IP Phone
IP120
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Getting Started
Packing List
Assembling IP120
Configuration and Registration
Basic Configuration via Web Page
Account Settings
Basic Configuration using phone keypad 9
Overview
LEDs
Icons
User Interface
User levels
Administrator Mode
Reboot
Customizing Your Phone
General Settings
Phone Status
Time and Date
Keypad Lock
Audio Settings
Volume
Ring Tones
Codec Selection
Contact Management
Edit/Add/Delete Contacts
Basic Call Functions
Outgoing calls
Call Devices
Call Methods
Send Key configuration
Hot Line
Anonymous call
Dial Plan
Incoming calls
DND
5
5
6
7
7
8
Call log
30
30
30
30
30
31
31
31
31
31
32
32
33
33
33
33
34
34
35
35
35
36
36
36
Accessing Call log
Accessing Missed Calls list
Accessing Dial Calls list
Call list items management
During an Active Call
Mute
11
Call Hold
Call Waiting
12
12
13
15
15
16
16
16
16
17
17
18
18
18
19
20
21
23
23
23
23
24
24
25
26
27
28
28
29
Handling a waiting call
Call Waiting Configuration
Call Transfer
3-way Conference
Voicemail
Voicemail settings
Retrieving your Voicemail messages
Advanced Functions
Account Setting
Network Settings
Advanced Network Settings
VLAN
HTTPS
802.1X
Reset to Factory Settings
Firmware Update and Autoprovisioning 37
Decryption
Keys configuration
Send Key configuration
Programmable keys
Line keys Configuration
Line
Speed Dial
Confernce
Transfer
Hold
DND
Call Return
37
38
39
39
40
40
41
41
41
42
42
42
Call Forward
Auto Answer
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Pick Up
Call Park
Voice Mail
Prefix
Redial
Trouble shooting
Appendix A.
Line Key configuration menu
Memory Key configuration menu
Service
42
43
43
43
43
44
46
46
47
48
49
Warranty
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Packing List
Line
3
The following components are included:
IP120
IP120
Handset & Handset Cord
AC Adaptor
Ethernet Cable
Instruction Booklet
o
Assembling the IP120
This section introduces how to assemble the phone with the components in the
packing list.
Connecting the Handset;
Connecting Network and Power.
Connecting the Handset and Headset,
as shown to the side:
Note: A headset is not provided.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Network and Power
Plug the IP120 to the AC Power directly using the power adapter (included) and the
phone will start up automatically.
The IP120 can also share the network connection with other network devices such
as PCs. Connect the phone’s PC port and computer’s network port together using an
Ethernet cable.
Power Socket
PC
Network Socket
Headset
Handset
Press here to release stand
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration and Registration
Some simple configurations are needed to get the phone ready for making calls.
First, users must enter the network and account information into the phone.
Parts of the set up process may require knowledge of the local area network con-
figuration. Please contact the network administrator or internet service provider
for more details.
Telephone Features and VoIP Service Providers
Not all phone features are available with all VoIP service providers. Please make
sure all features are properly configured with the service provider before installing
the IP120.
Basic Configuration via Web Interface
TThe IP120 features an embedded web interface to help administrators and users configure,
manage and use their phone in an intuitive and simple manner. The phone’s web server can
be accessed with any web browser.
Press the phone’s OK button while it is idle to enter the status page and find out the IP ad-
web browser. The default administrator’s login name and password are admin/admin
Note: The PC accessing the web interface must be operating on the same network segment
as the IP120 to be able to access the web configuration page. Please consult the network
administrator for help.
Network Settings
Choose NETWORK[INTERNET PORT (WAN) Settings.
DHCP: By default the phone attempts to contact a DHCP Server in the network in order to
obtain its valid network settings, e.g. IP address, subnet mask, gateway, DNS server, etc.
Static IP Address: If the phone cannot contact a DHCP Server for any reason, the network
settings must be entered manually via Static IP Address. Please contact the network admin-
istrator for more details.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Using the wrong network parameters may result in the phone failing to con-
nect to the service provider and may also have an impact on network performance.
Please contact the network administrator.
Account Settings
The phone will automatically register to the service provider’s server using the
account data provided by automatic or manual provisioning.
While using the web interface, choose ACCOUNT [ ACCOUNT SETTINGS. Select
Account to Account 1. Enter the following parameters:
Field
Account Active
Label
Description
This will enable or disable the account.
The name that shows on the screen.
Display Name
What the phone will display on the other phone’s Caller ID.
This may be overridden by data at the service provider.
Register name, provided by the service provider.
User name, provided by the service provider.
User password provided by the service provider.
SIP server address provided by the service provider.
SIP server port provided by the service provider. The
default is 5060.
Register Name
User Name
User Password
SIP Server
SIP Server Port
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill the fields and press the SAVE button.
The phone will try to register to the SIP service provider.
If no accounts are successfully registered, the phone will display “No Service” on
the screen.
Note: Should the IP PBX, SIP Server or Service Provider require an authentication, a
correct password is needed. This must be entered via the web user interface.
Basic Configuration using phone keypad
There are three user types programmed into the phone, each one giving a dif-
ferent level of access to settings. These user types are “user”, “var” and “admin.”
Admin privileges are needed to change certain configurations. By default the
phone will be in user mode.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing phone to admin mode: Press MENU[7. Press the right navigation key
until the user type reads “admin” on the screen. Then press the down key to be
prompted for the password. The password is “admin” by default. Type this in using
the dial pad and press OK or Save.
Network Settings: Press MENU[3. SETTINGS[2 .ADVANCED[OK. Enter the
admin password, and choose 2. NETWORK[1.WAN PORT, 2.VLAN, 3.WEB TYPE or
4.802.1X Settings to change the network configurations.
Account Settings: Press MENU[3.SETTINGS[2.ADVANCED[OK. Enter the admin
password, and choose 1. ACCOUNTS[OK to configure the account settings.
From here, you can enter the following parameters:
Field
Activation
Label
Description
This will enable or disable the account.
The name showing on the screen.
Display Name
What the phone will display on the other phone’s
Caller ID. This may be overridden by data at the
service provider.
Register Name
User Name
Password
Register name provided by the service provider.
User name provided by the service provider.
Account password provided by the service provider.
SIP server address provided by the service provider.
SIP Server
Press the UP and DOWN navigation keys to scroll through the parameter list and
fill in proper information. Press the OK button or the Save soft key to confirm.
Note: The active User Type is shown with an * on the left of display when the user
enters MENU[7. User Type menu, like this:
Once finished with all admin related tasks, change back to User mode with the
same procedure.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
3 Lines
Soft Keys
Mute/Cancel
Volume Up
Volume Down
Speaker
Voicemail
Redial
Headset
Hot Key/Call Log
11
Download from Www.Somanuals.com. All Manuals Search And Download.
LEDs
Table 1 Line Keys
LED Status
Steady blue
Description
The account is active
Blinking blue
There is an incoming call to the account there is a call
on hold
Off
The phone is in idle status or this account is not provisioned
Table 2 Power Indication LED
LED Status
Steady blue
Blinking orange
Description
New messages or new missed calls
When there is an incoming call, when a call is muted
or when the network is not available
In Idle mode
Off
Icons
The IP120 displays different kinds of icons on its LCD. Refer to the following table
for their meanings:
Icon
Description
Account registering
Account registration succeeded
Account registration failed
In handset mode
Handsfree mode activated
In headset mode
Call muted
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Icon
Description
New missed calls
Incoming call
Outgoing call
Call forwarding activated
Do not disturb function activated
Auto answer activated
Voicemail
Call on hold
Flashes when internet is disconnected
Keypad Lock
User Interface
There are two ways to customize specific options on the phone:
• Using the keypad and display on the phone.
• Using the web user interface in an internet browser. Please refer to the “Con-
figuration and Registration” section for more information on the web interface.
In many instances, it is possible to use either the phone user interface or the web
interface to operate the phone and change settings. Some operations, however,
are only possible via phone or web user interface. Please refer to the following
table for differences:
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONE OPTIONS
PHONE UI
WEB UI
Status
IP
MAC
Firmware
Network
Phone
Accounts
4
4
4
4
4
4
4
4
4
4
4
Call Features
Call Forward
Call Waiting
Function Keys
End of dialing key
Hot Line
Anonym Call
DND
Logs Setting
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Basic Phone Functions
Time & Date
Ring Tone
4
4
4
4
4
Phone Volume
Advanced Phone Functions
Accounts
Network
Reset Factory
Keypad Lock
Set Password
Set AES Key
4
4
4
4
4
4
4
4
4
4
4
4
4
Auto Provision
Other Features
Messages
History
Directory
User Mode
4
4
4
4
4
4
Note: 1) The table above indicates most of phone functions, but not all of them. Please refer to next
sections for more details.
2) Some functions are password protected. In this case when prompted for a password make sure to use
one in accordance with active User Type
The default administrator username is admin, the default password is admin.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance Tasks
User levels
The IP120 allows three modes to configure the phone:
• User Mode (username : user, password : user)
• VAR mode (username : var, password : var)
• Administrator Mode (username : admin, password : admin)
Administrator mode grants unlimited access to the phone configuration on both
the web and phone interface. User Mode is not able to access the settings on the
phone interface such as: Accounts, Network, Reset to Factory, and other advance
phone settings. VAR mode grants access to subset of Administrator functions.
Administrator Mode
The default administrator password is admin.
To change the administrator password via the phone interface:
1) Make sure active User Type is admin
2) Press the Menu soft key[3.SETTINGS[2.ADVANCED
3) The user will be prompted to enter the current password.
4) Scroll to the Set Password option, then press the OK button or the Enter soft
key.
5) Enter the current password, press the DOWN navigation key, then the new pass-
word. Finally, press the DOWN navigation key to re-confirm the new password.
6) Press the OK button or the Save soft key to confirm the change, or the Back soft
key to return to previous menu.
To change the administrator password via the web interface:
Go to SECURITY[PASSWORD
The default username: password for the web interface is admin:admin.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Reboot
Users should reboot the phone when prompted. The phone may prompt a reboot
after applying specific changes to phone configuration.
To reboot via Web interface:
1) Go to SYSTEM[UPGRADE.
2) Click REBOOT button.
Note: Please do not power off during reboot, or it may cause a flash memory error.
Customizing The Phone
General Settings
Phone Status
Users can view the status of the phone using the phone interface or the web interface.
This option allows users to review:
• IP
• MAC (Machine Access Control) address
• Firmware
• Network: MAC, LAN, Netmask, Gateway, DNS, etc
• Phone: Model, Hardware, Firmware, Product ID and MAC
Status
1. IP: 192.168.0.120
2. MAC: 30c6be00011a
3: Firmware: 1.0.2683
• Accounts: The status of the 3 SIP accounts
To check the Phone Status via phone interface:
Press the OK button to check the IP, MAC address and Firmware version.
BACK
Use the navigation keys to check the other information.
To view the Phone Status via web interface:
Open a web browser and input the IP Address of the phone. Enter login and pass-
word (default login and password are admin and admin).
Select STATUS [HARDWARE STATUS.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Time and Date
Time and date are displayed on the IP120 idle screen. By default the date and time
of the phone are configured manually, but users can set the phone to obtain them
from a preconfigured SNTP server if desired. Please contact the network adminis-
trator if the time or date is incorrect.
To change Time and Date via the phone interface:
Press the Menu soft key [3.SETTINGS[
1.BASIC-[1.TIME & DATE[OK.
If SNTP is chosen, the phone will automatically get the time from an NTP Server.
Use the UP and DOWN navigation keys to highlight the specific options and
change parameters. Users can set Time Zone and NTP Server respectively. By de-
fault GMT-5 is configured.
If Manual is chosen, the time can be set manually. Use the
UP and DOWN navigation keys to highlight the option and
enter the specific date and time.
Press the OK button or the Save soft key to save the changes.
Or press the Back soft key to return to the previous screen.
To set time format via the phone interface:
Press the Menu soft key[3.SETTINGS[1.BASIC[
1.TIME & DATE[3.FORMAT[OK.
Use the LEFT or RIGHT navigation keys to choose a preferred time format: 12 hour or 24 hour.
Press the OK button or the Save soft key to save the changes and return to the previous
screen.
Note: By default date and time setting is set to “Manual”.
Keypad Lock
Users can lock the menu key of their phone to protect it from unauthorized use.
When the MENU Key is locked, a password will be required to access phone settings.
To enable the lock via Phone interface:
Press Menu soft key [3.SETTINGS[2.ADVANCED, enter the password of current
user type, and then press OK button.
Scroll down to Keypad Lock and press OK.
Use the left or right navigation keys to change to “Menu Key”.
Press OK button to active the change, or Back soft key to return to the previous
screen.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
The icon
will be displayed on the top row of the idle screen.
To unlock the phone via Phone interface:
Press Menu soft key, enter the password of current user type, and then press OK
button. This will disable the keylock and allow acces to the phone menu.
To enable keypad lock via Web interface:
Choose Phone Preference web page to change the Keyboard lock option.
Audio Settings
Volume
Handset, speaker, headset and ringer volumes can be adjusted independently.
To adjust the volume in idle mode:
Press MENU[3. SETTINGS[1. BASIC.
Scroll to 3.Phone Volume, and press the OK button or the Enter soft key. Select
which item to adjust and use VOLUME UP and VOLUME DOWN or LEFT and RIGHT
navigation keys to increase or decrease the volume.
Press the OK button to save the changes or press the Back soft key to cancel.
To adjust the ring volume users can also press VOLUME UP and VOLUME DOWN
when the phone is in idle status.
To adjust the voice volume when on an active call press the VOLUME UP or VOL-
UME DOWN button during the call. This applies to Handset, Speaker and Headset modes.
Note: The volume can only be adjusted via the phone interface.
Ring Tones
The IP120 has seven unique ring tones.
To select Ring Tone Type via the phone interface:
Press the Menu soft key[3. SETTINGS[1. BASIC[OK.
Scroll to 2. RING TONE, and press the OK button or Enter soft key.
Use the UP and DOWN navigation keys to highlight a selection. The ring tone will
be played.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Codec Selection
The IP120 supports the following voice codecs:
• PCM a-law , PCM u-law, G.729, G.722, G.726, iLBC, iLBD-20
Users can enable/disable the desired codecs via the web interface. Please contact
the Network Administrator for more details about the codecs.
To enable or disable the codecs via the web interface:
Choose ACCOUNT[ACCOUNT SETTINGS (ACCOUNT 1/ACCOUNT2/ACCOUNT3)
Select the desired codecs in the Codecs section.
Click the SAVE button to save the changes.
PCM U-LAW
PCM A-LAW
Note: Codec Selection can only be done via the web interface.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Management
Edit/Add/Delete Contacts
The IP120 features a 300-entry local phonebook and 11 additional speed dial keys.
With the local directory users can:
• add,
• edit,
• delete,
• dial,
• search for a contact in this directory.
• create groups of contacts
The Phonebook also includes a Directory and a Blacklist.
To add a contact via the phone interface:
Press the Dir soft key [ 1. LOCAL DIRECTORY or
Press the Menu soft key [6. DIRECTORY[ 1. LOCAL DIRECTORY.
Press the OK button to enter into the Contacts list, press the Add soft key. From
here, enter a Name, press the DOWN navigation key to enter the Office, Mobile, or
Other phone number of the contact via the keypad.
Press the DOWN navigation key to set a special ring tone for the contact.
If users want to assign this contact to a group, use the DOWN navigation key to
select the group.
Press the Save soft key to add the contact, or the Back soft key to cancel the change.
To add a Group via the phone interface:
Press the Dir soft key [ 1. LOCAL DIRECTORY or
Press the Menu soft key [6. DIRECTORY[ 1. LOCAL DIRECTORY.
Press the Group soft key to enter to the Add Group page.
Enter the group name and press the DOWN navigation
key to choose an associated ring tone.
Press the OK button or the Save soft key to save.
To configure the speed dial keys via the phone Interface:
Press the Menu soft key[2. FEATURES[3.FUNCTION Keys[2.MEMORY Keys
Use the UP and DOWN navigation keys to select the key on which to store a con-
tact number, press the Enter soft key.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the RIGHT and LEFT navigation keys to select Speed Dial, then use the UP and
DOWN navigation keys to select Account, use the LEFT or RIGHT navigation keys to
assign this speed dial keys to a specific account
Then use the UP and DOWN navigation keys to select Value, enter the desired num-
ber and press the Save soft key or the OK button to confirm.
To use a Speed Dial button, press and hold the button for 2 seconds while in idle
mode or during a conversation to initiate a multi-party call.
To edit or delete a contact via the phone interface:
Press the Dir soft key [ 1. LOCAL DIRECTORY or
Press the Menu soft key [6. DIRECTORY [ 1. LOCAL DIRECTORY
Use the UP or DOWN navigation keys to highlight the contact list (e.g. 1.Contacts)
and press the Enter soft key or the OK button.
Use the UP or DOWN navigation keys to highlight the
contact to edit or delete, then press the Option soft key,
select the Detail or Delete soft key.
Make the desired changes, press the Save soft key or the OK button to confirm, or
press the Back soft key to return to previous menu.
To move a contact to the Blacklist via the phone interface:
If users add a contact to the blacklist the phone will automatically reject all calls
from this contact.
Press the Dir soft key [ 1. LOCAL DIRECTORY or
Press the Menu soft key [6. DIRECTORY [1. LOCAL DIRECTORY
Use the UP or DOWN navigation keys to highlight the contact list (e.g. 1.Contacts)
and press the OK button or the Save soft key.
Use the UP and DOWN navigation keys to highlight the
contact to move to blacklist, then press the OPTION
soft key and then select 3. Move to Black List.
Press the OK soft key, or press the Cancel soft key to return to previous menu.
A warning message will ask for confirmation to move the contact.
Press the OK soft key to confirm the operation, or press the Cancel soft key to
return to the directory.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Manage Blacklist via the web interface
Choose CONTACT [ BLACK LIST
To move a contact from Call Log to Contacts via the phone interface:
Press the Menu soft key [5. HISTORY
Use the navigation keys to highlight a record, then press the Option soft key.
Select 2 .Add to Contacts.
To add, delete or edit the Contact list via the web interface:
Choose CONTACT [ LOCAL PHONE BOOK
To search a contact via the phone interface:
Press the Dir soft key [ 1. LOCAL DIRECTORY or
Press the Menu soft key [6. DIRECTORY [ 1. LOCAL DIRECTORY
Press the Search soft key
Enter the contact name to be searched and press the OK button or the Save soft
key. Contact list will be searched for matching records, which will be displayed.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Call Functions
Outgoing calls
Call Devices
You can make a phone call via the following devices:
Pick up the handset,
icon will be shown on the screen.
Press the SPEAKER button, and the
icon will be shown on the idle screen.
Press HEADSET button if the headset is connected to the Headset Port. The
icon will be shown on the idle screen. This is a toggle key. Pressing it again will
unselect headset as the audio device.
Note: There are two ways to begin a call
1) Users can dial the number first, and then choose the device they wish to use for
the call.
2) Users can select the device first, and then enter the number to be called. If the
dial plan feature is disabled, the call will start automatically after 5 seconds. Users
can also press the OK button to start the call immediately.
3) In headset mode, press a line key to get a dial tone.
Call Methods
From the phone interface:
There are several ways to initiate a call:
1. Press an available line button and dial the number to call, or
2. Dial a number and select the audio device, or
3. Go to the Local Directory and use the navigation keys to select the desired
contact, or
4. Enter the call history interface, then use the navigation keys to make a
selection, or
5. Press a Line key which has been set as speed dial button, or
6. Press and hold a number key on the keypad that has been set as a speed dial key.
To terminate a call:
1. Press the Cancel soft key or
2. In handset mode, replace the handset on hook or
3. If in Speaker mode, press the SPEAKER button.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
End of dialing key configuration
Admin can set a specific button (“#” or “*”) as the send key. If this feature is
enabled, once a number is dialed, users can press this send key to dial the number
immediately.
To set the send key via the phone interface:
1) Make sure active User Type is admin or var
2) Press Menu soft key [ 2.FEATURES [ 4. END OF
DIALING Key to enter the configuration page.
3) Press the LEFT of RIGHT navigation keys to choose a button to use as the send
key: “#”, “*”, or disable this option.
4) Press the Save soft key or the OK button to save the changes, or the Back soft
key to discard the changes.
To set the send key via the web interface:
Go to PHONE [ FEATURES (General Information)
Hot Line
The Hot Line feature allows the phone to dial a number automatically if it has
been off hook for a specified time period and no keys have been pressed. Both
destination number and timeout can be configured.
The service is enabled if a Hot Line Number has been configured.
To set the Hot Line number via the phone interface:
Press the Menu soft key [2. FEATURES [
5. HOT LINE to enter the configuration page.
( if the active user type is user , press
Menu soft key [2. FEATURES [ 3. Hot Line )
Enter the hot line number and press UP or DOWN navigation keys to select the
Hot Line Delay. Set the Hot Line Delay (default is 4 seconds), then press the OK
button or the Save soft key to save the changes.
To set the Hot Line via the web interface:
Go to PHONE [ FEATURES (General Information)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Anonymous call
Anonymous call, also known as Caller ID restriction, allows callers to request the
network to hide their Caller ID identity when outgoing calls are dialed.
The IP120 supports Permanent Caller ID restriction, meaning that while enabled all
calls will request to be anonymous and callers need to disable if they want their
identity to be transmitted. This service can be performed locally, or by sending
an activation code to the network. This feature may be overridden by the service
provider. Additionally the IP120 allows users to automatically reject anonymous
incoming calls. These services can be managed through both phone and web interfaces.
To set Anonymous call via the phone interface:
( if the active user type is user , press
Menu soft key -> 2. Features -> 4. Anonym Call )
1) Press the Menu soft key [ 2. FEATURES [
6. ANONYM CALL to enter the configuration page.
2) Use the LEFT or RIGHT navigation keys to select
the Line to be anonymous.
3) Press the DOWN navigation key to display Block CID, then press the LEFT or
RIGHT navigation keys to enable or disable the anonymous call function.
4) To set this function locally, press the OK button or the Save soft key to save
the changes.
5) If the active user type is admin, to activate this function in your service provider
please press the DOWN key and enter the Anonym On Code and Anonym Off Code.
Whenever users enable or disable the anonymous call function on their phone, it
will automatically send these codes to the server.
6) Press the OK button or the Save soft key to save the changes, or the Back soft
key to cancel.
To set Anonymous call rejection using the phone interface:
1) Enter the Anonymous call menu as explained above
2) Press the UP or DOWN navigation keys to enter the 5. Rejection page
3)PressRIGHTorLEFTnavigationkeystoenableordisableAnonymousCallRejectionfunction.
4) If users would like to use the service provider to get this service, they must
press the DOWN key and enter the Reject On Code and Reject Off Code. Whenever
they enable or disable the Rejection option on their phone, it will automatically
send these codes to the server.
5) Press the OK button or Save soft key to save the changes, or the Back soft key to cancel.
Note: To manage Anonymous Calls and Rejection codes users need to have admin or
var rights. Check active User Type before attempting to configure using the phone
interface.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
To set Anonymous Call Services using the web interface:
Go to ACCOUNT [ACCOUNT SETTINGS (Basic)
Dial Plan
A dial plan establishes the expected number and pattern of digits for a telephone
number. This includes country codes, access codes, area codes and all combina-
tions of dialed digits.
Dial plans can be used for least-cost routing, dialing convenience or to prevent
users from calling specific numbers or groups of numbers.
Dial plans require admin or var privilege.
To configure the dial plans through the web interface, choose
PHONE [ DIAL PLANS.
The entire dial plan is enclosed in brackets (). Each dial plan is pipe separated (|).
The dial plan can include 0 to 9 inclusive, * and #. x represents any digit from 0 to
9. Repetition (i.e. x.) represents any digit (x) repeated 0 or more times. Big letter
T means to dial the numbers immediately after the dial plan sequence is matched
(e.g. 1234T). Square brackets [] are for digit matching. For example, [578]xxx will
match any four digit sequence starting with either 5, 7 or 8. [5-8]xxx will match
any four digit sequence starting with 5, 6, 7 or 8.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Here is a dial plan example:
(111T|[0-4] xxxxxxxxT)
Explanation:
111T This will dial 111 immediately after you entering the third digit.
[0-4]xxxxxxxxT Any 9-digit number starting with 0,1,2,3 or 4 will be dialed out
immediately after entering the 9th digit.
To create a Dial Plan in the web interface, use the following fields:
• Dial Plan: Enter the dial plan here.
• DP Enable: To enable or disable the dial plan.
• Dial Plan tmo: Timeout before the dial plan converts the calling number
(if enabled).
• Dial End tmo: Timeout before the phone makes the call after the last
digit of calling number is entered.
• Dial End tmo Enable: To enable or disable the Dial End Timeout.
• Hook Off tmo: Timeout for the phone to go back to idle mode after
the handset is off the hook.
• Hook Off tmo Enable: To enable or disable the Hook Off Timeout.
Incoming calls
Answering an incoming call
1) Lift the handset, or press the SPEAKER button to answer using the speaker-
phone, or press the HEADSET button to answer using the headset.
2) When already talking on the phone, press the corresponding line key or the OK
button to answer the new call.
During an active call, users can alternate between Headset, Handset and Speaker
phone by pressing the corresponding buttons or picking up the handset.
Rejecting an incoming call
Press the MUTE/CANCEL button to reject an incoming call.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DND
When the DND function is enabled, the icon shows and all incoming calls will be
rejected. Users can find a record of rejected calls in the incoming call record in
the Call History.
When the DND soft key is pressed in idle mode, the DND function is activated or
deactivated.
To configure the DND function via Phone interface:
1) Press the Menu soft key [2. FEATURES[5. DND to enter the configuration interface.
2) Use the RIGHT or LEFT navigation keys to enable or disable the feature.
3) Press the OK button or the Save soft key to save the changes.
4) Choose DND option again or press the DND button to deactivate DND mode.
Admin type users can also activate or deactivate DND function using DND
Codes if the service provider has this function:
1) Press the Menu soft key[2. FEATURES[7. DND to enter the configuration
interface.
2) Set the DND On Code and the DND Off Code by pressing the UP or DOWN navi-
gation keys, then press the OK button or Save soft key to save the changes.
3) When users select to enable or disable the DND function on the phone, it will
send these codes to the server, and the server will turn on/off the DND function.
In this case, any calls addressed to the phone’s extension will be rejected by the
server automatically, and will not be included in the Call History.
Note: When DND is locally enabled, the corresponding icon will be shown on the
display.
CALL FORWARD
This feature allows users to divert an incoming call to another phone number, such
as a cell phone or voice mailbox.
The following call forwarding parameters can be configured:
•Always: Incoming calls are immediately forwarded.
• Busy: Incoming calls are immediately forwarded when the phone is busy.
• No Answer: Incoming calls are forwarded when the phone is not
answered after a specific time period.
To configure CALL FORWARD via Phone interface:
1) Press the Menu soft key[2. FEATURES[
1. CALL FORWARD.
Users can also press the DOWN navigation button to enable or disable call forward
when the phone is in idle mode.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2) There are 3 options: Always, Busy and No Answer.
3) Make a selection and press the OK button or Enter soft key. Choose to activate
or deactivate the feature, then press the DOWN navigation key to enter the phone
number to which calls will be forwarded. For the No Answer feature, users can
also select the No Answer Timeout by pressing the DOWN navigation button.
4) To have the server perform this function, enter the On Code and Off Code op-
tions. When users choose to enable the call forward function via their phone, it
will send the corresponding code to the server, which will take care of forwarding
all calls. In this case, forwarded calls will not be stored in the Call History.
5) Press the OK button or the Enter soft key to save the changes.
Notes: 1. If the FWD soft key is pressed during ringing, the call will be dynamically
forwarded to the desired number.
2. Users can quickly enable or disable the Call Forward feature by pressing the
DOWN navigation button from idle mode. This will activate or deactivate the Al-
ways Call Forward feature.
3. Only admin/var can set the On and Off codes. Make sure the correct User Type is active.
4. When call forwarding is enabled, the
icon will be shown on the display
5.The3CallForwardtypeshavedifferentpriorities:Always>Busy>NoAnswer. Ifmorethan
onetypeofcallforwardisenabled,onlytheenabledsettingwithhighestpriorityiseffective.
6. FWD TO ... “ message will be displayed on idle screen after an incoming call was forwarded .
Pressing the OK button will clear this message. “
To configure Call Forward via the web interface:
Go to PHONE [ FEATURES (Forward)
Auto Answer
Auto answer allows an incoming call to be answered without requiring any action
by the user. This function is set on a per account basis.
This function can only be enabled or disabled by admin.
To set Auto Answer via the phone interface:
1) Make sure active User type is admin.
2) Press the Menu soft key[3. SETTINGS[2. ADVANCED,
enter the password and press the OK button
3) Then choose 1. ACCOUNTS and then select an account,
use the UP and DOWN navigation keys to choose 12. Auto Answer option.
4) Use the LEFT or RIGHT navigation keys to enable or disable the Auto Answer func-
tion. The default is disabled.
5) Press the OK button or Save soft key to save the changes.
To set Auto Answer via the web interface:
1) Go to ACCOUNT[ACCOUNT SETTINGS page
2) Go to BASIC [AUTO Answer option.
3) Select Enabled or Disabled in the pull-down menu. Click SAVE button to save
the changes.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Log
The IP120 can store up to 100 calls in the Call log. There are 5 different lists:
• All calls
• Forwarded calls
• Missed calls
• Received calls
• Dialed calls
The call logs can be accessed through the web interface (CONTACT [PHONE CALL INFO).
Accessing the Call log
Users can access the Call log by pressing the LEFT navigation button from idle
mode. This is the “All calls” list, where calls are sorted sequentially, and each call is
marked with the corresponding icon.
To change list use the RIGHT navigation key. Note the words at the top of the
screen which indicate the list.
Accessing the Missed Calls list
Users can access the Missed Calls list by pressing the LEFT navigation key from idle
mode to reach Call log and then RIGHT navigation key twice.
The missed calls will appear at the top of the screen when in the Missed Calls list.
Accessing Dial Calls list
User can access the Dialed calls list directly by pressing the UP navigation key
from idle mode.
Users can also access this list by pressing the LEFT navigation key to enter the Call
History, and then the LEFT navigation key again.
The dialed calls will appear at the top of the screen when in the Dialed Calls list.
Call list items management
When in a call list, users can:
1) Dial the current entry by pressing the Send soft key, or
2) Store it in the Directory by pressing the OPTION soft key and select “Add to
Contacts”, or
3) Delete it pressing Delete soft key
30
Download from Www.Somanuals.com. All Manuals Search And Download.
During an Active Call
Mute
This function allows users to mute the microphone of the phone during a call.
Users cannot be heard by the other party, but can still hear all other parties while
mute is enabled.
To mute or resume the conversation:
Press MUTE/CANCEL button during a conversation to mute the current call, the
icon
will be shown on the screen, and the indicator LED will blink. Press MUTE/
CANCEL again to unmute the call.
Call Hold
This call function allows users to place an active call on hold. In this case the ser-
vice provider might play a melody or a message to the other party while they are
waiting. Other calls can be received and made while a call is on hold.
To hold/resume a call:
Press the Hold soft key to put an active call on hold.
If there is only one call on hold, press the Hold soft key again to retrieve the call.
If there is more than one call on hold, press the UP or DOWN navigation keys to
select the desired call, then press the Resume soft key to retrieve the call.
Call Waiting
This call feature allows the phone to accept other incoming calls when there are
other active calls.
Handling a waiting call
By default, Call Waiting is enabled and when an incoming call is received during
another active call.
In this situation, a user can:
1) Accept the second call using the OK key. The first one will be put on hold auto-
matically. Or
2) Reject the call using MUTE/CANCEL button
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Waiting Configuration
To configure Call Waiting via the phone interface:
1) Make sure the active User Type is admin or var.
2) Press the Menu soft key[2. FEATURES[2.CALL WAITING.
3) Use the LEFT or RIGHT navigation keys to enable or disable the call waiting feature.
4) Use the navigation keys to enable the disable the Play Tone option. This option
is used to determine whether to play an alert tone when there is an incoming call
during an active call.
5) Press the OK button or the Save soft key to save the changes, or the Back soft key
to return to the previous menu.
To configure Call Waiting via the web interface:
Go to PHONE [FEATURES (General Information)
Call Transfer
This call function allows the phone to transfer an active call to another phone. Blind
Transfer, Attended Transfer and Semi-Attend Transfer are supported.
To make a Blind Transfer (no prior announcement of the call) via the phone interface:
1) Press the Tran soft key during an active call and the call is put on hold.
2) Dial the second phone number and press Tran soft key to complete the transfer.
To make an Attended Transfer (with prior announcement) via the phone interface:
1) Press the Tran soft key during an active call. The call is put on hold.
2) Dial the second phone number.
3) When the call is answered, press the Tran soft key to complete the transfer.
To make a Semi-Attended Transfer (no prior announcement of the call) via the
phone interface:
1) Press Tran soft key during an active call. The call is put on hold.
2) Dial the second phone number.
3) While third party’s phone is ringing, press Tran soft key or hang up.
Note: Make sure that the service provider supports this function.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
3-way Conference
The IP120 is able to establish a three-party conference by locally connecting the
audio signals of two calls.
To establish a conference via the phone interface:
1) Once the 1st call is active, press the Conf soft key and the 1st caller is put on hold.
2) Dial the 2nd call.
3) When with the 2nd call is active, press the Conf soft key to establish the conference.
4) Hang up to disconnect all calls.
To split a conference :
Press the Split soft keyand both lines will be put on hold. Using the line keys (or UP
and DOWN navigation keys) to select a call and press the Resume soft key to select
the line to talk to.
To make new call during conference:
Press the line key button which is not in use. The call conference will be put on hold
and a Call dial screen will show up . Enter the number to make new call.
Voicemail
Voice mailbox messages, stored locally or hosted on a VoIP telephony system, can be
accessed from the phone.
New voice messages can be indicated both acoustically and visually as described below:
The idle screen will show this icon
, indicating new voice messages.
The VOICEMAIL button backlight will be on.
The blue LED of the phone will be on solid.
Voicemail settings
To configure the Voicemail code via the phone interface:
1) Press the Menu soft key[4. MESSAGES[ 2. SET VOICE MAIL.
2) Make sure the user type is admin or var , then enter the number to connect to the
system voicemail.
3) Press the OK button or SAVE soft key to save the change, or press the BACK soft
key to return to the previous menu.
Note:1.Theserviceproviderwillsupplytheconnectingcode.Differentsystemshavedifferentcodes.
To configure Voicemail settings using the web interface:
1) Go to ACCOUNT[ACCOUNT SETTINGS and set the Voicemail number.
Retrieving Voicemail messages
To check voicemail status via the phone interface:
1) Press the Menu soft key[4. MESSAGES[1. VIEW VOICE MAIL.
2) This screen will display each account. Press the Enter soft key to access the
voicemails for this account.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
To listen to new messages via the phone interface:
1) Press the VOICEMAIL button.
2) The users will be prompted to enter the password which is needed to connect to
the VoIP telephony system.
3) The voice mailbox is called and users are able to listen to their new and old
voicemails.
Note: 1. Before retrieving the voicemails, please make sure that the connecting code
has been set on the phone.
2. If there is more than one account set on the phone, the active account mailbox
will be called when the VOICEMAIL button is pressed.
Advanced Functions
Account Setting
Please refer to the “Configuration and Registration” section for the basic account
setting information. The following table lists the parameters in Advanced Account
Setting section of the web interface.
Field Name
Local SIP Port
DTMF Type
Description
Local SIP port. The default value is 5060.
Select DTMF type.
This document defines an extension to
the Session Initiation Protocol (SIP). This
extension allows for a periodic refresh
of SIP sessions through a re-INVITE or
UPDATE request. The refresh allows both
user agents and proxies to determine if
the SIP session is still active.
Session Timer (seconds)
Voice Encryption (SRTP)
ptime(ms)
Voice Encryption (SRTP)
The time between two RTP packets of
the current used codec
SIP Server Type
The type of SIP Server
34
Download from Www.Somanuals.com. All Manuals Search And Download.
These parameters can only be configured via the web interface:
1) Go to ACCOUNT [ ACCOUNT SETTINGS.
2) Select desired account.
3) Set any desired parameters in the Advanced section.
Check with the network administrator or service provider for more information.
Network Settings
Please refer to the “Configuration and Registration” section for the Basic Network
WAN setting information. The next paragraphs will describe other Network related
settings.
Advanced Network Settings
VLAN
VLAN is a group of hosts with a common set of requirements that communicate
as if they were attached to the Broadcast domain, regardless of their physical
location.
The IP120 supports 802.1p and q packet tagging. VLAN ID and Priority can be set
via the phone or web interface.
To configure VLAN settings via Phone interface:
1) Make sure the active User Type is admin or var
2) Press the Menu soft key [3. SETTINGS [2. ADVANCED.
3) Enter the password required, scroll to the 2.Network option, press the OK but-
ton and select 2.VLAN, then press the OK button or the Enter soft key to enter.
4) Choose WAN Port and press the OK button or the Enter soft key to enter.
5) Use the LEFT or RIGHT navigation keys to choose and set the VLAN Status; input
the VID Number and Priority.
6) Press the OK button or Save soft key to save the settings, or the Back soft key
to return to VLAN menu.
To configure VLAN settings via the web interface:
Choose NETWORK[ADVANCED. Perform necessary changes. Check with the
network administrator for more information.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
HTTPS
The IP120 supports HTTPS (Hypertext Transfer Protocol over Secure Socket Layer).
Adding an SSL layer under HTTP, in short, adds a security layer to HTTP. Adminis-
trators can set this transmission mode via the web interface.
To configure the HTTPS settings via the web interface:
Go to NETWORK [ADVANCED, choose the Web Server option. In the pull-down
menu of Type field, choose the transmission mode, then click the CONFIRM but-
ton to save the changes.
802.1X
IEEE 802.1X is an IEEE Standard for port-based Network Access Control (PNAC).
It is part of the IEEE 802.1 group of networking protocols. It provides an authen-
tication mechanism to devices wishing to attach to a LAN, either establishing a
point-to-point connection or preventing it if authentication fails. It is used for
securing wireless 802.1x access points and is based on the Extensible Authentica-
tion Protocol (EAP).
This phone supports 802.1X. For the details, please consult the network adminis-
trator or service provider.
Reset to Factory Settings
Users should reset the phone only when the phone configuration has been
changed and the phone is no longer functioning anymore. To maintain the con-
figuration of the phone, please see the network administrator or service provider
for assistance.
To reset to factory via the phone interface:
1) Make sure active User Type is admin or var
2) Press the Menu soft key[3. SETTINGS[2. ADVANCED.
3) Users will be prompted to enter the required password.
4) Scroll to 4.Reset Factory option, then press the OK button or the Enter soft key.
5) Users will be prompted to confirm the change. Press the OK button to reset to
factory settings, or the Back soft key to return to previous menu.
It will take a few minutes to reset, please do not power off during the resetting
process, or it will cause a flash memory error.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: When perform a factory reset, all current settings including contact list, call
history, account settings, etc will be lost.
The phone will have to be configured manually or reprovisioned.
Firmware Update and Autoprovisioning
The phone is delivered with pre-installed firmware. If users require updating the
phone’s firmware, please contact the system administrator. Updating the firmware
can only be done via the web interface.
To update the firmware manually via the web interface:
Choose SYSTEM [ UPGRADE; select the firmware file in the local computer.
Click the upgrade button to update the new firmware.
Please do not power off during the updating.
To update the firmware and configuration automatically, auto provisioning can
also be used.
Note: Please check with the network administrator or the service provider for auto-
provisioning.
To launch Autoprovisioning using web interface:
Go to SYSTEM[PROVISIONING Settings
Set Auto Provision via phone interface:
1) Press the Menu soft key [3. SETTINGS [2.ADVANCED
2) Users will be prompted to enter the password
3) Scroll to 7. Auto Provision and press the OK button.
Enter the URL, User Name and Password (if needed).
Press the OK button or the Save soft key to save the changes and reboot the phone.
Note: 1. Any power interruption during the subsequent process will most likely
lead to a flash memory error. As a result the system may no longer be able to start
properly. This procedure can be only conducted in Administrator Mode.
2. The upgrade priority is DHCP options then preconfigured URL .
Decryption
The IP120 supports configuration file encryption for provisioning. In case encryp-
tion is used, the AES key needs to be configured on the phone.
To set the AES key via the web interface:
Go to SYSTEM [ PROVISIONING SETTINGS
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Ask the network administrator for the decrypt password.
To set the AES Key via the phone interface:
Press the Menu soft key[3. SETTINGS[2. ADVANCED[6. Set AES Key.
Enter the Common AES and the MAC-oriented option.
Press the OK button or Save soft key to save the changes.
System Log Export
This feature capture a record of the system log to track any errors that may occur.
To enable the system log capture via phone interface:
1) Make sure active User Type is admin
2) Press Menu soft key [ 2.FEATURES [ 8.LOGS SETTING
3) Use LEFT and RIGHT navigation keys to choose Enable
4) Press the OK button to save the changes
5) Reboot the phone
To enable the system log capture via web interface:
1) Go to SYSTEM [ LOG SETTINGS web page
2) Change the “Print Enable” to Enable
3) Press the Save button.
4) After the Log Settings is saved successfully, reboot the phone
To export the system log via web interface:
1) Make sure the logs setting is enabled.
2) Perform the operation on phone that causes the issue or error
3) Go to SYSTEM [ LOG SETTINGS web page of the phone
4) Press the “Export” button
5) After the log file is created successfully, press the link “Save it locally” to
download the log file
Keys configuration
End of dialing key configuration
Admins can set a specific button (“#” or “*”) as the send key. If this feature is
enabled, once a user has dialed the desired number, they can press this send key
to dial the number immediately.
Please check END OF DIALING KEY configuration in the “Basic Calls” section for a
complete description.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable keys
The keys from 0-9 ( memory keys ) and the Hot key on the keypad are editable.
Users can customize specific features for these keys according to their needs. (The
keys are only available when the phone is in idle mode).
This function can only be set via the web interface:
PHONE [FUNCTION keys (Memory Key)
Default configuration of function keys for idle mode is:
• Up key: access to dialed list
• Down key: access to call forward
• Left key: access to call log
• Right key: access to account switch
• OK key: access to status
Line keys Configuration
The phone has 3 line keys to which functions can be assigned out of a list of func-
tions. The following list shows the functions users can set on the Line keys. The next
sections provide a description for each function. The default configuration for each
key is Auto Select Line.
• Line
• Speed Dial
• Conference
• Transfer
• Hold
• DND
• Call Return
• Pick Up
• Call Park
• Voice Mail
• Prefix
• Redial
Note: Many of those features require an IP PBX or service provider support and must
be configured in the server first in order to work on the phone. Contact the network
administrator or service provider for more details.
In addition, please note that not all the servers support the above mentioned features.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Line
The most frequent usage for line keys is assigning them one of the three possible
user accounts for call management.
To assign the key as Line via the web interface:
Go to PHONE [ FUNCTION Keys (Line Key)
Speed Dial
Users can configure the line keys as a simplified speed dial key. This function al-
lows users to easily access the most frequently dialed numbers.
To assign the key as Speed Dial via the web interface:
Go to PHONE [ FUNCTION Keys (Line Key)
Conference
Users can configure the Line keys to be used as a conference key while remaining
in the current call. This allows a user on a call to conference another party while
remaining in the conference.
To assign the key as Conference via the web interface:
Go to PHONE [ FUNCTION Keys (Line Key)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer
Users are able to configure a line key as a transfer key to perform the Blind/At-
tended/Semi-Attended Transfer. The main difference with Transfer hard key is in
this case users can pre-configure the number to which transfer will be performed.
This is very useful when there is a limited number of numbers to which users will
transfer their calls.
To assign the line key as Transfer via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Hold
The line key can be configured as a hold key. Users can use this key to hold and
retrieve a call during the conversation.
To assign the key as Hold via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
DND
If the line key is configured as DND key, it will work as a toggle key to enable or
disable this service.
Please check the “DND” section in the Incoming calls section of Basic Call Func-
tions chapter for more information about this function.
To assign DND to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Call Return
The Call Return function dials out the last number from which the user received a call.
If there is already an active call, when pressing Call Return key the first call will be put
on hold and a new one will be sent to the Call Return number.
To assign Call Return to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Pick Up
The Pickup key allows users to perform call capture from another ringing sta-
tion with a single key press. This feature is not supported by all service providers.
Please check with the service provider or IP PBX vendor for more details.
To assign Pick Up to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Park
Call Park is a feature that allows a user to put a call on hold at one telephone set
and continue the conversation from any other telephone set. Not all service pro-
viders support this feature. Please check with the service provider or IP PBX vendor
for more details.
The “call park” feature is activated by pressing a preprogrammed button or a spe-
cial sequence of buttons. When the conversation which is monitored was trans-
ferred to an unused extension number, users can press this key to retrieve the call.
To assign the key as Call Park via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Voice Mail
When the line key is configured as Voicemail key users can access voicemail
quickly by pressing this key.
To assign the key as Voice Mail via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Prefix
When users press a key in which prefix function has been set up, the phone will
automatically dial the prefix and they will only have to dial the rest of the cor-
respondent number to call out. Prefix can only be assigned to the line keys.
To assign the key as Prefix via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Redial
IIf a key is configured as a Redial key:
• If users press this key in idle status, it will enter the Dialed Calls interface.
• If users press this key in off hook mode, last dialed number will be
dialed immediately.
• If users press this key when there is an active call, the call will be put
on hold and a new call sent to the last dialed number.
To assign Redial to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
The phone cannot register to the server
Check the IP address (press the OK key for status).
Check the gateway.
Check the DNS server.
Make sure all account information is verified correct as received from the service
provider.
Check whether the SIP server is on.
Check the SIP register port, the default value is 5060.
The phone can’t get an IP address
Make sure the Ethernet cable is plugged into the WAN port.
Make sure there is an available DHCP server on, and there are available IP addresses
in the server.
Try to set the WAN port to static IP client mode.
During a call, users cannot hear any voice
Make sure the handset is tightly connected with the phone.
Check whether the conversation is muted or not.
Consult the outbound server details with the service provider.
The phone cannot send DTMF digits during calls
Check which kind of DTMF the phone is using, and whether it is compatible with the
server.
Consult the payload value with the service provider.
Time and date are not correct
Select the right time zone or enter the time information manually on the phone.
How can a user answer an incoming call during a call?
If a call comes in when a user is on an active call, press the OK button to answer the
incoming call.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
How can a user refuse incoming calls during a call?
To refuse current incoming call press the MUTE/CANCEL button.
To refuse all incoming calls that may arrive when users are in on active calls, they
can turn on the DND feature.
How to update the firmware?
Enter the webpage of the phone, go to SYSTEM [ UPGRADE.
1) Select the file to update, and then click the upgrade button.
Note: Make sure the firmware chosen is provided by the service provider, or the
device may crash after the update.
How can users autoprovision?
Consult the auto provision server address with the service provider.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
If trouble is experienced with this equipment, for repair or warranty information, please
contact customer service at 1-800-511-3180. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the equipment
until the problem is resolved.
This product may be serviced only by the manufacturer or its authorized service agents.
Changes or modifications not expressly approved by Telefield NA Inc. could void the user’s
authority to operate this product. For instructions on how to obtain service, refer to the
warranty included in this guide or call customer service at 1-800-511-3180.
Or refer inquires to:
Telefield NA Inc.
Manager, Consumer Relations
4915 SW Griffith Dr. #205
Beaverton, Or 97005
Attach your sales receipt to the boOKlet for future reference or jot DOWN the date this
product was purchased or received as a gift. This information will be valuable if service
should be required during the warranty period.
Purchase date ________________________________________________
Name of store, installer or dealer _________________________________
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Limited Warranty
What your warranty covers:
• Defects in materials or workmanship
For how long after your purchase:
• Two years, from date of purchase
What we will do:
• Provide you with a replacement unit. The exchange unit is under warranty for the
remainder of
the original product’s warranty period.
How you get service:
• Locate your proof of purchase in the form of a bill of sale or receipted invoice which is
evidence
that the product is within the warranty period. Proof of warranty eligibility is required and
must be presented to obtain warranty service.
• Contact RCA Customer Care at (800) 511-3180. Our representatives will help you
troubleshoot and diagnose the problem. As you may be asked to disconnect your RCA
telephone from it’s power source, you must call from another telephone. If the issue cannot
be resolved by our Customer Care Team, you will be issued an RMA (Return Merchandise
Authorization) number and be given instructions on how to submit your proof-of-purchase
paperwork and where to send your defective merchandise.
• You will be responsible for shipping the defective unit back to our warranty fulfillment
center at your own expense. You are responsible for damage or loss during shipment so
insuring the product during return shipping is highly recommended.
• We will ship a replacement to you freight pre-paid.
What your warranty does not cover:
• Customer instruction. (Your Instruction BoOK provides information regarding operating
instructions and user controls. Additionally, our Customer Care Center is staffed 24x7 with
product experts that can assist you with any questions that may arise during setup and use
of your RCA telephone.
• Installation and setup service adjustments
• Batteries, if applicable
• Damage from misuse or neglect
• Products that have been modified of serviced outside the USA
• Products purchased from non-authorized retailers, dealers or resellers
47
Download from Www.Somanuals.com. All Manuals Search And Download.
• Products purchased or serviced outside the USA
• Acts of nature, such as, but not limited to lightning damage
• 3rd party products, such as headsets
Product Registration:
• Please complete and mail the Product Registration Card packed with your unit. It will
make it easier to contact you should it ever be neccessary. The return of the card is not
required for warranty coverage.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS
PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN
INFORMATION GIVEN BY TELEFIELD NA INC., ITS AGENTS, OR EMPLOYEES SHALL
CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
•REPAIR OF REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. TELEFIELD NA INC. SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY
ARE GOVERENED BY THE LAWS OF THE STATE OF OREGON. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts so the above limitations or
exclusions may not apply to you.
• This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state.
If you purchased your product outside the USA, Mexico or Canada:
This warranty does not apply. Contact your dealer for warranty information.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Please do not send any products to the Oregon address listed in this manual or on the
carton. This will only add delays in service for your product.
Telefield NA Inc.
4915 SW Griffith Dr. #205
Beaverton, Or 97005
RCA is a trademark of RCA Trademark Management S.A.,
Used under license.
© 2012. All rights reserved.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
|