RCA Camcorder CC4251 User Guide

camcorder

user's guide

CC4251

Download from Www.Somanuals.com. All Manuals Search And Download.

Assistance

We want to make sure you enjoy your new camcorder. If you have any

questions, call:

Camcorder Exchange Warranty...........800-283-6503 (pages 55-56)

Customer Service...................................800-336-1900 (page 54)

Accessories............................................. 800-338-0376 (pages 41-47)

Table of Contents

Safety Information.............................. i

Powering Your Camcorder

• Use the Adapter/Charger to

Power Your Camcorder ............ 10

• Use the Battery to Power

First Time Operation

• Assistance ....................................... 3

• Unpack the Camcorder and

Your Camcorder .................. 11-13

• Charge the Battery .................... 11

• Attach the Charged Battery ...... 12

• Remove the Battery .................. 12

• Battery Level Indicator ............. 13

• Battery Care .............................. 14

• Battery Storage ......................... 14

• Battery Safety Precautions ....... 14

• Use the RCA Optional Car

Accessories ................................. 3

• Attach the Adapter/Charger ............ 4

• Adjust the Handstrap, Remove

Lens Cap, and Attach

It to Handstrap............................. 4

• Insert a Tape .................................... 5

• Turn on the Camcorder ................... 5

• Adjust the Viewfinder and

Eyepiece Focus Control .............. 6

• Start and Stop Recording ................ 6

• Play Back What you Have

Recorded .................................... 7

• Set the CAMERA/OFF/VCR

Switch to OFF............................ 7

• Replace the Lens Cap...................... 7

• Review Camcorder’s

Cord Adapter ............................ 15

Videocassettes

• Erase Protection ............................ 16

• Recording and Playback

Speed and Times ...................... 16

• Insert and Remove

Cassettes ................................... 17

• Cassette Care and Storage ............. 17

Operating Controls ..................8-9

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Date/Time Display

Playback

• Set the Time and Date ................... 18

• Record Time and Date, AUTO

Date, Auto TITLE, or Date ......... 19

• Charge the Built-in Clock

• Viewfinder Playback ..................... 33

• Playback Features

• Tape Positioning ....................... 34

• Visual Searching ....................... 34

• Stop-Action Pause .................... 34

• Tracking .................................... 35

• Playback on TV (or VCR) with

Audio/Video Inputs.............36-37

• Playback on TV Without

Battery ....................................... 19

Recording

• Use the Viewfinder...................20-21

• Adjust Viewfinder for

Convenient Viewing............. 20

Audio/Video Inputs .............38-39

• Eyepiece Focus Control............ 20

• Tilt Adjustment ......................... 21

• BRIGHT Control....................... 21

• Viewfinder Displays.................22-23

Attach the Shoulder Strap .............. 40

Optional Accessories...................41-47

• Use a Tripod .................................. 42

• Remove the Lens Hood ................. 44

• Accessory Order Form .............45-47

• DISPLAY Button ........................... 24

• Quick Review Feature................... 24

• Camera Edit Feature ..................... 25

• AutoShot™ Feature ...................... 25

• Microphone ................................... 25

• Auto Focus .................................... 25

• Macro Focus.................................. 25

• Tape-Remaining Display............... 26

• Electronic Indexing ....................... 26

• Zooming ........................................ 27

• Tape Counter ................................. 28

• Use Memory-Stop Feature ....... 28

• Recording Tips .............................. 29

• Travel Tips .................................... 29

• Titler .........................................30-32

• To Create a Title ....................... 31

• Chart of Characters ................... 31

• Record a Title on a Tape in

Trouble Checks ...........................48-50

Care and Maintenance

• Clean the Camcorder..................... 51

• Clean the Camcorder’s Lens ......... 51

• Clean the Camcorder’s

Viewfinder ................................. 51

• Proper Care and Storage ............... 52

• Things to Avoid ............................. 52

Specifications.................................... 53

Information to User ......................... 53

Customer Assistance ........................ 54

Limited Warranty .......................55-56

Index ............................................57-60

the Camcorder ..................... 32

• Record a Title While Copying

a Tape from the Camcorder

to Another VCR ................... 32

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

This section describes the steps necessary to set up your camcorder to record. Refer to

the other sections for detailed operation and feature options.

Assistance

The toll-free numbers are available to help you with any problem you may encounter.

Camcorder Exchange Warranty...............800-283-6503

Customer Service................................... 800-336-1900

Accessories............................................. 800-338-0376

1. Unpack the camcorder and accessories.

• Save the packing materials and box in case you ever need to ship

or store your camcorder.

• The items shown below are packed with your camcorder. If any

are missing or appear damaged, contact your dealer immediately.

WARNING:

LEAD-ACID

BATTERY.

MUST BE

DISPOSED OF

PROPERLY.

Model CC4251

Rechargeable 10-Volt Battery

Stock No. EP096FS

Shoulder Strap

AC Adapter/Charger: Stock No. 241044

Stock No. 241305 or

DC Cable: Stock No. 241308

Stock No. 227327

Caution: Do not use this adapter/charger for any

purpose other than charging the EP096FS or EP096FL

battery pack or supplying power to the camcorder.

(continued on next page)

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

2. Attach the adapter/charger.

To AC 120V,

50/60 Hz

POWER

CHARGE

OUTPUT

Jack

Adapter/

Charger

DC Cable

DC IN 9.6V

Jack

Since the battery must be charged

before it can be used the first time,

attach the adapter/charger to the

camcorder.

2. Attach the other end of the cable

to the DC IN 9.6V jack on the

camcorder.

3. Plug the adapter/charger’s plug

into an operating outlet.

1. Attach one end of the adapter/

charger’s DC cable to the DC

OUTPUT jack on the side of the

adapter/charger.

4. Details are on page 10.

3. Adjust the handstrap, remove lens cap, and attach

it to the handstrap.

Lens Cap on

Handstrap

POWER

CHARGE

Handstrap

1. Open the handstrap, insert your

hand, and adjust the handstrap to

fit your hand.

2. Remove the lens cap and attach it

to the handstrap where shown.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

4. Insert a tape.

Safety Tab

STOP/EJECT

Button

Tape Windows

Cassette Holder

Cassette Door

Press Here to Close

• Press STOP/EJECT to open the

cassette compartment.

• Press the cassette down gently

until it locks into place, and close

the cassette compartment door.

• Insert the cassette with the safety

tab facing up and the tape windows

facing out.

• Details are on page 17.

5. Turn on the camcorder.

CAMERA/OFF/VCR Switch

• Press and hold the small button on

the CAMERA/OFF/VCR switch

while sliding it to CAMERA.

power off (OFF), or play back

tapes (VCR).

• The camcorder will automatically

turn off if it remains in record-

pause for five minutes. Place the

switch to OFF and then back to

CAMERA to turn the camcorder

back on.

The camcorder enters record-

pause.

• The position of this switch tells

the camcorder whether you want

to record (CAMERA), turn the

(continued on next page)

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

Eyepiece Focus

Control

Electronic

Viewfinder (Grasp

here to move.)

Eyepiece

BRIGHT

Control

REC/PAUSE

Button

6. Adjust the viewfinder and

eyepiece focus control.

7. Start and stop recording.

• Press and release the REC/PAUSE

button to start recording. REC

appears in the viewfinder when

the camcorder is recording.

• Grasp the viewfinder and rotate it

horizontally.

• Pull the viewfinder out from the

camcorder and rotate the eyepiece

into a comfortable viewing

position.

• Press and release the REC/PAUSE

button again to stop recording.

The camcorder is now in the

record-pause mode ( appears in

the viewfinder when the

Caution: Pulling on the eye-

piece might damage the

eyepiece or camcorder.

camcorder is in record-pause).

• Turn the eyepiece focus control to

adjust the focus of the viewfinder

for your vision.

• Adjust the brightness of the image

in the viewfinder by turning the

BRIGHT control.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

REW/

REVIEW

Button

PLAY

Button

CAMERA/

OFF/VCR

Switch

STOP/

EJECT

Button

REC/PAUSE

Button

8. Play back what you have

recorded.

9. Set the CAMERA/OFF/VCR

switch to OFF to turn off the

camcorder.

• Press the REC/PAUSE button to

pause recording.

10. Replace the lens cap.

• Press and hold the small button

while you set the CAMERA/OFF/

VCR switch to VCR.

• Press REW/REVIEW to rewind

the tape.

• Press PLAY to play back the tape.

• Press STOP/EJECT when you are

finished playing back the tape.

• Details on viewfinder playback

are on page 33.

(continued on next page)

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

11. Review camcorder’s operating controls.

DISPLAY Button

REW (Rewind)/REVIEW Button

(Also – Button)

RESET Button

DATE/TIME Button

PLAY Button

F.FWD (Fast Forward)

Button

(Also + Button)

TITLER Button

STOP/EJECT

CAMERA/

Button

OFF/VCR

(Also EDIT-ADV

Button)

Switch

Microphone

BRIGHT

Control

Reset Switch

(See Trouble

Checks for

details.)

Lens

Lens Hood

VIDEO, AUDIO and RF DC

OUT Jacks (Located Behind

Small Cover)

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

11. Review camcorder’s operating controls. (continued)

Viewfinder

Eyepiece

Focus

Control

Eyepiece

Shoulder Strap

Attachment Ring

BATTERY

EJECT

Button

Attach

Rechargeable

Battery Here

REC/PAUSE

Button

Handstrap

with Lens

Cap Holder

W and T Power

Zoom Buttons

(Also TRACKING

Buttons)

Cassette Door

(Press here to

close.)

DC IN 9.6V Jack

Shoulder Strap

Attachment Ring

Attach Adapter/

Charger’s DC

Cord Here

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Your Camcorder

Use the Adapter/Charger to Power Your Camcorder

The adapter/charger attaches to the camcorder and lets you power your camcorder

directly from standard household power. The adapter/charger operates on 120 volts,

50/60 Hz, and can be used to power the camcorder or recharge the battery.

Caution: Do not attempt to use a “power converter” to use your AC adapter/

charger on a power source other than 120 volts, 50/60 Hz, or the adapter/charger

and camcorder may be damaged. If you wish to operate the AC adapter/charger

on a power source other than 120 volts, 50/60 Hz, use only a transformer-type

power converter. Do not use “solid-state” or “switching-type” power

converters. They will damage your AC adapter/charger. An optional

CPS014, shown on page 42, is designed for use on 100-240 volts, 50/60 Hz.

To AC 120V,

DC IN 9.6V

50/60 Hz

Jack

POWER

Indicator

POWER

CHARGE

OUTPUT

Jack

Adapter/

Charger

DC Cable

Caution: Do not use this adapter/charger for any other purpose other than charging the

EP096FS or EP096FL battery pack or supplying power to the camcorder.

Attach Adapter/Charger

adapter/charger’s cable from the DC OUTPUT

jack to charge the battery.

1. Attach one end of the adapter/

charger’s DC cable to the DC

When using the adapter/charger to power the

camcorder, the battery level indicator may

OUTPUT jack on the adapter/charger.

2. Attach the other end of the cable to

display

. This indicator is used for

the DC IN 9.6V jack on the camcorder.

battery operation and has no meaning when

using the adapter/charger to power the

camcorder.

3. Plug the adapter/charger’s plug into an

operating outlet. The POWER

indicator on the adapter/charger lights

when it is properly connected.

Notes: The adapter/charger cannot charge the

battery and operate the camcorder at the same

time. If you connect both, the adapter/charger

will power the camcorder. Remove the

Remove Adapter/Charger

1. Unplug the adapter/charger from the

wall outlet.

2. Remove the DC cable from the

adapter/charger and camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Your Camcorder

Use the Battery to Power Your Camcorder

Charge the Battery

The battery must be charged before it can be used the first time. Initial charging will

take approximately two hours. The camcorder’s operating time depends on how often

you turn the power on and off and how much you use zoom and pause. Conserve

battery power by turning the camcorder off during recording breaks.

To AC 120V,

Rechargeable Battery

50/60 Hz

(Hold battery flush and

slide down.)

WARNING;

LEAD ACID

BATTERY.

MUST BE

DISPOSED OF

PROPERLY.

Align

Arrows

Adapter/

Charger

CHARGE

Indicator

Caution: When a battery is attached to the adapter/charger, do

not turn them upside down. The battery may fall off and be

damaged or cause injury.

Charge the Battery

If the DC cable is attached to the

DC OUTPUT jack on the adapter/charger,

remove it.

4. If the battery is properly connected,

the adapter/charger’s CHARGE

indicator lights.

1. Align reference mark on battery with

mark on adapter/charger.

Note: Your battery will provide better

service if you charge it before and after use

and store it at room temperature.

2. Hold the battery flush against the

adapter/charger and slide it in the

direction of the arrow.

5. Remove the charged battery by sliding

it up and off the adapter/charger.

6. Attach the charged battery to the

3. Plug adapter/charger into nearest AC

outlet (120V, 50/60Hz).

camcorder as shown on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Your Camcorder

Use the Battery to Power Your Camcorder (continued)

CAMERA/

OFF/VCR

Switch

BATTERY

EJECT

Button

Rechargeable

Battery

Hold Battery

Flush and

Slide Down

Attach the Charged Battery

If the DC cable is attached to the

camcorder, remove it before attaching

the battery.

3. Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to CAMERA.

1. Align the reference arrow on the

battery to the arrow on the back of

the camcorder.

Remove the Battery

1. Set the CAMERA/OFF/VCR switch to

OFF.

2. Hold the battery flush against the

camcorder while sliding it down in

the direction of the arrow.

2. Press and hold the BATTERY EJECT

button and remove the battery.

ATTENTION: LEAD ACID BATTERY MUST BE DISPOSED OF

PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED

USES A RECHARGEABLE BATTERY. AT THE END OF ITS

USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT

MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE

MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL

SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR

RECYCLING OPTIONS OR PROPER DISPOSAL.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Your Camcorder

Use the Battery to Power Your Camcorder (continued)

Battery Level Indicator

The battery level indicator appears in the viewfinder and shows you the amount of

power in the rechargeable battery.

Battery Level Indicator Display

in Viewfinder

Note: If the battery level display does not

appear, press DISPLAY.

Notes: When recording using the recharge-

able battery, the battery level indicator

flashes to warn you of low battery power

even if you do not have the battery level

indicator displayed.

• When

appears, the battery is

fully charged.

• As the power is used

appear.

and

The battery level indicator will not be

recorded on the tape when it appears in the

viewfinder.

• When the battery power is almost

gone, flashes in the viewfinder.

The battery level indicator has no meaning

when you use the adapter/charger or optional

car cord to power the camcorder.

Recharge the battery or use the adapter/

charger before continuing to use the

camcorder. Set the CAMERA/OFF/

VCR switch to OFF to turn off the

camcorder before replacing the battery.

Cautions: When a battery reaches empty during use, the camcorder turns off.

The battery should still have enough reserve power to eject the cassette when

you press STOP/EJECT.

If the camcorder does not eject the cassette when you press STOP/EJECT, do

not force the cassette door open. This will damage your camcorder.

Before attempting to eject the cassette, power the camcorder with the adapter/

charger or recharge the battery.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Your Camcorder

Use the Battery to Power Your Camcorder (continued)

Battery Care

• Your battery will provide better service

and longer performance if you charge

if before and after use, and store it at

normal room temperature.

damaged if operated at temperatures

above 122˚F (50˚C). Operation

time will decrease at extremely

low temperatures.

• The battery should be charged at a

temperature of 32˚F-95˚F (0˚C-35˚C)

to prevent damage.

• After repeated chargings and use the

operation time will decrease. When

the operation time becomes too short to

be useful, it is time to replace the

battery.

• Do not operate the battery at tempera-

tures below 14˚F (-10˚C) or above

95˚F (35˚C). The battery might be

Battery Storage

• Store the battery at normal room

temperature.

• A battery stored for a long period

might not supply power for the

specified time. Additional rechargings

might help restore the battery’s

operation time.

• Lead acid batteries discharge if not

used. Recharge the battery at least

once ever six months or you may not

be able to recharge it.

Battery Safety Precautions

• Batteries being recharged that have not

been used for an extended period may

continue to charge after the normal

time. Do not charge a battery for more

than 24 hours.

• Do not short the battery’s terminals.

• Allow the battery to cool down before

attaching it to the adapter/charger. The

CHARGE indicator will not light and

the battery will not charge if you attach

a hot battery.

• If the CHARGE indicator on the

adapter/charger starts flashing, remove

the battery, and reattach it. If after

several attempts, the indicator contin-

ues to flash, your battery cannot take a

charge and must be replaced.

• Do not attempt to disassemble or

modify the battery. There are no user-

serviceable parts inside.

• Use the battery only with specified AC

adapter/chargers and camcorders.

• Throwing the battery into a fire or

exposing the battery to excessive heat –

over 149˚F (65˚C) could be hazardous.

• If leakage from a damaged battery

contacts your skin or clothing, wash it

off immediately with running water.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Your Camcorder

Use the RCA Optional Car Cord Adapter

The optional DCC096 car cord shown on

page 41 allows you to power your

camcorder from the cigarette lighter

socket of a car, truck, or RV. It converts

12-volts to a 9.6-volt output.

Note: Consult the installation and operating

instructions enclosed with the DCC096 for

complete operating instructions.

Caution: The DCC096 car cord is

designed to be used only with

vehicles having 12-volt negative

ground electrical systems.

Warning: To avoid possible damage

to the camcorder, use only the

DCC096 car cord. It has positive tip

polarity and is capable of converting

12 volts to 9.6 volts.

Use the DCC096 Car Cord Adapter

Cigarette

Lighter

Socket

Optional

Car Cord

(DCC096)

DC IN 9.6V

Jack

1. Set the CAMERA/OFF/VCR switch to

6. Press and hold the small button on the

CAMERA/OFF/VCR switch while you

set it to CAMERA to turn on the

camcorder.

OFF to turn off the camcorder.

2. If the battery or DC cable is attached

to the camcorder, remove it.

3. Insert the small plug on the car cord to

the DC IN 9.6V jack located on the

back of the camcorder.

Notes: The vehicle does not have to be turned

on for the camcorder to operate from the DC

car cord.

4. Take the vehicle’s cigarette lighter out

of the socket.

When using the car cord to power the

camcorder, the battery level indicator has no

meaning.

5. Insert the car cord’s cigarette lighter

plug into the vehicle’s cigarette lighter

socket.

Download from Www.Somanuals.com. All Manuals Search And Download.

Videocassettes

Make sure you select good quality tapes for your camcorder. Use of poor quality tapes

or tapes that have been damaged or mishandled can contaminate the video heads,

resulting in a snowy picture or no picture at all during playback. Because there is no

control over the type of tape purchased or rented by consumers, head cleaning is not

covered under warranty. It is considered normal maintenance.

If a snowy picture or no-picture condition persists, consider the use of a dry chemical

nonabrasive head-cleaning tape. Be sure to follow the directions with the head-

cleaning kit carefully. Improper use of a head cleaner might damage your camcorder.

Erase Protection – Safety Tab

You can use your videocassettes over and over again. To erase a previous recording,

record over it.

Safety Tab

To record on the tape again,

cover the hole with vinyl tape.

To prevent accidental

erasure, break off the tab.

Recording and Playback Speed and Times

The camcorder records and plays back in VHS standard speed (SP). Listed below are

the maximum recording times for popular VHS cassettes.

CASSETTE RECORDING TIME

T-60

T-120

T-160

T-180

60 Min.

2 Hrs.

2 Hrs., 40 Min.

3 Hrs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Videocassettes

Insert and Remove Cassettes

Caution: Insert

the cassette only

one way with the

tape wheel facing

up and the tape

windows facing

out. The cassette

should slide easily

into the holder.

Safety Tab

Tape

STOP/

EJECT

Button

Windows

Gently push the

cassette down until

it locks into place.

Press here

to close.

1. Attach a power source to the

camcorder.

out. Gently push the cassette down

until it locks into place.

2. Press the STOP/EJECT button.

The cassette holder opens

automatically.

4. Gently close the cassette holder with

your hand.

3. Insert the cassette with the tape wheel

facing up and tape windows facing

Cassette Care and Storage

• When you are finished with a cassette,

rewind it, remove it from the

camcorder, and label it.

• Keep dust from entering the cassette

compartment. All dust is abrasive

and causes excessive wear on the

tape and the camcorder’s recording

or playback heads.

• Store cassettes vertically in their

protective cases at normal room

temperatures. Do not leave your

camcorder or cassettes in a car or

outdoors for an extended period.

Excessive heat or cold might damage

your cassettes.

• Do not use cassettes with damaged or

spliced tape.

• Do not use a cassette if it has been

damaged or exposed to moisture. The

tape may jam and/or damage your

camcorder.

• Keep the cassette away from strong

magnetic fields such as electric motors

and other devices.

• Break off the safety tab to prevent

accidental erasure of your recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Date and Time Display

Set the Time and Date

You must set the correct date and time before it can be displayed and recorded on your

tapes. The built-in clock cell must be charged as described on the next page.

REW/

CAMERA/

OFF/VCR

Switch

F.FWD Button

REVIEW

DATE/TIME

Button

STOP/EJECT

Button

1. Attach a power supply to the

camcorder.

5. When the correct month is displayed,

press STOP/EJECT. The cursor

moves to the next part of the display.

2. Press and hold the small button on the

CAMERA/OFF/VCR switch while you 6. Repeat steps 4 and 5 to set the correct

set it to CAMERA.

month, day, year, hour, minute(s), and

AM/PM.

3. Press the DATE/TIME button to

display the date and time in the

viewfinder.

7. After setting AM or PM, press the

DATE/TIME button to remove the

flashing cursor and start the internal

clock.

A flashing cursor lets you know which

part of the display you are setting.

If the flashing cursor does not appear,

press and hold DATE/TIME and then

press STOP/EJECT.

To Correct the Date or Time

To correct the date or time, press and hold

the DATE/TIME button and then press

STOP/EJECT. The display appears along

with the flashing cursor. Use STOP/

EJECT, F.FWD, and REW/REVIEW to

correct the time or date. Press DATE/

TIME to remove the flashing cursor and

start the clock.

12:00AM

1/ 1/1998

4. Repeatedly press the F.FWD or REW/

REVIEW until the correct month

appears. Press and hold the button to

advance the digits faster.

Download from Www.Somanuals.com. All Manuals Search And Download.

Date and Time Display

Record the Time and Date, AUTO Date, Auto TITLE, or Date

The time and date, AUTO date, auto TITLE, date only, or no date can be recorded on

your tape. Whenever one of these displays appear, it is recorded.

Viewfinder Displays

Repeatedly Press DATE/TIME

10:25AM

AUTO

11/18/1998

AUTO Date Display

Date and Time Display

TITLE

11/18/1998

No Display

AUTO Title Display

11/18/1998

Date Display

To Select the Display to Record

1. Repeatedly press DATE/TIME to

•

TITLE: The date and title you

have created are displayed and

recorded.

select the display you want to record.

• Date and Time Display: The

date and time are displayed

and recorded.

• Date Display: The date is

displayed and recorded.

•

AUTO Date: The date is

automatically recorded for

approximately ten seconds at the

beginning of the recording.

• No Display: No display is

displayed or recorded.

Charge the Built-in Clock Battery

The camcorder has a built-in rechargeable battery that must be charged

approximately every two months.

Cautions: If this battery is not charged every two

months, it will over-discharge and shorten its

useful life.

1. Attach a power supply and set the

CAMERA/OFF/VCR switch to OFF.

Do not attempt to replace this battery. Take the

camcorder to an authorized RCA Service Center.

2. Leave the power supply attached at

least 24 hours.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Use the Viewfinder

The camcorder’s viewfinder is a miniature monitor that displays the picture seen by the

camcorder when recording.

Adjust Viewfinder for Convenient Viewing

For convenient viewing, rotate the viewfinder horizontally, pull it out from the

camcorder, and adjust the eyepiece.

Eyepiece Focus

Control

Viewfinder

Eyepiece

Pull Here

Viewfinder in Operating Position

Viewfinder in Carrying or Storing Position

Cautions: Do not pull on the eyepiece. Do not force the eyepiece to rotate

completely around. This might damage the viewfinder and/or the camcorder.

When carrying the camcorder with the shoulder strap, put the viewfinder back

in its original position. This helps prevent possible damage to the viewfinder

from bumping against your body as you move.

Eyepiece Focus Control

The eyepiece focus control lets you set the

focus of the viewfinder for your vision. If

you wear eyeglasses, you probably can

operate the camcorder without them.

viewfinder and adjust the eyepiece focus

control for your vision.

The eyepiece focus control does not affect

the focus of the picture actually recorded

by the camcorder.

It is easiest to set the correct focus by

focusing on one of the viewfinder’s on-

screen displays. Look through the

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Use the Viewfinder (continued)

Tilt Adjustment

Cautions: Do not pull on the

eyepiece. Do not force the eyepiece

to rotate completely around. This

might damage the viewfinder and/or

the camcorder.

BRIGHT Control

The brightness of the viewfinder can be

adjusted by rotating the BRIGHT control.

This does not affect the picture being

recorded by the camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Viewfinder Displays

AE:60

0000M

INDEX

ZOOM

NO TAPE

10:30AM

11/18/1998

REC

AE:60 (Auto Exposure) Shutter Speed

Status Displays

Press the DISPLAY button to display the

shutter speed selected by the camcorder.

The following displays appear to tell you

the status of the camcorder.

•

The REC indicator appears during

recording.

Battery Level Indicator (

)

Press the DISPLAY button to display the

amount of time left on the rechargeable

battery. Details are on page 13.

The

camcorder is fast-forwarding.

The indicator appears when the

indicator appears when the

INDEX Indicator

camcorder is rewinding.

Press the DISPLAY button to display this

indicator when the camcorder is placing

an index mark on the tape. Details are on

page 26.

•

The indicator appears during

record-pause.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Viewfinder Displays (continued)

Tape Counter (0000M) with Memory

Tape-Remaining Indicator (

)

Stop

Press the DISPLAY button to display the

tape-remaining indicator. This display

shows the approximate amount of tape

left for recording or playback. Details

are on page 26.

Press the DISPLAY button to display the

tape counter. The tape counter helps

locate segments of tape.

•

Whenever the tape counter is

displayed, the memory-stop feature

turns on.

Zoom ( ) and ZOOM Indicators

•

Details are on page 28.

•

The zoom indicator ( ) appears

when you use the power zoom

buttons (T and W).

Tape Warnings (TAPE, NO TAPE, and

TAPE END)

•

TAPE flashes when you try to record

with the safety tab removed.

•

ZOOM appears when you zoom more

than 16 times.

•

TAPE flashes when a damaged tape is

inserted. Remove the tape and replace

it with a new one.

Details are on pages 27.

•

NO TAPE flashes when you try to

record with no cassette inserted.

TAPE END flashes when there is

approximately five minutes recording

time left on the tape.

•

TAPE END briefly appears when you

reach the end of the cassette during

recording.

Time and Date Display

Press the DATE/TIME button to display

the time and date, AUTO date, auto

TITLE, date only, or no date when the

camcorder is in record-pause.

•

These displays are recorded on the

tape when they appear in the

viewfinder.

•

Details are on pages 18-19.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

DISPLAY Button

REW/REVIEW Button

Microphone

CAMERA/OFF/

VCR Switch

Zoom Buttons

(T and W)

Quick Review Feature

DISPLAY Button

Press and release REW/REVIEW when the

camcorder is in record-pause to review

the last few seconds of a recording. The

CAMERA/OFF/VCR switch must be set

to CAMERA.

The DISPLAY button lets you remove the

battery level, tape counter with memory

stop, tape speed, remaining-tape, index,

shutter speed, and zoom indicators from

the viewfinder.

The camcorder plays back the last few

seconds of the recording, returns the tape

to its previous position, and returns to

record-pause.

• Press DISPLAY to remove the

indicators.

• Press DISPLAY again to display the

indicators.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Camera Edit Feature

Auto Focus

The camera edit feature allows you to

The camcorder focuses on the subject in

position the tape when the camcorder is in the center of the viewfinder. Auto focus

record-pause. Press and hold the small

button while you set the CAMERA/OFF/

VCR switch to CAMERA.

operates on the telephoto (T) side from

approximately 2-1/2 feet to infinity. It

operates on the wide-angle (W) side from

3/8 inch from the lens surface (macro-

focus) to infinity.

Note: When the displays appear, the AE

indicator for the shutter speed selected by the

camcorder (1/60, 1/100, 1/120, 1/180, 1/250,

1/350, 1/500, 1/750, 1/1000, 1/1500, 1/2000,

or 1/4000) appears in the viewfinder.

• Press and hold REW/REVIEW to

visually search the recorded tape

in reverse.

• Press and hold F.FWD to visually

search forward on the recorded tape.

• Press and hold PLAY to view the

recorded tape at normal speed.

The following conditions may prevent

auto focus from operating properly.

When you release the button, the

camcorder returns to record-pause at that

point on the tape.

• Recording a subject through a window.

• Recording a subject having a close

foreground and a far background.

Auto Shot™ Feature

• Recording two subjects at different

distances that overlap.

The camcorder automatically adjusts

shutter speed, light, focus, white balance,

and iris according to the recording

conditions.

• Subject not in center of scene.

• Recording in low-light situations.

• Recording a scene with fast motions,

like a tennis swing.

Microphone

Macro Focus

The microphone picks up the sound

during a recording. It is more sensitive to

sounds coming from the direction the lens

is pointed.

The macro-focus feature lets you focus on

objects as close as 3/8 inch from the

camcorder lens.

1. Press and hold zoom button W until

the lens is completely zoomed out.

2. Position the subject in the center of

the scene.

Notes: Zooming is not possible when using

macro-focus. To change the size of the

subject, move the camcorder lens closer or

farther away from it.

For best results increase illumination when

recording with macro-focus.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Tape-Remaining Display

Electronic Indexing

The tape-remaining display shows the

amount of recording or playback time left

on the tape in the camcorder.

Each time you begin recording (after the

camcorder has been turned off for at least

four hours), the camcorder automatically

records an index mark at the beginning of

the new recording.

When you play back the indexed tape in a

VCR that has a compatible indexing

feature called “VHS Index Search

System”, the invisible marks are located

automatically. See your VCR Owner’s

Manual for index playback instructions.

Tape-Remaining Display

in Viewfinder

•

Press DISPLAY to display the tape-

remaining indicator in the viewfinder.

INDEX

The camcorder takes approximately

ten seconds when you first start

playing or recording a tape to

calculate the tape remaining.

INDEX Display

in Viewfinder

“_ _ _ _ _ _” appears while the

camcorder calculates the amount of

tape remaining.

When the DISPLAY button is pressed so

the displays appear, INDEX appears

briefly to let you know the camcorder is

recording an index mark.

Note: The camcorder does not record index

marks every time you stop and start recording.

An index mark is recorded only once – at the

start of each day’s recording session

(or whenever the camcorder has been turned

off for four hours).

Once the amount of tape remaining is

calculated, it updates and is readily

available as long as the same tape

remains in the camcorder.

• When

appears, all or most of

the tape remains.

• As the tape is used,

appear.

and

• When the tape is almost at its end,

TAPE END flashes in the viewfinder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Zooming

You can zoom in and out for close ups or wide-angle shots by pressing one of the zoom

buttons on the camcorder.

Zoom Buttons

(T and W)

Use the Zoom Buttons (T and W)

1. To zoom in or out from wide angle to

32 times, press zoom button T or W.

• To move the lens in the telephoto

ZOOM

(close-up) direction, press T .

• To move the lens in the wide angle

direction, press W.

When you press DISPLAY so the displays

appear, the zoom level indicator appears

in the viewfinder during normal zooming.

Zoom Indicators

in Viewfinder

When you zoom in more than 16 times,

ZOOM appears in the viewfinder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Tape Counter

The tape counter acts as a handy reference to help you locate tape segments.

The memory-stop feature helps locate a certain point on the tape. When the

tape counter appears, memory stop is automatically turned on.

REW/

CAMERA/

OFF/VCR

Switch

DISPLAY

Button

F.FWD Button

REVIEW

RESET

Button

STOP/EJECT

Button

Use the Memory-Stop Feature

1. Place the camcorder in record-pause.

Make sure the displays appear in the

viewfinder. If they do not, press

DISPLAY.

you marked, press the REC/PAUSE

button to stop recording or the STOP/

EJECT button to stop playback.

4. Press and hold the small button while

you set the CAMERA/OFF/VCR

switch to VCR.

2. Locate the place on the tape you want

to return to, and press RESET to reset

the counter to 0000M.

5. Press the REW/REVIEW button. The

tape rewinds to the counter reading of

0000M.

0000M

Notes: Press DISPLAY to display the tape

counter. Whenever the tape counter is

displayed, memory stop is turned on.

Whenever memory stop is turned on, the

camcorder stops rewinding or fast forwarding

when the counter reaches 0000M. To continue

rewinding or fast forwarding, press the button

again.

Tape Counter With

Memory Stop

The tape counter automatically resets to

0000M whenever a cassette is inserted.

3. Continue to record or play the tape.

When you want to return to the place

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Recording Tips

• Try to make sure indoor scenes are

well-lit. This improves picture quality

and color reproduction.

• Be aware of video and audio back-

grounds. Background details barely

noticed while you are taping might

show up as visual “clutter” on your

recording. Background noises

(especially TV sets, radios, household

appliances, traffic sounds, etc.) might

detract from the sound you want to

record.

• Do not move the camcorder rapidly

from side-to-side while recording.

A steady, gradual “pan” avoids

blurring and “jitter”.

• Use the viewfinder to make sure the

camcorder is level while recording so

that your scene isn’t “tilted”.

• Avoid long “still” shots of landmarks

and scenic attractions. Recordings are

more interesting if they include people

and details. “Local color” will give

travel videos lasting appeal. Consider

recording a familiar or landmark scene

from an unfamiliar vantage point.

• Do not bump or tap the camcorder’s

microphone while recording because

this sound is recorded.

• Include close-ups of individuals

when taping family outings or

group functions.

Travel Tips

• Write down your camcorder’s serial

number and keep it separate from the

camcorder when traveling. If your

camcorder is lost or stolen, you will be

able to identify it.

• Make sure you have any adapters that

you may need before taking your

camcorder to other countries. Consult

your dealer for advice.

• Carry your camcorder in a carrying

case when traveling. See page 41 for a

case designed especially for this

camcorder. An ordinary suitcase or

carry bag does not offer the protection

your camcorder needs. Treat your

camcorder as carry-on luggage to

protect it from rough handling.

• Use extra care to avoid damage to your

camcorder and accessories when

operating them at a beach or pool.

Spray, sand, and dust should be

avoided. If your lens has been exposed

to the elements, clean it only with

proper lens cleaning supplies.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Titler

The camcorder’s built-in titler stores a title in memory. You can display and record the

created title at any time.

The built-in character register contains over 45 different characters for creating your

titles. The title can contain up to 32 characters on two lines.

– Button

(Also REW/REVIEW Button)

+ Button

(Also F.FWD Button)

TITLER

Button

EDIT-ADV Button

(Also STOP/

CAMERA/OFF/

VCR Switch

EJECT Button)

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Titler (continued)

To Create a Title

1. Attach a power source to the

camcorder. Press and hold the small

button on the CAMERA/OFF/VCR

switch while you set it to CAMERA.

See the chart below for the characters

available.

5. After you have selected the first

character, press EDIT-ADV to move

the flashing cursor where you want

the next character to appear.

2. Press TITLER to display the titler

graphics in the viewfinder. A flashing

cursor appears.

6. Repeat steps 4 and 5 until you have

completed the title.

3. Press EDIT-ADV to move the flashing

cursor to the place you want to begin

your title.

7. When you are finished, press TITLER

to store the title and remove the title

graphics from the viewfinder.

4. Select the first character for your title

by pressing the + or – button until the

character you want appears in the

viewfinder.

Remember: Remove the titler graphics

from the viewfinder for normal recording.

To Correct an Error

1. Press TITLER to display the titler

3. Press the + or – button until the

correct character appears.

graphics in the viewfinder.

2. Press EDIT-ADV to move the flashing

cursor over the character you want to

correct.

Note: If you want to delete a character,

press + or – until the blank space appears.

Chart of Characters in Titler’s Register

A B C D E F G H I J K L M

N O P Q R S T U V W X Y Z

0 1 2 3 4 5 6 7 8 9 ? ‘ . / ,

– ; : < > ! (BLANK)

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Titler (continued)

Record a Title on a Tape in the Camcorder

1. Attach a power source to the

camcorder. Press and hold the small

button on the CAMERA/OFF/VCR

TITLER to remove the titler graphics

from the viewfinder. The camcorder

now records normally. If you do not

want to continue recording, press

REC/PAUSE.

switch while you slide it to CAMERA.

2. Locate the place on the tape where

you want to record the title.

Remember: Remove the titler

graphics from the viewfinder for

normal recording.

Note: If you record a title on a

prerecorded tape, the audio and video is

erased where the title is inserted. There

will also be a three-to-four second pause

of blank tape before the existing audio

and video return.

Note: You can use the AUTO title feature

to automatically record the title and date

for ten seconds when you begin recording.

Press the DATE/TIME button to display

TITLE before starting to record.

3. Press TITLER to display the titler

graphics in the viewfinder.

4. Press REC/PAUSE to start recording

the title.

5. After you have recorded the title for

the desired length of time, press

Record a Title While Copying a Tape from the Camcorder to Another VCR

1. Attach a power source to the

camcorder.

6. After you have recorded the title for

the desired time, press TITLER to

stop recording the title.

2. Place the tape you want to copy in the

camcorder and place the CAMERA/

OFF/VCR switch in VCR.

7. Stop the camcorder and VCR when

you finish copying the tape.

Important Note: Remove the titler graphics

from the viewfinder for normal recording.

3. Place a blank tape in the VCR, and

place the VCR in record-pause.

4. Start copying the tape from the

camcorder to the VCR. Details are

on pages 36-37.

5. When you see the place on the

tape you want to insert the title,

press TITLER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Viewfinder Playback

Viewfinder playback is the simplest way to watch tapes using the camcorder.

PLAY

Button

CAMERA/

OFF/VCR

Switch

STOP/EJECT

Button

Eyepiece

Viewfinder

BRIGHT

Control

Eyepiece Focus

Control

To Play Back a Tape

• Grasp the viewfinder and rotate it

horizontally. Pull the viewfinder

out from the camcorder and rotate

the eyepiece into a comfortable

viewing position

1. Attach a power supply.

Attach the adapter/charger, charged

battery, or optional car cord.

2. Insert a tape.

• Press STOP/EJECT to open the

Caution: Pulling on the

eyepiece might cause damage

to the eyepiece or camcorder.

cassette compartment.

• Insert the cassette with the safety

tab facing up and the tape windows

facing out. Press the cassette down

gently until it locks into place, and

close the cassette compartment

door.

• Turn the eyepiece focus control to

adjust the focus of the viewfinder

for your vision.

• Rotate the BRIGHT control to

adjust the brightness.

• The camcorder only plays back

tapes recorded in the SP speed.

5. Press PLAY to begin playback.

• If necessary, adjust tracking.

3. Press and hold the small button on

the CAMERA/OFF/VCR switch

while you slide it to VCR.

• During playback, use the playback

features on the following page.

6. Press STOP/EJECT when you are

4. Adjust the viewfinder.

finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback Features

REW /

REVIEW

Button

STOP/

EJECT

Button

CAMERA/

OFF/VCR

Switch

F.FWD

Button

REC/PAUSE

Button

Tape Positioning

Stop-Action Pause

Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to VCR.

• During playback, press REC/PAUSE to

“stop the action” and view one frame of

the tape.

• Press and quickly release REW/

REVIEW or F.FWD to rewind or

fast-forward the tape.

• Press REC/PAUSE again to return to

normal playback.

Caution: Pause is designed for

momentary interruptions and should

not be used for an extended period of

time. If the camcorder remains in

pause for more than five minutes, it

enters the stop mode and turns off to

prevent excessive tape wear.

• Press STOP/EJECT to stop

the tape.

Visual Searching

• During playback, press and hold

F.FWD or REW/REVIEW if you

want to search the tape visually in

forward or reverse.

• Release the button to return to

normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback Features (continued)

TRACKING

Buttons

(Also W and T

Buttons)

Tracking

During playback, streaks might appear in

the playback picture. Press either

TRACKING button to move the streaks

up or down and out of the picture.

Remove the tape to reset the tracking to

its preset center.

Note: The tracking buttons only affect tape

playback. They have no effect during

recording.

• During stop-action playback, pressing

one tracking button might reduce

picture “jitter” (picture bouncing up

and down). Some “jitter” is normal.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback on TV (or VCR) with Audio/Video Inputs

To connect your camcorder to a TV monitor (or VCR) with audio and video inputs, you

need an optional audio/video cable, such as VH83 shown on page 43. If your TV is

already connected to a VCR, attach the camcorder to the VCR and watch what the

camcorder is recording or playing on the TV.

Yellow

White

VIDEO

White Audio Plug

AUDIO

Jack

Yellow

Video Plug

VIDEO

Audio/Video Cable

(such as VH83)

Back of

VCR or

TV Monitor

Yellow Video Plug

White

Audio Plug

–OR–

Yellow

Video Plug

White

Audio Plug

AUDIO

White Audio Plug

Y-Adapter

(such as AH25)

Audio/Video Cable

(such as VH83)

VIDEO

Back of

Stereo

VCR or

TV Monitor

Yellow Video Plug

Installation

1. Attach the white plug on one end of

the audio/video cable to the AUDIO

IN jack on the TV (or VCR).

2. Attach the yellow plug to the VIDEO

IN jack on the TV (or VCR).

3. Attach the white plug on the other

end of the audio/video cable to the

AUDIO jack (located under the small

cover) on the side of the camcorder.

Notes: If your cable does not have white

and yellow plugs, attach the same color to

the audio jacks.

If your TV (or VCR) has stereo AUDIO IN

jacks, attach the plug to the one labeled

MONO. If one is not labeled MONO you

need a Y-adapter, such as AH25, shown on

page 43 to hear both channels.

4. Attach the yellow plug to the yellow

VIDEO jack on the camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback Operation and How to Copy Tapes on the VCR

1. A. Camcorder connected directly to

TV: Turn on the TV and tune it to

the video input channel.

3. Press PLAY.

• During playback, use the playback

features on pages 34-35.

B. Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the “line”

or “camera mode”. (If your VCR

does not have a “line” or “camera

mode”, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

4. To copy what the camcorder is

playing, place a blank cassette in

the VCR, and press the VCR’s

RECORD button.

Note: Make sure the memory-stop feature

is turned off (press DISPLAY) or the

camcorder will enter play-pause when the

counter reaches 0000M.

coming from the VCR.

5. Press STOP/EJECT when you are

finished.

2. Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to VCR.

Note: The camcorder only plays back

tapes recorded in the SP speed.

Viewing What the Camcorder is Seeing (or Recording)

1. A. Camcorder connected directly to

TV: Turn on the TV, and tune it to

the video input channel.

2. Press and hold the small button on the

CAMERA/OFF/VCR switch while

you slide it to CAMERA.

Note: Turn the TV’s volume down to

prevent a high-pitched squeal caused

by feedback.

B. Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the “line”

or “camera mode”. (If your VCR

does not have a “line” or “camera

mode”, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

3. Press the REC/PAUSE button to begin

recording. You can watch what the

camcorder is seeing (or recording) on

the TV screen.

coming from the VCR.

Caution: The unauthorized recording of copyrighted

material may infringe the rights of others.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback on a TV Without Audio/Video Inputs

To connect your camcorder to a TV without audio/video inputs, you need an

optional CRF95 RF output adapter and an optional coaxial RF cable, such as VH82

or VH90 shown on page 43. If your TV has audio and video inputs (or is

connected to a VCR), refer to pages 36-37.

Antenna

Optional 300/75 ohm

Transformer

Back of TV

VHF

Channel Selector

FROM

ANT

VHF

Optional RF Output Adapter

(such as CRF95)

Optional 75-300 Ohm

Transformer

(such as VH54

Optional Coaxial RF Cable

(such as VH82 or VH90)

OUT

TO TV

Installation

Note: If your TV has 300 ohm screw

terminals, you need a 75/300 ohm

transformer, such as VH54, shown on

page 43.

1. Disconnect the VHF antenna from

your TV. Connect the antenna to the

IN FROM ANT connector on the RF

output adapter if you are going to

leave the adapter connected to the TV.

3. Attach the RF output adapter’s yellow

plug to the VIDEO jack, the small

plug to the RF DC OUT jack, and the

white plug to the AUDIO jack located

under the small cover on the side of

the camcorder.

Note: If your VHF antenna is the flat

twin-lead type attached by two screws,

you need an optional 300/75 ohm

transformer.

2. Attach one end of the optional coaxial

RF cable to the OUT TO TV

connector on the adapter, and attach

the other end to the VHF input on

your TV as shown.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback Operation

4. Press PLAY on the camcorder.

1. Set the CH3/CH4 switch on the

RF output adapter to channel

CH3 or CH4.

•

During playback, use the playback

features described on pages 34-35.

2. Turn on the TV, and tune it to the

same channel you selected with the

RF output adapter’s CH3/CH4 switch.

5. Press STOP/EJECT on the camcorder

when you are finished.

3. Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to VCR.

Viewing What the Camcorder Is Recording

1. Turn on the TV and tune it to channel

3 or 4. Turn the TV’s volume down to

prevent a high-pitched squeal caused

by feedback.

3. Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to CAMERA.

4. Press the REC/PAUSE button to begin

recording. You can watch what the

camcorder is seeing (or recording)

on the TV screen.

2. Set the CH3/CH4 switch on the RF

output adapter to the same channel

you selected on the TV.

Normal TV Viewing

For normal TV viewing, leave the RF

output adapter hooked up to the TV.

Disconnect the adapter’s plug from the

camcorder or turn the camcorder’s

power off.

Note to Cable TV Installer

This reminder is provided to call your attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that

provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building as

close to the point of cable entry as practical.

Download from Www.Somanuals.com. All Manuals Search And Download.

Attach the Shoulder Strap

The camcorder’s shoulder strap is designed to let you carry the camcorder

from your shoulder and – when you are ready to shoot – bring the

camcorder to shooting position in one quick movement.

To Attach the Shoulder Strap

1. Unfasten one end of the shoulder strap 3. Thread the end of the strap back

from the buckle. Make sure you leave

the buckle on the strap.

through the buckle making sure it is

threaded over the outer strap. Make

sure the strap is not twisted.

Buckle

2. Thread one end of the shoulder strap

through one of the shoulder strap rings

as shown below.

4. Repeat steps 1-3 to attach the other

end of the strap.

5. Pull on the straps and make sure they

are securely fastened before you use

the shoulder strap to support your

camcorder.

Shoulder Strap

Attachment Ring

Cautions: Rotate the viewfinder up

to its original position when you

carry the camcorder with the

Shoulder Strap

Attachment Ring

shoulder strap. This helps prevent

possible damage to the viewfinder

or monitor from bumping against

your body as you move.

Make sure the shoulder strap is

firmly attached before using it

to carry the camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

We invite you to take a look at some great ideas for sparking creativity and adding to

the fun of using your VHS camcorder. The following pages have a selection of

accessories to help make your memorable moments look and sound even better.

These accessories are designed to make the process of recording and watching your

videos more enjoyable.

To order accessories, contact your local Dealer.

If a dealer is not nearby, all accessories are available through toll-free ordering or by

using the order form on page 45.

AC202 Soft Carrying Case

DCC096 DC Car Cord Adapter

Do not use any other car cord

with this camcorder.

This case provides protection and utility

for full size camcorders and most

accessories. It is constructed of rugged

nylon fabric for years of reliable service.

This car cord adapter enables you to

operate your camcorder from your car,

truck, or RV by plugging the car cord

directly into the vehicle’s cigarette lighter

socket. The DCC096 is designed

Three outside pockets provide ample

accessory storage with mesh-covered lens

filter compartment and built-in holders for

memo pads, pens, and other accessories.

The hand grip and adjustable shoulder

strap allow for convenient, comfortable

transportation of the camcorder.

specifically to convert power from a

12-volt battery to a 9.6-volt output.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

EP096FS and EP096FL Rechargeable

Batteries

Using the Optional AC093 Tripod

Mounting the camcorder on a tripod, such

as AC093, keeps the camcorder steady

and produce excellent video results.

This tripod’s fluid-effect head provides

smooth camera pan and tilt. The quick-

release mount makes it easy to attach or

remove the camcorder. The grooved,

tubular 3-section leg design folds down to

24" when not in use. Rubber feet allow

for sure footing and built-in retractable

leg spikes eliminate the need for

These rechargeable lead-acid batteries

are designed specifically for long life.

The EP096FS is a 1-hour battery. The

EP096FL powers your camcorder twice

as long as the EP096FS (depending on

how much you turn the camcorder on

and off and use zoom and pause). Both

can be recharged with the AC adapter/

charger that came with your camcorder.

removing the feet.

CPS014 AC Battery Charger

The CPS014 battery charger plugs

directly into an AC outlet and charges the

EP096FS and EP096FL camcorder

batteries. Because the CPS014 operates

on 100-240 Volts, 50/60 Hz, you can use

it virtually anywhere in the world.

A plug adapter might be required in

some countries.

Cautions: Before using a tripod, make sure

it is stable enough to hold the camcorder

without falling over. Do not transport the

camcorder attached to the tripod.

When attaching your camcorder to a tripod,

be careful not to force the tripod screw into

the camcorder’s tripod mounting hole.

The tripod screw should not protrude into the

camcorder more than approximately three-

eighth (3/8) inch. Forcing the screw could

damage the mounting hole on the bottom of

the camcorder.

All specifications and descriptions

of accessories are subject to change

without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

CRF95 RF Output Adapter

VH54 Cable Transformer

This 75-to-300 ohm transformer is used to

connect a standard 75-ohm antenna cable

(such as VH82 or VH90) to the 300 ohm

screw terminals on a TV.

This RF output adapter is used with a

coaxial RF cable, such as VH82 or VH90,

to connect your camcorder to a standard

TV (one without audio/video inputs) for

playback. If your antenna cable is the flat

twin-lead type attached by two screws,

you need a 300-to-75 ohm transformer.

If your TV has 300 ohm antenna screw

terminals, you need an optional 75-to-300

ohm transformer such as VH54.

VH83 Audio/Video Cable

Coaxial RF Cables

This six foot audio/video cable can be

used to connect the camcorder to a TV

monitor or VCR for tape playback or

copying tapes.

VH82 (6-ft)

VH90 (12-ft)

These RF cables are used with the RF

output adapter to connect your camcorder

to a standard TV (one without audio/video

input jacks) for playback. If your TV has

300 ohm antenna screw terminals, you

need an optional 75-to-300 ohm

AH25 Y-Adapter

transformer, such as VH54. If your

antenna cable is the flat twin-lead type

attached by two screws, you need an

optional 300-to-75 ohm transformer.

This Y-adapter allows you to connect your

camcorder’s mono audio cable to a stereo

TV or VCR.

All specifications and descriptions of accessories

are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

Remove the Lens Hood

The lens hood can be removed so you can attach optional accessories, such as wide-

angle lens, lens extenders, or lens filter kits.

To Attach an Accessory Lens

1. Attach the lens cap over the lens hood. 3. Turn the accessory lens clockwise into

the camcorder’s lens. Make sure the

lens is tightened firmly, but do not

over tighten.

2. Turn the lens cap and hood

counterclockwise with the palm of

your hand to remove them.

All specifications and descriptions of

accessories are subject to change

without notice.

Caution: Do not grasp the end of the

lens hood.

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessory Order Form

Order Form for Camcorder Model CC4251

Description

Part No.

AC093

AC202

AH25

Price

Qty.

Total

Deluxe Tripod

$ 59.95

$ 49.95

Soft Camcorder Case

Y-Adapter

2.95

AC Adapter/Charger (100-240V)

RF Output Adapter

Car Cord Adapter

CPS014

CRF95

DCC096

EP096FL

EP096FS

VH54

$219.95

$ 69.95

$ 49.95

$ 79.95

$ 69.95

Rechargeable Battery (Extended)

Rechargeable Battery (Standard)

75-300 Cable Transformer

Coaxial RF-Cable

2.95

6.95

5.95

7.95

VH82

Audio/Video Cable

Coaxial RF-Cable

VH83

VH90

Shoulder Strap

241305

241044

241308

$ 12.95

$169.95

$ 13.65

AC Adapter/Charger (Supplied)

DC Cable

Total Merchandise ........................................................................................... $_________

Sales Tax .......................................................................................................... $_________

We are required by law to collect the appropriate

sales tax for each individual state, county, and

locality to which the merchandise is being sent.

Shipping and Handling .................................................................................... $

5.00

Total Amount Enclosed ................................................................................. $_________

Use VISA, MasterCard, or Discover.

Money order or check must be in U.S.

currency only. No COD or cash.

Prices are subject to change without notice.

Please complete other side also

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessory Order Form

Charge your order on your VISA,MasterCard,

or Discover Card by filling in below

USE YOUR CREDIT CARD

IMPORTANT: Copy complete account number from your VISA card

Expiration date:

IMPORTANT: Copy complete account number from your MasterCard

Expiration date:

Copy Number above your name on MasterCard

IMPORTANT:

Copy complete account number from your Discover Card

Expiration date:

AUTHORIZED SIGNATURE

Prices are subject to change without notice.

A complete and correct order will

save you days of waiting.

Print or type your name and

address clearly.

Name:

Street:

Apt:

Zip:

City:

State:

Please make sure that both sides of this form have been filled out completely.

• Allow 4 weeks for delivery.

• All accessories are subject to availability.

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessory Order Form

To order accessories, contact your local Dealer.

If a dealer is not nearby, you can also follow the directions below to order by

telephone or direct-by-mail.

United States and Canada Orders

To place your order by phone, have your Visa, MasterCard, or Discover card ready

and call the toll-free number listed below between 8 AM and 10 PM (EST)

Monday through Friday or between 9AM and 5PM (EST) Saturday.

Use this number only to place an order for accessory items listed on

this order form.

1-800-338-0376

To place your order by mail, detach and mail the completed order form with credit

card information, money order, or check in U.S. currency (made payable to

Thomson Consumer Electronics, Inc.) to the following address:

Video Accessories

PO Box 8419

Ronks, PA 17573

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Checks

If you’re having trouble with your camcorder, you probably can correct the problem

yourself. Before you take your camcorder to an Authorized RCA Camcorder Service

Center or call a service person, use the chart below. Find the problem and try the

adjustment(s) that is listed to the right.

If service should be necessary, read your warranty to find out what is covered and how

to get service.

Trouble

Checks and Adjustments

No power

•

Press and hold the small button while you place the

CAMERA/OFF/VCR switch to CAMERA or VCR.

If using battery, it might need to be recharged.

If using AC adapter/charger, make sure it is plugged

into a working outlet.

•

Won’t record or

play back

•

If using AC adapter/charger, make sure it is plugged

into a working outlet.

Make sure CAMERA/OFF/VCR switch is set to correct

position for desired operation.

•

There might not be a cassette in the camcorder.

Try ejecting and reinserting the cassette.

The cassette tape might be broken, try another cassette.

You may have reached the end of the cassette, try

rewinding it.

•

Moisture condensation might cause the tape to stick to

the headwheel and damage the headwheel or tape. Give

the camcorder 2 or 3 hours to reach a stable temperature

before reinserting a cassette.

Won’t play back

Won’t record

•

Set CAMERA/OFF/VCR switch to VCR position.

•

Safety tab is removed. See page 16.

Set CAMERA/OFF/VCR switch to CAMERA.

No picture

•

Remove lens cap.

Camcorder turns

off

Set CAMERA/OFF/VCR switch to OFF and then

CAMERA or VCR to turn back on. If camcorder is left

in record-pause or play-pause for several minutes, it

turns off to prevent tape wear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Checks

Trouble

Checks and Adjustments

Sound is too low or

distorted

•

Subject was too far from camcorder.

Tape stops during

rewind or fast

forward or rewind

or fast forward not

operating

•

Tape-counter displayed. Whenever the tape counter

appears, the camcorder stops rewinding (or fast

forwarding) when the counter reads 0000M. Press

REW/REVIEW or F.FWD again to continue rewinding

or fast forwarding or press DISPLAY to remove the

tape counter from the viewfinder.

•

Make sure titler graphics do not appear in viewfinder.

Press TITLER button to remove.

Camcorder remains in

play-pause mode

Press REC/PAUSE to return to normal playback.

Poor auto-focus

operation

•

Lens is smudged and image appears unfocused.

Eyepiece focus control is misadjusted.

Viewfinder displays

are out of focus or

dark

•

Eyepiece focus control is misadjusted. Adjust for your

vision. See page 20.

Rotate the small BRIGHT dial on the bottom of the

viewfinder to control the brightness of the image in the

viewfinder.

Picture quality is poor

during playback

•

Tape was recorded on a different camcorder or VCR.

If the picture contains black-and-white streaks, press

one TRACKING button to correct it. See page 35.

Camcorder only has one speed (SP). If the tape was

recorded at a different speed, it cannot be played back

on this camcorder.

Date and/or time or

title were recorded

on tape

•

Displays are recorded on tape whenever they appear in

the viewfinder. Remove them from the viewfinder

when recording. See page 19.

•

When

AUTO or TITLE is selected, the display is

automatically recorded when you begin recording or

change the cassette. See page 19.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Checks

Trouble

Checks and Adjustments

Title is recorded on

tape

•

Title is recorded whenever it appears in the

viewfinder. Press the TITLER button to remove the

title from the viewfinder. See page 32.

Date and/or time are

incorrect

•

Date or time might need to be set See page 18.

Clock lithium cell battery might need recharging.

See page 19.

Bright, crystal-

shaped spots appear

in viewfinder

•

Sunlight is directly entering the lens.

•

Black spots or bright spots of light (red, green, or

blue) might appear in viewfinder. These spots are

not recorded on the tape and are not due to a defect

in the unit

Colored bright spots

appear in

viewfinder

Rechargeable

battery runs down

sooner than

•

Lead-acid batteries must be kept charged. Charge your

battery before and after every use and at least every

six months.

expected

Battery run times are measured when the camcorder is

recording continuously. To check your battery; charge it

completely, aim the camcorder at a clock, and record the

clock. When the camcorder stops recording, play the last

part of the tape and check the time on the clock. A one-

hour battery should give you about 60 minutes of

recording time. In practical use, a fully charged battery

might not record for 60 minutes because the battery uses

power when you pause the recording and uses extra power

when you zoom.

Remove the power source. After one

minute press the reset switch gently

using a nonmetallic pointed item, such

Camcorder does not

turn on and/or

function buttons will

not operate

Reset

Switch

as a toothpick, until you feel a click.

This resets the camcorder to the factory

settings and erases the date, time, and

custom settings. Wait for at least one

minute after resetting the camcorder to

attach a power supply.

Download from Www.Somanuals.com. All Manuals Search And Download.

Care and Maintenance

Clean the Camcorder

To clean the camcorder’s exterior, remove

any power source connected to the

camcorder and gently wipe it with a clean

soft cloth.

Caution: Use of strong cleaning

products, such as those containing

alcohol or benzine, might damage

the camcorder.

Clean the Camcorder’s Lens

To clean the camcorder’s lens, blow it with a blower brush, and gently wipe the lens

with cleaning tissue and commercially prepared cleaning solution designed for use

on camera lens. Improper cleaning may scratch the lens.

Caution: Do not touch the lens

with your fingers. The oil from

your skin can damage the lens.

Lens

Clean the Camcorder’s Viewfinder

You can remove the viewfinder eyepiece for cleaning.

1. Turn the eyepiece counterclockwise and

pull it out.

2. Gently use a cotton swab or blower

brush to remove the dust.

3. To reattach the eyepiece, align

the reference marks and turn the

eyepiece clockwise until it clicks

into place.

Download from Www.Somanuals.com. All Manuals Search And Download.

Care and Maintenance

Proper Care and Storage

• The camcorder might be damaged by

improper storage or handling. Do not

subject the camcorder to swinging,

shaking, or dropping.

• Keep dust and grit from entering the

camcorder’s cassette door. Dust and

grit are abrasive and cause excessive

wear to both the camcorder’s

recording/playback heads and

cassettes.

• Do not store the camcorder in

temperatures below -22˚F (-30˚C) or

above 149˚F (65˚C).

• Always place the lens cap back on the

camcorder when it is not in use.

• When the camcorder is not in use,

always remove the cassette and AC

adapter/charger or battery.

• Before handling your camcorder, make

sure your hands and face are free from

any chemical products such as suntan

lotion, as it might damage the finish.

• Retain the original carton for future

storage or shipping purposes.

Things to Avoid

• Do not attempt to disassemble your

camcorder. There are no user-

serviceable parts inside.

• Do not carry the camcorder by the

viewfinder. This might cause personal

injury or damage the camcorder.

• Avoid operating your camcorder

immediately after moving it from a

cold location to a warm location. Give

the camcorder 2 to 3 hours to reach a

stable temperature before inserting a

cassette. When the camcorder is

moved from cold to warm,

• Do not operate the camcorder near the

ocean as salt water or salt water spray

may damage the internal parts of the

camcorder.

• Do not operate the camcorder for

extended periods in temperatures

below 40˚F (4˚C) or above 95˚F

(35˚C).

condensation might cause the tape to

stick to the headwheel and damage the

headwheel or tape.

• Do not expose the camcorder or

adapter/charger to rain or moisture.

If any component becomes wet, turn

off the power and take the unit to an

Authorized RCA Camcorder

Service Center.

• Do not aim your camcorder at the sun

or other bright objects.

• Do not leave your camcorder in direct

sunlight for extended periods of time.

The resulting heat buildup might

permanently damage the camcorder’s

internal parts.

• Do not use an adapter/charger or

batteries other than the ones specified

for the camcorder. Use of the wrong

accessories might cause damage to

the camcorder.

• Do not operate the camcorder in

extremely humid environments.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Camera Section

Power requirement: 9.6VDC

Power consumption: 7.5 watts

Weight: 4.4 lbs. (2kg)

Scanning: 525 lines/60 fields/30 frames

Image Sensor: 1/4" CCD Imager

Lens: F1.4

16:1 (4-64 mm) power zoom lens

Diameter: 46 mm

Dimensions – Including Viewfinder:

4-1/4" (W) x 8-3/8" (H) x 13-1/8" (D)

108 (W) x 213 (H) x 334 (D) mm

AC Adapter/Charger

Power requirement: 120 V,

50/60 Hz.

Video Recorder Section

Format: VHS

Power consumption: 24 watts

Weight: .85 lbs. (390g)

Dimensions:

Record/playback system:

Two video record/playback heads

Video signal: EIA standard

NTSC color

6"(W) x 1.7"(H) x 2.7"(D)

152 (W) x 43 (H) x 69 (D) mm

Viewfinder

Color viewfinder

Tripod Mount

One 1/4" x 10 threaded hole

Information to User

•

Increase the separation between the

equipment and receiver.

This equipment has been tested and found to

comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

•

Consult the dealer or an experienced radio/

TV technician for help.

Alterations or modifications carried out

without appropriate authorization may

invalidate the user’s FCC right to operate the

equipment.

This Class B digital apparatus meets all

requirements of the Canadian Interference —

Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte

toutes les exigences du Réglement sur le

matériel brouilleur du Canada.

•

Reorient or relocate the receiving antenna.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customer Assistance and Service

Thomson provides a toll-free telephone

You can reach Thomson at the

following number:

number to help you with any problems you

may encounter with your camcorder. Many

can be diagnosed over the phone, and if

necessary, repair or replacement will be

arranged. Please have your camcorder model/

serial number and date of purchase ready

when you call. If your unit is out of warranty,

we will quote the cost of a repair or

800-283-6503

(Toll free inside U.S.A.)

Our toll-free Camcorder number

operates from 8 a.m. to 5 p.m., CST

Monday – Friday

for U.S. customers only

replacement unit to you.

Returning equipment to Thomson for repair or exchange

Always consult Thomson and get a Return

If we are unable to resolve your problem over

the phone, we will gladly service your unit or

exchange it for a new or, at our option,

refurbished camcorder. Refer to the limited

warranty on the next page to learn about your

specific rights and responsibilities.

Authorization number before returning

anything! Obtain a Return Authorization

(RA) number from the telephone

representative before returning your

equipment to avoid delays, accounting errors,

or even loss of your unit.

Important information to customers who ship defective equipment to

Thomson Consumer Electronics

The Thomson representative who authorized

the return of your equipment will give you an

RA number over the phone. They will also

provide you with instructions on where and

how to return your Camcorder. Write the

number in large, clear characters on the

outside of the box. To avoid confusion and

misunderstandings, shipments without an RA

number clearly visible on the outside of the

box will be returned to you at your expense.

are located on the bottom of your unit.

If your Camcorder is within the warranty

period, please provide a copy of the bill of sale

to verify purchase date. Use the original box

and packing material to protect the equipment

from damage in shipment.

For your protection, insure all shipments for

full replacement value and use a reliable

shipper. Thomson assumes no responsibility

for warranty shipments from the customer to

the factory if not shipped in the manner

prescribed by Thomson.

Include a brief note describing the problem

and any conversations about the problem you

have had with Thomson personnel.

Include your name, address and model/serial

number of your Camcorder. These numbers

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

What your warranty covers:

2. The exchange location will notify you of its

arrival.

•

Any defect in materials or workmanship.

3. Take your unit, excluding all accessories,

and your evidence of purchase date, such as

a bill of sale, to the exchange location and

you will be provided the new or refurbished

unit.

For how long after your purchase:

•

90 days for labor charges.

One year for parts.

The warranty period for rental units begins

with the first rental or 45 days from date of

shipment to the rental firm, whichever

comes first.

4. If the repairs were covered by your

warranty, you will not be billed.

If you are not located near an exchange

point:

What we will do:

1. Provide your Discover, MasterCard, or Visa

account number and expiration date to our

phone representative. This is for security

purposes. If we receive your unit,

During the initial 90 days

•

Exchange your camcorder with a new or

refurbished unit, or repair your camcorder.

The option will be ours. There will be no

cost to you.

excluding all accessories, within 14 days

from the date you were provided the RA

number, only items not covered by

warranty will be charged to your account.

IF YOUR UNIT IS NOT RECEIVED

WITHIN 14 DAYS, THE SUGGESTED

RETAIL VALUE OF THE CAMCOR-

DER WILL BE CHARGED TO YOUR

CREDIT CARD. This amount will be

credited if the unit is subsequently

After the 90 days and within one year

•

Exchange your camcorder with a new or

refurbished unit, or repair your camcorder.

The option will be ours. Parts will be

provided at no charge, but you will be

responsible for the cost of labor required

for the repair.

received.

How you get service:

2. We will send you a replacement unit next

business day delivery in the continental

U.S.A.

•

Call 1-800-283-6503 and have your unit’s

date of purchase and model/serial number

ready. The model/serial number

information is on the bottom of your

camcorder.

3. You will receive an invoice packed with the

replacement product, but will not be

charged for the unit portion of the invoice

amount if we receive your unit within 14

days from the date you were provided the

RA number. Any labor and parts charges

not covered by our warranty will be

•

A representative will troubleshoot your

problem over the phone. If the

representative determines that you should

receive a replacement unit, you will be

provided with a Return Authorization (RA)

number and the location of a nearby

exchange point if one exists. No returns

will be accepted without the RA number.

included and charged against your account.

4. Ship the unit back to us, excluding all

accessories, using the replacement unit’s

carton. Shipping instructions will be

included in the carton along with your RA

number which will allow you to easily ship

the unit back to us. Make sure you insure

your shipment in case of damage or loss.

Include with the shipment:

To receive a replacement Camcorder

before you return yours:

If you are located near an exchange point:

1. We will send a replacement unit to the

exchange point next business day delivery

in the continental U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

•

Evidence of purchase date, such as a

bill of sale, to verify your unit’s

warranty eligibility.

•

Take your unit to the Authorized RCA

Camcorder Service Center of your choice.

Show the Authorized RCA Camcorder

Service Center representative evidence of

purchase date, such as a bill of sale.

•

A brief note describing your

camcorder’s problem.

Your name, address and phone number.

•

Pick up your camcorder when repairs are

complete.

Return transportation, storage, handling, and

insurance costs are your sole responsibility.

We accept no liability in case of damage or loss.

What your warranty does not cover:

•

Adjustment of customer controls.

Damage from misuse or neglect.

To receive a replacement unit after we have

received your unit:

A unit that has been modified or

incorporated into other products or is used

for institutional or other commercial

purposes.

1. Write the RA number on the outside of

the carton used to return the unit.

Make sure you insure your shipment in

case of damage or loss.

•

Batteries for remote control and clock.

Cleaning of video/audio heads.

2. Carefully pack the unit, excluding all

accessories, using the original box and

packing material if possible.

Camcorders purchased or serviced outside

the U.S.A.

3. Include with the shipment:

•

Evidence of purchase date, such as a

bill of sale, to verify your unit’s

warranty eligibility.

•

Return transportation, storage and handling

costs of your unit, including insurance for

loss or damage.

•

A brief note describing your camcorder

problem.

Acts of God, such as but not limited to

lightning damage.

Your name, address and phone number.

Product Registration:

Return transportation, storage, handling, and

insurance costs are your responsibility. We

accept no liability in case of damage or loss.

•

Please complete and mail the Product

Registration Card packed with your

camcorder. It will make it easier to contact

you should it ever be necessary. The return

of the card is not required for warranty

coverage.

4. The representative will advise the address

to mail a cashier’s check or money order

for payment if there are any out of

warranty labor or parts charges and you

elect not to use your credit card.

How State Law relates to warranty:

5. Upon receipt of your product, a new or

refurbished unit will be shipped to you

next business day delivery in the

continental U.S.A.

•

This warranty gives you specific legal

rights and you also may have other rights

that vary from state to state.

If you purchased your camcorder outside

the United States:

To have your Camcorder repaired by an

Authorized RCA Camcorder Service

Center:

•

This warranty does not apply. Contact your

dealer for warranty information.

•

Check with your dealer or call 1-800-336-

1900 for the Authorized RCA Camcorder

Service Center nearest you.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

clean the camcorder viewfinder 51

clean the lens 51

clean the viewfinder 51

proper care and storage 52

things to avoid 52

Care and storage

camcorder 52

cassette 17

Cassette care and storage 17

Cassette compartment 5

Cassette door 9

Cassette holder 17

Cassettes

insert and remove 17

Cassettes, video 16

Cautions i

Accessories

included 3

optional 41

order form 45

Adapter/charger

accessory 3

charging battery 11

using 4, 10

AE focus indicators 22, 25

Assistance 1, 3

Assistance, customer 54

AUDIO and VIDEO jacks 8, 36, 38

Auto focus 25

Charging clock battery 19

Chart of characters in titler 31

Checks, trouble 48

Clean the camcorder lens 51

Clean the viewfinder 51

Clock battery

charging 19

Contents 1

Copy tapes 37

Customer assistance and service 54

Auto shot feature 25

Battery 3

attaching and removing 12

care 14

charging 11

level indicator 13, 22

safety precautions 14

storage 14

using 11

BATTERY EJECT button 9, 12

BRIGHT control 6, 8, 21, 33

Date and time

display 18, 23

record 19

set 18

DATE/TIME button 8, 18, 19, 23, 32

DC cable 3, 10, 11, 12, 15

DC IN 9.6V jack 9, 10, 15

Design specifications 53

DISPLAY button

Cable TV installer note 39

Camcorder

clean 51

operating controls 8

turn on 5

Camera edit feature 25

CAMERA/OFF/VCR switch

5, 8, 12, 13, 15, 18, 19, 24, 25, 28,

30, 31, 32, 33, 34, 37, 39

Car cord adapter 15

Care and maintenance

8, 13, 22, 23, 24, 26, 27, 28, 37

Displays in viewfinder 22, 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Lens 8

EDIT-ADV button 8, 30, 31

Electronic indexing 26

Lens cap 4

Lens hood 8

remove 44

Erase protection 16

Eyepiece focus control 9, 20, 33

Macro focus 25

F.FWD (fast forward) button

8, 18, 25, 28, 30, 34

Memory-stop feature 28

Microphone 8, 24

Fast-forwarding indicator 22

First time operation 3

NO TAPE indicator 23

Handstrap 9

Head cleaning 16

Operating controls 8

Optional accessories 41

Order form

Important safety information i

INDEX indicator 22, 26

Indicators

accessories 45

AE focus 22, 25

battery level 13, 22

fast-forwarding 22

INDEX 22, 26

NO TAPE 23

PLAY button 7, 8, 25, 33, 37, 39

Playback

first 7

pause 22

Playback features

REC 6, 22

stop-action pause 34

tape counter 28

record-pause 6

rewind 22

tape positioning 34

tracking 35

status 22

TAPE 23

visual searching 34

Playback on a TV without audio/video

inputs 38

Playback on TV (or VCR) with

audio/video inputs 36

Playback speed 16

tape counter 23, 28

TAPE END 23

time remaining 23, 26

ZOOM 23

zoom level 23, 27

Information to user 53

Insert and remove cassettes 17

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Powering your camcorder

using adapter/charger 10

using battery 11

using optional car cord adapter 15

Problem solving 48

Status indicators 22

STOP button 7, 28

Stop-action pause 34

STOP/EJECT button

5, 8, 13, 17, 18, 28, 30, 33, 34, 37, 39

Product registration i

Table of contents 1

Tape

Quick review feature 24

insert 5

Tape copying 37

Tape counter 23, 28

TAPE END Indicator 23, 26

TAPE indicator 23

Tape positioning 34

Tape warnings 23

Things to avoid 52

Time and date

REC indicator 6, 22

REC/PAUSE button 6, 9, 22, 32, 34,

37, 39

Record-pause indicator 6, 22

Recording speed 16

Recording tips 29

display 18, 23

Registration i

record 19

RESET button 28

set 18

Reset switch 8

Time-remaining display 23, 26

Tips

recording 29

REW(rewind)/REVIEW button

7, 8, 18, 24, 25, 28, 30, 34

Rewind indicator 22

travel 29

RF DC OUT jack 8, 38

RF output adapter, optional 38

Titler 30

chart of characters 31

correct an error 31

create a title 31

record on a tape in camcorder 19, 32

record while copying a tape 32

TITLER button 8, 30, 31, 32

Tracking 35

Safety information i

Safety precautions

battery 14

TRACKING buttons 9, 35

Travel tips 29

Safety tab 16

Searching during playback 34

Shoulder strap 3

attach 40

Tripod

optional 42

using 42

Shoulder strap attachment rings 9, 40

Solving problems 48

SP speed 16, 33

Trouble checks 48

Specifications 53

Speed

recording and playback 16

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Unpack camcorder and accessories 3

VIDEO and AUDIO jacks 8, 36, 38

Video cassettes 16

Viewfinder 9, 20, 21

adjust for viewing 20

displays 22, 23

eyepiece focus control 20

playback 33

Visual searching 34

Warnings i

Warnings, tape 23

Zoom buttons 9, 25, 27

ZOOM indicator 23, 27

Zoom level indicator 23, 27

Zooming 27

Download from Www.Somanuals.com. All Manuals Search And Download.

10330 N Meridian Street

Indianapolis, IN 46290

1998 Thomson Consumer Electronics, Inc.

Trademark(s) Registered

Marca(s) Registrada(s)

Printed in Japan

TOCOM

QR19426

Download from Www.Somanuals.com. All Manuals Search And Download.

Radica Games Handheld Game System L7274 User Guide
Radio Shack Cordless Telephone TAD 729 User Guide
Raypak Swimming Pool Heater 180A User Guide
RCA Home Theater System RTB1100 User Guide
Russound Stereo Amplifier CA64 User Guide
Samson Stereo Amplifier Servo 120 User Guide
Samsung All in One Printer GH68 06997A User Guide
Samsung Camcorder AD68 00400C User Guide
Samsung Printer 1865 User Guide
Samsung Printer ML 5050G User Guide