Rack Mounting Guide
Fibre Channel Switch
3800/5800 Series
Rail Kit SB-RACKKIT
5
4
8
6
7
6
1
6
2
3
1. QLogic 5800/5802 (shown rear-facing)
2. QLogic 5802 (shown front-facing)
3. QLogic 3810 (shown rear-facing)
4. Rack rail (2)
5. Switch rail (2)
6. Screw, w/washer 10-32 x 3/8 in. (14)
a
7. Washer, centering (8)
8. Rack front
a
For use only on racks with square holes.
This guide describes how to mount the QLogic 3810 and 5800V Series Fibre Channel switches in a
rack using the rail kit (SB-RACKKIT). Switches can be mounted with the ports facing the front or rear of
the rack as shown.
Tools Required
Crosshead screw driver, medium
WARNING!!
Heavier products should be placed near the bottom of a rack or cabinet. A top-heavy rack can
become unstable resulting in equipment damage or personal injury.
59109-04 A
1
Download*from5Ww9w.S1oma0nua9ls.co-m. 0All M4anu als S earAch A*nd Download.
|