camcorder
user's guide
CC6151/CC6251/CC6271
Download from Www.Somanuals.com. All Manuals Search And Download.
Assistance
We want to make sure you enjoy your new camcorder. If you have any
questions, call:
Camcorder Exchange Warranty...........800-283-6503 (pages 84-85)
Customer Service...................................800-336-1900 (page 83)
Accessories............................................. 800-338-0376 (pages 70-75)
Table of Contents
Safety Information.............................. i
Power Your Camcorder
• Use the Adapter/Charger to
Power Your Camcorder ............ 12
• Use the Battery to Power
Your Camcorder...................13-15
• Use the Optional DCC08
First Time Operation
• Assistance ....................................... 3
• Unpack the Camcorder and
Accessories ................................. 3
• Attach the Adapter/Charger ............ 4
• Adjust the Handstrap to Fit
Car Cord Adapter ..................... 16
Date and Time Display
Your Hand .................................. 4
• Slide LENS COVER Control to
Open Lens Cover........................ 4
• Insert a Tape .................................... 5
• Set POWER (CAMERA/OFF
VCR) Switch to CAMERA .......... 5
• Adjust the Viewfinder
and Eyepiece Focus Control........ 6
• Select a Recording Speed................ 6
• Select a Tape Length ....................... 7
• Set the AE Dial to AUTO................. 8
• Start and Stop Recording ................ 8
• Play Back What you Have
• Install Clock Lithium Cell ........ 17
• Set the Date and Time..........18-19
• Record the Date, Time, and
Title Displays ................... 20-21
Videocassettes
• Erase Protection ............................ 22
• Recording and Playback
Speeds and Times ..................... 22
• Insert and Remove Cassettes......... 23
• Cassette Care and Storage............. 23
Recording
Recorded .................................... 9
• Set the POWER Switch to OFF
to Turn Off the Camcorder ........ 9
• Close the Lens Cover ...................... 9
• Review Camcorder’s
• Time-Remaining Display .........24-25
• Recording Tips .............................. 26
• Use the Viewfinder to See
What You Record...................... 27
• Viewfinder Displays .................28-31
• Full Auto Mode ............................. 32
Operating Controls .............. 10-11
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
• Quick Record Feature ................... 33
• Quick Review Feature ................... 33
• Tally Light ..................................... 33
• Camera Edit Feature ..................... 33
• Flying Erase Head ......................... 33
• Auto Head Cleaner ........................ 33
• Zooming
• Use the Zoom Buttons .........34-35
• Tele Macro Zooming ................ 35
• Focusing
• Auto Focus................................ 36
• Manual Focus ......................36-37
• White Balance ..........................38-39
• Exposure Control .....................40-41
• Fade In and Out ............................. 42
• AE Dial .......................................... 43
• Front Light and Back Light........... 44
• Travel Tips .................................... 45
• Titles
Playback
• Use the Viewfinder for
Playback ..............................60-61
• Tracking ........................................ 61
• Playback Features
• Position the Tape ...................... 62
• Visual Search ............................ 62
• Stop-Action Pause .................... 62
• Time Counter ............................ 63
• Memory-Stop Feature ........... 63
• Use the Cassette Adapter .........64-65
• Playback on TV (or VCR)
with Audio/Video Inputs .....66-67
• Playback on a TV Without
Audio/Video Inputs .............68-69
Optional Accessories...................70-75
• Accessory Order Form .............73-75
Trouble Checks ...........................76-79
Care and Maintenance
• Record a Preset Title or
Title You Create.................... 46
• Clean the Camcorder..................... 80
• Clean the Camcorder’s Lens ......... 80
• Clean the Camcorder’s
Viewfinder ................................. 80
• Proper Care and Storage ............... 81
• Things to Avoid ............................. 81
• Create Your Own Title .............. 47
• Self-Timer Recording...............48-49
• Animation Recording ...............50-51
• Time-Lapse Recording .............52-53
• Tally Light (Turn On or Off) ......... 54
• Demo Mode .................................. 55
• JLIP (Joint Level Interface
Specifications.................................... 82
Information to User ......................... 82
Customer Assistance ........................ 83
Limited Warranty .......................84-85
Index ............................................86-89
Protocol) Identification
Number..................................... 56
• Attach the Shoulder Strap ............. 57
• Model CC6271 Only: Built-In Color
Enhancement Light .............58-59
2
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
This section describes the steps necessary to set up your camcorder to record. Refer to
the other sections for detailed operation and feature options.
Assistance
The toll-free numbers are available to help you with any problem you may encounter.
Camcorder Exchange Warranty...............800-283-6503
Customer Service................................... 800-336-1900
Accessories............................................. 800-338-0376
1. Unpack the camcorder and accessories.
• Save the packing materials and box in case you ever need to ship
or store your camcorder.
• The items shown below are packed with your camcorder. If any
are missing or appear damaged, contact your dealer immediately.
S
U A
P /
U
I
C
K
R
E
Y L
Q
T
E / T I M E C
O U N T E R
A
D
S
P / S L P
WARNING:
NICKEL
MA
N
CADMIUM
BATTERY
P
L
I
T
T
T
N
O
AU
T
R
O
F
T
T
I
LE
FA
D
A
E
S
E
P
I
A
H
B
G
I
C
K
L
W
1 / 1 0 0 0
S
H
D
H
AZE
MUST BE
RECYCLED
OR DISPOSED
OF PROPERLY.
Shoulder Strap
Part No. ACS091
Rechargeable Battery
Part No FB1260
or BB700
Model CC6151 or CC6251 or
CC6271 Camcorder*
(*Your camcorder may appear slightly
different than the one shown.)
Caution: Do not use
this adapter/charger
for any purpose other
than charging the
FB1260, BB700, or
FB120 battery pack or
supplying power to
the camcorder.
+
-
Cassette Adapter Cassette Adapter Battery
Part No. VCA115A (Size "AA" 1.5 Volt)
AC Adapter/Charger Part No. 241017
and DC Cable Part No. 233087
CAUTIONS: Lithium cell must be disposed of properly. Never handle
punctured or leaking cell. May cause burns or personal injury.
Clock Cell
Keep out of the hands of children. Can cause death or injury if swallowed.
If swallowed, consult a physician immediately for emergency treatment.
3-Volt Micro Lithium
Cell – such as CR2025 –
available from most local
drug stores and camera
shops. Use of other cells
present a risk of fire or
explosion.
The lithium cell used in this device may explode resulting in a fire or
chemical burn if mistreated. Do not recharge, disassemble, heat above
212°F (100°C), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the +
and – sides of the cell.
(continued on next page)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
2. Attach the adapter/charger.
To AC 100-240,
50/60 Hz
Adapter/
Charger
DC Cable
VCR
POWER
OFF
CAMERA
DC OUT
Jack
DC In Jack
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
• Connect the other end of the DC
cable to the DC in jack on the
camcorder as shown above.
• Plug the adapter/charger’s plug
into an operating outlet.
• Connect one end of the DC cable
to the DC OUT jack on the
adapter/charger.
3. Adjust the handstrap to fit your hand.
LENS
• Lift the flap on the
handstrap and separate
the velcro strip.
Cover
Control
Handstrap
• Insert your hand, adjust
the strap to fit snugly,
refasten the strap, and
close the flap.
Handstrap Velcro
Strip (Under Flap)
4. Slide LENS COVER control to open lens cover.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
5. Insert a tape.
EJECT Button
Tape Wheel
Tape Window
PUSH Here to
Close Cassette
Compartment
• Slide the EJECT button up.
The cassette holder opens
automatically.
• Insert the cassette with the tape
wheel facing up and the tape
window facing out.
• Turn the tape wheel on the
cassette to remove any slack
from the tape.
• Press on the area labeled PUSH
until the cassette holder locks
into place.
6. Set POWER (CAMERA/OFF/VCR) switch to CAMERA.
POWER
VCR
POWER
OFF
CAMERA
Switch and
Indicator
• The power indicator lights and the
camcorder enters record-pause.
power off (OFF), or play back
tapes (VCR).
PAUSE
appears in the
• The camcorder automatically turns
off if it remains in record-pause
for five minutes. Set POWER
switch to OFF and then back to
CAMERA.
viewfinder when the camcorder is
in record-pause.
• The position of this switch tells
the camcorder whether you want
to record (CAMERA), turn the
(continued on next page)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
SP/SLP
Button
Eyepiece
Focus
Control
Electronic
Viewfinder
SP/SLP
TE/TIME
A
D
COUNTER R/M
UICK REC
Q
L
P
VCR
M
A
AU
N
T
O
O
N
T
L
R
F
I
G
SEPIA
H
T
EJECT
F
ADE
TITLE
B
A
C
K
L
H T
I
G
P
S
H
A
Z
E
1
/ 1 0 0 0
OFF
AU
T
O
ON
L
I
G
H
T
7. Adjust the viewfinder and eyepiece focus control.
You can see what you record in the
viewfinder.
• Turn the eyepiece focus control to
adjust the focus of the viewfinder
for your vision.
• Adjust the viewfinder for a
comfortable viewing position.
8. Select a recording speed.
Select SP or SLP recording speed.
Press and hold the SP/SLP button to
select a recording speed. The tape
speed you select (SP or SLP) appears
in the viewfinder.
recording time (20 minutes with a
TC-20 tape).
• SLP – Extended play provides
three times the recording time as
SP (60 minutes with a TC-20
tape). SLP has slightly more
picture noise in normal playback.
• SP – Standard play provides the
best picture, but the shortest
6
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
SP/SLP
TE/TIME
A
D
COUNTER R/M
UICK REC
Q
L
P
VCR
M
A
AU
N
T
O
O
N
T
L
R
F
I
G
SEPIA
H
T
EJECT
F
ADE
TITLE
B
A
C
K
L
H T
I
G
P
S
H
A
Z
E
1
/ 1 0 0 0
OFF
AU
T
O
ON
L
I
G
H
T
MENU Dial
9. Select a tape length.
Set the length of the tape you are
• Select T20 for a tape with 20
minutes or less recording time
in SP.
using so the camcorder can correctly
calculate the recording time
remaining on the tape.
• Select T30 for a tape with 30
minutes recording time in SP.
• Place the AE dial in MAN, and
press the MENU dial to display
the MENU in the viewfinder.
Rotate the dial to select TAPE
LENGTH.
• Select T40 for a tape with 40
minutes recording time in SP.
• Press the MENU dial twice to
remove the menus from the
viewfinder.
• Press the MENU dial in to display
the TAPE LENGTH menu. Rotate
the dial to select the length of tape
you are using (T20, T30, or T40).
• Details are on pages 24-25.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
VCR
POWER
OFF
CAMERA
Power
Indicator
U
I C K R E
U
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
Thumb
Trigger
POWER (VCR/
OFF/CAMERA)
MA
Switch
N
P
H
G
T
AU
R
T
O
TITLE
ADE
B
F
SEPIA
W
1 / 1 0 0 0
SHD
AU
T
O
T
FADE
TITLE
SEPIA
I
W
SHD
1 / 1 0 0 0
H
AZE
Tally
Light
AE Dial
10. Set the AE dial to AUTO.
• This places the camcorder in the
• Many of the special effects do not
AUTO mode.
operate in the AUTO mode.
• In the AUTO mode, the focus,
exposure, and white balance are
automatically controlled by the
camcorder.
• Details on page 32.
11. Start and stop recording.
• Press and release the thumb trigger
• Press and release the thumb trigger
again to stop recording. The
REC
to start recording.
appears in
camcorder is now in the record-
the viewfinder, and the tally light
lights while the camcorder is
recording.
pause mode.
appears in
PAUSE
the viewfinder.
(continued on next page)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
PLAY/PAUSE
Button
VCR
Button
VCR
STOP
Button
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
H
AU
T
O
TITLE
ADE
B
F
SEPIA
W
1 / 1 0 0 0
SHD
13. Set the POWER switch to
OFF to turn off the
camcorder.
12. Play back what you have
recorded.
• Set the POWER switch to VCR.
• Press VCR to rewind the tape.
The power indicator turns off.
• Press PLAY/PAUSE to play back
the tape.
14. Close the lens cover.
• Press STOP when you are finished
playing back the tape.
• Details on viewfinder playback are
on pages 60-61.
(continued on next page)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
15. Review camcorder’s operating controls.
PLAY/PAUSE
Button
VCR
Button
VCR
VCR
Button
QUICK REC
(Record) Button
STOP
Button
DATE/TIME Button
(Also COUNTER R/M Button)
SP/SLP Button
Model CC6271
Only: Color
Enhancement
Light
U
U I C K R E
L
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
G
T
AU
R
T
O
TITLE
ADE
B
F
SEPIA
M
A
N
L
W
1 / 1 0 0 0
Lens
SHD
AU
T
O
T
FADE
TITLE
I
SEPIA
Tally
Light
W
SHD
1 / 1 0 0 0
Microphone
AE Dial
10
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
15. Review camcorder’s operating controls. (continued)
Shoulder Strap
Attachment Ring
SP/SLP
TE/TIME
A
D
COUNTER R/M
UICK REC
Q
L
P
VCR
M
A
AU
N
T
O
O
N
T
L
R
F
I
G
SEPIA
H
T
EJECT
F
ADE
EJECT Button
TITLE
B
A
C
K
L
H T
I
G
P
H
H
A
Z
E
1
/ 1 0 0 0
OFF
AU
T
O
ON
PUSH Here to
Close Cassette
Compartment
L
I
G
H
T
MENU
Dial
BATT. (Battery)
RELEASE Button
Shoulder Strap
Attachment Ring
Model CC6271 Only: LIGHT
OFF•AUTO•ON Switch
Viewfinder
Eyepiece Focus Control
Models CC6251 and
CC6271 Only
Power Zoom Buttons
B (Bright) and C
(Color) Controls
(See Trouble Checks for
Details)
LENS
COVER
Control
Clock Cell Battery
Compartment
Handstrap
Attach Rechargeable
Battery Here
VCR
POWER
OFF
CAMERA
Attach Adapter/
Charger’s DC
Cord Here
Power Indicator
POWER (VCR/OFF/
CAMERA) Switch
JLIP Connector
Thumb Trigger
(Located Under
Small Cover)
AUDIO (MONO), RF DC, and
VIDEO OUT Jacks
(Located Under Small Cover)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Your Camcorder
Use the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
To AC 100-240,
50/60 Hz
Adapter/
Charger
DC Cable
VCR
POWER
OFF
CAMERA
DC OUT
Jack
DC In Jack
Attach Adapter/Charger
Remove Adapter/Charger
1. Connect one end of the DC cable to
the DC OUT jack on the adapter/
charger.
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
2. Connect the other end of the DC cable
to the DC in jack on the camcorder as
shown above.
Using an Optional Plug Adapter
3. Plug the adapter/charger’s plug into
the nearest AC outlet (100-240V,
50/60Hz).
An optional plug adapter might be
required in some countries.
CAUTION: Do not use this adapter/
charger for any other purpose other
than charging the FB1260, BB700, or
FB120 battery pack or supplying
power to the camcorder.
AC 100-240V
Optional AC
Adapter
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into the AC
outlet.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Your Camcorder
Use the Battery to Power Your Camcorder
The battery must be charged as described on the next page before it can be used the
first time. Initial charging takes approximately 70 minutes for the FB1260 (100
minutes for the BB700). When fully charged, the FB1260 supplies approximately
50-55 minutes (BB700 approximately 75-85 minutes) of operating time – depending
on how much you use the light, zoom, and pause. Conserve battery power by turning
the camcorder off during recording breaks.
Note: Use the small marker switch on the top of the battery to help remind yourself to charge
the battery. It has no other purpose.
Marker
Switch
Battery Safety Precautions
Do not short the battery’s
SP/SLP
TE/TIME
DA
COUNTER R/M
QUICK REC
terminals.
Do not attempt to disassemble or
modify the battery. There are no
M
A
user-serviceable parts inside.
Use the battery only with
specified adapter/chargers and
camcorders.
Throwing the battery into a fire
or exposing it to excessive heat –
over 149˚F (65˚C) could be
hazardous.
AUT
N
O
O
N
T
L
R
F
I
G
SEPIA
H
EJECT
F
A
D
E
T
I
T
L
E
B
A
C
K
L
T
I
G
H
P
H
A
Z
E
1
/ 1 0 0 0
OFF
O
AUT
ON
L
I
G
H
T
BATT. RELEASE
Button
Attach the Charged Battery
2. Press the battery down until it locks
into place.
If the DC cable is attached to the
camcorder, remove it before attaching
the battery. Also, install the lithium
clock cell before attaching the battery.
Details are on page 17.
3. Set the POWER switch to CAMERA.
The power indicator lights.
Remove the Battery
1. Hook the top end of the battery to the
back of the camcorder as shown
above.
Slide and hold the BATT. RELEASE
button to the right while removing the
battery.
ATTENTION: The RBRC seal on the battery used in your Thomson
Consumer Electronics product indicates that we are participating in a
program to collect and recycle Nickel Cadmium batteries throughout the
United States. Please call 1-800-8-BATTERY for information or
contact your local recycling center.
Ni-Cd
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Your Camcorder
Use the Battery to Power Your Camcorder (continued)
Hold Battery Flush
and Slide
Reference
Marks
To AC Wall
Outlet 100-
240 Volts,
50/60 Hz.
CHG
(Charge)
Indictor
Adapter/Charger
REFRESH
Indicator
REFRESH
Button
Caution: When a battery is attached to the adapter/charger, do not turn them
upside down. The battery may fall off and be damaged or cause injury.
Charge the Battery
Use the REFRESH Button
If the DC cable is attached to the DC OUT
jack on the adapter/charger, remove it.
The battery provides increased
operation time if you “refresh” it after
five chargings. The refresh feature
“refreshes” the battery by completely
discharging it.
1. Align reference mark on battery with
mark on adapter/charger.
2. Hold the battery flush against the
adapter/charger and slide it in the
direction of the arrow.
1. Attach battery to adapter/charger.
2. Press REFRESH. The REFRESH
indicator lights and the battery
begins discharging.
3. Plug adapter/charger into nearest AC
outlet (100-240V, 50/60Hz).
3. When discharging is completed, the
REFRESH indicator turns off, and
the CHG indicator flashes. The
battery now charges.
4. If the battery is properly connected,
the CHG indicator flashes.
Note: If you try to charge a battery that
has not been charged for a long period of
time, it may take a few minutes for the
CHG indicator to flash.
4. After the battery is charged, the
CHG (charge) indicator stops
flashing and lights.
5. After the battery is charged, the CHG
indicator stops flashing and lights.
5. Remove the battery from the
adapter/charger.
6. Remove the charged battery by sliding
it off the adapter/charger.
7. Attach the charged battery to the
camcorder.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Your Camcorder
Use the Battery to Power Your Camcorder (continued)
Battery Level Indicator
The battery level indicator appears in the
viewfinder and shows you the amount of
power in the rechargeable battery.
• When the battery power is almost
gone, flashes in the viewfinder.
The camcorder turns off automatically
after a few seconds. Set the POWER
switch to OFF to turn off the cam-
corder before replacing the battery.
The battery level indicator is not recorded
on the tape.
• When
appears, the battery is
fully charged.
• As the power is used
appear.
and
Battery Care and Storage
• Recharging takes approximately 70
minutes for the FB1260 and 100
minutes for the BB700 depending on
the battery’s condition.
• If the battery discharging must be
stopped in the middle, remove the
battery from the adapter/charger before
unplugging it from the AC outlet.
• Refreshing takes approximately 3-1/2
hours for the FB1260 and 5-1/2 hours
for the BB700 depending on the
battery’s condition.
• If the battery pack become too hot,
remove it from the charger and let it
cool down.
• Let a hot battery cool down before
attaching it to the AC adapter/charger.
• After repeated charging and use,
operation time gradually decreases.
When operation time is too short to be
useful, it is time to replace the battery.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Your Camcorder
Optional Car Cord Adapter
The optional DCC08 car cord shown on
page 70 allows you to power your
camcorder from the cigarette lighter
socket of a car, truck, or RV. It converts
12-volts to a 6-volt output.
Note: Consult the installation and operating
instructions enclosed with the DCC08 for
complete operating instructions.
Cautions: The DCC08 is designed to
be used only with vehicles having
negative ground electrical systems.
Use only car cord adapter DCC08 with
this camcorder. Use of any other car
cord adapter might damage the
camcorder and void your warranty.
Use the DCC08 Car Cord Adapter
Cigarette
Lighter Socket
Power
Connector
POWER
Indicator
VCR
POWER
OFF
CAMERA
Optional DCC08 Car
Cord Adapter
1. Set the POWER switch to OFF to turn
off the camcorder. The power
5. Insert the car cord’s cigarette lighter
plug into the vehicle’s cigarette lighter
socket. The power indicator on the car
cord adapter lights.
indicator on the camcorder turns off.
2. If the battery or DC cable is attached
to the camcorder, remove it.
6. Set the POWER switch to CAMERA to
turn on the camcorder. The power
indicator on the camcorder lights.
3. Hold the top of the power connector
flush against the camcorder, and press
the bottom of the power connector
down until it locks into place.
Caution: Make sure the camcorder’s
power is turned off before removing
the car cord’s plug from the cigarette
lighter socket.
4. Take the vehicle’s cigarette lighter out
of the socket.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display
Install the Clock Lithium Cell
The clock cell indicator
flashes for a few seconds in the viewfinder when
you turn on the camcorder if the cell is not installed or needs replacing.
Insert Object Here
to Remove Cell
Clock Cell
(+ Side Facing Out)
VCR
POWER
OFF
CAMERA
Clock Cell
Compartment
1. Make sure camcorder is turned off,
and remove any power supply
attached to the camcorder.
4. Close the compartment cover.
It clicks into place.
To Remove Lithium Cell
2. Press release tab of clock cell
compartment cover and open the
compartment.
To remove battery, insert a pointed
nonmetallic object between battery and
compartment and lift.
3. Insert the clock cell with the “+”
terminal facing out, and press it in.
Cautions: Lithium cell battery. Replace only with 3-volt lithium cell – such
as CR2025. Use of other cell presents a risk of fire or explosion. Must be
disposed of properly. Never handle punctured or leaking cell. May cause
burns or personal injury.
Keep out of the hands of children. Can cause death or injury if swallowed. If
swallowed, consult a physician immediately for emergency treatment.
The lithium cell used in this device may explode resulting in a fire or chemical
burn if mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or
incinerate.
Never use metallic tweezers to hold the cell, and never short the + and – sides
of the cell.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display
Set the Date and Time
You must set the correct date and time before you can display and record it
on your tapes. The clock cell must be installed as shown on the previous
page before you can set the date.
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
MENU Dial
(Rotate or Press In)
MENU
1. Set the POWER switch to CAMERA,
and make sure the AE dial is not set to
AUTO.
MENU END
AUTO
AUTO
JAN 1.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
2. Press the MENU dial in to display the
main MENU in the viewfinder.
T30
AUTO
FAST
ZOOM SPEED
NEXT
MENU
MENU END
AUTO
AUTO
JAN 1.98
OFF
FOCUS
4. Press the MENU dial to display the
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
DATE/TIME menu.
T30
AUTO
FAST
DATE/TIME
YEAR
MONTH
DAY
1998
JAN
1
TIME
PM 12:00
3. Rotate the MENU dial to highlight
DATE/TIME.
EXIT
5. Rotate the MENU dial to highlight
YEAR. Press the MENU dial in.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display
Set the Date and Time (continued)
When YEAR starts flashing, rotate the
MENU dial to select the year. When
the correct year appears, press the
MENU dial in to set the year.
DATE/TIME
YEAR
MONTH
DAY
1998
NOV
18
TIME
AM 8:00
6. Repeat step 5 to set the MONTH and
DAY.
7. Rotate the MENU dial to highlight
EXIT
TIME.
11. Press the MENU dial in. The main
MENU appears with MENU END
highlighted.
DATE/TIME
YEAR
MONTH
DAY
1998
NOV
18
TIME
PM 12:00
MENU
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
EXIT
T30
8. Press the MENU dial in. When the
hour starts flashing, rotate the MENU
dial to set the hour including AM
or PM.
AUTO
FAST
12. Press the MENU dial in again to
remove the main MENU from the
viewfinder.
9. Press the MENU dial in. When the
hour stops flashing and the minutes
start flashing, rotate the MENU dial to
set the minutes.
10. Press the MENU dial in. When none
of the settings are flashing, rotate the
MENU dial to highlight EXIT.
Notes:
If you decide to return the date and time to the
previous settings while the DATE/TIME menu
is displayed, rotate the MENU dial to highlight
EXIT, and press. Press the MENU dial again
to remove the main MENU from the
viewfinder.
To display and record the date and/or time, see
the following pages.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display
Record the Date, Time, and Title Displays
You must install the clock cell and set the date and time (as shown on the previous
pages) before the you can select and record the correct date and time. You must
create your title (as described on pages 46-47) before you can select and record it.
DATE/TIME
Button
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
AE Dial
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
Select Date, Time, Date and Time, AUTO DATE, or Title You
Created to Record On Your Tape
1. Attach a power supply and set
POWER switch to CAMERA. The
power indicator lights.
• Date and Time Display: The
date and time are displayed
and recorded.
• AUTO DATE: The date is auto-
matically recorded for approxi-
mately five seconds and then AUTO
DATE is displayed whenever:
2. Make sure the AE dial is not set to
AUTO to select any mode except
AUTO DATE.
Note: AUTO DATE is selected when the
AE dial is set to AUTO.
• The date has been set or
changed.
3. Repeatedly press the DATE/TIME
button until the display you want to
record appears in the viewfinder.
• This display mode has just been
selected.
4. Select date, time, date and time,
• The tape has been changed or the
tape compartment opened.
AUTO DATE, or the title you created.
• Date Display: The date is dis-
• Title: The title you have created is
displayed and recorded. No display
appears if a title has not been created.
played and recorded.
• Time: The time is displayed and
recorded.
• No Display: No display is dis-
played or recorded.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display
Record the Date, Time, and Title Displays (continued)
Viewfinder Displays
Repeatedly Press DATE/TIME
NOV 18.98
AM 10:25:00
Time Display
Date Display
NOV 18.98 AM 10:25:00
No Display
Date and Time Display
TAYLOR IS FOUR
AUTO DATE
Title You Created
AUTO DATE Display
To Record the Date, Time, Date and Time, AUTO DATE,
or Title You Created
1. Make sure the camcorder is in
record-pause.
4. Begin recording.
5. To remove the display, press DATE/
TIME until no display appears in the
viewfinder.
2. Make sure the AE dial is not set to
AUTO unless you want to record
AUTO DATE.
Note: If you do not want to record a date or
time, press DATE/TIME to select the date and
time off mode before you begin recording.
No display appears in the viewfinder.
3. Repeatedly press DATE/TIME to
display the date, time, date and time,
AUTO DATE, or title you created.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Videocassettes
Make sure you select good quality tapes for your camcorder. Use of poor quality tapes
or tapes that have been damaged or mishandled can contaminate the video heads,
resulting in a snowy picture or no picture at all during playback. Because there is no
control over the type of tape purchased or rented by consumers, head cleaning is not
covered under warranty. It is considered normal maintenance.
The automatic head-cleaning system minimizes the need for accessory cleaners or
cleaning by a Service Center. This system is activated whenever you insert or remove
a cassette.
Erase Protection – Safety Tab
You can use your videocassettes over and over again. To erase a previous recording,
just record over it.
Safety
Tab
A. Remove
safety tab or
B. Cover hole
with vinyl tape or
slide tab to REC ON to
record over tape.
slide tab to
REC OFF.
Recording and Playback Speeds and Times
The camcorder records and plays back in standard speed (SP) or extended play
(SLP). Select the recording speed by pressing and holding the SP/SLP button.
The selected speed is displayed in the viewfinder. Listed below are the
maximum SP and SLP recording times for popular VHS-C cassettes.
• SP – Standard play provides the
best picture (less picture noise),
but the shortest recording time (20
minutes with a TC-20 tape).
Recording Time
Cassette
TC-20
TC-30
TC-40
SP
SLP
• SLP – Extended play provides
three times the recording time as
SP (60 minutes with a TC-20 tape).
SLP has slightly more picture
noise than SP in normal playback.
This might not be noticeable.
20 Min. 60 Min.
30 Min. 90 Min.
40 Min. 120 Min.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Videocassettes
Insert and Remove Cassettes
Caution: Insert
the cassette
only one way
with the tape
wheel facing up
and the tape
SP/SLP Button
EJECT Button
Tape Wheel
window facing
out. The
cassette should
slide easily into
the holder. Do
not force the
cassette.
Push Here to
Close Cassette
Compartment
Tape Window
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
1. Press EJECT. The cassette holder
opens automatically.
2. Insert the cassette with the tape wheel
facing up and tape window facing out.
3. Press on the area labeled PUSH until
Tape Wheel
the cassette holder locks into place.
Cassette Care and Storage
• When you are finished with a cassette,
rewind it, remove it from the
camcorder, and label it.
• Keep dust from entering the cassette
compartment. All dust is abrasive and
causes excessive wear on the tape and
the camcorder’s recording or playback
heads.
• Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold might damage
your cassettes.
• Do not use cassettes with damaged or
spliced tape.
• Do not use a cassette if it has been
damaged or exposed to moisture. The
tape might jam and/or damage your
camcorder.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Time-Remaining Display
The approximate time remaining on the tape in the camcorder for the tape
speed you select is displayed. You must set the correct tape length in the
TAPE LENGTH feature of the main MENU before the camcorder can
correctly calculate time remaining.
SP/SLP
Button
SP/SLP
TE/TIME
A
D
COUNTER R/M
UICK REC
Q
L
P
VCR
M
A
AU
N
T
O
O
N
T
L
R
F
I
G
SEPIA
H
T
EJECT
F
ADE
TITLE
B
A
C
K
L
H T
I
G
P
H
H
A
Z
E
1
/ 1 0 0 0
OFF
AU
T
O
ON
L
I
G
H
T
MENU Dial
(Rotate or Press In)
Select a Tape Length
4. Rotate the MENU dial to highlight
1. Set the POWER switch to CAMERA,
and make sure the AE dial is not set to
AUTO.
TAPE LENGTH.
MENU
2. Press the SP/SLP button to select a
MENU END
tape speed.
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
3. Press the MENU dial in to display the
main MENU in the viewfinder.
T30
AUTO
FAST
MENU
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
T30
AUTO
FAST
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Time-Remaining Display (continued)
30MIN
30MIN
SP
T30
Tape Length
Indicator
29MIN
3MIN
Tape Speed
Indicator
TAPE END
2MIN
(Flashing)
Time-Remaining Display
in Viewfinder
1MIN
(Flashing)
0MIN
(Flashing)
5. Press the MENU dial to display the
• Select T30 for a tape with 30
TAPE LENGTH menu.
minutes recording time in SP.
• Select T40 for a tape with 40
minutes recording time in SP.
TAPE LENGTH
T20
T30
T40
7. Press the MENU dial twice to select
the speed and remove the MENU.
The time-remaining display starts
flashing when the remaining tape
time reaches two minutes.
EXIT
TAPE END appears when the tape reaches
its end during recording or a cassette is
loaded thats tape is already at its end.
6. Rotate the MENU dial to highlight the
type of tape you are using.
• Select T20 for a tape with 20
minutes or less recording time
in SP.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Tips
• Fading in and out of scenes makes
your videos appear more professional.
• Try to make sure indoor scenes are
well-lit. This improves picture quality
and color reproduction.
• Learn to use the special production
effects available with your camcorder
to add variety to your recordings.
• Do not move the camcorder rapidly
from side-to-side while recording.
A steady, gradual “pan” avoids
blurring and “jitter”.
• Be aware of video and audio back-
grounds. Background details barely
noticed while you are taping may
show up as visual “clutter” on your
recording. Background noises
(especially TV sets, radios, household
appliances, traffic sounds, etc.) might
detract from the sound you want
to record.
• Use the viewfinder to make sure the
camcorder is level while recording so
that your scene isn’t “tilted”.
• Do not bump or tap the camcorder’s
microphone while recording because
this sound is recorded.
• Avoid long “still” shots of landmarks
and scenic attractions. Recordings are
more interesting if they include people
and details. “Local color” gives travel
videos lasting appeal. Consider
• Include close-ups of individuals
when taping family outings or
group functions.
recording a familiar or landmark scene
from an unfamiliar vantage point.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Use the Viewfinder to See What You Record
The camcorder’s viewfinder is a miniature monitor that displays the
picture seen by the camcorder when recording.
Eyepiece Focus Control
Cautions
Viewfinder
Do not force the viewfinder
to rotate completely
around. This will damage
the viewfinder and/or the
camcorder.
When carrying the
camcorder with the
shoulder strap, put the
viewfinder down and in to
help prevent possible
damage to the viewfinder
from bumping against your
body as you move.
VCR
POWER
OFF
CAMERA
Adjust Viewfinder for Convenient Viewing
For convenient viewing, slide the viewfinder out from the camcorder and
rotate it up and down.
Eyepiece Focus Control
The eyepiece focus control lets you set
the focus of the viewfinder for your
vision. If you wear eyeglasses, you
probably can operate the camcorder
without them.
screen displays. Look through the
viewfinder and adjust the eyepiece focus
control for your vision.
The eyepiece focus control does not affect
the focus of the picture actually recorded
by the camcorder.
It is easiest to set the correct focus by
focusing on one of the viewfinder’s on-
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Viewfinder Displays
REC
AT
SEPIA
MWB
PAUSE
HAPPY BIRTHDAY
NOV 18.98 PM 8:30:03
AE Dial Special Effect Indicators
•
BACK LIT
This indicator appears when you
•
AUTO (Full Auto Mode)
select
to make a subject appear
AUTO LOCK appears briefly when
you select AUTO.
brighter that appears too dark because
of background lighting.
•
MAN (Manual Mode)
•
1 S 1/1000
AUTO RELEASE appears briefly
This indicator appears when you
select 1/1000 to record fast-moving
action.
when you select MAN.
•
SPORTS
This indicator appears when you
•
•
HZ: HAZE
select
to record fast-moving
This indicator appears when you
select HAZE to soften the image and
create a misty white look.
action, such as sporting events.
•
SEPIA
This indicator appears when you
SD:SHADOW
select
to give your recordings a
brown-tone like old photographs.
This indicator appears when you
select SHDW to darken the picture
and reduce glare.
•
FRONT LIT
This indicator appears when you
select
to darken a subject that
appears too bright because of front
lighting.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Viewfinder Displays (continued)
Battery Level Indicator (
)
•
•
appears when you select
•
This indicator shows the amount of
:CLOUD to record outdoors on a
power left in the rechargeable battery.
cloudy day.
•
This indicator flashes when the battery
is almost empty.
appears when you select
:HALOGEN to record using
Cassette Warning
• The indicator flashes when the
POWER switch is set to CAMERA and
there is no cassette in the camcorder.
halogen or tungsten lighting.
• MWB appears when you select MWB
to adjust the color temperatures.
• Details are on pages 38-39.
• The
indicator flashes when the
POWER switch is set to CAMERA and
the safety tab is set to REC OFF or
removed from the cassette.
Status Displays
•
•
•
The REC indicator appears when the
camcorder is recording.
PAUSE
Date, Time, Date and Time, AUTO
DATE, or Title you Created
The
indicator appears
during record-pause.
Press the DATE/TIME button to display
the date, time, date and time, AUTO
DATE, or the title you created.
appears when the camcorder plays
back a tape.
•
•
•
appears during play-pause.
appears during fast forward.
appears during rewind.
• These displays are recorded when they
are displayed. If you do not want to
record one of them, press DATE/TIME
until no display appears.
(AT) Tracking Indicator
• Details are on pages 20-21.
AT appears when the camcorder is
adjusting tracking automatically.
Preset Titles
Press the TITLE button to display and
record one of the eight preset titles or the
title you created. Details are on page 46.
Zoom Indicator ( )
The zoom indicator appears here when
you use the zoom lever.
MWB (Manual White Balance
Indicators)
The indicator for the manual white
balance selected in the MENU appears
here.
•
appears when you select
:FINE
to record outdoors on a sunny day.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Viewfinder Displays (continued)
T
30
5MIN
SP
EFFECT
M 0:00:00
FADER
BK
+03
BK
LENS COVER
TAPE END
15S
1S
Fade Indicators ( EFFECT and
FADER)
The EFFECT and
briefly appear when you press the FADE
button to turn on fading. remains
when fading is turned on. Press FADE
Dew Warning (
)
BK
The dew indicator appears when exces-
sive moisture (condensation) has entered
the camcorder. The camcorder will not
operate when this indicator appears.
Place the camcorder in a warm, dry area
until this indicator disappears.
BK
FADER indicators
BK
again to remove
BK
and turn off fading.
Exposure Indicators (+03)
Focus Indicators (
)
This indicator appears when you are
adjusting brightness manually using the
EXPOSURE menu. Make sure the AE
dial is not set to AUTO.
These indicators appear when you are
adjusting focus manually using the
FOCUS menu. Make sure the AE dial is
not set to AUTO.
• Details are on pages 40-41.
• The focus indicators (
) flash
when the auto-focus system cannot
operate properly.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Viewfinder Displays (continued)
•
appear when you have
Time Counter (M0:00:00)
selected MAN in the FOCUS menu.
• The time counter appears during
•
and
flash while you adjust
and flash
playback. It is not recorded.
manual focus and
when you cannot adjust the focus
any farther.
• An “M” appears in front of the time
counter when memory-stop is on.
• Details are on page 63.
• Details are on pages 36-37.
Lithium Cell (
Time-Remaining Display (5MIN)
)
The approximate time remaining on the
tape is automatically displayed. The
correct tape length must be set in the
TAPE LENGTH feature of the
main MENU.
• This indicator appears for a few
seconds when you turn on the cam-
corder and the clock cell is missing or
needs to be replaced.
• Details are on page 17.
• Details are on pages 24-25.
Self-Timer, Animation, and Time-
Warnings and Information
Lapse Indicators (
1S and
15S)
• LENS COVER briefly flashes to remind
• The interval time selected for self-
timer or time-lapse recording (
you to open the lens cover.
15S,
LENS COVER might flash when the
camcorder is used in dark areas -- even
if the lens cover is open.
30S, 1MIN, or 5MIN) appears here.
Details are on pages 48-49 and 52-53.
• The recording time selected for
animation or time-lapse recording
• TAPE END appears when the end of
the tape is reached during recording or
a cassette is inserted with its tape
already at the end.
(
1/4S, 1/2S, 1S, or 5S)
appears here.
• Details are on pages 50-51 and 52-53.
Tape Length (T30)
The tape length (T20, T30, or T40)
selected in the main MENU appears here.
• Details are on pages 24-25.
Tape Speed Indicators (SP or SLP)
The tape speed selected with the SP/SLP
button appears here.
•
Details are on pages 24-25.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
PLAY/PAUSE
Button
VCR
Button
VCR
VCR
Button
STOP Button
QUICK REC Button
I C K R E
U
Q
L
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
G
T
AU
R
T
O
TITLE
ADE
B
F
SEPIA
M
A
N
L
W
1 / 1 0 0 0
SHD
AU
T
O
T
FADE
TITLE
SEPIA
Tally Light
I
K
W
SHD
1 / 1 0 0 0
H
AZE
Microphone
AE Dial
Full Auto Mode
• The camcorder automatically
controls focus, exposure, and white
balance.
The AE dial lets you select automatic or
manual control of several features.
To Turn on the Full Auto Mode
• The MENU dial will not operate.
1. Set the POWER switch to CAMERA.
The power indicator lights and the
camcorder enters record-pause.
• AUTO DATE is selected for the
date and time display.
To Turn Off the Full Auto Mode
PAUSE
appears in the viewfinder.
1. Set the AE dial to MAN.
2. Set the AE dial to AUTO.
3. Press the thumb trigger to start
recording.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Camera Edit Feature
Quick Record Feature
The camera edit feature allows you to
position the tape when the camcorder is in
record-pause. Set POWER switch to
CAMERA.
The quick record feature allows you to
record for five seconds providing short
scene transitions.
1. Set POWER switch to CAMERA.
• Press and hold VCR
to visually search the recorded tape
in reverse.
2. Press QUICK REC to display
5S in
the viewfinder.
3. Press the thumb trigger to start
recording. The camcorder records for
five seconds and enters record-pause.
• Press and hold VCR
to visually search forward on the
recorded tape.
To Turn Off the Quick Record Mode
Release the button to return the cam-
corder to record-pause at that point on
the tape. Press the thumb trigger to start
recording at this point.
1. Press the QUICK REC button to
remove
5S from the viewfinder.
Quick Review Feature
Flying Erase Head
Press and release VCR
when the
A separate erase head is mounted on
the spinning headwheel (hence the term
“flying”). This allows you to make clean
edits without the “glitches” or “rainbow
noise” that might occur at the beginning
or the end of recordings.
camcorder is in record-pause to review
the last few seconds of a recording. The
POWER switch must be set to CAMERA.
The camcorder plays back the last few
seconds of the recording, returns the tape
to its previous position, and returns to
record-pause.
Auto Head Cleaner
The camcorder has an automatic head-
cleaning system. Whenever you insert or
remove a cassette, this system
is activated.
Tally Light
The tally light lights when the camcorder
is recording. The tally light flashes during
self-timer and time-lapse recording.
The head-cleaning system minimizes the
need for accessory cleaners or cleaning
by a Service Center.
The tally light must be set to ON in the
TALLY LAMP menu. See page 54 for
details.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Zooming
You can zoom in and out for close ups or wide-angle shots just by pressing the
zoom buttons on the camcorder. The camcorder automatically focuses when
you zoom at most distances.
To record a close-up of a small subject closer than three feet. Turn on the TELE
MACRO feature in the main MENU. You can record a small subject at a
distance of approximately 23 inches.
Zoom Buttons
(T and W)
U
I C K R E
U
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
ADE
F
SEPIA
MENU Dial
(Rotate or Press In)
W
1 / 1 0 0 0
SHD
Use the Zoom Buttons (W and T)
Use the ZOOM SPEED Menu
1. To zoom in or out, press one of the
zoom buttons on the camcorder.
Select ZOOM FAST or ZOOM SLOW
using the menus.
• To move the lens in the telephoto
1. Make sure the POWER switch is set
to CAMERA and the AE dial is not
set to AUTO.
(close-up) direction, press T.
• To move the lens in the wide angle
direction, press W.
2. Press the MENU dial in to display
the main MENU.
• The zoom level indicator appears in
the viewfinder during zooming.
MENU
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
T30
AUTO
FAST
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Zooming (continued)
3. Rotate the MENU dial to highlight
ZOOM SPEED.
5. Rotate the MENU dial to highlight
FAST or SLOW, and press the dial in.
4. Press the MENU dial in to display the
• Select FAST to zoom faster.
ZOOM SPEED menu.
• Select SLOW to zoom slower.
6. Rotate the MENU dial to EXIT and
press the MENU dial in twice to
remove the MENUS.
ZOOM SPEED
FAST
SLOW
Notes: For fastest zooming, select FAST in
the ZOOM SPEED menu and press the zoom
button firmly.
EXIT
For slowest zooming, select SLOW in the
ZOOM SPEED menu and press the zoom
button lightly.
To Turn Tele Macro Zooming ON or OFF
1. Make sure the POWER switch is set to
CAMERA and the AE dial is not set to
AUTO.
TELE MACRO
OFF
ON
2. Press the MENU dial in to display the
main MENU in the viewfinder.
MENU
EXIT
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
5. Rotate the MENU dial to highlight
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
ON or OFF and press the dial in.
T30
• Select ON if you want to record a
small subject within approxi-
mately 23 inches.
AUTO
FAST
• Select OFF for normal zooming.
3. Rotate the MENU dial to highlight
6. Press the MENU dial twice to
TELE MACRO.
remove the MENU.
4. Press the MENU dial in to display the
TELE MACRO menu.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Focusing
The camcorder adjusts focus automatically under normal conditions.
You might need to focus manually under certain conditions.
Zoom Buttons
(T and W)
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
MENU Dial
(Rotate or Press In)
Auto Focus
Manual Focus
During auto focus the camcorder
focuses on the object located in the
center area of the viewfinder.
You might need to focus manually under
certain conditions.
1. Set the POWER switch to CAMERA, and
• Set the AE dial to AUTO to turn on
the auto focus feature. No focus
indicator appears in the viewfinder.
make sure the AE dial is not set to AUTO.
2. Press zoom button T to zoom in on the
subject and center the subject in the
viewfinder.
Notes: The low-contrast indicator
(
) in the viewfinder indicates
3. Press the MENU dial in to display the
the auto-focus system might not
operate correctly due to low illumina-
tion, low or no contrast, repeated
patterns, or two subjects at different
distances overlapping.
main MENU in the viewfinder.
MENU
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
Use tele macro zooming when
recording a subject close to the
lens or the camcorder may
zoom out to focus.
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
T30
AUTO
FAST
The lens must be clean for the cam-
corder to focus accurately.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Focusing (continued)
4. Press the MENU dial in to display the
flashes while you are adjusting
the focus and flashes when
FOCUS menu.
you cannot adjust the focus any
more.
FOCUS
AUTO
MANU
• Rotate the MENU dial up to focus
on a subject nearer.
flashes
while you are adjusting the focus
and flashes when you cannot
adjust the focus any more.
EXIT
7. Press the MENU dial twice to
remove the menus.
5. Rotate the MENU dial to highlight
Notes: To return to auto focus, select
AUTO in the FOCUS menu or set the AE
dial to AUTO.
MANU (manual) and press the dial
in.
appears in the
viewfinder. The focus is locked at
this point.
6. Adjust the focus for a subject nearer
or farther away.
• Rotate the MENU dial up to focus
on a subject farther away.
Conditions Requiring Manual Focus
• When recording two subjects at
different distances that overlap in the
same scene.
• When recording a subject through a
window.
• When recording a subject having a
close foreground and a background that
is far away.
• When the subject is not in the center of
the scene.
• When recording a scene with fast
motions, like a tennis swing.
• When recording in low-light situations.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
White Balance
Making colors look natural is what white balance is all about. This is achieved by
adjusting the way the camcorder “sees” and records the light source in the scene
you record. Your camcorder is equipped with automatic white balance.
You might want to adjust white balance manually under certain conditions, such as
recording an object with various shades of the same color or when recording a
predominantly red or brown object outdoors.
Zoom Buttons
(T and W)
U
U I C K R E
Y
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
N
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
MENU Dial
(Rotate or Press In)
Auto White Balance
Manual White Balance
During auto white balance, the camcorder 1. Set the POWER switch to CAMERA,
adjusts the white balance.
and make sure the AE dial is not set to
AUTO.
• Set the AE dial to AUTO to turn on the
automatic white balance feature. No
indicator appears in the viewfinder.
2. Press the MENU dial in to display the
main MENU in the viewfinder.
MENU
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
T30
AUTO
FAST
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
White Balance (continued)
A.Point camcorder at a white, flat
object such as a piece of white
paper.
3. Rotate the MENU dial to highlight
M.W.B. and press the dial in to display
the M.W.B. menu.
B. While MWB is highlighted, press
and hold the MENU dial until
MWB starts flashing.
M.W.B.
AUTO
:FINE
:CLOUD
:HALOGEN
MWB
The MWB indicator flashes
while the camcorder is adjusting
white balance and stops flashing
when it is ready to record.
EXIT
Note: To change the tint for special
recording, substitute colored paper for
white. The white balance is
4. Rotate the MENU dial to highlight the
white balance you want to use.
adjusted based on the color.
• No indicator appears when you
Red paper – deeper green
Blue paper – orange
select AUTO white balance.
• Select
:FINE when recording
Yellow paper – deeper purple
outdoors on a sunny day.
5. Press the MENU dial twice to select a
• Select
:CLOUD when record-
white balance and remove the menus.
ing outdoors on a cloudy day.
Notes: To return to auto white balance,
select AUTO in the M.W.B. menu or set the
AE dial to AUTO.
• Select
:HALOGEN when
recording using halogen or tungsten
lighting.
• Select MWB when shooting
subjects with different color
temperatures and adjust the white
balance as follows:
M.W.B.
AUTO
:FINE
:CLOUD
:HALOGEN
MWB
EXIT
Note: Connecting your camcorder to a
color TV monitor may be helpful when
making white balance adjustments.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Exposure Control
The camcorder controls the iris for you when the AE dial is set to AUTO.
The camcorder adjusts brightness automatically under normal condi-
tions. You might need to adjust brightness manually when the back-
ground is too bright or too dark in comparison with the subject.
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
MENU Dial
(Rotate or Press In)
Auto Exposure
Manual Exposure
The camcorder adjusts the iris for
the best possible picture during
auto exposure.
You may need to adjust exposure
manually under certain conditions, such
as those listed on the next page.
• Set the AE dial to AUTO to turn on the
auto exposure feature. No exposure
indicator appears in the viewfinder.
1. Set the POWER switch to CAMERA,
and make sure the AE dial is not set
to AUTO.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Exposure Control (continued)
2. Press the MENU dial in to display the
The exposure indicator (00) appears in
main MENU in the viewfinder.
the viewfinder.
5. Adjust the exposure for a dark or
bright subject.
MENU
MENU END
• To brighten the image, rotate the
MENU dial up. You can adjust the
exposure to +06.
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
T30
AUTO
FAST
• To darken the image, rotate the
MENU dial down. You can adjust
the exposure to –06.
6. Press the MENU dial in to select an
3. Rotate the MENU dial to highlight
EXPOSURE and press the dial in to
display the EXPOSURE menu.
exposure.
7. Press MENU again to remove the
main MENU.
EXPOSURE
Notes: To return to auto exposure, select
AUTO in the EXPOSURE menu or set the
AE dial to AUTO.
AUTO
MANU
EXIT
4. Rotate the MENU dial to highlight
MANU (manual) and press the dial in.
Conditions Requiring Manual Exposure
• When recording with a bright back-
ground or reverse lighting.
• When recording with a very dark
background or very bright subject.
• When recording a reflective natural
background — such as a beach or
when skiing.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Fade In or Out
You can add a professional touch to your recordings when you fade in and out
of scenes. The picture gradually appears or disappears. The speed of the fade
is controlled by the camcorder.
S
U A
I C K R E
P /
U
Q
Y
L
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
I
T
L
T
N
AU
O
R
T
O
F
TITLE
T
ADE
F
SEPIA
H
B
G
A
I
L
K
W
1 / 1 0 0 0
SHD
HAZE
FADE
Button
To Fade In or Out
1. Set POWER switch to CAMERA.
You can activate fading during record-
pause or recording.
Notes: Press and hold the thumb trigger to
record a black screen.
The screen becomes slightly reddish if fade is
used with the sepia feature.
EFFECT
If the haze feature is selected, fading is in and
out from a white screen.
FADER
BK
BK
To Turn Off the Fade Feature
2. Press the FADE button.
appears briefly and then
in the viewfinder.
B
K
FADER
remains
Press the FADE button while
in the viewfinder. OFF appears briefly
when the fade feature is turned off.
appears
BK
B
K
3. Press the thumb trigger to start or stop
recording. The camcorder fades in or
out of the scene.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
AE Dial
The AE dial lets you select one of several different effects. Turn the dial to
select the effect you want. The name and indicator for the effect appears briefly
and then the indicator remains. There are no indicators for AUTO or MAN. Set
the AE dial to MAN for normal recording.
U
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
H
G
T
AU
AE Dial
R
T
O
TITLE
ADE
B
F
SEPIA
W
1 / 1 0 0 0
SHD
AU
T
O
T
FADE
TITLE
SEPIA
I
W
SHD
1 / 1 0 0 0
H
AZE
Mode
Name
and Indicator
Uses
Places camcorder in full auto mode. Time and date displays,
title, manual focus, manual exposure, and manual white
balance will not operate.
AUTO LOCK
AUTO
MAN
Use this mode for recording using some of the manual
features.
AUTO RELEASE
Use to capture fast-moving action with less blurring. Use
when playing back a recording on a VCR featuring special
effects, such as pause or slow motion.
SPORTS
Use when subjects are in front of a window or have the sun
to their back. Compensates for subjects appearing too dark
because of backlighting.
BACK LIT
Use when there is a strong front light on the subject such as
spotlights. Compensates for subjects appearing too light
because of strong front lighting.
FRONT LIT
Sets shutter speed to 1/1000. Use to record faster moving
action than sports mode with less blurring. Use when
playing back a recording on a VCR featuring special effects,
such as pause or slow motion.
1 S 1/1000
HZ:HAZE
1/1000
Use to soften the image and give the picture a misty white
effect.
HAZE
SHDW
SEPIA
Use to counter effects of glare and darken the picture with a
black mist.
Picture is recorded in sepia (brownish red) and offers the
vintage look of old movies.
SD:SHADOW
SEPIA
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Front Light and Back Light
The camcorder adjusts the light automatically under normal conditions. You
might need to adjust for a strong front light or back light (such as spotlights
or subjects standing in front of a window with the sun at their backs). You
can adjust for a strong front or back light using the AE dial, FRONTLIGHT
button, or BACKLIGHT button.
U I C K R E
L
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
FRONTLIGHT Button
N
P
S
G
AU
R
T
O
TITLE
ADE
B
F
SEPIA
W
1 / 1 0 0 0
SHD
AU
T
O
T
FADE
TITLE
SEPIA
AE Dial
I
W
SHD
1 / 1 0 0 0
BACKLIGHT Button
To Use the AE Dial
•
•
•
To compensate for a strong front light,
press and hold the FRONTLIGHT
•
•
•
To compensate for a strong front light,
place the AE dial in front light ( ).
FRONT LIT appears briefly and then
remains in the viewfinder.
button.
and the exposure indicator
(-02) appear in the viewfinder.
Note: The exposure indicator shows a
setting two steps lower (up to -06) than the
current exposure setting.
To compensate for a strong back light
place the AE dial in back light ( ).
BACK LIT appears briefly and then
remains in the viewfinder.
To compensate for a strong back light,
press and hold the BACKLIGHT
Set the AE dial to AUTO to turn off the
front or back light feature.
button.
and the exposure indicator
(+02) appear in the viewfinder.
Note: The exposure indicator shows a
setting two steps higher (up to +06) than
the current exposure setting.
To Use the FRONTLIGHT or
BACKLIGHT Button
Release the button to turn off manual
front or back light.
You may want to temporarily adjust for a
strong front or back light using the
FRONTLIGHT or BACKLIGHT button.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Travel Tips
• Write down your camcorder’s serial
number and keep it separate from the
camcorder when traveling. If your
camcorder is lost or stolen, you will be
able to identify it.
• Make sure you have any plug adapters
that you might need before taking your
camcorder to other countries. Consult
your dealer for advice.
• Carry your camcorder in a carrying
case when traveling. See page 70 for
a case designed especially for this
camcorder. An ordinary suitcase or
carry bag does not offer the protection
your camcorder needs. Treat your
camcorder as carry-on luggage to
protect it from rough handling.
• Use extra care to avoid damage to your
camcorder and accessories when
operating them at a beach or pool.
Spray, sand, and dust should be
avoided. If your lens has been exposed
to the elements, clean it only with
proper lens cleaning supplies.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Titles — Recording
The title feature lets you choose one of eight preset titles or create your own
title — up to 18 characters. You must install the clock cell battery as shown on
page 17 before you can create or store your own title.
DATE/TIME Button
I C K R E
U
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
ADE
F
SEPIA
TITLE Button
W
1 / 1 0 0 0
SHD
MENU Dial
(Rotate or Press In)
Record a Preset Title or Title You Create
1. Make sure the camcorder is in record-
pause and the AE dial is not set to
AUTO.
SOMEONE SPECIAL
VACATION
SUPER STAR
FIRST
2. Repeatedly press TITLE to select one
of the preset titles or the title you
created.
Title you Created
Title Off – No Title
3. Start recording. The title is
superimposed and recorded on your
tape whenever it appears.
4. Press TITLE to remove the title from
the viewfinder when you are finished
recording it.
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS
OUR FAMILY
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Create Your Own Title
1. Make sure the camcorder is in record-
pause and the AE dial is not set
to AUTO.
where you want the character to
appear.
6. When the box is highlighted, rotate
the MENU dial to select a character.
Press the MENU dial in to place the
character in your title.
2. Press the MENU dial in to display the
main MENU in the viewfinder.
MENU
7. Repeat steps 5 and 6 until you
complete your title.
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
Note: To erase a previous title, rotate the
MENU dial to highlight CLEAR, and press
the MENU dial in to erase the title.
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
T30
AUTO
FAST
To change or delete a character, highlight
BACK or NEXT and press the MENU dial
in to highlight the character you want to
change. Rotate the MENU dial to select
the new character (or blank space) and
press the MENU dial in to select the new
character.
3. Rotate the MENU dial to highlight
NEXT. The second MENU will
appear. Keep rotating the MENU dial
to highlight CHARACTER.
CHARACTER
A
K
B
L
C
M
W
I
’
3
D
N
X
E
O
Y
F
P
Z
G
Q
H
R
I
J
S
˙˙ ˙˙ ˙˙
BACK
T U
V
A
O
U
`
:
0
`
`
`
`
OFF
OFF
ON
REC TIME
A E
O
U
Ñ Æ Ø
/
5
Å
¿
8
&
♥
9
.
1
,
-
!
6
?
7
INT. TIME
2
4
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
T A Y L O R I S FOUR !
BACK NEXT EXIT CLEAR
07
OFF
8. When you are finished, rotate the
MENU dial to highlight EXIT and
press the MENU dial in twice to
remove the menu.
MENU END
4. Press the MENU dial in to display the
CHARACTER menu.
To record your title, press the TITLE
button until your title is displayed as
described on the previous page. To
record your title and a preset title,
display the preset title and press DATE/
TIME to display your title as described
on pages 20-21.
CHARACTER
A
K
B
L
C
M
W
I
’
3
D
E
F
G
Q
H
R
I
J
N O P
S
˙˙ ˙˙ ˙˙
T U
V
X
Y
Z
A
O
U
`
:
0
`
`
`
`
A E
O
U
Ñ Æ Ø
/
5
Å
¿
8
&
♥
9
.
1
,
-
!
6
?
7
2
4
BACK NEXT
EXIT CLEAR
To Stop Recording Your Title
Press the DATE/TIME button and/or
TITLE button to remove the title from the
viewfinder.
5. Rotate the MENU dial to highlight
BACK or NEXT. Repeatedly press the
MENU dial in to highlight the box
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Self-Timer Recording
You can set the self-timer to delay recording so you can be in the scene
when recording begins.
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
MENU Dial
(Rotate or Press In)
Tally
Light
To Set the Self Timer
1. Make sure the camcorder is in record-
pause and the AE dial is not set
to AUTO.
MENU
MENU END
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
AUTO
AUTO
NOV 18.98
OFF
2. Press the MENU dial in to display the
main MENU in the viewfinder.
T30
AUTO
FAST
ZOOM SPEED
NEXT
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Self-Timer Recording (continued)
3. Rotate the MENU dial to highlight
NEXT. The second MENU appears.
Keep rotating the MENU dial to
highlight INT. TIME.
6. Press the MENU dial twice to exit the
menu.
7.
and the amount of delayed
recording time appear in the
viewfinder.
BACK
REC TIME
OFF
OFF
ON
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
07
OFF
15S
MENU END
4. Press the MENU dial in to display the
INT. TIME menu.
8. Press the thumb trigger to start
recording.
INT. TIME
Note: The tally light flashes. About five
seconds before recording begins, the tally
light starts flashing faster. When the
camcorder starts recording, the tally light
stops flashing.
OFF
15 S
30 S
1 MIN
5 MIN
9. To stop self-timer recording, press the
thumb trigger.
EXIT
Note: To turn off self-timer recording
before it starts, press the thumb trigger
and set the interval time on the INT. TIME
menu to OFF.
5. Rotate the MENU dial to highlight
the desired time (15S, 30S, 1 MIN,
or 5 MIN).
• Select 15S to delay the recording
for 15 seconds.
• Select 30S to delay the recording
for 30 seconds.
• Select 1MIN to delay the recording
for one minute.
• Select 5MIN to delay the recording
for five minutes.
• Select OFF if you do not want the
camcorder to delay recording.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Animation Recording
You can produce an illusion of movement for an otherwise stationary scene
or object by shooting a series of pictures of slightly different poses (such as
cartooning).
SP/SLP
Button
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
MENU Dial
(Rotate or Press In)
Tally
Light
To Record Using Animation
1. Make sure the camcorder is in record-
pause and the AE dial is not set
to AUTO.
3. Press the MENU dial in to display the
main MENU in the viewfinder.
MENU
2. Press and hold SP/SLP to select SP.
SP appears in the viewfinder.
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
T30
AUTO
FAST
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Animation Recording (continued)
4. Rotate the MENU dial to highlight
NEXT. The second MENU appears.
Keep rotating the MENU dial to
highlight REC TIME.
• Select OFF if you do not want to
record for a selected amount of
time.
7. Press the MENU dial twice to exit the
menu.
8.
and the amount of recording
time appear in the viewfinder.
BACK
OFF
OFF
ON
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
07
OFF
MENU END
5. Press the MENU dial in to display the
5S
REC TIME menu.
REC TIME
9. Press the thumb trigger to start
recording.
OFF
1/4 S
1/2 S
1 S
Note: The recording stops automatically
after the selected period of recording
time. You might want to take two to five
shots of the subject in the same position.
5 S
EXIT
10. Move the subject and repeat step 9
for the desired number of shots.
6. Rotate the MENU dial to highlight
the amount of time you want the
camcorder to record.
11. To stop animation recording, set
the time in the REC TIME menu
to OFF.
• Select 1/4S to record for 1/4
second.
• Select 1/2S to record for 1/2
second.
• Select 1S to record for one second.
• Select 5S to record for five seconds.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Time-Lapse Recording
You can make automatic recordings at preset time intervals. The recording
shows subtle changes (such as shifts in cloud formations or plant growth)
when it remains focused on an object.
SP/SLP
Button
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
AU
T
O
TITLE
ADE
F
SEPIA
W
MENU Dial
(Rotate or
Press In)
1 / 1 0 0 0
SHD
Tally
Light
To Record Using Time Lapse
1. Make sure the camcorder is in record-
pause and the AE dial is not set
to AUTO.
Keep rotating the MENU dial to
highlight INT. TIME.
2. Press and hold SP/SLP to select SP.
BACK
SP appears in the viewfinder.
REC TIME
OFF
OFF
ON
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
3. Press the MENU dial in to display the
main MENU in the viewfinder.
07
OFF
MENU
MENU END
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
5. Press the MENU dial in to display the
INT. TIME menu.
T30
AUTO
FAST
INT. TIME
OFF
15 S
4. Rotate the MENU dial to highlight
30 S
1 MIN
5 MIN
NEXT. The second MENU appears.
EXIT
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Time-Lapse Recording (continued)
• Select 1/4S to record for 1/4
6. Rotate the MENU dial to highlight
the desired time between recordings
(15S, 30S, 1 MIN, or 5 MIN).
second.
• Select 1/2S to record for 1/2
second.
• Select 15S to delay the recording
for 15 seconds.
• Select 1S to record for one
second.
• Select 30S to delay the recording
for 30 seconds.
• Select 5S to record for five
seconds.
• Select 1MIN to delay the recording
for one minute.
• Select OFF if you do not want
to record for a selected amount
of time.
• Select 5MIN to delay the recording
for five minutes.
• Select OFF if you do not want the
10. Press the MENU dial twice to exit the
camcorder to delay recording.
menus.
7. Press the MENU dial in to display the
second MENU. Rotate the MENU
dial to highlight REC TIME.
and the amount of recording time
and
and the amount of interval
time between recordings appear in
the viewfinder.
BACK
OFF
OFF
ON
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
07
OFF
15S
5S
MENU END
8. Press the MENU dial in to display the
11. Press the thumb trigger to start
recording.
REC TIME menu.
Note: The camcorder starts and stops
recording the selected amount of time.
The tally light flashes with the flash
speed increasing five seconds before
recording begins.
REC TIME
OFF
1/4 S
1/2 S
1 S
5 S
12. To stop recording, place the
camcorder in record-pause, and set the
REC TIME and INT. TIME in the
second MENU to OFF.
Note: Fade does not operate during animation
or time-lapse recording.
EXIT
9. Rotate the MENU dial to highlight
the amount of time you want the
camcorder to record.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Tally Light (Turn On or Off)
You can turn the tally light on or off using the second MENU.
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
H
AU
T
O
TITLE
MENU Dial
(Rotate or
Press In)
ADE
F
SEPIA
Tally Light
W
1 / 1 0 0 0
SHD
To Turn the Tally Light On or Off
1. Make sure the camcorder is in record-
pause and the AE dial is not set
to AUTO.
4. Press the MENU dial in to display the
TALLY LAMP menu.
TALLY LAMP
2. Press the MENU dial in to display the
ON
OFF
main MENU in the viewfinder.
MENU
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
EXIT
T30
AUTO
FAST
5. Rotate the MENU dial to highlight
OFF or ON. Press the MENU dial in
to select ON or OFF.
3. Rotate the MENU dial to highlight
NEXT. The second MENU will
appear. Keep rotating the MENU dial
to highlight TALLY LAMP.
• Select ON if you want the tally
light to light during recording.
• Select OFF if you do not want the
tally light to light during recording.
6. Rotate the MENU dial to highlight
EXIT and press the dial in twice to
remove the menus.
BACK
OFF
OFF
ON
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
07
OFF
MENU END
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Demo Mode
You can turn on the DEMO mode in the second MENU to have a demonstration
of some of the camcorder’s features.
I C K R E
U
Y
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
MENU Dial
(Rotate or
Press In)
N
P
H
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
To Turn the Demo Mode On
1. Make sure the camcorder is in record-
pause and the AE dial is not set
to AUTO.
5. Press the MENU dial in to display the
DEMO MODE menu.
DEMO
2. If a cassette is inserted, remove the
OFF
ON
safety tab or set it to REC OFF.
3. Press the MENU dial in to display the
main MENU in the viewfinder.
MENU
EXIT
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
6. Rotate the MENU dial to highlight
OFF or ON. Press the MENU dial in
to select ON or OFF.
T30
AUTO
FAST
• Select ON if you want the cam-
corder to demonstrate some of the
recording features.
Note: Zoom is the only feature that
operates during the demo mode.
4. Rotate the MENU dial to highlight
NEXT. The second MENU appears.
Keep rotating the MENU dial to
highlight DEMO MODE.
• Select OFF if you do not want a
demonstration.
7. Rotate the MENU dial to highlight
EXIT and press the dial in twice to
remove the menus.
BACK
OFF
OFF
ON
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
To Turn the Demo Mode Off
Turn off the camcorder.
07
OFF
MENU END
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
JLIP (Joint Level Interface Protocol) Identification
Number
You can connect a device, such as a home computer, to the JLIP
connector on the camcorder.
MENU Dial
(Rotate or
Press In)
VCR
POWER
OFF
CAMERA
JLIP Connector
(Under Cover)
To Select a JLIP ID NO.
1. Make sure the camcorder is in record-
pause and the AE dial is not set
to AUTO.
4. Press the MENU dial in to display the
JLIP ID NO. menu.
JLIP ID NO.
ID NO. 84
2. Press the MENU dial in to display the
main MENU in the viewfinder.
MENU
MENU END
AUTO
AUTO
NOV 18.98
OFF
FOCUS
EXPOSURE
DATE/TIME
TELE MACRO
TAPE LENGTH
M.W.B.
ZOOM SPEED
NEXT
EXIT
T30
5. Press the MENU dial in to start the ID
NO. (numbers) flashing. Rotate the
MENU dial to select a number from
01 to 99. Press the MENU dial in to
select a JLIP number.
AUTO
FAST
3. Rotate the MENU dial to highlight
NEXT. The second MENU will
appear. Keep rotating the MENU dial
to highlight JLIP ID NO.
Use the number you select to identify
your camcorder if you connect it to a
computer using the JLIP connector.
6. Rotate the MENU dial to highlight
EXIT and press the dial in twice to
remove the menus.
BACK
OFF
OFF
ON
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
07
OFF
MENU END
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Attach the Shoulder Strap
The camcorder’s shoulder strap is designed to let you carry the camcorder from
your shoulder and – when you are ready to shoot – bring the camcorder to shooting
position in one quick movement.
To Attach the Shoulder Strap
1. If the strap keeper
is over a double
section of the
4. Attach the other end of the strap to the
other shoulder strap attachment ring.
strap, slide the
strap keeper off the
end of the strap.
Replace the keeper
on the strap
between the buckle
and the end of the
strap as shown.
Keeper
5. Adjust the shoulder strap to the
desired length.
2. Loop the end of the strap over the top
of the shoulder strap attachment ring.
6. Slide both keepers up snugly against
the shoulder strap attachment rings to
prevent the strap from slipping.
Keeper
Buckle
Cautions: When carrying the
camcorder with the shoulder strap,
you may find it convenient to rotate
the viewfinder down and slide it to
the front. This helps prevent possible
damage to the viewfinder from
bumping against your body as you
move.
Attachment
Rings
3. Thread the end of the strap back
through the keeper and buckle
making sure it is threaded under the
outer strap. Make sure the strap is
not twisted.
Make sure the shoulder strap is
firmly attached before using it
to carry the camcorder.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Model CC6271 Only: Built-In Color Enhancement Light
Model CC6271’s built-in color enhancement light automatically adds more
light when needed. The POWER switch must be set to CAMERA to operate
the video light.
SP/SLP
TE/TIME
A
D
COUNTER R/M
ICK REC
U
Q
L
P
VCR
Video Light
M
A
AU
N
T
O
O
N
T
L
R
F
I
G
SEPIA
H
T
EJECT
F
A
D
E
T
I
T
L
E
B
A
C
K
L
H T
P
U I C K R E
I
G
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
H
A
Z
E
1
/ 1 0 0 0
OFF
AU
TO
ON
L
I
G
H
T
MA
N
P
H
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
LIGHT OFF•AUTO•ON
Switch
To Use the Light
Note: When the light is turned on, the
Set the LIGHT OFF•AUTO•ON switch.
camcorder may turn off if the battery’s power
is low even though the battery level indicator
is not flashing.
•
Set to ON to turn the light on.
Note: We recommend you set white
balance to :HALOGEN in the M.W.B.
menu when using the light.
Cautions:
•
Set to AUTO to have the light come on
automatically when the camcorder
senses there is insufficient light for the
best recording.
Do not operate the video light closer
than one foot to people or other objects.
The video light becomes very hot. Do
not touch it during operating or right
after using it. Serious injury may result.
Notes: If the lighting condition is unstable
the light might turn on and off. Set the
light to ON or OFF.
Do not place the camcorder in a
The light might stay on when using high
shutter speeds.
carrying case right after using the light.
Never operate the video light close to
flammable or explosive material.
•
Set to OFF to turn the light off. Turn
the light off when you are not
recording to save battery power.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Model CC6271 Only: Built-In Color Enhancement Light (continued)
Replace the Bulb Assembly
Carefully follow the instructions below.
Cautions
The video light and bulb need to cool for approximately 30 minutes after
the camcorder has been used before the bulb assembly is replaced.
Do not touch the light bulb with your fingers. If the bulb is accidentally
touched, wipe it with a soft cloth. A dirty bulb may cause smoke and have
a reduced service life.
To Replace the Bulb Assembly
3. Place the new bulb assembly into the
camcorder by inserting the top first
and then slide the assembly into
place.
1. Insert a flat nonmetallic object (such
as a plastic screwdriver) in the hole.
Bulb Assembly
Plastic
Screwdriver
S
U A
I
C
K
R
E
P /
Y L
U A
U
P /
Q
U
I
C
K
R
E
Y L
Q
A
T
E / T I M E C
O U N T E R
A
D
T
E / T I M E C
O U N T E R
A
D
S
P / S L P
S
P / S L P
MA
MA
N
N
P
H
P
H
I
T
T
L
T
N
I
T
T
L
T
AU
N
O
R
AU
O
T
T
R
O
F
O
F
T
T
I
LE
T
T
I
LE
A
D
E
F
A
D
E
F
S
E
P
I
A
S
E
P
I
A
H
B
H
I
G
B
A
L
G
K
A
I
K
L
W
W
1 / 1 0 0 0
1 / 1 0 0 0
S
H
D
S
H
D
H
AZE
H
AZE
2. Pull on the sides of the bulb
assembly and remove it from the
camcorder as shown.
S
U A
P /
U
I
C
K
R
E
Y L
Q
A
T
E / T I M E C
O U N T E R
A
D
S P / S L P
MA
N
P
H
I
T
T
L
T
N
O
AU
T
R
O
F
T
T
I
LE
A
D
E
F
S
E
P
I
A
H
B
G
A
I
K
L
W
1 / 1 0 0 0
S
H
D
H
AZE
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Use the Viewfinder for Playback
You can see tapes using the viewfinder. There is no sound during
viewfinder playback.
P
P
PLAY/PAUSE
Button
VCR
VCR
Button
VCR
Button
STOP Button
Eyepiece Focus
Control
U
I C K R E
U
L
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
Viewfinder
MA
N
P
S
T
N
AU
T
O
TITLE
T
ADE
F
SEPIA
H
B
A
K
W
1 / 1 0 0 0
SHD
EJECT
Switch
PUSH Button
To Play Back a Tape
1. Attach a power supply.
• Insert the cassette with the tape
wheel facing up and the tape
window facing out.
Attach the adapter/charger, charged
battery, or optional car cord.
• Press on the PUSH button to lock
2. Insert a tape.
the cassette compartment closed.
• Slide EJECT up to open the cassette
compartment.
3. Set the POWER switch to VCR.
• Turn the tape wheel on the cassette
to remove any slack from the tape.
The power indicator lights.
4. Adjust the viewfinder for a
comfortable viewing position.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Use the Viewfinder for Playback (continued)
• Turn the eyepiece focus control to
adjust the focus of the viewfinder
for your vision.
• During playback, use the playback
features on the following pages.
6. Press the STOP button when you
5. Press the PLAY/PAUSE button to
are finished.
begin playback.
• If necessary, adjust tracking.
Tracking
U I C K R E
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
MENU Dial
(Used for Tracking
During Playback)
N
P
H
AU
T
O
TITLE
ADE
F
SEPIA
W
1 / 1 0 0 0
SHD
(picture bouncing up and down). Some
“jitter” is normal.
During playback, streaks may appear in
the playback picture. Press the MENU
dial in to activate manual tracking. Rotate
it up or down to move the streaks up or
down and out of the picture.
Press the MENU dial in again to turn
automatic tracking back on. AT flashes in
the viewfinder during automatic tracking.
• During stop-action playback, rotating
the MENU dial while in manual
Note: The tracking buttons might have no
effect on tapes recorded on other camcorders
or VCRs.
tracking might reduce picture “jitter”
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback Features
P
P
PLAY/PAUSE Button
VCR
VCR
Button
VCR
Button
STOP Button
U
U I C K R E
L
Q
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
T
N
AU
T
O
TITLE
T
ADE
F
SEPIA
H
B
A
K
W
1 / 1 0 0 0
SHD
• For brief searching, press and hold
VCR button or VCR button for
more than two seconds.
Position the Tape
Set POWER switch to VCR and
press STOP.
• Release the button to return to normal
playback.
• Press and quickly release the VCR
button or VCR
button to rewind or
fast-forward the tape.
Stop-Action Pause
• Press STOP to stop the tape.
• During playback, press PLAY/PAUSE
to “stop the action” and view one frame
of the tape.
Visual Search
• During playback, press and release
• Press PLAY/PAUSE to return to normal
VCR
button or VCR
button if
playback.
you want to search the tape visually in
forward or reverse.
Caution: Pause is designed for momentary
interruptions and should not be used for an
extended period of time. If the camcorder
remains in pause for more than five minutes,
it enters the stop mode and turns off to
prevent excessive tape wear.
• Press PLAY/PAUSE to return to normal
playback.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback Features (continued)
P
P
PLAY/PAUSE
Button
VCR
VCR
Button
VCR
Button
STOP Button
COUNTER
R/M Button
U
U I C K R E
Q
L
T E / T I M E C O U N T E R
A
D
S P / S L P
MA
N
P
S
T
N
AU
T
O
TITLE
T
ADE
F
SEPIA
H
B
A
K
W
1 / 1 0 0 0
SHD
Time Counter
The time-counter display shows the actual time elapsed when playing back a
segment of tape. The memory-stop feature helps locate a certain point on the
tape. Turn memory stop on to stop the tape automatically during rewind or fast
forward when the time counter reaches M 0:00:00.
To Use the Memory-Stop Feature
1. Locate the place on the tape you want
2. Press COUNTER R/M for less than
to return to, set the POWER switch to
VCR, and press COUNTER R/M for
more than two seconds to reset the
counter to 0:00:00.
one second to turn the time counter’s
memory-stop feature on or off.
When memory stop is on, an M
appears before the time counter.
3. Continue to play the tape. When you
M 0:00:00
want to return to the place you
marked, press the STOP button.
4. Press VCR . The tape rewinds to
the time counter reading of
M 0:00:00.
Time Counter With Memory
Stop Turned On
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Use the Cassette Adapter
The camcorder uses a smaller size cassette, but records in standard VHS format. The
cassette adapter allows you to play your VHS-C cassettes in a VCR just like other
standard VHS cassettes.
Insert the VHS-C cassette into the cassette adapter. Insert the cassette adapter into the
VHS VCR like a normal VHS cassette.
Install Cassette Adapter’s Battery
Battery
Compartment
Cover
1. Remove battery compartment cover.
Notes: Replace the battery when the load time
becomes much longer than normal.
2. Install supplied “AA” battery so
positive (+) and negative (–) ends
align properly with (+) and (–)
terminals in battery compartment.
Remove the battery from the cassette adapter
if it is not used for a month or more. This
prevents possible damage from battery
leakage. If leakage occurs, wipe up the liquid
inside the compartment and replace the battery
with a new one.
3. Replace battery compartment cover.
Insert Cassette into Cassette Adapter
Tape Wheel
Cassette
Compartment
Lid
EJECT Switch
1. Before inserting the cassette into the
adapter, remove any slack in the tape
by turning the tape wheel on the side of
the cassette.
3. Insert the cassette with the tape
window on the left and facing up.
Allow the cassette to drop into the
adapter. Do not force the cassette.
2. Slide EJECT to the right to open the
cassette compartment lid.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Use the Cassette Adapter (continued)
Load Detector
4. Gently close the cassette compartment
lid until it locks into place. Make sure
the cassette reel area under the adapter
is free to turn while the cassette is
loading.
Caution: If the load detector is still
extending from the side of the cassette
adapter after you have attempted to load
the cassette, loading is not complete. Try
to load the cassette again. Attempting to
insert the cassette adapter into a VCR
with the load detector extending may
cause damage to the adapter and/or VCR.
Note: You should hear a whirring sound
while the tape loads. The adapter’s load
detector will automatically retract into the
adapter.
Remove Cassette from Cassette Adapter
Access Hole
Caution: Do not touch the
reels during loading and
unloading. It could cause
injury or damage the cassette
adapter or tape.
Reels
2. Use the access hole on the bottom of
the adapter to push the cassette up and
remove it from the adapter.
1. Slide the adapter’s EJECT switch to
the right. The load detector extends
from the side and the whirring sound
indicates the tape is being released
before the adapter’s cassette
3. Gently close the adapter’s cassette
compartment lid.
compartment lid opens.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback on TV (or VCR) with Audio/Video Inputs
To connect your camcorder to a TV monitor (or VCR) with audio/video inputs, you
need an optional audio/video cable, such as VH83 shown on page 72. If your TV is
already connected to a VCR, attach the camcorder to the VCR and watch what the
camcorder is recording or playing on the TV.
Back of
Mono VCR or
TV Monitor
White
Audio Plug
Audio/Video
Output Cable
(Optional)
AUDIO
IN
AUDIO Jack
VIDEO
IN
Yellow Video Plug
OR
Back of
Stereo VCR or
TV Monitor
White
Audio
Plug
Y-Adapter
(Optional)
Audio/Video
Output Cable
(Optional)
L
AUDIO
IN
VIDEO Jack
R
VIDEO
IN
Yellow Video Plug
Installation
1. Attach the white plug on one end of
the audio/video cable to the AUDIO
IN jack on the TV (or VCR).
2. Attach the yellow plug to the VIDEO
IN jack on the TV (or VCR).
3. Attach the white plug on the other end
of the audio/video cable to the AUDIO
jack (located under the small cover)
on the back of the camcorder.
Notes: If your cable does not have white
and yellow plugs, attach the same color to
the audio jacks.
If your TV (or VCR) has stereo AUDIO IN
jacks, attach the plug to the one labeled
MONO. If one is not labeled MONO, you
need a Y-adapter, such as AH25, shown on
page 72 to hear both channels.
4. Attach the yellow plug to the yellow
VIDEO jack on the camcorder.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback on TV (or VCR) with Audio/Video Inputs (continued)
Playback Operation and How to Copy Tapes on the VCR
1. A. Camcorder connected directly to
TV: Turn on the TV and tune it to
the video input channel.
• During playback, use the playback
features on pages 62-63.
4. To copy what the camcorder is
playing, place a blank cassette in the
VCR, and press the VCR’s RECORD
button.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line”
or “camera mode”. (If your VCR
does not have a “line” or “camera
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
Note: Make sure the memory-stop feature
is turned off (press COUNTER R/M) or the
camcorder enters play-pause when the
counter reaches M 0:00:00.
5. Press STOP when you are finished.
coming from the VCR.
2. Set the POWER switch to VCR to
turn on the camcorder. The power
indicator lights.
Caution: The unauthorized recording
of copyrighted material may infringe
the rights of others.
3. Press PLAY/PAUSE.
Viewing What the Camcorder is Seeing (or Recording)
1. A. Camcorder connected directly to
TV: Turn on the TV, and tune it to
the video input channel.
2. Set the POWER switch to CAMERA.
Note: Turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line”
or “camera mode”. (If your VCR
does not have a “line” or “camera
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
3. Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.
coming from the VCR.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback on a TV Without Audio/Video Inputs
To connect your camcorder to a TV without audio/video inputs, you need an optional
1CVA147C RF output adapter and an optional coaxial RF cable, such as VH82 or
VH90 shown on page 72. If your TV has audio and video inputs (or is connected to a
VCR), refer to pages 66-67.
VHF Antenna
Optional Coaxial
RF Cable
(such as VH82 or VH90)
OR
Back of TV
VHF
OR
Optional
Transformer
(Such as VH54)
VHF
AUDIO, RF DC
OUT, VIDEO Jacks
OR
RF Output
Adapter's Plug
OUT TO TV Connector
Optional
300-75 Ohm
VCR/TV Switch
Transformer
IN FROM ANT
Connector
Optional RF Output Adapter
(1CVA147C)
CH3/CH4 Switch
Installation
Note: If your TV has 300 ohm screw
1. Disconnect the VHF antenna from
your TV. Connect the antenna to the
IN FROM ANT connector on the RF
output adapter if you are going to
leave the adapter connected to the TV.
terminals, you need a 75/300 ohm
transformer, such as VH54, shown on
page 72.
3. Attach the RF output adapter’s plug to
the AUDIO, RF DC OUT, and VIDEO
jacks located under the small cover on
the back of the camcorder.
Note: If your VHF antenna is the flat
twin-lead type attached by two screws,
you need an optional 300/75 ohm
transformer.
2. Attach one end of the optional coaxial
RF cable to the OUT TO TV
connector on the adapter, and attach
the other end to the VHF input on
your TV as shown.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback on a TV Without Audio/Video Inputs (continued)
Playback Operation
4. Set POWER switch to VCR. Power
1. Set the CH3/CH4 switch on the RF
indicator lights.
output adapter to channel 3 or 4.
5. Press PLAY/PAUSE on the camcorder.
2. Turn on the TV, and tune it to the same
channel you selected with the RF
•
During playback, use the playback
output adapter’s CH3/CH4 switch.
features described on pages 62-63.
3. Place adapter’s VCR/TV switch in
6. Press STOP on the camcorder when
VCR.
you are finished.
Seeing What the Camcorder Is Recording
1. Turn on the TV and tune it to channel
3 or 4. Turn the TV’s volume down to
prevent a high-pitched squeal caused
by feedback.
3. Set adapter’s VCR/TV switch to VCR.
4. Set POWER switch to CAMERA.
Power indicator lights.
5. Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording)
on the TV screen.
2. Set the CH3/CH4 switch on the RF
output adapter to the same channel
you selected on the TV.
Normal TV Viewing
For normal TV viewing, leave the RF
output adapter hooked up to the TV.
Disconnect the adapter’s plug from the
camcorder and place the adapter’s VCR/
TV switch in TV.
Note to Cable TV Installer
This reminder is provided to call your attention to Article 820-40 of the
National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that
provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building as
close to the point of cable entry as practical.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
We invite you to take a look at some great ideas for sparking creativity and adding to
the fun of using your compact VHS camcorder. The following pages have a selection
of accessories to help make your memorable moments look and sound even better.
These accessories are designed to make the process of recording and watching your
videos more enjoyable.
To order accessories, contact your local Dealer.
If a dealer is not nearby, all accessories are available through toll-free ordering or by
using the order form on page 73.
AC201A Soft Carrying Case
DCC08 Car Cord Adapter
Do not use any other car cord
with this camcorder.
Custom compact soft case designed
This car cord adapter enables you to
especially to provide protection and utility operate your camcorder from your car,
for your compact VHS camcorder and
most accessories. Rugged fabric lined
with soft non-abrasive material and
generous padding. Has three outside
pockets with storage for lens filters,
adapters, batteries, and tapes.
truck, or RV by plugging the car cord
directly into the vehicle’s cigarette lighter
socket. The DCC08 is designed
specifically to convert power from a
12-volt battery to a 6-volt output.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
FB1260 and FB120 Rechargeable
Batteries
Using the Optional AC088 Tripod
Mounting the camcorder on a tripod, such
as AC088, keeps the camcorder steady
and produces excellent video results.
This tripod’s fluid-effect head provides
smooth camera pan and tilt. The quick-
release mount makes it easy to attach or
remove the camcorder. The grooved,
tubular 3-section leg design folds down to
26" when not in use. Rubber feet allow
for sure footing.
These rechargeable nickel-cadmium
batteries are designed specifically for long
life. The FB1260 is a 1-hour battery. The
FB120 powers your camcorder twice as
long as the FB1260 (depending on how
much you use zoom and pause). Both can
be recharged with the AC adapter/charger
that came with your camcorder.
U
I
C
U
K
R
E
Y
Q
T
E A / T I M E C O U N T E R
D
S
P
/
S
L
P
MA
H
S
N
U
P
A
U
T
O
T
I
T
L
E
D
E
FA
S
E
P
I
A
W
1 / 1 0 0 0
S
H
D
CPS91 AC Battery Charger
The CPS91 battery charger plugs directly
into an AC outlet and charges the
FB1260, BB700, and FB120 camcorder
batteries. Because the CPS91 operates on
100-240 Volts, 50/60 Hz, it can be used
virtually anywhere in the world. A plug
adapter might be required in some
countries. Charging takes approximately
seven hours for the FB1260 (1-hour
battery), 11 hours for the BB700, and 13
hours for the FB120 (2-hour battery).
Cautions: Before using a tripod, make sure
it is stable enough to hold the camcorder
without falling over. Do not transport the
camcorder attached to the tripod.
When attaching your camcorder to a tripod,
be careful not to force the tripod screw into
the camcorder’s tripod mounting hole.
The tripod screw should not protrude into the
camcorder more than approximately three-
eighth (3/8) inch. Forcing the screw could
damage the mounting hole on the bottom of
the camcorder.
All specifications and descriptions
of accessories are subject to change
without notice.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
1CVA147C RF Output Adapter
VH54 Cable Transformer
This 75-to-300 ohm transformer is used to
connect a standard 75-ohm antenna cable
(such as VH82 or VH90) to the 300 ohm
screw terminals on a TV.
This RF output adapter is used with a
coaxial RF cable, such as VH82 or VH90,
to connect your camcorder to a standard
TV (one without audio/video inputs) for
playback. If your antenna cable is the flat
twin-lead type attached by two screws,
you need a 300-to-75 ohm transformer. If
your TV has 300 ohm antenna screw
terminals, you need an optional 75-to-300
ohm transformer such as VH54.
VH83 Audio/Video Cable
Coaxial RF Cables
This six foot audio/video cable can be
used to connect the camcorder to a TV
monitor or VCR for tape playback or
copying tapes.
VH82 (6-ft)
VH90 (12-ft)
These RF cables are used with the RF
output adapter to connect your camcorder
to a standard TV (one without audio/video
input jacks) for playback. If your TV has
300 ohm antenna screw terminals, you
need an optional 75-to-300 ohm
AH25 Y-Adapter
transformer such as VH54. If your
antenna cable is the flat twin-lead type
attached by two screws, you need an
optional 300-to-75 ohm transformer.
This Y-adapter allows you to connect your
camcorder’s mono audio cable to a stereo
TV or VCR.
All specifications and descriptions of accessories
are subject to change without notice.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form
Order Form for Camcorder Model CC6151/CC6251/CC6271
Description
Part No.
AC088
AC201A
ACS091
AH25
Price
Qty.
Total
Super Lightweight Tripod
Soft Camcorder Case
Shoulder Strap
$ 39.95
$ 39.95
$ 12.95
Y-Adapter
$
2.95
AC Battery Charger
Car Cord Adapter
CPS91
DCC08
FB120
FB1260
VH54
$ 59.95
$ 89.95
$ 89.95
$ 49.95
Rechargeable Battery (Extended)
Rechargeable Battery (Standard)
75-300 Cable Transformer
Coaxial RF-Cable
Audio/Video Cable
Coaxial RF-Cable
RF Output Adapter
AC Adapter/Charger
and
$
$
$
$
2.95
6.95
5.95
7.95
VH82
VH83
VH90
1CVA147C $ 59.95
241017
$126.55
DC Cable
233087
232845
$ 27.80
$ 71.35
$
Cassette Adapter
Bulb Assembly (Model CC6271)
Prices are subject to change without notice.
Total Merchandise ........................................................................................... $_________
Sales Tax .......................................................................................................... $_________
We are required by law to collect the appropriate
sales tax for each individual state, county, and
locality to which the merchandise is being sent.
Shipping and Handling .................................................................................... $
5.00
Total Amount Enclosed ................................................................................. $_________
Use VISA, MasterCard, or Discover.
Money order or check must be in U.S.
currency only. No COD or cash.
Please complete other side also
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form
Charge your order on your VISA,MasterCard,
or Discover Card by filling in below
USE YOUR CREDIT CARD
IMPORTANT: Copy complete account number from your VISA card
®
Expiration date:
IMPORTANT: Copy complete account number from your MasterCard
s
r
r
TM
Expiration date:
Copy Number above your name on MasterCard
IMPORTANT:
Copy complete account number from your Discover Card
Expiration date:
AUTHORIZED SIGNATURE
Prices are subject to change without notice.
A complete and correct order will
save you days of waiting.
Print or type your name and
address clearly.
Name:
Street:
Apt:
Zip:
City:
State:
Please make sure that both sides of this form have been filled out completely.
• Allow 4 weeks for delivery.
• All accessories are subject to availability.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form
To order accessories, contact your local Dealer.
If a dealer is not nearby, you can also follow the directions below to order by
telephone or direct-by-mail.
United States and Canada Orders
To place your order by phone, have your Visa, MasterCard, or Discover card ready
and call the toll-free number listed below between 8 AM and 10 PM (EST)
Monday through Friday or between 9AM and 5PM (EST) Saturday.
Use this number only to place an order for accessory items listed on
this order form.
1-800-338-0376
To place your order by mail, detach and mail the completed order form with credit
card information, money order, or check in U.S. currency (made payable to
Thomson Consumer Electronics, Inc.) to the following address:
Video Accessories
PO Box 8419
Ronks, PA 17573
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Troubles sometimes are caused by simple “faults” that you can easily correct without
the help of a service technician by first checking a few basic remedies.
Before you call or take your camcorder to an Authorized RCA Camcorder Service
Center, look below for the type of trouble you are experiencing. Then perform the
simple checks and adjustments listed for that trouble.
If service should be necessary, the warranty information lists what your warranty
covers and explains how to get service.
Trouble
Checks and Adjustments
No power
•
Set the POWER switch to CAMERA or VCR to turn on
the camcorder. The power indicator lights.
If using battery, it might need to be recharged.
If using AC adapter/charger, make sure it is plugged
into a working outlet.
•
•
Won’t record or
playback
•
•
If using AC adapter/charger, make sure it is plugged
into a working outlet.
If the dew indicator ( ) flashes in the viewfinder, there
is moisture in the camcorder. Wait until the dew
indicator no longer appears before operating the
camcorder.
•
Make sure POWER switch is set to correct position for
desired operation.
•
•
•
•
There might not be a cassette in the camcorder.
Try ejecting and reinserting the cassette.
The cassette tape might be broken, try another cassette.
You might have reached the end of the cassette, try
rewinding it.
Won’t playback
Won’t record
•
POWER switch must be set to VCR position.
•
•
Safety tab removed or closed. (See page 22.)
POWER switch must be set to CAMERA.
No picture
•
•
Open lens cover.
Camcorder turns
itself off
Set POWER switch to OFF and then to CAMERA or
VCR to turn back on. If camcorder is left in record-
pause or play-pause for several minutes, it turns off to
prevent tape wear.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Trouble
Checks and Adjustments
Tape stops during
rewind or fast
forward
•
Time-counter memory might be on. Whenever an “M”
appears with the time-counter display, the camcorder
stops rewinding (or fast forwarding) when counter
reads M 0:00:00. Press VCR
or VCR
again to
continue rewinding or fast forwarding, or press
COUNTER R/M to turn off the memory-stop feature.
Camcorder remains in
pause mode
•
•
Press PLAY/PAUSE to return to normal playback.
Dew indicator flashes
in viewfinder
If the dew indicator ( ) flashes in the viewfinder,
there is moisture in the camcorder. Wait until indicator
no longer appears before operating the camcorder.
Poor auto-focus
operation
•
•
•
Subject is dark or behind glass. Auto-focus may not
work under these conditions. Rotate AE dial to MAN
and focus manually. See pages 36-37.
Subject is not in center of viewfinder or two subjects
are at different distances. Rotate AE dial to MAN and
focus manually. See pages 36-37.
Lens is smudged, and image appears unfocused.
Viewfinder displays
are out of focus
•
•
•
Lens is smudged and image appears unfocused.
Eyepiece focus control is misadjusted.
The small C (color) and B (brightness) controls on the
bottom of the viewfinder control the color and bright-
ness of the viewfinder. These controls are set at the
factory and should require no adjustment. If the color
or brightness every does need adjustment, carefully use
a plastic screwdriver and make the adjustments with
caution to prevent damaging the miniature controls.
Picture is too dark or
subject too dark
•
•
•
For best results, only use higher shutter speeds
outdoors. Rotate AE dial to sports ( ) or 1/1000.
See page 43.
Subject in front of a strong backlight. Rotate AE dial
to select back lit ( ) or press BACKLIGHT button.
See pages 43-44.
Subject in front of a strong frontlight. Rotate AE dial
to select front lit ( ) or press FRONTLIGHT button.
See pages 43-44.
•
•
Rotate AE dial to MAN and adjust exposure manually.
See pages 40-41.
Model CC6271 Only: Turn on built-in light.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Trouble
Checks and Adjustments
Sound is too low or
distorted
•
Subject was too far from camcorder.
Picture recorded
with special effect
• AE dial might be turned to special effect mode.
Rotate the AE dial to AUTO. See page 43.
Colors do not look
natural on recording
•
•
•
•
Try adjusting white balance. See pages 38-39.
Title recorded on
tape
Title is recorded when it appears in viewfinder.
Remove the title. See pages 20-21 and 46.
Date and/or time are
recorded on tape
Displays are recorded on tape whenever they appear
in the viewfinder. Remove them from viewfinder
when recording. See pages 20-21.
When AUTO DATE is selected (AE dial in AUTO),
date display is automatically recorded when you
begin recording or change the cassette.
See pages 20-21.
Date and/or time are
incorrect
•
•
Clock lithium cell battery might need replacing.
See page 17.
Date or time might need to be set. See pages 18-19.
Cannot set REC or
INT. TIME for
animation or time-
•
•
Make sure there is a tape in the camcorder.
Check tape speed setting. Tape speed must be set
to SP for time-lapse or animation recording.
Make sure AE dial is not set to AUTO to display
MENU. See pages 50-53.
lapse recording
•
Tally light does not
light during
•
TALLY LAMP feature set to OFF in the TALLY LAMP
menu. See page 54.
recording
Vertical white lines
appear when shoot-
ing bright object
•
•
This might occur when the background extremely
contrasts with the subject.
Error number (E01,
E02, etc.) appears in
viewfinder
Try disconnecting power source. Wait ten seconds
and then connect power source again. If error
number does not disappear from viewfinder, consult
your Authorized RCA Camcorder Service Center.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Trouble
Checks and Adjustments
Model CC6271:
light turns on and
off
• Lighting condition changes frequently. Set LIGHT
AUTO•OFF•ON light switch to ON or OFF.
Streaks in picture
during playback or
play-pause
• Adjust tracking with MENU dial. See page 61.
Bright, crystal-
shaped spots in
viewfinder
•
•
Sunlight is directly entering the lens.
Colored bright
spots appear in
viewfinder
Models CC6251 and CC6271: Black spots or bright spots
of light (red, green, or blue) may appear. These spots are
not recorded on the tape and are not due to a defect.
Rechargeable
battery runs down
sooner than
•
•
If battery has not been used for some time, completely drain
the battery’s power and recharge it.
Battery run times are measured when the camcorder is
recording continuously. You can check your battery by first
fully charging it and then aiming the camcorder at a clock
and recording the picture of the clock. When the recording
stops, play the last recorded section and note the clock time.
A one-hour battery should give you about 60 minutes of
recording time. In practical use, you might not be able to
record for the full time because the camera uses battery
power when it is waiting between recordings (record-pause)
and zooming.
expected
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
Clean the Camcorder
To clean the camcorder’s exterior, remove
any power source connected to the
camcorder and gently wipe it with a clean
soft cloth.
Caution: Use of strong cleaning
products, such as those containing
alcohol or benzine, might damage
the camcorder.
Clean the Camcorder’s Lens
To clean the camcorder’s lens, blow it with a blower brush and gently
wipe the lens with cleaning tissue and commercially prepared cleaning
solution designed for use on camera lens. Improper cleaning might
scratch the lens.
U A
P /
U
I
C
K
R
E
Y L
A P
Q
T
E / T I M E C
O U N T E R
A
D
S
P / S L P
Caution: Do not touch the lens
with your fingers. The oil from
your skin might damage the lens.
MA
N
P
I
H
T
L
T
L
N
O
AU
T
R
O
F
T
T
ITLE
A
B
D
A
E
F
S
E
P
I
A
H
I
G
K
W
1 / 1 0 0 0
S
H
D
Lens
Clean the Camcorder’s Viewfinder
You can remove the viewfinder eyepiece for cleaning.
1. Turn the eyepiece counterclockwise
and pull it out.
2. Remove dust using a blower brush.
3. Reattach the eyepiece by aligning the
reference marks, and then turn the
eyepiece clockwise until it clicks.
Reference
Marks
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
Proper Care and Storage
• The camcorder might be damaged by
improper storage or handling. Do not
subject the camcorder to swinging,
shaking, or dropping.
• Keep dust and grit from entering the
camcorder’s cassette door. Dust and
grit are abrasive and cause excessive
wear to both the camcorder’s
recording/playback heads and
cassettes.
• Do not store the camcorder in
temperatures below -22°F (-30ºC) or
above 149°F (65ºC).
• When the camcorder is not in use,
always remove the cassette and AC
adapter/charger or battery.
• Always close the lens cover when the
camcorder is not in use.
• Before handling your camcorder, make
sure your hands and face are free from
any chemical products such as suntan
lotion, as it might damage the finish.
• Retain the original carton for future
storage or shipping purposes.
Things to Avoid
• Do not attempt to disassemble your
camcorder. There are no user-
serviceable parts inside.
• Do not operate the camcorder near the
ocean as salt water or salt water spray
might damage the internal parts of the
camcorder.
• Avoid operating your camcorder
immediately after moving it from a
cold location to a warm location. Give
the camcorder 1-1/2 to 2 hours to reach
a stable temperature before inserting a
cassette. When the camcorder is
moved from cold to warm,
• Do not operate the camcorder for
extended periods in temperatures
below 40°F (4ºC) or above 95°F
(35ºC).
• Do not expose the camcorder or
adapter/charger to rain or moisture.
If any component becomes wet, turn
off the power and take the unit to an
Authorized RCA Camcorder
Service Center.
condensation might cause the tape to
stick to the headwheel and damage the
headwheel or tape.
• Do not aim your camcorder at the sun
or other bright objects.
• Do not use an adapter/charger or
batteries other than the ones specified
for the camcorder. Use of the wrong
accessories might cause damage to the
camcorder.
• Do not leave your camcorder in direct
sunlight for extended periods of time.
The resulting heat buildup might
permanently damage the camcorder’s
internal parts.
• Do not operate the camcorder in
extremely humid environments.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirement: 6VDC
Power consumption:
Viewfinder
Models 6251 and 6271
.55" Color viewfinder
Model 6151
CC6151: 5.0 watts
CC6251: 5.1 watts
CC6271 (normal): 5.1
0.5" Black-and-white electronic viewfinder
Camera Section
CC6271 (light on): 8.0 watts
Weight: CC6151: 1.8 lbs. (800g)
CC6251: 1.8 lbs. (780g)
CC6271: 1.8 lbs. (790g)
Dimensions – Including Viewfinder:
Models 6251 and 6271
4-1/2" (W) x 4-5/8" (H) x 8-3/4" (D)
114 (W) x 117 (H) x 222 (D) mm
Model 6151
Image sensor: 1/4" CCD imager
Lens: F1.6, f=3.8 to 83.6mm
22:1 power zoom lens
Filter diameter: 46 mm
Tripod Mount
One 1/4" x 20 threaded hole
AC Adapter/Charger
4-1/2" (W) x 4-5/8" (H) x 9-9/16" (D)
114 (W) x 117 (H) x 242 (D) mm
Video Recorder Section
Format: VHS-C
Power requirement: 100-240 V,
50/60 Hz.
Power consumption: 23 watts
Weight: .71 lbs. (300g)
Dimensions:
Record/playback system:
Four video record/playback heads
One flying erase head
Video signal: EIA standard
NTSC color
5-9/16"(W) x 1-11/16"(H) x 2-11/16"(D)
140 (W) x 42 (H) x 68 (D) mm
Information to User
•
•
Increase the separation between the
equipment and receiver.
This equipment has been tested and found to
comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
•
Consult the dealer or an experienced radio/
TV technician for help.
Alterations or modifications carried out
without appropriate authorization may
invalidate the user’s FCC right to operate the
equipment.
This Class B digital apparatus meets all
requirements of the Canadian Interference —
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte
toutes les exigences du Réglement sur le
matériel brouilleur du Canada.
•
Reorient or relocate the receiving antenna.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Assistance and Service
Thomson provides a toll-free telephone
You can reach Thomson at the
following number:
number to help you with any problems you
may encounter with your camcorder. Many
can be diagnosed over the phone, and if
necessary, repair or replacement will be
arranged. Please have your camcorder model/
serial number and date of purchase ready
when you call. If your unit is out of warranty,
we will quote the cost of a repair or
800-283-6503
(Toll free inside U.S.A.)
Our toll-free Camcorder number
operates from 8 a.m. to 5 p.m., CST
Monday – Friday
for U.S. customers only
replacement unit to you.
Returning equipment to Thomson for repair or exchange
Always consult Thomson and get a Return
If we are unable to resolve your problem over
the phone, we will gladly service your unit or
exchange it for a new or refurbished
camcorder. Refer to the limited warranty on
the reverse side to learn about your specific
rights and responsibilities.
Authorization number before returning
anything! Obtain a Return Authorization
(RA) number from the telephone
representative before returning your
equipment to avoid delays, accounting errors,
or even loss of your unit.
Important information to customers who ship defective equipment to
Thomson Consumer Electronics
The Thomson representative who authorized
the return of your equipment will give you an
RA number over the phone. They will also
provide you with instructions on where and
how to return your Camcorder. Write the
number in large, clear characters on the
outside of the box. To avoid confusion and
misunderstandings, shipments without an RA
number clearly visible on the outside of the
box will be returned to you at your expense.
are located on the bottom of your unit.
If your Camcorder is within the warranty
period, please provide a copy of the bill of sale
to verify purchase date. Use the original box
and packing material to protect the equipment
from damage in shipment.
For your protection, insure all shipments for
full replacement value and use a reliable
shipper. Thomson assumes no responsibility
for warranty shipments from the customer to
the factory if not shipped in the manner
prescribed by Thomson.
Include a brief note describing the problem
and any conversations about the problem you
have had with Thomson personnel.
Include your name, address and model/serial
number of your Camcorder. These numbers
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
2. The exchange location will notify you of its
arrival.
What your warranty covers:
•
Any defect in materials or workmanship.
3. Take your unit, excluding all accessories,
and your evidence of purchase date, such as
a bill of sale, to the exchange location and
you will be provided the new or refurbished
unit.
For how long after your purchase:
•
•
90 days for labor charges.
One year for parts.
The warranty period for rental units begins
with the first rental or 45 days from date of
shipment to the rental firm, whichever
comes first.
4. If the repairs were covered by your
warranty, you will not be billed.
If you are not located near an exchange
point:
What we will do:
1. Provide your Discover, MasterCard, or Visa
account number and expiration date to our
phone representative. This is for security
purposes. If we receive your unit,
During the initial 90 days
•
Exchange your camcorder with a new or
refurbished unit, or repair your camcorder.
The option will be ours. There will be no
cost to you.
excluding all accessories, within 14 days
from the date you were provided the RA
number, only items not covered by
warranty will be charged to your account.
IF YOUR UNIT IS NOT RECEIVED
WITHIN 14 DAYS, THE SUGGESTED
RETAIL VALUE OF THE CAMCOR-
DER WILL BE CHARGED TO YOUR
CREDIT CARD. This amount will be
credited if the unit is subsequently
After the 90 days and within one year
•
Exchange your camcorder with a new or
refurbished unit, or repair your camcorder.
The option will be ours. Parts will be
provided at no charge, but you will be
responsible for the cost of labor required
for the repair.
How you get service:
received.
•
Call 1-800-283-6503 and have your unit’s
date of purchase and model/serial number
ready. The model/serial number
information is on the bottom of your
camcorder.
2. We will send you a replacement unit next
business day delivery in the continental
U.S.A.
3. You will receive an invoice packed with the
replacement product, but will not be
•
A representative will troubleshoot your
problem over the phone. If the
charged for the unit portion of the invoice
amount if we receive your unit within 14
days from the date you were provided the
RA number. Any labor and parts charges
not covered by our warranty will be
representative determines that you should
receive a replacement unit, you will be
provided with a Return Authorization (RA)
number and the location of a nearby
exchange point if one exists. No returns
will be accepted without the RA number.
included and charged against your account.
4. Ship the unit back to us, excluding all
accessories, using the replacement unit’s
carton. Shipping instructions will be
included in the carton along with your RA
number which will allow you to easily ship
the unit back to us. Make sure you insure
your shipment in case of damage or loss.
Include with the shipment:
To receive a replacement Camcorder
before you return yours:
If you are located near an exchange point:
1. We will send a replacement unit to the
exchange point next business day delivery
in the continental U.S.A.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
•
Evidence of purchase date, such as a
bill of sale, to verify your unit’s
warranty eligibility.
•
•
Take your unit to the Authorized RCA
Camcorder Service Center of your choice.
Show the Authorized RCA Camcorder
Service Center representative evidence of
purchase date, such as a bill of sale.
•
•
A brief note describing your
camcorder’s problem.
Your name, address and phone number.
•
Pick up your camcorder when repairs are
complete.
Return transportation, storage, handling, and
insurance costs are your sole responsibility.
We accept no liability in case of damage or loss.
What your warranty does not cover:
•
•
•
Adjustment of customer controls.
Damage from misuse or neglect.
To receive a replacement unit after we have
received your unit:
A unit that has been modified or
incorporated into other products or is used
for institutional or other commercial
purposes.
1. Write the RA number on the outside of
the carton used to return the unit.
Make sure you insure your shipment in
case of damage or loss.
•
•
•
Batteries for remote control and clock.
Cleaning of video/audio heads.
2. Carefully pack the unit, excluding all
accessories, using the original box and
packing material if possible.
Camcorders purchased or serviced outside
the U.S.A.
3. Include with the shipment:
•
Evidence of purchase date, such as a
bill of sale, to verify your unit’s
warranty eligibility.
•
•
Return transportation, storage and handling
costs of your unit, including insurance for
loss or damage.
•
•
A brief note describing your camcorder
problem.
Acts of God, such as but not limited to
lightning damage.
Your name, address and phone number.
Product Registration:
Return transportation, storage, handling, and
insurance costs are your responsibility. We
accept no liability in case of damage or loss.
•
Please complete and mail the Product
Registration Card packed with your
camcorder. It will make it easier to contact
you should it ever be necessary. The return
of the card is not required for warranty
coverage.
4. The representative will advise the address
to mail a cashier’s check or money order
for payment if there are any out of
warranty labor or parts charges and you
elect not to use your credit card.
How State Law relates to warranty:
5. Upon receipt of your product, a new or
refurbished unit will be shipped to you
next business day delivery in the
continental U.S.A.
•
This warranty gives you specific legal
rights and you also may have other rights
that vary from state to state.
If you purchased your camcorder outside
the United States:
To have your Camcorder repaired by an
Authorized RCA Camcorder Service
Center:
•
This warranty does not apply. Contact your
dealer for warranty information.
•
Check with your dealer or call 1-800-336-
1900 for the Authorized RCA Camcorder
Service Center nearest you.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Built-in light
1 S 1/1000 indicator 28, 43
(model CC6271) 58
Bulb for light, replacing
(model CC6271) 59
A
Accessories
included 3
optional 70
C
C (color) control
order form 73
(models CC6251 and CC6271) 11, 77
Cable TV installer note 69
Camcorder, cleaning 80
Camcorder’s operating controls 10
Camera edit feature 33
Car cord adapter 16
Accessory order form 73
Adapter/charger
charging battery 14
using 4, 12
AE dial
7, 8, 10, 18, 20, 21, 24, 32, 34, 35,
36, 38, 40, 43, 44, 46, 47, 48, 50, 52,
54, 55, 56
indicators 28, 43
features 43
Animation indicator 31, 51
Animation recording 50
Assistance 1, 3, 83
Attach shoulder strap, 57
Audio/video jacks 11, 66, 68
Auto date display 20, 32
Auto date feature 20, 32
Auto exposure 40
Care and maintenance
clean the camcorder 80
clean the camcorder’s lens 80
clean the camcorder’s viewfinder 80
proper care and storage 81
things to avoid 81
Care and storage
battery 15
camcorder 81
cassette 23
Cassette adapter 64
Cassette care and storage 23
Cassette compartment 11
Cassette warning 29
Auto focus 36
Auto head cleaner 33
AUTO indicator 28
AUTO mode 8, 32
Auto white balance 38
Automatic head-cleaning system 22
Cassettes
inserting and removing 23
Cassette's tape wheel 5, 23
Cautions i
CHARACTER menu 47
Checks and adjustments 76
Clean the camcorder 80
Clean the camcorder’s lens 80
Clean the camcorder’s viewfinder 80
Clock cell battery compartment 11, 17
Clock cell indicator 17, 31
Color enhancement light
(model CC6271) 10, 58
Contents 1
B
B (bright) control
(models CC6251 and CC6271) 11, 77
BACK LIT indicator 43, 44
Back-lit feature 43, 44
BACKLIGHT button 44
BATT. (battery) RELEASE button 11, 13
Battery
attaching and removing 13
care and storage 15
charging 14
level indicator 15, 29
refreshing 14
Copy tapes 67
COUNTER R/M button 10, 63, 67
Customer assistance and service 83
using 13
Battery, installing in cassette adapter 64
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
D
Date and time displays
setting 18
Date, time, and title displays
recording 20
DATE/TIME button 10, 20, 21, 29, 47
DATE/TIME menu 18
DC cable 12, 13, 14, 16
DC in jack 4, 12
AUTO RELEASE 43
BACK LIT 28, 43, 44
battery level 15
cassette warning 29
clock cell 17, 31
date display 29
exposure 30, 41, 44
focus 30, 37
FRONT LIT 28, 43, 44
HAZE 28
Demo mode 55
HZ:HAZE 43
DEMO MODE menu 55
Design specifications 82
Dew warning 30, 77
Displays, status 29
interval time 49, 53
LENS COVER 31
MAN 28
manual white balance 29
MWB 39
record time 51, 53
REFRESH 14
S 1/1000 28
E
EJECT button 5, 11, 23, 60
Erase protection 22
SD:SHADOW 28, 43
self-timer 31
SEPIA 28, 43
Exposure control 40, 41
Exposure indicator 41, 44
EXPOSURE menu 41
SPORTS 28, 43
TAPE END 25, 31
tape length 31
tape speed 31
time counter 31
Eyepiece focus control 6, 11, 27, 60
F
Fade/wipe feature 42
First time operation 3
Flying erase head 33
Focus indicators 30, 37
FOCUS menu 37
time display 29
time lapse 31, 53
time remaining 25, 31
title display 29
Focusing 36
tracking 29
FRONT LIT indicator 43, 44
FRONTLIGHT button 44
Full auto feature 32
white balance 39
zoom level 29, 34
Information to user 82
Inserting and removing cassettes 23
INT. TIME menu 49, 52
Interval indicators 49, 53
H
Handstrap 4, 11
Head cleaning 22, 33
HZ:HAZE indicator 28, 43
J
I
JLIP (joint level interface protocol)
identification number 56
JLIP connector 11, 56
JLIP ID no. 56
Indicators
1 S 1/1000 43
AE dial 28, 43
animation 31, 51
AUTO 28, 43
JLIP ID NO. menu 56
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
L
Lens 10
Lens cover 4
Playback features
memory-stop 63
position the tape 62
stop-action pause 62
LENS COVER control 4, 11
LENS COVER indicator 31
Light, color enhancement
(model CC6271) 58, 59
LIGHT OFF•AUTO•ON switch
(model CC6271) 11, 58
Limited warranty 84
time counter 63
tracking 61
visual searching 62
Playback on a TV without audio/video
inputs 68
Playback on TV (or VCR) with
audio/video in jacks 66
Playback speeds 22
Plug adapter, optional 12
Power indicator 5, 11, 16
POWER switch
Lithium cell
inserting and removing 17
Lithium cell indicator 17, 31
Low-contrast indicator 36
5, 9, 11, 13, 15, 16, 18, 20, 24, 29,
32, 33, 35, 36, 38, 40, 42, 58, 60,
62, 63, 67, 69
M
M.W.B. menu 39
Powering your camcorder
using adapter/charger 12
using battery 13
Main MENU 18, 24, 29, 35, 36, 38,
41, 47, 48, 50, 52, 54, 55, 56
MAN indicator 28
using optional car cord adapter 16
Preset title, recording 46
Problem solving 76
Manual exposure 40
Manual white balance 38
Memory stop 63
Product registration i
PUSH button 5, 11, 23, 60
MENU dial 7, 11, 18, 19, 24, 32, 34, 35,
36, 38, 41, 47, 48, 49, 50, 51, 52,
53, 54, 55, 56, 61
Microphone 10, 32
MWB indicator 39
Q
QUICK REC button 10, 33
Quick record feature 33
Quick review feature 33
O
Operating controls 10
R
Optional accessories 70
Optional plug adapter 12
Order form, accessories 73
RBRC seal 13
REC TIME menu 51, 53
Record indicator 8, 29
Record time indicators 31, 49, 51
Recording
P
Pause indicator 5, 8
Pause, stop-action 62
PLAY/PAUSE button 9, 10, 61, 62, 67, 69
Playback
animation 50
first time 3
self timer 48
time lapse 52, 53
titles 20, 46
Recording speeds 6, 22
REFRESH button 14
REFRESH indicator 14
Registration i
first 9
on a TV without audio/video inputs 68
on TV (or VCR) with audio/video
inputs 66
using cassette adapter 64
viewfinder 60
RF DC OUT jack 11, 68
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
RF output adapter, optional 68
Thumb trigger 11, 32, 33, 49, 51, 53, 67
Time counter 31, 63
Time display: 20
S
Time-counter display 31, 63
Time-lapse indicator 31, 53
Time-lapse recording 52, 53
Time-remaining display 24, 25, 31
Time-remaining feature 24
Tips
Safety information i
Safety precautions, battery 13
Safety tab 22
SD:SHADOW indicator 28, 43
Second MENU 47, 49, 51, 52,
53, 54, 55, 56
recording 26
travel 45
Self timer 48, 49
Self timer indicator 31, 49
SEPIA indicator 28, 43
Setting tape length 7
Shoulder strap, attach 57
Shoulder strap attachment rings 11, 57
Shutter speed indicator 43
SLP recording speed 6
SLP tape speed 6, 22
Solving problems 76
SP recording speed 6, 22
SP tape speed 6, 22
SP/SLP button 22, 24, 50, 52
Specifications 82
Speeds, recording and playback 22
Sports feature 43
TITLE button 29, 46, 47
Title display 20, 29, 46, 47
Titles
creating your own 47
recording preset 46
recording your own 20
Tracking 61
Tracking indicator 29, 61
Travel tips 45
Tripod, using 71
Trouble checks 76
U
Unpack camcorder and accessories 3
SPORTS indicator 28, 43
Status displays 29
STOP button 9, 10, 61, 62, 63, 67, 69
Stop-action pause 62
V
VCR buttons 9, 10, 33, 62, 63
Videocassettes 22
Viewfinder 6, 11, 27
adjust for viewing 27
eyepiece focus control 27
playback 60
T
Table of contents 1
Tally lamp feature 33, 54
TALLY LAMP menu 54
Tally light 8, 10, 32, 33, 49
Tally light feature 33, 54
Tape copying 67
Visual searching 62
W
Warranty, limited 84
White balance feature 38
White balance indicators 29, 39
TAPE END indicator 25, 31
Tape, inserting 5
Tape length feature 24
Tape length indicators 25, 31
TAPE LENGTH menu 7, 25
Tape length, set 7, 24
Tape wheel 5, 23
Tele macro feature 35
TELE MACRO menu 35
Tele macro zooming 35
Things to avoid 81
Z
Zoom buttons 11, 34, 36, 38
Zoom level indicator 29, 34
Zoom speed feature 34
ZOOM SPEED menu 35
Zooming 34
89
Download from Www.Somanuals.com. All Manuals Search And Download.
10330 N Meridian Street
Indianapolis, IN 46290
©
1998 Thomson Consumer Electronics, Inc.
®
Trademark(s) Registered
Marca(s) Registrada(s)
Printed in Japan
TOCOM 15331700
Download from Www.Somanuals.com. All Manuals Search And Download.
|