QSD2014 User’s Manual
Rev031309
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7：Playback ............................................................................................................................................ 14
Chapter 8： USB Program .................................................................................................................................. 15
8.1 Software Installation.................................................................................................................................... 15
8.3.1 HDD Play Mode .............................................................................................................................. 16
8.3.2 FILE Play Mode .............................................................................................................................. 17
Chapter 9： Specification .................................................................................................................................... 18
Chapter 10：Appendix ......................................................................................................................................... 19
10.2 Accessories .................................................................................................Error! Bookmark not defined.
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Chapter 1： DVR Features
DVR Features
MPEG4 Compression;
Video Input / Output：4-CH Video Input- 1-CH Video Output;
Good Image quality, High definition;
System Format: NTSC/PAL；
Uses SOC chip with high stability;
Linux operation System;
Supports Multiple recording Modes: Continuous, Motion Detection, Time Schedule
Supports Event List and Search/Playback by specified time;
Supports Hidden Channel and Playback display;
Missing Video signal Alarm Function;
Password Protection Function；
Supports IR Remote Control；
Supports SATA hard drive up to 500GB；
1
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Chapter 2：Layout
IR Receiver
2.1 Front Panel
Stop #10
Stop recording / playing
CH1 #1
CH2 #2
CH3 #3
CH4 #4
Quad #5
Channel #1
REC #11
Channel #2
Record
Menu/Esc #12
SEL/Edit #13
Up #14
Channel #3
Enter / exit setup menu
Select / modify item
Move up
Channel #4
Quad View
REW #6
Down #15
Rewind/Move Left
Pause
Move down
Pause #7
Play #8
PWR #16
HDD #17
Power indicator LED
Hard drive indicator
Play recorded video
Forward/Move Right
FWD #9
2.2 Rear Panel
4 BNC video inputs
1 BNC video output
Fan
Power Supply Input
Grounding Terminal
USB Port is located on the right side of the case when viewing from the front.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
2.3 Remote Control
1-9
0
Channel Select and numbers 1-9
Number
ALL
Menu
Display all Channels
Enter or Exit Menu
Move Up
▲
▼
Move Down
SEL
Select /Modify Item
Rewind/Move Left
Fast Forward
Move Left
Play Recording/Move Right
Record
●
■
Pause
Stop Recording/Playback
Audio Audio Input/Output
Mute Mute Audio
3
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Chapter 3： DVR Installation
3.1 Hard Disk Installation
Notice: Don’t take out the HDD when DVR is running.
(1) Remove the top cover carefully;
(2) Connect the power cord and data cable to hard drive;
(3) Replace the top cover;
3.2 Connecting Camera and Monitor
Attach the Camera cable to the DVR’s BNC video inputs, and DVR’s video output signal to
Monitor’s video input jack respectively (refer to Chapter-2.2 Rear Panel shown)
3.3 Connecting Power Supply
Please only use the power adapter supplied with the DVR.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Chapter 4：Starting the DVR
4.1 Firmware version
After turning on the unit, DVR will boot-up and
display the current version and release date of the
DVR firmware.
V2.X
V-EN-BG
2008.XX.XX
4.2 Detecting Installed Hard Drive
During start up, DVR will automatically detect
the installed hard drive and show the hard drive
information.
MASTER [MAXTOR STM3250310A]
SLAVE……
4.3 Format Hard Drive
When detecting a new hard drive, DVR will
automatically prompt you if you need to format the
hard drive before recording.
CHECKING HDD……
MASTER [MAXTOR STM3250310A]–NEW–DVR
FORMAT HDD CONFIRM
Please press [SEL] to format, or [MENU] to
cancel, and then start system.
(SELECT) FORMAT / (MENU) CANCEL?
5
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Chapter 5： DVR Menu System
5.1 Browsing the Main Menu
MAIN MENU
When start up is finished, please press [MENU] to
enter the Main Menu.
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY
HIGH
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
RESET MENU
(
) MOVE (SEL) SELECT (MENU)EXIT
5.2 Menu Directory
Camera Setup
Record Setup
Record Framerate
Video Quality
Change Password
Set Time
Hidden Channel
Image Parameters
Password Enable
Keypad Tones
Record Schedule
Sensor Setup
Main Menu
Hard Drive Setup
Miscellaneous Setup
Reset Menu
SEQ. DWELLTIME
VIDEO LOSSSOUND
Note: When the DVR is not setup to use a function, the option will not appear in the Menu. e.g. If a
camera channel is set to off, the item-“Audio Setup” will not be in the Menu.
5.3 Camera Setup
Camera Setup allows you to turn cameras on or off.
1
on
2
on
Channel Setup
Press [▲ ，▼，◄◄ and ►►] buttons to select a
channel, and then press [SEL] to modify the setting to
“on” or “off”.
3
(
on
4
on
6
) Move (SEL) Select (MENU) Esc
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Note：If a channel is disabled in Channel Setup, DVR will not record or set frame rate.
5.4 Record Setup
Record Setup allows you to set up recording channels.
Press [▲，▼，◄◄ and ►►] to select a channel, and then
press [SEL] to change the setting to on or off.
If a channel is disabled in Camera Setup, it will not be
recorded, and the characters “NOCAM” will be displayed
on screen.
1
ON
2
NO
Record Setup
3
(
ON
4
ON
) MOVE (SEL) SELECT (MENU) ESC
5.5 Record Framerate
The total frame rate is 50fps (PAL) or 60fps (NTSC).
You can set the frame rate for each channel to meet your
requirements up to the 50fps or 60fps limit.
1
3 FPS
2
5FPS
Record Framerate
TOTAL 36 FPS
3
(
25FPS
4
3FPS
) MOVE (SEL)+ ( ■ )-
(MENU) EXIT
Press [▲，▼，◄◄ and ►►] buttons to select a channel, and then press [SEL] to increase the value or
press [■STOP] to reduce the value.
Note: Higher frame rate shows smoother video, but requires more hard-drive space.
5.6 Video Quality
Video Quality has 4 different settings, including:
Main Menu
Highest, High, Normal and Low.
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
RESET MENU
The Higher the video quality, the better the quality
of Images, However higher quality images require
more hard drive space.
HIGH
Press [SEL] button to change the quality setting.
(
) MOVE (SEL) SELECT (MENU) ESC
7
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
5.7 Record Schedule
Setting the Record Schedule allows you to customize the type of recording you want to use depending on
the time of day.
The time line indicates 24 hours of a day based on
Record Schedule
AM/PM (0=12).
AM
PM
Press [▲，▼，◄◄ and ►►] buttons to select a
0… 3… 6… 9… 0… 3…. 6… 9…
time point, press [SEL] to modify the recording mode.
NO-RECORD
NORMAL-RECORD
SENSOR -RECORD
S
(
) MOVE (SEL) SELECT (MENU) EXIT
NO-RECORD [ WHITE ]:DVR will not record during this period.
NORMAL RECORD [ RED]:DVR will record continuously during this period.
SENSOR RECORD [ S ]:DVR will record when sensor or motion is triggered
Note: In order to activate the record schedule, please press [ REC] button to start Record schedule,
otherwise, DVR will not start recording.
5.8 Sensor Setup
Sensor Record Time indicates how long the
recording file remains open after the motion ends.
After this time the next alarm starts a new file.
Alarm on time indicates how long the buzzer
will sound when motion is detected.
SENSOR SETUP
SENSORED RECORD TIME
ALARM ON TIME
30
05
MOTION DETECTOR SETUP
(
) MOVE (SEL)SELECT (MENU)ESC
CONT: Continuous alarm until any key is pressed…
OFF: No alarm
Note: Sensored Record Time and Alarm On Time are measured in seconds.
5.9 Motion Detector Setup
This section allows you to set up motion detection options for each camera.
On/off: Enable or disable motion detection
recording.
Level: Sensitivity for motion detection. There
Motion Detector Setup
CH1
CH2
CH3
CH4
ON
ON
ON
ON
Level
Level
Level
Level
2
2
2
2
Area
Area
Area
Area
are 3 levels of sensitivity: Level 1 to 3 with 3 the
highest.
Area: Select detectable area on the screen.
(
) MOVE (SEL)SELECT (MENU)ESC
8
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Area Selection：Press [▲，▼，◄◄ and ►►]
buttons to select a block and then press [SEL] button
to set the block to detect motion. The area is
detectable when it is clear, the area is not detectable
when it is covered by shadow.
Press “Stop” button to disable all areas, and press “Quad” button to select all areas.
5.10 Hard Drive Setup
Hard Drive Setup
OVERWRITE ENABLED：
ON: System overwrites oldest files when hard drive
is full;
OVERWRITE ENABLED
MAXTOR STM250310AS
MASTER HDD SIZE
[ON]
250203MB
124931MB
MASTER HDD USED
MASTER HDD FORMAT
50%
OFF: System stops recording when hard drive is full.
SLAVE HDD SIZE
SLAVE HDD USED
SLAVE HDD FORMAT
N/A
N/A
(
) MOVE (SEL)SELECT (MENU)EXIT
HDD SIZE：indicates the total capacity of the hard drive installed in the DVR.
HDD USED：indicates the space used in the hard disk drive for recording and the percent used.
HDD FORMAT：will erase all video and data on the installed hard drive and make it readable by the DVR.
Note: You will be prompted for the password when formatting a hard drive and the default password is “111111”.
5.11 Miscellaneous Setup – Change Password
This option allows you to change the system
Miscellaneous Setup
password. The password must be six characters. All
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
keys can be used as a password key except the
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
[MENU] key, which is used to exit.
[ ON ]
(
) MOVE (SEL)SELECT (MENU)EXIT
Enter the current password first, and then enter
six characters as your new password, repeat the new
password to confirm.
If you forget your password, please free feel to
contact Q-See tech support for assistance.
[- - - - -]
CURRENT PASSWORD
NEW PASSWORD
COMFIRM PASSWORD
[- - - - -]
[- - - - -]
9
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
5.12 Miscellaneous Setup – Set Time
SET TIME
The system date and time format is YYYY/MM/DD and
HH:MM:SS.
Press [◄◄] or [►►] buttons to select a data, press [SEL]
button to modify the data, and press [MENU] button to save
and return to previous menu.
2008/11/11 17:50:01
(
) MOVE (SEL) SELECT (MENU) ESC
5.13 Miscellaneous Setup – Hidden Channel
Miscellaneous Setup
The system provides a function to hide a channel
in monitoring mode. The selected channel can still be
recorded while it’s hidden; but the video will not be
viewable on the live screen.
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
Press [SEL] to select a channel to hide.
[ ON ]
(
) MOVE (SEL) SELECT (MENU)EXIT
5.14 Miscellaneous Setup – Image Parameters
Miscellaneous Setup
You can adjust the image parameters to meet
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
[OFF]
your needs. The controls are shown below:
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
[ ON ]
(
) MOVE (SEL) SELECT (MENU) EXIT
CON：Contrast
BRI：Brightness
HUE：Hue (color)
SAT：Saturation (color)
Press [▲] or[▼] buttons to select the item, and
press [
] or [
] buttons to adjust the setting.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
5.15 Miscellaneous Setup – Password Enable
Miscellaneous Setup
When Password Enable is set to “on”, the
password will be required and must be entered
correctly; otherwise, you will not be able to enter the
system.
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
Entering the password will not be required if you
set to “off” (except of formatting hard drive and menu
[ ON ]
reset）
(
) MOVE (SEL) SELECT (MENU) EXIT
5.16 Miscellaneous Setup – Keypad tones
Miscellaneous Setup
This function allows you to enable or disable beeper
sound when pressing [SEL] button to select ON or
OFF.
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
[ ON ]
(
) MOVE (SEL) SELECT (MENU) EXIT
5.17 Miscellaneous Setup- SEQ. DWELL TIME
Press [◄◄], [►►] buttons to select
Miscellaneous Setup
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
Seq. Dwell time and select “on” / “off” to
enable or disable individual camera sequential
display.
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
Remark: Seq. Dwell Time Option can be
1sec, 5sec, 10sec, 15sec, 30sec, or 60sec
[ ON ]
(
) MOVE (SEL) SELECT (MENU)EXIT
5.18 Miscellaneous Setup- VIDEO LOSS SOUND
Miscellaneous Setup
This function allows you to enable or disable
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
buzzer sound when pressing [SEL] button to select
ON or OFF.
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
11
[ ON ]
(
) MOVE (SEL) SELECT (MENU)EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
5.19 RESET MENU
System allows you to reset all your settings to the DVR factory default. You need to enter your
password to reset the menu.
5.20 NTSC/PAL Output Select
Change the jumper JS1 to select NTSC or
PAL video output format shown on the silkscreen
shown in the picture on the left. The picture shows
the setting for PAL, move the jumper to the right
side for NTSC
Chapter 6：Record
6.1 Starting Recording
Press [●REC] button to start the record according to the record schedule you have set. There will
be a [●] red icon shown in the top left of the screen when recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
[●]：Indicates that the channel is being recorded.
[A-REC]：Indicates the current record schedule is set to NORMAL-RECORD mode.
[S-REC]：Indicates the current record schedule is set to SENSOR-RECORD mode.
[N-REC]：Indicates the current record schedule is set to NO-RECORD mode.
[39%]：Indicates the percentage of hard disk space used.
[M]：HDD info ([M] MASTER HDD；[S] SLAVE HDD).
6.2 Audio Recording
[ ]：indicates this video channel is assigned an audio port, and the audio output is on.
[ ]： indicates the audio output is off.
[ ]：indicates the audio is being recorded and the audio output is on.
You could press the [DOWN] button on front panel to mute the audio output, The audio input can
be still recorded while the output is muted.
6.3 Stopping Recording
Press [■STOP] button to stop recording. If password protection function is enabled, system will
prompt you to input password. Only correct password can stop recording process.
6.4 Estimated Recording Time
Estimated record time based on 160GB HDD
Standard
Quality
Highest
High
Normal
Low
60fps
62
88
107
120
48fps
78
110
134
150
32fps
116
165
201
225
16fps
232
330
401
450
1fps
3720
5280
6420
7200
NTSC
Standard Quality
Highest
50fps
64
90
110
123
36fps
89
125
153
171
24fps
133
188
229
256
12fps
267
375
458
513
1fps
3200
4500
5500
6150
High
PAL
Normal
Low
Unit： Hour
13
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Chapter 7：Playback
7.1 Playback Control
Press the [►] PLAY button to go into PLAYBACK mode. The newest recorded event will be
played.
Press the [MENU] button in Playback
mode， the system will list all the recorded
events. The latest record will be on top of the
list. Press the ［▲UP］or [▼DOWN］ buttons
to select an event and then press [►] to play the
event.
SEACH VIDEO
DISK: MASTER
SLAVE [NONE]
08/09/19 11:16:31 - 08/09/19 15:05:48
TYPE: EVENT
TIME
PLAY： EVENT LIST
00006 T 2008/09/19
00006 T 2008/09/19
00006 T 2008/09/19
00006 T 2008/09/19
00006 T 2008/09/19
00006 T 2008/09/19
00006 T 2008/09/19
15:07:40
14:07:40
13:07:40
12:07:40
11:07:40
10:07:40
09:07:40
（
)MOVE (SEL)SELECT
( ► ) PLAY (MENU) PREV MENU
14
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Chapter 8： USB Program
8.1 Software Installation
Insert software CD to your CD-ROM drive;
Open CD directory;
Run “Installation” program;
Follow the setup wizard to finish the installation.
8.2 Program Interface
Button functions：
NOTE: Since this DVR does not support PTZ cameras the functions marked as 1 and 2 will not work.
1. PTZ Control(NO Function)
11. Convert Streams to AVI file
12. Fast Rewind 60s
13. Fast Rewind 10s
14. Forward
15. Stop
16. Playback
3. HDD Play Mode
4. FILE Play Mode
5. NET Play Mode
6. Event List
7. Program Local Setting
8. Remote DVR Control
9. Shift Storage Device
17. Fast Forward 10s
18. Fast Forward 60s
19. Playback Slider
15
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
10. Capture Image
20. Audio Slider
8.3 Program Running
8.3.1 HDD Play Mode
System will detect HDD automatically when you connect DVR to your PC with USB cable. An
icon “ ” will appear in the system tray (right bottom corner of the screen). After seeing this icon,
double-click the “ ” icon on your desktop to run the program.
Note: If you do not strictly follow above-mentioned steps, the program may fail to read recorded files.
Press the “
” button to open the video event list.
Press the “
” button to access the program local settings. E.g.: Save location settings for
capture image and AVI record files
16
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Press the “
” button to play video.
8.3.2 FILE Play Mode
(Only when you have saved files to your PC.)
Press the “
” button to open a folder, select the file which you want to
Play and double click to play video.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Chapter 9： Specification
DVR Specification
Items
Video Standard
Descriptions
NTSC/PAL
Video Input / Output 4-Channels /1Channels
NTSC：720X480@30fps (Each CH)
Resolution
Features
PAL：720X576@25fps (Each CH)
Pre-view
Full-D1, 1-Channel/4-Channel
1-channel Playback display
NTSC：720X240@60fps (Total)
Resolution
PAL：720X288@50fps (Total)
Recording
Features
Quality
Variable Frame Rate
4 Level (Highest, High, Normal, Low)
Video
MPEG4 Compression
Motion Detection
Settable Detection Area and Sensitivity
Microprocessor
HDD Port
32-bit RISC Processor
Supports SATA HDD up to 500GB
USB2.0
USB Port
IR Remote Control
Supports IR Remote Control
18
Download from Www.Somanuals.com. All Manuals Search And Download.
QSD2014 User’s Manual
Q-See Product Warranty
Thank you for choosing our products.
All of our products users have a conditional free warranty repair service for hardware within
12 months starting from purchase date, and a free exchange service within one month (valid for
manufacturing defects). Permanent upgrading service is provided for the software.
Liability Exclusions:
Any product malfunction, abnormalities in operation or damage caused by following
reasons are not within the free service scope of our warranty. Please select payable service.
(1) Equipment damage caused by improper operation
(2) Improper environment and conditions in/on which the equipment operates, e.g., improper
power, environment temperature, humidity and lightening strike etc. that cause equipment
damage.
(3) Damage caused by acts of nature: earthquake and fire etc.
(4) Equipment damage caused by the maintenance of personnel not authorized by our
company.
(5) Products sold over 12 months ago.
In order to provide various services to you, please complete registration procedure after
you purchase the product. Cut off or copy User’s Information Card and fax or mail it to us after
and clicking on the Register link.
If you have questions:
Contact Us:
Mailing Address:
DPS Inc.
Customer Service:
Phone: 877-998-3440 x 538
Email: [email protected]
8015 E. Crystal Dr
Anaheim, CA 92807
Website:
Tech Support:
Fax:
Phone: 877-998-3440 x 539
Email: [email protected]
714-998-3509
20
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
Customer Information Card
User’s Name
Company
Name
Mr./Mrs.
Postal
Address
Postal code
Phone
Number
E-mail
Model Number
of Product
Serial Number
of Product
Purchase Date
Distributor
The material in this document is the intellectual property of our company.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by
any means without our company’s prior written permission.
1. Our products are under continual improvement and we reserve the right to make changes without notice.
But no guarantee is given as to the correctness of its contents.
2. We do not accept any responsibility for any harm caused by using our product.
3. The product picture may differ from the actual product, which is only for your reference. The accessories
will probably be different according to the different selling areas. For details of accessories, please refer to
your local distributor.
Copyright reserved
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|