PYLE Audio Stereo Amplifier PLA 4300D User Guide

P L A - 2 1 9

P L A -2 15 0

P L A -2 2 5 0 P L A -2 3 5 0

P L A -2 4 5 0 P L A -2 5 5 0

P L A -2 6 5 0 P L A -2 7 5 0

P L A -2 8 5 0

Two Cha nne l High

P e r for m a nc e P owe r Am plifie r

P L A - 4 1 9

P L A -4 15 0

P L A -4 2 5 0 P L A -4 3 5 0

P e r for m a nc e P owe r Am plifie r

Four Cha nne l High

P L A -4 3 0 0 D

Cla s s -D Mono Block P owe r Am plifie r

Download from Www.Somanuals.com. All Manuals Search And Download.

ta b le o f c o n te n ts

2 / 4 c h a n n e l in p u t c o n n e c tio n s

g e n e ra l fe a tu re s

2-6

24-25

P LA -4 19

fe a tu re s a n d s p e c ific a tio n s

h ig h le v e l in p u t c o n n e c tio n s

7-8

9-10

11-14

P LA -2 19

P LA -4 19

P LA -4 15 0 / P LA -4 2 5 0 / P LA -4 3 5 0

P LA -2 15 0 / P LA -2 2 5 0 / P LA -2 3 5 0

P LA -2 4 5 0 / P LA -2 5 5 0 / P LA -2 6 5 0

P LA -2 7 5 0 / P LA -2 8 5 0

m o n o in p u t c o n n e c tio n s

P LA -4 15 0 / P LA -4 2 5 0 / P LA -4 3 5 0

h ig h le v e l m o n o in p u t c o n n e c tio n s

15-16

17-18

P LA -4 15 0 / P LA -4 2 5 0 / P LA -4 3 5 0

P LA -4 3 0 0 D

e le c tric a l c o n n e c tio n s

s y s te m w irin g

P LA -4 3 0 0 D

P LA -2 19 / P LA -4 19 / P LA -2 15 0 / P LA -2 2 5 0 19-20

P LA -2 3 5 0 / P LA -2 4 5 0 / P LA -2 5 5 0

P LA -2 6 5 0 / P LA -2 7 5 0 / P LA -2 8 5 0

P LA -4 15 0 / P LA -4 2 5 0 / P LA -4 3 5 0

P LA -4 3 0 0 D

s p e a k e r c o n n e c tio n s

P LA -2 15 0 / P LA -2 2 5 0 / P LA -2 3 5 0

P LA -2 4 5 0 / P LA -2 5 5 0 / P LA -2 6 5 0

P LA -2 7 5 0 / P LA -2 8 5 0

s te re o in p u t c o n n e c tio n s

s p e a k e r c o n n e c tio n s

P LA -2 19 / P LA -2 15 0 / P LA -2 2 5 0 / P LA -2 3 5 0

P LA -2 4 5 0 / P LA -2 5 5 0 / P LA -2 6 5 0

P LA -2 7 5 0 / P LA -2 8 5 0

21-22

32-33

P LA -4 19 / P LA -4 15 0

P LA -4 2 5 0 / P LA -4 3 5 0

m o n o in p u t c o n n e c tio n s

m o u n tin g a n d in s ta lla tio n

P LA -2 15 0 / P LA -2 2 5 0 / P LA -2 3 5 0

P LA -2 4 5 0 / P LA -2 5 5 0 / P LA -2 6 5 0

P LA -2 7 5 0 / P LA -2 8 5 0

p ro te c tio n c irc u itry a n d tro u b le s h o o tin g 35

p re c a u tio n s

Download from Www.Somanuals.com. All Manuals Search And Download.

g e n e ra l fe a tu re s

PLA-219

PLA-419

PLA-2150

High Performance 240 Watt 2 Channel Amplifier

High Performance

00 Watt

Channel Amplifier

High Performance 600 Watt 2 Channel

Bridgeable MOSFET Amplifier

· 120 Watts x 2 Output

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· Gold Plated RCA Inputs

· High Level MOLEX Input

· Power ON LED Indicator

· S/N Ratio: > 95 dB

· 100 Watts x 4 Output

· 300 Watts x 2 Output

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· Gold Plated RCA Inputs

· High Level MOLEX Input

· Power ON LED Indicator

· S/N Ratio: > 95 dB

· 600 Watts x 1 Bridged Output

· Variable Hi/Lo Electronic Crossover Network

· Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· Gold Plated RCA Inputs

· High Level MOLEX Input

· Power ON LED Indicator

· LED Protection Indicator

· S/N Ratio: > 95 dB

· THD: <0.04%

· Thermal Protection

· Overload Protection

· Short Circuit Protection

· Anti-Thump Turn-On

· Overload Protection

· Short Circuit Protection

· Anti-Thump Turn-On

· THD: <0.04%

· Thermal Protection

· Overload Protection

· Short Circuit Protection

· Anti-Thump Turn-On

Download from Www.Somanuals.com. All Manuals Search And Download.

g e n e ra l fe a tu re s

PLA-2250 PLA-2350 PLA-2450

High Performance 1000 Watt 2 Channel

Bridgeable MOSFET Amplifier

High Performance 1200 Watt 2 Channel

Bridgeable MOSFET Amplifier

High Performance 1400 Watt 2 Channel

Bridgeable MOSFET Amplifier

· 500 Watts x 2 Output

· 600 Watts x 2 Output

· 700 Watts x 2 Output

· 1000W x 1 Bridged Output

· Variable Hi/Lo Electronic Crossover Network

· Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· 1200W x 1 Bridged Output

· Variable Hi/Lo Electronic Crossover Network

· Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· 1400W x 1 Bridged Output

· Variable Hi/Lo Electronic Crossover Network

· Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· Gold Plated RCA Inputs

· High Level MOLEX Inputs

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· Gold Plated RCA Inputs

· High Level MOLEX Inputs

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· Gold Plated RCA Inputs

· High Level MOLEX Inputs

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· S/N Ratio: > 95 dB

· THD: <0.04%

· Thermal Protection

· Overload Protection

· Short Circuit Protection

· Anti-Thump Turn-On

· Short Circuit Protection

· Anti-Thump Turn-On

· Short Circuit Protection

· Anti-Thump Turn-On

Download from Www.Somanuals.com. All Manuals Search And Download.

g e n e ra l fe a tu re s

PLA-2550 PLA-2650 PLA-2750

High Performance 1600 Watt

Bridgeable MOSFET Amplifier

Channel

High Performance 1800 Watt 2 Channel

Bridgeable MOSFET Amplifier

High Performance 2

00 Watt

Channel

Bridgeable MOSFET Amplifier

· 800 Watts x 2 Output

· 900 Watts x 2 Output

· 1200 Watts x 2 Output

· 1600 Watts x 1 Bridged Output

· Variable Hi/Lo Electronic Crossover Network

· Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· 1800 Watts x 1 Bridged Output

· Variable Hi/Lo Electronic Crossover Network

· Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· 2400 Watts x 1 Bridged Output

· Variable Hi/Lo Electronic Crossover Network

· Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· Gold Plated RCA Inputs

· High Level MOLEX Input

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· Gold Plated RCA Inputs

· High Level MOLEX Input

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· Gold Plated RCA Inputs

· High Level MOLEX Input

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· S/N Ratio: > 95 dB

· THD: <0.04%

· Thermal Protection

· Overload Protection

· Short Circuit Protection

· Anti-Thump Turn-On

· Short Circuit Protection

· Anti-Thump Turn-On

· Short Circuit Protection

· Anti-Thump Turn-On

Download from Www.Somanuals.com. All Manuals Search And Download.

g e n e ra l fe a tu re s

PLA-2850 PLA-4150 PLA-4250

High Performance 4000 Watt 2 Channel

Bridgeable MOSFET Amplifier

High Performance 1000 Watt

Bridgeable MOSFET Amplifier

Channel

High Performance 1400 Watt

Bridgeable MOSFET Amplifier

Channel

· 2000 Watts x 2 Output

· 250 Watts x 4 Output

· 350 Watts x 4 Output

· 4000 Watts x 1 Bridged Output

· Variable Hi/Lo Electronic Crossover Network

· Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· 500 Watts x 2 Bridged Output (250Wx2+500Wx1)

· Dual Variable Hi/Lo Electronic Crossover Network

· Dual Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· 700 Watts x 2 Bridged Output (350Wx2+700Wx1)

· Dual Variable Hi/Lo Electronic Crossover Network

· Dual Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· Gold Plated RCA Inputs

· High Level MOLEX Input

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· Gold Plated RCA Inputs

· High Level MOLEX Input

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· Power ON LED Indicator

· LED Protection Indicator

· S/N Ratio: > 95 dB

· THD: <0.04%

· S/N Ratio: > 95 dB

· THD: <0.04%

· Thermal Protection

· THD: <0.04%

· Thermal Protection

· Overload Protection

· Thermal Protection

· Overload Protection

· Short Circuit Protection

· Overload Protection

· Short Circuit Protection

· Anti-Thump Turn-On

· Short Circuit Protection

· Tri-Mode Configurable

· Anti-Thump Turn-On

· Tri-Mode Configurable

Download from Www.Somanuals.com. All Manuals Search And Download.

g e n e ra l fe a tu re s

PLA-4350 PLA-430 0 D

High Performance 2000 Watt 4 Channel

Bridgeable MOSFET Amplifier

4000W Mono Block MOSFET Amplifier

· 500 Watts x 4 Output

· Mono Block Subwoofer Amplifier

· 1 Ohm Stable

· 1000W x 2 Bridged Output (500W x 2+1000W x 1)

· Dual Variable Hi/Lo Electronic Crossover Network

· Dual Variable Bass Boost (0 - +18 dB @ 60Hz)

· Variable Input Level (Gain) Control

· Remote Turn On/Off

· MOSFET Power Supply

· PWM (Pulse-Width-Modulation) System

· Glass Epoxy PCB

· Gold Plated RCA Inputs for Line Input & Bypass Output.

· Gold Plated Terminals for Speaker Output and Power Input.

· Thermal, Overload and Short Protection

· Variable Sub-sonic Filter (15Hz~40Hz, 24dB/Octave)

· Variable Low-pass Filter (20Hz~250Hz, 24dB/Octave)

· Phase Control 0-180 degree

· Gold Plated RCA Inputs

· High Level MOLEX Inputs

· Power ON LED Indicator

· LED Protection Indicator

· Remote Bass Boost

· S/N Ratio: > 95 dB

· Remote Bass Control

· THD: <0.04%

· Input Impedance : 10K Ohms

· Thermal Protection

· Soft Turn On/Off

· Overload Protection

· Advanced Protection Circuitry

· Short Circuit Protection

· S/N Ratio:>90dB

· Anti-Thump Turn-On

· Heavy Duty Power Coated Heatsink

· Tri-Mode Configurable

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d c o n tro ls

2 c h a m p P L A -2 19

P LA -2 19

high level inputs

low level inputs

input level control

power LED

power terminals

power fuse

speaker connections

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d s p e c ific a tio n s

2 c h a m p P L A -2 19

input level control use this control to match the outputs of your head unit to the amplifier.

output power @ 14.4v DC, 1KHz

Starting with your head unit set at about the 2 o’clock position, increase

the amp level control until distortion begins to occur, and reduce slightly

from this point.

RMS Power @ 4 Ohms

Maximum Power Output

30 Watts x 2

120 Watts x 2

low level inputs this amp features gold-plated RCA input jacks for high impedance input.

frequency response

input impedance

15 Hz-30 KHz

Use these with car stereo output which uses RCA-type connector cables.

high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker

output leads to these input connectors.

low level inputs

high level inputs

10K Ohms

100 Ohms

power LED this indicator is illuminated when power is applied.

input sensitivity

low level inputs

high level inputs

power fuse the fuse protects the amplifier and your car’s electrical system from short

circuit conditions.

250mV

2.5V

power terminals use these connectors to deliver power, ground and remote turn-on control

to the amplifier.

power supply voltage

14.4V DC Neg. Ground (10.5-16V)

speaker connections these terminals are 14K gold plated to guarantee high conductivity and

minimum signal loss.

matching speaker impedance

stereo mode

bridged mode

2-4 Ohms

maximum current draw

dimensions (W x H x L)

inches

281 x 59 x 209

11.06 x 2.32 x 8.25

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d c o n tro ls

4 c h a m p P L A -4 19

P LA -4 19

power LED

high level inputs

low level inputs

input level control

high level inputs

low level inputs

input level control

power terminals

power fuse

speaker connections

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d s p e c ific a tio n s

4 c h a m p P L A -4 19

input level control use this control to match the outputs of your head unit to the amplifier.

output power @ 14.4v DC, 1KHz

Starting with your head unit set at about the 2 o’clock position, increase

the amp level control until distortion begins to occur, and reduce slightly

from this point.

RMS Power @ 4 Ohms

Maximum Power Output

30 Watts x 4

100 Watts x 4

low level inputs this amp features gold-plated RCA input jacks for high impedance input.

frequency response

input impedance

15 Hz-30 KHz

Use these with car stereo output which uses RCA-type connector cables.

high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker

output leads to these input connectors.

low level inputs

high level inputs

10K Ohms

100 Ohms

power LED this indicator is illuminated when power is applied.

input sensitivity

low level inputs

high level inputs

power fuse the fuse protects the amplifier and your car’s electrical system from short

circuit conditions.

250mV

2.5V

power terminals use these connectors to deliver power, ground and remote turn-on control

to the amplifier.

power supply voltage

14.4V DC Neg. Ground (10.5-16V)

speaker connections these terminals are 14K gold plated to guarantee high conductivity and

minimum signal loss.

matching speaker impedance

stereo mode

bridged mode

2-4 Ohms

10A

maximum current draw

dimensions (W x H x L)

inches

281 x 59 x 235

11.06 x 2.32 x 9.25

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d c o n tro ls

2 c h a m p P L A -2 15 0 • P L A -2 2 5 0

P L A -2 3 5 0 • P L A -2 4 5 0

P LA -2 15 0

P LA -2 2 5 0

P LA -2 3 5 0

P LA -2 4 5 0

power LED

protection LED

Remote Bass Boost

(PLA-2150 Without )

high pass frequency control

low pass frequency control

high level inputs

low level inputs

input level control

bass boost level

crossover mode selector

power terminals

power fuse

speaker connections

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d s p e c ific a tio n s

2 c h a m p P L A -2 15 0 • P L A -2 2 5 0

P L A -2 3 5 0 • P L A -2 4 5 0

output power @ 14.4v DC, 1KHz PLA-2150

PLA-2250

75 Watts x 2

125 Watts x 2 125 Watts x 2 175 Watts x 2

500 Watts x 2 600 Watts x 2 700 Watts x 2

PLA-2350

75 Watts x 2 100 Watts x 2

PLA-2450

crossover mode selector when used with normal, full range systems, set this switch to “FULL.” If

you wish to use the internal crossover to power a driver of specific frequency

range, use the “LOWPASS” or “HIGHPASS” settings.

RMS Power @ 4 Ohms 40 Watts x 2

RMS Power @ 2 Ohms 60 Watts x 2

Maximum Power Output 300 Watts x 2

input level control use this control to match the outputs of your head unit to the amplifier.

Starting with your head unit set at about the 2 o’clock position, increase

the amp level control until distortion begins to occur, and reduce slightly

from this point.

frequency response

input impedance

15 Hz-30 KHz

low pass frequency control when the crossover selector switch is in “low pass” mode, this control

low level inputs

high level inputs

10K Ohms

100 Ohms

sets the upper frequency limit for audio program sent to the speakers.

high pass frequency control when the crossover selector switch is in “high pass” mode, this control

input sensitivity

low level inputs

high level inputs

sets the lower frequency limit for audio program sent to the speakers.

250mV

2.5V

Remote Bass Boost

Plug in the Remote Bass Boost Control wire in here.(PLA-2150 without)

bass boost level control this control permits adjustment of the bass level up to an increase of

approximately 18 dB.

power supply voltage

14.4V DC Neg. Ground (10.5-16V)

low level inputs this amp features gold-plated RCA input jacks for high impedance input.

matching speaker impedance

Use these with car stereo output which uses RCA-type connector cables.

stereo mode

bridged mode

2-4 Ohms

4-8 Ohms

high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker

output leads to these input connectors.

15A

20A

30A

maximum current draw

dimensions (W x H x L)

power LED this indicator is illuminated when power is applied.

protection LED this indicator is illuminated when built-in protection circuitry is activated.

inches

281 x 59 x 209

281 x 59 x 280

281 x 59 x 305

281 x 59 x 343

power fuse the fuse protects the amplifier and your car’s electrical system from short

11.06 x 2.32 x 8.25 11.06 x 2.32 x 11 11.06 x 2.32 x 12 11.06 x 2.32 x 13.5

circuit conditions.

power terminals use these connectors to deliver power, ground and remote turn-on control

to the amplifier.

speaker connections these terminals are 14K gold plated to guarantee high conductivity and

minimum signal loss.

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d c o n tro ls

2 c h a m p P L A -2 5 5 0 • P L A -2 6 5 0

P L A -2 7 5 0 • P L A -2 8 5 0

power LED

P LA -2 5 5 0

P LA -2 6 5 0

P LA -2 7 5 0

P LA -2 8 5 0

protection LED

Remote Bass Boost

high pass frequency control

low pass frequency control

high level inputs

low level inputs

bass boost level

crossover mode selector

input level control

power terminals

power fuse

speaker connections

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d s p e c ific a tio n s

2 c h a m p P L A -2 5 5 0 • P L A -2 6 5 0

P L A -2 7 5 0 • P L A -2 8 5 0

crossover mode selectors when used with normal, full range systems, set these switches to “FULL.”

If you wish to use the internal crossovers to power a driver of specific

output power @ 14.4v DC, 1KHz PLA-2550

PLA-2650

PLA-2750

PLA-2850

frequency range, use the “LOWPASS” or “HIGHPASS” settings.

RMS Power @ 4 Ohms 125 Watts x 2 150 Watts x 2 200 Watts x 2 300 Watts x 2

RMS Power @ 2 Ohms 200 Watts x 2 225 Watts x 2 290 Watts x 2 450 Watts x 2

Maximum Power Output 800 Watts x 2 900 Watts x 2 1200 Watts x 2 2000 Watts x 2

input level controls use these controls to match the outputs of your head unit to the amplifier.

Starting with your head unit set at about the 2 o’clock position, increase

the amp level controls until distortion begins to occur, and reduce slightly

from this point.

frequency response

input impedance

15 Hz-30 KHz

low pass frequency controls when one or both of the crossover selector switches is in “low pass”

mode, one can set the upper frequency limit for audio program sent to

the speakers.

low level inputs

high level inputs

10K Ohms

100 Ohms

high pass frequency controls when the one or both of crossover selector switch is in “high pass” mode,

one can set the lower frequency limit for audio program sent to the

speakers.

input sensitivity

low level inputs

high level inputs

250mV

2.5V

Remote Bass Boost

Plug in the Remote Bass Boost Control wire in here.

bass boost level controls this control permits adjustment of the bass level up to an increase of

power supply voltage

14.4V DC Neg. Ground (10.5-16V)

approximately 18 dB in either or both pairs of channels.

matching speaker impedance

low level inputs this amp features gold-plated RCA input jacks for high impedance input.

2-4 Ohms

4-8 Ohms

Use these with car stereo output which uses RCA-type connector cables.

stereo mode

bridged mode

high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker

output leads to these input connectors.

maximum current draw

20 A

20 A x 2

25 A x 2

30 A x 2

power LED this indicator is illuminated when power is applied.

dimensions (W x H x L)

protection LED this indicator is illuminated when built-in protection circuitry is activated.

inches

281 x 59 x 381

281 x 59 x 432

281 x 59 x 482

281 x 59 x 532

11.06 x 2.32 x 15 11.06 x 2.32 x 17 11.06 x 2.32 x 19 11.06 x 2.32 x 21

power fuse the fuse protects the amplifier and your car’s electrical system from short

circuit conditions.

power terminals use these connectors to deliver power, ground and remote turn-on control

to the amplifier.

speaker connections these terminals are 14K gold plated to guarantee high conductivity and

minimum signal loss.

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d c o n tro ls

4 c h a m p P L A -4 15 0 • P L A -4 2 5 0 • P L A -4 3 5 0

Remote Bass Boost

P LA -4 15 0

P LA -4 2 5 0

P LA -4 3 5 0

(PLA-4150 without)

ch 1/2 input level control

ch 1/2 high level inputs

ch 3/4 input level control

ch 3/4 high level inputs

ch 3/4 low level inputs

ch 1/2 low level inputs

ch 3/4 crossover mode selector switch

ch 3/4 bass boost level control

ch 3/4 low pass frequency control

ch 3/4 high pass frequency control

ch 1/2 crossover mode selector switch

ch 1/2 bass boost level control

ch 1/2 low pass frequency control

ch 1/2 high pass frequency control

power LED

protection LED

power terminals

power fuse

speaker connections

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d s p e c ific a tio n s

4 c h a m p P L A -4 15 0 • P L A -4 2 5 0 • P L A -4 3 5 0

dual crossover mode selectors when used with normal, full range systems, set these switches to “FULL.”

If you wish to use the internal crossovers to power a driver of specific

output power @ 14.4v DC, 1KHz PLA-4150

PLA-4250

PLA-4350

frequency range, use the “LOWPASS” or “HIGHPASS” settings.

RMS Power @ 4 Ohms 35 Watts x 4

RMS Power @ 2 Ohms 55 Watts x 4

Maximum Power Output 250 Watts x 4

50 Watts x 4

75 Watts x 4

350 Watts x 4

75 Watts x 4

115 Watts x 4

500 Watts x 4

dual input level controls use these controls to match the outputs of your head unit to the amplifier.

Starting with your head unit set at about the 2 o’clock position, increase

the amp level controls until distortion begins to occur, and reduce slightly

from this point.

frequency response

input impedance

15 Hz-30 KHz

dual low pass frequency controls when one or both of the crossover selector switches is in “low pass”

mode, one can set the upper frequency limit for audio program sent to

the speakers.

low level inputs

high level inputs

10K Ohms

100 Ohms

dual high pass frequency controls when the one or both of crossover selector switch is in “high pass” mode,

one can set the lower frequency limit for audio program sent to the

speakers.

input sensitivity

low level inputs

high level inputs

250mV

2.5V

CH 3/4 Remote Bass Boost

Plug in the Remote Bass Boost Control wire in here.(PLA-4150 without)

dual bass boost level controls this control permits adjustment of the bass level up to an increase of

power supply voltage

14.4V DC Neg. Ground (10.5-16V)

approximately 18 dB in either or both pairs of channels.

matching speaker impedance

low level inputs this amp features gold-plated RCA input jacks for high impedance input.

2-4 Ohms

4-8 Ohms

Use these with car stereo output which uses RCA-type connector cables.

stereo mode

bridged mode

high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker

output leads to these input connectors.

maximum current draw

dimensions (W x H x L)

20 A

30 A

20 A x 2

power LED this indicator is illuminated when power is applied.

protection LED this indicator is illuminated when built-in protection circuitry is activated.

inches

281 x 59 x 305

281 x 59 x 381

281 x 59 x 432

11.06 x 2.32 x 12 11.06 x 2.32 x 15 11.06 x 2.32 x 17

power fuse the fuse protects the amplifier and your car’s electrical system from short

circuit conditions.

power terminals use these connectors to deliver power, ground and remote turn-on control

to the amplifier.

speaker connections these terminals are 14K gold plated to guarantee high conductivity and

minimum signal loss.

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d c o n tro ls

Cla s s -D M O NO B L O CK A M P L IF IE R P L A -4 3 0 0 D

power LED

protection LED

P LA -4 3 0 0 D

line level outputs

line level inputs

remote bass boost

input level control

sub sonic control

phase shift switch

low pass frequency control

speaker connections

power fuse

power terminals

Download from Www.Somanuals.com. All Manuals Search And Download.

fe a tu re s a n d s p e c ific a tio n s

Cla s s -D M O NO B L O CK A M P L IF IE R P L A -4 3 0 0 D

Class-D design Low-frequency information for subwoofer only.High efficient power

output power @ 14.4v DC, 50Hz

PLA-4300D

RMS Power at @ 4 Ohms

RMS Power at @ 2 Ohms

RMS Power at @ 1.3 Ohms

Maximum Power Output

400W MONO

700W MONO

1200W MONO

4000W MONO

power supplies Stiffly regulated PWM power supplies. MOSFET switches maintain

rated power over a wide range of battery voltages.

crossover low pass filter Adjustable from 20Hz to 250Hz with a slope of 24dB per octave.This

allows for the adjustment of the upper point of the frequency bandwidth

and the respective subwoofer.

frequency response

input impedance

input sensitivity

power supply voltage

min speaker lmpedance

T.H.D

20 Hz-250 Hz (

3dB)

high pass subsonic filter Adjustable from 15Hz to 40Hz with a slope of 24dB per octave.This allows

for the attenuation of frequencies that are mostly inaudible and cause

unnecessary strain on the amplifier.

10K Ohms

250mV~4V Adjustable

protection circuitry Protection against thermal, overload and short circuit conditions.

14.4V DC Neg. Ground (10.5-16V)

remote dash-mount gain control This amplifier come complete with a compact remote GAIN CONTROLLER

1 Ohm

0.1%

which can be conveniently mounted on or under the dashboard of your

car.

S/N ration

>90dB

40A x 2

fuse

dimensions (W x H x L)

inches

281 x 59 x 381

11.06 x 2.32 x 15

Download from Www.Somanuals.com. All Manuals Search And Download.

e le c tric a l c o n n e c tio n s

2 c h a m p P L A -2 19 • P L A -2 15 0 • P L A -2 2 5 0 • P L A -2 3 5 0

P L A -2 4 5 0 • P L A -2 5 5 0 • P L A -2 6 5 0 • P L A -2 7 5 0

P L A -2 8 5 0 • P L A -4 3 0 0 D

P LA -2 19

P LA -2 15 0

P LA -2 2 5 0

P LA -2 3 5 0

P LA -2 4 5 0

P LA -2 5 5 0

P LA -2 6 5 0

P LA -2 7 5 0

P LA -2 8 5 0

P LA -4 3 0 0 D

12V battery

head unit

to remote turn-on

+12V

Download from Www.Somanuals.com. All Manuals Search And Download.

e le c tric a l c o n n e c tio n s

4 c h a m p P L A -4 19 • P L A -4 15 0

P L A -4 2 5 0 • P L A -4 3 5 0

P LA -4 19

P LA -4 15 0

P LA -4 2 5 0

P LA -4 3 5 0

12V battery

head unit

to remote turn-on

+12V

Download from Www.Somanuals.com. All Manuals Search And Download.

s te re o in p u t c o n n e c tio n s

2 c h a m p P L A -2 19

using low level inputs

P LA -2 1 9

head unit

L/R Audio

Outputs

PLEASE NOTE! If using high level

inputs, do not use the low level RCA

inputs at the same time!

using high level inputs

head unit

wiring harness

from speaker terminals

Download from Www.Somanuals.com. All Manuals Search And Download.

s te re o in p u t c o n n e c tio n s

2 c h a m p • P L A -2 15 0 • P L A -2 2 5 0 • P L A -2 3 5 0

P L A -2 4 5 0 • P L A -2 5 5 0 • P L A -2 6 5 0

P L A -2 7 5 0 • P L A -2 8 5 0

using low level inputs

using high level inputs

P LA -2 15 0

P LA -2 2 5 0

P LA -2 3 5 0

P LA -2 4 5 0

P LA -2 5 5 0

P LA -2 6 5 0

P LA -2 7 5 0

P LA -2 8 5 0

head unit

L/R Audio

Outputs

PLEASE NOTE! If using high level

inputs, do not use the low level RCA

inputs at the same time!

head unit

from speaker terminals

Download from Www.Somanuals.com. All Manuals Search And Download.

m o n o in p u t c o n n e c tio n s

2 c h a m p • P L A -2 15 0 • P L A -2 2 5 0 • P L A -2 3 5 0

P L A -2 4 5 0 • P L A -2 5 5 0 • P L A -2 6 5 0

P L A -2 7 5 0 • P L A -2 8 5 0

using low level inputs

P LA -2 15 0

P LA -2 2 5 0

P LA -2 3 5 0

P LA -2 4 5 0

P LA -2 5 5 0

P LA -2 6 5 0

P LA -2 7 5 0

P LA -2 8 5 0

head unit

To a second amplifier

Y Adaptors

PLEASE NOTE! If using high level

inputs, do not use the low level RCA

inputs at the same time!

using high level inputs

head unit

To a second amplifier

wiring harness

from speaker terminals

Download from Www.Somanuals.com. All Manuals Search And Download.

2 / 4 c h a n n e l in p u t c o n n e c tio n s

4 c h a m p P L A -4 19

4 CH input connections using low level inputs

P LA -4 1 9

head unit

L/R FRONT

Audio Outputs

L/R REAR

Audio Outputs

2 CH input connections using low level inputs

Y adaptors

Download from Www.Somanuals.com. All Manuals Search And Download.

h ig h le v e l in p u t c o n n e c tio n s

4 c h a m p P L A -4 19

4 CH floating ground connections

P LA -4 1 9

4 CH harness wiring for common ground connections

CH 3/4

CH 1/2

REAR

R FRONT

ORANGE

REAR

R FRONT

BLACK

ORANGE

BLACK

ORANGE

from speaker terminals

BLACK

ORANGE

BLACK

PLEASE NOTE! If using high level inputs,

do not use the low level RCA inputs at

the same time!

ORANGE

from speaker terminals

Download from Www.Somanuals.com. All Manuals Search And Download.

S te re o in p u t c o n n e c tio n s

4 c h a m p P L A -4 15 0 • P L A -4 2 5 0 • P L A -4 3 5 0

4 CH Stereo input connections using low level inputs

P LA -4 15 0

P LA -4 2 5 0

P LA -4 3 5 0

head unit

L/R FRONT

Audio Outputs

L/R REAR

Audio Outputs

2 CH Stereo input connections using low level inputs

Y adaptors

Download from Www.Somanuals.com. All Manuals Search And Download.

h ig h le v e l S te re o in p u t c o n n e c tio n s

4 c h a m p P L A -4 15 0 • P L A -4 2 5 0 • P L A -4 3 5 0

4 CH floating ground connections

P LA -4 15 0

P LA -4 2 5 0

P LA -4 3 5 0

4 CH harness wiring for common ground connections

CH 3/4

CH 1/2

REAR

R FRONT

ORANGE

REAR

R FRONT

BLACK

ORANGE

BLACK

ORANGE

from speaker terminals

BLACK

ORANGE

BLACK

PLEASE NOTE! If using high level inputs,

do not use the low level RCA inputs at

the same time!

ORANGE

from speaker terminals

Download from Www.Somanuals.com. All Manuals Search And Download.

m o n o in p u t c o n n e c tio n s

4 c h a m p P L A -4 15 0 • P L A -4 2 5 0 • P L A -4 3 5 0

4 CH mono input connections using low level inputs

P LA -4 15 0

P LA -4 2 5 0

P LA -4 3 5 0

head unit

LEFT FRONT Audio Outputs

LEFT REAR Audio Outputs

RIGHT FRONT Audio Outputs

RIGHT REAR Audio Outputs

2 CH mono input connections using low level inputs

Y adaptors

Download from Www.Somanuals.com. All Manuals Search And Download.

h ig h le v e l m o n o in p u t c o n n e c tio n s

4 c h a m p P L A -4 15 0 • P L A -4 2 5 0 • P L A -4 3 5 0

4 CH floating ground connections

P LA -4 15 0

P LA -4 2 5 0

P LA -4 3 5 0

4 CH harness wiring

for common ground connections

CH 3/4

CH 1/2

ORANGE

BLACK

ORANGE

BLACK

ORANGE

BLACK

ORANGE

BLACK

from speaker terminals

PLEASE NOTE! If using high level inputs,

do not use the low level RCA inputs at

the same time!

BLACK

ORANGE

from speaker terminals

Download from Www.Somanuals.com. All Manuals Search And Download.

s y s te m w irin g

Cla s s -D M ONO BLOCK A M P LIF IE R P LA -4 3 0 0 D

P LA -4 3 0 0 D

TO SATELLITE AMPLIFIER

LINE INPUT

L/R Audio

Outputs

head unit

SPEAKER OUTPUT CONNECTION

MINIMUM

SPEAKER

IMPEDANCE

2~ 4 OHMS!

subwoofer

Download from Www.Somanuals.com. All Manuals Search And Download.

s p e a k e r c o n n e c tio n s

2 c h a m p P L A -2 19 • P L A -2 15 0 • P L A -2 2 5 0 • P L A -2 3 5 0

P L A -2 4 5 0 • P L A -2 5 5 0 • P L A -2 6 5 0 • P L A -2 7 5 0

P L A -2 8 5 0

Stereo Output Mode

P LA -2 19

P LA -2 15 0

P LA -2 2 5 0

P LA -2 3 5 0

P LA -2 4 5 0

P LA -2 5 5 0

P LA -2 6 5 0

P LA -2 7 5 0

P LA -2 8 5 0

Bridged Mono Output Mode (PLA-219 WITHOUT)

LEFT speaker

RIGHT speaker

MINIMUM

SPEAKER

IMPEDANCE

4 OHMS!

speaker

Download from Www.Somanuals.com. All Manuals Search And Download.

s p e a k e r c o n n e c tio n s

4 c h a m p P L A -4 19 • P L A -4 15 0

P L A -4 2 5 0 • P L A -4 3 5 0

4 CH Output Mode

P LA -4 1 9

P LA -4 15 0

P LA -4 2 5 0

P LA -4 3 5 0

FRONT speakers

REAR speakers

Bridged Dual Mono Output Mode (PLA-419 WITHOUT)

MINIMUM

SPEAKER

IMPEDANCE

4 OHMS!

speakers

Download from Www.Somanuals.com. All Manuals Search And Download.

s p e a k e r c o n n e c tio n s

4 c h a m p P L A -4 15 0 • P L A -4 2 5 0 • P L A -4 3 5 0

2 5

P LA -4 3 5 0

2 CH Bridged Output Mode with Subwoofer Output

MINIMUM

SPEAKER

IMPEDANCE

4 OHMS!

SPEAKERS

SUBWOOFER

Download from Www.Somanuals.com. All Manuals Search And Download.

m o u n tin g a n d in s ta lla tio n

mo un tin g

Your new Pyle GearX Series amplifier comes complete with all required mounting hardware. When determining a suitable location in your vehicle for the amp, please remember

that it is a high-power electronic device capable of generating high heat.

For this reason, always choose a location in your vehicle which has low vibration, adequate ventilation, a minimum of dust, and no moisture. Be sure to

mount the amp in such a manner as to allow reasonable airflow over the cooling fins.

Mark the location for the mounting screw holes by positioning the amp where you wish to install it and use a scribe (or one of the mounting screws) inserted in each

of the mounting holes to mark the mounting surface. If the mounting surface is carpeted, measure the hole centers and mark with a felt tip pen.

Before attempting to drill the mounting holes, take note of any wires, lines or other devices in your vehicle which may be located behind the mounting

surface! Then drill pilot holes in the mounting surface for the mounting screws and insert them. Tighten the screws securely.

wirin g tip s

When making electrical connections to your amplifier, please observe the

following:

Use at least 8 gauge wire for power and ground connections.

Wire the amplifier directly to the car battery.

For the ground connection, use the shortest possible wire to a good chassis ground point.

fu^Ws^{ire t}e^{he Re}s^{mote connection to the auto start lead of your head unit, equalizer or power antenna.}

About power fuses:

Pyle GearX Series amplifiers feature built-in fuse systems. These fuses protect both the amplifier

and the electrical system in your vehicle from fault conditions. If you ever need to replace the

fuse in your Pyle GearX Series amp, use a fuse of exactly the same type and rating. A different

type or rating of fuse may result in damage or fire.

Download from Www.Somanuals.com. All Manuals Search And Download.

tro u b le s h o o tin g

No output.

Confirm that all terminal strip connections are secure and tight.

p ro te c tio n

c irc u itry

Check both in-line and built-in fuses. Both the +12V and the Remote terminals must have +12v referenced to chassis

ground.

Confirm that the audio signal source (car radio, equalizer, etc.) is connected and is supplying output signal. To

check if the amp is supplying signal, unplug the cables from the signal source (but leave them plugged into the

amp). Briefly tap the center pin of each of the disconnected RCA plugs with your finger. This should produce a noise

(feedback) in your speakers.

The built-in protection circuitry in the Pyle GearX

Series amplifiers will disable the amplifier if it senses

an input overload, a speaker short circuit, or extreme

temperature conditions.

Only one channel works.

When the protection circuit is activated by any of

these conditions, the Protection LED will be

illuminated.

Confirm that all terminal strip connections are secure and tight.

Check the Balance control on the head unit (or other source) to verify that it is set to its midpoint.

If you are using the Low Level RCA input, reverse the input plugs at the amplifier (i.e., switch the L with the R). If

the channels which is silent switches to the other side, the problem is either in the head unit/other source or the

connecting cables.

If this occurs, carefully inspect the system to

determine the source of the problem.

• If the shutdown was a result of a thermal overload

condition, allow the amplifier to cool down before

attempting to restart it.

Weak output.

Readjust the Input Level Control(s) to better suit the input signal.

Noise in the audio.

If the noise is a “whine” whose pitch follows the engine speed, confirm that the amplifier and any other signal

sources (head unit, etc.) are properly grounded.

• If the shutdown was a result of an input overload,

or speaker short circuit, be sure to correct the

condition before restarting.

If the noise is a “clicking” or “popping” noise whose rate follows the engine speed, this usually means that the

vehicle is equipped with resistor spark plugs and wires, or that the ignition is in need of service.

The amplifier can be restarted by turning the remote

power OFF and then ON again.

Check the rounting of the speaker and input wires to make sure they are not adjacent to wires which interconnect

lights and other accessories.

If the above steps fail to improve or clear noise interference, the system should be checked by a professional mobile

audio installer.

Download from Www.Somanuals.com. All Manuals Search And Download.

p re c a u tio n s

n o te s

Do not operate the amplifier when it is unmounted.

Attach all audio system components securely within

the automobile to prevent damage, especially in an

accident.

Do not mount this amplifier so that the wire

connections are unprotected, or in a pinched

condition, or likely to be damaged by nearby objects.

Before making or breaking power connections in

your system, disconnect the vehicle battery. Confirm

that your head unit or other equipment is turned off

while connecting the input jacks and speaker

terminals.

If you need to replace the power fuse, do so only

with a fuse identical to that supplied with the amplifier.

Using a fuse of a different type or rating may result

in damage that isn’t covered in the manufacturer’s

warranty.

Download from Www.Somanuals.com. All Manuals Search And Download.

lim ite d w a rra n ty p o lic y

a m p lifie rs

All Pyle products are carefully constructed and thoroughly tested before

You must also include the following items:

• A copy of your sales receipt or other proof of purchase

• A brief letter indicating the problem you are experiencing

• include in your letter your return address, daytime phone number,

and R.A. number

• also include a check or money order for $18.00 for return shipping,

handling, and insurance, or provide your Visa/MC number with

expiration date.

shipment. Products purchased in the USA are warranted to be free of defects

in material and workmanship for two (2) years from the date of purchase. This

warranty is limited to the original retail purchase.

Should the product fail due to factory defects in material or workmanship,

your unit will be repaired or replaced at the sole discretion of Pyle.

To obtain warranty service you must first call our Consumer Return Hotline

number at (718) 236-6948 to obtain a Return Authorization number. This

R.A.# must appear on the outside of your package and on all paperwork

relating to your return.

Our obligation under this warranty is limited to the repair or

replacement of the defective unit when it is returned to us prepaid.

This warranty will be considered void if the unit was tampered with,

improperly serviced, or subject to misuse, neglect, or accidental

damage.

When returning a product to us for warranty service it must be carefully packed

and shipped prepaid to:

R.A.#

Pyle Service Center

1600 63rd Street

Brooklyn, NY 11204

www.pyleaudio.com

Download from Www.Somanuals.com. All Manuals Search And Download.

RCA Microwave Oven RMW1171 User Guide
RCA Projection Television P52926S User Guide
Revolabs Cell Phone FLX2 User Guide
Roland Musical Instrument RD 700 User Guide
Rosewill Video Game Keyboard RK 8200 User Guide
Salton Hot Beverage Maker JK 1199 User Guide
Sanyo Flat Panel Television PDP 32H1ENV User Guide
Scag Power Equipment Lawn Mower STT 35BVAC SS User Guide
Sears Range 91191461 User Guide
Sennheiser Headphones GP 03 M User Guide