Q See Home Security System QSDT404C User Guide

QSDT404C  
User’s Manual  
Contact US:  
Q-see Products  
8015E.Crystal Dr  
Anaheim, CA 92807  
Website:  
Customer Service:  
Phone: 877-998-3440 x 538  
Tech Support:  
Phone: 877-998-3440 x 539  
Fax:  
714-998-3509  
Rev 032109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC STATEMENT  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial environment. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the  
instruction manual, may cause harmful interference to radio communications. Operation of this  
equipment in a residential area is likely to cause harmful interference in which case the user will be  
required to correct the interference at his own expense.  
1 Introduction  
This miniature size product adopts an advanced microwave and wireless transfer  
technology developed and manufactured with 2.4GHz wireless digital receiving modules,  
which has stable performance and a strong anti-interference function. This product can be  
used with wireless cameras to record wireless camera signals.  
2 What's included:  
The following items should be included in the box. Please check that you have them all before  
installation.  
A One receiver  
B One power adapter for the receiver  
C 1 camera with power adapter  
D One RCA cable  
E stands of camera and receiver  
F screws for camera mounting  
3 Main features.  
3.1 Supports up to 4 cameras simultaneously.  
3.2 Digital 2.4G wireless modules.  
3.3 Supports A/V output from receiver  
3.4 Supports AE and AWB  
3.5 Supports OSD (On Screen Display) screen-controlled operation  
3.6 Supports 4 Channels displayed in order  
3.7 Supports automatic channel switch  
3.8 Transmission distance up to 100M (Tested in open air)  
3.9 M-JPEG format Compression  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Buttons On Receiver  
4.1 Mode switching  
4.2 Pairing  
Switch between quad mode and single channel mode  
Pairing the cameras and receiver  
OSD menu display  
4.3 Menu  
4.4 Auto Scan  
4.5 Right/CH2  
4.6 Up/CH1  
Switching the channels automatically with set time interval  
Move to the Right / Switch to Channel 2  
Move Up / Switch to Channel 1  
Switching the channel manually  
Move Down / Switch to Channel 3  
Move to the Left / Switch to Channel 4  
SMA antenna plug in  
4.7 Manual Scan  
4.8 Down/Ch3:  
4.9 Left/CH4  
4.10 SMA Antenna  
4.11 Power LED  
Red Light when power on  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Side panel  
5.1  
5.2  
A/v output  
Power input (DC 9V)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Camera Installation  
6.1  
Camera stand mounting screw (for ceiling mount)  
Power in cable (DC 5V input)  
Pairing button  
6.2  
6.3  
6.4  
6.5  
6.6  
SMA antenna plug  
Camera stand mounting screw (for desk top mount)  
Microphone  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Menu  
Enter the Menu option to setup the main feature of this product.  
Through Right/Left button can adjust parameters, and through Up/Down button can  
select the features to set.  
7.1  
Resolution (High / Low): When set to low, the image is not as clear, but it displays  
more frames per second. When set to high, the image will be clearer, but it  
displays fewer frames per second.  
7.2  
SCAN TIMEThis option sets the time interval between cameras when  
switching channels automatically. OFFScan is inactive. When on options are: 5  
seconds to 20 seconds between cameras.  
7.3  
7.4  
7.5  
AUDIO VOL: Adjust the volume of the audio from 0 to 20. Use the Left/right button  
to reduce/increase the volume.  
BRIGHTNESS: Adjust the brightness of images, range of brightness is from 0 to 5,  
use the Left/right button to adjust it.  
PAIR: Use this option to pair the cameras with specific channels, press the Pair  
button, use the Right/Left button to choose the channel; one channel can only pair  
with one camera. After selecting the specific channel and pressing the pair button  
again the window below will appear:  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the Pair the button on corresponding camera and wait for a while, the  
monitor connected to the receiver will display the images from the cameras  
that have been matched. Pairing succeeded.  
7.6  
7.7  
TV OUT: This option allows you to select the video format (NTSC/PAL) for video  
output resources. In the United States we use NTSC format.  
Channel selection keys  
You may select channels by using the corresponding keys on the receiver to  
manually choose channel.  
Channel 1Up  
Channel 2Right  
Channel 3Down  
Channel 4Left;  
Circulation ButtonMonitor screen circulates the image from Channel 1 to  
Channel4 then back to Channel1. The receiver will skip the channels that do not  
have cameras assigned to them.  
8 Troubleshooting  
Symptom  
Remedy  
The power does not  
turn on.  
l
l
l
Check that the AC power cord is connected securely.  
(In case of power failure) Check the breaker.  
Check if Monitor is on and video format (NTSC / PAL)  
is correct.  
No image display on  
monitor  
l
l
Check monitor’s video cable and connections.  
Confirm that the camera has power.  
l
l
l
l
l
l
Check if the audio cable is well connected to monitor.  
There is no sound.  
If there is a microwave oven close by, turn the microwave oven  
off.  
Interruption in  
You may have other units that run on the 2.4GHz signal. Move  
their base away from both the transmitter and/or the receiver  
Your home may have a metal frame that reduces the range of the  
unit.  
Image and Sound  
Move the Cameras and/or the receiver around to see it reception  
improves.  
Poor Reception  
Quality  
Try resetting Pairing between camera and receiver  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 Technical specifications  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Notes  
10.1  
10.2  
10.3  
10.4  
10.5  
This product can be damaged by pressure or impact.  
Any repair of this product should only be done by Professionals.  
This product should only be opened by Professionals.  
This product can not be used in high temperature environments.  
Replacement Parts – When replacement parts are required, be sure the service  
technician has used replacement parts specified by the manufacturer or have the  
same characteristics as the original part. Unauthorized substitutions may result in  
fire, electric shock or other hazards.  
10.6  
Digital Peripheral Solutions does not accept responsibility for any illegal use of this  
product by the customer.  
Q-SEE PRODUCT WARRANTY  
Thank you for choosing our products.  
All of our product users have a conditional free warranty repair service for  
hardware within 12 months starting from the purchase date, and a free  
exchange service within one month (valid for manufacturing defects).  
Permanent upgrading service is provided for the software.  
Liability Exclusions:  
Any product malfunction, abnormalities in operation or damage caused by  
the following reasons are not within the free service scope of our company.  
Please select payable service.  
(1) Equipment damage caused by improper operation  
(2) Improper environment and conditions in/on which the equipment operates,  
e.g., improper power, environment temperature, humidity and lightening strike  
etc. that cause equipment damage.  
(3) Damage caused by acts of nature: earthquake and fire etc.  
(4) Equipment damage caused by the maintenance of personnel not  
authorized by our company.  
(5) Product sold over 12 months ago.  
In order for us to provide various services to you please complete the  
registration procedure after you purchase the product. Cut off or copy User’s  
Information Card and fax or mail it to us after the card is filled in. You can also  
register the product by going to the www.q-see.com website and clicking on  
the Register link.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Information Card  
User’s Name  
Company  
Name  
Mr./Mrs.  
Postal  
Address  
Postal code  
Phone  
Number  
E-mail  
Model  
Number of  
Product  
Serial Number  
of Product  
Purchase  
Date  
Distributor  
If you have questions:  
Contact Us:  
Mailing Address:  
DPS Inc.  
8015 E. Crystal Dr  
Anaheim, CA 92807  
Customer Service:  
Phone: 877-998-3440 x 538  
Website:  
Tech Support:  
Fax:  
Phone: 877-998-3440 x 539  
714-998-3509  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The material in this document is the intellectual property of our company.  
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form  
or by any means without our company’s prior written permission.  
1. Our products are under continual improvement and we reserve the right to make changes without  
notice, therefore no guarantee is given as to the correctness of its contents.  
2. We do not accept any responsibility for any harm caused by using our product.  
3. The product picture may differ from the actual product, which is only for your reference. The  
accessories may be different in different selling areas. For details of accessories, please refer to your  
local distributor.  
Copyright reserved  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quadra Fire Cooktop 7068 112 User Guide
Radica Games Video Game Console 76037 User Guide
RCA Cordless Telephone 26930 User Guide
RCA Flat Panel Television PHD50500 User Guide
Ryobi Trimmer 130rEB User Guide
Salton Coffeemaker ME12CDB User Guide
Samson Musical Instrument TM 500 User Guide
Samson Stereo Amplifier MXS3000 User Guide
Samsung Microwave Oven MC17J8000CS User Guide
Sanyo Battery Charger CP 1700SCR User Guide