¨
Model No. PFTL79400
Serial No.
USER'S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through direct assistance
from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
pation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps. To purchase a surge suppressor, see
your local PROFORM dealer or call 1-800-999-
3756 and order part number 146148.
2. Use the treadmill only as described in this
manual.
12. Keep the power cord and the surge suppres-
sor away from heated surfaces.
3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill.
13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the tread-
mill is not working properly.)
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
14. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should not be used by persons
weighing more than 250 pounds.
16. The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth-
ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
17. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the loca-
tion of the on/off switch.)
10. When connecting the power cord (see page 7), 18. Do not attempt to raise, lower, or move the
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO MOVE
THE TREADMILL on page 12.) You must be
able to safely lift 45 pounds (20 kg) in order to
raise, lower, or move the treadmill.
11. Use only a single-outlet surge suppressor that
is UL 1449 listed as a transient voltage surge
suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of
400 volts or less and a minimum surge dissi-
19. Do not change the incline of the treadmill by
placing objects under the treadmill.
20. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
21. Inspect and tighten all parts of the treadmill
regularly.
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
22. Never drop or insert any object into any
opening.
24. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer-
cial, rental, or institutional setting.
23.
DANGER:
Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the main-
tenance and adjustment procedures de-
scribed in this manual. Never remove the
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown below have been placed on your treadmill. If a decal is missing, or if it is not legible,
please call our Customer Service Department, toll-free, to order a free replacement decal (see ORDERING
REPLACEMENT PARTS on the back cover of this manual). Apply the decal in the location shown.
Note: The decal above is shown at 38% of actual size.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the PROFORM¨ PT 7.0 tread-
mill. The PT 7.0 treadmill combines advanced technol-
ogy with innovative design to let you enjoy an excellent
form of cardiovascular exercise in the convenience and
privacy of your home. And when youÕre not exercising,
the unique PT 7.0 can be folded up, requiring less than
half the floor space of other treadmills.
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is PFTL79400. The serial num-
ber can be found on a decal attached to the treadmill
(see the front cover of this manual for the location).
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department toll-free
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Water Bottle
Holder (Bottle
not included)
Book Holder
Accessory Holder
Pulse Sensor
Handrail
Key/Clip
RIGHT SIDE
Storage Latch
LEFT SIDE
On/Off Switch
Circuit
Breaker
Walking Belt
Foot Rails
Front
Wheel
Power
Cord
Cushioned Walking Platform
Rear Roller
Adjustment Bolts
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires a rubber mallet
and a phillips screwdriver
(not included).
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
Uprights (114) until the treadmill is in the position shown.
1
114
72
2. Using a rubber mallet, tap the Lock Knob Sleeve (91)
into the large hole in the left Upright (114). Align the two
2
small pins on the Lock Knob Spacer (122) with the small
holes in the left side of the Upright. Insert the Lock Knob
114
Spacer into the Upright. Make sure that the Lock Knob
Sleeve and the Lock Knob Spacer are fully inserted into
the Upright.
91
94
Remove the Lock Knob (90) from the Lock Pin (94).
Make sure that the Lock Pin Collar (93) and the Spring
(92) are on the Lock Pin. Insert the Lock Pin into the left
Upright (114) and tighten the Lock Knob onto it.
92
90
93
122
3. Refer to drawing 1 above and observe the two Rear Feet
(72) on the treadmill. If there is a space between the right
Rear Foot and the floor, follow the instructions below.
3
Ridges
Hold the treadmill firmly with both hands, and raise the
treadmill to the storage position as described on page 12.
Using a phillips screwdriver, remove the Screw (71) and the
Rear Foot (72) from each side of the treadmill. Remove the
Rear Foot Spacer (127) from the left Rear Foot and snap it
onto the right Rear Foot. Reattach both Rear Feet.
71
127
72
Hold the treadmill firmly with both hands, and lower the
treadmill as described on page 13.
4. Make sure that all parts of the treadmill are tightened before you use the treadmill. Keep the included
allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 15). To protect
the floor or carpet from damage, place a mat under the treadmill.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
1
HOW TO PLUG IN THE POWER CORD
Grounded Outlet Box
Surge Suppressor
Grounding Pin
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet
Grounding Pin
Grounded Outlet
Grounding Plug
installed by a qualified electrician.
2
Grounded Outlet Box
Adapter
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right).
Surge Suppressor
Lug
Metal Screw
To purchase a surge suppressor, see your local
PROFORM dealer or call 1-800-999-3756 and order
part number 146148. Use only a single-outlet surge
suppressor that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must
have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The treadmill is not compatible with
GFCI-equipped outlets.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE DIAGRAM
Program Indicators
Displays
LED Track
Note: If there is a sheet of clear plastic
on the face of the console, remove it.
Clip
Key
STEP-BY-STEP CONSOLE OPERATION
CAUTION:Before operating the
console, read the following precautions.
Note: The console can display speed and distance in
either miles or kilometers (see SPEED/INCLINE DIS-
PLAY on page 9). For simplicity, all instructions in this
section refer to miles.
¥ Do not stand on the walking belt when turn-
ing on the power.
Before operating the
console, make sure that
the on/off switch near the
power cord is in the on
¥ Always wear the clip (see the drawing above)
while operating the treadmill. If the key is
pulled from the console, the walking belt will
automatically stop.
On
Position
position. In addition,
make sure that the
power cord is properly
plugged in (see HOW TO PLUG IN THE POWER
CORD on page 7).
¥ Adjust the speed in small increments to
avoid sudden jumps in speed.
¥ To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console, and place only a sealed
water bottle in the water bottle holder.
When you are ready to begin exercising, step onto the
foot rails of the treadmill. Next, find the clip attached to
the key (see the drawing above), and slide the clip
onto the waistband of your clothing. Next, insert the
key into the console. After a moment, the displays and
various indicators will light. Test the clip by carefully
taking a few steps backward until the key is pulled
from the console. If the key is not pulled from the
console, adjust the position of the clip as needed.
Follow the steps below to operate the console.
FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features to help you get the most from your exercise
program. When the manual mode is selected, you can
adjust the speed and incline of the treadmill with a
touch of a button. As you exercise, four displays and an
LED ÒtrackÓ will provide continuous exercise feedback.
You can even measure your heart rate at any time
using the built-in pulse sensor.
HOW TO USE THE MANUAL MODE
Insert the key into the console.
1
In addition, the console offers four workout programs.
Each program automatically controls the speed and
incline of the treadmill as it guides you through an
effective workout.
A moment after the
key is inserted, the
four displays and var-
ious indicators on the
console will light.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME/SEGMENT
displayÑWhen the
manual mode is se-
lected, this display will
show the elapsed time.
When a workout pro-
gram is selected, this display will show the time
remaining in the program as well as the time re-
maining in the current ÒsegmentÓ (segments will
be explained in a later step). The display will
change from one number to the other every seven
seconds. The SEG indicator will light when the
time remaining in the current segment is shown.
Select the manual mode.
2
3
When the key is
inserted, the manual
mode will be se-
lected, as shown by
the MANUAL CON-
TROL indicator. If
you have selected a
workout program, press the PROGRAM button
repeatedly until the MANUAL CONTROL indicator
lights.
Press the START button and adjust the speed
of the walking belt.
DISTANCE/LAPS
displayÑThis display
shows the distance that
you have walked and
the number of 1/4-mile
laps you have com-
A moment after the START button is pressed, the
walking belt will begin to move. Hold the handrails
and carefully begin walking.
pleted. The display will change from one number
to the other every seven seconds. The LAPS indi-
cator will light when the number of laps is shown.
As you exercise, change the speed of the walking
belt as desired by pressing the SPEED buttons.
Each time one of the buttons is pressed, the
speed will change by 0.1 mph. The buttons can be
held down to change the speed quickly. Note: It
may take a few seconds for the walking belt to
reach the selected speed setting.
SPEED/INCLINE
displayÑThis display
shows the speed of the
walking belt and the in-
cline level of the tread-
mill. Every seven sec-
onds, the display will change from one number to
the other; the INCLINE indicator will light when
the incline is shown.
To stop the walking belt, press the STOP button.
The TIME/SEGMENT display will begin to flash.
To restart the walking belt, press the START but-
ton. To stop the walking belt and reset the dis-
plays, hold down the STOP button for two seconds.
Note: The console can
display distance and
speed in either miles or
kilometers. To see which
unit of measurement is
selected, hold down the
STOP button while inserting the key into the con-
sole. An ÒE,Ó for english miles, or an ÒM,Ó for met-
ric kilometers, will appear in the SPEED/INCLINE
display. To change the unit of measurement,
Adjust the incline of the treadmill as desired.
4
5
To change the incline of the treadmill, press the
INCLINE buttons. Each time one of the buttons is
pressed, the incline will change by 0.5%. The but-
tons can be held down to change the incline
quickly. Note: It may take a few seconds for the
treadmill to reach the selected incline setting.
Follow your progress with the LED track and
the four displays.
press the SPEED
reinsert the key.
▲
button. Then, remove and
The LED TrackÑ
The LED track repre-
sents a distance of
1/4 mile. As you ex-
ercise, the indicators
around the track will
light one at a time.
When you have com-
CALORIES/PULSE
displayÑThis display
shows the approximate
number of calories you
have burned during your
workout. When you use
the pulse sensor, this display will show your heart
rate (see step 6).
pleted 1/4 mile, the indicators will darken in a coun-
terclockwise direction and a new lap will begin.
7
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Measure your heart rate, if desired.
HOW TO USE THE WORKOUT PROGRAMS
6
To measure
your heart rate,
Insert the key into the console.
Metal Contacts
1
stand on the
foot rails and
place your
hands on the
A moment after the key is inserted, the four dis-
plays and various indicators on the console will
light.
metal contacts
on the pulse
sensor. Your
palms must be
Press the PROGRAM button to select a work-
out program.
2
When the key is inserted, the manual mode will be
selected, as shown by the MANUAL CONTROL
indicator. To select one of the workout programs,
press the PROGRAM button repeatedly until one
of the four program indicators lights.
resting on the
upper contacts,
and your fingers
must be touching the lower contactsÑavoid mov-
ing your hands. When your pulse is detected, the
heart-shaped indicator will flash steadily and
three dashes (Ñ Ñ Ñ) will appear in the CALO-
RIES/PULSE display. After a few seconds, your
heart rate will be shown. For the most accurate
heart rate reading, continue to hold the con-
tacts for about 15 seconds.
Program
Indicators
When you are finished exercising, press the
STOP button and remove the key.
7
Step onto the foot rails, press the STOP button,
and remove the key from the console. Keep the
key in a secure place. Note: If the displays and
various indicators on the console remain lit
when the key is removed, the console is in the
ÒdemoÓ mode. Refer to page 11 and turn off the
demo mode.
Each workout program will automatically control
the speed and incline of the treadmill to give you
an effective workout. The graphs on the left side
of the console show how the speed and incline
will change during each programÑthe red lines
show how the speed will change and the white
lines show how the incline will change. The num-
bers at the right end of each graph show the maxi-
mum speed and incline that the treadmill will
reach during the program. The scale below the
graphs shows how long each program will last.
Refer to the upper graph. This graph shows that
when the first program is selected, the speed and
incline will gradually increase during the first half
of the program and then gradually decrease dur-
ing the last half. The speed will reach a maximum
of 4 mph and the incline will reach a maximum of
8% during the program. The scale shows that the
program will last for twenty minutes.
When you are finished using the treadmill, unplug
the power cord and move the on/off switch to the
off position.
Press the START button to start the program
3
A moment after the START button is pressed, the
walking belt will begin to move. Hold the handrails
and carefully begin walking.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Each program is divided into several individual
Òsegments.Ó The speed and/or incline of the tread-
mill will automatically change at the beginning of
each segment.
Throughout the pro-
gram, the TIME/SEG-
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour.
MENT display will
show the time remain-
ing in the program as
well as the time re-
To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
maining in the current ÒsegmentÓ (see TIME/SEG-
MENT display on page 9.) When only three sec-
onds remain in the current segment, a series of
tones will be heard and the speed and/or incline of
the treadmill will automatically change. Make sure
to listen for the tones and be ready for speed
and/or incline changes.
The TIME/SEGMENT display
will show the total number of
hours the treadmill has been
used.
The program will continue in this way until no time
remains in the program. The walking belt will then
slow to a stop.
The DISTANCE/LAPS
display will show the total
number of miles that the
walking belt has moved.
If the program is too difficult or too easy, the speed
and incline of the treadmill can be adjusted at any
time with the SPEED and INCLINE buttons. How-
ever, when the next segment of the program
begins, the speed and incline will automatically
change to the next settings of the program.
An ÒE,Ó for english miles, or
an ÒM,Ó for metric kilometers,
will appear in the SPEED/
INCLINE display. Press the
To stop the program for a moment, press the STOP
button. The TIME/SEGMENT display will begin to
flash. To restart the program, press the START but-
ton. To stop the program and reset the displays,
hold down the STOP button for two seconds.
SPEED
▲
the unit of measurement.
button to change
IMPORTANT: The CALO-
RIES/PULSE display
should be blank. If a ÒdÓ ap-
pears in the display, the con-
Follow your progress with the LED track and
the four displays.
4
sole is in the ÒdemoÓ mode.
This mode is intended to be
See step 5 on page 9.
used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the displays and indicators on the console
will automatically light in a preset sequence, although
the buttons on the console will not operate. If a ÒdÓ ap-
pears in the CALORIES/PULSE display when the in-
Measure your heart rate, if desired.
See step 6 on page 10.
5
6
When the program is completed, remove the
key.
formation mode is selected, press the SPEED
ton so the CALORIES/PULSE display is blank.
▼
but-
Step onto the foot rails and remove the key from
the console. Keep the key in a secure place. Note:
If the displays and various indicators on the
console remain lit when the key is removed,
the console is in the ÒdemoÓ mode. Refer to
the information at the right and turn off the
demo mode.
To exit the information mode, remove the key from the
console.
When you are finished using the treadmill, unplug
the power cord and move the on/off switch to the
off position.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord. CAU-
TION: You must be able to safely lift 45 pounds (20 kg) in
order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown at
the right. CAUTION: To decrease the possibility of injury,
bend your legs and keep your back straight. As you
raise the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the treadmill until the latch pin is
aligned with the hole in the catch. Insert the latch pin into
the catch. Make sure that the latch pin is fully inserted
into the catch.
Open
Closed
Latch
Knob
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage
position in temperatures above 85¡ Fahrenheit.
Pin
Catch
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the latch pin
is fully inserted into the catch.
1. Hold the treadmill as shown and place one foot against a
wheel.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving the
treadmill. Do not attempt to move the treadmill over an
uneven surface.
3. Place one foot on the base, and carefully lower the treadmill
until it is resting in the storage position.
Base
Front Wheels
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO LOWER THE TREADMILL FOR USE
Open
1. Hold the upper end of the treadmill with your right hand as
shown. Using your left hand, pull the latch knob to the left
and hold it. Pivot the treadmill down until the frame is past
the pin. Slowly release the latch knob.
Closed
Latch
Knob
Pin
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. Do not drop the treadmill frame to
the floor. CAUTION: To decrease the possibility of in-
jury, bend your legs and keep your back straight.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLE-SHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-
free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
1. SYMPTOM: THE POWER DOES NOT TURN ON
a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged
into a properly grounded outlet (see page 7). Use only a single-outlet surge suppressor that is UL 1449
listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed
voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and 15 amps. Important: The treadmill is not compatible with
GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is inserted into the console as far as it will
go. See step 1 on page 8.
c. Check the circuit breaker located on the treadmill near the
power cord. If the switch protrudes as shown, the circuit
c
breaker has tripped. To reset the circuit breaker, wait for five
minutes and then press the switch back in.
Tripped
Reset
d. Check the on/off switch located on the treadmill near the
power cord. The switch must be in the on position.
d
On
Position
2. SYMPTOM: THE POWER TURNS OFF DURING USE
a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit
breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 8.
d. Make sure that the on/off switch is in the on position.
e. If the treadmill still will not run, please call our Customer Service Department, toll-free.
3. SYMPTOM: THE PULSE SENSOR DOES NOT FUNCTION PROPERLY
a. Make sure to stand on the foot rails and avoid moving your hands while measuring your heart rate.
Excessive movement may interfere with heart rate readings. If the pulse sensor is not used correctly, your
heart rate will not be shown.
b. Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings.
c. For the most accurate heart rate reading, hold the contacts for about 15 seconds.
d. For optimal performance of the pulse sensor, keep the contacts clean. The contacts can be cleaned with a
soft clothÑnever use alcohol, abrasives, or chemicals.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
4. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY
a. Remove the key from the console and UNPLUG THE POWER
CORD. Remove the screws from the hood and remove the hood.
a
1/8Ó
15
Locate the Reed Switch (16) and the Magnet (10) on the left side
of the Pulley (11). Turn the Pulley until the Magnet is aligned with
the Reed Switch. Make sure that the gap between the Magnet
and the Reed Switch is about 1/8Ó. If necessary, loosen the
Reed Switch Screw (15) and move the Reed Switch slightly.
Retighten the Screw. Re-attach the hood, and run the treadmill
for a few minutes to check for a correct speed reading.
11
10
16
Top
View
5. SYMPTOM: The walking belt slows when walked on
a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length.
b. If the walking belt is overtightened, treadmill performance may
b
decrease and the walking belt may be permanently damaged.
Remove the key and UNPLUG THE POWER CORD. Using the
3Ð4Ó
allen wrench, turn both rear roller adjustment bolts counterclock-
wise, 1/4 of a turn. When the walking belt is properly tightened,
you should be able to lift each side of the walking belt 3 to 4
inches off the walking platform. Be careful to keep the walking
belt centered. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is prop-
erly tightened.
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our
Customer Service Department, toll-free.
6. SYMPTOM: The walking belt is off-center
a. If the walking belt has shifted to the left, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn the
left rear roller adjustment bolt clockwise, and the right bolt coun-
terclockwise, 1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is cen-
tered.
a
b. If the walking belt has shifted to the right, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench, turn
the left rear roller adjustment bolt counterclockwise, and the right
bolt clockwise, 1/4 of a turn each. Be careful not to overtighten
the walking belt. Plug in the power cord, insert the key and run
the treadmill for a few minutes. Repeat until the walking belt is
centered.
b
7. SYMPTOM: The walking belt slips when walked on
a. If the walking belt slips when walked on, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn
both rear roller adjustment bolts clockwise, 1/4 of a turn. When
the walking belt is correctly tightened, you should be able to lift
each side of the walking belt 3 to 4 inches off the walking plat-
form. Be careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is properly tightened.
c
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
uses easily accessible carbohydrate calories for en-
ergy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the speed and incline of the tread-
mill until your heart rate is near the lowest number in
your training zone.
WARNING:
Before beginning this
or any exercise program, consult your physi-
cian. This is especially important for individu-
als over the age of 35 or individuals with pre-
existing health problems.
For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.
The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The sensor is intended only as an exercise aid
in determining heart rate trends in general.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone.
The following guidelines will help you to plan your ex-
ercise program. RememberÑthese are general guide-
lines only. For more detailed exercise information, ob-
tain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
WORKOUT GUIDELINES
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning and aerobic exercise.
Each workout should include the following three parts:
A Warm-upÑStart each workout with 5 to 10 minutes
of stretching and light exercise (see SUGGESTED
STRETCHES on page 17). A proper warm-up in-
creases your body temperature, heart rate and circula-
tion in preparation for exercise.
Training Zone ExerciseÑAfter warming up, increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exerciseÑnever
hold your breath.
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your Òtrain-
ing zone.Ó The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
A Cool-downÑFinish each workout with 5 to 10 min-
utes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-ex-
ercise problems.
To measure your heart rate during exercise, use the
pulse sensor on the console. If your heart rate is too
high or too low, adjust the speed and incline of the
treadmill.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be-
tween workouts. After a few months, you may com-
plete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretchÑnever bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
1
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
2
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your
back foot flat on the floor. Bend your front leg, lean forward and
3
move your hips toward the wall. Hold for 15 counts, then relax.
Repeat 3 times for each leg. To cause further stretching of the
achilles tendons, bend your back leg as well. Stretches:
Calves, achilles tendons and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold
for 15 counts, then relax. Repeat 3 times. Stretches:
5
Quadriceps and hip muscles.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LISTÑModel No. PFTL79400
R0900A
To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.
Key
No. Qty. Description
Key
No. Qty. Description
1
2
3
4
5
6
7
8
2
2
4
2
4
22
4
2
2
1
1
7
1
1
1
1
1
2
2
6
2
2
1
2
1
1
1
1
1
1
19
1
1
1
1
1
1
1
1
1
4
1
1
1
3
1
1
1
1
1
Center Track
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98*
99
100
1
1
1
1
1
1
1
1
1
20
1
2
4
2
2
4
2
1
1
1
2
2
1
1
1
2
2
2
1
1
2
1
1
2
2
8
1
1
4
1
1
1
1
1
1
1
1
1
1
1
Motor Pulley
Motor
Motor Tension Bolt
Motor Tension Washer
Star Washer
Motor Tension Nut
Shock
Incline Motor Shield
Right Foot Rail Cap
Belly Pan Fastener
Walking Belt
Frame Guide
Frame Guide Screw
Rear Isolator
Rear Isolator Screw
Small Isolator Screw
Roller Guard
Left Foot Rail Cap
Foot Rail Cap Screw
Foot Rail
Isolator
Isolator Screw
Deck Screw
Frame Pivot Bolt
Frame Spacer
Magnet
Front Roller/Pulley
Frame Pivot Nut
Incline Frame
Reed Switch Clip
Reed Switch Screw
Reed Switch
Sensor Wire
Incline Bolt
Incline Motor Spacer
Hood Bracket Screw
Hood Bracket
Tie Holder
Long Hood Bracket
Incline Motor Nut
Incline Motor
Incline Optic Disk
Stop Bracket
Small Nut
Small Bolt
Optic Switch
Screw
Foot Rail Decal
Electronics Bracket
Controller
Circuit Breaker
Power Cord
Grommet
On/Off Switch
Outlet Bracket
Motor Controller Wire
Plastic Stand-Off
Power Supply w/Stand-Off
Clip
Front Roller Adj. Bolt
Roller Adjustment Washer
Motor Assembly
Motor Pivot Bolt
Front Roller Nut
Motor Pivot Nut
Pulley/Flywheel/Fan
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46*
47
48
49
50
Belly Pan
Ground Screw
Roller Ground Wire
Rear Foot Screw
Rear Foot
Caution Decal
Right Endcap
20Ó Wire Harness
Rear roller Bolt
Endcap Spacer
Rear Roller
Frame
Left Endcap
Latch Catch Screw
Latch Catch
Pulse Bar Assembly
Pulse Bar Bolt
Pulse Bar Washer
Base Mount Screw
Left Base Mount
2Ó x 4 1/2Ó Spacer
Handrail Cap
Lock Knob
Lock Knob Sleeve
Lock Knob Spring
Lock Pin Collar
Lock Pin
Snap Ring
Main Wire Harness
Right Top Mount
Latch Assembly
Foot Spacer
Console
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Key
No. Qty. Description
Key
No. Qty. Description
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
1
2
1
1
1
4
1
9
1
4
2
2
2
1
2
6
6
1
Key/Clip
Book Holder Screw
Book Holder
Console Base
Console Plug
Hood Screw
Motor Hood
Belly Pan Screw/Shield Screw
Belly Pan
Wheel Spacer
Front Wheel
Wheel Bolt
Frame Endcap
Upright Base
Frame Pivot Bolt
Bumper
Bumper Screw
Allen Wrench
119
120
121
122
123
124
125
126
#
#
#
#
#
2
2
1
1
1
1
8
1
1
1
1
1
1
1
1
Warning Decal
Upright Base Endcap
Walking Platform
Lock Knob Spacer
Releasable Tie
Incline Belly Pan
8Ó Wire Tie
Incline Decal
24Ó Black Wire, M/Ring
4Ó Black Wire, 2 F
12Ó Green Wire, 2 Ring
8Ó Green Wire, 2 Ring
4Ó Blue Wire, 2 F
10Ó White Wire, 2 F
User's Manual
#
#
# These parts are not illustrated
* Includes all parts shown in the box
Specifications are subject to change without notice. For information about ordering replacement parts, see the
back cover of this manual.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give
the following information:
¥ The MODEL NUMBER OF THE PRODUCT (PFTL79400)
¥ The NAME OF THE PRODUCT (PROFORM¨ PT 7.0 treadmill)
¥ The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)
¥ The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the EXPLODED DRAWING and PART LIST
in the manual).
If possible, place the treadmill near your telephone for easy reference when calling.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All
products for which warranty claim is made must be received by ICON at one of its authorized service
centers with all freight and other transportation charges prepaid, accompanied by sufficient proof of pur-
chase. All returns must be pre-authorized by ICON. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal
usage or repairs not provided by an ICON authorized service center, to products used for commercial or
rental purposes, or to products used as store display models. No other warranty beyond that specifically
set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in-
cidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly,
the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 167836 R0900A
Printed in USA © 2000 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|