USER‘S
GUIDE
RP-9990
DOLBY PROLOGIC
AMPLIFIER IN A SUBWOOFER
RP9990-1
1
10/10/00, 11:51 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e o f Co n t e n t s
Sa f e t y Pr e c a u t io n s ............................................ 2
im p o r t a n t In f o r m a t io n ................................ 2
p r e c a u t io n s ........................................................... 2
f o r y o u r sa f e t y ................................................... 2
im p o r t a n t b a t t e r y In f o r m a t io n .............. 2
se r v ic e in f o r m a t io n ......................................... 2
Fo r Yo u r Re c o r d s ................................................ 2
Ta b l e o f Co n t e n t s ............................................... 3
Fir st Th in g s Fir st ................................................. 4
Un pa c k t h e sy st em ............................................ 4
Ch ec k f o r m o ist u r e .......................................... 4
Ch o o se a Lo c a t io n ............................................ 4
SETTIN G UP TH E SYSTEM ........................................ 5
r ea r pa n el c o n n ec t io n .................................. 5
a u x ............................................................................. 5
c d ................................................................................. 5
t v ................................................................................. 5
su r r o u n d spea k er s (8 o h m ) .......................... 5
spea k er s r / c / l (4 o h m ) ...................................... 5
su bw o o f er v o l u m e c o n t r o l ....................... 5
a c v o l t a g e sel ec t o r s sw it c h ....................... 5
c o n n ec t in g spea k er s ....................................... 6
GEN ERAL H IN TS FOR CON N ECTIN G ................. 6
CON N ECTIN G TH E FRON T SPEAKERS ............... 6
CON N ECTIN G TH E SURROUN D SPEAKERS ...... 6
POSITION IN G SPEAKERS........................................ 7
GEN ERAL H IN TS FOR POSITION IN G
M UTE LED IN DICATOR .......................................... 8
VOLUM E ( / -).............................................................. 8
SURROUN D M ODE .................................................. 8
AUDIO SOURCE (TV/ CD/ AUX) ............................. 8
l ,c ,r ,s, l ed in d ic a t o r ......................................... 8
Usin g t h e r e m o t e c o n t r o l ............................. 9
ba t t er y in st a l l a t io n ....................................... 9
g en er a l c o n t r o l s .............................................. 9
po w er ........................................................................ 9
m u t e ........................................................................... 9
t v ................................................................................. 9
c d ................................................................................. 9
a u x ............................................................................. 9
n o r m a l c en t er .................................................... 9
ph a n t o m c en t er ................................................ 9
by pa ss ........................................................................ 9
t est t o n e ................................................................. 9
su r r o u n d ( / -) ........................................................ 9
c en t er ( / -)................................................................ 9
ba l a n c e r eset ........................................................ 9
ba l a n c e ( / -)............................................................. 9
ba ss ( / -) ..................................................................... 9
t r ebl e ( / -) ................................................................. 9
a u d io r eset ............................................................ 9
v o l ( / -) ....................................................................... 9
u sin g t h e sy st e m .................................................. 10
Pr o Lo g ic m o d e .................................................... 10
N ORM AL m o d e ....................................................... 10
ph a n t o m m o d e ................................................... 10
sel ec t in g t h e Pr o Lo g ic m o d e .................... 10
t r o u b l e sh o o t in g t ip s ....................................... 11
e q u ip m e n t sp e c if ic a t io n s ................................ 12
c a r e a n d m a in t e n a n c e .................................... 12
in d e x ......................................................................... 13
l im it e d w a r r a n t y ............................ b a c k c o v e r
TH E SPEAKERS .......................................................... 7
POSITION IN G TH E CEN TER SPEAKER ................ 7
POSITION IN G TH E FRON T SPEAKERS ............... 7
POSITION IN G TH E SURROUN D SPEAKERS ...... 7
CON N ECTIN G FOR POWER ................................... 7
Ge n e r a l Co n t r o l s ............................................... 8
FRON T PAN EL DESCRIPTION ............................... 8
POWER ON / STAN DBY ............................................ 8
3
RP9990-1
3
10/10/00, 11:51 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Fir st Th in g s Fir st
SUBWOOFER
Un pa c k t h e sy st e m
Unpack the system and its accessories. You should
have:
POWER
MUTE
TV
CD
AUX
NORMAL
BYPASS
PHANTOM
TEST
TONE
CENTER
TREBLE
BASS
SURROUND
BALANCE
RESET
BALANCE
•
•
•
•
•
•
•
one subwoofer
AUDIO
RESET
VOL
two front speakers
RP9990
two surround speakers
one center speaker with remote control sensor
one remote control
REMOTE
CONTROL
five speaker wires
built-in cable for remote control
Ch e c k f o r m o ist u r e
Just as moisture can form on the inside of windows
on a cold day, it can also form on the inside of your
stereo, causing it to malfunction. Some situations in
which condensation might form include the
following:
CENTER SPEAKER
WITH REMOTE
CONTROL SENSOR
•
•
•
Immediately after a heater has been turned on;
In a steamy or very humid room;
SURROUND
SPEAKERS
When the system is suddenly moved from a cold
environment to a warm, moist one; for example,
in moving the stereo from a cool air conditioned
room to an outside porch on a humid, summer
day.
BLACK/BLUE WIRE (1)
If moisture forms inside the unit, it may not operate
properly. To correct the problem, turn off the power
and wait about 30 minutes for moisture to
evaporate.
BLACK/RED WIRE (2)
BLACK/GREY WIRE (2)
Ch o o se a Lo c a t io n
These guidelines should be followed when deciding
on a place to put your stereo system:
FRONT SPEAKERS
•
•
•
•
Choose a level, solid, surface. Don’t place it on a
soft surface, such as carpeting or foam rubber.
Choose a location away from direct sunlight,
radiators, air ducts, and other sources of heat.
Avoid locations that are subject to moisture,
mechanical vibration, shock, or excessive dust.
Make sure that the location has adequate air
circulation. Good ventilation is essential to
protect the system from internal heat build up.
Be a Pack Rat
It is a good idea to keep the box and all of the packing
materials your system came with in case you need to store,
move or ship the unit at a later date.
•
To avoid color interference, the unit should also
be placed at least one to two feet from the
television.
4
RP9990-1
4
10/10/00, 11:51 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTIN G UP TH E SYSTEM
r e a r pa n e l c o n n e c t io n
a u x
SURROUND
SPEAKERS
SPEAKERS
C
Connect the audio output (typically the AUX OUT)
from an existing audio output amplifier or receiver
here. Audio sources connected to the receiver or
amplifier can be heard through the RP9990.
R
L
R
L
AUX
CD
TV
+
+
+
+
L
REMOTE
SENSOR
INPUT
R
-
-
-
-
c d
SUBWOOFER
Connect the audio output from a CD player here. The
audio from the CD player can be heard through the
TH900.
MIN
MAX
VOLUME
t v
Connect the audio output from a TV here. The audio
from the TV can be heard through the TH900.
SURRO UN D SPEAKERS (8 o h m )
Connect the supplied Left and Right Surround
Speakers here.
sp e a k e r s R/ c / l (4 o h m )
Connect the supplied Right and Center and Left Front
Speakers here.
SUBWO O FER VO LUM E CO N TROL
You can adjust the subwoofer’s output power by
rotating the subwoofer volume control at the back
of the unit.
5
RP9990-1
5
10/10/00, 11:51 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g u p t h e sy st e m
Co n n e c t in g sp e a k e r s
FRONT SPEAKERS
CENTER SPEAKER
BLUE WIRE
RED WIRE
RED WIRE
FRONT
SPEAKER
L
R
C
SURROUND
SPEAKERS
SPEAKERS
C
R
L
R
L
AUX
CD
TV
+
+
+
+
L
REMOTE
SENSOR
INPUT
R
-
-
-
-
BLACK WIRE
BLACK WIRE
SUBWOOFER
BLACK WIRE
MIN
MAX
VOLUME
REMOTE
SENSOR
INPUT
GREY WIRE
GREY WIRE
SURROUND
SPEAKERS
SURROUND SPEAKERS
R
L
RIGHT
LEFT
BLACK WIRE
BLACK WIRE
g e n e r a l h in t s f o r c o n n e c t in g
c o n n e c t in g t h e f r o n t sp e a k e r s
1. At the rear of the speakers, you will find two
quick-connect terminals: a black one marked (-)
and a red one (for the Front Speaker) or a white
one (for the Surround Speaker) or a blue one
(for center speaker) marked (+).
1. Connect the Right Front Speaker to the Front
Speaker (R) terminals on the back of the main
unit, and the Left Front Speaker to the Front
Speaker (L) terminals. Center Front Speaker to the
Front Speaker (C) terminals.
2. Speaker wires are identified with different colors
so that you can distinguish between them.
2. Make sure the (+) and (-) cables are connected to
the correct Front Speaker terminals which are (+)
to (+) and (-) to (-).
3. In order to prevent improper phasing between
the speakers, be sure to make the same
connection at both ends of the speaker wires
(match the wire colors to the corresponding
speaker terminals).
3. Plug the Remote Control Sensor wire into the
REMOTE SENSOR INPUT on the back panel.
c o n n e c t in g t h e su r r o u n d
sp e a k e r s
1. Connect the Right Surround Speaker to the
Surround Speaker (R) terminals at the back of the
main unit, and the Left Surround Speaker to the
Surround Speaker (L) terminals.
4. To connect the speaker wire, push and hold the
speaker terminal tab down to insert the wire,
release the tab to lock the wire in the terminal.
Make sure the insulation is completey removed
form the ends of the speaker wires at all
connection points.
2. Make sure the (+) and (-) cables are connected to
the correct Surround Speaker terminals which are
(+) to (+) and (-) to (-).
6
RP9990-2
1
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g u p t h e sy st e m
p o sit io n in g sp e a k e r s
the Front Speaker (R) terminals is to the right of the
listener. This can be checked with the balance control
on the remote control.
g e n e r a l h in t s f o r p o sit io n in g
t h e sp e a k e r s
Avoid placing the speakers in a corner or on the
floor, as this will accentuate the bass excessively.
The optimum height for the Front Speakers is attained
when the high-frequency drivers (tweeters) are at ear
level (while the listener is seated).
Placing the speakers behind curtains, furniture or
other obstacles will reduce the high-frequency
response, thereby reducing the stereo effect
considerably. For the best performance, the listener
should have an unobstructed view of the speakers.
NOTE: To avoid magnetic interference with the
picture on your TV, do not position the front
speakers too close to the TV.
Each room has different acoustic properties and
options for speaker placement are often limited. You
can find the best position for your speakers by
experimenting. In general, the speakers should be
arranged as symmetrically as possible within the
room.
p o sit io n in g t h e su r r o u n d sp e a k e r
The Surround Speakers connected to the Surround
Speaker (L) terminals of the main unit should be to the
left of the listener and the speaker connected to the
Surround Speaker (R) terminals should be to the right.
The Surround Speakers should face each other and be
aligned with or behind the listener.
p o sit io n in g t h e c e n t e r sp e a k e r
Using wall brackets, you can mount the Surround
Speakers to the wall. The recommended mounting
height is 5-6 feet from the floor.
The Center Speaker should be placed centrally
between the Front Speakers, e.g., underneath or on
top of the TV. The best height for the Center Speaker
is at ear level (while the listener is seated).
Do not put anything in front of the Center speaker
to block the path of the Remote Control and affect
the sensor performance.
Co n n e c t in g f o r p o w e r
Plug the power cord into an AC power outlet.
Po sit io n in g t h e f r o n t sp e a k e r s
The Front Speakers should be arranged so that,
viewed from the listener’s position, the speaker
connected to the Front Speaker (L) terminals of the
main unit is to the left and the speaker connected to
7
RP9990-2
2
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge n e r a l Co n t r o l s
FRO N T PAN EL DESCRIPTIO N
PO WER O N / st a n d b y
The power on/off function has two modes of
operation:
1. Manual: Press the POWER button to turn the
system on and off (When the POWER button is in
the off (OUT) position, the system does not
respond to commands from the remote control).
2. Remote ON/STANDBY: Press the POWER button to
turn the system on. The system can then be turned
off (and back on again) by remote control.
m u t e l e d in d ic a t o r
1. The STANDBY/MUTE LED flashes when the audio
muting is activated.
v o l u m e (+/-)
Press the (+) or (-) button to adjust the Volume level
up or down.
su r r o u n d m o d e
Press to select the SURROUND MODE, and the LED
indicator will light. The system will recall the previous
Pro Logic mode: NORMAL, PHANTOM or BYPASS.
AUDIO SO URCE (TV/ CD/ AUX)
Press repeatedly to select the input source: AUX, TV,
or CD. The corresponding LED indicator will light.
l , c , r , s. l e d IN DICATOR
When press remote control Test Tone Key in the Pro
Logic normal mode, the LED will light in cycle:
L-C-R-S-L.
When press remote control Test Tone Key in the Pro
Logic Phantom mode, the LED will be light in cycle:
L-R-S-L.
When in Bypass, the LED won’t be lit.
To cancel the TEST TONE function, press Surround
Source button on the front panel or the remote
control except the following: CENTER LEVEL (+)/(-),
SURROUND (+)/(-), VOLUME (+)/(-) or BALANCE (+)/(-).
8
RP9990-2
3
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g t h e r e m o t e c o n t r o l
Ba t t e r y In st a l l a t io n
1. Open the battery compartment door.
2. Insert 2 AA-size batteries as indicated on the
back of the remote control.
3. Close the battery compartment door.
POWER
MUTE
TV
CD
AUX
NORMAL
BYPASS
PHANTOM
TEST
TONE
CENTER
TREBLE
BASS
SURROUND
BALANCE
RESET
BALANCE
Ge n e r a l Co n t r o l s
AUDIO
RESET
VOL
POWER – When the system is in Standby mode, press
the POWER button to switch unit ON or back to
Standby.
MUTE – Press to mute on or off the sound.
TV – Select the TV input.
RP 9990
CD – Select the CD input.
AUX – Select the AUX input.
NORMAL CENTER – Select the Dolby Pro Logic
Normal Center mode.
PHANTOM CENTER – Select the Dolby Pro Logic
Phantom Center mode.
BYPASS – Press to select Bypass (2CH) mode.
TEST TONE – Press to begin the TEST TONE function
while in
Pro Logic mode. Press any key to stop the
TEST TONE function.
SURROUND +/- – To adjust the Surround level.
BALANCE +/- – To adjust the balance level.
BALANCE RESET – To reset the balance level.
CENTER +/- – To adjust the Center level.
BASS +/- – To adjust the Bass level.
In Your Sights
The remote control works by line-of-sight, which means
that for best results, you should aim the remote directly
at the front of the Center Speaker.
TREBLE +/- – To adjust the Treble level.
LEVEL RESET – To reset the audio level.
VOL +/- – To adjust the master volume level.
9
RP9990-2
4
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g t h e sy st e m
p r o l o g ic m o d e
se l e c t in g t h e p r o l o g ic
m o d e
1. Turn the main unit on and select the input
SOURCE.
Choose this feature when playing movies and music
encoded with Dolby Surround, such as Laser Disc,
Video cassettes and certain compact discs. Many
current TV broadcasts are also encoded with Dolby
Surround Sound.
2. Press the SURROUND MODE button on front
panel or the NORMAL CENTER button on the
remote control.
Pro Logic Sound, by adding a center channel speaker
to the main and surround speakers, stablizes the
action occurring at the center of the screen. The Pro
Logic system recaptures the full richness and depth
of a Dolby Surround encoded film, for enjoyment in
the comfort of your own home.
3. Select the desired mode, NORMAL, PHANTOM
and BYPASS by pressing SURROUND MODE on the
front panel or the representative key on the
remote control.
There are two different Center mode options when
using the Pro Logic Feature:
4. If the source is a Hi-Fi Stereo VCR or Laser Disc
Player, play a Dolby Surround encoded material.
Make sure the volume on the television is turned
down completely, then adjust the volume on the
main unit to the desired level.
NORMAL and PHANTOM.
n o r m a l m o d e
In the NORMAL mode, the low-frequency sounds
occuring out of the center speaker would normally
be routed to the right and left main speakers.
Because this system uses a subwoofer to produce
most of the low-frequency sounds, the low-frequency
sounds are directed to the subwoofer.
p h a n t o m m o d e
In the PHANTOM mode, all sound that would
normally be routed to the CENTER channel speaker is
routed equally to left and right main speaker. This
creates the illusion that the sound is coming from
the area centered between the main speakers. The
CENTER SPEAKER is not used in this mode.
10
RP9990-2
5
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tr o u b l e sh o o t in g t ip s
Problem
Solution
System doesn’t turn on
•
•
•
•
•
•
•
Make sure power cord is securely plugged into the AC power outlet.
Unplug the unit for a moment, and then plug it back in.
Check the outlet by plugging in another device.
Adjust volume setting.
No sound
Check for proper connection of speaker wires.
Make sure you’ve selected the correct function: AUX, TV or CD.
Make sure volume is not muted. To deactivate, press MUTE on the
remote.
Remote control doesn’t work
•
•
Make sure the audio system is plugged into a working AC outlet.
Make sure that the batteries are correctly installed in the remote
control.
•
•
Make sure batteries in the remote are okay. Replace weak batteries..
Point the remote directly at the front of the center speaker’s RCA logo
while pressing the buttons.
•
•
•
Move closer to the unit with the remote control.
Make sure that there are no obstacles between the remote and the unit.
Make sure main unit power button is pressed into Standby mode.
11
RP9990-3
1
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
e q u ip m e n t sp e c if ic a t io n s
Operating Voltage
: 120 +/- 10% VAC 60 Hz
Left / Center / Right (at 4
)
: 10 Watts / 10 Watts / 10 Watts
0.9% THD @ 1 KHz
Rear Surround (at 8
)
: 5 Watts / 5 Watts
0.9% THD @ 1 KHz
Subwoofer Power
Muting Attenuation
Frequency Response
Input Sensitivity
Signal to Noise Ratio
Cross Talk
: 20 Watts
: 50 dB
: 40 - 20 KHz +/- 3 dB
: 200 mV
: 60 / 65 dB @ 1 KHz
: 60 dB @ 1 KHz
Specifications are based on nominal measurements
Ca r e a n d m a in t e n a n c e
Cl ea n in g t h e Ex t er io r
Disconnect the system from AC power before
cleaning the exterior of the system with a soft dust
cloth.
NOTE: Do not use volatile solvents such as
alcohol, paint thinner, gasoline or benzine, etc.
to clean the unit.
12
RP9990-3
2
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
IN DEX
A
L
AC selector switch 5
AUX 5, 9
L,C,R,S LED Indicator 8
Left Speaker 5
Level Reset 9
B
M
Balance (+/-) 9
Balance Reset 9
Battery Installation 9
Bass (+/-) 9
Mute Button 8, 9
P
Bypass 9
Positioning Center Speaker 7
Positioning Front Speaker 7
Positioning Surround Speaker 7
Power On/Standby 8, 9
Prologic Mode 9, 10
C
Care and Maintenance 12
CD 5, 9
Center (+/-) 9
Prologic Normal 9, 10
Center Speaker 4
Prologic Phantom 9, 10
Connecting AC power 7
Connecting AUX 5
Connecting CD 5
R
Remote Control 4
Remote Control Function 9
Connecting Center Speaker 5
Connecting Front Speaker 5
Connecting Surround Speaker 5
Connecting TV 5
S
Source 8, 9
Subwoofer 4
e
Surround Mode 8, 9
Surround Speaker 4
Equipment Specifications 12
F
Front Speaker 4
T
Test Tone 9
Treble 9
Troubleshooting 11
TV 5, 9
I
Index 13
V
Volume 8, 9
W
Wires 4
13
RP9990-3
3
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
LIM ITED Wa r r a n t y
What your w arranty covers:
•
Any defect in materials or workmanship.
For how long after your purchase:
•
One year. (The warranty period for rental units begins with the first rental or 45 days from date of shipment to the
rental firm, whichever comes first.)
What w e w ill do:
•
•
Provide you with a new, or at our option, a refurbished unit.
The exchange unit is under warranty for the remainder of the original product’s warranty period.
How to make a w arranty claim:
•
Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend
using the original carton and packing materials.
•
•
Remove cassette tapes or CDs from unit before shipping as there will not be returned.
Include in the package evidence of purchase date such as the bill of sale. Also print your name and address and a
description of the defect. Send standard UPS or its equivalent to:
Thomson Consumer Electronics, Inc.
Product Exchange Center
32B Spur Drive
El Paso, Texas 79906
•
•
•
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
Insure your shipment in case of loss of damage. Thomson accepts no liability in case of damage or loss.
A new or refurbished unit will be shipped to you prepaid freight.
What your w arranty does not cover:
•
Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and user controls.
For additional information, ask your dealer.)
•
•
•
•
•
•
Installation and set-up service adjustments.
Batteries.
Damage from misuse or neglect.
Products which have been modified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you
should it ever be necessary. The return of the card is not required for warranty coverage.
How state law relates to this w arranty:
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If you purchased your product outside the USA:
•
•
This warranty does not apply. Contact your dealer for warranty information.
Model Number RP-9990
TBD
©1998 Thomson Consumer Electronics, Inc.
Trademark(s)® Registered
Printed in China
Mage(s) Registrada(s)
Marque(s)® déposée(s)
RP9990-3
4
10/10/00, 11:55 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|