21011
2.4 GHz Dual Cordless Handset
CallWaiting Caller ID Speakerphone
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
We bring good things to life.
TABLE OF CONTENTS
EQUIPMENT APPROVAL INFORMATION ........ 2
INTERFERENCE INFORMATION ................... 2
HEARING AID COMPATIBILITY (HAC)........ 2
INTRODUCTION ..................................... 5
HANDSET AND CHARGE CRADLE LAYOUT .. 7
BASE LAYOUT ...................................... 7
BEFORE YOU BEGIN .............................. 8
PARTS CHECKLIST ............................. 8
TELEPHONE J ACK REQUIREMENTS ........ 8
IMPORTANT INSTALLATION INFORMATION .... 9
IMPORTANT INSTALLATION GUIDELINES .. 9
CONNECTING THE AC
WALKIET ALKIE ............................... 23
TIME OF DAY .................................. 25
DEFAULT ........................................ 26
BASIC OPERATION ............................... 27
SPEAKERPHONE .............................. 27
CHARGE INDICATOR ......................... 27
MAKING A CALL ............................. 28
HANDSET ............................... 28
SPEAKERPHONE ....................... 28
ANSWERING A CALL ........................ 28
HANDSET ............................... 28
SPEAKERPHONE ....................... 28
(ELECTRICAL) POWER ....................... 10
CONNECTING THET ELEPHONE LINE ..... 10
INSTALLING THE PHONE ........................ 10
INSTALLING THE HANDSET BATTERY ..... 11
WALL MOUNTING THE BASE ............. 12
TELEPHONE SETUP .............................. 12
PROGRAMMABLE FUNCTIONS ............. 12
USING THE SOFT KEYS ............. 12
LANGUAGE ..................................... 12
DISPLAY CONTRAST ......................... 13
AREA CODE ................................... 15
RINGERT ONE ................................. 16
TONE/PULSE .................................. 17
HANDSET REGISTRATION .................. 18
HANDSET DE-REGISTRATION .............. 21
GLOBAL DEREGISTRATION ................. 22
CALLT IMER .................................... 29
AUTO STANDBY .............................. 29
RINGER VOLUME SWITCH ................. 29
HANDSET ............................... 29
BASE ............................................ 30
FLASH/CALL WAITING ...................... 30
LAST NUMBER REDIAL ..................... 31
HOLD ............................................ 31
EXIT ............................................. 31
PAGING THE HANDSET ...................... 32
PAGING FROM THE BASE OR
HANDSET ....................................... 32
TRANSFERRING CALLS ...................... 33
MUTE ........................................... 34
TEMPORARYT ONE DIALING ............... 35
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
THE LIGHTNING
CAUTION: TO REDUCE THE
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO
HEAD WITHIN THE NOT REMOVE COVER (OR
TRIANGLE IS A
WARNING:TO
BACK). NO USER
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
WARNING SIGN
SERVICEABLE PARTS INSIDE.
ALERTING YOU OF REFER SERVICING TO
“DANGEROUS
QUALIFIED SERVICE
VOLTAGE” INSIDE
THE PRODUCT.
PERSONNEL.
PRODUCT TO RAIN
OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CORDLESS HANDSET VOLUME
CONTROL ............................ 35
SPEAKERPHONE VOLUME
CALLER ID ........................................ 44
RECEIVING AND STORING
CALL RECORDS ............................... 45
REVIEWING CALL RECORDS ............... 45
TRANSFERRING CID RECORDS
TO MEMORY ................................... 46
DIALING A CALLER ID NUMBER ......... 47
DELETING THE CALLER ID RECORD
SHOWING IN THE DISPLAY ................. 48
DELETING ALL CALLER ID RECORDS .. 49
CALLER ID ERRORS ......................... 50
REPLACING THE BATTERY ...................... 51
BATTERY SAFETY PRECAUTIONS ......... 51
HEADSET AND BELT CLIP
CONTROL ............................ 35
INTERCOM ...................................... 36
MAKING AN INTERCOM CALL ............. 36
RECEIVING AN INTERCOM CALL ... 37
RECEIVING AN EXTERNALT ELEPHONE
CALL DURING AN INTERCOM CALL ..... 37
BETWEEN HANDSETS ................ 37
BETWEEN BASE AND HANDSET .. 37
USING INTERCOM OR
CONFERENCE WITH
EXTERNAL CALLS ................. 37
MEMORY ........................................... 39
STORING A NAME AND NUMBER IN
MEMORY ....................................... 39
STORING A REDIAL NUMBER ............. 41
INSERTING A PAUSE IN THE DIALING
SEQUENCE ..................................... 41
REVIEWING, CHANGING OR DELETING
STORED NUMBERS .......................... 41
TO REVIEW: ............................ 41
TO CHANGE:........................... 42
TO DELETE: ............................ 42
DIALING A STORED NUMBER ............. 43
HANDSET ............................... 43
BASE ..................................... 43
CHAIN DIALING FROM MEMORY ......... 44
INSTALLATION .............................. 52
CONNECTING AN OPTIONAL
HEADSET TO THE HANDSET ................ 52
ATTACHING THE BELT CLIP ................ 52
DISPLAY MESSAGES ............................ 53
HANDSET SOUND SIGNALS .................. 54
TROUBLESHOOTING GUIDE ................... 54
GENERAL PRODUCT CARE .................... 57
CAUSES OF POOR RECEPTION ............... 58
SERVICE ............................................ 58
INDEX ............................................... 59
ACCESSORY ORDER FORM ................... 61
LIMITED WARRANTY ............................ 62
SAVETHESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
CAUTION: When using telephone equipment, there are basic safety
instructions that should always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this product and save them for
future reference.
Congratulations on purchasing this GE Dual Cordless HandsetTelephone
System .This system operates in the 2.4 GHz frequency range, and is unique to
conventional cordless telephones. When the base is connected to electrical
power and a telephone line, it can support up to two cordless handsets, and
you can place a fully featured cordless handset anywhere an electrical power
line is available.
Features:
•
•
•
•
•
•
•
2.4 GHz digital technology
Handset to handset Intercom
Speakerphone
2-way and 3-way Conference/CallTransfer
Call Waiting and Caller ID Com patible
Tone/Pulse Dialing
50 Nam e and Num ber Mem ory Locations in each handset and the base
This telephone has been designed to be sim ple to use, however, you can
reach its full potential m ore quickly by taking a few m inutes to read this
instruction book.This telephone is a m ultifunction product for use with Call
Waiting and Caller ID services available from your local telephone com pany.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Caller ID Call Waiting phone allows you to:
•
View the nam e and telephone num ber of a caller while you are on the
phone (Call Waiting Caller ID).
•
•
•
Identify callers before you answer the phone.
View the tim e and date of each incom ing call.
Record up to 40 Caller ID m essages sequentially in each handset and
the base.
•
•
Know who called while you are on the other line or when you were away.
Screen unwanted calls, elim inate harassm ent from annoying calls, or to
get prepared before answering a call.
IMPORTANT: Because cordless phones operate on electricity, you should
have at least one phone in your home that isn’t cordless, in case the power in
your home goes out.
IMPORTANT: In order to use all of the features of this telephone, you must
subscribe to two separate services available from your local telephone
company: the standard Name/ Number Caller ID Service to know who is
calling when the phone rings and Call Waiting Caller ID Service to know who
is calling while you are on the phone.
INSTALLATION NOTE: Some cordless telephones operate at frequencies
that may cause interference to nearby TVs, microwave ovens, and VCRs. To
minimize or prevent such interference, the base of the cordless telephone
should not be placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away from these
appliances. Certain other communications devices may also use the 2.4 GHz
frequency for communication, and, if not properly set, these devices may
interfere with each other and/ or your new telephone. Typical devices that may
use the 2.4 GHz frequency for communication include wireless audio/ video
senders, wireless computer networks, multi-handset cordless telephone
systems, and some long-range cordless telephone systems.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDSET AND CHARGE CRADLE LAYOUT
soft key
buttons
Display
AC power supply
format/
conference
button
handset charge cradle
TALK/ callback
button
f
e
re
n
c
n
e
o
cid/ vol
button
c
v
c
a
l
l
b
form at
a
c
k
l
o
v v
/
TALK
d
i
c
r
e
d
h
ia
s
l
fla
page
ringer
i
n
t
redial
button
def
abc
1
4
7
3
6
9
#
2
flash
button
ghi
m no
jkl
5
8
0
charge
wxyz
pqrs
tone
tuv
pause
oper
*
page/ int
button
ringer
button
charge indicator
# pause button
* tone button
BASE LAYOUT
soft key buttons
Display
ringer button
redial button
CID button
Back Side
flash button
volume
button
a
l
f
s
h
n
ri
ge
r
v
r
m
fo
ed
a
r
ia
t
format/
conference
button
v
o n
f
.
CID
def
1
4
7
abc
jkl
3
6
9
#
2
v
ghi
m
no
5
8
0
volum
e
v
wxyz
pause
pqrs
tone
tuv
charge
oper
*
charge
indicator
page/int.
k
c
a
b
l
l
ca
speaker
# pause button
page/ int. button
speaker/ callback button
* tone button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
PARTS CHECKLIST
Make sure your package includes the item s shown here.
l
f a
s
h
n
ri
ge
r
v
r
m
r
e
d
fo
a
i
a
t
v
o n
f
.
n
f
e
r
e
n
a
c
t
e
CID
c
o
o
n
f
e
r
e
n
a
c
t
e
v
fla
c
c
a
l
l
d
e
f
c
v
fla
b
a
c
k
form
1
4
7
a
b
c
a
l
l
b
3
6
9
#
a
form
2
c
k
l
o
i
c
v v
l
TALK
/
d
o
v
v v
T
ALK
/
d
i
c
g
p
h
q
i
m
w
n
o
jkl
re
d
ia
5
8
0
re
l
p
a
g
e
rin
c
g
e
r
s
h
d
ia
l
s
h
p
a
g
e
rin
c
g
e
r
i
n
volu
m
e
t
n
t
d
e
f
v
1
4
7
a
b
3
6
9
#
d
e
f
2
5
8
r
s
tu
v
xyz
1
4
7
a
b
3
6
9
#
2
5
8
g
p
h
q
i
m
w
n
o
jkl
g
p
h
q
i
m
w
n
o
jkl
ch
a
rg
e
to
n
e
p
a
u
s
e
o
p
e
r
*
r
s
tu
v
xyz
r
s
tu
v
xyz
p
a
g
e
/int.
c
k
a
l
l
b
ca
s
p
e
a
ke
r
to
n
e
p
a
u
s
e
o
p
e
r
to
n
e
p
a
u
s
e
0
o
p
e
r
*
*
0
Mounting pedestal Dual Handsets Belt clip
Handset batteries
Base
ch
a
rg
e
AC power supply
Handset charge cradle
Telephone line cord
TELEPHONE JACK REQUIREMENTS
Wall plate
To use this phone, you need an RJ 11C type m odular
telephone jack, which m ight look like the one pictured
here, installed in your hom e. If you don’t have a
m odular jack, call your local phone com pany to find out
how to get one installed.
Modular
telephone
line jack
8
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INSTALLATION INFORMATION
•
Never install telephone wiring during a lightning storm .
•
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
•
Never touch non-insulated telephone wires or term inals, unless the
telephone line has been disconnected at the network interface.
•
•
Use caution when installing or m odifying telephone lines.
Tem porarily disconnect any equipm ent connected to the phone such as
faxes, other phones, or m odem s.
IMPORTANT INSTALLATION GUIDELINES
•
•
•
Install telephone near both a telephone (m odular) jack and an electrical
power outlet.
Avoid sources of noise, such as a window by a busy street, and electrical
noise, such m otors, m icrowave ovens, and fluorescent lighting.
Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.
•
•
•
Avoid areas of excessive m oisture or extrem ely low tem perature.
Avoid dusty locations.
Avoid other cordless telephones or personal com puters.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE PHONE
Choose the best location to install your base and handset charge cradle.
Your base and handset charge cradle should be placed on a level surface
such as a desk or table top, or you m ay m ount the base on a wall.
charge
CONNECTING THE AC (ELECTRICAL) POWER
1. Plug the power supply cord into the power jack on the back of the
base and the other end into an electrical outlet. When the handset is
placed on the cradle the charge indicator turns on to indicate the
battery is charging.
CAUTION: Use only the ATLINKS USA, Inc. power supply 5-2562 that
came with this unit. Using other power supplies may damage the unit.
2. Plug the handset charge cradle into an electrical outlet.
CONNECTING THE TELEPHONE LINE
On the base, plug the one end of the telephone line cord into the jack on
the back of the base and the other end into a m odular phone jack.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE HANDSET BATTERY
NOTE: You must connect the handset battery before use.
1. Push down on the top of the battery com partm ent cover (located on the
back of each handset) and rem ove the cover.
2. Lift the battery pack and connect it's plug to the jack inside the
com partm ent.
NOTE: It is important to maintain the polarity (black and red wires) to the
jack inside the compartment as shown in the illustration.
3. Close the battery com partm ent by pushing the cover up until it snaps
into place.
4. Place the handsets in the charging cradles.
Allow handsets to charge for 12 hours prior to first use. If you don’t
properly charge the handsets, battery performance is compromised.
BATTERY
BLACK WIRE
PRESS DOWN
FIRMLY
RED WIRE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL MOUNTING THE BASE
NOTE: For best results, leave the phone on a flat surface during initial
charging before you hang the phone on the wall.
1. Turn the base over.
2. Attach the wall m ounting pedestal by first inserting the tabs on the open
edge of the pedestal into the slots on the lower portion of the bottom of
the base. Then push down and snap the pedestal into place.
3. Slip the m ounting holes (on the back of the pedestal) over the wall plate
posts and slide the unit down into place. (Wall plate not included.)
TELEPHONE SETUP
PROGRAMMABLE FUNCTIONS
This system uses a m enu structure and soft key function buttons to give
you access to all of the built-in features.
USING THE SOFT KEYS
There are three buttons under the display box which represent several soft
key (program m able) functions. Use the buttons to activate the soft key
icons that appear in the display box. You m ay program the following item s
with the soft keys: Language, Display Contrast, Area Code, Ringer Tone,
Tim e, Tone/Pulse, Registration, Deregistration, Walkie-Talkie, and Default
Setting.
LANGUAGE
This setting m ay be m ade with the handset or the base.
1. Make sure your phone is OFF (not in talk m ode).
2. Press the MENU soft key to go to the m ain m enu.
LANGUAGE
AREA CODE
OK
EXIT
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press cid/vol (up and down arrow) button on the handset or the CID (up
and down arrow) button on the base to scroll to LANGUAGE.
4. Press the OK soft key and SET LANGUAGE 1ENG 2 FRA 3ESP shows in
the display.
5. Use the touch tone pad on your handset to select 1ENG, 2FRA, or 3ESP,
or use the cid/vol (up or down arrow) button on the handset or the CID
(up or down arrow) button on the base to m ove the arrow to your
selection. English is the default setting.
SET LANGUAGE
1 ENG 2 FRA 3 ESP
OK
EXIT
6. Press the OK soft key to save your selection, and return to the m ain
m enu. The selected language displays for two seconds.
ENGLISH
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
LANGUAGE
AREA CODE
OK
LANGUAGE
COOKNTRAST
EXIT
EXIT
BASE DISPLAY
HANDSET DISPLAY
DISPLAY CONTRAST
This setting m ay be m ade with the base only.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Make sure your base is at the m ain m enu. If your base is not in the
m enu m ode, press the MENU soft key.
2. Press the CID (up or down arrow) button to scroll to CONTRAST.
LANGUAGE
COOKNTRAST
EXIT
3. Press the OK soft key and SET CONTRAST 1 2 3 shows in the display.
4. Use the touch tone pad on your base to select 1, 2, or 3, or use the CID
(up or down arrow) button to m ove the arrow to your selection. Contrast
level 1 is the default setting.
SET CONTRAST
1
2 3
OK
EXIT
5. Press the OK soft key to save your selection and return to the m ain
m enu. The selected contrast level displays for two seconds.
CONTRAST - 2
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu screen.
LANGUAGE
CONTRAST
OK
EXIT
14
Download from Www.Somanuals.com. All Manuals Search And Download.
AREA CODE
If you enter a 3-digit area code in the area code m enu, your local area code
will not appear in Caller ID m essages you receive. Instead, you will see
only the local seven digit num ber. Calls you receive from outside your
local area code will show the full ten-digit num ber.
This setting m ay be m ade with the handset or the base.
1. Make sure your handset or base is at the m ain m enu. If your handset or
base is not in the m enu m ode, press the MENU soft key.
2. Press the cid/vol (up or down arrow) button on the handset or the CID
(up and down arrow) button on the base to scroll to AREA CODE.
AREA CODE
RINGER TONE
OK
LANGUAGE
AREA CODE
OK
EXIT
EXIT
HANDSET DISPLAY
BASE DISPLAY
3. Press the OK soft key and SET AREA CODE - - - shows in the display. - - -
is the default setting.
SET AREA CODE
- - -
OK
EXIT
4. Use the touch tone pad on your base or handset to enter your three digit
area code.
5. Press the OK soft key to save your selection and return to the m ain
m enu. The selected area code displays for two seconds.
AREA CODE - 317
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE
AREA CODE
OK
AREA CODE
RINGER TONE
EXIT
OK
EXIT
HANDSET DISPLAY
BASE DISPLAY
RINGER TONE
This setting m ay be m ade with the handset or the base. You m ay choose
from six different ringer tones.
1. Make sure your handset or base is in the m enu m ode. If your handset or
base is not in the m enu m ode, press the MENU soft key.
2. Press the cid/vol (up or down arrow) button on the handset or the CID
(up and down arrow) button on the base to scroll to RINGERTONE.
AREA CODE
RINGER TONE
OK
RINGER TONE
REGISTRATION
OK
EXIT
EXIT
HANDSET DISPLAY
BASE DISPLAY
3. Press the OK soft key and SET RINGERTONE 1 2 3 4 5 6 shows in the
display.
4. Use the touch tone pad on your handset or base to select 1, 2, 3, 4, 5, 6 , or use
the cid/vol (up or down arrow) button on the handset or the CID (up or down
arrow) button on the base to move the arrow to your selection.The default
setting is 1.
SET RINGER TONE
1O2K 3 4 5 6
EXIT
NOTE: When you use the handset or base to set a ringer tone, the ringer tone
plays after you make your selection.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the OK soft key to save your selection, and return to the m ain
m enu. The new ringer tone is displayed for two seconds.
RINGER TONE - 2
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu screen.
AREA CODE
RINGER TONE
OK
RINGER TONE
REGISTRATION
OK
EXIT
EXIT
HANDSET DISPLAY
BASE DISPLAY
TONE/ PULSE
Most telephone system s use tone dialing, however, som e m ay still use
pulse dialing. Depending on your telephone system , set the dialing m ode
as follows:
This setting m ay be m ade with the base only.
1. Make sure your base is in the m enu m ode. If your base is not in the
m enu m ode, press the MENU soft key.
2. Press the CID (up or down arrow) button on the base to scroll to
TONE/PULSE.
TONE / PULSE
TIME
OK
EXIT
3. Press the OK soft key and SETTONE/PULSE 1TONE 2PULSE shows in
the display.
SET TONE / PULSE
1TONE 2 PULSE
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Use the touch tone pad on the base to select 1TONE or 2PULSE, or press
the CID (up or down arrow) button to m ove the arrow to your selection.
The default setting is 1.
5. Press the OK soft key to save your selection, and return to the m ain
m enu. The dialing m ode displays for two seconds.
TONE
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu screen.
TONE / PULSE
TIME
OK
EXIT
NOTE: If you aren’t sure which dialing system you have, set the telephone to
tone dialing and make a test call. If the call connects, the setting is correct. If
the call does not connect, set the telephone to pulse dialing.
HANDSET REGISTRATION
This setting m ay be m ade with the handset only. During the registration
process, keep your handset near the base. Make sure your handset is at
the m ain m enu. Make sure your phone is OFF (not in talk m ode).
1. Make sure your handset is at the m ain m enu. If your handset is not in
the m enu m ode, press the MENU soft key.
2. Press the cid/vol (up or down arrow) button to scroll to REGISTRATION.
RINGER TONE
REGISTRATION
OK
EXIT
3. Press the OK soft key and REGISTER HANDSET? shows in the display.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the OK soft key and HANDSET NEEDS REGISTRATION shows in
the display.
HANDSET NEEDS
REGISTER
REGISTRATION
HANDSET ?
OK
EXIT
OK
EXIT
5. Press the OK soft key and HOLD, BASE PAGE WAIT FOR BEEP shows in
the display.
HOLD BASE PAGE
WAIT FOR BEEP
EXIT
6. Press and hold the page/int button on the base until you hear a long
beep and the handset displays CONFIRM REGISTRATION?
CONFIRM
REGISTRATIONE?XIT
OK
7. P ress the OK soft key on the handset to confirm the registration.
HANDSET # REGISTERED displays for two seconds. When handset
registration is com plete, you m ay nam e the handset. ENTER NAME
shows in the display.
HANDSET 2
REGISTERED
ENTER NAME
OK
DEL
EXIT
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BILL SMITH
HMAENNDUSET 2
DIR
8. Use the touch tone pad to enter the nam e.
More than one letter is stored in each of the num ber keys. For exam ple,
to enter the nam e Bill Sm ith, press the 2 key twice for the letter B.
Briefly pause and the cursor m oves to the next field. Press the 4 key 3
tim es for the letter I. Briefly pause and the cursor m oves to the next
field. Press the 5 key 3 tim es for the letter L. Briefly pause and the cursor
m oves to the next field. Press the 5 key 3 tim es for the second letter L,
press 1 key to add a space. Press the 7 key 4 tim es for the letter S.
Briefly pause and the cursor m oves to the next field. Press the 6 key
once for the letter M. Briefly pause and the cursor m oves to the next
field. Press the 4 key 3 tim es for the letter I. Briefly pause and the cursor
m oves to the next field. Press the 8 key for the letter T. Briefly pause and
the cursor m oves to the next field. Press the 4 key twice for the letter H.
ENTER NAME
B OK
DEL
EXIT
EXIT
ENTER NAME
BIOLKL SMITH
DEL
NOTE: If you make a mistake press the DEL soft key to backspace and erase
the wrong character(s).
9. Press the OK soft key to save the nam e and return to the m ain m enu.
You will hear a confirm ation tone.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu. Or press and hold the EXIT soft key on the handset to return
to standby mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDSET DE-REGISTRATION
This setting m ay be m ade with the handset only. Deregistration cancels a
handset’s registration. If you do not know a handset’s nam e, you should
deregister the handset according to the steps below. During the de-
registration process, keep the handset near the base.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
1. Make sure your handset is in m enu m ode. If your handset is not in the
m enu m ode, press the MENU soft key.
2. Press the cid/vol (up or down arrow) button to m ove the arrow to
DEREGISTRATION.
DEREGISTRATION
WALKIE TALKIE
OK
EXIT
3. Press the OK soft key and DE-REGISTER HANDSET? shows in the
display.
DE - REGISTER
HANDSET 1 ?EXIT
OK
4. Press the OK soft key to de-register the handset, and MOVE NEARTO
BASE displays until the handset is m oved closer to the base.
MOVE NEAR
TO BASE
EXIT
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Then the handset displays CONFIRM DEREGISTRATION?
CONFIRM
DEREGISTRATION ?
OK
EXIT
5. Press the OK soft key to confirm the deregistration. HANDSET #
DEREGISTERED followed by REGISTER HANDSET? shows in the display.
HANDSET 1
DEREGISTERED
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu screen.
GLOBAL DEREGISTRATION
If one or m ore handsets becom es lost, you should de-register all handsets
to ensure proper system operation. Follow the steps below to deregister
both handsets at the sam e tim e.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
1. Press and hold the base page/int button on the base until the charge
indicator flashes.
2. Press and hold the base page/int button again until the charge indicator
flashes rapidly.
3. Press and release the page/int button on the base. The charge indicator
stops blinking, and the base display shows ALL HANDSET
DEREGISTERED for five seconds to confirm that all handsets are de-
registered. Then the base returns to standby m ode, and each handset
displays REGISTER HANDSET?
22
Download from Www.Somanuals.com. All Manuals Search And Download.
WALKIE TALKIE
This feature allows a pair of handsets to be used like walkie talkies
(electrical power to the base unit is not required for walkie talkie
operation). This setting m ay be m ade with the handset only.
1. Make sure your handset is at the m ain m enu. If your handset is not in
the m ain m enu, press the MENU soft key.
2. Press the cid/vol (up or down arrow) button to m ove the arrow to
WALKIETALKIE.
DEREGISTRATION
WALKIE TALKIE
OK
EXIT
3. Press the OK soft key and WALKIETALKIE ENABLE? shows in the
display.
WALKIE TALKIE
ENABLE ?
OK
EXIT
4. Press the OK soft key and WALKIETALKIE ENABLED followed by WALKIE
TALKIE HANDSET# shows in the display.
WALKIE TALKIE
HANDSET 1 EXIT
WALKIE TALKIE
ENABLED
NOTE: Both handsets must be in walkie talkie mode to send and receive.
5. Press the page/int button, and then enter the handset num ber/extension
you want to call. The selected handset is paged. When the page/int
button on the receiving handset is pressed, and the page is answered,
the walkie talkie feature is activated between both handsets. Both
handsets display WALKIETALKIE WITH HANDSET #.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
WALKIE TALKIE
HANDSET #
EXIT
WALKIE TALKIE
EXTENSION ?
EXIT
PAGING
HANDSET #
EXIT
WALKIE TALKIE
WITH HANDSET EX#IT
MUTE
6. When your conversation is finished, both the sending and receiving
handsets m ay press the EXIT soft key to disable the walkie talkie feature
and return to the walkie talkie standby m ode.
WALKIE TALKIE
WALKIE TALKIE
DISABLED
HANDSET #
EXIT
7. P ress EXIT key again will disable the walkie talkie and go back to
handset standby m ode. WALKIETALKIE DISABLED shows briefly in the
display.
NOTE: When two handsets are in walkie talkie mode, they are isolated from
the base and cannot receive pages or dial out until the walkie talkie is disabled.
NAME
HANDSET 1
MENU
DIR
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME OF DAY
This setting m ay be m ade with the base only.
1. Make sure your base is in the m enu m ode. If your base is not in the
m enu m ode, press the MENU soft key.
2. Press the CID (up or down arrow) to scroll to TIME.
TONE/PULSE
TIME
OK
EXIT
3. Press the OK soft key and SETTIME - - : - - AM PM shows in the display.
SET TIME
_ _ : _ _ AM PM
OK
EXIT
4. Use the touch tone pad to enter the current tim e. The arrow
autom atically m oves to the AM field. Press the CID (up or down arrow)
button to m ove the arrow to PM. The default setting is 12:00 AM.
12;34 PM
5. Press the OK soft key to save your selection and return to the m ain
m enu. The current tim e displays for two seconds.
TONE/PULSE
TIME
OK
EXIT
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DEFAULT
As you becom e fam iliar with this system , you m ay prefer to use the
system ’s original settings. Follow the steps below to return to the factory
default settings.
1. Make sure your handset or base is in m enu m ode. If your handset or
base is not in the m enu m ode, press the MENU soft key.
2. Press the cid/vol (up and down arrow) button on the handset or CID (up and
down arrow) button on the base to m ove the arrow to DEFAULT SETTING.
DEFAULT SETTING
LANGUAGE
OK
EXIT
3. Use the touch tone pad on your handset or base to enter 1YES or 2NO,
or use the cid/vol (up or down arrow) button on your handset or the CID
(up or down arrow) button on your base to m ove the arrow to your
selection. 2NO is the default setting.
DEFAULT SETTING
OK1 YES 2NO EXIT
NOTE: If you choose YES all settings in the programmable menu return to the
factory default settings.
4. Press the OK soft key to save your selection, and return to the m ain
m enu. The default setting you choose shows on the display for two
seconds.
DEFAULT SETTING
NO
DEFAULT SETTING
LANGUAGE
OK
EXIT
HANDSET & BASE DISPLAY
HANDSET & BASE DISPLAY
26
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Press the EXIT soft key once to keep the previous setting and return
to the main menu.
BASIC OPERATION
SPEAKERPHONE
For hands-free operation and convenience, your dual-handset system is
equipped with a speakerphone.
For best speakerphone perform ance, avoid the following:
•
Areas with high background noise. (The m icrophone m ight pick up
these sounds.)
•
•
Surfaces affected by vibration.
Recessed areas such as in a corner, under a cupboard, or next to a
cabinet, which can generate an echo effect.
Note the following guidelines when using the speakerphone:
•
The speakerphone works sim ilar to a two-way radio. You can only listen
or talk at one tim e.
•
Stay reasonably close to the phone so that you can be clearly heard by
the person to whom you are talking.
NOTE: Only one-way conversation is possible in speakerphone mode. When
you are speaking, you are transmitting. When you are listening, you are
receiving. You can’t do both at the same time. The phone automatically
switches between transmitting and receiving depending on the level of the
voice or the room noise detected by the speakerphone microphone.
CHARGE INDICATOR
When the charge indicator is lit, the handset is correctly seated in the
cradle and is charging. The indicator flashes when the base is paged, when
the base pages the handset, or when you receive an incom ing call.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING A CALL
HANDSET
1. Pick up the handset and press the talk/callback button on the handset.
Listen for a dial tone.
2. Dial the desired num ber, or dial the num ber first then press the talk/
callback button.
3. When finished, press the talk/callback button again to hang up.
SPEAKERPHONE
1. Press the callback/speaker button on the base. You will hear a dial tone.
2. Dial the num ber you wish to call. Or, you can dial the num ber and then
press the speaker/callback button.
3. When finished, press the callback/speaker button to hang up.
ANSWERING A CALL
HANDSET
1. When the phone rings, press the talk/callback button on the handset.
2. When finished, press the talk/callback button again to hang up.
SPEAKERPHONE
1. When the phone rings, press the speaker/callback button to answer a call.
2. When finished press callback/speaker to hang up.
NOTE: If you are using the handset and want to switch to the speakerphone,
press the callback/ speaker button. The speakerphone indicator turns on. To
continue using the handset, press the talk/ callback button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL TIMER
After you press talk/callback on the handset or speaker/callback on the
base, the built-in call tim er shows in the display and counts the length of
tim e of the call in m inutes and seconds.
AUTO STANDBY
Placing the handset in the base cradle or handset charge cradle while the
handset is off the hook (during a call) autom atically hangs up the handset.
RINGER VOLUME SWITCH
HANDSET
1. Press the ringer button and the current ringer setting shows in the display.
RINGER ON
OK1 ON 2 OFF
EXIT
2. Use the touch tone pad on your handset to enter 1 ON or 2 OFF, or use
the cid/vol (up and down arrow) to scroll to your selection.
3. Press the OK soft key to save your selection, and you will hear a
confirm ation tone and the ringer setting displays for two seconds.
RINGER ON
NOTE: If you turn the ringer OFF, the ringer off icon
shows in the display.
NAME
HMAENNDUSET 1
DIR
29
Download from Www.Somanuals.com. All Manuals Search And Download.
BASE
1. Press the ringer button and the current ringer setting shows in the display.
RINGER HIGH
1 HI 2 LOW 3 OEFXFIT
OK
2. Use the touch tone pad on your handset to enter 1HI, 2LOW, or 3OFF, or
use the CID (up and down arrow) to scroll to your selection.
3. Press the OK soft key to save your selection, and the ringer setting
shows in the display for two seconds then returns to standby m ode.
RINGER LOW
01:15 PM
MENNU EW CALL 00
DIR
FLASH/ CALL WAITING
If you subscribe to the com bined Call Waiting Caller ID service from your local
telephone com pany, you will receive Caller ID inform ation (if available) on Call
Waiting calls. During a phone call you will hear a beep, which indicates
another call is waiting on the line, and Caller ID inform ation shows in the
handset display.To connect to the waiting call, press the flash button on the
handset and your original call is put on hold.You m ay switch back and forth
between the two calls by pressing the flash button.
TIP: Don’t press the talk/ callback button on the handset or the speaker/
callback button on the base to activate a custom calling service, such as call
waiting, or you’ll hang up the phone.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
LAST NUMBER REDIAL
To quickly redial the last num ber you dialed:
1. Press the talk/callback button on the handset or the speaker/callback
button on the base.
2. Press the redial button.
-OR-
3. Press the redial button first then press the talk/callback button or the
speaker/callback button. If you get a busy signal and want to keep
dialing the num ber, press the redial button to quickly redial the num ber.
HOLD
Press the HOLD soft key on the handset or base to put a call on hold. LINE
ON HOLD shows in the handset display.
LINE ON HOLD
TALK 00:10 VOL 2
CONF TRANS
EXIT
Your phone stays on hold until you press the EXIT soft key and release the
line, or press the talk/callback button to return to standby m ode. If you
continue the call on a separate extension phone, or other registered
handset your cordless phone releases the line to the extension phone.
If the handset with the call on hold is placed back on the cradle, the holding
call is transferred to the base speakerphone and the handset returns to
standby m ode.
EXIT
Press the EXIT soft key to end an operation, such as HOLD or
TRANSFER. The display shows LINE ACTIVE for two seconds then
returns to the TALK m ode.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
LINE ACTIVE
TALK 00:05 VOL 2
MUTE
HOLD
DIR
PAGING THE HANDSET
This feature helps you locate a m isplaced handset. To send and receive
pages, all handsets m ust be registered. If your handsets are not registered
follow the instructions in the Handset Registration section of this m anual.
PAGING FROM THE BASE OR HANDSET
Make sure the phone is OFF (not in talk m ode).
1. Press the page/int button the handset or base.
PAGING
EXTENSION ?EXIT
2. Use the touch tone pad on your handset or base to select 1 or 2. PAGING
EXTENSION shows in the display.
NOTE: Press the * key to page all registered handsets or press the 0 key to
page the base.
3. The receiving handset or base starts paging.
PAGING
HANDSET 2
EXIT
SENDING HANDSET
32
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGING FROM
HANDSET 1
RECEIVING HANDSET
When the talk/callback or speaker/callback or page/int on the receiving
handset or base is pressed the page is answered. If the page is not answered
after two m inutes, NO ANSWER shows in the display of sending handsets or
base and the page is cancelled.The unit returns to standby m ode.
NOTE: If name has been assigned to the handset during registration, then the
name will be displayed instead of handset number when paging starts.
NOTE: To cancel the page, press the EXIT soft key or the page/ int button.
TRANSFERRING CALLS
This feature lets you transfer calls between handsets or the base in talk
m ode.
1. Press the HOLD soft key to put the call on hold.
TALK 00H:1O0LDVOL 2
MUTE
DIR
2. Press the TRANS soft key.
LINE ON HOLD
TALK 00:10 VOL 2
CONF TRANS EXIT
LINE ON HOLD
EXTENSION ?
EXIT
33
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Enter the handset num ber you want to transfer the call to, and the
receiving handset is paged.
PAGING FROM
HANDSET 2
RECEIVING HANDSET
PAGING/LINE ON HOLD
STEVE
EXIT
SENDING HANDSET
NOTE: If the page isn’t answered, press the EXIT soft key or the page/ int
button to cancel the transfer.
When the page/int or talk/callback button is pressed on the receiving
handset, the unit goes into intercom m ode. When the talk/callback button
on the sending handset is pressed, the call is transferred.
After you select the station you want to transfer the call to, press the talk/
callback button to hang up your station. If the other station does not take
the call within 30 seconds, the call is transferred back to your station.
MUTE
To have a private, off-line conversation use the m ute feature. The party on
the other end of the line cannot hear you, but you can still hear them .
1. While having a phone conversation you m ay press the MUTE soft key.
MUTE ON shows in the display.
MUTE ON
TALK 00:H10OLDVOL 2
MUTE
DIR
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the MUTE soft key to cancel m ute and return to your phone
conversation.
TALK 00:H0O5LDVOL 2
MUTE
DIR
TEMPORARY TONE DIALING
This feature is useful only if you use pulse dialing service. Tem porary tone
dialing enables pulse (rotary) service phone users to access touch-tone
services offered by banks, credit card com panies, etc. For exam ple, when
you call your bank you m ay need to enter your account num ber. Using the
tem porary tone feature allows you to tem porarily switch to touch tone
m ode so you can enter and send your num ber.
1. Dial the telephone num ber and wait for the line to connect.
2. When your call is answered, press the *tone button on your handset
num ber pad to tem porarily change from pulse dialing to tone dialing.
3. Follow the autom ated instructions to get the inform ation you need.
4. Hang up the handset and the phone autom atically returns to pulse
(rotary) dialing m ode.
CORDLESS HANDSET VOLUME CONTROL
When the cordless handset is ON (in talk m ode) adjust the receiver volum e
by pressing the cid/vol (up or down arrow) button on the cordless handset.
There are four volum e levels, and each press of the cid/vol (up or down)
button adjusts the receiver volum e by one level.
SPEAKERPHONE VOLUME CONTROL
When the speakerphone is ON, adjust the volum e by pressing the volum e
up or down arrow buttons on the base. When the m axim um or m inim um
volum e level is reached the phone beeps twice.
NOTE: You may also adjust the volume during walkie talkie mode, intercom
mode, and conference mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERCOM
The intercom feature allows you to have an unlim ited-duration, two-way
conversation between two handsets or the base and a handset.
MAKING AN INTERCOM CALL
1. Make sure the phone is OFF (not in talk m ode).
2. Press the page/int button on the handset or base. PAGING EXTENSION
shows in the display.
PAGING
EXTENSION ?
EXIT
3. Enter the desired handset num ber or base (enter 0) you want to
intercom with. The receiving party is paged.
NOTE: To cancel the page, press the page/ int button or the EXIT button.
PAGING
PAGING FROM
THE RECEIVING PARTY
HANDSET 1
HANDSET 2
EXIT
THE SENDING PARTY
4. Wait for the receiving party to answer and activate the intercom feature.
The following displays when the intercom is setup:
INTERCOM
INTERCOM
HANDSET 2
HANDSET 1
MUTE
EXIT
MUTE
EXIT
5. When finished, press the EXIT soft key or the page/int button on either
handset to deactivate the intercom .
36
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE : During the intercom, if a handset is assigned a name, that name is
displayed instead of handset number.
RECEIVING AN INTERCOM CALL
When an intercom call is received, the handset or base beeps. To answer
the intercom call, press the page/int button.
RECEIVING AN EXTERNAL TELEPHONE CALL DURING AN INTERCOM CALL
BETWEEN HANDSETS
If you receive a telephone call during an intercom call, both users are
alerted with a ringing tone. Press the talk/callback button on the handset to
end the intercom . Press the talk/callback button again to take the external
telephone call.
BETWEEN BASE AND HANDSET
If you receive a telephone call during an intercom call, the intercom
between the handset and the base autom atically ends and the unit rings.
Press the talk/callback on the handset or the speaker/callback button on the
base to take the external telephone call.
USING INTERCOM OR CONFERENCE WITH EXTERNAL CALLS
During an external telephone call, you m ay page other handsets and have off-
line, private intercom conversations between an external caller and the
handsets, or you m ay have a 3-way conference with external line and another
handset or the base.
1. During an external call, press the HOLD soft key on the handset to place
the external call on hold. LINE ON HOLD shows in the sending handset
or base display.
LINE ON HOLD
TALK 00:10 VOL 2
CONF TRANS EXIT
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the CONF soft key on your handset or base. LINE ON HOLD
EXTENSION? shows in the display.
LINE ON HOLD
EXTENSION ?
EXIT
3. Enter the desired handset num ber to select the base or the handset
num ber you want to conference with. The receiving party is paged.
PAGING FROM
PAGING/LINE ON HOLD
HANDSET 1
HANDSET 2
EXIT
SENDING HANDSET
RECEIVING HANDSET
4. The receiving handset or base m ust press the page/int button to answer
the intercom , then both intercom users m ay speak privately. The
external caller cannot hear the intercom conversation.
LINE ON HOLD/INTERCOM
HANDSET 2
INTERCOM
HANDSET 1
MUTE
EXIT
MUTE
EXIT
SENDING HANDSET
RECEIVING HANDSET
5. Either sending or receiving party m ay press the form at/conference
button to start the 3-way conference.
NOTE: Press the EXIT soft key on either handset to cancel the intercom call
and let the sending party continue to talk to the external party. Or the calling
party may press the talk/ callback button to transfer the call to the receiving
party who may speak to the external caller independently.
NOTE: A handset or the base can enter conference directly by pressing talk/
callback on the base while the other handset or the base is on an external call.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY
The handset and base each have their own separate m em ory dialing
storage areas. Fifty 15-character nam es and 24-digit telephone num bers
can be stored in the handset m em ory. Fifty 15-character nam es and 24-
digit telephone num bers can be stored in the base m em ory.
STORING A NAME AND NUMBER IN MEMORY
1. Make sure the phone is OFF (not in talk m ode).
2. Press the DIR soft key.
NAME
HANDSET 1
MENU
DIR
3. Press the desired m em ory location button (01 through 50) or, use the cid/
vol (up or down arrow) button on handset or CID up or down arrow on the
base to select the m em ory location. If the m em ory location is occupied, the
m em ory location and stored nam e and num ber appear in the display. If the
m em ory location is em pty, EMPTY shows in the display.
#
-
0
-
3
MEMO
SELE0C1T-50MEMORY
EXIT
#
MEMO
* * EMDPETLY * *
EDIT
EXIT
4. Press the EDIT soft key. The display shows ENTER NAME.
#
0
3
MEMO
ENTEDRELNAME
OK
EXIT
39
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Use the touch tone pad on your handset or base to enter a nam e (up to
15 characters). More than one letter is stored in each of the num ber
keys. For exam ple, to enter Bill Sm ith, press the 2 key twice for the letter
B. Press the 4 key 3 tim es for the letter I. Press the 5 key 3 tim es for the
letter L. Wait for 1 second. Press the 5 key 3 tim es for the second letter L,
and press the 1 key to insert a space between the first and last nam e.
Press the 7 key 4 tim es for the letter S; press the 6 key once for the letter
M; press the 4 key 3 tim es for the letter I; press the 8 key for the letter T;
press the 4 key twice for the letter H.
6. Press the OK soft key to confirm your selection. The display shows
ENTERTEL NUMBR.
#
0
3
MEMO
ENTER TEL NUMBR
OK
DEL
EXIT
7. Use the touch tone pad on your handset or base to enter the area code
followed by the telephone num ber (up to 24 digits, including pauses)
and press the OK soft key again to save your selection. The unit beeps to
confirm .
NAME
HAMNEDNSUET 1
DIR
8. To enter another nam e and num ber in a different m em ory location,
please follow step 1 and repeat the process.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
STORING A REDIAL NUMBER
1. Make sure the phone is OFF (not in talk m ode).
2. Press the DIR soft key.
3. Press any num ber key (01-50) to store the phone num ber in that
m em ory location, or press the cid/vol (up and down arrow) button on
the handset or CID (up and down arrow) button on the base to select the
m em ory location.
4. Press the EDIT soft key and ENTER NAME shows in the display.
5. Use the touch tone pad on your handset or base to enter the nam e, then
press the OK soft key and ENTERTEL NUMBR shows in the display.
6. Press the redial button to display the redial num ber.
7. P ress the OK soft key again to confirm .
NOTE: If the redial number has more than an 24 digits, the redial number
cannot be stored in memory.
INSERTING A PAUSE IN THE DIALING SEQUENCE
If a pause is needed to wait for a dial tone press the # pause button on
the num ber pad to insert a delay in dialing sequence of a stored
telephone num ber (for exam ple, after you dial 9 for an outside line, or
wait for a com puter access tone.) Each pause counts as one digit in the
dialing sequence.
REVIEWING, CHANGING OR DELETING STORED NUMBERS
TO REVIEW:
1. Make sure the phone is OFF (not in talk m ode).
2. Press DIR soft key.
NAME
HAMNEDNSUET 1
DIR
41
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the cid/vol (up or down arrow) button on the handset or CID (up or
down arrow) button on the base to scroll through the stored num bers.
Or use the touch tone pad on your handset or base to enter the m em ory
location num ber.
#
0
3
MEMO
317 - 123 - 4567
PETER CHAN
EDIT DEL
EXIT
TO CHANGE:
Use the sam e procedure to change a stored num ber as you do to store a
num ber - instead just replace one stored phone num ber with a different one.
TO DELETE:
1. Make sure the phone is OFF (not in talk m ode).
2. Press DIR soft key
3. Press the cid/vol (up or down arrow) button on the handset or CID (up or
down arrow) button on the base to scroll to a desired record.
4. When the record shows in the display, press the DEL soft key to m ark
the record for deletion. The display shows DELETE?
#
0
3
MEMO
317 - 123 - 4567
DELETE ? EXIT
OK
5. Press the OK soft key a second tim e to delete the record. The display
shows DELETED for two seconds. You will hear a confirm ation tone.
* * DELETED * *
42
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: If you don’t want to change or delete a number, simply press EXIT
soft key, or wait for one minute to exit the review mode.
DIALING A STORED NUMBER
HANDSET
Make sure the phone is ON by pressing the talk/callback button.
1. Press the DIR soft key.
2. Enter the m em ory location num ber (01-50) for the desired m em ory
location. The num ber will be dialed autom atically.
-OR-
1. Make sure the phone is OFF (not in talk m ode).
2. Press the DIR soft key.
3. Press the num ber key (01-50) for the desired m em ory location or use the
cid/vol (up or down arrow) button to scroll through m em ory until the
desired num ber displays.
4. Press the talk/callback button. The num ber dials autom atically.
BASE
Make sure the phone is ON by pressing the pressing the speaker/callback
button.
1. Press the DIR soft key.
2. Press the num ber key (01-50) for the desired m em ory location. The
num ber dials autom atically.
-OR-
Make sure the phone is OFF (not in talk m ode)
1. Press the DIR soft key.
2. Press the num ber key (01-50) for the desired m em ory location, or use
the CID (up or down arrow) button to scroll through m em ory until the
desired num ber displays.
3. Press the speaker/callback button. The num ber dials autom atically.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAIN DIALING FROM MEMORY
Use this feature to m ake calls that require a sequence of num bers, such as
a calling card num ber used for a frequently called long distance num ber.
The following exam ple shows how you can store each part of the long
dialing sequence and use chain dialing to m ake a call through a long
distance service:
1. Make sure the phone is ON .
The Num ber
For Mem ory Location
Long Distance Access Num ber
Authorization Code
7
8
9
Frequently called long distance num ber
2. Press DIR soft key and then press 07.
3. When you hear the access tone, press DIR soft key, and then press 08.
4. At the next access tone, press DIR soft key then press 09.
CALLER ID (CID)
Caller ID (CID) is a service available from your local telephone com pany.
For Caller ID to work on this system , you m ust subscribe to Caller ID
service. To receive Caller ID inform ation for a Call Waiting call, you m ust
subscribe to the com bined Call Waiting Caller ID service.
AM
#
CALL
NEW
18:88 88 88 88 88
PM
REPT
MEMO
000000000000000
000000000000000
000000000000000
44
Download from Www.Somanuals.com. All Manuals Search And Download.
When your telephone rings, and you are subscribed to Caller ID Call
Waiting service, you will receive inform ation (if available) transm itted by
your local telephone com pany. You will also receive Caller ID inform ation
from Call Waiting calls. If you receive an incom ing call and you are already
on the phone, a beep indicates the presence of a Call Waiting Call on the
line, and Caller ID inform ation for the Call Waiting call shows on the
display. This inform ation m ay include the phone num ber, date and tim e; or
the nam e, phone num ber, and date and tim e.
RECEIVING AND STORING CALL RECORDS
When you receive a call, Caller ID inform ation is transm itted by the phone
com pany to your Caller ID telephone between the first and second ring.
The Caller ID inform ation appears on the display while the phone rings,
giving you a chance to m onitor the inform ation and decide whether or not
to answer the call.
If you are not at hom e or cannot answer, your telephone’s Caller ID
m em ory autom atically stores the call num ber, date, tim e, phone num ber,
and nam e for the 40 m ost recent calls received so you can see who called
while you were unavailable. Caller ID records are stored sequentially, in
the order they are received. When the 41st call is received, the oldest
Caller ID record is autom atically deleted.
You m ay review the stored inform ation for the m ost recent 40 calls at any
tim e. Calls received since your last review show as NEW in the display.
REVIEWING CALL RECORDS
As calls are received and stored, the display is updated to let you know
how m any calls have been received.
1. Press the cid/vol (up arrow) button to review oldest call and scroll toward
the m ost recent calls (higher num bers). When you reach the newest call,
the display shows END OF LIST.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the cid/vol down arrow button on the handset or CID (down arrow)
button on the base to review the newest call and scroll to older calls (lower
num bers). When you reach the oldest call, the display shows END OF LIST.
As you review calls, the display shows you the following inform ation for
each call:
•
•
•
The telephone num ber of the caller.
The num ber of the call, with regard to the order received.
The nam e of the caller, if this service is available in your area.
NOTE: If a name is received which exceeds 15 characters, the extra characters
are removed.
•
•
Tim e and date the call was received.
NEW appears for all calls that have not been reviewed.
NOTE: Check with your local phone company regarding name service
availability.
TRANSFERRING CID RECORDS TO MEMORY
You m ay transfer a Caller ID record to your phone ’s m em ory.
NOTE: It is important that you format CID records correctly before storing in
memory. It is not possible to reformat CID records stored in memory.
1. Use the cid/vol (up or down arrow) button on the handset or CID (up or
down arrow) button on the base to scroll to the desired CID record.
AM
NEW CALL
#
9:58
11/24
01
317 - 123 - 4567
PETER CHAN
SAVE DEL
EXIT
2. Press the SAVE soft key.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the desired m em ory location button. Exam ple, press the num ber
01 key to store the record in m em ory location 1. If the m em ory location
is occupied and, you want to replace it, you m ust confirm the
replacem ent by pressing the OK soft key.
#
MEMO
--
SELECT MEMORY
01-50
EXIT
#
MEMO
01
765-4321
REPLACE MEMO?
OK
EXIT
NOTE: Press EXIT soft key once to keep previous the setting and return to the
Caller ID menu. Or, press and hold the EXIT soft key on handset to return to
standby mode.
DIALING A CALLER ID NUMBER
While reviewing Caller ID records, you m ay call the caller phone num ber
showing in the display.
1. Make sure the phone is OFF (not in talk m ode).
2. Press cid/vol (up or down arrow) button on the handset or CID (up or
down arrow) button on the base until the desired call record is
displayed. Depending on (a) how the incom ing phone num ber was
form atted when it was received, and (b) whether or not you previously
pre-program m ed your local area code into m em ory, you m ay need to
adjust the form at of the incom ing caller ’s stored phone num ber before
dialing it back. The form at button lets you change the form at of the
displayed num ber.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Available form ats include:
Num ber of digits
Explanation
Exam ple
Eleven digits
long distance code “1 ”
+3- digit area code +7-digit
telephone num ber.
1-317-888-8888
Ten digits
3-digit area code +7-digit
telephone num ber.
317-888-8888
888-8888
Seven digits
7-digit telephone num ber.
NOTE: If the phone company does not supply all ten digits of an incoming
number, you will not be allowed to adjust the format of that number.
3. If the num ber does not dial as shown, press the form at/conference
button on handset or form at/conf on the base. Repeat if necessary, until
the correct num ber of digits show in the display.
4. Press the talk/callback button on the handset or speaker/callback on the
base. The num ber dials autom atically.
NOTE: If the number is corrupted, such as a number in a name or an
alphabetical character in a number, an error tone sounds from the handset or
base and the number cannot be dialed.
DELETING THE CALLER ID RECORD SHOWING IN THE DISPLAY
To delete only the record showing in the display:
1. Make sure the phone is OFF (not in talk m ode).
NAME
HAMNEDNSUET 1
DIR
48
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the cid/vol (up or down arrow) button on the handset or CID (up or
down arrow) button on the base to display the desired Caller ID record.
AM
NEW CALL
#
9:58
11/24
01
12 34567890 1 2 34 5
STEVE
SAVE DEL
EXIT
3. Press DEL soft key. The display shows DELETE CALL ID?
DOEKLETE CALL ID?
EXIT
4. Press OK soft key to erase the record.The display shows DELETED, for two
seconds, and confirm s the deletion.You will hear a confirm ation tone.
* *DELETED * *
NOTE: Press EXIT soft key once to return to the CID review menu. Or, press
and hold the EXIT soft key on the handset to return to standby mode.
DELETING ALL CALLER ID RECORDS
To delete all of the Caller ID records in m em ory:
1. Make sure the phone is OFF (not in talk m ode).
NAME
HAMNEDNSUET 1
DIR
49
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the cid/vol (up or down arrow) button on the handset or CID (up or
down arrow) button on the base to display any Caller ID record.
AM
NEW CALL
#
9:58
11/24
01
12 34567890 1 2 34 5
NAME
SAVE DEL
EXIT
3. Press and hold the DEL soft key for two seconds. The display shows
DELETE ALL?
DELETE ALL ?
OK
EXIT
4. Press the OK soft key to erase all CID records from m em ory. The display
shows NO CALLS. You will hear a confirm ation tone.
NO CALLS
NOTE: Press the EXIT soft key once to return to the CID review menu. Or,
press and hold the EXIT soft key to return to standby mode.
CALLER ID ERRORS
If there is an error in the transm ission of inform ation to your Caller ID
phone, ERROR or INCOMPLETE DATA shows in the display. If you are not
subscribed to Caller ID service or it is not working properly, NO DATA
shows in the display.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
REPLACING THE BATTERY
CAUTION: To reduce the risk of fire or personal injury, use only the
battery 5-2459 that is compatible with this unit.
Make sure the telephone is OFF (not in talk m ode)
before you replace battery.
1. Rem ove the battery com partm ent cover.
2. Disconnect the cord attached to the battery pack
from the jack inside the battery com partm ent and
rem ove the battery pack from the handset.
3. Insert the new battery pack and reconnect the
battery plug.
4. Put the battery com partm ent cover back on.
5. Place handset in the base to charge. If you don’t
charge the handset battery properly (for 12 hours)
when you first set up the phone and/or when you
install a new battery pack, the battery’s long-term
perform ance will be com prom ised.
BATTERY SAFETY PRECAUTIONS
•
Do not burn, disassem ble, m utilate, or puncture. Like other batteries of
this type, toxic m aterials could be released which can cause injury.
•
•
Keep batteries out of the reach of children.
Rem ove batteries if storing over 30 days.
NOTE: The RBRC seal on the battery used in your ATLINKS
USA, Inc. product indicates that we are participating in a
program to collect and recycle Nickel Cadmium batteries
throughout the United States. Please call 1-800-8-BATTERY for
information or contact your local recycling center.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADSET AND BELT CLIP INSTALLATION
CONNECTING AN OPTIONAL HEADSET TO THE HANDSET
Each handset m ay be used with an optional headset for hands free operation.
1. Rem ove the rubber cap covering the headset jack.
2. Connect the headset to the headset jack on the side of the handset. The
handset receiver and speakerphone m icrophone are disabled when the
headset is connected.
3. Adjust the headset to rest com fortably on top of your head and over
your ear. Move the m icrophone to approxim ately two to three inches
from your m outh.
4. Press the talk/callback button on the handset to answer a call or m ake
calls with the headset.
5. To return to norm al operation, unplug the headset from the jack.
ATTACHING THE BELT CLIP
To attach the belt clip, insert the sides of the belt clip into the slots on each
side of the handset. Snap the ends of the belt clip into place.
Slot for
belt clip
Slot for
belt clip
Headset
jack
Headset
plug
52
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY MESSAGES
The following indicators show the status of a m essage or of the unit.
INCOMPLETE DATA
ENTER NAME
DELETE ALL?
DELETE CALL ID?
DELETE?
Caller inform ation has been interrupted during
transm ission or the phone line is excessively noisy.
Prom pt telling you to enter the nam e in one of the
50 m em ory locations.
Prom pt asking if you want to erase all Caller ID
records.
Prom pt asking if you want to erase the current
Caller ID record that is shown on the display.
Prom pt asking if you want to erase one of the 50
num bers stored in the phone's outgoing m em ory.
END OF LIST
NEW
Indicates that there is no additional inform ation in
Caller ID m em ory.
Indicates call or calls have not been reviewed.
UNKNOWN CALLER The incom ing call is from an area not serviced by
Caller ID or the inform ation was not sent
PAGING
Som eone has pressed the page/int button on the
base or handset.
BLOCKED NUMBER
REPT
The person is calling from a num ber that has been
blocked from transm ission.
Repeat call m essage. Indicates that a new call from
the sam e num ber was received m ore than once.
SEARCHING
NO DATA
Handset is searching the base.
No Caller ID inform ation was received.
OUT OF RANGE
Handset is too far away from the base. Move closer to
the base.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDSET SOUND SIGNALS
Signal
Meaning
A long warbling tone (with ringer on)
Three short beeps
Signals an incom ing call
Page signal
One short beep (every 7 seconds)
Low battery warning
TROUBLESHOOTING GUIDE
TELEPHONE SOLUTIONS
No dial tone
•
•
•
Check or repeat installation steps.
Make sure base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the
m odular phone jack.
•
•
Connect another phone to the sam e jack; if there is still no dial tone, the
problem m ight be your wiring or local service.
The cordless handset m ay be out of range of the base. Move closer to
the base.
•
•
•
Make sure the battery is properly charged (12 hours).
Make sure the battery pack is installed correctly.
Did the handset beep when you pressed the talk/callback button? The
battery m ay need to be charged.
•
Place handset in charge cradle for at least 20 seconds to reset.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial tone is OK but can’t dial out
•
Make sure the TONE/PULSE setting on the handset is set to the type of
phone service you are subscribed to.
Handset/Base does not ring
•
•
•
•
Make sure the handset ringer is turned on and the base ringer is
program m ed to HIGH.
The cordless handset m ay be out of range of the base. Move closer to
the base.
You m ay have too m any extension phones on your line. Try unplugging
som e phones.
Check for dial tone.
You experience static, noise, or fading in and out
•
•
•
The cordless handset m ay be out of range of the base. Move closer to
the base.
Relocate the base. Make sure base is not plugged into an outlet with
another household appliance.
Charge the battery.
Unit beeps
•
Place the handset in the cradle for 20 seconds. If it still beeps, charge
battery for 12 hours.
•
Clean charging contacts on cordless handset and charger with a soft
cloth or an eraser.
•
•
See solutions for “No dial tone”.
Replace the battery.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Charge indicator on the base flashes
•
Provided your phone com pany offers voice m essage service and you
subscribe to it, the charge indicator on the base flashes when the phone
is not in use to indicate there is a m essage waiting. It stops flashing
after the m essage has been reviewed.
Mem ory Dialing doesn't work
•
•
Did you program the m em ory location keys correctly?
Did you follow proper dialing sequence?
Unit locks up and no com m unication between the base and cordless
handset
•
Unplug the AC power supply from the wall outlet and the back of the
base. Rem ove the handset battery. Wait for 30 seconds and plug the
power adapter back into the base and wall outlet. Reconnect the battery
and charge for 12 hours. Re-register the handset.
CALLER ID SOLUTIONS
No Display
•
•
Charge or replace the battery.
Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the AC power supply from the base and reconnect it.
Caller ID Error Message
•
The unit displays this m essage if it detects anything other than valid
Caller ID inform ation during the silent period after the first ring. This
m essage indicates the presence of
noise on the line.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
No Caller ID
•
You m ust be subscribed to Caller ID service from your local telephone
com pany to receive Caller ID records.
BATTERY SOLUTIONS
If you experience any of the following problem s, even after fully
recharging the battery, you m ay need to replace the battery pack:
•
•
•
•
Short talk tim e
Poor sound quality
Lim ited range
Charge indicator fails to light
GENERAL PRODUCT CARE
To keep your unit working and looking good, follow these guidelines:
•
Avoid putting the phone near heating appliances and devices that
generate electrical noise (for exam ple, m otors or fluorescent lam ps).
•
•
DO NOT expose to direct sunlight or m oisture.
Avoid dropping the handset, as well as other rough treatm ent to
the phone.
•
•
Clean the phone with a soft cloth.
Never use a strong cleaning agent or abrasive powder because this will
dam age the finish.
•
•
Retain the original packaging in case you need to ship the phone at a
later date.
Periodically clean the charge contacts on the handset and base with a
clean pencil eraser.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUSES OF POOR RECEPTION
•
•
•
•
Alum inum siding.
Foil backing on insulation.
Heating ducts and other m etal construction that can shield radio signals.
You’re too close to appliances such as m icrowaves, stoves,
com puters, etc.
•
•
•
•
•
•
Atm ospheric conditions, such as strong storm s.
Base is installed in the basem ent or lower floor of the house.
Base is plugged into AC outlet with other electronic devices.
Baby m onitor is using the sam e frequency.
Handset battery is low.
You’re out of range of the base.
SERVICE
If trouble is experienced with this equipment, for repair or warranty information,
please contact customer service at 1-800-448-0329. If the equipment is causing
harm to the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
This product m ay be serviced only by the m anufacturer or its authorized
service agents. Changes or m odifications not expressly approved by
ATLINKS USA, Inc. could void the user’s authority to operate this product.
For instructions on how to obtain service, refer to the warranty included in
this guide or call custom er service at 1-800-448-0329.
Or refer inquiries to:
ATLINKS USA, Inc.
Manager, Consum er Relations
P O Box 1976
Indianapolis, IN 46206
Attach your sales receipt to the booklet for future reference or jot down the
date this product was purchased or received as a gift. This inform ation will
be valuable if service should be required during the warranty period.
Purchase date ________________ Nam e of store ________________________
58
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
A
E
Equipm ent Approval Inform ation 2
Accessory Order Form 61
Answering a Call 28
Area Code 15
Exit 31
F
Auto Standby 29
Features 5
B
Flash/Call Waiting 30
Base Layout 7
Basic Operation 27
Before You Begin 8
G
General Product Care 57
Global Deregistration 22
C
H
CallTim er 29
Handset and Charge Cradle Layout 7
Handset De-registration 21
Handset Registration 18
Handset Sound Signals 54
Headset and Belt Clip Installation 52
Hearing Aid Com patibility (HAC) 2
Hold 31
Caller ID 44
Caller ID Errors 50
Causes of Poor Reception 58
Chain Dialing from Mem ory 44
Connecting an Optional Headset to the
Handset 52
Connecting the AC (Electrical) Power 10
Connecting the Telephone Line 10
Cordless Handset Volum e Control 35
I
Im portant Installation Guidelines 9
Im portant Installation Inform ation 9
D
Inserting a Pause in the Dialing
Sequence 41
Default 26
Deleting All Caller ID Records 49
Installing the Handset Battery 11
Installing the Phone 10
Intercom 36
Deleting the Caller ID Record Showing in
the Display 48
Deleting the Current Caller ID Record 48
Dialing a Caller ID Num ber 47
Dialing a Stored Num ber 43
Display Contrast 13
Interference Inform ation 2
Introduction 5
L
Display Messages 53
Language 12
Last Num ber Redial 31
Lim ited Warranty 62
59
Download from Www.Somanuals.com. All Manuals Search And Download.
M
T
Making a Call 28
Making an Intercom Call 36
Mem ory 39
Telephone Jack Requirem ents 8
Telephone Setup 12
Tem porary Tone Dialing 35
Tim e of Day 25
Mute 34
Tone/Pulse 17
P
Transferring Calls 33
Transferring CID Records to Mem ory 46
Troubleshooting Guide 54
Paging from the Base or Handset 32
Paging the Handset 32
Parts Checklist 8
U
Program m able Functions 12
Using Intercom or Conference with
External Calls 37
R
Receiving an ExternalTelephone Call
During an Intercom Call 37
Using the Soft Keys 12
W
Receiving an Intercom Call 37
Receiving and Storing Call Records 45
Replacing the Battery 51
Walkie Talkie 23
Wall Mounting the Base 12
Reviewing Call Records 45
Reviewing, Changing or Deleting Stored
Num bers 41
Ringer Tone 16
Ringer Volum e Switch 29
S
Service 58
Speakerphone 27, 28
Speakerphone Volum e Control 35
Storing a Nam e and Num ber
in Mem ory 39
Storing a Redial Num ber 41
60
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
What your warranty covers:
•
Defects in materials or workmanship.
For how long after your purchase:
•
One year, from date of purchase.
(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.)
What we will do:
Provide you with a new or, at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original product’s
warranty period.
•
How you get service:
•
•
Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton
and packing materials.
”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period, must
be presented to obtain warranty service.” For rental firms, proof of first rental is also required. Also print your name and address and a
description of the defect. Send via standard UPS or its equivalent to:
ATLINKS USA, Inc.
c/o Thomson
11721 B Alameda Ave.
Socorro, Texas 79927
•
•
•
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
Insure your shipment for loss or damage. ATLINKS accepts no liability in case of damage or loss.
A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and user controls. Any additional
information, should be obtained from your dealer.)
•
•
•
•
•
•
Installation and setup service adjustments.
Batteries.
Damage from misuse or neglect.
Products which have been modified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of nature, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be
necessary. The return of the card is not required for warranty coverage.
Limitation of Warranty:
•
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY
DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY ATLINKS USA, INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE A
GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
•
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. ATLINKS USA, INC.
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT
OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED
WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
•
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied
warranty lasts so the above limitations or exclusions may not apply to you.
•
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty information.
•
ATLINKS USA, Inc.
101 West 103rd Street
Indianapolis, IN 46290
© 2002 ATLINKS USA, Inc.
Tradem ark(s) ® Registered
Marca(s) Registrada(s)
Model 21011
16047080 (Rev. 4 Dom E)
02-47
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|