Model No. PFEX39930
Serial No.
USER'S MANUAL
Serial Number Decal
QUESTIONS?
If you have questions, or if
there are missing parts, we will
guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
Patent Pending
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website at
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Congratulations for selecting the new PROFORM®
CROSSTRAINER 55. The unique PROFORM®
CROSSTRAINER 55 combines a comfortable recum-
bent cycle with a convenient weight bench to let you
enjoy both aerobic exercise and strength training
exercise in the convenience of your home.
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
note the product model number and serial number
before calling. The model number is PFEX39930. The
serial number can be found on a decal attached to the
crosstrainer (see the front cover of this manual for the
location of the decal).
For your benefit, read this manual carefully before
you use the crosstrainer. If you have questions after
reading this manual, please call our Customer Service
Department toll-free at 1-800-999-3756, Monday
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Fan
Console
Handlebar
Handgrip Pulse Sensor
Water Bottle Holder (no water bottle is included)
WARNING Decal
Adjustment Knob
Wheel
Backrest
CAUTION Decal
Foot
Seat
Pedal/Strap
Adjustment Pin
Hand Weight
Adjustment Knob
CAUTION: The decals shown at the
right are found on the crosstrainer
in the locations indicated above. If
a decal is missing or illegible, call
toll-free 1-800-999-3756 to order a
free replacement decal. Apply the
decal in the location shown. Note:
The decals are not shown actual size.
CAUTION
•Do not sit on seatback or headrest
The machince could tip over,
causing injury.
•Always position the seat
adjustment in the full forward
setting before using the bench.
•The bench should be used only
with the weights provided.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two persons. Place all parts of the crosstrainer in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
allen wrenches, assembly requires a phillips screwdriver
and a rubber mallet
, an adjustable wrench
.
As you assemble the crosstrainer, use the drawings below to identify the small parts used in assembly. The
number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page
22. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-
assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M6 Flat
Washer (71)–1
M8 Nylon
Locknut (61)–4
M10 Zinc Split
Washer (85)–2
M10 Black Nylon
Locknut (63)–2
M10 Zinc Nylon
Locknut (66)–2
M4 x 16mm
Screw (73)–6
M4 x 22mm
Screw (91)–2
M6 x 25.4mm Button
Screw (79)–1
1/2” Nylon
Locknut (52)–1
M6 x 16mm
Screw (64)–5
M8 x 39mm Button
Bolt (76)–2
M8 x 14mm Button
Screw (88)–1
M6 x 50mm Screw (69)–1
M8 x 12mm Button
Screw (94)–4
M10 x 52mm Zinc Button
Bolt (68)–2
M10 x 45mm Button
Screw (74)–2
M10 x 112mm Carriage Bolt (65)–2
1/2” x 70mm Button Bolt (51)–1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. While another person lifts the front of the Frame (1),
attach the Front Stabilizer (2) to the Frame with two
M10 x 112mm Carriage Bolts (65) and two M10 Black
Nylon Locknuts (63). Make sure that the Front
Stabilizer is turned so the Wheels (30) are not
touching the floor.
1
30
65
30
2
1
63
2. Orient the Frame Rail (3) as shown, with the hexago-
nal holes in the indicated position. Insert the end of the
Frame Rail into the Rear Stabilizer Covers (7, 8) as
shown. Attach the Rear Stabilizer Covers with two M10
x 45mm Button Screws (74).
2
74
7, 8
3
Hexagonal
Holes
3. Locate the Knob (not shown) on the Seat Carriage (4).
Turn the Knob counterclockwise two or three turns to
loosen it. Next, pull the Knob, slide the Seat Carriage
onto the Frame Rail (3), and then release the Knob.
Make sure that the Seat Carriage is oriented as shown.
Move the Seat Carriage back and forth slightly until
it locks into position. Then, tighten the Knob.
3
68
85
4
3
1
Knob
Slide the Frame Rail (3) onto the indicated round tubes
on the Frame (1). Attach the Frame Rail with two M10
x 52mm Zinc Button Bolts (68), two M10 Zinc Split
Washers (85), and two M10 Zinc Nylon Locknuts (66).
66
7, 8
Set the six Hand Weights (not shown) on the Rear
Stabilizer Covers (7, 8) as shown on page 3.
4
4. With the help of a second person, slide the Backrest
Frame (5) onto the top of the Seat Carriage (4). Next,
slide the bracket on the Seat Frame (6) over the
rounded brackets on the Backrest Frame. Align the
indicated holes in the Seat Frame, the Backrest
Frame, and the Seat Carriage, and insert the 1/2” x
70mm Button Bolt (51) into the holes. Then, tighten the
1/2” Nylon Locknut (52) onto the Bolt.
6
51
5
52
Align
these
holes
29
Pivot the Backrest Frame (5) up until it is nearly vertical.
Insert the Adjustment Pin (29) into the lowest hole in
the rounded brackets on the Backrest Frame and
through the corresponding hole in the Seat Carriage (4).
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Attach the Seat (12) to the Seat Frame (6) with three
M6 x 16mm Screws (64).
5
12
6
64
64
6. Attach the Backrest (10) to the Backrest Frame (5)
with two M6 x 16mm Screws (64), an M6 x 50mm
Screw (69), and an M6 Flat Washer (71).
6
5
10
71
69
64
7. While another person holds the Upright (13) in the
position shown, connect the Upper Wire Harness (35)
to the Lower Wire Harness (36). Carefully pull the
upper end of the Upper Wire Harness to remove
any slack from the Wire Harnesses.
7
13
Slot
Turn the Knob (not shown) on the right side of the
Frame (1) counterclockwise two or three turns to
loosen it. Next, pull the Knob, insert the Upright (13)
into the Frame, and then release the Knob. Move the
Upright up and down slightly until it locks into
position. Be careful to avoid pinching the Wire
Harnesses (35, 36). Tighten the indicated M6 x
25.4mm Button Screw (79) into the slot in the side of
the Upright.
35
36
1
Knob
79
8
77
88
8. Slide the two Handlebar Collars (77) onto the Left
Handlebar (11). Insert the Right Handlebar (15) into
the Left Handlebar. Connect the Handlebar Collars, the
Left Handlebar, and the Right Handlebar with two M4 x
16mm Screws (73).
15
73
94
94
61
95
94
Attach the Handlebar Bracket (95) to the Left and
Right Handlebars (11, 15) with four M8 x 12mm Button
Screws (94).
94
73
77
11
Attach the Handlebar Bracket (95) to the Upright (13)
with two M8 x 39mm Button Bolts (76), two M8 Nylon
Locknuts (61), and an M8 x 14mm Button Screw (88).
13
76
6
Download from Www.Somanuals.com. All Manuals Search And Download.
9. While another person holds the Console (16) in the
position shown, connect the wire harness on the
Console to the Upper Wire Harness (35). Insert the
excess wire harness into the Upright (13).
9
Wire
Harness
73
16
Attach the Console (16) to the Upright (13) with four
M4 x 16mm Screws (73). Be careful to avoid pinch-
ing the wire harnesses.
13
35
Attach the Water Bottle Holder (89) to the Upright
(13) with two M4 x 22mm Screws (91).
89
91
10. The Console (16) requires four “D” batteries (not
included); alkaline batteries are recommended. Pull
open the battery drawer. Insert four batteries into the
battery drawer. Make sure that the batteries are ori-
ented as shown by the diagram inside the battery
drawer. Close the battery drawer. Note: When the bat-
teries are installed correctly, the fan will turn on for a
moment.
10
16
Batteries
Battery
Drawer
11. Identify the Left Pedal (24), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the Left Crank Arm
(42). Tighten the Right Pedal (not shown) clockwise
into the Right Crank Arm (not shown) in the same
way. Important: Tighten both Pedals as firmly as
possible. After using the crosstrainer for one
week, retighten the Pedals. For the best perfor-
mance, the Pedals must be kept properly tightened.
11
25
Adjust the Left Pedal Strap (25) to the desired position
and press the end of the Strap onto the tab on the Left
Pedal (24). Adjust the Right Pedal Strap (not shown)
in the same way.
24
Tab
42
12. Make sure that all parts of the crosstrainer are properly tightened. Note: Some hardware may be left
over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
crosstrainer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE RECUMBENT CYCLE
The crosstrainer features a recumbent cycle for aerobic exercise, and a convenient weight bench for strength
training exercise. To use the recumbent cycle, see pages 8 to 18. To use the weight bench, see page 19.
HOW TO ADJUST THE BACKREST
HOW TO ADJUST THE UPRIGHT
When the recum-
bent cycle is used,
the backrest should
be in the upright
position. To adjust
the backrest, first
pull out the adjust-
ment pin. Raise the
backrest until it is
nearly vertical, and
The upright can be
adjusted to the
height that is the
most comfortable for
you. To adjust the
upright, first turn the
indicated adjust-
ment knob counter-
clockwise two or
three turns to
Backrest
Upright
Knob
Brackets
then insert the
loosen it (if the knob
Pin
adjustment pin into
the indicated hole
in the rounded
brackets and the
corresponding hole
in the seat carriage.
is not loosened enough, it may scratch the upright).
Next, pull the knob, slide the upright to the desired
height, and then release the knob. Move the upright
up and down slightly until it locks into position.
Then, turn the knob clockwise until it is tight. IMPOR-
TANT: After you adjust the upright, make sure that
your knees will not touch the handgrip pulse sen-
sor when you pedal.
Seat
Carriage
HOW TO ADJUST THE SEAT
For effective exer-
cise, the seat
HOW TO ADJUST THE PEDAL STRAPS
should be in the
proper position. As
you pedal, there
should be a slight
bend in your knees
when the pedals
are in the farthest
position. To adjust
the seat, first turn
the indicated
To adjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
straps to the
desired positions,
and then press the
ends of the straps
back onto the tabs.
Strap
Rail
Tab
Knob
Seat
adjustment knob
counterclockwise
two or three turns
Carriage
HOW TO USE THE HAND WEIGHTS
to loosen it (if the knob is not loosened enough, it may
scratch the rail). Next, pull the knob, slide the seat car-
riage to the desired position, and then release the
The included hand weights can be used for a variety
of strength training exercises with the weight bench
(see page 19). In addition, the hand weights can be
knob. Move the seat carriage back and forth slightly used with the recumbent cycle. As you pedal, press
until it locks into position. Then, turn the knob clock-
wise until it is tight.
the hand weights over your head, raise the hand
weights out to your sides until your hands are level
with your shoulders, or do arm curls with the hand
weights.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Fan Button
Display Buttons
On/Reset Button
Resistance Buttons
FEATURES OF THE CONSOLE
portable stereo, computer, or VCR and play special
iFIT.com CD and video programs (iFIT.com CDs and
videocassettes are available separately). iFIT.com CD
and video programs automatically control the resis-
tance of the pedals and prompt you to vary your pace
as a personal trainer coaches you through every step
of your workout. High-energy music provides added
motivation. To purchase iFIT.com CDs and video-
cassettes, call toll-free 1-800-735-0768.
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is
selected, the resistance of the pedals can be changed
with the touch of a button. As you pedal, the console
will provide continuous exercise feedback. You can
even measure your heart rate using the built-in hand-
grip pulse sensor.
With the recumbent cycle connected to your computer,
In addition, the console offers six Smart programs. Each you can also go to our Web site at www.iFIT.com and
program automatically changes the resistance of the
pedals and prompts you to increase or decrease your
pace as it guides you through an effective workout.
access programs directly from the internet. Explore
www.iFIT.com for more information.
To use the manual mode of the console, see page
10. To use a Smart program, see page 12. To use
an iFIT.com CD or videocassette, see page 16. To
use a program directly from our Web site, see page
17.
The console also features iFIT.com interactive technol-
ogy. Having iFIT.com interactive technology is like hav-
ing a personal trainer in your home. Using a stereo
audio cable (available at electronics stores), you can
connect the recumbent cycle to your home stereo,
9
Download from Www.Somanuals.com. All Manuals Search And Download.
seconds. If you use the handgrip pulse sensor,
the display will also show your heart rate (see
step 5 on page 11).
HOW TO USE THE MANUAL MODE
Turn on the console.
To view only the distance
1
Upper Button
you have pedaled or the
number of calories or fat
calories you have burned,
press the upper button on
the left side of the large
display until only the word
DISTANCE, CALORIES, or
Note: The console requires four 1.5V “D” batteries
(see assembly step 10 on page 7).
To turn on the console, press the On/Reset button
or begin pedaling. (See the drawing on page 9 to
identify the On/Reset button.)
FAT CALORIES appears in the upper section of
the large display. Make sure that the word SCAN
does not appear. To again view the distance you
have pedaled and the numbers of calories and
fat calories you have burned, press the upper
button until the word SCAN reappears.
Select the manual mode.
2
Each time the console is
turned on, the manual
mode will be selected. If a
program has been select-
ed, select the manual
The center of
the large display
will show the
elapsed time and
mode by pressing the
Program button repeated-
ly until the letters RPM
appear in the small display.
your current pace
(pace is shown in
Begin pedaling and change the resistance of
the pedals as desired.
minutes per mile). The display will change from
one number to the other every few seconds.
Note: When a program is selected, the display
will show the time remaining in the program
instead of the elapsed time.
3
4
As you pedal, change the resistance of the ped-
als by pressing the + and – buttons below the
large display. There are ten resistance levels—
level 10 is the most challenging. Note: After the
buttons are pressed, it will take a few seconds for
the resistance to reach the selected setting.
To view only the elapsed time or your pace, press
the center button on the left side of the large dis-
play until only the word TIME or PACE appears.
Make sure that the word SCAN does not appear.
To view both the elapsed time and your pace,
press the center button until the word SCAN
reappears.
Follow your progress with the small display
and the large display.
The small display will
show your pedaling pace,
in revolutions per minute
(RPM). The indicator bar
in the small display will
increase or decrease in
length as you increase or
decrease your pedaling
pace.
The lower sec-
tion of the large
display will show
your pedaling
speed and the
resistance level.
The display will change from one number to the
other every few seconds.
Indicator Bar
The upper sec-
tion of the
large display
will show the
distance you
have pedaled
and the numbers of calories and fat calories you
have burned (see FAT BURNING on page 18 for
an explanation of fat calories). The display will
change from one number to the next every few
To view only your pedaling speed or the resis-
tance level, press the lower button on the left
side of the large display until only the word
SPEED or RESISTANCE appears. Make sure
that the word SCAN does not appear. To view
both your pedaling speed and the resistance
level, press the lower button until the word SCAN
reappears.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To reset the displays, press the On/Reset button.
For the most accurate heart rate reading, continue
to hold the handgrips for about 30 seconds. Note:
When you first hold the handgrips, the large dis-
play will show your heart rate continuously for 30
seconds. The display will then show your heart
rate along with other feedback modes.
Note: The con-
sole can show
speed and dis-
tance in either
miles or kilo-
meters. The let-
Turn on the fan if desired.
6
ters MPH or KM/H will appear in the lower section
of the large display to show which system of mea-
surement is selected. To change the system of
measurement, hold down the On/Reset button for
about six seconds. Note: When the button is held
down, the fan will turn on for a moment. When the
batteries are replaced, it may be necessary to res-
elect the desired system of measurement.
To turn on the
fan at low speed,
press the fan
button. To turn
on the fan at
Thumb
Wheel
high speed,
Fan
press the fan
Button
button a second
Measure your heart rate if desired.
If there are
time. To turn off
the fan, press the fan button a third time.
5
thin sheets of
plastic on the
metal contacts
on the hand-
grips, peel off
the plastic. To
use the hand-
grip pulse sen-
sor, hold the handgrips with your palms resting
against the metal contacts. Avoid moving your
hands. When your pulse is detected, the heart-
shaped indicator in the large display will flash
each time your heart beats. After a moment, two
dashes (– –) will appear and then your heart rate
will be shown.
Rotate the thumb wheel on the right side of the
console to pivot the fan to the desired angle.
Metal
Contacts
When you are finished exercising, the console
will automatically turn off.
7
If the pedals are not moved for a few seconds,
the displays will pause and the time will flash in
the large display.
If the pedals are not moved and the console but-
tons are not pressed for a few minutes, the con-
sole will turn off to conserve the batteries.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The target pace
for the current
period will be
shown by the
arrows in the
small display. To
pedal at the target
pace, simply
increase or decrease your pace until there is one
arrow pointing to each segment of the indicator
bar (see the drawing above). At the end of each
period, the number of arrows will change if a dif-
ferent target pace is programmed for the next
period. When the number of arrows changes,
change your pace until there is again one arrow
pointing to each segment of the indicator bar.
Important: The target pace is intended only to
provide a goal. Your actual pace may be slow-
er than the target pace, especially during the
first few months of your exercise program.
Make sure to pedal at a pace that is comfort-
able for you.
HOW TO USE A SMART PROGRAM
Indicator
Bar
Each Smart program will automatically change the
resistance of the pedals and prompt you to increase or
decrease your pace as it guides you through an effec-
tive workout. Programs 1 and 2 are weight loss pro-
grams, programs 3 and 4 are aerobic programs, and
programs 5 and 6 are high-performance programs.
Arrows
Follow the steps below to use a Smart program.
Turn on the console.
1
See step 1 on page 10.
Select one of the Smart programs.
2
Each time the console is
turned on, the manual
mode will be selected. To
select a Smart program,
press the Program button
repeatedly until the num-
ber 1, 2, 3, 4, 5, or 6
appears in the small dis-
play.
During the program, the center of the large dis-
play will show the time remaining in the program.
If you stop pedaling for a few seconds, the dis-
plays will pause and the time will flash. If you
continue pedaling after the program is completed,
the displays will continue to show exercise feed-
back.
Begin pedaling to start the program.
3
To start the program, simply begin pedaling. Each
Smart program consists of 20 or 30 one-minute
periods. One resistance level and one target pace
are programmed for each period. (The same
resistance level and/or target pace may be pro-
grammed for two or more consecutive periods.)
Follow your progress with the large display.
4
5
6
7
See step 4 on page 10.
Measure your heart rate if desired.
See step 5 on page 11.
At the end of each period of the program, the
resistance of the pedals will automatically change
if a different resistance level is programmed for
the next period. Note: If the resistance level is too
high or too low, you can change it by pressing the
+ and – buttons below the large display. However,
when the current period is completed, the resis-
tance of the pedals will automatically change if a
different resistance level is programmed for the
next period.
Turn on the fan if desired.
See step 6 on page 11.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 11.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR PORTABLE STEREO
HOW TO CONNECT YOUR CD PLAYER, VCR,
OR COMPUTER
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
1/8” LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
To use iFIT.com CDs, the recumbent cycle must be
connected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
13 and 14 for connecting instructions. To use iFIT.com
videocassettes, the recumbent cycle must be con-
nected to your VCR. See page 15 for connecting
instructions. To use iFIT.com programs directly from
our Web site, the recumbent cycle must be connected
to your home computer. See page 14 for connecting
instructions.
A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the AUDIO OUT jack on your stereo.
A/B
AUDIO OUT
LINE OUT
RIGHT
LEFT
HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT
and PHONES jacks, see instruction A below. If
your CD player has only one jack, see instruction B.
A. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your CD player.
Plug your headphones into the PHONES jack.
Audio Cable
B. Refer to the drawing above. Plug one end of a 1/8”
to 1/8” stereo audio cable (available at electronics
stores) into the jack beneath the console. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
A
PHONES LINE OUT
LINE OUT
PHONES
C. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your stereo. Plug your headphones into the
other side of the Y-adapter.
Head-
phones
Audio
Cable
B. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your CD player. Plug your headphones into the
other side of the Y-adapter.
C
PHONES
1/8”
Y-adapter
Audio
Cable
B
PHONES
Headphones
PHONES
1/8”
Y-adapter
Audio
Cable
Headphones
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 1/8” LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your stereo.
A. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your computer.
A
A
CD
LINE OUT
VCR
Amp
LINE OUT
LINE OUT
Audio
Cable
Audio Cable
B. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your computer. Plug your headphones or speak-
ers into the other side of the Y-adapter.
B. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack beneath
the console. Plug the other end of the cable into an
RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the wire
into the unused side of the Y-adapter. Plug the Y-
adapter into the LINE OUT jack on your stereo.
B
B
CD
PHONES
VCR
Amp
LINE OUT
1/8”
Y-adapter
Audio Cable
RCA
Y-adapter
Headphones/Speakers
Audio
Cable
Wire removed from
LINE OUT jack
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR VCR
B. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into an RCA Y-adapter (available at electron-
ics stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR
and plug the wire into the unused side of the Y-
adapter. Plug the Y-adapter into the AUDIO OUT
jack on your VCR.
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 14.
A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the AUDIO OUT jack on your VCR.
B
ANT IN
.
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
A
ANT IN
.
VIDEO AUDIO
IN
RCA
Y-adapter
RF OUT
CH
3
4
OUT
AUDIO OUT
RIGHT
LEFT
Audio
Cable
Wire removed from
AUDIO OUT jack
Audio Cable
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The program will function in almost the same way
as a Smart program (see step 3 on page 12).
However, an electronic “chirping” sound will alert
you when the resistance level and/or the target
pace is about to change.
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
To use iFIT.com CDs or videocassettes, the recum-
bent cycle must be connected to your portable CD
player, portable stereo, home stereo, computer with
CD player, or VCR. See HOW TO CONNECT YOUR
CD PLAYER, VCR, OR COMPUTER on page 13. To
purchase iFIT.com CDs and videocassettes, call
toll-free 1-800-735-0768.
Note: If the resistance of the pedals and/or the
target pace does not change when a “chirp” is
heard:
• Make sure that the indicator near the iFIT.com
button is lit.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con-
sole may not detect the program signals.
Follow the steps below to use an iFIT.com CD or
video program.
Turn on the console.
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
1
See step 1 on page 10.
Follow your progress with the large display.
See step 4 on page 10.
Select the iFIT.com mode.
5
6
7
8
2
Each time the console is
turned on, the manual
mode will be selected. To
select the iFIT.com mode,
press the iFIT.com button.
The indicator near the
button will light and the
letters IF will appear in
the small display.
Measure your heart rate if desired.
See step 5 on page 11.
Turn on the fan if desired.
See step 6 on page 11.
When you are finished exercising, the console
will automatically turn off.
Insert the iFIT.com CD or videocassette.
3
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
See step 7 on page 11.
Press the play button on your CD player or
VCR.
4
A moment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s
instructions.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
4
5
6
Follow the desired links on our Web site to
select a program.
Our Web site at www.iFIT.com allows you to play
iFIT.com programs directly from the internet. To use
programs from our Web site, the recumbent cycle
must be connected to your computer. See HOW TO
CONNECT YOUR COMPUTER on page 14. In addi-
tion, you must have an internet connection and an
internet service provider. A list of specific system
requirements will be found on our Web site.
Follow the on-line instructions to start the
program.
When you start the program, an on-screen count-
down will begin.
Return to the recumbent cycle and begin
pedaling.
7
Follow the steps below to use a program from our
Web site.
When the on-screen countdown ends, the pro-
gram will begin. The program will function in
almost the same way as a Smart program (see
step 3 on page 12). However, an electronic “chirp-
ing” sound will alert you when the resistance level
and/or the target pace is about to change.
Turn on the console.
1
See step 1 on page 10.
Select the iFIT.com mode.
2
Follow your progress with the large display.
See step 4 on page 10.
Each time the console is
turned on, the manual
mode will be selected. To
select the iFIT.com mode,
press the iFIT.com button.
The indicator near the
button will light and the
letters IF will appear in
the small display.
8
Measure your heart rate if desired.
See step 5 on page 11.
9
When you are finished exercising, the console
will automatically turn off.
10
Go to your computer and start an internet
connection.
3
See step 7 on page 11.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
RECUMBENT CYCLE EXERCISE GUIDELINES
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber in your training zone as you exercise. For maxi-
mum fat burning, adjust the intensity of your exercise
until your heart rate is near the middle number in your
training zone as you exercise.
WARNING:
Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for persons over the age of 35
or persons with pre-existing health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exer-
cise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone as you exercise.
The following guidelines will help you to plan your
workouts using the recumbent cycle. Remember that
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Each workout should include the following three parts:
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise
program, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age. The three numbers are your “training zone.”
The lower two numbers are recommended heart rates
for fat burning; the highest number is the recommend-
ed heart rate for aerobic exercise.
To maintain or improve your condition, plan three
workouts on the recumbent cycle each week. After a
few months of regular exercise, you may complete up
to five workouts each week if desired. Note: You may
wish to use the recumbent cycle and the weight
bench on alternating days. For example, plan aerobic
workouts on Monday, Wednesday, and Friday, and
plan weight training workouts on Tuesday, Thursday,
and Saturday. Make sure to rest for at least one full
day each week to give your body time to regenerate.
CAUTION: It is very important to avoid overdoing
it during the first few months of your exercise pro-
gram, and to progress at your own pace.
Fat Burning
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
18
Download from Www.Somanuals.com. All Manuals Search And Download.
WEIGHT BENCH EXERCISE GUIDELINES
alternating days. For example, plan weight training
workouts on Tuesday, Thursday, and Saturday, and
plan aerobic workouts on Monday, Wednesday, and
Friday. Make sure to rest for at least one full day each
week to give your body time to regenerate. CAUTION:
It is very important to avoid overdoing it during the
first few months of your exercise program, and to
progress at your own pace.
WARNING:
Before beginning any
exercise program, consult your physician.
This is especially important for persons over
the age of 35 or persons with pre-existing
health problems.
HOW TO ADJUST THE BACKREST
Begin each workout with five to eight minutes of
stretching and light exercise to warm up. A proper
warm-up increases your body temperature, heart rate,
and circulation in preparation for exercise.
The backrest can be adjusted to any of four positions:
the inclined (upright) position, the semi-inclined posi-
tion, the flat position, and the declined position.
After warming up, perform a selection of weight train-
ing exercises. The chart on the backrest shows four
exercises that can be performed. Consult a reputable
book to find other exercises that can be performed
using hand weights and a weight bench. To give bal-
ance to your workouts, vary the exercises from work-
out to workout. Begin with 1 set of 12 repetitions for
each exercise. (A “repetition” is one complete cycle of
an exercise, such as one sit-up. A “set” is a series of
repetitions performed without a pause.) As your fitness
level increases, perform 2 or 3 sets for each exercise.
Always rest for at least 1 minute after each set. When
you can complete 3 sets of 12 repetitions without diffi-
culty, you may choose to use heavier weights.
CAUTION: The crosstrainer includes three pairs of
hand weights. Do not use other weights with the
crosstrainer.
To adjust the backrest, first adjust the seat to the
farthest forward position (see HOW TO ADJUST
THE SEAT on page 8). Next, pull out the adjustment
pin. Pivot the backrest to the desired position, and
then insert the pin into one of the holes in the rounded
brackets and the corresponding hole in the seat car-
riage (see the inset drawing). Note: When the backrest
is in the declined position, the seat will also be declined.
CAUTION: Never sit on the backrest or the head-
rest; doing so could cause the crosstrainer to tip,
resulting in injury.
Brackets
Decline
Seat
Flat
Finish each workout with five to eight minutes of
stretching to cool down. This will increase your flexibility
and will help to prevent soreness.
Semi-inclined
Pin
Inclined
EXERCISE FORM
Backrest
For the best results, correct form is important.
Maintaining proper form means moving through the full
range of motion for each exercise, and moving only
the appropriate parts of the body. Make sure to per-
form each exercise with a smooth, steady motion.
Exhale as you exert yourself, and inhale as you return
to the starting position; never hold your breath.
STRENGTH TRAINING GUIDELINES
STAYING MOTIVATED
The weight bench can be used for a variety of exercis-
es designed to trim, tone, and strengthen the body.
Please read these guidelines before using the weight
bench.
For motivation, try listening to music or watching tele-
vision while you exercise. Use a calendar to keep a
record of your workouts, and record key body mea-
surements at the end of every month. Remember, the
key to lasting results is to make exercise a regular and
enjoyable part of your daily life.
It is recommended that your strength training program
include 3 workouts each week. Note: You may wish to
use the weight bench and the recumbent cycle on
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.
1
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times. Stretches: Hamstrings, back of knees and
back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended leg.
Reach toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times for each leg. Stretches: Hamstrings, lower
back and groin.
3. Calf/Achilles Stretch
3
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat 3
times for each leg. To cause further stretching of the achilles ten-
dons, bend your back leg as well. Stretches: Calves, achilles ten-
dons and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your but-
tocks as possible. Hold for 15 counts, then relax. Repeat 3 times
for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
5
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the crosstrainer regu-
larly. Replace any worn parts immediately.
• Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
To clean the crosstrainer, use a damp cloth and a
small amount of mild soap. Important: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
• For the most accurate heart rate reading, hold the
metal contacts for about 15 seconds.
• For optimal performance of the handgrip pulse sen-
sor, keep the metal contacts clean. The contacts
can be cleaned with a soft cloth—never use alco-
hol, abrasives, or chemicals.
BATTERY REPLACEMENT
If the console display becomes dim, the batteries
should be replaced; most console problems are the
result of low batteries. See assembly step 10 on page
7 for replacement instructions. Note: The console
requires four “D” batteries.
HOW TO MOVE THE CROSSTRAINER
Before moving the crosstrainer, remove the hand
weights and adjust the seat to the position shown in
the drawing below. Then, stand behind the crosstrain-
er, hold the rail in the indicated location, and lift the
rail until the crosstrainer can be moved on the front
wheels. Carefully move the crosstrainer to the desired
location and then lower it. CAUTION: To decrease
the possibility of injury, bend your legs and keep
your back straight as you lift the rail and move the
crosstrainer; make sure to lift with your legs
rather than your back.
HOW TO LEVEL THE CROSSTRAINER
After the
crosstrainer has
been moved to
the location
where it will be
used, make sure
that both ends of
front stabilizer
are touching the
Foot
floor. If the
crosstrainer
Wheel
rocks slightly during use, turn one or both of the feet
under the front stabilizer until the rocking motion is
eliminated.
Lift
Here
HANDGRIP PULSE SENSOR TROUBLESHOOTING
• Avoid moving your hands while using the handgrip
pulse sensor. Excessive movement may interfere
with heart rate readings.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. PFEX39930
R0703A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
2
1
2
1
1
2
1
1
1
1
1
1
2
1
1
1
1
4
1
1
2
2
Frame
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
#
1
1
1
1
1
1
2
1
2
1
4
5
2
2
7
2
2
1
2
1
8
1
5
12
2
4
2
2
2
1
2
4
1
4
2
2
2
1
1
1
2
2
1
2
4
1
1
3
Backrest Frame Endcap
1/2” x 70mm Button Bolt
1/2” Nylon Locknut
Belt
Pulley/Crank
M6 x 25mm Bolt
Flange Screw
Right Crank Arm
M6 Eyebolt
“U” Bracket
Front Stabilizer
Frame Extension
Seat Carriage
Backrest Frame
Seat Frame
Rear Stabilizer Cover
Front Stabilizer Cover
Rear Stabilizer
Backrest
Left Handlebar
Seat
Upright
Upright Bushing
Right Handlebar
Console
Left Side Shield
Right Side Shield
Side Shield Cover
Seat Carriage Bushing
Small Hand Weight
Medium Hand Weight
Large Hand Weight
Left Pedal
Left Pedal Strap
Right Pedal
Right Pedal Strap
Adjustment Knob
Adjustment Pin
Wheel
Left Front Endcap
Right Front Endcap
Foot
Adjustment Motor
Upper Wire Harness
Lower Wire Harness
Flywheel
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
M6 Nut
M8 Nylon Locknut
Flywheel Washer
M10 Black Nylon Locknut
M6 x 16mm Screw
M10 x 112mm Carriage Bolt
M10 Zinc Nylon Locknut
“C” Magnet Bracket
M10 x 52mm Zinc Button Bolt
M6 x 50mm Screw
M5 x 7mm Screw
M6 Flat Washer
M4 x 25mm Screw
M4 x 16mm Screw
M10 x 45mm Button Screw
M4 x 38mm Round Head Screw
M8 x 39mm Button Bolt
Handlebar Collar
M5 Nut
M6 x 25.4mm Button Screw
M6 x 72mm Button Screw
M5 x 12mm Bolt
Reed Switch Clamp
M5 Nylon Locknut
M4 x 12mm Round Head Screw
M10 Zinc Split Washer
Foam Grip
Magnet
M6 Large Washer
Flywheel Axle
Flywheel Bearing
“C” Magnet
M8 x 14mm Button Screw
Water Bottle Holder
Handlebar Foam
M4 x 22mm Screw
M4 x 8mm Screw
Seat Frame Endcap
M8 x 12mm Button Screw
Handlebar Bracket
User’s Manual
Left Crank Arm
Reed Switch/Wire
Crank Bearing Assembly
M5 Flat Washer
Adjustment Cable
Return Spring
M6 Nylon Locknut
Seat Bushing
#
Allen Wrench
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. PFEX39930
R0703A
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
• The MODEL NUMBER of the product (PFEX39930)
• The NAME of the product (PROFORM® CROSSTRAINER 55)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 22)
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-
use, improper or abnormal usage or repairs not provided by an ICON authorized service center, products
used for commercial or rental purposes, or products used as store display models. No other warranty
beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 198386 R0703A
Printed in China © 2003 ICON Health and Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|