PETROL/ ROTARY 16/ 18 LAWNMOWER
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Asse mbly
Introduc tion
Asse m b ling the d e fle c tor g ua rd a sse m b ly to the
m owe r:
Tha nk you for b uying your ne w la wnmowe r.This
ma nua l g ive s instruc tions on the c orre c t a sse mb ly
a nd sa fe use of your mowe r. It is imp orta nt tha t you
re a d the se instruc tions c a re fully. Your m owe r m a y b e
fitte d with a Brig g s & Stra tton e ng ine , p le a se follow
the a p p rop ria te instruc tions a nd d ia g ra m s.
1. Inse rt the le ft ha nd e nd of the hing e p in in the
le ft ha nd ha nd le b ra c ke t hole Fig 1, the n loc a te
the rig ht ha nd e nd of the hing e p in in the rig ht
ha nd ha nd le b ra c ke t.
Whe n fully a sse mb le d the ma c hine we ig hs
a p p roxima te ly 32kg . If ne c e ssa ry, ob ta in a ssista nc e to
re move from p a c ka g ing .
2. Using a sc re wd rive r to p ush the p in Fig 1A so
tha t the g roove Fig 1B is visib le .
3. Fit the c lip Fig 1C to the g roove Fig 1B.
Ta ke c a re whe n p ushing the ma c hine ove r une ve n
surfa c e s. Ne ve r lift the ma c hine unle ss you fe e l it is
c omforta b ly lig ht e noug h to d o so. Ob ta in a ssista nc e
if you ha ve tig ht a re a s or ob sta c le s to ne g otia te .
4. To te nsion the d e fle c tor g ua rd sp ring s loc a te
the e nd s of the sp ring s und e r the lug s, a s shown
in Fig 1D. Whe n c orre c tly a sse m b le d the
d e fle c tor g ura rd is und e r sp ring te nsion e ve n
whe n it is in the d own p osition a ga inst the
mowe r.
Ple a se re c ord the following informa tion. It will he lp
your se rvic e a g e nt if you e ve r ne e d a ssista nc e or
sp a re p a rts. The informa tion is loc a te d on a la b e l on
the re a r of the ma c hine .
Asse m b ling the ha nd le s:
1. Asse m b le the ha nd le s Fig 2. Ensure tha t the rop e
g uid e Fig 2 is fitte d on the rig ht ha nd sid e of the
ha nd le Fig 2. DO NOT ROUTE ENGINE BRAKE
CABLE THROUGH ROPE GUIDE, USE CABLE CLIPS
FIG 2C SUPPLIED TO SECURE TO HANDLE.
Mod e l Nº
Se ria l Nº
Da te of p urc ha se
2. Atta c h rop e to the rop e g uid e by loop ing the
rop e in a a nti-c loc kwise d ire c tion Fig 3A.
Inte nde d Use
Asse m b ling Gra ssb ox:
This p rod uc t is inte nd e d for d om e stic la wn m owing .
1. Asse m b le the g ra ssb ox Fig 4.
Unpa c king
Ca re fully re m ove the ma c hine from its p a c ka g ing
a nd c he c k tha t you ha ve a ll the following ite m s:
IMPORTANT: FAILURE TO FIT THE DEFLECTOR
GUARD IS DANGEROUS.
Pre pa ra tion
1. Mowe r
2. Ha nd le top
3. Ha nd le b ottom
Eng ine Oil
IMPORTANT: THE MOWER IS NOT SUPPLIED WITH OIL IN
THE ENGINE, HOWEVER IT IS POSSIBLE THAT THERE IS A
SMALL QUANTITY IN THE ENGINE. IT IS ESSENTIAL TO
FILL WITH OIL BEFORE STARTING THE ENGINE.
4. Gra ssb ox ha lve s
5. De fle c tor g ua rd , 2 sp ring s (LH & RH) a nd
hing e p in.
6. A ha rd wa re p a c k c onta ining :
Mowe r Op e ra ting Instruc tions,
4 wing nuts, 2 b olts (sq ua re sha nk),4 b ushe s,
2 p la stic sp a c e rs, 4 loc knuts, 4 short ha nd le
b olts, rop e g uid e / b olt, 2 c a b le c lip s,
Eng ine ma nua l a nd
Che c king a nd Filling
1. With the m owe r sta nd ing on le ve l g round ,
unsc re w a nd re m ove the oil fille r p lug Fig 5A.
2. Wip e the fill p lug c le a n; re fit a nd tig hte n the fille r
c a p a nd the n re m ove it a ga in.
Ma c hine Re g istra tion Ca rd
Che c k the oil le ve l.
If a ny c om p one nts a re m issing p le a se c a ll the
Consum e r Ca re Hotline on (01449) 742130 for
a ssista nc e . We a lso ha ve a wid e ne twork of
Qua lc a st Ap p rove d Se rvic e Ag e nts who you c a n
c onta c t for se rvic e a nd a d vic e b oth within a nd
outsid e the p e riod of the g ua ra nte e .
3. Ad d a g ood -q ua lity SAE 30 API SF oil in sma ll
q ua ntitie s a t a tim e , a llowing it to se ttle .
For m od e ls fitte d with Brig g s & Stra tton,
e ng ine s:
Re p e a te d ly a d d oil a nd c he c k the le ve l until it
re a c he s the full ma rk Fig 5B. The e ng ine ma y
re q uire up to 0.6 litre s of oil. Do not ove rfill.
For ord e ring sp a re s/ re p la c e m e nts p le a se re fe r to
the p a rts d ia g ra m sup p lie d .
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Re fit a nd tig hte n the oil fille r p lug .
Sta rting a nd Stopping
Note : It is im p orta nt to use the re c om m e nd e d oil to
a void d a ma g e to your e ng ine .
Sta rting the Eng ine
1. For m owe rs with throttle c ontrols: Move the
throttle le ve r Fig 9A to
Pe trol
Note : Pe trol d e te riora te s ove r tim e . Eng ine sta rting
ma y b e d iffic ult if you use p e trol ke p t for m ore tha n
30 d a ys. Alwa ys run the fue l ta nk d ry whe n storing
ove r 30 d a ys
2. If the e ng ine is c old , p re ss the p rim e r Fig 8A
thre e tim e s (five tim e s in c old we a the r). If the
e ng ine is wa rm d o not p rim e .
3. Hold the b a le b a r Fig 9B a g a inst the ha nd le .
1. Re m ove the p e trol fille r c a p Fig 5C a nd a d d
unle a d e d p e trol to the ta nk, le a ving a p p roxi-
ma te ly 6m m of ta nk sp a c e for fue l e xp a nsion.
4. Pull the sta rte r Fig 9C c ord b riskly one or m ore
tim e s until the e ng ine sta rts. Allow the c ord to
re turn slowly a fte r e a c h p ull.
2. Re p la c e the p e trol fille r c a p .
3. Wip e up a ny sp ilt p e trol from the e ng ine b e fore
sta rting the m owe r.
Stopping the Eng ine
1. Re le a se the b a le b a r Fig 9B. The e ng ine will
stop within 3 se c ond s.
Using your Mowe r
To drive the Re a r Rolle r (Se lf-prope lle d
m ode ls only)
1. Sta rt the m owe r (se e a b ove ).
Gra ssbox Fitting
Gra ssb ox
2. Sq ue e ze the la nd d rive b a le b a r Fig 9D towa rd s
the top ha nd le . For m owe rs with throttle
For non g ra ss c olle c tion the m owe r c a n b e use d
without the g ra ssb ox in p osition, with the d e fle c tor
g ua rd in the d own p osition.
c ontrol, a d just the sp e e d a s re q uire d by m oving
the throttle c ontrol Fig 9A b e twe e n
a nd
Fitting the g ra ssb ox
Lift the d e fle c tor g ua rd a nd hold up Fig 6A
Fit the g ra ssb ox Fig 6B.
4. To stop the d rive , re le a se the la nd d rive b a le b a r
Fig 9D.
Re m oving/ Em p tying
Lift the d e fle c tor g ua rd a nd hold up - re m ove
gra ssb ox.
Afte r Mowing/ Stora ge
Cle a n the e xte rior of the ma c hine thoroug hly using
a soft b rush a nd c loth. Do not use wa te r, solve nts or
p olishe s. Re m ove a ll g ra ss a nd d e b ris, e sp e c ia lly
from the ve ntila tion slots.
He ight of Cut Adjustm e nt
To a d just the front a nd re a r whe e ls p ush the he ig ht-
of-c ut le ve r Fig 7A a wa y from the notc h Fig 7B.
Tip the ma c hine b a c kwa rd s or on its sid e (se e
Und e rd e c k Ac c e ss) Fig 10 a nd c le a n the b la d e
a re a . If g ra ss c utting s a re c om p a c te d in the b la d e
a re a , re m ove with a wood e n or p la stic im p le m e nt.
For front whe e ls - Move le ve r to the re a r to lowe r
whe e ls, a s shown Fig 7.
For re a r whe e ls - Move le ve r forwa rd to lowe r whe e l
a s shown Fig 7.
For stora g e in e xc e ss of 30 d a ys, run the e ng ine until
a ll p e trol is use d a nd the e ng ine stop s.
Alwa ys e nsure tha t ALL FOUR WHEELS a re a t the
sa m e he ig ht se tting .
Store the ma c hine in a d ry p la c e . Do not p la c e
othe r ob je c ts on top of the ma c hine .
Be fore m owing
To a id stora g e loose n the ha nd le wing nuts Fig 2B
a nd fold the ha nd le s.
1. Che c k the e ng ine oil le ve l a nd fill the p e tro l
ta nk.(Se e Pre p a ra tion).
Ensure c a b le is not tra p p e d whe n fold ing / unfold ing
top ha nd le s, DO NOT DROP THE HANDLES.
Note : Towa rd s the e nd of the se a son, it is
a d visa b le to p ut only a s muc h fue l in the ta nk
a s you ne e d for e a c h c ut, sinc e it should b e
c om p le te ly use d up b e fore storing the m owe r.
(Se e Afte r Mowing / Stora g e ).
Ma inte na nc e
Stop the e ng ine , a nd d isc onne c t the sp a rk p lug wire .
2. Ensure tha t the up p e r ha nd le is in p osition a nd
se c ure d by the wing nut Fig 2B.
Note : To e nsure long a nd re lia b le se rvic e , c a rry out
the following ma inte na nc e re g ula rly.
3. Se t the he ig ht of c ut a s re q uire d .(Se e He ig ht of
Cut Ad justm e nt).
Re g ula rly c he c k for obvious d e fe c ts suc h a s loose ,
d islod g e d or d a ma g e d b la d e s, loose fixing s, a nd
worn or d a ma g e d c om p one nts. Che c k tha t c ove rs
a nd g ua rd s a re und a ma g e d a nd c orre c tly fitte d .
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Step 2
Step 4
A
D
C
Step 3
Step 1
B
2
A
B
C
C
3
A
step 1
step 2
step 3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
A
B
6
A
B
C
Briggs & Stratton
Classic/Sprint
7
A
High
B
Low
B
Low
High
8
Briggs &
Stratton
A
Download from Www.Somanuals.com. All Manuals Search And Download.
9
D
B
A
C
10
Briggs & Stratton
A
11
A
D
C
B
Download from Www.Somanuals.com. All Manuals Search And Download.
Unde r-de c k Ac c e ss
b olt Fig 11B a nd ite m s C to D.
Ca ution: Oil a nd / or p e trol sp illa g e a nd ha rd sta rting
m a y oc c ur unle ss the following p roc e d ure is use d
whe n a c c e ss is re q uire d to the und e rsid e of the
m a c hine .
2. Cle a n a ll c om p one nts a nd c he c k for d a ma g e ;
re ne w a s ne c e ssa ry.
3. Asse m b le ite m s A-D a s shown, e nsuring tha t the
c one d wa she r D a nd the b la d e A a re the
c orre c t wa y up .
1. Ensure tha t the p e trol ta nk is e m p ty or ne a rly
e mp ty.
4. Tig hte n the b la d e b olt to a torq ue of 40Nm
(29lb ft).
2. For m od e ls fitte d with Brig g s a nd Stra tton
e ng ine s:
Eng ine Ma inte na nc e
Re m ove wing nut a nd b olt a nd lowe r the
ha nd le to re st on the floor Fig 10.
Pe rform the following op e ra tions a t the sp e c ifie d
p e riod s to e nsure long a nd re lia b le se rvic e from your
mowe r e ng ine .
Sta nd the ma c hine on its b a c k Fig 10. Do not tip
the m owe r on its sid e .
1. Cha ng e e ng ine oil - re fe r to e ng ine ma nua l for
d e ta ils.
Bla de Ma inte na nc e
Sta nd the ma c hine on its b a c k, or its sid e (se e Und e r-
d e c k Ac c e ss). Insp e c t the b la d e Fig 11A a nd c he c k
tha t the b la d e b olt Fig 11B is tig ht. If the b la d e is
b lunt or d a ma g e d , fit a ne w b la d e .
2. Che c k sta rte r c ord - e xte nd the sta rte r c ord a nd
c he c k for we a r.
3. Cle a n/ c ha ng e a ir filte r - re fe r to e ng ine ma nua l
for d e ta ils.
Use the following p roc e d ure to re m ove a nd re p la c e
the b la d e .
4. Cha ng e sp a rk p lug - re fe r to e ng ine ma nua l for
d e ta ils.
1. Hold the b la d e (using g love s or a p ie c e of
c loth). Using a nd re fe rring to Fig 11, re m ove the
Fa ult Finding
The following ta b le g ive s c he c ks a nd a c tions tha t you c a n p e rform if your ma c hine d oe s not op e ra te
c orre c tly. If the se d o not id e ntify/ re m e d y the p rob le m c onta c t your Qua lc a st a pprove d se rvic e a g e nt.
Wa rning - switc h e ng ine off a nd re m ove sp a rk p lug b e fore inve stig a ting fa ult.
Sym p tom
Possib le Ca use
Re m e d y
Eng ine will not sta rt
Out of fue l
Fill p e trol ta nk
Eng ine not p rim e d
Eng ine flood e d with fue l
Se e Sta rting the Eng ine
Le a ve for 10-15 m inute s; re sta rt
without p rim ing
Sp a rk p lug le a d d isc onne c te d
Sp a rk p lug d irty/ worn
Conne c t le a d
Se e e ng ine ma inte na nc e ma nua l
Se e Und e r-d e c k Ac c e ss
Ma c hine ha s b e e n inc orre c tly
tip p e d on its sid e
Eng ine stop s
Out of fue l
Fill p e trol ta nk
Cutting b la d e ob struc te d
Switc h off e ng ine a nd c le a r
ob struc tion
Eng ine sp e e d to low for c ond itions
(Mowe rs with throttle c ontro l)
Move throttle
Mowe r le a ve s ra g g e d finish
He ig ht of c ut too low
Cutting b la d e b lunt
Inc re a se he ig ht of c ut
Re p la c e b la d e
Und e rsid e of ma c hine b a d ly
c log g e d
Cle a n m owe r (se e Afte r Mowing /
Stora g e )
Bla d e fitte d up sid e d own
Re fit b la d e c orre c tly
La nd d rive d oe s not e ng a g e
(Se lf p rop e lle d m od e ls)
Drive b e lt d a ma g e d
Conta c t a Qua lc a st Ap p rove d
Se rvic e Ag e nt
Exc e ssive vib ra tion/ noise
Bla d e nut/ b olt loose
Tig hte n b la d e nut/ b olt
Re p la c e b la d e
Cutting b la d e d a ma g e d
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise Ce rtific a te
De c la ra tion of Conformity
This p rod uc t ha s b e e n ind e p e nd e ntly te ste d for noise in
a c c ord a nc e with the EU Noise le g isla tion. The following
noise c e rtific a te c e rtifie s its c om p lia nc e .
PRODUCT:
Troja n/ Qua d tra k
R434/ R484/ R484TR
Se e Ra ting d e ta ils
on ma c hine
MODEL/ TYPE REF:
SERIAL NUMBER:
We c e rtify tha t the la wnm owe r:-
MANUFACTURED BY:
IDENTIFICATION:
Ca ste l Ga rd e n S.p .A.,
Ca ste lfra nc o, Ita ly
Pe trol Rota ry
CATEGORY:
Pe trol
MAKE:
Qua lc a st
TYPE:
Rota ry La wnmowe r
R434/ R484/ R484TR
Brig g s & Stra tton
10D902
La wnm owe r
SERIES IDENTIFICATION:
MOTOR - MANUFACTURER:
MOTOR - Typ e
A Sa m p le of the p rod uc t ha s b e e n te ste d a nd found to
b e in c onfo rm ity with the following Sta nd a rd s:
Ma c hine ry Dire c tive 89/ 392/ EEC,
MOTOR - Sp e e d of rota tion
d uring te st (1/ m in)
2900/ 3000
Noise Le ve l Dire c tive 2000/ 14/ EEC
Ele c troma g ne tic Comp a ta b ility Dire c tive 89/336/EEC
a nd Din 1856: 1984
Conforms to the Sp e c ific a tions of Dire c tive
2000/ 14/ EEC re la ting to noise le ve l
Gua ra nte e d
All Ce rtific a te s a nd Re le va nt Te st Re p orts a re inc lud e d in
the Te c hnic a l Construc tion File whic h ha s b e e n a g re e d
with the British Sta nd a rd s Institute , 389 Chiswic k Hig h Roa d ,
Lond on W4 4AL
sound p owe r le ve l
96d B(A)
95d B(A)
Me a sure d sound p owe r le ve l
Typ e of c utting d e vic e
Bla d e wid th (c m )
Rota ry
41/46
PLACE: Ca ste lfra nc o, Ita ly,
DATE: Nove m b e r 2001
Sp e e d of rota tion of the
c utting d e vic e (1/m in)
2900/3000
Sig ne d a t Stowma rke t
Da te 2001
SIGNATURE:
SIGNATURE:
POSITION:
Dire c tor - Ca ste l Ga rd e n S.p .A. for Atc o-Qua lc a st Ltd .
Dire c tor - Ca ste l Ga rd e n S.p .A. for Atc o-Qua lc a st Ltd .
The a irb orne noise e m ission of this ma c hine ha s
b e e n m e a sure d a t 83d B(A). This is the e q uiva le nt
c ontinuous A-we ig hte d sound p re ssure le ve l a t the
op e ra tors p osition.
The vib ra tions tra nsm itte d a t the ha nd le of the
ma c hine whe n in m otion d o not e xc e e d 8m / s2. (The
we ig hte d root m e a n sq ua re a c c e le ra tion va lue .)
The m e a sure m e nt whic h d e te rm ine d the ma ximum
le ve l of vib ra tion wa s c a rrie d out on a ma c hine ,
sta nd ing on a ha rd surfa c e (Re fe re nc e BS6842:
1987).
The le ve l wa s c a lc ula te d from the m e a sure m e nts
ta ke n d uring the te st c a rrie d out in a c c ord a nc e
with Noise le ve l d ire c tive 81/ 1051/ EEC.
Conform ity a sse ssm e nt p roc e d ure Anne xe VI
notifie d Bod y.
SNCH 11 route d e Luxe m b org , L-5230 Sa nd we ile r.
For p rod uc ts num b e re d :
F016L80583
F016L80584
F016L80875
F016L80442
F016L80679
F016L80674
F016L80675
F016L80676
F016L80680
F016L80874
F016L80876
F016L80716
F016L80717
F016L80718
Download from Www.Somanuals.com. All Manuals Search And Download.
The Gua ra nte e
ix. Fa ilure is d ue to norma l we a r.The following p a rts
Ke e p a ll nuts, b olts a nd sc re ws tig ht to b e sure tha t
Atc o-Qua lc a st g ua ra nte e s this p rod uc t a ga inst
ma nufa c turing d e fe c ts. We will re p a ir (or re p la c e a t
our op tion) if a ma nufa c turing d e fe c t oc c urs within
the g ua ra nte e p e riod a s long a s it ha s only b e e n
sub je c te d to d om e stic use .
a re c onsid e re d a s we a ring p a rts.The ir life is
d e p e nd a nt on re gula r se rvic ing a nd the y a re
not the re fore ,norma lly c ove re d by the gua ra nte e :
Bla d e s
Be a ring s
Ca b le s
Be lts
For the p urp ose of this g ua ra nte e , d om e stic use
m e a ns a ny use of the p rod uc t on the p rop e rty
b e long ing to the p urc ha se r a nd form ing p a rt of the
g a rd e n a re a of his/ he r d we lling .
The c ost of routine ma inte na nc e of the p rod uc t is
not c ove re d by the g ua ra nte e .
The g ua ra nte e p e riod is one ye a r p a rts a nd one
ye a r la b our c osts from d a te of p urc ha se . (Exc e p t
e ng ine , se e e ng ine ma nua l for d e ta ils.)
It is in your b e st inte re st to follow the Op e ra ting
Instruc tions for your ma c hine , a s a p rop e rly c a re d for
p rod uc t should g ive ma ny ye a rs of e xc e lle nt
se rvic e .
To ob ta in a re p a ir und e r this g ua ra nte e :
•
•
•
Ta ke the p rod uc t to a n a p p rove d se rvic e a g e nt.
Show your d a te d p roof of p urc ha se .
Show this g ua ra nte e .
Should you re q uire re p la c e m e nt p a rts, a lwa ys insist
on g e nuine Atc o-Qua lc a st re p la c e m e nt p a rts. Any
d a ma g e c a use d to the p rod uc t throug h the fitting
of p a rts not ma d e b y Atc o-Qua lc a st is not c ove re d
b y the g ua ra nte e .
The g ua ra nte e d oe s not a p p ly if:
i. You c a nnot p rovid e d a te d p roof of p urc ha se .
Your sta tutory rig hts a re not a ffe c te d b y this
g ua ra nte e .
ii. The p rod uc t ha s b e e n re sold b y the orig ina l
p urc ha se r (this d oe s not a p p ly in the Re p ub lic
of Ire la nd ), or ha s b e e n use d und e r hire .
iii. The p rod uc t ha s b e e n m od ifie d to c ha ng e
the ma nufa c ture rs sp e c ific a tions, or if non
g e nuine re p la c e m e nt p a rts ha ve b e e n fitte d .
Environm e nta l Inform a tion
Your p rod uc t ha s b e e n ma nufa c ture d und e r a n
e nvironm e nta l ma na g e m e nt syste m using , whe n
p ossib le , the m ost e nvironm e nta lly re sp onsib le
ma te ria ls a nd p roc e sse s, a nd with the p ote ntia l for
re c yc ling a t the e nd of its life . The p a c ka g ing is a lso
re c yc la b le .
iv. Any p re vious re p a ir wa s und e rta ke n b y a nyone
othe r tha n a n a p p rove d se rvic e a g e nt.
v. The fa ult is d ue to ma la d justme nt, a b use , ne g le c t
or a c c id e nta l d a ma g e .
vi. The fa ult is d ue to la c k of lub ric a tion or
ma inte na nc e .
Whe n the tim e c om e s to d isp ose of this p rod uc t
p le a se c onsid e r the e nvironm e nt a nd ta ke it to a
re c og nise d re c yc ling fa c ility.
vii. Da ma g e to a ny p a rt, p a rtic ula rly the d rive or
c utting me c ha nism ha s b e e n c a use d by
a llowing the p rod uc t to strike solid ob je c ts.
(Ple a se c onta c t your loc a l a uthority for loc a tion
informa tion).
viii. The p rod uc t d e ve lop s a fa ult d ue to a b norma l
use .
Atc o -Qua lc a st Ltd , Suffo lk Wo rks, Stowma rke t, Suffo lk, IP14 1EY, Eng la nd
Te l: (01449) 742130 Fa x: (01449) 674243
Printe d in Eng la nd
Download from Www.Somanuals.com. All Manuals Search And Download.
F016L69886
|
PYLE Audio TV Mount PSW128ST User Guide
Reebok Fitness Home Gym RBBE04050 User Guide
Rosewill Webcam RIWC 11001 User Guide
Samsung Digital Photo Frame 1000P User Guide
Samsung Flat Panel Television LA52A610A3R User Guide
Samsung MP3 Player DVD TR520 User Guide
SATO Printer XL400 User Guide
Savin All in One Printer 9220 User Guide
Seagate Computer Drive ST11900W WD WC User Guide
Sennheiser Headphones HD HME 46 User Guide