchase for parts.
• What we will do:
At TTE’s discretion, pay an Authorized RCA Service Center for both labor charges and parts to repair your
television, or replace your television with a refurbished/remanufactured unit.
See “How to get service”
•
•
How to get service:
•
Call 1-800-951-9582. Please have your unit’s date of purchase and model/serial number ready. The model/serial
number information can be found on the back of your unit.
•
•
A representative will troubleshoot your problem over the phone.
If it is determined that your unit requires service, the service location will be at the sole discretion of TTE based upon
the TTE Limited Warranty statement.
•
•
At the sole discretion of TTE, television screen sizes 32” and smaller is either consumer carry-in to an
Authorized RCA Service Center or directly exchanged for a new or refurbished/remanufactured unit.
At the sole discretion of TTE, television screen sizes 33” through 47” is either consumer carry-in to an
Authorized RCA Service Center or directly exchanged for a new or refurbished/remanufacture unit.
•
Proof of purchase in the form of a bill of sale or receipted invoice from an Authorized Dealer which is evidence that
the product is within the warranty period must be presented to obtain warranty service.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional
information should be obtained from your dealer.)
•
•
•
•
•
•
Installation and related adjustments.
Damage resulting from non-approved installation methods.
Signal reception problems not caused by your unit.
Damage from misuse or neglect.
Batteries.
A television that has been modified or incorporated into other products or is used for institutional or other
commercial purposes (including but not limited to rental purposes).
A unit purchased or serviced outside the U.S.A.
•
•
•
Acts of nature, such as but not limited to lightning damage.
Special, incidental or consequential damages.
Product Registration:
•
television. It will make it easier to contact you should it ever be necessary. The return of the card is not required for
warranty coverage.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL
OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL
CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CONSUMER. TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF
44
52D0201A_EN.indd 44
6/12/09 1:44:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER
OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF
INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE
APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE.
How State Law relates to this warranty:
•
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
•
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
If you purchased your unit outside the United States or seek warranty coverage outside the United States:
•
This warranty does not apply. Contact your dealer for warranty information.
Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs
of such service calls are the sole responsibility of the purchaser.
TTE Technology Canada Ltd. (“TTE”)
Limited Warranty
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND
AS DESCRIBED BELOW TTE EXPRESSLY DISCLAIMS, ALL ACTUAL AND IMPLIED WARRANTIES AND
CONDITIONS WITH RESPECT TO ANY PRODUCT USED FOR INSTITUTIONAL OR OTHER COMMERCIAL
PURPOSES (INCLUDING BUT NOT LIMITED TO RENTAL PURPOSES).
• What your warranty covers:
•
Defects in materials or workmanship to the original purchaser.
• For how long after purchase:
•
•
All RCA televisions: One year parts and labor.
All RCA Scenium televisions: One year parts and labor.
• What TTE Technology Canada Ltd. will do:
•
At TTE’s discretion, pay an Authorized RCA Service Centre for both labor charges and parts to repair your
television, or replace your television with a new or refurbished/remanufactured unit.
•
See “How to get service”
How to get service:
•
Call 1-866-465-7157 (French: 1-800-522-0445). Please have your unit’s date of purchase and model/serial number
ready. The model/serial number information can be found on the back of your unit.
A representative will troubleshoot your problem over the phone.
•
•
If it is determined that your unit requires service, the service location will be at the sole discretion of TTE based upon
the TTE Limited Warranty statement.
•
•
•
At the sole discretion of TTE, RCA CRT DV televisions are either consumer carry-in to an Authorized RCA
Service Centre or directly exchanged for a new or refurbished/remanufactured unit.
At the sole discretion of TTE, RCA LCD televisions are either consumer carry-in to an Authorized RCA Service
Centre, directly exchanged for a new or refurbished/remanufacture unit or provided in-home service.
At the sole discretion of TTE, RCA Scenium LCD televisions are either consumer carry-in to an Authorized RCA
Service Centre, directly exchanged for a new or refurbished/remanufacture unit or provided in-home service.
•
Proof of purchase in the form of an original bill of sale or receipted invoice from an Authorized Dealer which is
evidence that the product is within the warranty period must be presented to obtain warranty service.
• Your warranty does not cover damages which are caused by:
•
•
Fire, accident, lightening, flood and/or other acts of God;
Faulty installation, set-up adjustments, improper antenna, inadequate signal reception, adjustment of
consumer controls and/or improper maintenance; and/or
•
Failure which results from misuse, abuse, neglect, mishandling, misapplication, and/or alteration.
What your warranty does not cover:
•
•
Customer instruction (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional
information should be obtained from your dealer);
Transportation cost to and from the Service Centre (Unless you have made other arrangements with your dealer at
the time of purchase whereby he undertakes this responsibility);
Installation and set-up service adjustments;
•
•
•
•
•
•
Products connected otherwise than as outlined in the Owner’s Manual;
Products on which the serial number has been altered or removed;
External antenna or cable systems;
Remote control batteries;
A television that has been modified or incorporated into other products or is used for institutional or other
commercial purposes (including but not limited to rental purposes);
A unit purchased or serviced outside Canada;
•
•
•
Special, incidental or consequential damages; and/or
Normal wear or cosmetic damage.
How Provincial law relates to this warranty:
•
This warranty gives you specific legal rights, which are in addition to statutory warranties, which may vary from
Province to Province and which take precedence over the terms of this warranty.
If you purchased your unit outside of Canada:
•
This warranty does not apply. Contact your dealer for warranty information.
©2009 TTE Technology Canada Ltd.
6605 Hurontario Street, Mississauga, Ontario L5T 0A3
45
52D0201A_EN.indd 45
6/12/09 1:44:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
52D0201A_EN.indd 46
6/12/09 1:44:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
52D0201A_EN.indd 47
6/12/09 1:44:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only
add delays in service for your product.
TTE Technology, Inc.
5541 W. 74th Street
Indianapolis, IN 46268
©2009 TTE Technology Inc.
RCA and associated marks are trademarks of THOMSON S.A.
used under license to TTE Corporation.
Printed in Thailand
N
J52D0201A SH 09/06
52D0201A_EN.indd 48
6/12/09 1:44:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|