MODEL QT17DVR4C
Digital Peripheral Solutions Inc
8015 Ecrystal Drive
Q- SEE Tech Support
IN USA
Anaheim, CA 92807
1- 714- 998- 3440
MON ITOR :9am- 5pm PST
TEL:1- 899- 998- 3440
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
Ma in s p e cific a t io n s for t h e sys t e m
Ca m e ra S p ecifica t io n
17'' 4:3 TFT/ LCD
Tube
Video Input
Four Channels Independent Input 1.0Vp- p, 75Ω BN C
，1.0Vp- p, 75 BNC,
Two Channels PAL/ NTSC output
Multiple Video Signal
Ω
Ca me ra Fe a tures
Video Output
One Channel VGA display interface output
Any Single picture, built- in quad display
1/ 3" Color C CD
Video
Video Display
Video Standard
PAL system 25 frames/ second CCIR 625 lines 50 fields
NTSC system 30 frames/ second CC IR625 lines 50 fields
R esolution 420 TV Lines
Weatherproof
R eal time recording resources, one or four channels play
backward can be realized at the same time；one or four
channels monitoring, network real time monitoring
System R esources
12 IR LEDS for Night vision
Audio Input
Two channels independent input 600Ω R CA
Audio Output
Two channels independent output 600Ω R CA
Basic Output Gain
Distortion Plus Noise
R ecording Solutions
Audio Compression
O perating Language
O perating Interface
Password control
Audio
1.0- 2.2V
≤- 30dB
Volume and Image are Synchronized
MPEG- 1 LAYER 2
English
S ys te m
OSD menu
Password for operators and administrators
Image Compression
/ Fixed bit streams
MPEG- 4 Changeable bit streams
H D1 format
Single picture：
pixels）
Image format
（704×576
6.25- 250Kbyte/ s
Video code rate
22.5M- 900Mbyte/ hour
Video volume taken in H.D.
Digita l
P roce s s ing
a nd
，real time monitoring
704 576 pixels
×
Play backward 352×288 Pixels
704×576 pixels，VGA output
R esolution
S tora ge
ISO14496
Video current standard
Audio current standard
ISO11172
24Kbyte/ s
Audio code rate
86.4Mbyte/ hour
Audio volume taken in H.D
One IDE hard disk, support H.D. with big volume of
200G or more
Internal Storage
Image quality
8 levels for adjusting：1- 8 levels
Date read and write way
Full duplex
- e1-
- e22-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
HDD S ta tus
HDD
Status
Capacity
160G
Free_Space
128,125MB
039,000MB
000,000MB
000,000MB
1
2
3
4
Video R ecord
Sleep
CAUTION
040G
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N one
000G
N one
000G
Return
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK,DO NOT REMOVE THE BACK.
NO USER SERVICEABLE PARTS
will enter into inquiry machine information interface, this interface will display current software
version and MAC address information.
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
Search Menu
All R ecord
Log
Graphic Sym bol Explanation
R ecord Status
HDD Status
Machine Info
Exit
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated 'dangerous coltage' within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
Version: 6214C- A- 01.000
The exclamation point withinan equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance
MAC Address: 000.111.111.111.110
R eturn
Software Version: display machine type, software type, panel information and version information;
MAC address: pressing [EN TER ] key or inputting digit according to need can setup.
Warning - To Prevent Fire Or Shock Hazard, Do Not Expose This Monitor
To Rain Or Moisture.
Note: only s upe r us er ca n hold cha nging MAC a ddre s s a uthority;
This Product Must Be Earthed.
4.5 Exit
Product Specification Is Subject To Change Without Notice.
Moving cursor to thisselection item, and pressing [EN TER] key to confirm will exit to inquiry menu,
and exit to monitoring image.
- e21-
- e2-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
IMPORTANT S AFEGUARDS
4.3 Vid e o Re co rd S t a t us .
Caution
Search Menu
All R ecord
Log
This equipment isto be opened by ONLY a qualified serviceperson. There are no user
serviceable parts inside. Opening this equipment may expose to dangerous voltage and
other risks. Incorrect re- assembly of this equipment may result in electric shock.
R ecord Status
HDD Status
Machine Info
Exit
All the safety and operating instructions should be read before the appliance is operated.
All operating and use instructions should be followed.
1. Read lnstructions:
2. Follow lnstructions:
3. Cleaning:
Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
Channel Status
Mode Status
F_Pic Idle
Q
1
Frame Alarm Motion Detect
25 close close
Do not use this monitor near water, for example, near a bathtub, wash bowl, kitchen
sink, laundry tub, in a wet basement, swimming pool, or any other wet surface.
4. Water and Moisture:
5. Accessories:
R eturn
Do not place this monitor on an uneven surface. The monitor may fall, causing
serious injury to a child or adult, and serious damage to the appliance. Use only
with a cart, stand, tripod, bracket, or table recommended by supplier, or sold
with the monitor.
Slots and openings in the cabinet are provided for ventilation to ensure reliable
operation of the monitor and to protect it from overheating, and these openings
should never be blocked by placing the monitor on a bed, sofa, rug, or other
similar surfaces. This monitor should never be placed near or over a radiator or
heat register. This monitor should not be placed in a built- in installation such as
a bookcase or rack unless proper ventilation is provided or supplier instructions
have been adhered to.
6. Ventilation:
1) Mode: Displays current image video recording mode, : Single mode, dual mode, quad image.
2) Status: video record/ sleep two status
3) Image quality: display video record data image quality
4) Frame rate: display video record frame rate information
5) Alarm: setting alarm/ cancel alarm two status, start alarm video record, will be setting alarm,
instead, will be cancel alarm
6) Motion detection: turn on/ turn off.
Never push objects of any kind into this monitor through openings as they may
touch dangerous voltage points or short- out parts that would result in a fire or
electric shock. Never spill liquid of any kind on the monitor.
7. Object and Liquid
Entry:
4.4 Hard Disk S t a tu s
Moving cursor to [Hard Disk Status] item, and pressing [ENTER ] key will enter into inquiry
hard disk status interface, this interface will display current hard disk status, including hard
disk's space and free space.
Do not attempt to repair this monitor yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer to qualified service personnel.
8. Repair(Servicing):
Search Menu
All R ecord
Log
Please consult the manufacturer for the replacement parts.
9. Replacem ent Parts:
10. Safety Check:
Upon completion of any service or repair to this monitor, ask the service
technician to perform safety checks to determine that the monitor isin proper
operating condition.
R ecord Status
HDD Status
Machine Info
Exit
The safety and operating instructions should be retained for future reference.
11. Retain Instructions:
- e3-
- e20-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
4.2 Lo g
Ch a p t e r 1 S u rve y o f Pro d u ct s
Moving cursor to [LOG] item, and pressing [ENTER ] key will enter into inquiry log interface
1.1 Pro d u ct s S u rve y
The equipment isa kind of small channels digital monitoring products which is specially designed for
Input date and type of the log
Type: All Event
security industry. It adoptsthe embedded processor and operating system and also integrates the
most advanced technologies in IT field, such as using MPEG- 4 video and audio compressing /
decompressing, recording by hard disk with big volume, TC P/ IP network and other technologies.
The code solidity in FLASH has changed the traditional mode of Monitor with DVR . It integrates
the Monitor with DVR instead ，which not only is more convenient for users to operate but also
makes the system more stable and convenient for maintenance.
Date : 2006- - 04- - 28- - 23- - 30
Start
R eturn
Format: includes all events recording mode, alarm mode, motion detection and operation mode;
According to the need select check time and click start.
1.2 Pro d u ct s Pro pe rt ie s
1. All Events: R ecord all system operation and alarm record;
l
Adopting the high- speed embedded micro- controller and also real time operating system, the
system has a super- high stability, high durability, without crash phenomenon and also easy for
maintenance.
2. Alarm Events: [ENTER ] key will enter into check alarm log interface. Thisinterface will display the
alarm situation that happened recently. Moving cursor to "up" and "down" place, and pressing
[ENTER ] key to turn over page. Alarm log will record exact alarm time in case of Video Loss/ Place
Setting/ Password Error.
l
l
Easy Installation and use.
Log Search: All Event
Two levels of password protection from administrator and user guarantees the safety of the
system.
04- - 02- - 15- - 30,
04- - 02- - 15- - 30,
04- - 02- - 15- - 30,
Video Loss 1
Place Alarm
Video Loss 2
l
l
The system adopts the OSD graphical interfaces, which is more convenient for users
to follow.
R eturn Page Up Page Down
The video compression adopts the pure hardware MPEG- 4 Changeable stream or MPEG- 4 fixed
stream，supporting the HD1 and CIF resolution recording in each channel, the frame rate for
recording is adjustable, with high sharpness but super- low hard disk space used.
Motion De te ction: Temporarily no record, same as in alarm mode;
Ope ra tion Affa ir: moving cursor to [Operation Log] item, and pressing [ENTER ] key into inquiry
operation log interface. This interface display recently happen operation situation:
l
l
Adopts FAT32 format to store, and can take one unit IDE hard disc upto 300GB.
Log Search: Operation Affair
For channels video input, two channels video output, one channel VGA output; Two channels
audio input, two channels audio output and one USB Port.
04- - 02- - 15- - 30
04- - 02- - 15- - 30
04- - 02- - 15- - 31
04- - 02- - 15- - 35
Manual Video R ecord
R estart
Pan/ Tilt Control
Parameter Change
l
Three channels
input, one channel linkage
output and one channel troubles
alarm
alarm
output.
alarm
R eturn Page Up Page Down
l
l
R eal time monitoring and playback in single picture mode, dual mode or quad mode
The system supports turning on and off the machine automatically. In case of power outage,
it resumes recording automatically once the power is restored. Alarm will go off automatically
when no video signal is being received. This eliminates the need to monitor the system frequently.
Moving cursor to "up" and "down" place, and pressing [ENTER ] key to turn over page, so can check
its record page by page.
- e19-
- e4-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
4.1 All Re co rd
l
Manual R ecording, time recording, alarm recording, motion detection recording saves the hard
disc space ensuring effective usage of the hard drive space for longer periods of time.
Moving cursor to [All R ecord] item, and pressing [ENTER ] key will enter into All R ecord interface:
Mode : moving cursor upon this selection item, and pressing [ENTER ] key can select different video
record format to inquiry (All video record/ Timing video record/ Alarm Video record)
Da te Time : Move cursor to this selection , and press [ENTER ] key or directly input the date and time,
based on the recording date and time you want to playback; N o press [STAR T] to see the available
recording for that duration. If there is no record found, it will say "No R ecord"
l
l
Motion detection recording function, can setup more than 192 detecting areas independently.
The system supports pre- alarm recording and alarm prolong recording guarantees, which
guarantees the integrity of alarm recording equipment.
l
Equipped With×2、×4times fast forward/ fast backward play functions and ×1/ 2、×1/ 4、
×1/ 8 times speed slow motion backward play, pause and frame play and others play control
functions.
2006- - 04- - 02 All R ecord
01 02 03 04 05 06 07 08 09 10 11
12 13 14 15 16 17 18 19 20 21 22
U P DN 23 24 25 26 27 28 29 30 31
N o R ecord
l
l
l
l
The system supports PAL/ NTSC systems，hence this system can be used universally.
R eturn
individually
Brightness, contrast, Color and Tint can be setup
for each channel.
Perfect alarm log and operating log facilitatesconvenient analysis and searching.
When selected date has video record, it will display below interface
R J- 45 universal network telecom interface， network transmitting ways include ADSL、ISDN、
LAN and CAN and so on；
2006- - 04- - 02 All R ecord
01 02 03 04 05 06 07 08 09 10 11
12 13 14 15 16 17 18 19 20 21 22
T
l
he included client software facilitates the long- distance monitoring and playback on net，
and supports TCP/ IP、UDP/ IP and many other net transport protocols.
UP DN
23 24 25 26 27 28 29 30 31
1 00000000 08: 00 - 09: 00 A 25
1 00000000 09: 00 - 10: 00 R 25
1 00000000 10: 00 - 11: 00 R 25
R eturn
l
R S- 485 interface equipped with the system can be used to control P/ T/ Z cameras with various
decode protocols .
l
VGA output has 720×480、1280×720 and 1920×1080 R esolution modes, better quality picture
could be attained by adopting progressive scanning.
You can also scroll through other dates during the month to view the recording. If the date is in
yellow color it means that there is a recording for that particular day. Press [ENTER ] to view
the available recording for that day.
l
l
Supporting IDE hard disk material backup.
Equipped with USB2.0 interface to the system,which could be used for backup to your PC or
laptop directly from the DVR hard drive .
2006- - 04- - 02 All R ecord
01 02 03 04 05 06 07 08 09 10 11
12 13 14 15 16 17 18 19 20 21 22
UP DN 23 24 25 26 27 28 29 30 31
1 00000000 08: 00 - 09: 00 A 25
1 00000000 09: 00 - 10: 00 R 25
1 00000000 10: 00 - 11: 00 R 25
Return
- e5-
- e18-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
CBR: Denotes fixed code flow'scoding format, this coding format shows, image quality is
invariable, but image quality can change according to moving object's scale inside, the larger the
moving object occupied in image's scale, the worse the image quality
Me ss a ge Sound S witch: When setting is turn on, hard disk error and password input error,
machine buzzer will sound.
Ch a p t er 2 Sys t e m In s t a lla t ion
2.1 Hard Driv e In st a lla t io n
Note: please set the hard disc to "Master"mode when connecting to the DVR .
La ngua ge s etting: Moving cursor to this item and pressing [ENTER ] key can switch Chinese and
English interface.
2.2 In te rfa c es o n Ba ck Pa n e l
P e ak s e gment s etting: Moving cursor to this item and pressing [ENTER ] key can enter into
corresponding interface.
P a cking time: Moving cursor upon this item and pressing [EN TER ] key to adjust, can select
30, 45 and 60 minutes packing time.
US B 2.0 s etting: Moving cursor upon this item and pressing [ENTER ] key to confirm will turn
on USB interface
Ins truction: After turning on USE 2.0 setting you can connect to PC computer (PC computer
only need USB 2.0 interface), and backup the files on your PC. O nce you select USB2.0 function
[R eturn], machine will restart.
EXIT
3.3.9Th e "
" ke y
Move the mouse to the topic of "EXIT" and press enter to save settings and back to the setting menu and
return the monitor TV screen.
：
VIDEO IN 1～4 Video Input
：
VIDEO OUT 1～2 Video Output
3.4 S u m m a ry o f o t h e r fu n ct io n s
：
US B One Channel USB terminal input
3.4.1 An a lo g fu n ct io n
：
NET O ne Channel NET terminal Input
When the system is in the single screen mode, the user can adjust the picture quality
：
AUDIO IN O ne Channel left/ O ne Channel right audio input
Brightne s s : press the analog key on the remote control, the screen will show "Brightness" on
the top right hand corner . Press "- " or "+ " to adjust the brightness as desired.
S a turation: Press the "Analog" key for second time and "Saturation" appears on the top right
hand corner. Press "- " or "+ " to adjust the saturation as desired.
：
AUDIO OUT O ne Channel left/ one Channel right audio output
：
VGA One Channel VGA terminal input
ALARM
Contras t de gree : Press the "Analog" key for third time and "Contrast" appearson the top
right hand corner. Press "- " or "+" to adjust the contrast as desired.
1
2
①、Alarm output
②、Alarm output
③、Ground wire
Hue : Press the "Analog" key for the fourth time and "Hue" appears on the top right hand
corner. Press "- " or "+ " to adjust the color as desired.
After running system, by pressing [Check] key will enter into inquiry menu, screen will display
main menu, pressing direction key to select wanted check item, and press [EN TER ] key enter
into this item.
1
④、Alarm input
⑤、Alarm input
⑥、Alarm input
1
2
3
4
5
6
7
8
9
2
3
Search Menu
All R ecord
Log
⑦、Ground wire
B
A
⑧、485
R ecord Status
HDD Status
Machine Info
Exit
⑨、485
- e17-
- e6-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
3.3.6 Ne t Pa ra m e t e r
Cha p t e r 3 S ys te m Op e ra t in g Man u a l
Move the cursor to the net parameter and pressenter to get into the system's net interface setting.
See picture below:
3.1 In s t ru ct io n s for fro n t p a n el a n d re m o t e co n tro l u n it
3.1.1 Fro n t Pa n e l
a). IP a ddres s : Press enter or manually type numbers on the IP address line.
b). S ub- ne t Ma s k: Moving cursor upon this selection item and pressing [ENTER ] key or input
number directly, set host IP address correctly according to host local LAN
c). De fa ult Ga te way: setting according to IP address
POWER
H.D.
ALA RM
NET
IR
d). Ba ndwith: Thisfeature can be used to set the speed of transfer of data over the network
Buttons on front panel and their functions:
① Indicating light area
3.3.7 Sys t e m In fo rm a t io n
(n e e d s cre e n sh o t )
NET：Indica ting light for ne twork
Moving cursor over [System information] and pressing [ENTER ] key enter into system
information setting interface.
When network connection is ok, it displays green, and when data is transferring it flashes.
ALARM：Indica ting light for a la rm
The alarm light will be on once the alarm is started
3.3.8 Ba s ic p a ra m e t e r
（ no matter what kind of alarm it is for）
H.D. ：Indica ting light for Ha rd Disk
The light turns on when Hard Disk reads and writes the data.
P OWER ：Indicating light for powe r
Ba s ic S e ttings
R ecord Settings:
Buiz Settings:
Setup
；
The power is on if the light turns red
Close
② Buttons a rea
Language Settings:
Fastigium Settings:
R ecordbag Settings:
USB Settings:
English
O pen
Me nu ope ra ting buttons
UP Directional button;
：
：Down Directional button;
：Left Directional button;
：R ight Directional button
30 minute
Setup
Video Spot Settings:
05 Second
：
【 】button for confirmation,choosing the menu items, and press this button to enter into
the selected sub- menu；Pressing this button can display the real time of the system
when playing back the recording;
Moving cursor to [Basic parameter] item (bottom color of character change to white means being
selected) and pressing [ENTER ] key enter to this item selection setting interface:
Afte r ente ring into s ub- me nu, move curs or up and down to s croll through the s ub
me nu.
Fu n ct ion al Bu tt o n s Area
：
【 】Button Main Menu, used for setting each parameters of the system.
：Play the existing recording on the hard drive;
【 】Button
【 】Button
：
Checking the menu buttons, used for checking recorded information on the hard disc;
Video recording parameter setting: Moving cursor upon this item and pressing [ENTER ] key takes
you to the corresponding interface.
：
；
【 】Button Exit button，exit from the current operating menu to last selected menu
Button: R ecording button,four channels manual recording can be started at the same time
when the screen is in built- in quad mode, dual views manual recording can be started
when the screen is under two channels surveillance state; Single channel Manual
recording can be started when the monitor is under single channel surveillance state
【 】
Image quality: Divided into "1- 8" different parameters. Press[Enter] to change this parameter
The smaller the digit, the better the image quality.
, it can divide into "25、12、06" three
Frames per second: When system has been set to PAL format
Button：
Button：
Button：
；
recording
2 and 4 times；
【
【
【
】
For stopping the recording button and the
manual
、15、08、"three ranks.
ranks, when system has been set to NTSC format, it can divide into "30
】
】
Fast R ewind button, at speed of ×
×
Moving cursor upon this item and pressing [ENTER] key will change its parameter.
，Play f
fast forward button
ast forward of the recorded picture at speed of ×2
Format: Moving cursor upon thisitem and pressing [ENTER ] key can switch system's video record
times；
and ×4
: VBR 、CBR .
coding format
Button：
Press this button continuously to see the picture frame by frame;
【
【
】
】
VBR: Denotes changeable code flow's coding format, this coding format shows, image quality is
invariable, but data code flow's size can change according to moving object's scale inside, the larger
the moving object occupied in image's scale, the larger the code flow.
Button：
between
mode；
built- in quad, dual and single picture
Used for switching
:
in the following order
Channel 1 Channel 2 Channel 3 Channel 4 Dual Views (Channel 1-
Channel 2) Dual Views (Channel 3- Channel 4) Built- in quad Channel1
- e7-
- e16-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
3.1.2 Re m ot e Con t ro l Un it
3.3.5 Ho u s in g s e t t in g
Moving cursor upon [Pan/ Tilt setting] and pressing [ENTER ] key can enter into quad channel
LOGI N/ LOCK
POWER ON
Pan/ Tilt port setting interface
PLAYBACK
QUAD
1
4
7
2
5
3
6
9
A. Channel: Denotes system's channel number.
PARAMET ER
ANAL OG
8
+
0
B. Protocol: Denotes the communication protocol between system and decoder. Moving cursor
to this selection item and pressing [EN TER] key can make selection among different protocol
(Pe1co- D/ P/ 09- 15/ Dscp/ FastDome/ PIH1016- 1017/ JECFastD/ R M110/ Neocam) Selected
protocol must match to the protocol of decoder, only can it control front equipment correctly.
C. Baud rate: Denotes communication speed between system and decoder. Moving cursor to this
item selection and pressing [ENTER ] key can make selection among different baud rate
(1200/ 2400/ 4800/ 9600), selected baud rate must match decoder's baud rate, only can it control
front equipment correctly.
ZOOM+
ZOOM-
FO CUS+
FO CUS-
EXI
T
AUTO
RECALL PRESET SWI TCH
PLAY
SLOW
REV
CF
FWD
NET
RECORD
STOP
SET UP
F1
F 2
F3
F4
D. Pan/ Tilt code: Moving cursor upon this selection item and pressing [EN TER ] can make
selection among different Pan/ Tilt serial number (01- 63), system's 01 code number match
Bu t t o n s o n Re m o t e Co n t ro l Un it a n d t h e ir fu n ct io n s :
① Digital Buttons Are a
to decoder's first address code, that is address code "01"
E. After setting up all item selection, move cursor to [R ETUR N] and press [ENTER ] key will
Button：
，when under the
【0- 9】
Digital buttons，used for using digit input or video switch
built- in quad state, press 1、2、3、4 digit buttons mean to switch the picture
return toprevious menu, and save Pan/ Tilt parameter setting.
；
output to the first, second, third and forth channel video single picture
Attention: Pan/ Tilt protocol, baud rate, Pan/ Tilt serial number three items must be in
accordance with outer Pan/ Tilt (quick ball) setting parameter.
】Button：
；
Adjusting various parameters
【+】、【-
② Me nu Ope rating Buttons Are a
Pan / Tilt operation: After setting Pan/ Tilt parameter correctly, press [F2] key on remote
control under single monitoring state, the top left corner of screen will display "Pan/ Tilt control"
character, temporarily, we can operate this channel's Pan/ Tilt by using press [F2] key on remote
control and panel.
：
UP Directional button;
：DOWN Directional button;
： LEFT Directional button;
：R IGHT Directional button;
】button：
, and press this button to enter
【ENTER
for confirmation，choosing the menu items
【 】、【 】
【 】、【 】
Ke y: Lensup and down motion, display character: up and down;
into the selected sub- menu；Pressing this button can display the real time
Ke y: Lensleft and right motion, display character: Pan/ Tilt left and right;
；
of the system when playing back the recording
【
】、【
】
Cha nge time s +
Cha nge time - Key: Adjust image far and near extent, display character:
③ P la tform control function buttons
- 】Button：
；
Change times + and change times - ;
】、【
【ZOOM+】、【ZOOM
Adjust the distance of the picture
- 】Button：
；
【APERTURE+】、【APERTURE
Adjust the brightness of the picture
【
】
Ape rture - Ke y: Adjust image bright and dark extent, display character:
Aperture +
- 】Button：
Adjust the sharpness of the picture
；
【FOCUS +】、【FOCUS
Aperture + and aperture - ;
Button：
；
Control automatically
【AUTO】
【RECALL
【PRES ET
【SWITCH
【Focus +】、【Focus - 】Ke y: Adjust image clarity extent, display character: Focus + and focus - ;
】Button：
】Button：
】Button：
；
standby button in control of platform
【
【
【
【
】
Automa tic Ke y: signifies automatic control, display character: Automatic
, standby button；
Preset control on platform
Trans fe r Ke y: Pan/ Tilt transfer control, display character: transfer 00, back key;
】
；
control on some assistant switch
】
P re- s e t Ke y: Pan/ Tilt preset control, display character: preset 00, back key.
④ P la y function buttons
Was he r switch/Light Ke y:
】
Washer switch and light assistant switch control, display character:
Button：
；
【PLAY】
Play the the recording on the hard drive
Washer switch;
Button： 1/ 2、×1/ 4、×1/ 8 times，or press
【SLOW】
Play the images slowly，at speed of ×
Pressing [F2] and [Pan/ Tilt] once more will exit Pan/ Tilt operation, and return to single image
monitoring state; Switch monitoring image and pressing [F2] key can enter into another channel
Pan/ Tilt operation.
】
；
【play button to return to normal playing speed
】Button：
【PAUS E/S ETP
Press one time to Pause the picture ,and then presscontinuously,
picture will be displayed frame by frame, press Play button to
【
】
Wa rning 1: When operating Pan/ Tilt function, system can't startup manual video recording
function.
return to normal speed of playing.
Play fast forward of the playback picture，at the speed of×
Button：
2、×4 times，press
【FWD】
Wa rning 2: When operating Pan/ Tilt function, once system startup video record (timing or
alarm startup), temporarily can't affect Pan/ Tilt operation.
Troubles hooting: When Pan/ Tilt doesn't operate normally, Please check R S- 485 (see "Alarm
Port lead line definition") and Pan/ Tilt parameter
】
；
【P lay Button to return to the normal speed of playing
Button： ， at speed of×2、×4 times，press
【REV】
Play fast backward of the playback pictures
】
；
【P la y Button to return the normal speed of playing
- e15-
- e8-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
e).Dela y the ala rm output: Under the alarm recording mode, the system is communicating the
alarm output signal with the alarm output end point automatically after moving the testing
signal has received the alarm signal from the I/ O . Delay the alarm output means delaying the
continuous time of the alarm's output signal.
Othe r function buttons
⑤
【POWER/ON】Button：for turning on and off the machine（Standby and start）；
【LOG IN/LOCK】Button：get the operating rights, to type in the password and lock operation；
【PLAYBACK】Button：For reviewing the recording, log, state of hard disc,information of
software edition and so on;
f). I/O a la rm output: Two choices are open or close. When system has received the alarm signal
from the I/ O, it will alarm from the output end point. When system has not received the alarm
signal from the I/ O , it will not alarm from the output end point.
【QUAD】Button：For switching pictures between built- in quad, dual views and single picture；
Order of Display: Channel1 Channel 2 Channel 3 Channel 4 Dual views
(Channel 1- Channel 2) Dual views(Channel3- Channel 4) Built- in
quad Channel 1
g).Motion alarm output the same as the above.
If you do not do the setting for each channel, it means invalid channel and that channel can't record
video, you can till see the image under monitoring if the channel has image signal But the system will
not prompt the alarm message if the image signal of this TV screen is lost.
【ANALOG】Button：display the brightness, contrast, colour and tint, adjusting its parameters
together with the adjustment of【+】、【- 】 button（This operation need
to be performed only when under single picture mode and thischannel should be
under non- recording state）；
【EXIT】Button：Exit button， exit from the operating menu to last selected menu directly.
【CF】Button：Enter into the standby menu for recording material, copy the material in hard disk
to the outward connected memory device（hardware with CF card connector
is needed）
3.3.4 Wo rk S e t u p
Re cord S e tup
【LANGUAGE】Button：Enter into ''language selection''menu directly to setup the language.
【NET】Button：Standby button；
Channel
Schedule
Setup
Area- Set
Setup
1
2
3
4
【RECORD】Button：Start the manual recording in single, dual or quad mode
【STOP】Button：Stop the manual recording（operating way is the same with that for【re cording】
button）；
Setup
Setup
Setup
Setup
Setup
Setup
【SETUP】Button：When login the system normally, press this function button to enter into the
menu setting of the system；
R eturn
【F1】Button：For pick time play on the recorded pictures；
【F2】Button：Pressthis button to enter into the control menu of platform when under the single
channel picture.
The content of the Work Set order includes scheduling recording for each channel and the setting
up of area for each channel for motion detection.
Press left, right, up and down buttons can do recording adjustment to platform camera；
P re s s【Zoom+】、【Zoom- 】Button：Adjust the distance of the picture；
Pre s s【Ape rture +】、【Ape rture - 】Button：Adjust the brightness of the picture；
Pre s s【Focus +】、【Focus - 】Button：Adjust the sharpness of the picture；
Pre s s【As s is tant】Button：Control on some assistant switch；
Pre s s【Auto】Button：Control automatically；
The spe cific ope ra tion of e a ch function is give n be low:
A.
Setting the re cording time : Press Setup for each channel under "Schedule" to setup the day
(Mon- Sun), Time of recording Ist Segment, recording mode(Time, Alarm or motion) Time
of recording 2nd Segment, type of recording mode. There are 2 segments of recording to
accommodate the change in date. For example, if you start recording at 11:30pm on Monday,
the Ist set will be 11:30pm to 11:59pm and the second set will be 12:00am to 11:
S urve y area s e tting: The picture above is showing that the whole screen is composed of
192 small areas. The blue color represents the area that has not been selected; the been purple
represents the area that has been selected; blue color the operating method is once getting into
the setting interface; the purple small square will be flickering between two colors alternatively
which are purple and blue.
Pre s s【Eve nt】Button：standby button in control of platform；
Pre s s【P re s e t】Button：Preset control on platform, standby button；
Press again the 【F2】button or 【Exit】 button to exit the
B.
setting for the platform control menu;
【F3】Button：Standby Button.
【F4】Button：switch between the monitor and VGA output；
Ope ra ting ways：Press 【F4】button in remote control unit to switch between
output of monitor and output of display when under monitoring. Its order is: output
of monitor VGA 1 VGA 2 VGA 3；There are three states for VGA output,
which can be adopted for different VGA standard.
If you press [Enter] The small purple square will change its color to two colors which are purple
and blue and it will be flickering alternatively.
- e9-
- e14-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
3.3.2 CHANNEL S ETU P
3.2 S ys t e m o n / o ff
3.2.1 Sy s t e m S t a rt
Channel setup setting includes channel name, screen display, clock insert,
TV screen cover, etc
When supplying power to DVR normally, the system enters into stand- by state（the indicating
light of the power－red led is on permanently）。
When press the【on/ off】button in the remote control unit，the system is started，pictures
displayed in the screen are built- in quad images，the digit showed in each picture means its video
input channel N o. the real time will be displayed at the top center of the screen.
Channel Setup
CH
1
Title C H Name Time InSert
Mask
Close
Close
Close
Close
CH View
Open
Open
Open
Open
Open
Down
Down
Down
Down
Note : If time recording has be e n setup in this ma chine (or a t high peak pe riod)，
a nd powe r is just conne cte d during this period, then the machine will s ta rt and e nte r
into multi- pictures s ta te dire ctly without ne e ding to pre s s【on/off】button again to sta rt
the ma chine .
2
Open
3
Open
4
Open
If the re is no dis pla y of vide o input cha nnel No in the s cre en a nd the re a l time for the
s ys te m, plea s e pre s s【ENTER】 button on the remote control unit or panel, and the channel
numbers will be displayed on the screen
R eturn
a). Channel: Enter the channel number. If it has a X symbol in front of the channel number code,
it indicates invalid channel.
If the hard disc has not been installed before turning on the machine, or the hard disc is not
detected by the machine after turning it on, the monitor with hard disc will set off the alarm,
Please log in the system to turn off the alarm.
Note: For each channel, it means the channel can't record video. However, you can still see the
channel image under monitoring if the channel has image signal. But, the system will not prompt
the alarm message if the image signal of this TV screen has lost.
3.2.2 Sy s t e m Lo g in
b). Title: Name of the channel. Enter the title of the camera location. Move the cursor to thistopic
and press enter and enter the channel title. When you have finished, press enter.
c). Screen Display: Two choices are switch on or switch off. If switch on is selected, it will show the
channel title while monitoring. If selecting switch off, it will not show channel title while
monitoring.
：
Note :
P re - delive ry code for this e quipme nt is：000，the de fa ult pa s s word for
a dministra tor is 88888888，a nd it is 00000000 for us e r. Adminis trator
ha s a ll the ope rating rights . In orde r to make s ure the s a fe running of the
s ys te m, administra tors should cha nge its code a nd de fa ult pa s s word of the
ma chine imme dia te ly.
d). Time Insert: There are three choices for users, up, down or close. Press Enter to make your selection.
When option up is selected, the time will be displayed on top of the screen, when option Down is
selected, the time will be displayed at the bottom of the screen. If the option Closed is selected,
the time will not be displayed on the screen.
When the host machine is started，user can only operate the system when logged in. If there is
no activity within 100 seconds after logging in, the system will enter into lock state!
When the machine is just started or under lock up state, press the【Login/Lock】Button on
R emote Control Unit，the login interface in the screen will appear, type in the code of the
machine（Pre- delivery setup：''000''），and then type in the password（password for
administrator or operator of this machine）.
e). Mask: Two choices for users are switch on or switch off. You can press enter for any changes.
TV mask used for covering the part of channel which is not to be recorded.
f). Channel View: Two choices for users are open or close. Open keeps the channel open for viewing
and close blocks the image from viewing.
⑴ If correct user's password is typed in，the monitor will show '' Password Correct'' message on
the screen, and then after [R eturn] for confirmation，users can operate each items within
the permitted field(the default password for user is：00000000）.
3.3.3 Alarm Setting
⑵ If correct administrator's password is typed in，the monitor will show Password C orrect
''
''
a). Te rminal: 1, 2, 3,
4 respectively represent 4 outer I/ O alarm input ports.
message on the screen，and then after [R eturn] for confirmation，administrator can perform
：
b). Ope n
Two choices are open or close. Open indicates the system has received the input alarm signals
all the operations in the machine（The default password for administrator is：88888888）。
from the I/ O end points. Close indicates the system has not received the input alarm signals.
/ short）closed circuit and open circuit.
C). inputting wa y: Two choices are（close
option to turn on / off alarm for each channel
Users have the
The re a re two pa ss word ma nage me nt- one for a dministra tor a nd a nothe r for us er,
Note：
diffe re nt ope ra ting ra nge will be pe rmitte d by inputting diffe rent pa ss word.
d).
Dela y a la rm recording: Under the alarm recording condition, the system receives the alarm signal
from I/ O. The system recording video is according to the time length which the user has already
set up. The system will stop recording video automatically when it has reached the end of its set time
since it has not received the alarm signal from the new I/ O .
- e13-
- e10-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD WITH BUILT- IN DVR USER MANUAL
LCD WITH BUILT- IN DVR USER MANUAL
3.2.3 S ys t e m On a nd Off
More the Arrow ke y to e a ch s ub- me nu a nd pres s e nte r for s e tting.
a). Time : When you have adjusted the year, month and day, the time will appeared automatically.
Move the cursor where you want to make the changes and press enter for adjusting or type in
the numbers using the remote control.
【on/ off】button in the
When the system is under monitoring state, please press twice of the
remote
system will change into standby state from
control unit if you want to turn off the system， The
running state when it is off；If you want to restart the system
the remote control.
, please press the 【on/ off】button
on
b). Machine 's s e ria l numbe r: Scope of input number is from ''000'' to ''999''. Machine's serial
number is already preset to ''000'' when the machine leaves the factory. You need to input
this number when the system is running.
If the system is under recording state, turn off or unplug power chord, and then turn on the power to
make the machine enter into standby state , the machine will start automatically, the recorded files
will redisplay its chapters.
c). Machine s addre s s : Enter manually the machine address here. Machine address could be the
address of the place being monitored thru this system. Move the cursor to the "address" line
and press enter to be able to enter the address and press enter again when finished. Use the
remote control to enter the numbers and letters. The number keys could be used for letters
similar to the keys on a standard telephone. For example "2" represents 2abc and likewise.
Note: The length input wordsshould be 8 characters or 4 words.
Note: The turn off ope ration ca n be a ls o be done whe n ma chine is under re cording a nd
pla ying s ta te .
3.3 Pro p e rt ie s S e t u p o f t h e s ys t e m
d). HDD overwrite : You have two options "O pen" & "Close" When "Open" is selected, it will
allow recording continuously even after the hard drive is full and video will be recording in
FIFO (First- in- first- O ut) format; When "Close" is selected, it will stop the recording
function once the hard drive is full.
When the system is running, press 【s e tup】 button to e nte r into the OSD main g me nu ma na ge d
、 、
to go to the desired menu，Press【EN TER】 to enter into each menu, and will be explained
the next section
、
directional buttons on the
'' remote control unit
by host ma chine , move the ''
by one
.
Vide o Sys te m: The video system can be changed from NTSC to PAL and vice versa using the left
e).
and right arrow keys on the remote.
f). Modify the a dministrator P IN code: Please press enter to get into the setting interface of the
administrator pin code! You can press the number keys on the remote control to enter the new
pin code .Please note that only the administrator has the authority to change the pin code.
g). Opera tor pin code : Press enter to get into the setting interface of the controller's pin code.
You can press the number key on the remote control to make any pin code corrections. Press the
Enter key to save this setting.
3.3.1 S ys t e m S e t u p
】(the color of the characters turns to blue with
Move the cursor to the position of【System setup
， fter entering into
while bottom)，Press【ENTER】button to enter into its setting interface
A
.
the sub- menu， highlight the items with cursor keysto change the value
S ys te m s et t in g s
Note: Please memorize your pin code and save it in a secure place to avoid it getting into the
wrong hands.
h). HDD format: Use this function to format the Hard drive.
Time: 2006- - 03- - 30. 09:33:08 Friday
My Number ： 000
Warning: All the data on the Hard drive will be lost.
i). Default Se tup: This function will reset the system to factory settings
j). EXIT: This function takes you back to the Main Menu.
My Address：
HDD Overwrite: O pen
System : ★PAL
NTSC
Password Enable: ★ Yes No
Admin- Pwd- Modify O perate- Pwd- Modifd
HDD Formal
Default Setup
R eturn
- e11-
- e12-
PDF created with pdfFactory trial version www.pdffactory.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|