MAF75BKR
Fits TVs 26”- 40”
flat panel solutions
Wall Mount for LCD, Plasma, and
LED Displays
Maximum Load
Capacity – 100 lb (45 kg)
Installation Manual
Thank you for choosing the RCA MAF75BKR Universal Flat Panel
TV Wall Mount. This mount can be used for all major brands of
26" - 40" flat panel TVs, 100 lbs (45 kg) or under. This wall mount
features a 0-15-degree tilt for easy viewing. Before attempting
to mount your television set, please remove all parts from this
package and read the installation instructions carefully.
CAUTION:
This wall mount is intended for use
only with the maximum weight of
45 kg/100 lbs. Use with heavier
than the maximum weights
indicated may result in instability
causing possible injury. Follow
the installation and operation
instructions carefully.
WARNING: Use of this mount with a TV weighing over 100
lbs. or with a screen larger than 40" could cause the mount
to fail causing property damage and/or personal injury.
Safety precautions
Follow these precautions to ensure safe installation and mounting of your flat panel TV.
1. Read these instructions carefully before you begin.
If you are unsure of any part of the process, contact
a professional contractor or installer for assistance.
Improper installation can result in injury or damage.
5. For drywall installation, it is essential for the
wall mount plate to be attached to wall studs.
(Use a stud finder.)
6. Use the included hardware for mounting purposes.
This hardware has been provided to ensure a safe
and secure mount.
2. The wall or mounting surface must be capable of
supporting the combined weight of the mount and
the display; if not, the structure must be reinforced.
7. Hire a licensed electrician to relocate an electrical
3. Safety gear and proper tools must be used. Failure
to do so can result in injury and/or damage. A
minimum of two people are required for installation.
Do not attempt to install this mount alone under any
circumstances.
outlet, if needed.
8. Be sure to purchase wires long enough to connect
the TV to the audio and video components in your
installation.
Keep your sales receipt to obtain warranty parts and
service and for proof of purchase. Attach it here and
record the model number. This number is located on
the product.
4. Follow all instructions and recommendations
regarding adequate ventilation and suitable
locations for mounting your display. Consult the
owner‘s manual for your particular display for more
information.
Model No. ____________________________________
Purchase Date_________________________________
Dealer/Address/Phone _________________________
Preparing to install
Before beginning the installation process, verify that you have all the necessary tools on hand. The following
tools are required for proper installation:
Tools
Package Contents
Wall Plate (x1)
Pour des instructions
en français, se
Phillips Head Screwdriver
reporter à la page 6.
Ratchet or Driver with 13 mm (1/2”) Socket
Electric or Portable Drill
Mount Arm (x2)
Tilt Adjustment Rod (x1)
Safety Bar (x1)
Para obtener
instrucciones en
español, consulte la
página 11.
3/16” (4.8 mm) Drill Bit and Stud Finder for Drywall
Installation
Instruction Manual (x1)
Hardware Kit (x1)
3/8” (10 mm) Masonry Bit for Concrete Installation
Continues on next page...
Download from Www.Somanuals.com. All Manuals Search And Download.
Concrete/Brick Installation
IMPORTANT! For safety reasons, the concrete wall must be capable of supporting the combined weight of
the mount and the display. The manufacturer takes no responsibility for failure caused by walls of insufficient
strength.
1. Place the wall plate against the wall in the desired
location and level it using the integrated bubble
level.
4. Insert a Concrete
Anchor (C) into each
hole so that it is flush
with the concrete
surface (see Fig. 4).
A hammer can be
used to lightly tap
the anchors into
2. While another
person holds the
wall plate in place,
mark four evenly
spaced locations on
the wall for securing
the mount (see Fig.
3).
place if necessary.
Fig.4
5. Place the wall plate back against the wall and
attach it using the lag bolts (A) and lag bolt washers
(B) (see Fig. 2). Do not over-tighten these bolts and
do not release the wall plate until all bolts are in
place. Ensure that the wall plate remains level after
all bolts are secured.
Fig.3
3. Set the wall plate aside and drill a 10 mm (3/8”) hole
at each marked location. Remove any excess dust
from the holes.
Attaching the Arms to the TV
IMPORTANT! Use extra care during this part of the installation. If possible, avoid placing your display facedown
as it may damage the viewing surface.
NOTE: This mount comes with a selection of different screw diameters and lengths to accommodate a wide
variety of display models. Not all of the hardware in the kit will be used.
1. Determine the correct length of screw to use by
4. Pass the tilt adjustment rod through both arms
as shown in Fig.6. Make sure the long part of the
tilt adjustment knob faces downwards, exactly as
shown. Replace the missing tilt adjustment knob
using a screwdriver. The final assembly should
match Fig.7.
examining the back of your display:
A. If the back of your display is flat and the
mounting holes are flush with the surface, you
will use the shorter screws (D, F, or H) from the
hardware kit.
B. If the back of your display is curved, has
a protrusion, or if the mounting holes are
recessed, you will need to use the longer screws
(E, G, or I) and spacers (K).
2. Determine the correct diameter of screw to use
by carefully trying one of each size (M4, M6, and
M8) from the hardware kit. Do not force any
of the screws – if you feel resistance stop
immediately and try a smaller diameter screw.
Fig.6
3. Find the tilt adjustment rod and remove one the tilt
adjustment knobs using a screwdriver (see Fig.5).
Place the knob and screw in a safe location.
Continues on next page...
Fig.5
3
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Attach the mount arms to the back of your display
using the screws identified in Steps 1 and 2 (see
Fig.11):
A. If you are using the M4 or M6 screws you will
also need to use the M6 washers (J). M8 screws
do not require washers.
B. If you are using the longer screws on a display
with a curved or recessed back, you will also
need to use the spacers (K). Use one spacer or
two spacers stacked as needed. You should
only use a spacer if necessary.
Fig.7
5. Remove the clips located towards the top of each
arm and take out the pins (see Fig.8). Then push
down and hold both tilt adjustment rod knobs
simultaneously. Lift both sides of the rod together
and open both arms completely as shown in Fig.9.
For displays
with flat backs.
For displays with
curved or
recessed backs.
Fig.11
8. Close the mount arms by returning them to the
original position. Insert the pin and replace the
clip on both arms (see Fig.12). Make sure the tilt
adjustment rod is turned to the locked position
by rotating the knobs away from the display. The
mount arms must be fully closed and locked
before moving on to the next part.
1
Fig.8
Fig.9
6. Place the opened
arms over the back
of your display. Adjust
the arms along the
length of the tilt
adjustment rod so
that they line up with
the mounting holes
on back of your
Fig.12
display. The hinges on
the arms should be
located towards the
bottom of the display
(see Fig.10).
Fig.10
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Final Installation
1. With the help of another person, carefully lift your display and place it on the wall plate. Do not release the
display until the mount arms have securely hooked onto the wall plate.
2. Insert the safety bar at the bottom of the mount to
Fig.13
prevent the display from being lifted from the wall
plate. A padlock can be inserted into the end of the
bar to help prevent theft of your display (see Fig.13).
IMPORTANT! The safety bar must be used at all
times to prevent the display from being accidentally
knocked from the mount.
Padlock (optional,
Safety Bar
not included)
Operation and Adjustment
To change the tilt angle of your display: Hold the display firmly with one hand and rotate one of the tilt
adjustment knobs towards the display to unlock the tilt. Carefully move the display to the desired position and
return the knob to its original position to lock it in place. Do not release the display until the tilt is locked in
place.
Periodically clean your mount with a dry cloth. Inspect all screws and hardware at regular intervals to ensure that
no connections have become loose over time. Re-tighten as necessary.
Specifications
Display Size:
26” to 40”
Maximum Load:
45 kg (100 lbs)
Universal VESA Mounting Pattern:
400 mm x 400 mm
(15.7” x 15.7“) max
Tilt Range:
Profile:
15° down
4.5 cm (1.8”)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Lifetime Warranty
Audiovox Electronics Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal use and
conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the
Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
specification of defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the Retailer.
This Warranty does not cover product purchased, serviced or used outside the United States or Canada.
This Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not
apply if in the Company’s opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE
AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to
assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary
from state/province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5
Garantie à vie limitée
Audiovox Electronics Corporation (l’« Entreprise ») vous garantit en tant qu’acheteur de détail d’origine du présent produit que, s’il présente des défauts
de matière ou de fabrication dans des conditions d’utilisation normales pendant sa durée de vie alors que vous en êtes propriétaire, ce/ces défaut(s) feront
l’objet d’une réparation ou d’un remplacement (à la discrétion de l’Entreprise) sans frais pour les pièces et pour les heures de main-d’œuvre.
Pour obtenir une réparation ou un remplacement en vertu des termes de la présente garantie, le produit doit être livré à l’Entreprise avec preuve de
couverture de garantie (c’est-à-dire une preuve d’achat datée), une description du ou des défauts, et les frais de transport payés d’avance, à l’adresse
indiquée ci-dessous. Ne pas retourner ce produit chez le détaillant.
La présente garantie ne couvre pas de produit acheté, réparé ou utilisé à l’extérieur des États-Unis ou du Canada.
La présente garantie ne peut pas être transférée et ne couvre pas les frais encourus pour l’installation, l’enlèvement ou la réinstallation du produit. La
présente garantie ne s’applique pas si, selon l’avis de l’Entreprise, le produit a été endommagé suite à une modification, une installation incorrecte, une
manipulation incorrecte, une mauvaise utilisation, une négligence ou un accident.
L’ÉTENDUE DE LA RESPONSABILITÉ DE L’ENTREPRISE EN VERTU DE LA PRÉSENTE GARANTIE EST LIMITÉE À LA RÉPARATION OU AU
REMPLACEMENT INDIQUÉS CI-DESSUS ET, EN AUCUN CAS, LA RESPONSABILITÉ DE L’ENTREPRISE NE PEUT DÉPASSER LE PRIX D’ACHAT
PAYÉ PAR L’ACHETEUR POUR LE PRODUIT.
Cette garantie remplace toute autre garantie ou responsabilité expresse. TOUTE GARANTIE IMPLICITE, INCLUANT TOUTE GARANTIE IMPLICITE DE
QUALITÉ MARCHANDE OU D’ADAPTATION À UN USAGE PARTICULIER EST LIMITÉE À LA DURÉE DE LA PRÉSENTE GARANTIE. EN AUCUN
CAS L’ENTREPRISE NE PEUT ÊTRE RESPONSABLE POUR UN QUELCONQUE DOMMAGE CONSÉCUTIF OU INDIRECT. Aucune personne ou aucun
représentant n’est autorisé à assumer pour l’entreprise une quelconque responsabilité autre que celle exprimée dans les présentes en relation avec la vente
de ce produit.
Certaines juridictions n’autorisent pas de limites quant à la durée d’une garantie implicite ou quant à l’exclusion ou la limitation de dommages indirects ou
consécutifs; les limitations et exclusions indiquées dans les présentes pourraient donc ne pas s’appliquer à votre cas. Cette garantie vous donne des droits
légaux spécifiques et vous pourriez également jouir d’autres droits qui varient d’une juridiction à l’autre.
É-U : Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA : Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5
Garantía Limitada Durante la Vida Útil del Producto
Audiovox Electronics Corporation (la “Compañía”) le garantiza a usted, el comprador original de este producto que si, bajo condiciones y uso normales,
se encontrara que presenta defectos materiales o de mano de obra durante su vida útil mientras sea de su propiedad, tales defectos serán reparados o
reemplazados (a opción de la Compañía) sin cargo alguno por las piezas y labores de reparación.
Para obtener los servicios de reparación o reemplazo dentro de los términos de esta Garantía, el producto se entregará con prueba de cubierta de garantía
(por ejemplo, factura fechada de venta), especificación de los defectos, transporte prepagado, a la Compañía a la dirección indicada abajo. No devuelva este
producto al Distribuidor.
Esta Garantía no cubre un producto adquirido, mantenido o utilizado fuera de los Estados Unidos o Canadá.
Esta Garantía no es transferible y no incluye los costos incurridos en la instalación, remoción o reinstalación de este producto. Esta Garantía no aplica si, es
opinión de la Compañía que, este producto ha sufrido daños debido a alteraciones, instalación inadecuada, abuso, uso indebido, negligencia o accidente.
EL ALCANCE DE LA RESPONSABILIDAD DE LA COMPAÑÍA BAJO ESTA GARANTÍA ESTÁ LIMITADO A LA REPARACIÓN O EL REEMPLAZO
PROVISTO ARRIBA Y, EN NINGÚN CASO, DEBERÁ LA RESPONSABILIDAD DE LA COMPAÑÍA EXCEDER EL PRECIO DE COMPRA PAGADO POR
EL COMPRADOR DE ESTE PRODUCTO.
Esta Garantía reemplaza cualesquiera otras responsabilidades o garantías expresas. CUALESQUIERA GARANTÍAS IMPLÍCITAS, INCLUYENDO
CUALQUIER GARANTÍA IMPLÍCITA DE COMERCIABILIDAD O ADAPTABILIDAD PARA UN PROPÓSITO EN PARTICULAR ESTARÁN LIMITADAS
A LA DURACIÓN DE ESTA GARANTÍA. EN NINGÚN CASO LA COMPAÑÍA SERÁ RESPONSABLE POR DAÑOS EMERGENTES O INCIDENTALES.
Ninguna persona ni representante está autorizado a asumir, a nombre de la Compañía, ninguna responsabilidad salvo la expresada aquí en conexión con
la venta de este producto.
Algunos estados/provincias no permiten limitaciones sobre la duración de una garantía implícita o la exclusión o la limitación de daños incidentales
o emergentes, de modo que es posible que las limitaciones o exclusiones anteriores no apliquen en su caso. Esta Garantía le confiere derechos legales
específicos; según el estado/provincia, puede disfrutar además de otros derechos.
EE.UU.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788
CANADÁ:: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5
© 2010 Audiovox Accessories Corporation
Trademark(s) Registered, Marques Déposées, Marcas Registradas.
All other brands and product names are trademarks or registered trademarks of their respective owners. / Toutes les autres marques et tous les autres
noms de produits sont des marques de commerce ou des marques de commerce déposées de leurs propriétaires respectifs. / Todas las demás marcas
y nombres de productos son marcas comerciales o marcas comerciales registradas de sus respectivos dueños.
MAF75BKR_US_IB_02
Download from Www.Somanuals.com. All Manuals Search And Download.
|