PLD3283C
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Base Stand assemble
3.Mounting on the wall
This unit is VESA-complian,and is designed to be wall-mounted
with a VESA-compliant 4"x10"(101.6mmx254mm)mounting kit
designde for flat-panel TVs(not supplied).Mount this unit according
to the instructions included in the monting kit. Length of screw should
not exceed 8 mm
NOTE
Remove the base stand before mounting the unit on the wall.
4"
10"
Four mounting holes
(size M4 screw)
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
(For Service)
R
Audio in
L
VIDEO
Pr
Pb
Y
RF
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
1. Headphones
6. RF: Antenna connection
2. Coaxial: Digtial audio output
3. HDMI
7. YPbPr: Connect to the YPbPr
video output terminal of DVD
8. Video: Video input
4. VGA: PC video input
9. AUDIO IN R/L: Stereo audio input
10. USB Host port (For Service)
5. PC AUDIO: Connect it to the
audio output terminal of PC
Download from Www.Somanuals.com. All Manuals Search And Download.
sound from speakers
ASPECTꢀSelectsꢁtheꢁscreenꢁsize
UniversalꢁRemote Code:08F7
(Universal Rmote Control is not included)
Download from Www.Somanuals.com. All Manuals Search And Download.
adaptor
USB
(For Service)
R
Audio in
L
VIDEO
Pr
Pb
Y
RF
USB
(For Service)
USB
(For Service)
R
Audio in
L
R
Audio in
L
VIDEO
Pr
VIDEO
Pr
Pb
Y
Pb
Y
RF
RF
Download from Www.Somanuals.com. All Manuals Search And Download.
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
Note:Coaxial output
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.Customizing the PICTURE
3. Initial Setup
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the PICTURE.
3.1. Initial Installation
3. Use the Ÿ/ź bu ons to highlight an individual PICTURE
change the se and press the MENU to exit the menu.
, use the Ż/Ź
to
The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.
3.2. Audio/Video Source Selection
Turn on the TV by pressing the POWER button on TV
or on the remote control, press SOURCE and use the
direction buttons
/
to select the desired source
depending on the equipment you have connected (AV,
HDMI, VGA) or choose TV to enter these mode.
The PICTURE menu includes the following
:
3.3. DTT Mode Operations
Picture Mode
Contrast
Brightness
Color
Cycle among picture display modes: Standard, Dynamic, Mild, user.
Control the diīerence between the brightness and darkest regions of the
Use CH+ or CH- buttons to tune the desired channel, or enter the channel
number directly using the numeric keypad. Press OK to display on screen the
list of TV and radio channels (press the
show only the DTV, the analog TV channels, Radio channels, etc.).
picture.
Control the overall brightness of the picture.
Control the color.
/
buttons to sort by group and
Use MTS button to select the audio language broadcasting, CC button to
show or hide subtitles on screen and FAV button to see a list of your favorite
channels.
Tint
Controls the nt.
Increase this se ng to see crisp edges in the picture; decrease it for so
edges.
Sharpness
Color Temp.
Cycles among color modes: Normal, Warm, Cool.
4. SETTINGS
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Audio
4.2.
Customizing the TIMER Se ngs
4.3.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the AUDIO.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the TIMER.
3. Use the Ÿ/ź bu ons to highlight an individual AUDIO
change the se and press the MENU to exit the menu.
, use the Ż/Ź
to
3. Use the Ÿ/ź bu ons to highlight an individual TIMER
change the se and press the MENU to exit.
, use the Ż/Ź
to
The AUDIO menu includes the following op ons:
The TIMER menu includes the following op ons:
Sound Mode
Bass
Allow you to select among: Standard, Music, Movie and User.
Control the rela ve intensity of lower pitched sounds.
Control the rela ve intensity of higher pitched sounds.
Allow you to set up the sleep
among: 5min, 10min, 15min,
Sleep Timer
30min,45min, 60min, 90min, 120min, 180min, 240min and oī.
Allow you to set up the sleep
Eastern, Central and Mountain.
among: PaciĮc, Alaska, Hawaii,
Time Zone
Treble
To adjust the balance of the le and right sound track, or turn oī the volume
Daylight Saving Time
Allow you to turn on or oī the daylight saving
Balance
Surround
SPDIF Type
of the le and right sound track.
Allow you to select between Oī and On.
Allow you to select between PCM and RAW.
Audio Language Allow you to select audio language among: English, French and Spanish.
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4. Customizing the SETUP Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the SETUP.
3. Use the Ÿ/ź bu ons to highlight an individual SETUP
change the se and press the MENU to exit.
, use the Ż/Ź
to
H-Posi on
V-Posi on
Clock
Allow you to use the Ż/Ź bu ons to adjust the H Posi on.
Allow you to use the Ż/Ź bu ons to adjust the V Posi on.
Allow you to prolong the image.
Phase
Allow you to adjust the de
Auto
Select “Auto” and press the Ź bu on, the unit will
automa
adjust all items to achieve a best eīect.
Use the ź bu on to highlight the Close
bu on to enter into the following menu.
n item, then press the Ź
Close Cap on
The TIMER menu includes the following op ons:
Menu Language Allow you to select menu language among: English, Français and Español.
Transparency
Zoom Mode
Allow you to turn on or oī the transparency
Allow you to select the zoom mode among: Wide, Zoom, Cinema and
Normal.
Allow you to select the noise re
on mode among: Middle, Strong,
Noise Re
Advance
on
Kī͕tĞĂŬ͘
Input PC signal Įrst, then press SOURCE bu on to select VGA mode, press Ź
bu on to conĮrm.
CC Mode
Basic
Allow you to select the CC Mode among: Oī, On and CC
on Mute.
Allow you to select the basic sel on among: CC1, CC2,
CC3, CC4, Text1, Text2, Text3 and Text4.
Advanced
Allow you to select the advanced sel on among:
Service1, Service2, Service3, Service4, Service 5 and
Service6.
Op
Use the ź bu on to highlight the “Op on” item, then
press the Ź bu on to enter into the following menu.
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the LOCK Se ngs
4.5.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the LOCK.
3. Use the ź bu on to highlight “Enter Password” item, use the numeric keys to input 4-digital
password. A er you that, the screen will display the junior menu. A er
ngs, press menu
to exit.
NOTE: The factory password is 0000. The supervision password is 8899.
Use the Ÿ/ź bu ons to highlight the desired item, and
use the Ż/Ź bu ons to select.
Input
4-digital password
XVS
To turn on or oī the XVS fun on.
Restore Default
Restore all se ngs in SETUP menu to factory se ngs.
The LOCK menu includes the following op ons:
Use the ź bu on to select the “Change Password” item, then press the
Ź bu on to enter into the following menu.
Change Password
Input the new 4-digital password and input it again to conĮrm.
Allow you to turn on or oī the system lock.
System Lock
If you turn oī the system lock, then the following items (US, Canada, RRT
Se ng and Reset RRT) will unable to use.
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the ź bu on to highlight the “US” item, then press the Ź bu n to
enter into the following menu.
US
Use theź bu on to highlight the “Canada” item, then press Ź bu on to
enter into the following menu.
Canada
TV
Use the ź bu on to highlight the “TV” item, then press
Ź bu on to enter into the following menu.
Canada Eng
Canada Fre
Use the Ż/Ź bu ons to select among: E, C, C8+, G,
PG, 14+ and 18+.
Use the Ż/Ź bu ons to select among: E, G, 8ans+,
13ans+, 16ans+ and 18ans+.
RRT Se ng
Reset RRT
Allow you to reset the RRT se ng.
Use the Ÿ/ź bu ons to select the desired ra ng and
press the Ź bu on to block or unblock ra ng.
MPAA
The Movie ra ng (MPAA) is used for original movies rated
by the Mo Picture Associa on (MPAA) as broadcasted
on cable TV and not edited for television.
Use the Ÿ/ź bu ons to select N/A, G, PG, PG-13, R,
NC-17 or X.
RATING DESCRIPTION
General Audiences. Movie is appropriate for
G
all ages.
Parental Guidance Suggested. May contain
material not suited for younger viewers
Contains content that may not be
appropriate for viewers under the age of 13.
Restricted. Contains adult content, no one
under 17 admi d without parent.
No one 17 and under admi
PG
PG-13
R
NC-17
X
Adults only.
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4.6.Customizing the CHANNEL Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the CHANNEL.
3. Use the Ÿ/ź bu ons to highlight an individual CHANNEL
change the se and press the MENU to exit.
, use the Ż/Ź
to
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
If you select “Cable” as input signal in Antenna item, allows you to select
Cable System among: Auto, STD, IRC and HRC.
Use the ź bu on to highlight the “Start to Scan”, then press the Ź
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Allow you t add these channels which you desired as the favorite
channels. Use the Ÿ/ź bu ons to highlight the “Favorite” item, then
press the Ź bu on to enter into the following menu.
Favorite
The CHANNEL menu includes the following
:
Allows you to select antenna between Air and Cable.
Air/Cable
Auto Scan
If you select “Cable”, the following items (Favorite, Show/Hide, Channel
NO., Channel Label and DTV Signal) are unable to use.
Use the ź bu on to highlight the “Auto Scan” item, then press Ź bu on
to enter into the following menu.
Use the Ÿ/ź bu ons to highlight the desired item, then press OK
bu on to add or remove the highlighted channel as favorite.
Allow you to show or hide the channels.
Show/Hide
Use the Ÿ/ź bu ons to highlight the “Show/Hide” item, then press the
Ź bu on to enter into the following menu.
If you select “Air” as input signal in Antenna item, you can press the Ź
bu on to search the channels automa cally.
27
28
Download from Www.Somanuals.com. All Manuals Search And Download.
5. PC Mode
Se ng up your PC so ware (based on Windows XP)
The Windows display-se ngs for a typical computer are shown below. But the actual screen on
your PC will probably be diīerent, depending upon your par cular version of Windows and your
par cular video card. But even if your actual screen looks diīerent, the same, basic set-up
informa on will apply in almost all cases.
Use the Ÿ/ź bu ons to highlight the desired item, then press OK
bu on to show or hide the highlighted channel.
Channel No.
Channel Label
DTV Signal
Display the number of current channel.
Display the lable of current channel.
Display the quality of current DTV signal.
1. First, click on “Control Panel” on the Windows start menu.
2. When the control panel window appears, click on “Appearance and Themes” and a display
dialog-box will appear.
3. When the control panel window appears, click on “Display” and a display dialog-box will
appear.
4. Navigate to the “Se ng” tab on the display dialog-box. The correct size se ng (res
Op
1360×768.
If a ver cal-frequency
on exists on your display se ngs dialog box, the correct value is “60Hz”.
Otherwise, just click “Enter” and exit the dialog box.
Horizontal
Frequency (KHz)
Res
n
Standard Mode
Frequency (Hz)
720x400
31.47
70
DOS
VGA
640x480
800x600
37.9
37.9
48.4
64
60
60
60
60
SVGA
XVGA
SXVGA
1024x768
1366x768
29
Download from Www.Somanuals.com. All Manuals Search And Download.
6
TV
TV
TV
Download from Www.Somanuals.com. All Manuals Search And Download.
7
PLD3283C
1366 x 768
70W
AC 100-230V~, 50/60Hz
x 2
USB(For service)
and
Download from Www.Somanuals.com. All Manuals Search And Download.
|