5633 9330 (EN/E)
English
Before You Begin
Plugging In For Power
AC OUTLET POWER SUPPLY:
120V~60Hz
FCC Information
Safety Information
Important Information
•
Make sure that you keep your set
away from water and high
For Your Safety
Ecology
FCC Information
Technical Information
The AC power plug is polarized
(one blade is wider than the
other) and only fits into AC
power outlets one way. If the
plug will not go into the outlet
completely, turn the plug over
and try to insert it the other
way. If it still does not fit, contact a qualified
Note:
Help protect the environment - we
recommend that you dispose of used
batteries by putting them into specially
designed receptacles.
This device complies with Part 15 of the FCC
Product: Clock Radio with CD player
Brand: RCA
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la class B est
conforme à la norme de NMB-003 du Canada.
temperatures.
u s e r
m a n u a l
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
In accordance with FCC requirements, changes
or modifications not expressly approved by
Thomson Inc. could void the user’s authority to
operate this product.
Power is fed to the unit even
•
Do not use your system immediately
after transporting it from a cold place
to a warm place, as condensation may
cause the system to malfunction.
Keep your unit away from humid
areas and abnormally hot places.
To prevent personal injury, do not
reverse any batteries.
Model: RP5640
when it is not functioning. To cut
the power supply off, the power cable
must be unplugged.
Electrical Consumption
Battery Back-Up Operation
This clock radio is equipped with a
memory holding system that can be
powered with 2 “AA” batteries (included
and installed). The power failure
Power Supply: 120V ~ 60Hz
•
•
•
•
Maintenance
Power Consumption: 22 Watts
Clean the unit with a soft cloth, or a damp
chamois leather. Never use solvents.
electrician to change the outlet, or use
different one. Do not attempt to bypass this
safety feature.
a
IMPORTER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Power Failure Indicator
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
This device generates and uses radio frequency
(RF) energy, and if not installed and used
properly, this equipment may cause interference
to radio and television reception.
If this equipment does cause interference to
radio or television reception (which you can
determine by unplugging the unit), try to correct
the interference by one or more of the following
measures:
When AC power is interrupted (disconnected)
for a short period of time, both time and
alarm settings will change (unless battery is
installed). After AC power is restored
protection circuit will not operate unless
battery is installed. When normal
The use of apparatus in moderate
climates.
T H E L I G H T N I N G CAUTION: TO REDUCE THE
THE EXCLAMATION
FLASH AND ARROW-
RISK OF ELECTRIC SHOCK, POINT WITHIN THE
HEAD WITHIN THE
DO NOT REMOVE COVER T R I A N G L E I S
A
Precautions
TRIANGLE IS
WA R N I N G S I G N
ALERTING YOU OF
A
WARNING
SIGN
( O R B A C K ) . N O U S E R -
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO Q U A L I F I E D S E RV I C E
PERSONNEL.
For Your Records
household power is interrupted, or AC line
cord is unplugged, the batteries will
power the clock radio to keep track of
time and alarm settings programmed into
memory. When the battery backup
functions, the digital display will not light,
however, the function of alarm still occurs
during the power interruption if
The apparatus shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on the
apparatus.
No naked flame sources, such as
lighted candles, should be placed on
the apparatus.
ALERTING YOU OF
•
Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a
trained technician.
I
I
M
P
T
O
R
T
T
A
I
N
T
S
In the event that service should be required, you
may need the model number. In the space
below, record the date and place of purchase:
"
D
A
N
G
E
R
O
U
S
N
S
R
U
C
O
N
VOLTAGE" INSIDE
THE PRODUCT.
A C C O M PA N Y I N G
(reconnected), the Digital Display will blink to
indicate that power was interrupted and you
should readjust the time and alarm settings.
T
H
E
P
R
O
D
U
C
T.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
Main plug is used as the disconnect device, it shall
remain readily operable and should not be
obstructed during intended used. To be
completely disconnected the apparatus from
supply mains, the main plug of the apparatus
shall be disconnected from the mains socket
outlet completely.
Date of Purchase:
Place of Purchase:
WARNING:TO PREVENT FIRE OR ELECTRICAL
•
•
Warning: Never operate this product with
the cabinet removed.
DO NOT EXPOSETHIS PRODUCT
SHOCK HAZARD,
•
•
TO RAIN OR MOISTURE.
• Re-orient the receiving antenna (that is, the
antenna for the radio or television that is
“receiving” the interference).
The CD player of this unit uses a laser to
read the music on the disc. The laser
mechanism corresponds to the cartridge
and stylus of a record player. Although
this product incorporates a laser pick-up
lens, it is completely safe when operated
according to directions.
remaining battery power is adequate.
Normal operation will resume after AC
power is restored so you will not have to
reset the time or the alarm.
Attention should be drawn to the
environmental aspects of battery
disposal.
• Move the unit away from the equipment that
is receiving interference.
Service Information
IMPORTADOR
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
• Plug the unit into a different wall outlet so
that the unit and the equipment receiving
interference are on different branch circuits.
If these measures do not eliminate the
interference, please consult your dealer or an
experienced radio/television technician for
additional suggestions. Also, the Federal
Communications Commission has prepared a
helpful booklet, “How To Identify and Resolve
Radio TV Interference Problems.” This booklet
is available from the U.S. Government Printing
Office, Washington, DC 20402. Please specify
stock number 004-000-00345-4 when ordering
copies.
This product should be serviced only by those
specially trained in appropriate servicing
techniques. For instructions on how to obtain
service, refer to the warranty included in this
Guide.
•
•
Minimum distances (2cm) around the
apparatus for sufficient ventilations.
The ventilation should not be
impeded by covering the ventilation
opening with items, such as
newspaper, table-cloths, curtains, etc.
The rating plate is located at the
bottom cabinet of apparatus.
Replace batteries as follow:
•
•
Discs rotate at high speed inside the
player. Do not use damaged, warped or
cracked discs.
Do not touch the pick-up lens which is
located inside the disc compartment. Also,
to keep dust from collecting on the pick-
up lens, do not leave the compartment
door open for an extended period of time.
1. Remove battery compartment door
(located at the bottom of the radio)
by applying thumb pressure to the
tab on battery door and then lift the
door out and off the cabinet.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
•
EXPORTER
Thomson Inc.
P.O. Box 1976
2. Replace 2 AA batteries.
3. Replace the compartment door.
Indianapolis, IN 46206 - 1976
©2006 Thomson Inc.
RP5640
EN/E
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
Note: we recommend that you replace the
batteries every 2-3 years.
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not
as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications
without prior notice. The English version serves as the final reference on all product and operational details
should any discrepancies arise in other languages.
This product complies with DHHS rules 21CFR
subchapter J. appliable at date of manufacture.
It is important to read this instruction book prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.
Printed in China / Impreso en China
Radio
Using the Weather Band
Clock
Before You Plug for Power
General Controls
Radio
Clock
US Time Zones
Please refer to the actual unit when
reading the instructions below:
Tuning the Stations
TV Band
CH 2-13 are available for TV Band.
1. Press RADIO ON / BAND to access TV
Bands.
2. Press REV or FWD to select among the TV
channels.
3. TV and the corresponding channel
number will show on the display.
Automatic Radio Station
Search
AUDIO-IN - selects auxiliary audio input
mode.
3. Press REV or FWD to set the time. Press
and hold the respective buttons
to fast reverse or fast forward clock
time.
4. Clock time will automatically be
saved if no buttons are pressed after
a few seconds. You can also press SET
CLOCK/WAKE once to save your setting
and exit clock set mode.
Weather information is given continuously
from U.S. Government Weather Stations
on frequencies from 162.4MHz to
162.55MHz. The Weather transmission,
broadcast 24 hours a day, are taped
messages that are repeated every 4 to 6
minutes and revised and updated as
needed to match the changing weather
conditions. For additional information,
check your location office of the National
Weather Service (Department of
Commerce).
1. Press RADIO ON/BAND (located on
the front of the radio) to turn on the
radio.
1. Setting Time Zone
SLEEP - activates SLEEP function.
SET CLOCK / WAKE - sets clock time and
wake setting.
REV / FWD - change time / radio frequency /
CD track
1. Press RADIO ON/BAND (located on the
front of the radio) to turn on the radio.
2. Press and hold REV or FWD for 2
seconds, it will automatically search a
radio station for you.
You may slide the time zone selector at
the bottom of the unit to 1) Eastern,
2) Central, 3) Mountain or 4) Pacific. (refer
to the maps on the right)
Front View
2. Press RADIO ON/BAND repeatedly to
select the desired broadcast band.
3. Press REV or FWD to tune to your
desired radio station.
4. Press VOLUME + / - to adjust to your
desired listening level.
WAKE UP CD TRACK / STATION- sets the
wake up radio station or CD track.
- selects repeat 1 / repeat all / shuffle
/ repeat shuffle in CD mode.
- skips / searches backward.
- starts / pauses CD playback.
- skips / searches forward.
INSTANT WEATHER - recalls available
weather stations.
2. Day Light Saving
Selecting the Preset Radio
You can press and hold for a few seconds
the day light saving switch at the bottom
of the unit to turn on/ off in areas
observing/ not observing such time
change.
TV band: CH 2 - 59.75 MHz, CH 3 - 65.75
MHz, CH 4 - 71.75 MHz, CH 5 - 81.75 MHz, CH
6 - 87.75 MHz, CH 7 - 179.75 MHz, CH 8 -
185.75 MHz, CH 9 - 191.75 MHz, CH 10 -
197.75 MHz, CH 11 - 203.75 MHz, CH 12 -
209.75 MHz, CH 13 - 215.75 MHz
Stations
Bottom View
1
2
3
4
1. Press RADIO ON/BAND to turn on the
radio.
.
.
.
.
Setting the Preset Radio
- stops CD playback.
- slide to select different time zone.
Display
Auto Dimmer
Slide the AUTO DIMMER switch at the back
of the unit to the ON position. The brightness
of the LCD display will vary automatically
according to the environment.
OFF - turns off the radio / alarm / CD
RECALL - recalls available preset radio
stations.
MEMO/SET - sets and stores preset
memory in radio mode.
DAYLIGHT SAVING TIME - Press and hold for
a few seconds to turn on / off the Daylight
Saving function.
Battery compartment - see “Battery Back-up
Operation”.
Stations
4
1. Press INSTANT WEATHER to access
Weather Bands with strong signals to
the unit.
2. Press REV or FWD to select among the
7 weather channels.
2. Press RECALL repeatedly to select your
desired preset radio station.
3
1. Press RADIO ON/BAND to turn on the
radio.
WARNING: Please avoid playing with
these buttons after entering the
Clock/Alarm set mode.
2. Press RADIO ON/BAND to change the
broadcast band.
3. Press REV or FWD to tune to your
desired radio station.
4. If you want to memorize this radio
station, press MEMO/SET once, and
then press RECALL repeatedly to
choose the radio station number you
want to record in.
5. Press MEMO/SET again to confirm.
6. If you set the radio station in the AL
location, it will be the wake up radio
station of the alarm.
Antennas
2
1
Overwriting the Preset Radio
SNOOZE - turns off the alarm
momentarily.
FM antenna - The power cord acts as your FM
antenna. It picks up moderate to strong radio
stations and eliminates the need for an
external antenna in most strong signal areas.
Be sure the power cord is stretched to its full
length. Do not coil or bunch the cord
together. Changing position of the power
cord may improve reception.
Stations
3. Wx and the corresponding channel
number will show on the display.
Auto Clock Set
Canadian Time Zones
Back View
1. Press RADIO ON/BAND to turn on the
radio.
You do not have to set the clock time as a
built-in automatic time set system is
equipped in this clock powered by 3V (2
X AA batteries (included). All you have to
do is to plug this clock for power and
current time will be shown automatically.
However, the batteries can also be
VOLUME
VOLUME
- decreases volume.
- increases volume.
Slide to the OFF position, the display will
remain at its brightest level.
AUDIO-IN - auxiliary audio input jack.
COLOR SELECT - press to toggle among 4
backlight colors.
IMPORTANT:
2. Press REV or FWD to tune to your desired
preset radio station.
3. Press MEMO/SET once and then press
RECALL repeatedly to choose the radio
station number you want to overwrite.
4. Press MEMO/SET again to confirm.
RADIO ON/BAND - turns on the radio /
changes radio band.
The listening range of NOAA weather
stations varies from 10 miles up to a
maximum of 40 miles from the station’s
transmitter. In some areas of the United
States, weather transmissions cannot be
monitored. The effective range of this
radio will have side variations due to the
height of the local transmitting antenna,
atmospheric conditions, and the terrain
between the transmitter and your radio’s
location.
AUTO DIMMER - turns on / off the auto
dimmer function.
Backlight Color Select
You can choose among 4 different backlight
color - blue, green, white and amber.
1. Before a specific color is set, the backlight
color will keep changing.
Top View
OPEN / CLOSE - opens / closes the CD
compartment.
Listening to Auxiliary Source
1. Connect auxiliary input source (e.g. mp3
player) with a line-in cable (included) to
the AUDIO IN jack of the unit.
exhausted and we recommend that you
replace the batteries every 2-3 years. In
case the memory holding batteries are
accidentally removed, you may set the
clock manually with following procedures:
AM Antenna - A built-in ferrite rod antenna
eliminates the need for an outside antenna
for AM reception. Rotating the unit slightly
may improve reception of distant AM
stations.
WAKE 1 - activates/inactivates WAKE 1
setting, press repeatedly to cycle wake
2. Press Color Select at the back of the unit
to toggle among different backlight color.
3. If the AC power and backup batteries are
removed, the 4 backlight colors will
starting changing again once the AC
power is resumed.
Deleting the Preset Radio
Stations
2. Press AUDIO IN to select auxiliary input
mode with AUDIO-IN shows on the
display.
mode:
1. Press RECALL repeatedly to select your
preset radio station you want to delete.
2. Press and hold MEMO/SET for 3 seconds
to delete the selected preset radio
station.
WAKE 2 - activates/inactivates WAKE 2
setting, press repeatedly to cycle wake
1. Be sure Time Zone and Daylight Saving
Time is adjusted before operating the
clock.
2. Press SET CLOCK/WAKE repeatedly
until the clock setting icon is
displayed.
3. Adjust volume by pressing VOLUME
mode:
Weather band: CH 1 - 162.550 MHz, CH 2
- 162.400 MHz, CH 3 - 162.475 MHz, CH 4 -
162.425 MHz, CH 5 - 162.450 MHz, CH 6 -
162.500 MHz, CH 7 - 162.525 MHz
, control other playback operations
on the auxiliary unit.
NAP - sets the alarm to sound after a
specific period of time. (Alarm tone only)
2
1
4
3
incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning
damage.
Limited Warranty (United
States)
NAP & Sleep Function
CD Player
Listening to Compact Disc
1. Press OPEN/CLOSE to open the CD
compartment.
W
W
a
a
k
k
e
e
Function
Function
Wake Function
What your warranty covers:
Limitation of Warranty:
will be shown again,
will show on the
• Defects in materials or workmanship.
For how long after your purchase:
• One year from date of purchase.
The warranty period for rental units begins with
the first rental or 45 days from date of shipment to
the rental firm, whichever comes first.
What we will do:
• Provide you with a new, or at our option, a
refurbished unit. The exchange unit is under
warranty for the remainder of the original
product’s warranty period.
• Proof of purchase in the form of a bill of sale or
receipted invoice which is evidence that the
product is within the warranty period must be
presented to obtain warranty service. For rental
firms, proof of first rental is also required.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc.,
which were originally provided with the product.
We recommend using the original carton and
packing materials.
4. Press VOLUME + / - to adjust to your
desired wake up volume.
Waking to CD
Selecting Play Mode
NAP Mode
•
THE WARRANTY STATED ABOVE IS THE ONLY
Turning off Wake Function
1. Silence the alarm momentarily
Press SNOOZE. The alarm will sound again
when the snooze period is over. (see
“SmartSnoozeTM” section).
display, and the sleep time is set.
Press SLEEP to read the remaining
sleep time.
Tip:
WARRANTY APPLICABLE TO THIS PRODUCT. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL
OR WRITTEN INFORMATION GIVEN BY THOMSON
INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A
GUARANTY OR IN ANY WAY INCREASE THE SCOPE
OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. THOMSON INC. SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT OR
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED
WARRANTY ARE GOVERNED BY THE LAWS OF THE
STATE OF INDIANA. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR
When the waking to CD is selected,
icon will light.
1. Press
2. Set the wake time.
3. Press WAKE 1 or WAKE 2 to select
waking up by CD,
accordingly.
4. Press VOLUME + / - to adjust to your
desired wake up volume.
5. Press OFF to stop the CD playback.
/
1. Start CD playback.
For catnaps up to 2 hours without
disturbing the regular alarm settings, the
NAP function wakes you up after a short
period of time. Simply:
•
5. Press OFF to turn off the radio.
2. Press
to toggle between different
If you set the Wake function
with low volume level before
going to bed, we advise using Waking
to Alarm Tone mode to wake you up
since the volume will automatically
increase.
to turn on the CD.
2. Insert a disc, press OPEN/CLOSE to
close the CD compartment door.
play modes.
You can select your wake up radio station by
the following procedures.
Sleep to Radio
1. Under sleep mode, press RADIO ON /
BAND to turn on the radio.
2. Sleep radio station will automatically
switch to the current radio station, you
may select the radio station as usual.
3. Once the sleep time is reached, the radio
will turn off automatically.
You can reset to sleep to a different radio
station, simply:
1. Press RADIO ON/BAND.
2. Press REV or FWD to tune to the radio
station you want to sleep to.
3. Press
.
1. Press NAP, the NAP indicator will flash.
While the NAP indicator is flashing,
press REV or FWD to adjust nap time.
The time range is from 10 minutes to 2
hours at 10 minutes interval (default is
20 minutes).
2. Wait 3 seconds or press NAP again to
confirm, the NAP indicator will show
on the display.
- repeats the current track.
- repeats the whole disc.
- plays tracks randomly.
1. Press RADIO ON/BAND to turn on the
radio and select the band.
/
will light
4. Press VOLUME + / - to adjust to your
desired listening level.
2. Stop the alarm
Press OFF and the alarm will be on again the
following day at the same time.
2. Press REV or FWD to tune to your desired
radio station.
3. Press and hold WAKE UP CD TRACK /
STATION to store the current radio station
5. Press
forward the CD track.
6. Press and hold or
or
to skip backward or
- plays random track repeatedly.
to search
3. Disable the alarm permanently
Press WAKE 1 or WAKE 2 repeatedly
until no corresponding wake indicator
SmartSnoozeTM
backward or forward within the CD
track.
7. Press to stop CD playback.
•
as the wake up radio station.
will
This operation allows extra sleep time
after the wake function is on. The alarm
You can select your CD wake up track by
the following procedures.
1. In CD mode, while pressing WAKE UP
CD TRACK / STATION, press REV or
FWD to select your desired CD wake
up track.
2. Release WAKE UP CD TRACK /
STATION, and the CD wake up track is
set.
3. To reset the CD wake up track, follow
the above procedures and set the CD
wake up track to 1.
show on the display.
(e.g.
/
/
) shows on the display.
Note: “AL” refers to the Alarm Station. If no
WAKE STATION is set, the wake up radio
station will stay at your last listening radio
station.
will be off by pressing SNOOZE, SLEEP,
AUDIO-IN, NAP, WAKE 1, WAKE 2,
3. Press NAP once to show time left, after
3 seconds, the display will return to
clock time.
•
To activate the wake function again, press
WAKE 1 or WAKE 2 repeatedly until a
desired wake mode indicator shows on
the display. The previously set wake time
remains unchanged.
SET, INSTANT WEATHER or OPEN/
CLOSE until the snooze period is over.
Snooze function can be used repeatedly
up to 30 minutes (default: 9 minutes).
After this, the wake function will turn off
until the next day.
Wake Function
Note:
• Include evidence of purchase date such as the bill
of sale. Also print your name and address and a
description of the defect. Send via standard UPS
or its equivalent to:
•
•
•
Only alarm tone can be selected in
NAP mode.
A
PARTICULAR PURPOSE ON THIS PRODUCT IS
You can cancel your wake up radio station by
the following procedures.
1. Press RADIO ON/BAND to turn on the
radio.
2. Press RECALL repeatedly to select the
wake up radio station.
3. Press and hold MEMO/SET to cancel the
wake up radio station.
Sleep to CD
1. Under sleep mode, press
playback.
2. CD play mode will be automatically in
Repeat All mode when using Sleep to CD
setting.
3. The unit will turn off automatically once
the sleep time is reached.
Setting the Wake Time
1. Press SET CLOCK/WAKE repeatedly
WAKE 1
Selecting Wake Mode
LIMITED TO THE APPLICABLE WARRANTY PERIOD SET
FORTH ABOVE.
to start CD
When the NAP alarm sounds, you can
press OFF to stop it.
Press and hold NAP for 5 seconds or
select NAP time to 0 minutes to cancel
the NAP function.
To change to another wake mode (e.g. from
CD to radio), simply press WAKE 1 or WAKE
2 repeatedly to scroll through wake options.
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
How state law relates to this warranty:
until
or WAKE 2 icon shows on
Set the “quiet” period as follow:
• Some states do not allow the exclusion nor limitation
of incidental or consequential damages, or limitations
on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
• This warranty gives you specific legal rights, and you
also may have other rights that vary from state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for
warranty information.
the display.
2. Press REV or FWD to set the wake
time. The time decrements or
increments will follow by a faster rate
when you press and hold either REV or
FWD.
3. Press SET CLOCK/WAKE repeatedly to
exit setting wake time mode. Or else
the unit will exit setting wake time
mode when no button is pressed
within 5 seconds.
• Insure your shipment for of loss or damage.
Thomson accepts no liability in case of damage or
loss en route to Thomson.
• Pay any charges billed to you by the Exchange
Center for service not covered by the warranty.
• A new or refurbished unit will be shipped to you
freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual
provides information regarding operating
Instructions and user controls. For additional
information, ask your dealer.)
While pressing SNOOZE, press REV or
FWD to set the “quiet” period (the
default time is 9 minutes) from 1 minute
to 30 minutes. Release SNOOZE, then the
“quiet” period is set.
Note: If the CD compartment is empty,
the alarm tone will sound instead even
the WAKE TO CD mode is selected.
Waking to Alarm Tone
When waking to alarm tone is selected,
Sleep Mode
/
In sleep mode, the radio and CD will turn
off automatically. To set the sleep time,
simply:
icon will light.
You cannot adjust the alarm tone with
volume.
Waking to RADIO
When the waking to radio is selected,
icon will light.
1. Press RADIO ON/BAND to turn on the
Note:
Note: Whenever the unit is in wake up
setting mode and wake up on mode, the
backlight color will changed into red,
regardless of the previously set backlight
color.
/
•
If you decide to turn off the unit sooner,
1. Press SLEEP, then the time display will
exhibit 0:59 and the radio will turn on
(default). While holding SLEEP, press
REV or FWD to set the sleep time. The
time range is from 1 minute to 2 hours
(default is 0:59).
•
•
When the AC power is disconnected, the
press SNOOZE or OFF.
unit will enter DC backup mode, all wake
mode will be reverted to alarm tone.
The unit equips with GRAD-U-WAKE
feature, the alarm tone volume will
increase gradually to its maximum in
about 30 to 45 seconds.
•
The unit will enter either CD or Radio
mode after SLEEP is pressed, depending
on the previous sleep setting.
radio.
2. Set the wake time .
3. Press WAKE 1 or WAKE 2 to select
waking up by RADIO
accordingly.
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
•
When the sleep mode is activated again,
the sleep time will be the same as the
one you have set before.
/
will light
2. Release SLEEP and the current time
• Products which have been modified or
Download from Www.Somanuals.com. All Manuals Search And Download.
|