1675 MacArthur Blvd., Costa Mesa, CA, 92626 USA
Main Number (714) 754-6175 Sales & Marketing (714) 957-7100 or toll free (USA only) (800) 854-4079
Customer Service(714) 957-7150 or toll free (USA only) (800) 772-2834
WideLine-8 Series Loudspeaker System User Manual
WL3082
WL212-sw
AF3082-S
AF3082-L
PB3082
EB3082
CP3082
CP212
full-range line array loudspeaker, black color (WL3082-WH for white color)
subwoofer line array loudspeaker, black color (WL212-sw-WH for white color)
small array frame for WideLine8, black color (AF3082-S-WH for white color)
large array frame for WideLine8, black color (AF3082-L-WH for white color)
pull-back bar, black (PB3082-WH for white color)
extension bar, black (EB3082-WH for white color)
cart and cover for WL3082 loudspeakers
cart and cover for WL212-sw loudspeakers
AF8-10
array frame adapter, WideLine-8 to Wideline, black (AF8-10-WH for white color)
*TD-000237-00*
TD-000237-00 revA
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The WideLine-8 is a high performance line array system designed for portable and installed sound reinforcement. The current WideLine-8
family is composed of the WL3082 line array element, WL212-sw subwoofer, AF3082-S small array frame, AF3082-L large array frame,
PB3082 pull-back bar, EB3082 extension bar, and AF8-10 WideLine-8 to WideLine adapter frame. For further information on available sus-
The WL3082 line array element uses two high-power, neodymium magnet, 2" voice-coil, 8" low-frequency drivers in a two-and-a-half way
configuration. Both woofers produce low-frequencies but only one covers the mid-range, resulting in far better horizontal directivity con-
trol in the crossover region. Excellent high-frequency output and clarity are provided by a 3.0" voice coil, neodymium magnet compression
driver with a titanium diaphragm. The compression driver is mounted to a patented multiple-aperture diffraction waveguide that provides
an extremely wide horizontal coverage of 140º. As a result, systems will rarely require side or center fill speakers and solid stereo imaging
is preserved across the listening area.
The low-frequency capability of a WL3082 array extends to 62 Hz (-10 dB); adequate for speech/vocal and acoustic music program mate-
rial. For reinforcement of program material with more demanding low-frequency content, the WL212-sw companion subwoofer is avail-
able.
1
Figure 1: WL3082 Loudspeaker
2
1- Suspension links
3
2- Suspension plate attachment holes
3- Driver access plate
4- Suspension alignment pin
5- Grille
4
5
6- Grille retaining screws (four total)
7- Ball-lock pins with lanyards
8- Recess for subwoofer feet
9- Landing skids
7
6
10- Input plate
11- Splay angle selection holes
12- Port/handle (patent pending)
13- Link slider knobs
8
14- Suspension attachment screws. Do not remove!
14
9
13
10
12
11
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
1
Introduction (continued)
WL212-sw
4
The WL212-sw subwoofer extends the
system’s low-frequency capability to 32
Hz with a compact fourth-order band-
pass enclosure. Its two ceramic magnet,
4” voice coil, 12” transducers provide
1100 watt continuous power handling
capability.
3
5
Figure 2: WL212-sw Subwoofer
1- Front suspension links
2- Rear suspension links
3- Port
6
Many users of line array systems have
found that suspending the subwoofers
with the array provides audible benefit.
Additionally, many venues lack physical
space for floor-mounted subs. For these
reasons, the WL212-sw includes sus-
pension hardware and, with selection of
the appropriate suspension accesso-
ries, subwoofers may be flown at the
top of or behind a WL3082 array.
4- Handles
7
5- Ball-lock pins with lanyards
6- Recess for subwoofer feet
7- Link slider knobs
8
8- NL8 and NL4 Speakon input panel
9- Rubber feet
Suspension
10- Driver access panel
11- Mounting screws (Do Not Remove!)
Suspending the WideLine-8 array is sim-
ple and flexible. Enclosures are built
with integral suspension plates and are
pinned together with ball-lock pins.
9
10
11
The AF3082-S and AF3082-L array
frames support most suspended appli-
cations, and the EB3082 extension bar
supports suspension where the center
of gravity is beyond the limits of either
frame. Additionally, the EB3082 is used
for arrays where subwoofers are flown
behind the main array. The PB3082 pull-
back bar is used for pulling back the bot-
tom element of the array for aiming and
stability or as the primary suspension
component for certain small arrays.
Figure 3: AF3082-L Array Frame
1- Shackle holes (accept 5/8”(16mm) screw pin anchor shackle)
2- Center support bar
Ground stacking is easily accomplished
directly on the subwoofer. The sub-
woofer has rubber feet to help keep the
stack in place. Uptilt or downtilt of the
groundstack is adjustable from -10° to
+10°.
3- Suspension plates
4- Suspension plate attachment holes
5- Screws for lanyard attachment
6- Ball-lock pins with lanyards
1
3
5
2
Use only shackle holes for
suspension of array!
4
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Use only shackle holes for
suspension of array!
Introduction (continued)
3
4
Figure 4: AF3082-S Array Frame
2
1- Shackle holes (accept 5/8” (16 mm) screw pin anchor shackle)
2- Center support bar
1
3- Suspension plates
5
4- Lanyard retaining screw for ball-lock pin lanyard
5- Suspension plate attachment holes
6- Ball-lock pins with lanyards
6
1
Figure 5: PB3082 Pull Back Bar
1- Shackle hole (accepts 5/8” (16 mm) screw pin anchor shackle)
2- Suspension plate attachment holes
2
4
3- Ball-lock pins with lanyards
4- Lanyard retaining screw for ball-lock pin lanyard
3
2
4
Figure 6: EB3082 Extension Bar
1- Extension bar
1
2- Suspension plate retaining bolts
3- Shackle holes (accept 5/8” (16 mm) screw pin anchor shackle)
4- Suspension plates
3
Figure 7: CP3082 Cart
Accommodates up to 4 WL3082 enclosures and includes a padded soft cover.
Figure 8: CP212 Cart
Accommodates up to 3 WL212-sw enclosures and includes a padded soft
cover.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction (continued)
1
Figure 9: AF8-10 WideLine-8 to WideLine Adapter Frame
1- WideLine attachment knuckles
3
2
2- Knuckle retaining bolt
5
3- Rear link receiver for WideLine loudspeaker
4- WideLine-8 attachment links
5- Suspension plate attachment holes
4
Suspending the WideLine-8 Array
Rules for Suspension
•Correct use of all suspension hardware and components is imperative in sound system suspension and deployment.
•Always calculate suspended loads before lifting to ensure suspension components and hardware are used within their respective load limits.
•Research local codes and regulations to fully understand the requirements for suspended loads in the venue in which the equipment is to be
suspended.
•Use only shackle holes for suspension of array.
•Be absolutely certain of the integrity of any structural member intended to support suspended loads. Hidden structural members can have hid-
den structural weakness.
•Consult a Professional Mechanical or Structural Engineer licensed in the jurisdiction of the sound system installation to review, verify, and
approve all attachments to the building or structure.
•Never assume anything- Owner or third-party supplied suspension attachment points may not be adequate for the loads to be suspended.
•Employ the services of a Professional Rigger for hoisting, positioning, and attaching the equipment to the supporting structure.
•Always inspect all components (enclosures, suspension brackets, pins, frames, bolts, nuts, slings, shackles, etc.) for cracks, wear, deforma-
tion, corrosion, missing, loose, or damaged parts that could reduce the strength of the assembly before lifting. Discard any worn, defective, or
suspect parts and replace them with new appropriately load-rated parts.
Shock Loading
When a load is either moved or stopped, its static weight is magnified. Sudden movements can magnify the static weight several times. This
magnification of static weight is termed "shock loading". Shock loading poses a danger to equipment and workers. The effects of shock loading
can be instantaneous, or they may remain undetected unless the equipment is visually damaged. Avoiding shock loading requires careful plan-
ning and knowledge of equipment, suspension, and lifting practices.
Shock loading of equipment and structures is usually confined to lifting and installation, but natural forces (winds, earthquakes) can impose
shock loads several times the static load. This is why structures and suspension equipment must be capable of supporting several times the
weight of the equipment suspended.
WideLine-8 Working Load Limits and Design Factors
Table 1 lists the WideLine-8 suspension components and provides Working Load Limit data at various Design Factors. The tabulated Design Fac-
tors are for static loads only. The choice of which Design Factor to use will depend upon the jurisdiction and venue of installation, as well as the
conditions of suspension. Dynamic conditions are determined by unknown, installation-specific factors and should be referred to a Licensed
Structural Engineer for clarification before proceeding with any suspension of the equipment. The data presented is based upon the listed compo-
nent weights:
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Suspending the WideLine-8 Array
1
Table 1: WideLine-8 Working Load Limits
Figure 10: WL3082 attached to AF3082-S
Component
Weight
7:1 Design Factor
10:1 Design Factor
12:1 Design Factor
EB3082 Extension Bar
27 lb
1751 lb
1100 lb
917 lb
(12.3 kg)
(714.3 kg)
(500.0 kg)
(416.7 kg)
AF3082-S Array Frame
AF3082-L Array Frame
PB3082 Pull Back Bar
WL3082 Loudspeaker
WL212-sw Loudspeaker
AF8-10 Adapter Frame
11 lb
(5.0 kg)
746 lb
(339.0 kg)
522 lb
(237.3 kg)
435 lb
(197.7 kg)
27 lb
(12.3 kg)
1274 lb
(579.2 kg)
892 lb
(405.5 kg)
743 lb
(337.9 kg)
3 lb
(1.4 kg)
434 lb
(197.4 kg)
304 lb
138.2 kg)
253 lb
(115.2 kg)
38 lb
(17.3 kg)
651 lb
(296.1 kg)
456 lb
(207.3 kg)
380 lb
(172.7 kg)
109 lb
(49.5 kg)
1274 lb
(579.2 kg)
892 lb
(405.5 kg)
743 lb
(337.9 kg)
9 lb
326 lb
228 lb
190 lb
(4.1 kg)
(148.1 kg)
(103.6 kg)
(86.4 kg)
Figure 11: WL3082 attached to AF3082-L
M8 Ball Lock Pin2
M8 Shoulder Screw2
3/4” Fastener2
n/a
n/a
n/a
1810 lb
(822.7 kg)
1267 lb
(575.9 kg)
1056 lb
(479.9 kg)
1847 lb
(839.4 kg)
1293 lb
(587.6 kg)
1077 lb
(489.6 kg)
5693 lb
(2587.8 kg)
3985 lb
(1811.4 kg)
3321 lb
(1509.5 kg)
2- Working Load Limits are per fastener loaded in double shear. Data is for informational purposes only.
Attaching WL3082 to Array Frame
Before beginning any installation, have your system designer configure the array with proper splay
angles using QSC’s EASE Focus (Array Calculator). All orientation of product is to be viewed from the
rear of the enclosure.
1. Attach the array frame to the suspension structure using a 5/8” (16mm) screw pin anchor shackle
and appropriate sling, cable, etc.
2. For arrays of 4 WL3082 or less, pin together the cluster of enclosures or prepare pre-pinned array
from transport cart. Note the QSC logo on the input plate will be right side up when the enclosure is
oriented properly. During assembly, ensure your splay angles are set as desired.
Figure 12: Detail of WL3082
attached to AF3082-L
3. Attach the array frame to the top enclosure by inserting the ball-lock pins in the appropriate loca-
tions. Ensure selection of the desired splay angle on the rear link (0°, +5°, -5°).
NOTE: For some array configurations, use of the extension bar and/or pull-back may
be required to achieve the required aiming angle.
When constructing large arrays it is recommended to first assemble units of four
enclosures and then assemble the final array by joining the four enclosure units to
one another.
Pin rear in center position for 0°
tilt. Upper and lower holes are for
-5° and +5°, respectively.
If extreme uptilt is required, turn the AF3082-L around (rotate 180°) and attach the
WL3082 enclosures toward the rear of the frame; this will allow suspending at a more
extreme upward angle. Note: The markings on the array frame are no longer valid
once the frame is turned around (their positions are reversed).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Suspending the WideLine-8 Array
Figure 15: WL212-sw attached to AF3082-S.
Suspending the WL212-sw beneath AF3082-S or AF3082-L
All orientation of product is to be viewed from the rear of the enclosure. The QSC logo on
the input plate will appear right side up when the enclosure is oriented properly.
1. Lower the array frame onto the subwoofer and align the appropriate holes in the suspen-
sion links and frame, fully insert the ball-lock pins, and ensure all pins lock properly. On
the array frame, use the center hole to attach the sub’s rear link (labeled 0°).
2. Attach the AF3082-S or AF3082-L array frame to the suspension structure using 5/8"
(16mm) screw-pin anchor shackle and appropriate sling, cable, etc.
Note! The +5° and -5° positions can not be used when suspending the sub-
woofer from the array frame.
Figure 16: WL212-sw suspended beneath AF3082-L
3. Before lifting, ensure the audio connection to the enclosures are correct and functioning.
NOTE: When arraying two or more WL212-sw subwoofers with one person,
it is easiest to lay the enclosures on their backs, align and mate the sus-
pension straps, and install the ball-lock pins. When installing the ball-lock
pins, ensure full insertion and locking action.
Suspending WL3082 enclosures beneath WL212-sw enclosures
1. For arrays of 4 WL3082 or less, pin together the cluster of enclosures or prepare pre-
pinned array from transport cart. When constructing large arrays it is recommended to
first assemble units of four enclosures and then assemble the final array by joining the
four enclosure units to one another. Note the QSC logo on the input plate will be right
side up when the enclosure is oriented properly). During assembly, ensure your splay
angles are set as desired.
Figure 17: WL3082 enclosures suspended
below WL212-sw with AF3082-S array frame.
2. Lower the array frame with subwoofer(s) onto the WL3082 enclosure cluster, carefully
aligning the appropriate holes in the suspension plates and links. Attach the top enclo-
sure to subwoofer by inserting the ball-lock pins, and ensuring all pins lock properly.
Ensure selection of the desired splay angle on the rear links (0°, +5°, -5°).
3. Before lifting, ensure the audio connection to the enclosures are correct and functioning.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Suspending the WideLine-8 Array
Pull-Back Bar
Figure 13:PB3082 under WL3082 attached to AF3082-S.
To use the pull-back bar, attach it to the bottom enclosure’s suspension
plates using one of the lower sets of splay angle adjustment holes.
Align the pull-back bar’s holes with the suspension plate’s and fully
insert the ball-lock pins. Ensure locking action of pins. Use a 5/8” (16
mm) screw-pin anchor shackle to attach to the pull-back bar as required
using the shackle holes.
NOTE: All hardware/components must be rated for the
expected loads as determined by the Professional Engineer
responsible for suspension.
NOTE: The PB3082 can also be used to suspend small arrays
of WL3082 enclosures. See page 10 for detailed information.
Extension Bar
The extension bar suspension plates can be moved, if required, by
removing the two 3/4”mounting bolts, moving to the selected mounting
location, and reattaching. Tightening torque is to be 100 lb-ft of torque
(135.6 N-m) Ease-Focus software’s center-of-gravity calculator will pro-
vide a suitable point for desired down-tilt.
Figure 14: Use of EB3082 Extension Bar.
Attach the array frame to the extension bar suspension plates by
centering the array frame member between the extension bar sus-
pension plates and bolting together using the supplied 3/4” bolts.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Suspending the WideLine-8 Array
Attaching WL212-sw behind WL3082 array using EB3082 and
Figure 18: EB3082 with WL212-sw suspended at
rear and WL3082 array suspended at front.
two AF3082-S array frames
1- Attach both AF3082-S array frames to the extension bar suspension plates by
centering the array frame member between the extension bar suspension plates
and bolting together using the supplied 3/4” bolts. The extension bar suspension
plates can be moved, if required, by removing the two 3/4”mounting bolts, moving
to the selected mounting location, and reattaching. Tightening torque is to be 100
lb-ft (135.6 N-m). Ease-Focus software’s center-of-gravity calculator will provide a
suitable point (or two points) for desired down-tilt.
2- Attach WL212-sw subwoofer(s) to the rear array frame
3- Attach WL3082 loudspeaker(s) to the front array frame.
NOTE: When stacking loudspeakers for attachment to array frames
using the extension bar, we recommend working with groups of 2
WL3082 for each WL212-sw. Start with no splay angle; this yields the
same height for landing the extension bar. Adjust splay angle once
the system is lifted.
Suspending 8 or less WL3082 Loudspeakers Using Two Pull-
Back Bars
NOTE: Do not suspend more than 8 WL3082 loudspeakers from a
PB3082 pull-back bar! Do not use PB3082 pull-back bar for suspend-
ing anything other than 8 or less WL3082 loudspeakers! Do not sus-
pend the WL212-sw from the PB3082 pull-back bar!
Figure 19: Using two PB3082 Pull Back Bars for sus-
pending a maximum of 8 WL3082 loudspeakers.
1- For arrays of 4 WL3082 or less, pin together the cluster of enclosures or pre-
pare pre-pinned array from transport cart. If constructing larger arrays we recom-
mended to first assemble units of four enclosures and then assemble the final
array by joining the four enclosure units to one another. Note the QSC logo on the
input plate will be right side up when the enclosure is oriented properly. During
assembly, ensure your splay angles are set as desired.
2- Pin one PB3082 to the top WL3082’s front suspension plate attachment holes.
Ensure locking action of pins.
3- Attach a 5/8” (16 mm) screw-pin anchor shackle to the pull-back bar’s center
shackle hole for lifting.
4- Pin a second PB3082 to the bottom WL3082’s rear suspension plate. Ensure
locking action of pins. Use a 5/8” (16 mm) screw-pin anchor shackle attached
through a shackle hole for pulling back.
Warning! Eight (8) WL3082 loudspeakers is
the maximum allowable load (10:1 design
factor) for the PB3082. Do not suspend
more than eight WL3082 loudspeakers from the
PB3082.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 20: 0° tilt WL3082 on WL212-sw
Ground Stack Configurations
The WL212-sw enclosure is fitted
with rubber feet on the bottom mak-
ing the enclosure itself suitable for
ground stack applications. Matching
recesses in the enclosure’s top sur-
face facilitate secure stacking of
one WL212-sw atop another.
The design of the suspension links
accommodates uptilt and downtilt
when attaching WL3082 enclosures
to the WL212-sw. Adjustment range
is from -10° to +10°.
Figure 21: -10° tilt WL3082 on WL212-sw
NOTE: Link sliders and pin locations determine
splay angle between enclosures.
NOTE: When groundstacking multiple WL212-
sw enclosures, ensure suspension is secure
prior to attaching array.
Figure 22: +10° tilt WL3082 on WL212-sw
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WL3082 Connections
The WL3082 input connectors are a pair of Neutrik NL8's
wired in parallel. See Table 2 or the pinout on the
WL3082 input plate (on rear of enclosure).
Table 2: WL3082 Connector Pinout
PIN
Connection
1+
1-
2+
2-
3+
3-
4+
4-
Through
Through
The WL3082 loudspeaker is not equipped with
a crossover network. All signal processing
must be done before connecting audio power
to the loudspeaker. Do not connect full-range
audio to the high-frequency transducer or dam-
age may result!
Right low frequency transducer + (16 Ohms)
Right low frequency transducer - (16 Ohms)
Left low frequency transducer + (16 Ohms)
Left low frequency transducer - (16 Ohms)
High frequency transducer + (16 Ohms)
High frequency transducer - (16 Ohms)
WL212-sw Connections
Input Connections
Table 3: WL212-sw NL8 Connector Pinout
The WL212-sw is equipped with two NL8 connectors with
pins 1+ and 1- connected to the transducers. All other
NL8 connections are paralleled between the two NL8s.
Additionally, pins 1+ and 1- are parallel connected to the
NL4s.
PIN
1+
Connection
Low frequency transducers + (4 Ohms)
Also connected to NL4 Pin 1+
1-
Low frequency transducers - (4 Ohms)
Also connected to NL4 pin 1-
The WL212-sw is also equipped with two NL4 connectors
that have pins 1+ and 1- connected to the transducers.
Pins 2+ and 2- of the NL4s are parallel connected. Only
pins 1+ and 1- of the NL4s are paralleled with the NL8s
1+ and 1- pins.
2+
2-
LF
LF
3+
3-
MID
MID
HF
Please refer to Tables 2 and 3 for pinouts. The pinouts are
printed on the input plate label, as well.
Note: pin numbers 1+ and 1- of all connectors
are wired in parallel. Pins 1+ and 1- are the
only parallel interconnect between the NL4
and the NL8 connectors. All remaining connec-
tions of the NL4 and NL8 connectors are inde-
pendent.
4+
4-
HF
Table 4: WL212-sw NL4 Pinout
Pin Connection
1+
Low frequency transducers + (4 ohms)
Also connected to NL8 pin 1+
1-
Low frequency transducers - (4 ohms), also
connected to NL8 pin 1-
2+
2-
Through
Through
12
Download from Www.Somanuals.com. All Manuals Search And Download.
WL3082 Specifications
Frequency Response:
68 - 18,000 Hz (+/- 3 dB)
62 - 20,000 Hz (-10 dB)
HF: 127/133 dB
Frequency Range:
Maximum SPL (continuous/peak):
Nominal Coverage (-6 dB included):
Transducers:
LF: 122/128 dB
Horizontal: 140 degrees (500 Hz to 3.2 kHz)Vertical: dependant on cumulative splay angles
High Frequency:
Single 85W, 16 Ohm, 1.4 inch exit, 3 inch composite polyimide diaphragm, neodymium magnet
Dual 250W, 16 Ohm 8 inch cone transducer, 2 inch voice coil, neodymium magnet,
weather resistant cone
Low Frequency:
Acoustic Crossover Frequency:
Input Sensitivity:
High to Mid: 1250 Hz
HF: 108 dB
Mid to Low: 300 Hz
LF: 98 dB
Weight:
Net: 38 lb (17.3 kg)
Shipping: 45.5 lb (20.6 kg)
Enclosure:
15mm Baltic birch plywood (baffle is 18mm Baltic birch plywood)
Steel (16 gauge) with cloth
Grille:
Connectors:
Two (2) Neutrik NL8 in parallel (wired as shown in Table 2)
Working Load Limit Information:
Component
Weight
7:1 Design Factor
10:1 Design Factor
12:1 Design Factor
WL3082 Loudspeaker
38 lb
651 lb
456 lb
380 lb
(17.3 kg)
(296.1 kg)
(207.3 kg)
(172.7 kg)
21.7”
(551mm)
19.9”
(505mm)
16”
(406mm)
19.6”
(497mm)
11.8”
(300mm)
9”
(228mm)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
WL212-sw Specifications
Frequency Response:
Frequency Range:
40 - 100 Hz (+/- 3 dB)
32 - 107 Hz (-10 dB)
Maximum SPL (continuous/peak):
Transducer:
129 dB/135 dB
1100W, dual 12 inch woofer, 4 inch voice coil, ceramic magnet assembly
Recommended Crossover Frequency:
Input Sensitivity:
30 - 85 Hz
99 dB
Weight:
Net: 109 lb (49.4 kg)
Shipping: 125 lb (56.7 kg)
Enclosure:
0.708 inch (18 mm) Baltic birch plywood, paint finish.
Connectors:
Two (2) Neutrik NL4 and two Neutrik NL8 all wired in parallel (wired as shown in Table 3)
Working Load Limit Information:
Component
Weight
7:1 Design Factor
10:1 Design Factor
12:1 Design Factor
WL212-sw Loudspeaker
109 lb
1274 lb
892 lb
743 lb
(49.5 kg)
(579.2 kg)
(405.5 kg)
(337.9 kg)
21.7”
(551mm)
20”
29”
(507mm)
19.6”
(736mm)
(498mm)
19”
(483mm)
15”
(380mm)
19.3”
(490mm)
15.2”
(387mm)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EB3082 Specifications
Material:
Aluminum 6061-T6
Finish:
Black powder coat (White optional)
Working Load Limit Information:
Component
Weight
7:1 Design Factor
10:1 Design Factor
12:1 Design Factor
EB3082 Extension Bar
27 lb
1751 lb
1100 lb
917 lb
(12.3 kg)
(714.3 kg)
(500.0 kg)
(416.7 kg)
47.8”
(1213mm)
1.4”
(34mm)
4”
6.8”
(102mm)
(172mm)
4”
12 x ø 0.8”
(20mm)
10.5”
(102mm)
(267mm)
AF3082-S Specifications
Material:
Aluminum 6061-T6
Finish:
Black powder coat (White optional)
Working Load Limit Information:
Component
Weight
7:1 Design Factor
10:1 Design Factor
12:1 Design Factor
AF3082-S Array Frame
11 lb
746 lb
522 lb
435 lb
(5.0 kg)
(339.0 kg)
(237.3 kg)
(197.7 kg)
21.7”
(551mm)
20.2”
(514mm)
19.9”
(505mm)
18.1”
2 x ø 1.0”
(25mm)
8.0”
(203mm)
(459mm)
1.0”
(25mm)
3.8”
(95mm)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AF3082-L Specifications
Material:
Aluminum 6061-T6
Finish:
Black powder coat (White optional)
Working Load Limit Information:
Component
Weight
7:1 Design Factor
10:1 Design Factor
12:1 Design Factor
AF3082-L Array Frame
27 lb
1274 lb
892 lb
743 lb
(12.3 kg)
(579.2 kg)
(405.5 kg)
(337.9 kg)
37.0”
(940mm)
21.7”
(551mm)
20.4”
(518mm)
4”
(102mm)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PB3082 Specifications
Material
Aluminum 6061-T6
Finish
Black powder coat (White optional)
Working Load Limit Information:
Component
Weight
7:1 Design Factor
10:1 Design Factor
12:1 Design Factor
PB3082 Pull Back Bar
3 lb
434 lb
304 lb
253 lb
(1.4 kg)
(197.4 kg)
138.2 kg)
(115.2 kg)
21.7”
(551mm)
20.0”
(508mm)
1.0”
(25mm)
3 x ø 0.8”
(20mm)
6.3”
(159mm)
1.0”
0.8”
(25mm)
(19mm)
AF8-10 Specifications
Material
Aluminum 6061-T6
Finish
Black powder coat (White optional)
Working Load Limit Information:
Component
Weight
7:1 Design Factor
10:1 Design Factor
12:1 Design Factor
AF8-10 Adapter Frame
9 lb
(4.1 kg)
326 lb
(148.1 kg)
228 lb
(103.6 kg)
190 lb
(86.4 kg)
19.2”
(487mm)
19.0”
(482mm)
27.3”
(693mm)
ø 0.4”
(9mm)
7.5”
(191mm)
3 x ø 0.3”
(8mm)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
This page was left blank intentionally.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
This page was left blank intentionally.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Contact QSC Audio Products
Mailing address:
QSC Audio Products, Inc.
1675 MacArthur Boulevard
Costa Mesa, CA 92626-1468 USA
Telephone Numbers:
Main Number
(714) 754-6175
Sales & Marketing
Customer Service
(714) 957-7100 or toll free (USA only) (800) 854-4079
(714) 957-7150 or toll free (USA only) (800) 772-2834
Facsimile Numbers:
Sales & Marketing FAX
Customer Service FAX
(714) 754-6174
(714) 754-6173
World Wide Web:
E-mail:
QSC Audio Products, Inc. 1675 MacArthur Boulevard Costa Mesa, California 92626 USA
©2007 “QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office.
Download from Www.Somanuals.com. All Manuals Search And Download.
|