Profoon Telecommunicatie Cordless Telephone PDX 1000 User Manual

USERS MANUAL  
PDX-1000  
Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ATTENTION: This telephone is not designed for making emergency  
telephone calls when the power fails. Make alternative arrangements  
for access to emergency services.  
SAFETY INFORMATION  
Read the safety instructions before first use of this phone.  
·
·
Use only the batteries supplied with this telephone.  
Do not use any mains adapter(s) other than the one(s) provided  
otherwise you may permanently damage your phone.  
Do not use the phone in damp humid conditions such as a  
bathroom. Do not expose the phone or batteries to water or fire.  
Do not dispose of used batteries with household waste or by  
burning.  
·
·
·
·
Do not use the handset(s) in an explosive hazard area.  
To prevent electric shock, never try to open the base or handset(s)  
enclosure.  
·
·
Avoid metallic contact (e.g. metal clips, keys) between the battery  
contacts and charging conductors.  
There is a slight chance that your phone could be damaged by an  
electrical storm. It is recommended that you unplug your phone  
from the mains supply and telephone socket during a storm.  
Because the phone works by sending radio signals between base sta-  
tion and handset, wearers of hearing aids may experience interference  
in the form of a humming noise.  
We advise that this phone should not be used near intensive care  
medical equipment or by persons with pacemakers.  
Your phone can interfere with electrical equipment such as answering  
machines, TV and radio sets, clock radios and computers if placed too  
close. It is recommended that you position the base unit at least one  
meter from such appliances.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
The PROFOON PDX-1000 series DECT telephones are cordless tele-  
communication systems, based on the DECT (Digital Enhanged Cord-  
less Telephone) technology.  
The PDX-1000 comes with one handset only. The PDX-1020,  
PDX-1030 and PDX-1040 models come with multiple handsets. The  
PDX-1000 series DECT telephones can only operate with the hand-  
set(s) supplied. It is not possible to extend your PDX-1000 series with  
more handsets.  
DECLARATION OF NETWORKCOMPATIBILITY  
The Profoon PDX-1000 series is designed for use on the ‘public  
switched telephone networks (analogue single-line)’ of telephone- and  
cable-companies inside the European Union.  
Each country and/or provider might require a different telephoneplug.  
The function Caller-ID is based on both the DTMF and the FSK sys-  
tem (automatic detection). It might be possible that you have to sub-  
scribe to this feature.  
The Profoon PDX-1000 series complies with the essential require-  
ments and provisions as described in the European Directive  
1999/5/EC.  
DECLARATION OF CONFORMITY  
The declaration of conformity is available  
on the website WWW.PROFOON.COM  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Usage  
Incoming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Outgoing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
On hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Receiving volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Call transfer / toggle / consultation . . . . . . . . . . . . . . . . . . . . . 9  
Intercom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Caller-Id . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Teleservices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Clip on call waiting (only FSK based system) . . . . . . . . . . . . 11  
Paging the handset(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Call transfer and network-services . . . . . . . . . . . . . . . . . . . . . 11  
Out of range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Settings:  
Ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Flashtime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
System failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Restore default function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Guarantee card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR TELEPHONE  
Program  
LCD display  
Recall  
Redial / Pause  
In Use LED  
Charge LED  
CID / Volume  
Page Key  
Talk / Off  
Memory  
Dialing keys  
Clear / Mute  
LCD DISPLAY ON THE HANDSET  
1
2
3
4
5
6
7
8
9
1. The phone number contains more than 12 digits. (the display only  
shows the last 12 digits.  
2. Batteries in the handset need recharging  
3. The phone is in use  
4. Memory dial records are being retrieved or set up  
5. The phone is in programming mode  
6. There is a new CID not reviewed yet  
7. The call is muted  
8. The ringer is turned off  
9. The handset is too far away from the base  
In idle state the handset shows the handsetnumber HS-x were x repre-  
sents “1”, “2”, “3” or “4”.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
1. Connect the output plug of the mains adapter to the socket on the  
bottom of the base unit and the mains adapter to the wall mains  
supply.  
2. Plug the mains adapter of the charger(s) (if supplied) into the wall  
mains supply.  
3. Place 2 AAA batteries, observing their polarities, into the battery  
compartment on the (each) handset.  
4. Slide the battery door(s) firmly into place.  
5. Connect the telephone lead to the telephone socket on the bottom  
of the base unit and to the wall phone socket.  
6. Place the handset(s) on the base unit (or on the charger(s)) and let  
the batteries charge for a full 14 hours before using.  
CAUTION  
Use only the mains adapter(s) supplied with this telephone. Incorrect  
adapter polarity or voltage can seriously damage the unit.  
Use only the charger(s) supplied with this telephone. Incorrect charger  
type can cause damage to the handset(s).  
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCOR-  
RECT TYPE. Refer to the original type supplied with this telephone.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
USAGE  
INCOMING:  
1. lift the handset and press  
to answer the call  
Refer to page 12 in case you want to change the ringersignal.  
OUTGOING:  
standard:  
1. press and wait for the dialtone  
2. key in the telephonenumber through the keyboard  
blockdialing:  
1. key in the number (use button C to correct)  
2. press  
3. the number will be dialed  
last number redial:  
1. press  
2. press , the last dialed number will be redialed (or press button C  
for over one second to return to the idle state)  
The capacity of the last dialed number is 20 digits.  
ON HOOK:  
1. press button or put the handset into the base or into the  
charger pod to go on hook.  
RECEIVING VOLUME:  
1. Press  
during the conversation to increase or decrease the  
receiving volume. This setting will be kept in memory.  
MUTE:  
1. Press button C to mute the call. Symbol  
is not be able to hear you but you are still able to hear the caller.  
is turned on. The caller  
2. Press button C again to unmute the call and turn the symbol  
off.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMORY:  
The memory of each handset of the PDX-1000 series has a capacity  
of 10 telephonenumbers of maximum 20 digits each.  
Programming:  
1. key in the number through the keyboard and press  
2. press one of the 10 key’s (0-9) of the keyboard  
Dialing:  
1. press  
2. press  
3. the number will be dialed  
and press the key under which the number is stored (0-9)  
Pause:  
In case you are connected through a PABX, a waiting time must be  
inserted direct after the prefix number. Press and keep it pressed  
until after one second a “P” comes in the display.  
CALL TRANSFER / TOGGLE / CONSULTATION:  
This feature is only available when you purchased a PDX-10xx telep-  
hone with multiple handsets.  
1. during the conversation press and keep it pressed until after one  
second the internal dialtone is heard, the CO line will be put on hold  
2. dial the internal number of the other handset  
3. as soon as the other handset answers the call, you have the  
following options:  
Call transfer: press  
to transfer the CO line to the other handset  
Toggle:  
by pressing button for one second, you can toggle  
between the other handset and the CO line  
Consulting:  
press  
after you have consulted the other handset  
and keep it pressed for about one second to return to  
the CO line  
In case the other handset does not answer your call, press  
to the CO line.  
to return  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERCOM:  
This feature is only available when you purchased a PDX-10xx telep-  
hone with multiple handsets.  
1. press  
, the outside dialtone is heard  
2. press and keep it pressed until after about one second the  
internal dialtone is heard  
3. dial the number of the other handset  
4. as soon as the other handset answers the call, you can have your  
intercom-conversation  
5. press  
to disconnect  
- in case the other handset does not answers the call, press  
disconnect  
to  
- in case you do not hear the external dialtone after pressing  
of the other handsets has a conversation on the outside line  
, one  
Attention: during an intercom call, your telephoneline is busy for inco-  
ming calls.  
CALLER-ID:  
During an incoming call, the number of the calling party comes on the  
display of your handset(s).  
Review:  
In case the sybol  
call.  
lights in the display, you have received a new  
1. press  
2. press  
to see the number of the last incoming call  
again to return to the idle state  
Call back:  
1. press  
2. press  
to get the number on the display  
to dial the number  
Attention: It might be possible that you have to subscribe to this featu-  
re. Please consult your provider.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TELESERVICES:  
Buttons and # are functionbuttons, needed for divers telecom-servi-  
ces (teleshopping, telebanking, etc) or to control divers telecom devi-  
ces (PABX, answering machines, etc). Refer to the concerning manu-  
al.  
CLIP ON CALL WAITING (only FSK based systems)  
If you have subscribed to this service, the telephone will show the  
phone number of another incoming call while you are talking on the  
phone.  
If you press R, the current call will be put on hold and you could talk  
with this second caller. Subsequent presses of button R will toggle you  
between these 2 callers.  
In any case, the LCD will show the phone number of the first caller.  
PAGING THE HANDSET(S):  
You can page or locate the handset(s) by pressing  
on the base.  
The handset(s) will produce the paging tone (same as ringer melody)  
for 30 seconds and LCD display shows "OOOO".  
You could stop the paging by pressing any key on the handset.  
Paging is not available when one handset is accessing the telephone  
line.  
This feature is affected by the ringer melody, ringer volume and ringer  
on/off that you've programmed.  
CALL TRANSFER AND NETWORK-SERVICES:  
Use the R key to activate special services from your telephone-compa-  
ny or to transfer a call in case you are connected through a PABX. The  
FLASH time is adjustable. (see page 12)  
OUT OF RANGE:  
* You will be alerted when the handset is too far away from the base.  
The symbol will turn on. Bring the handset nearer the base to  
move it back in range.  
* If you are talking on the phone, you'll hear an alert tone through the  
earpiece. If you fail to bring the handset back in range with the  
base, your call would be disconnected.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
RINGER:  
Rhythm and volume:  
1. press and keep it pressed until after about one second the  
symbol comes in the display  
2. press button 1, 2 or 3 to select another rhythm (you can hear this  
rhythm through the speaker)  
3. repeatedly press to select the desired level (you can hear this  
level through the speaker)  
when the display shows , the ringer is set to OFF  
to store the selected rhythm and volume  
4. press  
Shortcut to Turn Ringer On/Off:  
You can turn on/off the ringer by pressing and holding in standby  
mode. The symbol will turn on when the ringer is turned off.  
When the ringer is turned on using this shortcut method, the ringer  
volume will be set to medium.  
FLASHTIME:  
1. press  
and keep it pressed until after about one second the  
symbol comes in the display  
2. - press button R, and button 1 to select a flashtime of 100mS (this  
is the default setting)  
- press button R, and button 2 to select a flashtime of 300mS  
3. press to store the selected flashtime  
SYSTEM FAILURE  
In case of a possible system failure, please remove the battery-pack  
from the handset(s) and disconnect the power adapter and telephone  
connectioncord from the corresponding wall outlets. Wait several  
minuts and reconnect all. If this does not help, than please consult  
your dealer.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RESTORE DEFAULT FUNCTION  
The restore default function performs the following operations on the  
handset:  
• Clear CID log  
• Clear Redial buffer  
• Clear Phonebook entries  
• Set ringer melody to melody 1  
• Set ringer volume to 3  
• Set receiver volume to 2  
• Set flash duration to short  
PROCEDURE  
1. Remove the batteries from the handset  
2. Press and hold button  
3. Install the batteries, release button and wait for a ringing signal  
4. Press button 5 on the handset and wait untill you hear a click, all  
memories are now cleared and defaults are restored  
5. Remove again the batteries, wait a couple of seconds and re-install  
them again to power up the handset in a normal way.  
MAINTENANCE  
* Do not clean any part of your telephone with benzene, thinner or  
other solvent chemicals - this may cause permanent damage that is  
not covered by the guarantee. When necessary, clean it with a  
damp cloth.  
* Keep your telephone away from hot, humid conditions or strong  
sunlight.  
* Every effort has been made to ensure the highest standards of  
reliability for your PDX-1000 series telephone. However, if  
something does go wrong, please do not try to repair it yourself -  
consult your supplier.  
* Do not use your telephone outdoors in the rain, or handle it with wet  
hands - water can damage electrical equipment.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GUARANTEE CARD  
CUSTOMER:  
Name:  
Address:  
attach here your  
purchase ticket  
Zip-code:  
City:  
Telephone:  
Model & serialnumber:  
You have a guarantee of 24 MONTHS after the date of purchase of  
this Telephone. We guarantee during this period the free repair of  
defects caused by material- and construction faults. This at the impor-  
ters discretion. It is only possible to claim to the guarantee when you  
enclose your purchase ticket with the telephone.  
HOW TO ACT:  
If you notice a defect, consult the manual first. If this manual gives you  
no definite answer, consult your dealer with a clear description of your  
complaint. He will collect the device together with this guarantee card  
and the dated purchase ticket and he will take care of a prompt repair,  
respectively free sending to the importer.  
THE GUARANTEE EXPIRES:  
When used inexpert, faulty connections, leaking and faulty placed bat-  
teries, use of unoriginal parts or accessories, negligence and defects  
caused by fire, flood, stroke of lightning and natural disasters. With  
unqualified modifications or repairs by third persons. With incorrect  
transport without a suitable packing. If the device is not handed in with  
the correct filled in guarantee card and the purchase ticket.  
NOT UNDER THIS GUARANTEE: cords, plugs and batteries.  
All further responsibilities, in particular subsequent damages, are  
excluded.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0681  
ver3.0 Oct.2003  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Car Stereo System Max 700 User Manual
Peavey Music Mixer MP 600 User Manual
Philips Battery Charger LR6PX20C User Manual
Philips Bottle Warmer SCF255 11 User Manual
Philips Car Stereo System MCM1120 User Manual
Philips Clock Radio SJ T113632006 User Manual
Pioneer Stereo System HTS 570 User Manual
Planar Computer Monitor PD370 PD420 PD470 PD520 User Manual
POSIFLEX Business Machines Satellite Radio 16560900020 User Manual
Poulan Blower 3000B User Manual