PYLE Audio Speaker PLCD95UM User Guide

PLCD95UM  
INSTRUCTION MANUAL  
PWR  
MUTE  
MOD  
ST  
INT  
2
RPT  
3
/
TOP  
1
MO  
-10  
5
RDM  
4
+10  
6
LOUD  
LOC  
DX  
ID3  
BAND  
DISP  
MENU  
VOL+  
SCAN  
SEL  
ENTER  
MENU  
APS  
SEARCH  
MENU  
VOL-  
REMOTE CONTROL  
ANTI-THEFT FLIP DOWN DETACHABLE PANEL  
AUTO-LOADING CD/MP3 COMPACT DISC PLAYER  
AM/FM DIGITAL PLL TUNING RADIO  
WITH ESP FUNCTION &INFRARED REMOTE CONTROLLER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
1. OPEN BUTTON  
Press it to flip down the front panel then you can insert the CD disc into the CD  
compartment .  
2.VOLUME(MENU)+/-KNOB  
Rotate the VOL+/-button to adjust volume level.  
IN MENU MODE: Rotate the vol+ /- button also can adjust the selected mode.  
IN MP3 MODE: Press search button to select track or file search, and then  
press ENTER buttonto enter trackor file searchand using thevol+/- button to  
move track or file search upward or downward.  
3.SEL/MNU(ENTER) BUTTON  
Press SEL button immediately to move display through volume, bass, treble  
and balance functions. Use vol+/-buttton to adjust the select mode. When  
mode has not been adjusted for several seconds, display returns to normal  
radio or cd display.  
VOL BAS TRE  
BAL FAD  
(VOLUME) (BASS) (TREBLE) (BALANCE) (FADER)  
Note:  
During press SEL button if any one of the EQ mode is turned on, LCD display  
only indicate as follows:  
VOL BAS FAD  
(VOLUME) (BASS)  
(FADER)  
A. Adjust volume level by using vol+/- button  
NOTE: The unit is initially set to volume mode.  
B.Press the SEL button to select volume ,bass, treble, balance, fader mode  
than use volume+/ - button to adjust the levelof them.  
NOTE: The fader function controlsbalance between frontor rear speakers  
for four speakers system  
C.Press and hold SEL button for one secondto move displaythrough EQ, ESP,  
MULT, WOOFER(the woofer function forwoofer version only), and BEEP  
functions. When mode has notbeen adjusted forseveral seconds, displayreturn  
to normal radio or cd display.and then use vol+/- button to adjust the selected  
mode as follows:  
FLAT M CLASS M ROCK M POP M DSP OFF  
EQ:  
ESP ’12  
ESP ’45  
ESP:  
MULT:  
MULT ON  
MULT OFF  
WOOFER OFF  
BEEP OFF  
WOOFER ON  
BEEP ON  
WOOFER:  
BEEP:  
D.IN mp3 playback, Used for enter track and file search during MP3 mode after  
press SEARCH buttonduring track search, after selecting thedesired track  
with 1 digit or 2 digits, selected song begins to play after enter button is  
pressed for longer than 0.5 second. During file search, when enter button is  
pressed or longer than 0.5second.at the current directory mode, first song in  
the corresponding director will begin playing.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
4.5.TRACK UP /DOWN BUTTONS  
A.During RADIO mode, press and hold  
auto search channel. Then press  
or  
for more than 2 seconds you can  
,you can have manual search channel.  
or  
B.During CD mode, Press  
previoustrack.Press and hold  
or fast reverse. Releasing the button to stop fast playing  
C.IN MP3 MODE:Press the or button once to choose the next or previous  
or  
button to choose the following track or the  
or button for several secondsto fast forward  
track under normalMP3 playback.  
6. MODE BUTTON  
Press it repeatedly to select CDP, AUX and RADIO mode in sequence and circulation.  
7. LUD  
When reduce volume to half level,press it to enhance the bass effect.  
8.ST BUTTON  
Press ST button to stereo reception for radio stations.  
9.EJECT BUTTON  
Press it to eject the DISC .  
10-11-12-13-14-15. PRESET MEMORY BUTTONS  
A. To memorize the current frequency, press any one of the six preset Buttons hold for  
more than 2 seconds.  
B. To recall the preset memory, press one of the preset buttons [1-6].  
C. In CDP mode, press 1TOP button to pause CDP playing, press it again to resume CDP  
playing. Long press 1 TOP button to select the first track/chapter to play.  
D. In CDP mode, press 2INT button to play the first 10 seconds part of each song, press it  
again to stop scanning and retain playing the song currently selected.  
E. In CDP mode, press 3RPT button to play the current track repeatedly. Press it again to  
cancel this mode.  
F. In CDP mode, press 4RDM button to play the track in random order. Press it again to  
cancel this mode.  
G.In mp3 mode ,press the 5-10/6+10 buttton to select back 10 tracks or next 10 tracks.  
16.MUTE BUTTON  
Press it to eliminate the sound immediately.  
17.DISP BUTTON  
Press DSP button immediately to recall time display, then press and hold this button for  
three seconds until the time is blinking. And rotate VOL+ button to adjust hour or VOL-  
button to adjust minutes.  
18.APS/SEARCH BUTTON  
IN RADIO MODE:  
When short pressing, the radio searches for each preset station.  
When the field strength level is more than the threshold level of stop level, the  
radio is holding at that preset number for few secretary with releasing mute, and  
than searches again. In FM band, FM 1, FM 2 and FM 3 is checked one at a time.  
When long pressing (more than 1 second),the radio searches from the current  
frequency and checks the signal strength level until 1 cycle search is finished.  
And then 6 strongest stations are preset to the corresponding preset number.  
The AS operation is implemented in the each band of selected band. When the  
AS operation is finished, the radio executes the preset scan.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
IN MP3 MODE:  
Press search button for several seconds ,track and file and character search  
becomes possible in the new mode.  
FOR EXAMPLE:  
TRACK SEARCH EXAMPLE  
HOW TO SEARCH FOR TRACK NUMBER 132,TITLED " WXY.MP3"  
A. Press APS/SEARCH button once to go in to search initial mode, it is now  
in TRACK search mode.  
B. Press SEL/menu(ENTER) button to select 1st digit " 1" ,then LCD will shows 001  
and 1st digit " 1" is selected blinking. If ENTER button is pressed again for more  
than 0.5sec,the first song is played.  
C. Then rotate VOL+or VOL- button, then 1st digit will increase according to the  
number of times key is pressed  
D. If LCD shows 002 ,then press ENTER button again the 2nd digit is selected.  
LCD will show " 002" ,with middle 0 digit blinking.  
E. Then rotate VOL + or VOL- button continuously to select 2nd digit to " 3" i.e.,  
" 032" ,with " 3" blinking.  
F. Press ENTER button to select 3rd digit ,i.e," 032" ,with 0 blinking  
(if ENTER buttons is pressed for longer than 0.5sec.,32th song is played)  
G. Rotate VOL+ or VOL - to select 3rd digit to" 1" i.e., " 132" with 1 blinking  
H. Finally press ENTER button, than track number " 132" will play immediately.  
I. VOL+or VOL- button performs to shift 1st digit and 2nd digit to desired track  
(digit) then 3rd digit is shifted form 0-9 as a loop rotation.  
FILE SEARCH EXAMPLE  
NOTE:  
Similar operation as track search, use VOL+ or VOL - button to select directory  
and track number, use ENTER button to confirm selection and/or start playback  
If the structure of Disc above does MP3 TOC, it is follows  
c.MP3  
d.MP3  
DISC  
Total Dir: 4  
dir to have MP3 file 3(A,C,D)  
We regard dir as MP3 file, when operating it is located  
as A A ......  
To listen to a song from MP3(On Normal play)  
A. APS/SEARCH button input (2 times) - file search mode display  
B. SEL/MENU(ENTER) button input -A Dir display  
Total Song: 7  
A
C
a.MP3  
b.MP3  
B
D
e.MP3  
f.MP3  
g.MP3  
C
D
C. SEARCH VOL+orVOL- buttons input(2times) -d dirdisplay. If SEL /MENU  
(ENTER)button is pressedagain for longerthan 0.5sec,first songin d dire file  
will begin playing.  
D.SEL/MENU(ENTER)button input (1 times)  
E.SEARCH VOL+/VOL- buttons input (1 times)  
F. SEL/MENU(ENTER) button input  
-e file display  
-f file display  
-f MP3 File play start  
G.If SEL/MENU(ENTER)button is pressed after SEARCH VOL+/- button is only  
inputted once  
H.NOTE:  
a.This unit can only read MP3 disc in Id3v2.  
b.This model alsohas song name(character) search functionfor MP3 disc  
playback.Press APS/SEARCH button three times until CHAR SCH is shown  
on display thenpress SEL/MENU buttononce, characterA blinks, use  
VOL+/- buttons to select the right character(1letter of desired song name),  
press SEL/MENU buttonto confirm yourchoice and secondcharacter Ablinks  
for you to select, similar operation toenter other letters(max. 5 characters),  
After enteringyour song name,pressSEL/MENU button morethan 1 secondto  
start the search. If no such song, NOT FND will be shown on display.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
19.BAND/ID3:  
During radio mode:Press it to select your desired radio band and the band which  
is selected will be displayed on LCD.  
During mp3 mode :Press search button to working Id3 as follow:  
(depend on the disc used for Mp3)  
File  
folder  
song  
artist  
album  
20.POWER BUTTON  
Press it(more than 1 second) to turn off and short press to turn on the unit.  
21.FLASHING LED  
If the front panel is not on the main unit, LED will be flashing.  
22.RESET  
RESET button is placed on the housing and must be activated with either a  
ballpoint pen or thin metal object. The RESET button is to be activated for the  
following reasons:  
-Initial installation of the unit when all wiring is completed.  
-All the function buttons do not operate.  
-Error symbol on the display.  
Note: If press RESET button, the unit can't work yet, please use a cotton swab  
soaked in isopropyl alcohol to clean the socket on the back of the front panel.  
23.LOC  
When in the radio mode,press it to select local or distance broadcast station  
receive sensitivity .  
24. USB CONNECTOR SOCKET  
When you want to use the USB,first you insert the USB connect line into the USB  
connectorsocket of thefront panel and then insert the USB appliance into the USB  
port to play(See fig.1). (Its operation is similar to the Mp3 operation.)  
When the USB appliance connect to the unit, the system star playing track of  
the USB appliance automatically.  
NOTE:  
To prevent damage to the USB,in the state of the USB playing not to pull out.  
NOTE: The SCAN button on the remote controller(for RC version only)  
SCAN BUTTON  
Press it to scan up by one channel step with station detection. If a valid signal has  
detected, the current frequency is blinked with in 5 seconds, then press it again to stop  
scan and remain the current frequency; otherwise, the unit continue to scan up by one  
channel step with station detection 5 seconds later.  
USB Port  
(USB connect line)  
(Fig.1)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRIC CONNECTION  
WIRING CONNECTION  
AUX cable(optional)  
ANTENNA CONNECTOR  
RCH RED  
LCH WHITE  
IGNITION  
RED  
SWITCH(B+)  
BOX  
YELLOWFUSE  
REAR RCA OUTPUT  
CABLE(optional)  
RCH RED  
LCH WHITE  
MEMORY(B+)  
BLACK  
BLUE  
GROUND(B-)  
AUTO  
ANTENNA  
FRONT  
FRONT  
WHITE  
GREY  
WHITE/BLACK  
GREY/BLACK  
Lch SPK  
REAR  
Rch SPK  
REAR  
GREEN  
VIOLET  
VIOLET/BLACK  
GREEN/BLACK  
Rch SPK  
Lch SPK  
NOTE:  
In spite of having any kinds of speaker system, must use 4 ohms impedance  
of speaker to reduce the distortion during high volume level.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
DASH BOARD  
METAL MOUNTING  
STRAP  
HEX NUT  
SPRING WASHER  
PLAIN WASHER  
TAPPING SCREW  
CONSOLE  
SLIDE BRACKET  
HOUSING  
HEX BOLT  
KEY PLATE  
PLASTIC TRIM OUT  
KEY PLATE  
1.WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST,  
AND MAKE THE DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE  
ON THE UNIT  
2.THAN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE  
3.PUSH IT TO INSTALL THE FRONT  
FRONT PANEL COMPLETELY .  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
CAUTION: DO NOT INSTALLTHE DETACHABLE PANEL BEFORE  
CONNECTING THE WIRE.  
1. The unit is designed for negative terminal of the battery which is connected to the  
vehicle metal. Please confirm it before installation.  
2. If the car interior is extremely hot, as after being parked in the sun, do not use the  
playeruntil the car has been driven for a while to cool off the interior.  
3. Press the OPEN button to flip down the front panel (see fig.1), Slide the guide knob  
to remove the right side first, then take away the front panel. (see fig.2) and put it in the  
protective case (see fig.3) for safe keeping.  
4. Install the front panel back into its bracket and then push it back to the position for  
playing (see fig.4).  
FRONT PANEL  
GUIDE KNOB  
OPEN BUTTON  
(FIG.1)  
(FIG.2)  
PROTECTIVE CASE  
FRONT PANEL  
FRONT PANEL  
(FIG.3)  
(FIG.4)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
DISC PLAY:  
CLEANING DISCS  
Before playing, clean the disc with a clean, lint-free.  
Flip the disc in the direction of the arrow.  
NOTE 1:  
Do not use so solvents such as benzine, thinners. Commercially available  
cleaners or antistatic spray damagethe unit.  
Insert a discwith the labelsurface down. Doingso may damagethe unit.  
NOTE 2:  
Do not try to insert another disc when one has been already inserted.  
Doing so maydamage the unit.  
Handle the disc by its edge. And to keep the disc clean, do not touch the  
surface.  
Do not stickpaper or tapeon the disc.  
Do not exposethe disc todirect sunlight orheat sources suchas hot airducts.  
Or leave it in a car parked in direct sunlight where there can be a considerable  
rise in temperature.  
Label  
surface up  
PREPARING THE REMOTE CONTROL  
INSERTING THE BATTERIES  
1.Open the battery compartment cover.  
2.Insert the new batteries. Make sure  
that the positive and negative terminals  
of the batteries are oriented indicated.  
3.Close the cover  
USING THE REMOTE CONTROL  
Face the remote control towards the  
player front face IR mark (remote  
control signal receiver).  
Operation angle: About +30 degree  
in each the direction of the front of  
the IR mark.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
GENERAL  
POWER REQUIREMENT......................................................................DC 12V  
CURRENT CONSUMPTION.................................................................15A  
POWER OUTPUT............................................................................... 4 X 25W  
RADIO SECTION  
For 3 Bands  
(Europe)  
FM  
For 2 Bands  
(Europe)  
FM  
For 2 Bands  
(U.S.A.)  
FM  
FREQUENCY RANGE  
87.5 to 108 MHz 87.5to 108 MHz 87.5 to 107.9 MHz  
USABLE SENSITIVITY...............................................................................3uV  
I.F FREQUENCY................................................................................10.7MHz  
MW  
MW  
AM  
FREQUENCY RANGE  
FREQUENCY RANGE  
522 to 1620 KHz 522 to 1620 KHz 530 to 1710 KHz  
LW  
144 to 290KHz  
LINE-OUT [OPTION]  
OUTPUT..........................................................500mV @ FM 10% THD POWER  
CD PLAYER  
SYSTEM.......................................................COMPACT DISC AUDIO SYSTEM  
USABLE DISC........................................................................COMPACT DISC  
SIGNAL FORMAT.........................................SAMPLING FREQUENCY 44.1KHz  
NO OF QUANTIZATION BITS 1 BIT  
FREQUENCY CHARACTERISTICS........................5-40Hz-5dB 10K-20KHz-5dB  
SIGNAL TO NOISE RADIO................................70dB [1KHz] [IEC-A NETWORK]  
NUMBER OF CHANNELS.................................................................2 STEREO  
CHASSIS DIMENSIONS................................................184[W] X54 [H] 170 [D]  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
Before going through the check list, check wiring connection.If any of  
the problems persist after check list has been made, consult your nearest  
service dealer.  
SYMPTOM  
NO POWER  
CAUSE  
SOLUTION  
If the power supply is properly  
connected to the car accessory  
terminal,switch the ignition key  
to "ACC"  
The car ignition switch is  
not on  
Replace the fuse  
The fuse is blown  
Remove the disc in the player,  
then put a new one  
Presence of disc inside the  
player.  
Insert the compact disc with  
the label facing upward  
Inserting the disc in reverse  
direction  
DISC CANNOT  
BE LOADED  
OR EJECTED  
The disc is extremely dirty  
or defective  
Clean the disc or try to play a  
new one  
Temperature inside the car Cool off or until the ambient  
is too high  
temperature return to normal  
Leave the player off for an hour  
then try again  
Condensation  
Volume is in minimum  
Adjust volume to a desired level  
Check wiring connection  
NO SOUND  
Wiring is not properly  
connected  
The installation angle is  
more than 30 degrees  
Adjust the installation angle less  
than 30 degrees  
SOUND SKIPS  
Clean the compact disc, then  
try to play a new one  
The disc is extremely dirty  
or defective disc  
Press the RESET button.  
Front panel is not properly fixed  
into its place  
The built-in microcomputer  
is not operating properly  
due to noise  
THE OPERA-  
TION KEYS  
DO NOT WORK  
The antenna cable is not  
connected  
THE RADIO  
DOES NOT  
WORK  
Insert the antenna cable firmly  
Select a station manually  
The signals are too weak  
88-C3950-02  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Cassette Player Portable Cassette Recorder User Guide
RCA Speaker SW200P User Guide
Roper Range 9761805 User Guide
Rotel Stereo Amplifier RA820BX4 User Guide
Samsung Clothes Dryer DV400EWHDWR User Guide
Samsung DVR SMT 190 User Guide
Samsung Flat Panel Television LA22N21B User Guide
Samsung Video Game Controller ML 2250 User Guide
Sennheiser Computer Hardware SKM 565G User Guide
Sennheiser Corded Headset HMEC 25 CA User Guide