Pyramat Video Game Furniture PM440 User Guide

PM440  
SOUND ROCKER  
OWNER’S MANUAL  
Read and understand this entire manual before using!  
For assistance contact Pyramat. DO NOT RETURN TO STORE.  
Item Number:  
10175140  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
Remove the foam separators from the Sound Rocker and take unit out of box.  
Check to make sure you have all the parts shown below and that all items are in good condition.  
CAUTION: Keep  
fingers clear of the folding seam  
when opening the unit.  
Note: Replacement cables and mini  
adapters can be purchased at your  
local audio accessory dealer.  
11 ft. 12-volt AC power adapter  
11 ft. red and white  
RCA audio cable  
RCA to mini audio cable  
(2) RCA audio cable extenders  
FEATURES  
Adjustable Headrest  
Speakers  
MP3 and portable CD player plug  
Input RCA audio ports  
Connect red and white RCA audio  
cable here from game consoles, home  
theater, satellite receiver and stereo  
receiver.  
Power AC port  
Connect supplied 12-volt power  
adapter here.  
Control panel  
Bass knob  
Twist to adjust the bass to  
your preference.  
Source knob  
Headphone port  
Connect headphones here.  
Select IN for video games, home  
theater, satellite receiver and  
stereo receiver. Select MP3 for  
MP3 and portable CD players  
connected to the MP3 and  
portable CD player plug.  
Multi-player RCA audio output ports  
Connect up to four Sound Rockers together for  
multi-user fun.  
Volume/power knob  
Twist to click on and power up  
and adjust the volume level.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
SET-UP  
CAUTION: Keep  
fingers clear of the folding seam  
when folding or unfolding the  
rocker.  
11 FE  
E
T
OR LESS  
2 Place the Sound Rocker so  
that the control panel is less than  
11 ft./3.5 meters from the power  
source.  
3 Connect the 12-volt AC power  
adapter to the electrical outlet and  
then to the power AC port on the  
control panel.  
1Unfold the top portion of the  
Sound Rocker until the backrest  
is flush with the seat portion.  
4Twist the volume knob on the  
control panel to click on and test  
the power. When the power is  
on all the knobs light up.  
Twist volume knob to power off  
the Sound Rocker, then proceed  
to the connection method shown  
for your audio/video device.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIRECT CONNECTION METHODS  
Video Game Console Connection  
XBOX 360TM, PLAYSTATION 2TM, PLAYSTATION 3TM, GAMECUBETM AND OTHERS  
There are four types of audio/video cables that come with video game consoles:  
1. Standard AV/RCA Cable  
(red, white–audio; yellow–video)  
2. S-Video AV/RCA Cable  
(red, white–audio; yellow, black–S-video)  
3. High Definition AV/RCA Cable  
(red, white–audio; yellow, blue, red, green–video)  
4. Coaxial Connection  
(single black cable)  
If you have this cable, you need to purchase the RCA  
audio cable from the console manufacturer. Or, you  
can connect the Sound Rocker through an intermediary  
audio source such as a TV, DVD, VCR, etc. (see below).  
TV  
The yellow RCA video cable  
VIDEO  
GAME  
CONSOLE  
connects to the VIDEO INPUT  
jack on the TV. Refer to the  
instructions from the video  
game console’s manufacturer  
to connect any other video  
cables to your TV.  
RCA AUDIO CABLE  
EXTENDERS  
White  
Red  
White  
Red  
Yellow  
1 Turn the source knob on the  
control panel to IN. Proceed to the  
connection method for your video  
game console.  
2 RCA Audio Cable Connection  
For standard AV/RCA Cable, S-Video AV/RCA Cable and High Definition AV/RCA Cable  
Connect the RCA audio cable extenders to the red and white audio cable from the video game console. Connect the  
supplied RCA audio cable to the video game consoles red and white audio cables and plug into the input jacks on the  
Sound Rocker. Follow the instructions from the video game console’s manufacturer to connect the video cable to your  
television.  
OR  
2 Coaxial Cable Connection  
If your video game console has a coaxial cable instead of an RCA audio cable, then use the instructions provided by  
the video game console’s manufacturer to hook up the video game console through an intermediary device (such as a  
TV, DVD, VCR, satellite receiver, etc.). Your intermediary device must have both a coaxial input jack (the standard jack  
for cable TV) and an RCA audio output jack, or you can purchase an RCA replacement cable directly from the console  
manufacturer. Then follow the audio/video device connection instructions below to connect your Sound Rocker.  
Audio/Video Device Connection  
TV, DVD PLAYER, VCR, SATELLITE RECEIVER, STEREO  
TV  
DVD  
VCR  
AUDIO  
OUTPUT  
White  
Red  
SATELLITE  
RECEIVER  
STEREO  
1 Turn the source knob on the  
2 Connect the supplied RCA audio cable from the red and white input jacks on the Sound Rocker to the red and white  
control panel to IN.  
AUDIO OUTPUT connection on your audio/video device.  
Note: Connection must be made to an AUDIO OUTPUT source. The red and white audio connections on the  
front of most devices are AUDIO INPUT. SOUND WILL NOT PLAY FROM AN AUDIO INPUT SOURCE.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIRECT CONNECTION METHODS  
Multi-User Connection  
CONNECT UP TO FOUR SOUND ROCKERS TOGETHER FOR MULTI-USER FUN!  
VIDEO GAME  
SYSTEM  
TV  
AUDIO  
OUTPUT  
DVD  
VCR  
SATELLITE  
RECEIVER  
STEREO  
1 After connecting one Sound Rocker to an audio/video device, you can connect additional Sound Rockers together.  
Connect the supplied RCA audio cable to the multi-player connection on the first Sound Rocker and then to the input  
connection on the second Sound Rocker. Repeat to add more Sound Rockers.  
Portable Audio Device Connection  
CAUTION: Power  
off all audio/video devices prior to  
proceeding with the Sound Rocker  
connection method.  
1 Turn the source knob on the  
2 Connect the player to the Sound  
Rocker with the cord inside the  
pocket.  
control panel to MP3.  
Handheld Game Device Connection  
White  
White  
Red  
NINTENDO DS  
NINTENDO DS LITE  
PSP  
Red  
1 Turn the source knob on the  
2 Connect the supplied RCA audio cable from the red and white input jacks on the control panel to the red and white  
RCA to mini cable and into the headphone jack on your handheld game device.  
control panel to IN.  
Note: If your handheld gaming device does not have a headphone jack it is not compatible with the Sound Rocker.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
Problem  
Possible Cause  
Solution  
Unable to hear sound  
The RCA audio cables are not  
connected properly.  
Check the connection on your audio/video device. The RCA cables should be  
connected to the AUDIO OUTPUT jacks. Check the connection on your rocker.  
The RCA cables (red and white) must be in the AUDIO INPUT ports.  
The AC power adapter is  
disconnected from the electrical  
outlet or the electrical outlet has  
no power.  
Check the plug on the AC power adapter. When properly connected with the  
volume knob on, the control panel and speakers will illuminate.  
If the Sound Rocker still doesn’t power up, try another electrical outlet.  
The source knob on the control  
panel is in the wrong position.  
Turn knob to IN for video games and audio/video devices. Turn knob to MP3  
for MP3 and portable CD players.  
Unable to connect to the  
gaming console  
Cables are incorrectly connected.  
Check that the console’s RCA audio cables are connected to the Sound  
Rocker’s RCA audio cables (red to red and white to white).  
Check that the Sound Rocker RCA audio cables (red and white) are connected  
to the AUDIO INPUT jacks on the rocker.  
Check that the console’s RCA video cable (usually yellow) is connected to the  
VIDEO INPUT jack on the TV.  
If your video game console has an RCA audio cable, then connect the RCA  
audio cable extenders to the red and white audio cables from the video game  
console. Connect the supplied RCA audio cable to the video game console’s  
red and white audio cables and plug into the input jacks on the Sound Rocker.  
Your video game console has a  
coaxial cable instead of an RCA  
audio cable  
Use the instructions provided by the video game consoles manufacturer to  
hook up the video game console to an intermediary device (such as a TV,  
DVD, VCR, satellite receiver, etc.). Your intermediary device must have  
both a coaxial input jack (the standard jack for cable TV) and an RCA audio  
output jack.  
Purchase an RCA replacement cable directly from the console manufacturer.  
Check that all RCA audio connections are correct – red to red, white to white  
Sound only plays from one RCA cables are incorrectly  
speaker.  
connected.  
Audio/video device has a single  
MONO audio output (a common  
problem when connecting to an  
older TV or VCR).  
If your audio source is mono only, as found mainly on older model TVs and  
VCRs, an RCA “Y” adaptor (1 male to 2 male; not included) is needed to send  
the signal to both Pyramat speakers. Please note: the use of this type of  
adapter will not produce a true stereo sound. For optimal performance, it is  
recommended that you connect your Pyramat product to stereo outputs only.  
No sound will play from the RCA audio cables are incorrectly  
Sound Rocker.  
connected.  
RCA audio cables (red and white) must be plugged in to AUDIO OUTPUT jacks  
in the source device (TV, VCR, etc.). If you are plugging the cables to the jacks  
in the front of your TV these are most likely AUDIO INPUT jacks.  
Sound Rocker plays sound Source knob is not on the correct  
See page 2 for the correct knob position for the device you are playing.  
from one source but not  
another.  
setting.  
RCA cables are incorrectly  
connected.  
Check that all RCA audio connections are correct – red to red, white to white  
Missing or broken cables or  
mini adapters.  
Replace items immediately. Replacement cables and mini adapters can be  
purchased at your local audio accessory dealer.  
Missing or broken power  
adapter.  
Replace immediately with an authorized Pyramat power adaptor. Do not use  
the unit until the damaged power adapter has been replaced.  
Need Help? Visit our website at www.pyramat.com, send an e-mail to [email protected]  
or call toll-free at 877-591-1012.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY  
PM440 Sound Rocker Limited Warranty  
REPAIR OR REPLACEMENT AS PROVIDED UNDER  
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE  
CONSUMER. PYRAMAT SHALL NOT BE LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES  
FOR BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY ON THIS PRODUCT. EXCEPT TO THE  
EXTENT PROHIBITED BY APPLICABLE LAW, ANY  
IMPLIED WARRANTIES, INCLUDING WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED IN DURATION  
TO THE LENGTH OF THIS WARRANTY.  
Pyramat warranties this product and any included  
accessories against defects in material and  
workmanship for a period of 90 days from the date of  
first consumer purchase. This warranty is enforceable  
only by the original purchaser. ALL DAMAGED OR  
MISSING PARTS MUST BE REPORTED WITHIN 14  
DAYS OF PURCHASE.  
This warranty covers all defects in materials and  
workmanship, but DOES NOT COVER the following:  
1. Damage, deterioration or malfunction resulting from:  
Some states do not allow the exclusion or limitation of  
incidental or consequential damages, or allow limitations  
on how long an implied warranty lasts, so the above  
limitations may not apply to you.  
a. Acts of God, accident, misuse, abuse, negligence,  
improper installation, maintenance or operation, or  
failure to follow the instructions contained in this  
manual.  
TO OBTAIN WARRANTY SERVICE  
For service assistance, product information, or to locate  
the dealer nearest you, please call or write:  
b. Any shipment of the product (claims must be  
presented to the carrier).  
c. Repair, attempted repair or modification by anyone  
other than the Pyramat Service Center.  
Pyramat Service Center  
877-591-1012  
2. Any unit which has been altered or on which the  
serial number has been defaced, modified or removed.  
For further information on how to order accessories for  
this product or other Pyramat products, please visit our  
website at www.pyramat.com.  
3. Any unit used for industrial or commercial purposes.  
4. Products sold AS IS or WITH ALL FAULTS, or  
consumables (such as fuses or batteries).  
IMPORTANT  
For your records, save your original sales receipt with  
this manual.  
5. Customer installation, set-up, adjustments or signal  
reception problems.  
Pyramat will repair or replace (at its discretion) units  
covered by this warranty, without charge to the  
consumer for labor or materials. CONSUMER IS  
RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL  
CHARGES AND ANY INITIAL SHIPPING CHARGES.  
However, we will pay the return shipping charges to  
any destination within the United States if repairs are  
covered by the warranty.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you have problems with your Sound Rocker,  
DO NOT RETURN TO STORE.  
Follow instructions in this manual.  
Failure to follow these instructions may damage  
your Sound Rocker and void your warranty.  
Need Help? Visit our website at www.pyramat.com, send an e-mail to [email protected]  
or call toll-free at 877-591-1012.  
Printed in China for:  
Pyramat, LLC  
PO Box 3610  
Cerritos, CA 90703  
© Copyright 2006 Pyramat, LLC  
09182006  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

QUAD Stereo Amplifier II Classic User Guide
Revolabs Wireless Office Headset 75 User Guide
Roberts Radio Radio RD 15 User Guide
Sangean Electronics Clock Radio WR5 User Guide
Sanyo Car Satellite TV System DP42647 User Guide
Schneider Electric Webcam C3419M D 11 08 User Guide
Schumacher Power Supply 00 99 000867 0109 User Guide
Seagate Brush Cutter ST3146707LW LC User Guide
Sears Lawn Mower 91725049 User Guide
Sennheiser Car Satellite Radio System AC 3000 User Guide